Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Removed memory: created DMA memory pool at 0x000000008d600000, size 17 MiB
- [ 0.000000] Reserved memory: initialized node adsp_fw_region@0, compatible id removed-dma-pool
- [ 0.000000] Removed memory: created DMA memory pool at 0x000000008e700000, size 7 MiB
- [ 0.000000] Reserved memory: initialized node wcnss_fw_region@0, compatible id removed-dma-pool
- [ 0.000000] Reserved memory: allocated memory for 'venus_region@0' node: base 0x000000008f800000, size 8 MiB
- [ 0.000000] Reserved memory: created CMA memory pool at 0x000000008f800000, size 8 MiB
- [ 0.000000] Reserved memory: initialized node venus_region@0, compatible id shared-dma-pool
- [ 0.000000] Reserved memory: allocated memory for 'secure_region@0' node: base 0x00000000f6800000, size 152 MiB
- [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f6800000, size 152 MiB
- [ 0.000000] Reserved memory: initialized node secure_region@0, compatible id shared-dma-pool
- [ 0.000000] Reserved memory: allocated memory for 'qseecom_region@0' node: base 0x00000000f5800000, size 16 MiB
- [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f5800000, size 16 MiB
- [ 0.000000] Reserved memory: initialized node qseecom_region@0, compatible id shared-dma-pool
- [ 0.000000] Reserved memory: allocated memory for 'adsp_region@0' node: base 0x00000000f5400000, size 4 MiB
- [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f5400000, size 4 MiB
- [ 0.000000] Reserved memory: initialized node adsp_region@0, compatible id shared-dma-pool
- [ 0.000000] Reserved memory: allocated memory for 'gpu_region@0' node: base 0x000000008f000000, size 8 MiB
- [ 0.000000] Reserved memory: created CMA memory pool at 0x000000008f000000, size 8 MiB
- [ 0.000000] Reserved memory: initialized node gpu_region@0, compatible id shared-dma-pool
- [ 0.000000] cma: Reserved 16 MiB at 0x00000000f4400000
- [ 0.000000] On node 0 totalpages: 772608
- [ 0.000000] DMA zone: 12288 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 772608 pages, LIFO batch:31
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: PSCIv1.0 detected in firmware.
- [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- [ 0.000000] psci: Initializing psci_cpu_init
- [ 0.000000] psci: Initializing psci_cpu_init
- [ 0.000000] psci: Initializing psci_cpu_init
- [ 0.000000] psci: Initializing psci_cpu_init
- [ 0.000000] psci: Initializing psci_cpu_init
- [ 0.000000] psci: Initializing psci_cpu_init
- [ 0.000000] psci: Initializing psci_cpu_init
- [ 0.000000] reserved RAM buffer: mem_address:0x100000 mem_size:0xf4060000
- [ 0.000000] PERCPU: Embedded 15 pages/cpu @ffffffc0b4191000 s22848 r8192 d30400 u61440
- [ 0.000000] pcpu-alloc: s22848 r8192 d30400 u61440 alloc=15*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
- [ 0.000000] Detected VIPT I-cache on CPU0
- [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 760320
- [ 0.000000] Kernel command line: sched_enable_hmp=1 sched_enable_power_aware=1 androidboot.hardware=qcom msm_rtb.filter=0x237 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 androidboot.bootdevice=7824900.sdhci earlycon=msm_hsl_uart,0x78af000 androidboot.selinux=permissive androidboot.emmc=true androidboot.verifiedbootstate=orange androidboot.veritymode=enforcing androidboot.keymaster=1 androidboot.serialno=d01687f7d150 androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_ft8613_ebbg_5p7_720p_video:1:none:cfg:single_dsi board_id=S88567BC1:board_vol=476574
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
- [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.000000] Memory: 2660568K/3090432K available (15728K kernel code, 2877K rwdata, 8620K rodata, 532K init, 3858K bss, 220968K reserved, 208896K cma-reserved)
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB)
- [ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
- [ 0.000000] 0xffffffbdc0000000 - 0xffffffbdc3000000 ( 48 MB actual)
- [ 0.000000] PCI I/O : 0xffffffbffa000000 - 0xffffffbffb000000 ( 16 MB)
- [ 0.000000] fixed : 0xffffffbffbdfb000 - 0xffffffbffbdff000 ( 16 KB)
- [ 0.000000] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
- [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0c0000000 ( 3072 MB)
- [ 0.000000] .init : 0xffffffc001854000 - 0xffffffc0018d9000 ( 532 KB)
- [ 0.000000] .text : 0xffffffc000080000 - 0xffffffc000fde210 ( 15737 KB)
- [ 0.000000] .data : 0xffffffc0018ff000 - 0xffffffc001bce600 ( 2878 KB)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
- [ 0.000000] HMP scheduling enabled.
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
- [ 0.000000] **********************************************************
- [ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
- [ 0.000000] ** **
- [ 0.000000] ** trace_printk() being used. Allocating extra memory. **
- [ 0.000000] ** **
- [ 0.000000] ** This means that this is a DEBUG kernel and it is **
- [ 0.000000] ** unsafe for produciton use. **
- [ 0.000000] ** **
- [ 0.000000] ** If you see this message and you are not debugging **
- [ 0.000000] ** the kernel, report this immediately to your vendor! **
- [ 0.000000] ** **
- [ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
- [ 0.000000] **********************************************************
- [ 0.000000] NR_IRQS:64 nr_irqs:64 0
- [ 0.000000] mpm_init_irq_domain(): Cannot find irq controller for qcom,gpio-parent
- [ 0.000000] MPM 1 irq mapping errored -517
- [ 0.000000] Offload RCU callbacks from all CPUs
- [ 0.000000] Offload RCU callbacks from CPUs: 0-7.
- [ 0.000000] Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
- [ 0.000006] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
- [ 0.000024] Switched to clocksource arch_sys_counter
- [ 0.003617] allocated 12582912 bytes of page_cgroup
- [ 0.003627] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.003642] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
- [ 0.003655] pid_max: default: 32768 minimum: 301
- [ 0.003774] Security Framework initialized
- [ 0.003808] SELinux: Initializing.
- [ 0.003858] SELinux: Starting in permissive mode
- [ 0.003911] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.003924] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.004775] Initializing cgroup subsys memory
- [ 0.004800] Initializing cgroup subsys freezer
- [ 0.005492] /cpus/cpu@0: Missing clock-frequency property
- [ 0.005509] /cpus/cpu@1: Missing clock-frequency property
- [ 0.005527] /cpus/cpu@2: Missing clock-frequency property
- [ 0.005545] /cpus/cpu@3: Missing clock-frequency property
- [ 0.005566] /cpus/cpu@100: Missing clock-frequency property
- [ 0.005588] /cpus/cpu@101: Missing clock-frequency property
- [ 0.005612] /cpus/cpu@102: Missing clock-frequency property
- [ 0.005638] /cpus/cpu@103: Missing clock-frequency property
- [ 0.005696] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available
- [ 0.005743] EFI services will not be available.
- [ 0.005763] ASID allocator initialised with 32768 entries
- [ 0.027348] Core Debug Lock unlocked
- [ 0.028280] MSM Memory Dump base table set up
- [ 0.028305] MSM Memory Dump apps data table set up
- [ 0.028346] Configuring XPU violations to be fatal errors
- [ 0.029764] cpu_clock_pwr_init: Power clocks configured
- [ 0.035097] Detected VIPT I-cache on CPU1
- [ 0.035159] CPU1: Booted secondary processor [410fd034]
- [ 0.040149] Detected VIPT I-cache on CPU2
- [ 0.040190] CPU2: Booted secondary processor [410fd034]
- [ 0.045167] Detected VIPT I-cache on CPU3
- [ 0.045203] CPU3: Booted secondary processor [410fd034]
- [ 0.050247] Detected VIPT I-cache on CPU4
- [ 0.050305] CPU4: Booted secondary processor [410fd034]
- [ 0.055306] Detected VIPT I-cache on CPU5
- [ 0.055345] CPU5: Booted secondary processor [410fd034]
- [ 0.060392] Detected VIPT I-cache on CPU6
- [ 0.060431] CPU6: Booted secondary processor [410fd034]
- [ 0.065407] Detected VIPT I-cache on CPU7
- [ 0.065446] CPU7: Booted secondary processor [410fd034]
- [ 0.065633] Brought up 8 CPUs
- [ 0.065688] SMP: Total of 8 processors activated.
- [ 0.065782] alternatives: patching kernel code
- [ 0.069109] DMI not present or invalid.
- [ 0.078281] pinctrl core: initialized pinctrl subsystem
- [ 0.078885] regulator-dummy: no parameters
- [ 0.166644] NET: Registered protocol family 16
- [ 0.168752] ramoops: using module parameters
- [ 0.171269] console [pstore0] enabled
- [ 0.171426] pstore: Registered ramoops as persistent store backend
- [ 0.171439] ramoops: attached 0x100000@0xf4060000, ecc: 0/0
- [ 0.172410] msm_pm_tz_boot_init: set warmboot address failed
- [ 0.172438] scm_call failed: func id 0x42000101, ret: -1, syscall returns: 0x0, 0x0, 0x0
- [ 0.190121] cpuidle: using governor ladder
- [ 0.210115] cpuidle: using governor menu
- [ 0.230114] cpuidle: using governor qcom
- [ 0.231211] vdso: 2 pages (1 code @ ffffffc000fe4000, 1 data @ ffffffc001904000)
- [ 0.232092] software IO TLB: mapped [mem 0xee000000-0xee400000] (4MB)
- [ 0.233199] DMA: preallocated 256 KiB pool for atomic allocations
- [ 0.241129] __of_mpm_init(): MPM driver mapping exists
- [ 0.243923] platform soc:qcom,kgsl-hyp: assigned reserved memory node gpu_region@0
- [ 0.269893] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
- [ 0.275074] sps:sps is ready.
- [ 0.277428] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe
- [ 0.277447] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
- [ 0.277466] msm-thermal soc:qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
- [ 0.277480] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
- [ 0.283653] cpu-clock-8953 b114000.qcom,cpu-clock-8953: Speed bin: 6 PVS Version: 0
- [ 0.283765] cpu-clock-8953 b114000.qcom,cpu-clock-8953: Get vdd-mx regulator!!!
- [ 0.285022] msm_rpm_glink_dt_parse: qcom,rpm-glink compatible not matches
- [ 0.285036] msm_rpm_dev_probe: APSS-RPM communication over SMD
- [ 0.287793] smd_channel_probe_now: allocation table not initialized
- [ 0.289271] smd_channel_probe_now: allocation table not initialized
- [ 0.290447] smd_channel_probe_now: allocation table not initialized
- [ 0.292252] msm_watchdog b017000.qcom,wdt: wdog absent resource not present
- [ 0.292668] msm_watchdog b017000.qcom,wdt: MSM Watchdog Initialized
- [ 0.294025] msm-sn-fuse a0128.snfuse: SN interface initialized
- [ 0.294270] msm-secboot-fuse a41d0.secbootfuse: Secboot-fuse interface initialized
- [ 0.301026] platform soc:qcom,adsprpc-mem: assigned reserved memory node adsp_region@0
- [ 0.304386] spmi_pmic_arb 200f000.qcom,spmi: PMIC Arb Version-2 0x20010000
- [ 0.308151] pm8953_s5: 400 <--> 1140 mV at 870 mV normal idle
- [ 0.308513] pm8953_s5_avs_limit: 400 <--> 1140 mV
- [ 0.308726] spm_regulator_probe: name=pm8953_s5, range=LV, voltage=870000 uV, mode=AUTO, step rate=1200 uV/us
- [ 0.316078] platform 4080000.qcom,mss: assigned reserved memory node modem_region@0
- [ 0.316686] platform c200000.qcom,lpass: assigned reserved memory node adsp_fw_region@0
- [ 0.317023] platform 1de0000.qcom,venus: assigned reserved memory node venus_region@0
- [ 0.317758] platform a21b000.qcom,pronto: assigned reserved memory node wcnss_fw_region@0
- [ 0.320345] apc_mem_acc_corner: 0 <--> 0 mV
- [ 0.321685] cpr4_msm8953_apss_read_fuse_data: apc_corner: speed bin = 6
- [ 0.321701] cpr4_msm8953_apss_read_fuse_data: apc_corner: CPR fusing revision = 3
- [ 0.321714] cpr4_msm8953_apss_read_fuse_data: apc_corner: foundry id = 1
- [ 0.321726] cpr4_msm8953_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0
- [ 0.321765] cpr4_msm8953_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable
- [ 0.321913] cpr4_msm8953_apss_calculate_open_loop_voltages: apc_corner: fused LowSVS: open-loop= 625000 uV
- [ 0.321925] cpr4_msm8953_apss_calculate_open_loop_voltages: apc_corner: fused SVS: open-loop= 680000 uV
- [ 0.321936] cpr4_msm8953_apss_calculate_open_loop_voltages: apc_corner: fused NOM: open-loop= 755000 uV
- [ 0.321948] cpr4_msm8953_apss_calculate_open_loop_voltages: apc_corner: fused TURBO_L1: open-loop= 915000 uV
- [ 0.322027] cpr4_msm8953_apss_calculate_target_quotients: apc_corner: fused LowSVS: quot[ 7]= 575
- [ 0.322040] cpr4_msm8953_apss_calculate_target_quotients: apc_corner: fused SVS: quot[ 7]= 668, quot_offset[ 7]= 90
- [ 0.322053] cpr4_msm8953_apss_calculate_target_quotients: apc_corner: fused NOM: quot[ 7]= 827, quot_offset[ 7]= 155
- [ 0.322066] cpr4_msm8953_apss_calculate_target_quotients: apc_corner: fused TURBO_L1: quot[ 7]=1157, quot_offset[ 7]= 325
- [ 0.322418] cpr4_apss_init_aging: apc: sensor 6 aging init quotient diff = 15, aging RO scale = 2800 QUOT/V
- [ 0.322616] cpr3_regulator_init_ctrl: apc: Default CPR mode = HW closed-loop
- [ 0.322789] apc_corner: 0 <--> 0 mV at 0 mV
- [ 0.324209] gfx_mem_acc_corner: 0 <--> 0 mV
- [ 0.324784] GFX_LDO: msm_gfx_ldo_parse_dt: Unable to parse CX parameters rc=-517
- [ 0.324796] GFX_LDO: msm_gfx_ldo_probe: Unable to pasrse dt rc=-517
- [ 0.343164] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
- [ 0.344166] msm_thermal:sensor_mgr_init_threshold threshold id already initialized
- [ 0.344326] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe
- [ 0.344338] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
- [ 0.344358] msm-thermal soc:qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
- [ 0.344371] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
- [ 0.344696] cpu-clock-8953 b114000.qcom,cpu-clock-8953: Speed bin: 6 PVS Version: 0
- [ 0.344802] cpu-clock-8953 b114000.qcom,cpu-clock-8953: Get vdd-mx regulator!!!
- [ 0.344894] msm_rpm_glink_dt_parse: qcom,rpm-glink compatible not matches
- [ 0.344907] msm_rpm_dev_probe: APSS-RPM communication over SMD
- [ 0.345766] pm8953_s1: 870 <--> 1156 mV at 1000 mV normal idle
- [ 0.346698] pm8953_s2_level: 0 <--> 0 mV at 0 mV normal idle
- [ 0.347324] pm8953_s2_floor_level: 0 <--> 0 mV at 0 mV normal idle
- [ 0.347913] pm8953_s2_level_ao: 0 <--> 0 mV at 0 mV normal idle
- [ 0.348751] pm8953_s3: 1225 mV normal idle
- [ 0.349563] pm8953_s4: 1900 <--> 2050 mV at 1900 mV normal idle
- [ 0.350463] pm8953_s7_level: 0 <--> 0 mV at 0 mV normal idle
- [ 0.351074] pm8953_s7_level_ao: 0 <--> 0 mV at 0 mV normal idle
- [ 0.351692] pm8953_s7_level_so: 0 <--> 0 mV at 0 mV normal idle
- [ 0.352504] pm8953_l1: 1000 <--> 1100 mV at 1000 mV normal idle
- [ 0.353346] pm8953_l2: 975 <--> 1225 mV at 975 mV normal idle
- [ 0.354169] pm8953_l3: 925 mV normal idle
- [ 0.355016] pm8953_l5: 1800 mV normal idle
- [ 0.355836] pm8953_l6: 1800 mV normal idle
- [ 0.356682] pm8953_l7: 1800 <--> 1900 mV at 1800 mV normal idle
- [ 0.357270] pm8953_l7_ao: 1800 <--> 1900 mV at 1800 mV normal idle
- [ 0.358120] pm8953_l8: 2900 mV normal idle
- [ 0.358934] pm8953_l9: 3000 <--> 3300 mV at 3000 mV normal idle
- [ 0.359780] pm8953_l10: 2850 mV normal idle
- [ 0.360636] pm8953_l11: 2950 mV normal idle
- [ 0.361489] pm8953_l12: 1800 <--> 2950 mV at 1800 mV normal idle
- [ 0.362297] pm8953_l13: 3125 mV normal idle
- [ 0.363129] pm8953_l16: 1800 mV normal idle
- [ 0.363944] pm8953_l17: 2850 mV normal idle
- [ 0.364796] pm8953_l19: 1200 <--> 1350 mV at 1200 mV normal idle
- [ 0.365609] pm8953_l22: 2900 mV normal idle
- [ 0.366452] pm8953_l23: 975 <--> 1225 mV at 975 mV normal idle
- [ 0.367384] GFX_LDO: msm_gfx_ldo_voltage_init: LDO corner 1: target-volt = 580000 uV
- [ 0.367398] GFX_LDO: msm_gfx_ldo_voltage_init: LDO corner 2: target-volt = 650000 uV
- [ 0.367410] GFX_LDO: msm_gfx_ldo_voltage_init: LDO corner 3: target-volt = 720000 uV
- [ 0.367428] GFX_LDO: msm_gfx_ldo_adjust_init_voltage: adjusted the open-loop voltage[1] 580000 -> 615000
- [ 0.367440] GFX_LDO: msm_gfx_ldo_adjust_init_voltage: adjusted the open-loop voltage[2] 650000 -> 675000
- [ 0.367452] GFX_LDO: msm_gfx_ldo_voltage_init: LDO-mode fuse disabled by default
- [ 0.367779] msm_gfx_ldo: 0 <--> 0 mV at 0 mV
- [ 0.368125] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
- [ 0.369093] msm_thermal:sensor_mgr_init_threshold threshold id already initialized
- [ 0.369877] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
- [ 0.369892] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
- [ 0.369907] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
- [ 0.369918] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
- [ 0.369928] msm_thermal:vdd_restriction_reg_init Defer vdd rstr freq init.
- [ 0.372146] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
- [ 0.372161] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
- [ 0.372175] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
- [ 0.372187] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
- [ 0.372200] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
- [ 0.372211] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19
- [ 0.372223] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19)
- [ 0.372234] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19
- [ 0.399154] branch_clk_handoff: gcc_usb_phy_cfg_ahb_clk clock is enabled in HW
- [ 0.399173] branch_clk_handoff: even though ENABLE_BIT is not set
- [ 0.401541] qcom,gcc-8953 1800000.qcom,gcc: Registered GCC clocks
- [ 0.401831] cpu-clock-8953 b114000.qcom,cpu-clock-8953: Speed bin: 6 PVS Version: 0
- [ 0.406149] cpr3_regulator_measure_aging: apc: average quotient delta=14 (count=10)
- [ 0.406178] cpr3_regulator_aging_adjust: apc: aging measurement successful; aging reference adjustment voltage=0 uV
- [ 0.407743] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,dfs-sid-c0
- [ 0.407759] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No DFS SID tables found for Cluster-0
- [ 0.407774] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,link-sid-c0
- [ 0.407788] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No Link SID tables found for Cluster-0
- [ 0.407803] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,lmh-sid-c0
- [ 0.407816] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No LMH SID tables found for Cluster-0
- [ 0.407826] ramp_lmh_sid: Use Default LMH SID
- [ 0.407835] ramp_dfs_sid: Use Default DFS SID
- [ 0.407844] ramp_link_sid: Use Default Link SID
- [ 0.407913] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,dfs-sid-c1
- [ 0.407927] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No DFS SID tables found for Cluster-1
- [ 0.407941] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,link-sid-c1
- [ 0.407955] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No Link SID tables found for Cluster-1
- [ 0.407969] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,lmh-sid-c1
- [ 0.407982] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No LMH SID tables found for Cluster-1
- [ 0.407991] ramp_lmh_sid: Use Default LMH SID
- [ 0.407999] ramp_dfs_sid: Use Default DFS SID
- [ 0.408008] ramp_link_sid: Use Default Link SID
- [ 0.408077] clock_rcgwr_init: RCGwR Init Completed
- [ 0.408571] populate_opp_table: clock-cpu-8953: OPP tables populated (cpu 3 and 7)
- [ 0.408585] print_opp_table: clock_cpu: a53 C0: OPP voltage for 652800000: 1
- [ 0.408595] print_opp_table: clock_cpu: a53 C0: OPP voltage for 1804800000: 5
- [ 0.408605] print_opp_table: clock_cpu: a53 C1: OPP voltage for 652800000: 1
- [ 0.408614] print_opp_table: clock_cpu: a53 C2: OPP voltage for 1804800000: 5
- [ 0.411244] gcc-gfx-8953 1800000.qcom,gcc-gfx: Registered GCC GFX clocks.
- [ 0.472309] qcom,qpnp-pin qpnp-pin-16: qpnp_pin_probe: no device nodes specified in topology
- [ 0.472341] qcom,qpnp-pin: probe of qpnp-pin-16 failed with error -22
- [ 0.472740] msm_cpuss_dump soc:cpuss_dump: Couldn't get memory for dumping
- [ 0.472763] msm_cpuss_dump soc:cpuss_dump: Couldn't get memory for dumping
- [ 0.476859] KPI: Bootloader start count = 22616
- [ 0.476876] KPI: Bootloader end count = 70468
- [ 0.476885] KPI: Bootloader display count = 34984
- [ 0.476894] KPI: Bootloader load kernel count = 2249
- [ 0.476904] KPI: Kernel MPM timestamp = 94504
- [ 0.476912] KPI: Kernel MPM Clock frequency = 32768
- [ 0.476941] socinfo_print: v0.10, id=338, ver=1.1, raw_id=154, raw_ver=0, hw_plat=8, hw_plat_ver=65536
- [ 0.476941] accessory_chip=0, hw_plat_subtype=0, pmic_model=65558, pmic_die_revision=65536 foundry_id=2 serial_number=7707369
- [ 0.478272] eldo2_8953: no parameters
- [ 0.478751] qpnp_pin_of_gpio_xlate: no such PMIC gpio 5 in device topology
- [ 0.478892] adv_vreg: no parameters
- [ 0.479367] vdd_vreg: no parameters
- [ 0.480138] iovdd_gpio_vreg: no parameters
- [ 0.480704] vgaarb: loaded
- [ 0.482085] SCSI subsystem initialized
- [ 0.483241] usbcore: registered new interface driver usbfs
- [ 0.483331] usbcore: registered new interface driver hub
- [ 0.483590] usbcore: registered new device driver usb
- [ 0.485127] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
- [ 0.485498] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
- [ 0.485512] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
- [ 0.487209] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2
- [ 0.487500] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
- [ 0.487515] i2c-msm-v2 78b7000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
- [ 0.487817] i2c-msm-v2 78b7000.i2c: irq:176 when no active transfer
- [ 0.489402] i2c-msm-v2 7af5000.i2c: probing driver i2c-msm-v2
- [ 0.489678] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
- [ 0.489692] i2c-msm-v2 7af5000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
- [ 0.490996] i2c-msm-v2 7af8000.i2c: probing driver i2c-msm-v2
- [ 0.491239] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
- [ 0.491253] i2c-msm-v2 7af8000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
- [ 0.492871] media: Linux media interface: v0.10
- [ 0.492955] Linux video capture interface: v2.00
- [ 0.493059] EDAC MC: Ver: 3.0.0
- [ 0.600260] cpufreq: driver msm up and running
- [ 0.600394] aw2013 led driver: initialize.aw2013_led_probe start
- [ 0.730061] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
- [ 0.731071] platform soc:qcom,ion:qcom,ion-heap@8: assigned reserved memory node secure_region@0
- [ 0.731287] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region@0
- [ 0.731534] ION heap system created
- [ 0.731702] ION heap mm created at 0x00000000f6800000 with size 9800000
- [ 0.731716] ION heap qsecom created at 0x00000000f5800000 with size 1000000
- [ 0.732396] msm_bus_fabric_init_driver
- [ 0.743860] heming add qpnp_pon_probe
- [ 0.743934] qcom,qpnp-power-on qpnp-power-on-1: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'cold' boot
- [ 0.743952] qcom,qpnp-power-on qpnp-power-on-1: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
- [ 0.744125] input: qpnp_pon as /devices/virtual/input/input0
- [ 0.744658] heming add qpnp_pon_probe end
- [ 0.744708] heming add qpnp_pon_probe
- [ 0.744800] pon_spare_reg: no parameters
- [ 0.744880] qcom,qpnp-power-on qpnp-power-on-14: No PON config. specified
- [ 0.744931] qcom,qpnp-power-on qpnp-power-on-14: PMIC@SID2 Power-on reason: Triggered from PON1 (secondary PMIC) and 'cold' boot
- [ 0.744948] qcom,qpnp-power-on qpnp-power-on-14: PMIC@SID2: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
- [ 0.745006] heming add qpnp_pon_probe end
- [ 0.745143] PMIC@SID0: (null) v1.0 options: 2, 2, 0, 0
- [ 0.745244] PMIC@SID2: PMI8940 v2.0 options: 0, 0, 0, 0
- [ 0.746204] ipa ipa2_uc_state_check:296 uC interface not initialized
- [ 0.746218] ipa ipa_sps_irq_control_all:942 EP (2) not allocated.
- [ 0.746225] ipa ipa_sps_irq_control_all:942 EP (5) not allocated.
- [ 0.747704] sps:BAM 0x0000000007904000 is registered.
- [ 0.748290] sps:BAM 0x0000000007904000 (va:0xffffff8001840000) enabled: ver:0x27, number of pipes:20
- [ 0.751823] IPA driver initialization was successful.
- [ 0.753124] gdsc_venus: no parameters
- [ 0.753432] gdsc_mdss: no parameters
- [ 0.753689] gdsc_jpeg: no parameters
- [ 0.754131] gdsc_vfe: no parameters
- [ 0.754563] gdsc_vfe1: no parameters
- [ 0.754818] gdsc_cpp: no parameters
- [ 0.755035] gdsc_oxili_gx: no parameters
- [ 0.755128] gdsc_oxili_gx: supplied by msm_gfx_ldo
- [ 0.755365] gdsc_venus_core0: fast normal
- [ 0.755574] gdsc_oxili_cx: no parameters
- [ 0.755762] gdsc_usb30: no parameters
- [ 0.757005] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
- [ 0.757014] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled
- [ 0.757033] mdss_pll_util_parse_dt_supply: : error reading ulp load. rc=-22
- [ 0.757755] dsi_pll_clock_register_8996: Registered DSI PLL ndx=0 clocks successfully
- [ 0.757788] mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL
- [ 0.757795] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 1 PLL PLL SSC enabled
- [ 0.757811] mdss_pll_util_parse_dt_supply: : error reading ulp load. rc=-22
- [ 0.758927] pll_is_pll_locked_8996: DSI PLL ndx=1 status=0 failed to Lock
- [ 0.759393] dsi_pll_clock_register_8996: Registered DSI PLL ndx=1 clocks successfully
- [ 0.759978] msm_iommu 1e00000.qcom,iommu: device apps_iommu (model: 500) mapped at ffffff8001e00000, with 21 ctx banks
- [ 0.766551] msm_iommu_ctx 1e20000.qcom,iommu-ctx: context adsp_elf using bank 0
- [ 0.766722] msm_iommu_ctx 1e21000.qcom,iommu-ctx: context adsp_sec_pixel using bank 1
- [ 0.766880] msm_iommu_ctx 1e22000.qcom,iommu-ctx: context mdp_1 using bank 2
- [ 0.767041] msm_iommu_ctx 1e23000.qcom,iommu-ctx: context venus_fw using bank 3
- [ 0.767193] msm_iommu_ctx 1e24000.qcom,iommu-ctx: context venus_sec_non_pixel using bank 4
- [ 0.767349] msm_iommu_ctx 1e25000.qcom,iommu-ctx: context venus_sec_bitstream using bank 5
- [ 0.767505] msm_iommu_ctx 1e26000.qcom,iommu-ctx: context venus_sec_pixel using bank 6
- [ 0.767686] msm_iommu_ctx 1e28000.qcom,iommu-ctx: context pronto_pil using bank 8
- [ 0.767866] msm_iommu_ctx 1e29000.qcom,iommu-ctx: context q6 using bank 9
- [ 0.768043] msm_iommu_ctx 1e2a000.qcom,iommu-ctx: context periph_rpm using bank 10
- [ 0.768226] msm_iommu_ctx 1e2b000.qcom,iommu-ctx: context lpass using bank 11
- [ 0.768403] msm_iommu_ctx 1e2f000.qcom,iommu-ctx: context adsp_io using bank 15
- [ 0.768584] msm_iommu_ctx 1e30000.qcom,iommu-ctx: context adsp_opendsp using bank 16
- [ 0.768763] msm_iommu_ctx 1e31000.qcom,iommu-ctx: context adsp_shared using bank 17
- [ 0.768942] msm_iommu_ctx 1e32000.qcom,iommu-ctx: context cpp using bank 18
- [ 0.769123] msm_iommu_ctx 1e33000.qcom,iommu-ctx: context jpeg_enc0 using bank 19
- [ 0.769307] msm_iommu_ctx 1e34000.qcom,iommu-ctx: context vfe using bank 20
- [ 0.769490] msm_iommu_ctx 1e35000.qcom,iommu-ctx: context mdp_0 using bank 21
- [ 0.769669] msm_iommu_ctx 1e36000.qcom,iommu-ctx: context venus_ns using bank 22
- [ 0.769848] msm_iommu_ctx 1e38000.qcom,iommu-ctx: context ipa using bank 24
- [ 0.770044] msm_iommu_ctx 1e37000.qcom,iommu-ctx: context access_control using bank 23
- [ 0.772810] arm-smmu 1c40000.arm,smmu-kgsl: regulator defer delay 80
- [ 0.775070] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.775793] aw87319_pa_init Enter
- [ 0.810295] i2c-msm-v2 7af8000.i2c: msm_bus_scale_register_client(mstr-id:84):0x2 (ok)
- [ 0.830333] AW87319 CHIPID=0x9b
- [ 0.850543] Bluetooth: ffffffc0af44fcf8
- [ 0.850581] NET: Registered protocol family 31
- [ 0.850587] Bluetooth: ffffffc0af44fcf8
- [ 0.850597] Bluetooth: ffffffc0af44fcd8Bluetooth: ffffffc0af44fcb8
- [ 0.850633] Bluetooth: ffffffc0af44fcb8<6>[ 0.850960] cfg80211: Calling CRDA to update world regulatory domain
- [ 0.850980] cfg80211: World regulatory domain updated:
- [ 0.850986] cfg80211: DFS Master region: unset
- [ 0.850991] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
- [ 0.850999] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
- [ 0.851005] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
- [ 0.851011] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
- [ 0.851017] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
- [ 0.851023] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
- [ 0.851029] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
- [ 0.851034] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
- [ 0.851040] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
- [ 0.851142] pcie:pcie_init.
- [ 0.853014] ibb_reg: 4600 <--> 6000 mV at 5800 mV
- [ 0.853286] lab_reg: 4600 <--> 6000 mV at 5800 mV
- [ 0.853822] Switched to clocksource arch_sys_counter
- [ 0.895638] NET: Registered protocol family 2
- [ 0.896078] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
- [ 0.896256] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
- [ 0.896596] TCP: Hash tables configured (established 32768 bind 32768)
- [ 0.896648] TCP: reno registered
- [ 0.896658] UDP hash table entries: 2048 (order: 4, 65536 bytes)
- [ 0.896714] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
- [ 0.896919] NET: Registered protocol family 1
- [ 0.896951] PCI: CLS 0 bytes, default 64
- [ 0.898636] gcc-mdss-8953 1800000.qcom,gcc-mdss: Registered GCC MDSS clocks.
- [ 0.899290] Trying to unpack rootfs image as initramfs...
- [ 0.921915] Freeing initrd memory: 984K
- [ 0.926089] futex hash table entries: 2048 (order: 5, 131072 bytes)
- [ 0.926162] Initialise system trusted keyring
- [ 0.926223] audit: initializing netlink subsys (disabled)
- [ 0.926268] audit: type=2000 audit(0.919:1): initialized
- [ 0.926656] vmscan: error setting kswapd cpu affinity mask
- [ 0.930632] zbud: loaded
- [ 0.931177] VFS: Disk quotas dquot_6.5.2
- [ 0.931280] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.932683] Registering sdcardfs 0.1
- [ 0.933229] ntfs: driver 2.1.31 [Flags: R/O].
- [ 0.933387] fuse init (API version 7.23)
- [ 0.933895] SELinux: Registering netfilter hooks
- [ 0.935955] Key type asymmetric registered
- [ 0.935966] Asymmetric key parser 'x509' registered
- [ 0.936081] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
- [ 0.936091] io scheduler noop registered
- [ 0.936100] io scheduler deadline registered
- [ 0.936247] io scheduler cfq registered (default)
- [ 0.940819] adv7533_parse_vreg_dt: error read post on sleep. rc=-22
- [ 0.940831] adv7533_parse_vreg_dt: hpd-5v-en min=0, max=0, enable=0 disable=0 post-on-sleep=0
- [ 0.941276] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x39 MSTR_STS:0x0d1300c8 OPER:0x00000010
- [ 0.941298] msm_dba_helper_i2c_read: i2c read failed
- [ 0.941305] adv7533_read: read err: addr 0x39, reg 0x0, size 0x1
- [ 0.941310] adv7533_probe: Failed to read chip rev
- [ 0.941388] adv7533: probe of 2-0039 failed with error -5
- [ 0.941964] msm_dss_get_res_byname: 'vbif_nrt_phys' resource not found
- [ 0.941974] mdss_mdp_probe+0x27c/0x139c->msm_dss_ioremap_byname: 'vbif_nrt_phys' msm_dss_get_res_byname failed
- [ 0.942523] mdss_mdp_irq_clk_register: unable to get clk: lut_clk
- [ 0.943182] No change in context(0==0), skip
- [ 0.943861] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:0 num:0 rect:0 ndx:0x1 prio:0
- [ 0.943881] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:1 num:3 rect:0 ndx:0x8 prio:1
- [ 0.943887] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:5 num:4 rect:0 ndx:0x10 prio:2
- [ 0.943904] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:2 num:6 rect:0 ndx:0x40 prio:3
- [ 0.943919] mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:10 rect:0 ndx:0x400 prio:0
- [ 0.943931] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read
- [ 0.944026] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
- [ 0.944302] xlog_status: enable:1, panic:1, dump:2
- [ 0.945058] mdss_mdp_probe: mdss version = 0x10100000, bootloader display is on, num 1, intf_sel=0x00000100
- [ 0.945888] mdss_rotator_init_queue: work thread name=rot_thread_0
- [ 0.947818] mdss_smmu_util_parse_dt_clock: clocks are not defined
- [ 0.947871] mdss_smmu_probe: iommu v2 domain[0] mapping and clk register successful!
- [ 0.947899] mdss_smmu_util_parse_dt_clock: clocks are not defined
- [ 0.947932] mdss_smmu_probe: iommu v2 domain[2] mapping and clk register successful!
- [ 0.949521] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
- [ 0.949536] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
- [ 0.949549] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
- [ 0.950369] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
- [ 0.950835] mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_ft8613_ebbg_5p7_720p_video:1:none:cfg:single_dsi panel_name:qcom,mdss_dsi_ft8613_ebbg_5p7_720p_video
- [ 0.950923] mdss_dsi_panel_init: Panel Name = ft8613_ebbg_5p7_720p_video
- [ 0.951047] mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_ft8613_ebbg_5p7_720p_video" (ffffffc0af44f278)
- [ 0.951069] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
- [ 0.951078] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
- [ 0.951083] mdss_dsi_panel_get_dsc_cfg_np: cannot find dsc config node:
- [ 0.951175] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-idle-on-command
- [ 0.951183] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-idle-off-command
- [ 0.951191] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-warm-command
- [ 0.951201] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-cool-command
- [ 0.951209] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-nature-command
- [ 0.951218] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-ce-std-command
- [ 0.951227] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-ce-vivid-command
- [ 0.951235] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-ce-bright-command
- [ 0.951256] mdss_dsi_parse_panel_features: ulps feature disabled
- [ 0.951263] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
- [ 0.951270] mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
- [ 0.951333] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-lp-mode-on
- [ 0.951341] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-lp-mode-off
- [ 0.951451] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
- [ 0.951463] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
- [ 0.951473] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
- [ 0.951484] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
- [ 0.951774] mdss_dsi_parse_ctrl_params:4072 Unable to read qcom,display-id, data=0000000000000000,len=20
- [ 0.951783] mdss_dsi_parse_gpio_params:4107, TE gpio not specified
- [ 0.951789] mdss_dsi_parse_gpio_params: bklt_en gpio not specified
- [ 0.951855] msm_dss_get_res_byname: 'dsi_phy_regulator' resource not found
- [ 0.951867] mdss_dsi_retrieve_ctrl_resources+0x170/0x254->msm_dss_ioremap_byname: 'dsi_phy_regulator' msm_dss_get_res_byname failed
- [ 0.951873] mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff8000ff6000 ctrl_size=400 phy_base=ffffff8000ffc400 phy_size=580
- [ 0.951969] dsi_panel_device_register: Continuous splash enabled
- [ 0.952408] mdss_register_panel: adding framebuffer device 1a94000.qcom,mdss_dsi_ctrl0
- [ 0.954157] mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized, DSI rev:0x10040002, PHY rev:0x2
- [ 0.954402] mdss_dsi_status_init: DSI status check interval:5000
- [ 0.955910] mdss_register_panel: adding framebuffer device soc:qcom,mdss_wb_panel
- [ 0.956759] mdss_fb_probe: fb0: split_mode:0 left:0 right:0
- [ 0.957387] mdss_fb_register: FrameBuffer[0] 720x1440 registered successfully!
- [ 0.957917] mdss_fb_probe: fb1: split_mode:0 left:0 right:0
- [ 0.958015] mdss_fb_register: FrameBuffer[1] 640x640 registered successfully!
- [ 0.958098] mdss_mdp_splash_parse_dt: splash mem child node is not present
- [ 0.962013] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
- [ 0.962047] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
- [ 0.966722] In memshare_probe, Memshare probe success
- [ 0.969739] msm_rpm_log_probe: OK
- [ 0.971269] subsys-pil-tz soc:qcom,kgsl-hyp: for a506_zap segments only will be dumped.
- [ 0.973374] subsys-pil-tz 1de0000.qcom,venus: for venus segments only will be dumped.
- [ 0.977714] msm_serial_hs module loaded
- [ 0.988401] ------------[ cut here ]------------
- [ 0.988423] WARNING: CPU: 7 PID: 1 at ../../../../../../kernel/xiaomi/msm8953/drivers/gpu/msm/kgsl_pwrctrl.c:2075 kgsl_pwrctrl_clk_set_rate+0x48/0x58()
- [ 0.988429] KGSL:rbbmtimer_clk set freq -22 failed:-22
- [ 0.988434] Modules linked in:
- [ 0.988445] CPU: 7 PID: 1 Comm: swapper/0 Not tainted 3.18.131-Teamlions-g82311c9f199 #1
- [ 0.988449] Hardware name: Qualcomm Technologies, Inc. SDM450 QRD (DT)
- [ 0.988455] Call trace:
- [ 0.988464] [<ffffffc00008984c>] dump_backtrace+0x0/0x27c
- [ 0.988471] [<ffffffc000089adc>] show_stack+0x14/0x1c
- [ 0.988479] [<ffffffc000fcabcc>] dump_stack+0x80/0xa4
- [ 0.988486] [<ffffffc0000a3ec4>] warn_slowpath_common+0x88/0xac
- [ 0.988491] [<ffffffc0000a3f48>] warn_slowpath_fmt+0x60/0x80
- [ 0.988498] [<ffffffc0005bcac8>] kgsl_pwrctrl_clk_set_rate+0x48/0x58
- [ 0.988505] [<ffffffc0005c0d84>] kgsl_pwrctrl_init+0x2e4/0x700
- [ 0.988513] [<ffffffc0005ae074>] kgsl_device_platform_probe+0xf8/0x578
- [ 0.988520] [<ffffffc0005e824c>] adreno_probe+0x58c/0x6dc
- [ 0.988528] [<ffffffc0005f80c4>] platform_drv_probe+0x38/0x84
- [ 0.988534] [<ffffffc0005f623c>] driver_probe_device+0x164/0x37c
- [ 0.988540] [<ffffffc0005f64b8>] __driver_attach+0x64/0x90
- [ 0.988546] [<ffffffc0005f505c>] bus_for_each_dev+0x80/0xb0
- [ 0.988552] [<ffffffc0005f5c38>] driver_attach+0x20/0x28
- [ 0.988558] [<ffffffc0005f5780>] bus_add_driver+0x138/0x240
- [ 0.988564] [<ffffffc0005f7070>] driver_register+0x94/0xe0
- [ 0.988570] [<ffffffc0005f800c>] __platform_driver_register+0x60/0x68
- [ 0.988577] [<ffffffc0018903a8>] kgsl_3d_init+0x3c/0x64
- [ 0.988583] [<ffffffc000082b6c>] do_one_initcall+0x194/0x1b0
- [ 0.988591] [<ffffffc001854bb4>] kernel_init_freeable+0x1a8/0x25c
- [ 0.988599] [<ffffffc000fc4258>] kernel_init+0x10/0xf4
- [ 0.988615] ---[ end trace 48a5503fc85943fd ]---
- [ 0.990258] platform 1c40000.qcom,kgsl-iommu:gfx3d_secure: assigned reserved memory node secure_region@0
- [ 0.996619] brd: module loaded
- [ 0.998425] loop: module loaded
- [ 0.998704] zram: Created 1 device(s) ...
- [ 0.999295] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1001000
- [ 0.999325] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
- [ 0.999334] QSEECOM: qseecom_probe: qseecom clocks handled by other subsystem
- [ 0.999341] QSEECOM: qseecom_probe: qsee reentrancy support phase is not defined, setting to default 0
- [ 1.000015] QSEECOM: qseecom_probe: qseecom.whitelist_support = 1
- [ 1.002501] i2c-core: driver [tabla-i2c-core] using legacy suspend method
- [ 1.002509] i2c-core: driver [tabla-i2c-core] using legacy resume method
- [ 1.002589] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
- [ 1.002594] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
- [ 1.002675] i2c-core: driver [tasha-i2c-core] using legacy suspend method
- [ 1.002680] i2c-core: driver [tasha-i2c-core] using legacy resume method
- [ 1.003393] nq-nci 5-0028: ese GPIO <OPTIONAL> error getting from OF node
- [ 1.003562] nq-nci 5-0028: nqx_probe: ese gpio not provided
- [ 1.004189] qce 720000.qcedev: Qualcomm Crypto 5.3.3 device found @0x720000
- [ 1.004200] qce 720000.qcedev: CE device = 0x0
- [ 1.004200] IO base, CE = 0xffffff8001cc0000
- [ 1.004200] Consumer (IN) PIPE 2, Producer (OUT) PIPE 3
- [ 1.004200] IO base BAM = 0x0000000000000000
- [ 1.004200] BAM IRQ 195
- [ 1.004200] Engines Availability = 0x2010853
- [ 1.004403] sps:BAM 0x0000000000704000 is registered.
- [ 1.004583] sps:BAM 0x0000000000704000 (va:0xffffff8001f40000) enabled: ver:0x27, number of pipes:8
- [ 1.004704] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000704000 irq 195
- [ 1.006447] qcrypto 720000.qcrypto: Qualcomm Crypto 5.3.3 device found @0x720000
- [ 1.006458] qcrypto 720000.qcrypto: CE device = 0x0
- [ 1.006458] IO base, CE = 0xffffff8002040000
- [ 1.006458] Consumer (IN) PIPE 4, Producer (OUT) PIPE 5
- [ 1.006458] IO base BAM = 0x0000000000000000
- [ 1.006458] BAM IRQ 195
- [ 1.006458] Engines Availability = 0x2010853
- [ 1.006624] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000704000 irq 195
- [ 1.007152] qcrypto 720000.qcrypto: qcrypto-ecb-aes
- [ 1.007243] qcrypto 720000.qcrypto: qcrypto-cbc-aes
- [ 1.007333] qcrypto 720000.qcrypto: qcrypto-ctr-aes
- [ 1.007417] qcrypto 720000.qcrypto: qcrypto-ecb-des
- [ 1.007499] qcrypto 720000.qcrypto: qcrypto-cbc-des
- [ 1.007582] qcrypto 720000.qcrypto: qcrypto-ecb-3des
- [ 1.007664] qcrypto 720000.qcrypto: qcrypto-cbc-3des
- [ 1.007746] qcrypto 720000.qcrypto: qcrypto-xts-aes
- [ 1.007829] qcrypto 720000.qcrypto: qcrypto-sha1
- [ 1.007912] qcrypto 720000.qcrypto: qcrypto-sha256
- [ 1.007996] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
- [ 1.008083] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
- [ 1.008168] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
- [ 1.008251] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
- [ 1.008334] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
- [ 1.008417] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
- [ 1.008501] qcrypto 720000.qcrypto: qcrypto-hmac-sha1
- [ 1.008583] qcrypto 720000.qcrypto: qcrypto-hmac-sha256
- [ 1.008667] qcrypto 720000.qcrypto: qcrypto-aes-ccm
- [ 1.008750] qcrypto 720000.qcrypto: qcrypto-rfc4309-aes-ccm
- [ 1.008756] qcrypto: FIPS140-2 Known Answer Tests: Skipped
- [ 1.010251] qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed
- [ 1.010411] ICE IRQ = 196
- [ 1.011750] SCSI Media Changer driver v0.25
- [ 1.013309] spi_master spi6: will run message pump with realtime priority
- [ 1.014007] sps: BAM device 0x0000000007ac4000 is not registered yet.
- [ 1.014200] sps:BAM 0x0000000007ac4000 is registered.
- [ 1.014927] sps:BAM 0x0000000007ac4000 (va:0xffffff8001ca0000) enabled: ver:0x19, number of pipes:12
- [ 1.016231] tun: Universal TUN/TAP device driver, 1.6
- [ 1.016237] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 1.016308] PPP generic driver version 2.4.2
- [ 1.016398] PPP BSD Compression module registered
- [ 1.016408] PPP Deflate Compression module registered
- [ 1.016437] PPP MPPE Compression module registered
- [ 1.016451] NET: Registered protocol family 24
- [ 1.017339] wcnss_wlan probed in built-in mode
- [ 1.018395] usbcore: registered new interface driver asix
- [ 1.018468] usbcore: registered new interface driver ax88179_178a
- [ 1.018506] usbcore: registered new interface driver cdc_ether
- [ 1.018545] usbcore: registered new interface driver net1080
- [ 1.018583] usbcore: registered new interface driver cdc_subset
- [ 1.018620] usbcore: registered new interface driver zaurus
- [ 1.018784] usbcore: registered new interface driver cdc_ncm
- [ 1.019218] msm_sharedmem: sharedmem_register_qmi: qmi init successful
- [ 1.020242] scm_call failed: func id 0x42000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0
- [ 1.020250] hyp_assign_table: Failed to assign memory protection, ret = -5
- [ 1.020258] msm_sharedmem: setup_shared_ram_perms: hyp_assign_phys failed IPA=0x0160x00000000f4800000 size=1572864 err=-5
- [ 1.020361] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
- [ 1.022911] 78000.ssphy supply core not found, using dummy regulator
- [ 1.022967] (NULL device *): unable to set voltage for core_ldo
- [ 1.027660] msm-dwc3 7000000.ssusb: unable to get dbm device
- [ 1.029906] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.030404] ehci-pci: EHCI PCI platform driver
- [ 1.030466] ehci-msm: Qualcomm On-Chip EHCI Host Controller
- [ 1.030950] usbcore: registered new interface driver cdc_acm
- [ 1.030956] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- [ 1.031009] usbcore: registered new interface driver usb-storage
- [ 1.031041] usbcore: registered new interface driver ums-alauda
- [ 1.031078] usbcore: registered new interface driver ums-cypress
- [ 1.031110] usbcore: registered new interface driver ums-datafab
- [ 1.031142] usbcore: registered new interface driver ums-freecom
- [ 1.031174] usbcore: registered new interface driver ums-isd200
- [ 1.031205] usbcore: registered new interface driver ums-jumpshot
- [ 1.031238] usbcore: registered new interface driver ums-karma
- [ 1.031270] usbcore: registered new interface driver ums-sddr09
- [ 1.031302] usbcore: registered new interface driver ums-sddr55
- [ 1.031334] usbcore: registered new interface driver ums-usbat
- [ 1.031419] usbcore: registered new interface driver usbserial
- [ 1.031457] usbcore: registered new interface driver usb_ehset_test
- [ 1.032062] gbridge_init: gbridge_init successs.
- [ 1.032496] mousedev: PS/2 mouse device common for all mice
- [ 1.032685] usbcore: registered new interface driver xpad
- [ 1.034188] [FTS][Info]Lcdname:ft8613_ebbg_5p7_720p_video
- [ 1.034196] [FTS][Info]x_min:0 y_min:0 x_max:720 y_max:1440
- [ 1.034211] [FTS][Error]Unable to get max-touch-number
- [ 1.034348] input: fts_ts as /devices/soc/78b7000.i2c/i2c-3/3-0038/input/input1
- [ 1.034418] [FTS][Info]CHIP TYPE ID = 0x8613
- [ 1.050319] 3-0038 supply vcc_i2c not found, using dummy regulator
- [ 1.060306] i2c-msm-v2 7af5000.i2c: msm_bus_scale_register_client(mstr-id:84):0xf (ok)
- [ 1.060430] i2c-msm-v2 7af5000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:1 cur:0 tx) bc(rx:0 tx:4) mode:FIFO slv_addr:0x28 MSTR_STS:0x001321c4 OPER:0x00000090
- [ 1.060460] nq-nci 5-0028: nfcc_hw_check: - i2c_master_send Error
- [ 1.060467] nq-nci 5-0028: nfcc_hw_check: - NFCC HW not available
- [ 1.060565] ------------[ cut here ]------------
- [ 1.060578] WARNING: CPU: 1 PID: 6 at ../../../../../../kernel/xiaomi/msm8953/drivers/gpio/gpiolib.c:68 gpio_to_desc+0x2c/0x50()
- [ 1.060582] invalid GPIO -22
- [ 1.060587] Modules linked in:
- [ 1.060598] CPU: 1 PID: 6 Comm: kworker/u16:0 Tainted: G W 3.18.131-Teamlions-g82311c9f199 #1
- [ 1.060603] Hardware name: Qualcomm Technologies, Inc. SDM450 QRD (DT)
- [ 1.060617] Workqueue: events_unbound async_run_entry_fn
- [ 1.060623] Call trace:
- [ 1.060633] [<ffffffc00008984c>] dump_backtrace+0x0/0x27c
- [ 1.060639] [<ffffffc000089adc>] show_stack+0x14/0x1c
- [ 1.060647] [<ffffffc000fcabcc>] dump_stack+0x80/0xa4
- [ 1.060654] [<ffffffc0000a3ec4>] warn_slowpath_common+0x88/0xac
- [ 1.060660] [<ffffffc0000a3f48>] warn_slowpath_fmt+0x60/0x80
- [ 1.060665] [<ffffffc0003ee504>] gpio_to_desc+0x2c/0x50
- [ 1.060671] [<ffffffc0003efd5c>] gpio_free+0xc/0x18
- [ 1.060679] [<ffffffc000652a6c>] nqx_probe+0xa30/0xadc
- [ 1.060687] [<ffffffc000812004>] i2c_device_probe+0xdc/0x110
- [ 1.060695] [<ffffffc0005f623c>] driver_probe_device+0x164/0x37c
- [ 1.060701] [<ffffffc0005f64b8>] __driver_attach+0x64/0x90
- [ 1.060706] [<ffffffc0005f505c>] bus_for_each_dev+0x80/0xb0
- [ 1.060712] [<ffffffc0005f5c38>] driver_attach+0x20/0x28
- [ 1.060718] [<ffffffc0005f43e8>] driver_attach_async+0x14/0x4c
- [ 1.060724] [<ffffffc0000c1d18>] async_run_entry_fn+0x7c/0x164
- [ 1.060732] [<ffffffc0000bac04>] process_one_work+0x270/0x40c
- [ 1.060738] [<ffffffc0000bb3ec>] worker_thread+0x324/0x448
- [ 1.060745] [<ffffffc0000bf62c>] kthread+0xe4/0xec
- [ 1.060750] ---[ end trace 48a5503fc85943fe ]---
- [ 1.060764] nq-nci 5-0028: nqx_probe: probing nqxx failed, check hardware
- [ 1.290253] i2c-msm-v2 78b7000.i2c: msm_bus_scale_register_client(mstr-id:86):0x10 (ok)
- [ 1.290624] [FTS][Info]TP Ready, Device ID = 0x86
- [ 1.290796] [FTS][Info]Create proc entry success!
- [ 1.290832] [FTS][Info][EX]: sysfs_create_group() succeeded!!
- [ 1.290837] [FTS][Mode]create sysfs succeeded
- [ 1.290849] [FTS]Created proc entry /proc/onoff !
- [ 1.290856] [FTS]Created proc entry /proc/data !
- [ 1.290999] [FTS][Info][ESD]: ESD check start!!
- [ 1.291339] [FTS][Info]vendor_id=0xd0
- [ 1.291345] [FTS][Info]tp_fw=0x9
- [ 1.291352] [FTS][TEST][Info]fts_test_init. line: 827. Test version: V1.0.0--2016-12-28, (sync version of FT_MultipleTest: V4.0.0.0 ------ 2016-07-18)
- [ 1.310373] [FTS][Info]tpd_probe, ft8716_ctpm_LockDownInfo_get_from_boot, tp_lockdown_info=41373201d1003200
- [ 1.310398] [FTS][Info]Normal mode
- [ 1.310495] [FTS][UPGRADE]******************************FTS enter upgrade******************************
- [ 1.310501] [FTS][Info][ESD]: ESD check stop!!
- [ 1.310508] [FTS][UPGRADE]********************check upgrade need or not********************
- [ 1.310832] [FTS][UPGRADE]: chip_id = 8613, chip_types.chip_idh = 8613
- [ 1.310837] [FTS][UPGRADE]: fw_status = 1!!
- [ 1.310842] [FTS][Info][UPGRADE]**********FW APP valid**********
- [ 1.310848] [FTS][UPGRADE]FW FILE:CTPM_FW, SIZE:e740
- [ 1.310927] [FTS8006m][Info]Lcdname:ft8613_ebbg_5p7_720p_video
- [ 1.310935] [FTS8006m][Info]x_min:0 y_min:0 x_max:720 y_max:1440
- [ 1.310952] [FTS8006m][Error]Unable to get max-touch-number
- [ 1.311009] [FTS][UPGRADE]: uc_tp_fm_ver = 0x9, uc_host_fm_ver = 0x9!!
- [ 1.311014] [FTS][UPGRADE]**********Don't need upgrade fw**********
- [ 1.311019] [FTS][UPGRADE]**********bUpgradeFlag = 0x0**********
- [ 1.311023] [FTS][UPGRADE]**********No Upgrade, exit**********
- [ 1.311028] [FTS][Info][ESD]: ESD check start!!
- [ 1.311037] [FTS][UPGRADE]******************************FTS exit upgrade******************************
- [ 1.311128] input: ft8006m_ts as /devices/soc/78b7000.i2c/i2c-3/3-0039/input/input2
- [ 1.311197] [FTS8006m][Info]CHIP TYPE ID = 0x8006
- [ 1.311203] [FTS8006m][Error][GPIO]irq gpio request failed
- [ 1.311208] [FTS8006m][Error][GPIO]Failed to configure the gpios
- [ 1.340150] ft8006m_ts: probe of 3-0039 failed with error -16
- [ 1.341516] [radio_frequence]: radio frequence detection probe start
- [ 1.341666] input: radio_frequence as /devices/soc/soc:radio_frequence/input/input3
- [ 1.341879] [radio_frequence]: radio frequence detection probe end
- [ 1.342289] qcom,qpnp-rtc qpnp-rtc-8: rtc core: registered qpnp_rtc as rtc0
- [ 1.342441] i2c /dev entries driver
- [ 1.352346] msm_camera_get_dt_vreg_data:1198 number of entries is 0 or not present in dts
- [ 1.354766] msm_camera_get_dt_vreg_data:1198 number of entries is 0 or not present in dts
- [ 1.355621] msm_camera_get_dt_vreg_data:1198 number of entries is 0 or not present in dts
- [ 1.356291] msm_camera_get_dt_vreg_data:1198 number of entries is 0 or not present in dts
- [ 1.358605] msm_camera_get_dt_vreg_data:1198 number of entries is 0 or not present in dts
- [ 1.359843] msm_camera_get_dt_vreg_data:1198 number of entries is 0 or not present in dts
- [ 1.361103] msm_camera_get_dt_vreg_data:1198 number of entries is 0 or not present in dts
- [ 1.362054] msm_actuator_platform_probe:1988 No valid actuator GPIOs data
- [ 1.363028] msm_eeprom_platform_probe qcom,eeprom-name ovt_ov12a10_i, rc 0
- [ 1.363105] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22
- [ 1.376419] msm_cci_init:1439: hw_version = 0x10020005
- [ 1.376446] the eeprom is not insensor!
- [ 1.377437] eeprom ovt_ov12a10_i read module id 7match id for ovt_ov12a10_i module_id=7
- [ 2.178082] msm_eeprom_platform_probe qcom,eeprom-name sony_imx486_ii, rc 0
- [ 2.178159] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22
- [ 2.191811] msm_cci_init:1439: hw_version = 0x10020005
- [ 2.191836] the eeprom is not insensor!
- [ 2.192824] eeprom sony_imx486_ii read module id 7
- [ 2.192829] msm_eeprom_platform_probe match id for sony_imx486_ii failed
- [ 2.205424] msm_eeprom_platform_probe qcom,eeprom-name ovt_ov5675_i, rc 0
- [ 2.205513] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22
- [ 2.246121] msm_cci_init:1439: hw_version = 0x10020005
- [ 2.246147] insensor eeprom todo init the otp register!
- [ 2.246153] eeprom_init_ov5675_reg_otp 45 E
- [ 2.246597] msm_cci_irq:1797 MASTER_1 error 0x20000000
- [ 2.740064] msm_cci_wait: 301 wait for queue: 0
- [ 2.740081] msm_cci_transfer_end: 548 failed rc -110
- [ 2.740086] msm_cci_data_queue: 808 failed rc -110
- [ 2.740092] msm_camera_cci_i2c_write: line 144 rc = -110
- [ 2.760042] i2c write faild
- [ 2.760059] msm_cci_i2c_read:955 read_words = 0, exp words = 1
- [ 2.760064] msm_cci_i2c_read_bytes:1038 failed rc -22
- [ 2.760069] msm_camera_cci_i2c_read: line 56 rc = -22
- [ 2.760074] eeprom match otp id failed! map valid data is 0 !
- [ 2.760079] eeprom ovt_ov5675_i read module id 65535
- [ 2.760083] msm_eeprom_platform_probe match id for ovt_ov5675_i failed
- [ 2.798853] msm_eeprom_platform_probe qcom,eeprom-name ovt_ov5675_ii, rc 0
- [ 2.798944] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22
- [ 2.840518] msm_cci_init:1439: hw_version = 0x10020005
- [ 2.840543] insensor eeprom todo init the otp register!
- [ 2.840549] eeprom_init_ov5675_reg_otp 45 E
- [ 2.920042] eeprom_init_ov5675_reg_otp : 70 X
- [ 2.921028] eeprom ovt_ov5675_ii read module id 7
- [ 2.939644] match id for ovt_ov5675_ii module_id=7
- [ 2.979635] msm_flash_get_dt_data:1121 No valid flash GPIOs data
- [ 2.979879] LED trigger switch_trigger failed to register (-17)
- [ 2.979953] msm_flash_get_dt_data:1121 No valid flash GPIOs data
- [ 2.980083] ------------[ cut here ]------------
- [ 2.980097] WARNING: CPU: 0 PID: 1 at ../../../../../../kernel/xiaomi/msm8953/fs/sysfs/dir.c:31 sysfs_warn_dup+0x68/0x80()
- [ 2.980103] sysfs: cannot create duplicate filename '/class/leds/flashlight'
- [ 2.980108] Modules linked in:
- [ 2.980120] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.18.131-Teamlions-g82311c9f199 #1
- [ 2.980124] Hardware name: Qualcomm Technologies, Inc. SDM450 QRD (DT)
- [ 2.980130] Call trace:
- [ 2.980140] [<ffffffc00008984c>] dump_backtrace+0x0/0x27c
- [ 2.980146] [<ffffffc000089adc>] show_stack+0x14/0x1c
- [ 2.980155] [<ffffffc000fcabcc>] dump_stack+0x80/0xa4
- [ 2.980161] [<ffffffc0000a3ec4>] warn_slowpath_common+0x88/0xac
- [ 2.980167] [<ffffffc0000a3f48>] warn_slowpath_fmt+0x60/0x80
- [ 2.980173] [<ffffffc0002249dc>] sysfs_warn_dup+0x68/0x80
- [ 2.980180] [<ffffffc000224d18>] sysfs_do_create_link_sd.isra.2+0x9c/0xb4
- [ 2.980187] [<ffffffc000224d64>] sysfs_create_link+0x34/0x3c
- [ 2.980194] [<ffffffc0005f335c>] device_add+0x260/0x55c
- [ 2.980200] [<ffffffc0005f37fc>] device_create_groups_vargs+0xb0/0xf4
- [ 2.980206] [<ffffffc0005f3950>] device_create_with_groups+0x5c/0x7c
- [ 2.980214] [<ffffffc0009efe40>] led_classdev_register+0x44/0x15c
- [ 2.980221] [<ffffffc0008beeec>] msm_flash_platform_probe+0x320/0x3c8
- [ 2.980229] [<ffffffc0005f80c4>] platform_drv_probe+0x38/0x84
- [ 2.980235] [<ffffffc0005f623c>] driver_probe_device+0x164/0x37c
- [ 2.980241] [<ffffffc0005f64b8>] __driver_attach+0x64/0x90
- [ 2.980247] [<ffffffc0005f505c>] bus_for_each_dev+0x80/0xb0
- [ 2.980253] [<ffffffc0005f5c38>] driver_attach+0x20/0x28
- [ 2.980259] [<ffffffc0005f5780>] bus_add_driver+0x138/0x240
- [ 2.980265] [<ffffffc0005f7070>] driver_register+0x94/0xe0
- [ 2.980271] [<ffffffc0005f800c>] __platform_driver_register+0x60/0x68
- [ 2.980280] [<ffffffc001899404>] msm_flash_init_module+0x58/0xbc
- [ 2.980286] [<ffffffc000082b6c>] do_one_initcall+0x194/0x1b0
- [ 2.980294] [<ffffffc001854bb4>] kernel_init_freeable+0x1a8/0x25c
- [ 2.980302] [<ffffffc000fc4258>] kernel_init+0x10/0xf4
- [ 2.980307] ---[ end trace 48a5503fc85943ff ]---
- [ 2.980335] msm_torch_create_classdev:135 Failed to register 0 led dev. rc = -17
- [ 2.980347] qcom,camera-flash: probe of soc:qcom,camera-flash@0 failed with error -17
- [ 2.981693] adp1660 i2c_add_driver success
- [ 2.988110] MSM-CPP cpp_init_hardware:1016 CPP HW Version: 0x40030003
- [ 2.988124] MSM-CPP cpp_init_hardware:1034 stream_cnt:0
- [ 2.990672] CAM-SOC msm_camera_get_reg_base:787 err: mem resource vfe_fuse not found
- [ 2.990680] CAM-SOC msm_camera_get_res_size:830 err: mem resource vfe_fuse not found
- [ 2.992138] CAM-SOC msm_camera_get_reg_base:787 err: mem resource vfe_fuse not found
- [ 2.992146] CAM-SOC msm_camera_get_res_size:830 err: mem resource vfe_fuse not found
- [ 3.001037] __msm_jpeg_init:1537] Jpeg Device id 0
- [ 3.004389] FG: get_area_version: Normal version!
- [ 3.004509] FG: fg_check_ima_exception: Initial ima_err_sts=0 ima_exp_sts=0 ima_hw_sts=22
- [ 3.006104] FG: fg_probe: FG Probe success - FG Revision DIG:3.1 ANA:1.2 PMIC subtype=64
- [ 3.008298] unable to find DT imem DLOAD mode node
- [ 3.009144] unable to find DT imem EDLOAD mode node
- [ 3.011109] thermal thermal_zone1: failed to read out thermal zone 1
- [ 3.011294] thermal thermal_zone2: failed to read out thermal zone 2
- [ 3.011473] thermal thermal_zone3: failed to read out thermal zone 3
- [ 3.033478] device-mapper: uevent: version 1.0.3
- [ 3.033649] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com
- [ 3.033760] device-mapper: req-crypt: dm-req-crypt successfully initalized.
- [ 3.034893] sdhci: Secure Digital Host Controller Interface driver
- [ 3.034899] sdhci: Copyright(c) Pierre Ossman
- [ 3.034906] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 3.035980] qcom_ice_get_pdevice: found ice device ffffffc0acb69200
- [ 3.035988] qcom_ice_get_pdevice: matching platform device ffffffc0ae6d0400
- [ 3.040189] qcom_ice 7803000.sdcc1ice: QC ICE 2.1.44 device found @0xffffff8001af0000
- [ 3.040630] sdhci_msm 7824900.sdhci: No vmmc regulator found
- [ 3.040637] sdhci_msm 7824900.sdhci: No vqmmc regulator found
- [ 3.041008] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using 64-bit ADMA in CMDQ mode
- [ 3.070246] sdhci_msm 7864900.sdhci: sdhci_msm_probe: ICE device is not enabled
- [ 3.084871] sdhci_msm 7864900.sdhci: No vmmc regulator found
- [ 3.084880] sdhci_msm 7864900.sdhci: No vqmmc regulator found
- [ 3.085239] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using 64-bit ADMA in legacy mode
- [ 3.106179] mmc0: Out-of-interrupt timeout is 100[ms]
- [ 3.106184] mmc0: BKOPS_EN equals 0x2
- [ 3.106190] mmc0: eMMC FW version: 0x01
- [ 3.106195] mmc0: CMDQ supported: depth: 16
- [ 3.106200] mmc0: cache barrier support 0 flush policy 0
- [ 3.114148] msm8953-pinctrl 1000000.pinctrl: pin GPIO_20 already requested by 7af6000.spi; cannot claim for soc:gpio-leds
- [ 3.114157] msm8953-pinctrl 1000000.pinctrl: pin-20 (soc:gpio-leds) status -22
- [ 3.114164] msm8953-pinctrl 1000000.pinctrl: could not request pin 20 (GPIO_20) from group gpio20 on device 1000000.pinctrl
- [ 3.114171] leds-gpio soc:gpio-leds: Error applying setting, reverse things back
- [ 3.114337] msm8953-pinctrl 1000000.pinctrl: pin GPIO_20 already requested by 7af6000.spi; cannot claim for soc:gpio-leds
- [ 3.114345] msm8953-pinctrl 1000000.pinctrl: pin-20 (soc:gpio-leds) status -22
- [ 3.114352] msm8953-pinctrl 1000000.pinctrl: could not request pin 20 (GPIO_20) from group gpio20 on device 1000000.pinctrl
- [ 3.114358] leds-gpio soc:gpio-leds: Error applying setting, reverse things back
- [ 3.114369] leds-gpio soc:gpio-leds: pins are not configured from the driver
- [ 3.114731] qcom,leds-qpnp: probe of leds-qpnp-20 failed with error -10
- [ 3.115918] cmdq_host_alloc_tdl: desc_size: 768 data_sz: 253952 slot-sz: 24
- [ 3.116125] mmc0: CMDQ enabled on card
- [ 3.116136] mmc0: new HS400 MMC card at address 0001
- [ 3.116457] sdhci_msm_pm_qos_cpu_init (): voted for group #0 (mask=0xf) latency=2
- [ 3.116466] sdhci_msm_pm_qos_cpu_init (): voted for group #1 (mask=0xf0) latency=2
- [ 3.116602] mmcblk0: mmc0:0001 GD6BMB 29.1 GiB
- [ 3.116714] mmcblk0rpmb: mmc0:0001 GD6BMB partition 3 4.00 MiB
- [ 3.117391] hidraw: raw HID events driver (C) Jiri Kosina
- [ 3.117713] tz_log 8600720.tz-log: Hyp log service is not supported
- [ 3.118005] usbcore: registered new interface driver usbhid
- [ 3.118010] usbhid: USB HID core driver
- [ 3.118480] ashmem: initialized
- [ 3.118683] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 p34 p35 p36 p37 p38 p39 p40 p41 p42 p43 p44 p45 p46 p47 p48 p49
- [ 3.119097] qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=2100 ohm
- [ 3.125322] bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
- [ 3.128882] devfreq soc:qcom,cpubw: Couldn't update frequency transition information.
- [ 3.129175] devfreq soc:qcom,mincpubw: Couldn't update frequency transition information.
- [ 3.131680] sensors-ssc soc:qcom,msm-ssc-sensors: msm_ssc_sensors_dt_parse: get qdsp timer cntpct hi offset fail
- [ 3.131691] sensors-ssc soc:qcom,msm-ssc-sensors: slpi_loader_init_sysfs: Could not parse dt
- [ 3.132504] input: uinput-goodix as /devices/virtual/input/input4
- [ 3.132576] gf_spi: version V1.2.10
- [ 3.132711] gf_spi: status = 0x0
- [ 3.133449] fpc1020 soc:fpc1020: fpc1020_probe: ok
- [ 3.133561] fpc1020_init OK
- [ 3.133766] usbcore: registered new interface driver snd-usb-audio
- [ 3.150548] msm-pcm-lpa soc:qcom,msm-pcm-lpa: msm_pcm_probe: dev name soc:qcom,msm-pcm-lpa
- [ 3.157264] u32 classifier
- [ 3.157272] Actions configured
- [ 3.157307] Netfilter messages via NETLINK v0.30.
- [ 3.157357] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- [ 3.157670] ctnetlink v0.93: registering with nfnetlink.
- [ 3.158252] xt_time: kernel timezone is -0000
- [ 3.158498] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 3.158672] arp_tables: (C) 2002 David S. Miller
- [ 3.158727] TCP: cubic registered
- [ 3.158737] Initializing XFRM netlink socket
- [ 3.159047] NET: Registered protocol family 10
- [ 3.159931] mip6: Mobile IPv6
- [ 3.159958] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 3.160117] sit: IPv6 over IPv4 tunneling driver
- [ 3.160506] NET: Registered protocol family 17
- [ 3.160528] NET: Registered protocol family 15
- [ 3.160561] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
- [ 3.160571] Ebtables v2.0 registered
- [ 3.160688] l2tp_core: L2TP core driver, V2.0
- [ 3.160704] l2tp_ppp: PPPoL2TP kernel driver, V2.0
- [ 3.160713] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
- [ 3.160733] l2tp_netlink: L2TP netlink interface
- [ 3.160761] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
- [ 3.160795] l2tp_debugfs: L2TP debugfs support
- [ 3.160804] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
- [ 3.161585] NET: Registered protocol family 27
- [ 3.166434] subsys-pil-tz a21b000.qcom,pronto: for wcnss segments only will be dumped.
- [ 3.168137] pil-q6v5-mss 4080000.qcom,mss: for modem segments only will be dumped.
- [ 3.171844] sps:BAM 0x0000000007104000 is registered.
- [ 3.175280] qpnp-smbcharger qpnp-smbcharger-17: node /soc/qcom,spmi@200f000/qcom,pmi8940@2/qcom,qpnp-smbcharger IO resource absent!
- [ 3.175471] smbcharger_charger_otg: no parameters
- [ 3.175575] SMBCHG: smbchg_hvdcp_enable_cb: smbchg_hvdcp_enable_cb enable 0
- [ 3.176433] smbchg_hw_init:read OTG_CFG=78
- [ 3.231070] battery powe supply creat attr file!!
- [ 3.234039] qpnp-smbcharger qpnp-smbcharger-17: node /soc/qcom,spmi@200f000/qcom,pmi8940@2/qcom,qpnp-smbcharger IO resource absent!
- [ 3.234835] qpnp-smbcharger qpnp-smbcharger-17: SMBCHG successfully probe Charger version=SCHG_LITE Revision DIG:0.0 ANA:0.1 batt=1 dc=0 usb=0
- [ 3.236472] EDAC DEVICE0: Giving out device to module soc:arm64-cpu-erp controller cache: DEV soc:arm64-cpu-erp (INTERRUPT)
- [ 3.236918] ARM64 CPU ERP: Could not find <cci-irq> IRQ property. Proceeding anyway.
- [ 3.236924] ARM64 CPU ERP: SBE detection is disabled.
- [ 3.238351] Registered cp15_barrier emulation handler
- [ 3.238372] Registered setend emulation handler
- [ 3.238703] Loading compiled-in X.509 certificates
- [ 3.240461] Loaded X.509 cert 'Magrathea: Glacier signing key: ad311b9ee2ac9c34a4cadf1582e2441cc1e44c9d'
- [ 3.240491] registered taskstats version 1
- [ 3.241863] Key type encrypted registered
- [ 3.244202] fastrpc soc:qcom,adsprpc-mem: for adsp_rh segments only will be dumped.
- [ 3.247109] RNDIS_IPA module is loaded.
- [ 3.247862] file system registered
- [ 3.247916] mbim_init: initialize 1 instances
- [ 3.247978] mbim_init: Initialized 1 ports
- [ 3.249301] rndis_qc_init: initialize rndis QC instance
- [ 3.249504] Number of LUNs=8
- [ 3.249515] Mass Storage Function, version: 2009/09/11
- [ 3.249522] LUN: removable file: (no medium)
- [ 3.249537] Number of LUNs=1
- [ 3.249581] LUN: removable file: (no medium)
- [ 3.249585] Number of LUNs=1
- [ 3.249866] android_usb gadget: android_usb ready
- [ 3.251769] input: gpio-keys as /devices/soc/soc:gpio_keys/input/input5
- [ 3.252251] qcom,qpnp-rtc qpnp-rtc-8: setting system clock to 1970-01-01 01:17:22 UTC (4642)
- [ 3.257239] msm-core initialized without polling period
- [ 3.261827] parse_cpu_levels: idx 1 276
- [ 3.261845] calculate_residency: residency < 0 for LPM
- [ 3.262006] parse_cpu_levels: idx 1 286
- [ 3.262013] calculate_residency: residency < 0 for LPM
- [ 3.263994] msm-usb-ssphy-qmp 78000.ssphy: unable to set voltage for core_ldo
- [ 3.266418] qcom,qpnp-flash-led qpnp-flash-led-23: Unable to acquire pinctrl
- [ 3.267368] msm-dwc3 7000000.ssusb: DWC3 in low power mode
- [ 3.269620] rmnet_ipa started initialization
- [ 3.269628] IPA SSR support = True
- [ 3.269633] IPA ipa-loaduC = True
- [ 3.269638] IPA SG support = True
- [ 3.271884] ipa ipa_sps_irq_control_all:942 EP (5) not allocated.
- [ 3.271896] ipa ipa2_uc_state_check:301 uC is not loaded
- [ 3.272889] rmnet_ipa completed initialization
- [ 3.276443] qcom,cc-debug-8953 1874000.qcom,cc-debug: Registered Debug Mux successfully
- [ 3.288085] msm8952-asoc-wcd c051000.sound: default codec configured
- [ 3.291946] msm8952-asoc-wcd c051000.sound: ASoC: platform (null) not registered
- [ 3.291997] msm8952-asoc-wcd c051000.sound: snd_soc_register_card failed (-517)
- [ 3.293722] apc_mem_acc_corner: disabling
- [ 3.293733] gfx_mem_acc_corner: disabling
- [ 3.293774] adv_vreg: disabling
- [ 3.293780] vdd_vreg: disabling
- [ 3.293824] clock_late_init: Removing enables held for handed-off clocks
- [ 3.297949] ALSA device list:
- [ 3.297956] No soundcards found.
- [ 3.298024] Warning: unable to open an initial console.
- [ 3.344256] mmc1: new ultra high speed DDR50 SDHC card at address aaaa
- [ 3.344550] sdhci_msm_pm_qos_cpu_init (): voted for group #0 (mask=0xf) latency=2
- [ 3.344561] sdhci_msm_pm_qos_cpu_init (): voted for group #1 (mask=0xf0) latency=2
- [ 3.344687] mmcblk1: mmc1:aaaa SS16G 14.8 GiB
- [ 3.346708] Freeing unused kernel memory: 532K
- [ 3.346758] Freeing alternatives memory: 112K
- [ 3.347045] mmcblk1: p1
- [ 3.359387] msm8952-asoc-wcd c051000.sound: default codec configured
- [ 3.363537] msm8952-asoc-wcd c051000.sound: ASoC: platform (null) not registered
- [ 3.363585] msm8952-asoc-wcd c051000.sound: snd_soc_register_card failed (-517)
- [ 4.528477] FG: fg_batt_profile_init: wingtech init FG_DATA_BATT_ID =337120
- [ 5.674240] EXT3-fs (mmcblk0p49): error: couldn't mount because of unsupported optional features (40)
- [ 5.674582] EXT2-fs (mmcblk0p49): error: couldn't mount because of unsupported optional features (40)
- [ 5.677998] EXT4-fs (mmcblk0p49): mounted filesystem with ordered data mode. Opts: (null)
- [ 5.712484] enable_store: android_usb: already disabled
- [ 6.214224] dwc3 7000000.dwc3: ep0out: Unable to dequeue while in LPM
- [ 6.215979] rndis_function_bind_config: rndis_function_bind_config MAC: 00:00:00:00:00:00
- [ 6.216013] android_usb gadget: using random self ethernet address
- [ 6.216022] android_usb gadget: using random host ethernet address
- [ 6.216519] rndis0: MAC ca:1b:65:27:18:0e
- [ 6.216526] rndis0: HOST MAC 46:9c:80:8a:51:e9
- [ 6.251354] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready
- [ 6.520087] FG: fg_batt_profile_init: wingtech init FG_DATA_BATT_ID =337120
- [ 6.520200] of_batterydata_get_best_profile: WT batt_id = 337
- [ 6.520215] of_batterydata_get_best_profile: D1-qrd-sunwoda-4v4-3300mah found
- [ 6.530433] FG: fg_batt_profile_init: Battery SOC: 56, V: 3843361uV
- [ 6.530929] of_batterydata_get_best_profile: WT batt_id = 337
- [ 6.530939] of_batterydata_get_best_profile: D1-qrd-sunwoda-4v4-3300mah found
- [ 7.308279] dwc3 7000000.dwc3: ep0out: Unable to dequeue while in LPM
- [ 7.313284] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister rndis0
- [ 7.380169] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister rndis0
- [ 7.380853] rndis_function_bind_config: rndis_function_bind_config MAC: 46:9C:80:8A:51:E9
- [ 7.380885] android_usb gadget: using random self ethernet address
- [ 7.380891] android_usb gadget: using previous host ethernet address
- [ 7.381376] rndis0: MAC 7e:bd:2a:de:c7:e9
- [ 7.381384] rndis0: HOST MAC 46:9c:80:8a:51:e9
- [ 7.921224] dwc3 7000000.dwc3: ep0out: Unable to dequeue while in LPM
- [ 7.921782] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister rndis0
- [ 7.990154] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister rndis0
- [ 7.992022] rndis_function_bind_config: rndis_function_bind_config MAC: 46:9C:80:8A:51:E9
- [ 7.992052] android_usb gadget: using random self ethernet address
- [ 7.992058] android_usb gadget: using previous host ethernet address
- [ 7.992548] rndis0: MAC c6:fd:10:a3:68:02
- [ 7.992555] rndis0: HOST MAC 46:9c:80:8a:51:e9
- [ 8.205612] dwc3 7000000.dwc3: ep0out: Unable to dequeue while in LPM
- [ 8.206179] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister rndis0
- [ 8.260157] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister rndis0
- [ 8.260571] rndis_function_bind_config: rndis_function_bind_config MAC: 46:9C:80:8A:51:E9
- [ 8.260606] android_usb gadget: using random self ethernet address
- [ 8.260612] android_usb gadget: using previous host ethernet address
- [ 8.261021] rndis0: MAC 7a:9f:a3:e1:cd:b4
- [ 8.261027] rndis0: HOST MAC 46:9c:80:8a:51:e9
- [ 8.302696] dwc3 7000000.dwc3: ep0out: Unable to dequeue while in LPM
- [ 8.303232] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister rndis0
- [ 8.370444] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister rndis0
- [ 8.371781] rndis_function_bind_config: rndis_function_bind_config MAC: 46:9C:80:8A:51:E9
- [ 8.371815] android_usb gadget: using random self ethernet address
- [ 8.371822] android_usb gadget: using previous host ethernet address
- [ 8.372337] rndis0: MAC ae:d6:db:9b:36:9c
- [ 8.372343] rndis0: HOST MAC 46:9c:80:8a:51:e9
- [ 8.414521] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready
- [ 8.456435] random: init-debug urandom read with 62 bits of entropy available
- [ 9.507114] EXT4-fs (mmcblk0p49): re-mounted. Opts: (null)
- [ 17.978673] sps: BAM device 0x0000000007884000 is not registered yet.
- [ 17.978906] sps:BAM 0x0000000007884000 is registered.
- [ 17.979127] sps:BAM 0x0000000007884000 (va:0xffffff8002260000) enabled: ver:0x19, number of pipes:12
- [ 109.561213] random: nonblocking pool is initialized
- [ 157.700065] [FTS][Info][ESD]: In interrupt state, not check esd, return immediately!!
- [ 600.282771] msm-usb-ssphy-qmp 78000.ssphy: unable to set voltage for core_ldo
- [ 600.285973] msm-dwc3 7000000.ssusb: DWC3 exited from low power mode
- [ 600.285993] Client 28 passed invalid index: 2
- [ 600.286000] msm-dwc3 7000000.ssusb: Fail to vote for bus. error code: -6
- [ 600.585216] msm-dwc3 7000000.ssusb: Avail curr from USB = 3
- [ 600.665281] android_work: android_work: sent uevent USB_STATE=CONNECTED
- [ 600.669119] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
- [ 600.773228] android_work: android_work: sent uevent USB_STATE=CONNECTED
- [ 600.776654] android_usb gadget: high-speed config #1: 86000c8.android_usb
- [ 600.776799] msm-dwc3 7000000.ssusb: Avail curr from USB = 500
- [ 600.776918] IPv6: ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready
- [ 600.830056] android_work: android_work: sent uevent USB_STATE=CONFIGURED
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement