API tools faq
paste
Advertisement
Guest User

Smart-Before-Badblocks

a guest
Jun 11th, 2018
412
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 8.75 KB | None | 0 0
raw download clone embed print report
  1. smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-127-generic] (local build)
  2. Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family: Seagate Laptop SSHD
  6. Device Model: ST500LM000-1EJ162
  7. Serial Number: W760JJRK
  8. LU WWN Device Id: 5 000c50 078287428
  9. Firmware Version: FJ14
  10. User Capacity: 500.107.862.016 bytes [500 GB]
  11. Sector Sizes: 512 bytes logical, 4096 bytes physical
  12. Rotation Rate: 5400 rpm
  13. Form Factor: 2.5 inches
  14. Device is: In smartctl database [for details use: -P show]
  15. ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
  16. SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
  17. Local Time is: Sun Jun 10 17:39:42 2018 CEST
  18. SMART support is: Available - device has SMART capability.
  19. SMART support is: Enabled
  20.  
  21. === START OF READ SMART DATA SECTION ===
  22. SMART overall-health self-assessment test result: PASSED
  23. See vendor-specific Attribute list for marginal Attributes.
  24.  
  25. General SMART Values:
  26. Offline data collection status: (0x82) Offline data collection activity
  27. was completed without error.
  28. Auto Offline Data Collection: Enabled.
  29. Self-test execution status: ( 0) The previous self-test routine completed
  30. without error or no self-test has ever
  31. been run.
  32. Total time to complete Offline
  33. data collection: ( 139) seconds.
  34. Offline data collection
  35. capabilities: (0x7b) SMART execute Offline immediate.
  36. Auto Offline data collection on/off support.
  37. Suspend Offline collection upon new
  38. command.
  39. Offline surface scan supported.
  40. Self-test supported.
  41. Conveyance Self-test supported.
  42. Selective Self-test supported.
  43. SMART capabilities: (0x0003) Saves SMART data before entering
  44. power-saving mode.
  45. Supports SMART auto save timer.
  46. Error logging capability: (0x01) Error logging supported.
  47. General Purpose Logging supported.
  48. Short self-test routine
  49. recommended polling time: ( 1) minutes.
  50. Extended self-test routine
  51. recommended polling time: ( 100) minutes.
  52. Conveyance self-test routine
  53. recommended polling time: ( 2) minutes.
  54. SCT capabilities: (0x1081) SCT Status supported.
  55.  
  56. SMART Attributes Data Structure revision number: 10
  57. Vendor Specific SMART Attributes with Thresholds:
  58. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  59. 1 Raw_Read_Error_Rate 0x000f 104 099 006 Pre-fail Always - 6995776
  60. 3 Spin_Up_Time 0x0003 098 098 000 Pre-fail Always - 0
  61. 4 Start_Stop_Count 0x0032 098 098 020 Old_age Always - 2766
  62. 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
  63. 7 Seek_Error_Rate 0x000f 059 055 030 Pre-fail Always - 107395771838
  64. 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 609
  65. 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
  66. 12 Power_Cycle_Count 0x0032 098 098 020 Old_age Always - 2756
  67. 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
  68. 187 Reported_Uncorrect 0x0032 099 099 000 Old_age Always - 1
  69. 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
  70. 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
  71. 190 Airflow_Temperature_Cel 0x0022 068 037 045 Old_age Always In_the_past 32 (0 120 32 26 0)
  72. 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
  73. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 17
  74. 193 Load_Cycle_Count 0x0032 097 097 000 Old_age Always - 7616
  75. 194 Temperature_Celsius 0x0022 032 063 000 Old_age Always - 32 (255 250 0 0 0)
  76. 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
  77. 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
  78. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  79. 254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 0
  80.  
  81. SMART Error Log Version: 1
  82. ATA Error Count: 4
  83. CR = Command Register [HEX]
  84. FR = Features Register [HEX]
  85. SC = Sector Count Register [HEX]
  86. SN = Sector Number Register [HEX]
  87. CL = Cylinder Low Register [HEX]
  88. CH = Cylinder High Register [HEX]
  89. DH = Device/Head Register [HEX]
  90. DC = Device Command Register [HEX]
  91. ER = Error register [HEX]
  92. ST = Status register [HEX]
  93. Powered_Up_Time is measured from power on, and printed as
  94. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  95. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  96.  
  97. Error 4 occurred at disk power-on lifetime: 521 hours (21 days + 17 hours)
  98. When the command that caused the error occurred, the device was active or idle.
  99.  
  100. After command completion occurred, registers were:
  101. ER ST SC SN CL CH DH
  102. -- -- -- -- -- -- --
  103. 04 71 03 80 04 11 40
  104.  
  105. Commands leading to the command that caused the error were:
  106. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  107. -- -- -- -- -- -- -- -- ---------------- --------------------
  108. ea 00 00 00 00 00 00 00 00:13:30.508 FLUSH CACHE EXT
  109. 61 00 08 00 09 9c 40 00 00:13:30.507 WRITE FPDMA QUEUED
  110. 61 00 08 78 e1 42 40 00 00:13:30.507 WRITE FPDMA QUEUED
  111. 61 00 28 f0 44 9d 40 00 00:13:30.507 WRITE FPDMA QUEUED
  112. 61 00 08 00 6f 71 47 00 00:13:29.805 WRITE FPDMA QUEUED
  113.  
  114. Error 3 occurred at disk power-on lifetime: 519 hours (21 days + 15 hours)
  115. When the command that caused the error occurred, the device was active or idle.
  116.  
  117. After command completion occurred, registers were:
  118. ER ST SC SN CL CH DH
  119. -- -- -- -- -- -- --
  120. 04 51 00 a0 25 e7 06
  121.  
  122. Commands leading to the command that caused the error were:
  123. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  124. -- -- -- -- -- -- -- -- ---------------- --------------------
  125. ea 00 00 00 00 00 00 00 00:11:47.000 FLUSH CACHE EXT
  126. 61 00 08 88 c4 a0 40 00 00:11:45.863 WRITE FPDMA QUEUED
  127. 60 00 08 40 d4 08 49 00 00:11:45.863 READ FPDMA QUEUED
  128. 61 00 08 00 09 9c 40 00 00:11:45.863 WRITE FPDMA QUEUED
  129. 60 00 12 19 47 5a 40 00 00:11:45.863 READ FPDMA QUEUED
  130.  
  131. Error 2 occurred at disk power-on lifetime: 519 hours (21 days + 15 hours)
  132. When the command that caused the error occurred, the device was active or idle.
  133.  
  134. After command completion occurred, registers were:
  135. ER ST SC SN CL CH DH
  136. -- -- -- -- -- -- --
  137. 40 51 00 40 d4 08 09 Error: WP at LBA = 0x0908d440 = 151573568
  138.  
  139. Commands leading to the command that caused the error were:
  140. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  141. -- -- -- -- -- -- -- -- ---------------- --------------------
  142. 61 00 08 78 e1 42 40 00 00:10:28.019 WRITE FPDMA QUEUED
  143. 61 00 08 e0 96 a0 40 00 00:10:27.914 WRITE FPDMA QUEUED
  144. 61 00 08 98 95 a0 40 00 00:10:27.914 WRITE FPDMA QUEUED
  145. 61 00 08 70 95 a0 40 00 00:10:27.914 WRITE FPDMA QUEUED
  146. 61 00 08 58 95 a0 40 00 00:10:27.914 WRITE FPDMA QUEUED
  147.  
  148. Error 1 occurred at disk power-on lifetime: 426 hours (17 days + 18 hours)
  149. When the command that caused the error occurred, the device was active or idle.
  150.  
  151. After command completion occurred, registers were:
  152. ER ST SC SN CL CH DH
  153. -- -- -- -- -- -- --
  154. 04 71 03 80 04 11 40
  155.  
  156. Commands leading to the command that caused the error were:
  157. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  158. -- -- -- -- -- -- -- -- ---------------- --------------------
  159. ea 00 00 00 00 00 00 00 00:35:26.857 FLUSH CACHE EXT
  160. 61 00 08 00 09 9c 40 00 00:35:26.856 WRITE FPDMA QUEUED
  161. 61 00 08 ff ff ff 4f 00 00:35:26.161 WRITE FPDMA QUEUED
  162. 61 00 08 ff ff ff 4f 00 00:35:26.161 WRITE FPDMA QUEUED
  163. 61 00 08 ff ff ff 4f 00 00:35:26.160 WRITE FPDMA QUEUED
  164.  
  165. SMART Self-test log structure revision number 1
  166. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  167. # 1 Short offline Completed without error 00% 601 -
  168.  
  169. SMART Selective self-test log data structure revision number 1
  170. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  171. 1 0 0 Not_testing
  172. 2 0 0 Not_testing
  173. 3 0 0 Not_testing
  174. 4 0 0 Not_testing
  175. 5 0 0 Not_testing
  176. Selective self-test flags (0x0):
  177. After scanning selected spans, do NOT read-scan remainder of disk.
  178. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!