API tools faq
paste
Advertisement
pgpfox

sdb

pgpfox
Nov 16th, 2019
105
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
Bash 9.83 KB | None | 0 0
raw download clone embed print report
  1. smartctl 6.6 2017-11-05 r4594 [x86_64-linux-5.0.0-21-generic] (local build)
  2. Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family:     Seagate Barracuda 7200.14 (AF)
  6. Device Model:     ST1000DM003-1ER162
  7. Serial Number:    Z4YADN2Y
  8. LU WWN Device Id: 5 000c50 087437368
  9. Firmware Version: CC45
  10. User Capacity:    1,000,204,886,016 bytes [1.00 TB]
  11. Sector Sizes:     512 bytes logical, 4096 bytes physical
  12. Rotation Rate:    7200 rpm
  13. Form Factor:      3.5 inches
  14. Device is:        In smartctl database [for details use: -P show]
  15. ATA Version is:   ACS-2, ACS-3 T13/2161-D revision 3b
  16. SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
  17. Local Time is:    Sat Nov 16 19:49:39 2019 UTC
  18. SMART support is: Available - device has SMART capability.
  19. SMART support is: Enabled
  20.  
  21. === START OF READ SMART DATA SECTION ===
  22. SMART overall-health self-assessment test result: PASSED
  23.  
  24. General SMART Values:
  25. Offline data collection status:  (0x82) Offline data collection activity
  26.                     was completed without error.
  27.                     Auto Offline Data Collection: Enabled.
  28. Self-test execution status:      (   0) The previous self-test routine completed
  29.                     without error or no self-test has ever
  30.                     been run.
  31. Total time to complete Offline
  32. data collection:        (   80) seconds.
  33. Offline data collection
  34. capabilities:            (0x7b) SMART execute Offline immediate.
  35.                     Auto Offline data collection on/off support.
  36.                     Suspend Offline collection upon new
  37.                     command.
  38.                     Offline surface scan supported.
  39.                     Self-test supported.
  40.                     Conveyance Self-test supported.
  41.                     Selective Self-test supported.
  42. SMART capabilities:            (0x0003) Saves SMART data before entering
  43.                     power-saving mode.
  44.                     Supports SMART auto save timer.
  45. Error logging capability:        (0x01) Error logging supported.
  46.                     General Purpose Logging supported.
  47. Short self-test routine
  48. recommended polling time:    (   1) minutes.
  49. Extended self-test routine
  50. recommended polling time:    ( 106) minutes.
  51. Conveyance self-test routine
  52. recommended polling time:    (   2) minutes.
  53. SCT capabilities:          (0x1085) SCT Status supported.
  54.  
  55. SMART Attributes Data Structure revision number: 10
  56. Vendor Specific SMART Attributes with Thresholds:
  57. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  58.   1 Raw_Read_Error_Rate     0x000f   086   086   006    Pre-fail  Always       -       89490400
  59.   3 Spin_Up_Time            0x0003   097   097   000    Pre-fail  Always       -       0
  60.   4 Start_Stop_Count        0x0032   097   097   020    Old_age   Always       -       3159
  61.   5 Reallocated_Sector_Ct   0x0033   096   096   010    Pre-fail  Always       -       5488
  62.   7 Seek_Error_Rate         0x000f   078   060   030    Pre-fail  Always       -       60173147
  63.   9 Power_On_Hours          0x0032   088   088   000    Old_age   Always       -       10753
  64.  10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
  65.  12 Power_Cycle_Count       0x0032   099   099   020    Old_age   Always       -       1270
  66. 183 Runtime_Bad_Block       0x0032   099   099   000    Old_age   Always       -       1
  67. 184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
  68. 187 Reported_Uncorrect      0x0032   091   091   000    Old_age   Always       -       9
  69. 188 Command_Timeout         0x0032   100   074   000    Old_age   Always       -       6 7 84
  70. 189 High_Fly_Writes         0x003a   084   084   000    Old_age   Always       -       16
  71. 190 Airflow_Temperature_Cel 0x0022   066   053   045    Old_age   Always       -       34 (Min/Max 34/34)
  72. 191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       0
  73. 192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       43
  74. 193 Load_Cycle_Count        0x0032   084   084   000    Old_age   Always       -       33381
  75. 194 Temperature_Celsius     0x0022   034   047   000    Old_age   Always       -       34 (0 13 0 0 0)
  76. 197 Current_Pending_Sector  0x0012   027   027   000    Old_age   Always       -       12064
  77. 198 Offline_Uncorrectable   0x0010   027   027   000    Old_age   Offline      -       12064
  78. 199 UDMA_CRC_Error_Count    0x003e   200   001   000    Old_age   Always       -       5894
  79. 240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       6885h+39m+31.747s
  80. 241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       25079588578
  81. 242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       211212938318
  82.  
  83. SMART Error Log Version: 1
  84. ATA Error Count: 9 (device log contains only the most recent five errors)
  85.     CR = Command Register [HEX]
  86.     FR = Features Register [HEX]
  87.     SC = Sector Count Register [HEX]
  88.     SN = Sector Number Register [HEX]
  89.     CL = Cylinder Low Register [HEX]
  90.     CH = Cylinder High Register [HEX]
  91.     DH = Device/Head Register [HEX]
  92.     DC = Device Command Register [HEX]
  93.     ER = Error register [HEX]
  94.     ST = Status register [HEX]
  95. Powered_Up_Time is measured from power on, and printed as
  96. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  97. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  98.  
  99. Error 9 occurred at disk power-on lifetime: 10737 hours (447 days + 9 hours)
  100.   When the command that caused the error occurred, the device was active or idle.
  101.  
  102.   After command completion occurred, registers were:
  103.   ER ST SC SN CL CH DH
  104.   -- -- -- -- -- -- --
  105.   40 51 00 90 99 0c 00  Error: UNC at LBA = 0x000c9990 = 825744
  106.  
  107.   Commands leading to the command that caused the error were:
  108.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  109.   -- -- -- -- -- -- -- --  ----------------  --------------------
  110.   25 00 80 f0 5a 0c 40 00      00:00:21.181  READ DMA EXT
  111.   25 00 80 70 5a 0c 40 00      00:00:21.167  READ DMA EXT
  112.   ea 00 00 00 00 00 00 00      00:00:21.166  FLUSH CACHE EXT
  113.   ea 00 00 00 00 00 00 00      00:00:21.165  FLUSH CACHE EXT
  114.   ea 00 00 00 00 00 00 00      00:00:21.164  FLUSH CACHE EXT
  115.  
  116. Error 8 occurred at disk power-on lifetime: 10737 hours (447 days + 9 hours)
  117.   When the command that caused the error occurred, the device was active or idle.
  118.  
  119.   After command completion occurred, registers were:
  120.   ER ST SC SN CL CH DH
  121.   -- -- -- -- -- -- --
  122.   40 51 00 90 99 0c 00  Error: UNC at LBA = 0x000c9990 = 825744
  123.  
  124.   Commands leading to the command that caused the error were:
  125.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  126.   -- -- -- -- -- -- -- --  ----------------  --------------------
  127.   25 00 80 70 62 0c 40 00      00:00:17.385  READ DMA EXT
  128.   25 00 80 f0 5a 0c 40 00      00:00:17.372  READ DMA EXT
  129.   ea 00 00 00 00 00 00 00      00:00:17.371  FLUSH CACHE EXT
  130.   ea 00 00 00 00 00 00 00      00:00:17.370  FLUSH CACHE EXT
  131.   ea 00 00 00 00 00 00 00      00:00:17.370  FLUSH CACHE EXT
  132.  
  133. Error 7 occurred at disk power-on lifetime: 10737 hours (447 days + 9 hours)
  134.   When the command that caused the error occurred, the device was active or idle.
  135.  
  136.   After command completion occurred, registers were:
  137.   ER ST SC SN CL CH DH
  138.   -- -- -- -- -- -- --
  139.   40 51 00 a0 d6 08 00  Error: UNC at LBA = 0x0008d6a0 = 579232
  140.  
  141.   Commands leading to the command that caused the error were:
  142.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  143.   -- -- -- -- -- -- -- --  ----------------  --------------------
  144.   25 00 80 f0 d5 08 40 00      00:00:17.102  READ DMA EXT
  145.   25 00 80 70 d5 08 40 00      00:00:17.087  READ DMA EXT
  146.   25 00 40 60 12 00 40 00      00:00:17.086  READ DMA EXT
  147.   25 00 40 20 12 00 40 00      00:00:17.085  READ DMA EXT
  148.   ea 00 00 00 00 00 00 00      00:00:17.085  FLUSH CACHE EXT
  149.  
  150. Error 6 occurred at disk power-on lifetime: 10737 hours (447 days + 9 hours)
  151.   When the command that caused the error occurred, the device was active or idle.
  152.  
  153.   After command completion occurred, registers were:
  154.   ER ST SC SN CL CH DH
  155.   -- -- -- -- -- -- --
  156.   40 51 00 a0 d6 08 00  Error: UNC at LBA = 0x0008d6a0 = 579232
  157.  
  158.   Commands leading to the command that caused the error were:
  159.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  160.   -- -- -- -- -- -- -- --  ----------------  --------------------
  161.   25 00 80 f0 d5 08 40 00      00:00:22.184  READ DMA EXT
  162.   25 00 80 70 d5 08 40 00      00:00:22.177  READ DMA EXT
  163.   25 00 40 60 12 00 40 00      00:00:22.176  READ DMA EXT
  164.   25 00 40 20 12 00 40 00      00:00:22.176  READ DMA EXT
  165.   ea 00 00 00 00 00 00 00      00:00:22.175  FLUSH CACHE EXT
  166.  
  167. Error 5 occurred at disk power-on lifetime: 10737 hours (447 days + 9 hours)
  168.   When the command that caused the error occurred, the device was active or idle.
  169.  
  170.   After command completion occurred, registers were:
  171.   ER ST SC SN CL CH DH
  172.   -- -- -- -- -- -- --
  173.   40 53 00 a0 d6 08 00  Error: UNC at LBA = 0x0008d6a0 = 579232
  174.  
  175.   Commands leading to the command that caused the error were:
  176.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  177.   -- -- -- -- -- -- -- --  ----------------  --------------------
  178.   25 00 80 f0 d5 08 40 00      00:05:01.700  READ DMA EXT
  179.   25 00 80 70 d5 08 40 00      00:05:01.682  READ DMA EXT
  180.   ea 00 00 00 00 00 00 00      00:05:01.681  FLUSH CACHE EXT
  181.   ea 00 00 00 00 00 00 00      00:05:01.680  FLUSH CACHE EXT
  182.   ea 00 00 00 00 00 00 00      00:05:01.679  FLUSH CACHE EXT
  183.  
  184. SMART Self-test log structure revision number 1
  185. No self-tests have been logged.  [To run self-tests, use: smartctl -t]
  186.  
  187. SMART Selective self-test log data structure revision number 1
  188.  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  189.     1        0        0  Not_testing
  190.     2        0        0  Not_testing
  191.     3        0        0  Not_testing
  192.     4        0        0  Not_testing
  193.     5        0        0  Not_testing
  194. Selective self-test flags (0x0):
  195.   After scanning selected spans, do NOT read-scan remainder of disk.
  196. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!