API tools faq
paste
WalterHWhite

SMART WD30EFRX

WalterHWhite
Dec 22nd, 2017
343
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.32 KB | None | 0 0
raw download clone embed print report
  1. root@oak:/home/hbarta# smartctl -a /dev/sdc
  2. smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-4-amd64] (local build)
  3. Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
  4.  
  5. === START OF INFORMATION SECTION ===
  6. Model Family: Western Digital Red
  7. Device Model: WDC WD30EFRX-68EUZN0
  8. Serial Number: WD-WMC000000000
  9. LU WWN Device Id: 5 0014ee 003456789
  10. Firmware Version: 80.00A80
  11. User Capacity: 3,000,592,982,016 bytes [3.00 TB]
  12. Sector Sizes: 512 bytes logical, 4096 bytes physical
  13. Rotation Rate: 5400 rpm
  14. Device is: In smartctl database [for details use: -P show]
  15. ATA Version is: ACS-2 (minor revision not indicated)
  16. SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
  17. Local Time is: Fri Dec 22 09:43:08 2017 CST
  18. SMART support is: Available - device has SMART capability.
  19. SMART support is: Enabled
  20.  
  21. === START OF READ SMART DATA SECTION ===
  22. SMART overall-health self-assessment test result: PASSED
  23.  
  24. General SMART Values:
  25. Offline data collection status: (0x00) Offline data collection activity
  26. was never started.
  27. Auto Offline Data Collection: Disabled.
  28. Self-test execution status: ( 121) The previous self-test completed having
  29. the read element of the test failed.
  30. Total time to complete Offline
  31. data collection: (41760) seconds.
  32. Offline data collection
  33. capabilities: (0x7b) SMART execute Offline immediate.
  34. Auto Offline data collection on/off support.
  35. Suspend Offline collection upon new
  36. command.
  37. Offline surface scan supported.
  38. Self-test supported.
  39. Conveyance Self-test supported.
  40. Selective Self-test supported.
  41. SMART capabilities: (0x0003) Saves SMART data before entering
  42. power-saving mode.
  43. Supports SMART auto save timer.
  44. Error logging capability: (0x01) Error logging supported.
  45. General Purpose Logging supported.
  46. Short self-test routine
  47. recommended polling time: ( 2) minutes.
  48. Extended self-test routine
  49. recommended polling time: ( 418) minutes.
  50. Conveyance self-test routine
  51. recommended polling time: ( 5) minutes.
  52. SCT capabilities: (0x703d) SCT Status supported.
  53. SCT Error Recovery Control supported.
  54. SCT Feature Control supported.
  55. SCT Data Table supported.
  56.  
  57. SMART Attributes Data Structure revision number: 16
  58. Vendor Specific SMART Attributes with Thresholds:
  59. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  60. 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 201
  61. 3 Spin_Up_Time 0x0027 196 178 021 Pre-fail Always - 5158
  62. 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 70
  63. 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
  64. 7 Seek_Error_Rate 0x002e 200 156 000 Old_age Always - 0
  65. 9 Power_On_Hours 0x0032 055 055 000 Old_age Always - 33491
  66. 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
  67. 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
  68. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 70
  69. 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 36
  70. 193 Load_Cycle_Count 0x0032 194 194 000 Old_age Always - 19264
  71. 194 Temperature_Celsius 0x0022 123 106 000 Old_age Always - 27
  72. 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
  73. 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 1
  74. 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
  75. 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
  76. 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
  77.  
  78. SMART Error Log Version: 1
  79. ATA Error Count: 251 (device log contains only the most recent five errors)
  80. CR = Command Register [HEX]
  81. FR = Features Register [HEX]
  82. SC = Sector Count Register [HEX]
  83. SN = Sector Number Register [HEX]
  84. CL = Cylinder Low Register [HEX]
  85. CH = Cylinder High Register [HEX]
  86. DH = Device/Head Register [HEX]
  87. DC = Device Command Register [HEX]
  88. ER = Error register [HEX]
  89. ST = Status register [HEX]
  90. Powered_Up_Time is measured from power on, and printed as
  91. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  92. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  93.  
  94. Error 251 occurred at disk power-on lifetime: 33237 hours (1384 days + 21 hours)
  95. When the command that caused the error occurred, the device was active or idle.
  96.  
  97. After command completion occurred, registers were:
  98. ER ST SC SN CL CH DH
  99. -- -- -- -- -- -- --
  100. 40 51 08 b8 37 41 ee Error: UNC 8 sectors at LBA = 0x0e4137b8 = 239155128
  101.  
  102. Commands leading to the command that caused the error were:
  103. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  104. -- -- -- -- -- -- -- -- ---------------- --------------------
  105. c8 00 08 b8 37 41 ee 00 6d+16:52:09.166 READ DMA
  106. c8 00 08 b0 37 41 ee 00 6d+16:52:09.166 READ DMA
  107. ca 00 08 b0 37 41 ee 00 6d+16:52:09.166 WRITE DMA
  108. ef 10 02 00 00 00 a0 00 6d+16:52:09.165 SET FEATURES [Enable SATA feature]
  109.  
  110. Error 250 occurred at disk power-on lifetime: 33237 hours (1384 days + 21 hours)
  111. When the command that caused the error occurred, the device was active or idle.
  112.  
  113. After command completion occurred, registers were:
  114. ER ST SC SN CL CH DH
  115. -- -- -- -- -- -- --
  116. 40 51 08 b0 37 41 ee Error: UNC 8 sectors at LBA = 0x0e4137b0 = 239155120
  117.  
  118. Commands leading to the command that caused the error were:
  119. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  120. -- -- -- -- -- -- -- -- ---------------- --------------------
  121. c8 00 08 b0 37 41 ee 00 6d+16:52:05.458 READ DMA
  122. c8 00 08 a8 37 41 ee 00 6d+16:52:05.458 READ DMA
  123. ca 00 08 a8 37 41 ee 00 6d+16:52:05.458 WRITE DMA
  124. ef 10 02 00 00 00 a0 00 6d+16:52:05.457 SET FEATURES [Enable SATA feature]
  125.  
  126. Error 249 occurred at disk power-on lifetime: 33237 hours (1384 days + 21 hours)
  127. When the command that caused the error occurred, the device was active or idle.
  128.  
  129. After command completion occurred, registers were:
  130. ER ST SC SN CL CH DH
  131. -- -- -- -- -- -- --
  132. 40 51 08 a8 37 41 ee Error: UNC 8 sectors at LBA = 0x0e4137a8 = 239155112
  133.  
  134. Commands leading to the command that caused the error were:
  135. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  136. -- -- -- -- -- -- -- -- ---------------- --------------------
  137. c8 00 08 a8 37 41 ee 00 6d+16:52:01.099 READ DMA
  138. c8 00 08 a0 37 41 ee 00 6d+16:52:01.099 READ DMA
  139. ca 00 08 a0 37 41 ee 00 6d+16:52:01.099 WRITE DMA
  140. ef 10 02 00 00 00 a0 00 6d+16:52:01.097 SET FEATURES [Enable SATA feature]
  141.  
  142. Error 248 occurred at disk power-on lifetime: 33237 hours (1384 days + 21 hours)
  143. When the command that caused the error occurred, the device was active or idle.
  144.  
  145. After command completion occurred, registers were:
  146. ER ST SC SN CL CH DH
  147. -- -- -- -- -- -- --
  148. 40 51 08 a0 37 41 ee Error: UNC 8 sectors at LBA = 0x0e4137a0 = 239155104
  149.  
  150. Commands leading to the command that caused the error were:
  151. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  152. -- -- -- -- -- -- -- -- ---------------- --------------------
  153. c8 00 08 a0 37 41 ee 00 6d+16:51:56.428 READ DMA
  154. c8 00 08 98 37 41 ee 00 6d+16:51:56.428 READ DMA
  155. ca 00 08 98 37 41 ee 00 6d+16:51:56.428 WRITE DMA
  156. ef 10 02 00 00 00 a0 00 6d+16:51:56.424 SET FEATURES [Enable SATA feature]
  157.  
  158. Error 247 occurred at disk power-on lifetime: 33237 hours (1384 days + 21 hours)
  159. When the command that caused the error occurred, the device was active or idle.
  160.  
  161. After command completion occurred, registers were:
  162. ER ST SC SN CL CH DH
  163. -- -- -- -- -- -- --
  164. 40 51 08 98 37 41 ee Error: UNC 8 sectors at LBA = 0x0e413798 = 239155096
  165.  
  166. Commands leading to the command that caused the error were:
  167. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  168. -- -- -- -- -- -- -- -- ---------------- --------------------
  169. c8 00 08 98 37 41 ee 00 6d+16:51:52.741 READ DMA
  170. c8 00 08 90 37 41 ee 00 6d+16:51:52.740 READ DMA
  171. ca 00 08 90 37 41 ee 00 6d+16:51:52.740 WRITE DMA
  172. ef 10 02 00 00 00 a0 00 6d+16:51:52.739 SET FEATURES [Enable SATA feature]
  173.  
  174. SMART Self-test log structure revision number 1
  175. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  176. # 1 Extended offline Completed: read failure 90% 33491 239126392
  177. # 2 Extended offline Completed without error 00% 30627 -
  178. # 3 Short offline Completed without error 00% 30619 -
  179.  
  180. SMART Selective self-test log data structure revision number 1
  181. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  182. 1 0 0 Not_testing
  183. 2 0 0 Not_testing
  184. 3 0 0 Not_testing
  185. 4 0 0 Not_testing
  186. 5 0 0 Not_testing
  187. Selective self-test flags (0x0):
  188. After scanning selected spans, do NOT read-scan remainder of disk.
  189. If Selective self-test is pending on power-up, resume after 0 minute delay.
  190.  
  191. root@oak:/home/hbarta#
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!