Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- # The following was performed on Debian Stretch
- # Adapted from:
- # https://ubuntuforums.org/showthread.php?t=1557180&p=9743605
- # http://blog.fkraiem.org/2013/03/13/linux-smart-card-authentication-pam/
- #
- # Note: A X.509 certificate stored on the card is required. See:
- # https://pastebin.com/dCypTy09
- # =====================================================================
- #
- # Install the PKCS11 module for PAM
- # Note: /etc/pam_pkcs11/cacerts and /etc/pam_pkcs11/crls are automatically
- # created here.
- # ---------------------------------------------------------------------
- $ sudo apt-get install libpam-pkcs11
- # Extract the pam_pkcs11.conf example file
- # ---------------------------------------------------------------------
- $ zcat /usr/share/doc/libpam-pkcs11/examples/pam_pkcs11.conf.example.gz | sudo tee /etc/pam_pkcs11/pam_pkcs11.conf
- # Edit /etc/pam_pkcs11/pam_pkcs11.conf and change the 'module' line
- # to the correct path of opensc-pkcs11.so.
- # ---------------------------------------------------------------------
- module = /usr/lib/x86_64-linux-gnu/opensc-pkcs11.so
- # Extract the certificate from the card and store as the PAM PKCS11 CA
- #
- # Note: certificate is self-signed and its own CA
- # ---------------------------------------------------------------------
- $ pkcs15-tool --read-certificate 707db33cfbd0712e0d5cfc4238fa85be44da990d | sudo tee /etc/pam_pkcs11/cacerts/jdoe-smartcard.pem
- # Rehash the certs stored in /etc/pam_pkcs11/cacerts
- # ---------------------------------------------------------------------
- $ sudo pkcs11_make_hash_link /etc/pam_pkcs11/cacerts
- # Basic Test with sudo
- # ---------------------------------------------------------------------
- #
- # Modify /etc/pam.d/sudo from:
- # vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
- %PAM-1.0
- @include common-auth
- @include common-account
- @include common-session-noninteractive
- # To:
- # vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
- #%PAM-1.0
- auth sufficient pam_pkcs11.so
- @include common-auth
- @include common-account
- @include common-session-noninteractive
- # Confirm that sudo works
- # ---------------------------------------------------------------------
- #
- # flush any cached passphrase
- $ sudo --reset-timestamp
- # gain root using PKCS11
- $ sudo --login
- Smartcard authentication starts
- Smart card found.
- Welcome OpenSC Card (John Doe)!
- Smart card PIN:
- verifying certificate
- Checking signature
- # Revert changes to /etc/pam.d/sudo
- # ---------------------------------------------------------------------
- # Remove the "auth sufficient pam_pkcs11.so" line
- # Edit /etc/pam.d/common-auth to apply smartcard auth globally
- #
- # Note: It is important to add pam_pkcs11.so *BEFORE* the comment
- # about the "Primary" block. Otherwise, it will be overwritten by
- # pam-auth-update(8)
- # ---------------------------------------------------------------------
- #
- # Original:
- # vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
- # /etc/pam.d/common-auth - authentication settings common to all services
- #
- # This file is included from other service-specific PAM config files,
- # and should contain a list of the authentication modules that define
- # the central authentication scheme for use on the system
- # (e.g., /etc/shadow, LDAP, Kerberos, etc.). The default is to use the
- # traditional Unix authentication mechanisms.
- #
- # As of pam 1.0.1-6, this file is managed by pam-auth-update by default.
- # To take advantage of this, it is recommended that you configure any
- # local modules either before or after the default block, and use
- # pam-auth-update to manage selection of other modules. See
- # pam-auth-update(8) for details.
- # here are the per-package modules (the "Primary" block)
- auth [success=1 default=ignore] pam_unix.so nullok_secure
- # here's the fallback if no module succeeds
- auth requisite pam_deny.so
- # prime the stack with a positive return value if there isn't one already;
- # this avoids us returning an error just because nothing sets a success code
- # since the modules above will each just jump around
- auth required pam_permit.so
- # and here are more per-package modules (the "Additional" block)
- # end of pam-auth-update config
- # Updated:
- # vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
- # /etc/pam.d/common-auth - authentication settings common to all services
- #
- # This file is included from other service-specific PAM config files,
- # and should contain a list of the authentication modules that define
- # the central authentication scheme for use on the system
- # (e.g., /etc/shadow, LDAP, Kerberos, etc.). The default is to use the
- # traditional Unix authentication mechanisms.
- #
- # As of pam 1.0.1-6, this file is managed by pam-auth-update by default.
- # To take advantage of this, it is recommended that you configure any
- # local modules either before or after the default block, and use
- # pam-auth-update to manage selection of other modules. See
- # pam-auth-update(8) for details.
- auth [success=2 default=ignore] pam_pkcs11.so
- # here are the per-package modules (the "Primary" block)
- auth [success=1 default=ignore] pam_unix.so nullok_secure
- # here's the fallback if no module succeeds
- auth requisite pam_deny.so
- # prime the stack with a positive return value if there isn't one already;
- # this avoids us returning an error just because nothing sets a success code
- # since the modules above will each just jump around
- auth required pam_permit.so
- # and here are more per-package modules (the "Additional" block)
- # end of pam-auth-update config
- # Disable password authentication for the current user
- # Note: Verify smartcard auth works before locking account!
- # ---------------------------------------------------------------------
- $ sudo passwd --lock `whoami`
- Smartcard authentication starts
- Smart card found.
- Welcome OpenSC Card (John Doe)!
- Smart card PIN:
- verifying certificate
- Checking signature
- passwd: password expiry information changed.
Advertisement