Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- === START OF INFORMATION SECTION ===
- Model Family: Hitachi Deskstar 7K3000
- Device Model: Hitachi HDS723020BLA642
- Serial Number: MN1270FA0WVE3D
- LU WWN Device Id: 5 000cca 36acca935
- Firmware Version: MN6OAA10
- User Capacity: 2 000 398 934 016 bytes [2,00 TB]
- Sector Size: 512 bytes logical/physical
- Rotation Rate: 7200 rpm
- Form Factor: 3.5 inches
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ATA8-ACS T13/1699-D revision 4
- SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Mon Apr 17 13:50:52 2017 MSK
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x82) Offline data collection activity
- was completed without error.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 28) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 1) minutes.
- Extended self-test routine
- recommended polling time: ( 326) minutes.
- SCT capabilities: (0x003d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
- 2 Throughput_Performance 0x0005 136 136 054 Pre-fail Offline - 80
- 3 Spin_Up_Time 0x0007 153 153 024 Pre-fail Always - 358 (Average 389)
- 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 311
- 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
- 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
- 8 Seek_Time_Performance 0x0005 135 135 020 Pre-fail Offline - 26
- 9 Power_On_Hours 0x0012 095 095 000 Old_age Always - 40328
- 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 310
- 192 Power-Off_Retract_Count 0x0032 099 099 000 Old_age Always - 1867
- 193 Load_Cycle_Count 0x0012 099 099 000 Old_age Always - 1867
- 194 Temperature_Celsius 0x0002 171 171 000 Old_age Always - 35 (Min/Max 20/54)
- 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
- 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
- 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 4
- SMART Error Log Version: 1
- ATA Error Count: 4
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 4 occurred at disk power-on lifetime: 23883 hours (995 days + 3 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 84 51 08 78 2c c4 06 Error: ICRC, ABRT at LBA = 0x06c42c78 = 113519736
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 61 80 00 00 29 c4 40 08 01:12:01.148 WRITE FPDMA QUEUED
- 61 00 00 00 25 c4 40 08 01:12:01.145 WRITE FPDMA QUEUED
- 61 00 00 00 21 c4 40 08 01:12:01.141 WRITE FPDMA QUEUED
- 61 00 00 00 1d c4 40 08 01:12:01.138 WRITE FPDMA QUEUED
- 61 80 00 80 19 c4 40 08 01:12:01.135 WRITE FPDMA QUEUED
- Error 3 occurred at disk power-on lifetime: 23883 hours (995 days + 3 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 84 51 ea 96 17 e1 05 Error: ICRC, ABRT at LBA = 0x05e11796 = 98637718
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 61 80 00 00 16 e1 40 08 01:02:58.055 WRITE FPDMA QUEUED
- 61 00 00 00 12 e1 40 08 01:02:58.052 WRITE FPDMA QUEUED
- 61 00 00 00 0e e1 40 08 01:02:58.048 WRITE FPDMA QUEUED
- 61 00 00 00 0a e1 40 08 01:02:58.045 WRITE FPDMA QUEUED
- 61 80 00 80 06 e1 40 08 01:02:58.041 WRITE FPDMA QUEUED
- Error 2 occurred at disk power-on lifetime: 23882 hours (995 days + 2 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 84 51 b0 50 fa 19 04 Error: ICRC, ABRT at LBA = 0x0419fa50 = 68811344
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 61 00 00 00 f8 19 40 08 00:47:54.783 WRITE FPDMA QUEUED
- 61 80 00 80 f4 19 40 08 00:47:54.779 WRITE FPDMA QUEUED
- 61 00 00 80 f0 19 40 08 00:47:54.776 WRITE FPDMA QUEUED
- 61 00 00 80 ec 19 40 08 00:47:54.773 WRITE FPDMA QUEUED
- 61 00 00 80 e8 19 40 08 00:47:54.769 WRITE FPDMA QUEUED
- Error 1 occurred at disk power-on lifetime: 23882 hours (995 days + 2 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 84 51 b3 cd b0 6f 01 Error: ICRC, ABRT at LBA = 0x016fb0cd = 24096973
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 61 00 18 00 bd 6f 40 08 00:41:54.584 WRITE FPDMA QUEUED
- 61 80 00 80 b9 6f 40 08 00:41:54.583 WRITE FPDMA QUEUED
- 61 00 20 80 b5 6f 40 08 00:41:54.582 WRITE FPDMA QUEUED
- 61 00 10 80 b2 6f 40 08 00:41:54.579 WRITE FPDMA QUEUED
- 61 00 08 80 ae 6f 40 08 00:41:54.577 WRITE FPDMA QUEUED
- SMART Self-test log structure revision number 1
- No self-tests have been logged. [To run self-tests, use: smartctl -t]
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement