API tools faq
paste
Skybob22

Soft Reboot Bullseye

Skybob22
Jul 3rd, 2022
60
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 7.89 KB | None | 0 0
raw download clone embed print report
  1. DDR Version 1.25 20210517
  2. In
  3. soft reset
  4. SRX
  5. channel 0
  6. CS = 0
  7. MR0=0x18
  8. MR4=0x1
  9. MR5=0x1
  10. MR8=0x8
  11. MR12=0x72
  12. MR14=0x72
  13. MR18=0x0
  14. MR19=0x0
  15. MR24=0x8
  16. MR25=0x0
  17. CS = 1
  18. MR0=0x18
  19. MR4=0x1
  20. MR5=0x1
  21. MR8=0x8
  22. MR12=0x72
  23. MR14=0x72
  24. MR18=0x0
  25. MR19=0x0
  26. MR24=0x8
  27. MR25=0x0
  28. channel 1
  29. CS = 0
  30. MR0=0x18
  31. MR4=0x1
  32. MR5=0x1
  33. MR8=0x8
  34. MR12=0x72
  35. MR14=0x72
  36. MR18=0x0
  37. MR19=0x0
  38. MR24=0x8
  39. MR25=0x0
  40. CS = 1
  41. MR0=0x18
  42. MR4=0x1
  43. MR5=0x1
  44. MR8=0x8
  45. MR12=0x72
  46. MR14=0x72
  47. MR18=0x0
  48. MR19=0x0
  49. MR24=0x8
  50. MR25=0x0
  51. channel 0 training pass!
  52. channel 1 training pass!
  53. change freq to 416MHz 0,1
  54. Channel 0: LPDDR4,416MHz
  55. Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
  56. Channel 1: LPDDR4,416MHz
  57. Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
  58. 256B stride
  59. channel 0
  60. CS = 0
  61. MR0=0x18
  62. MR4=0x1
  63. MR5=0x1
  64. MR8=0x8
  65. MR12=0x72
  66. MR14=0x72
  67. MR18=0x0
  68. MR19=0x0
  69. MR24=0x8
  70. MR25=0x0
  71. CS = 1
  72. MR0=0x18
  73. MR4=0x1
  74. MR5=0x1
  75. MR8=0x8
  76. MR12=0x72
  77. MR14=0x72
  78. MR18=0x0
  79. MR19=0x0
  80. MR24=0x8
  81. MR25=0x0
  82. channel 1
  83. CS = 0
  84. MR0=0x18
  85. MR4=0x1
  86. MR5=0x1
  87. MR8=0x8
  88. MR12=0x72
  89. MR14=0x72
  90. MR18=0x0
  91. MR19=0x0
  92. MR24=0x8
  93. MR25=0x0
  94. CS = 1
  95. MR0=0x18
  96. MR4=0x1
  97. MR5=0x1
  98. MR8=0x8
  99. MR12=0x72
  100. MR14=0x72
  101. MR18=0x0
  102. MR19=0x0
  103. MR24=0x8
  104. MR25=0x0
  105. channel 0 training pass!
  106. channel 1 training pass!
  107. channel 0, cs 0, advanced training done
  108. channel 0, cs 1, advanced training done
  109. channel 1, cs 0, advanced training done
  110. channel 1, cs 1, advanced training done
  111. change freq to 856MHz 1,0
  112. ch 0 ddrconfig = 0x101, ddrsize = 0x2020
  113. ch 1 ddrconfig = 0x101, ddrsize = 0x2020
  114. pmugrf_os_reg[2] = 0x3AA1FAA1, stride = 0xD
  115. ddr_set_rate to 328MHZ
  116. ddr_set_rate to 666MHZ
  117. ddr_set_rate to 928MHZ
  118. channel 0, cs 0, advanced training done
  119. channel 0, cs 1, advanced training done
  120. channel 1, cs 0, advanced training done
  121. channel 1, cs 1, advanced training done
  122. ddr_set_rate to 416MHZ, ctl_index 0
  123. ddr_set_rate to 856MHZ, ctl_index 1
  124. support 416 856 328 666 928 MHz, current 856MHz
  125. OUT
  126. Boot1 Release Time: May 29 2020 17:36:36, version: 1.26
  127. CPUId = 0x0
  128. ChipType = 0x10, 438
  129. mmc: ERROR: SDHCI ERR:cmd:0x102,stat:0x18000
  130. mmc: ERROR: Card did not respond to voltage select!
  131. emmc reinit
  132. mmc: ERROR: SDHCI ERR:cmd:0x102,stat:0x18000
  133. mmc: ERROR: Card did not respond to voltage select!
  134. emmc reinit
  135. mmc: ERROR: SDHCI ERR:cmd:0x102,stat:0x18000
  136. mmc: ERROR: Card did not respond to voltage select!
  137. SdmmcInit=2 1
  138. mmc0:cmd5,20
  139. SdmmcInit=0 0
  140. BootCapSize=0
  141. UserCapSize=30436MB
  142. FwPartOffset=2000 , 0
  143. StorageInit ok = 57993
  144. SecureMode = 0
  145. SecureInit read PBA: 0x4
  146. SecureInit read PBA: 0x404
  147. SecureInit read PBA: 0x804
  148. SecureInit read PBA: 0xc04
  149. SecureInit read PBA: 0x1004
  150. SecureInit read PBA: 0x1404
  151. SecureInit read PBA: 0x1804
  152. SecureInit read PBA: 0x1c04
  153. SecureInit ret = 0, SecureMode = 0
  154. atags_set_bootdev: ret:(0)
  155. GPT 0x3335db8 signature is wrong
  156. recovery gpt...
  157. GPT 0x3335db8 signature is wrong
  158. recovery gpt fail!
  159. Trust Addr:0x4000, 0x58334c42
  160. No find bl30.bin
  161. No find bl32.bin
  162. Load uboot, ReadLba = 2000
  163. Load OK, addr=0x200000, size=0xc15e8
  164. RunBL31 0x40000 @ 170412 us
  165. NOTICE: BL31: v1.3(release):845ee93
  166. NOTICE: BL31: Built : 15:51:11, Jul 22 2020
  167. NOTICE: BL31: Rockchip release version: v1.1
  168. INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
  169. INFO: Using opteed sec cpu_context!
  170. INFO: boot cpu mask: 0
  171. INFO: plat_rockchip_pmu_init(1196): pd status 3e
  172. INFO: BL31: Initializing runtime services
  173. WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
  174. ERROR: Error initializing runtime service opteed_fast
  175. INFO: BL31: Preparing for EL3 exit to normal world
  176. INFO: Entry point address = 0x200000
  177. INFO: SPSR = 0x3c9
  178.  
  179.  
  180. U-Boot 2022.04-armbian (Jun 22 2022 - 07:18:50 +0000)
  181.  
  182. SoC: Rockchip rk3399
  183. Reset cause: RST
  184. Model: FriendlyElec NanoPi R4S
  185. DRAM: 3.9 GiB
  186. PMIC: RK808
  187. Core: 262 devices, 23 uclasses, devicetree: separate
  188. MMC: mmc@fe320000: 1
  189. Loading Environment from MMC... *** Warning - bad CRC, using default environment
  190.  
  191. rk3399_vop vop@ff8f0000: failed to get ahb reset (ret=-524)
  192. rk3399_vop vop@ff8f0000: failed to get ahb reset (ret=-524)
  193. In: serial
  194. Out: serial
  195. Err: serial
  196. Net: eth0: ethernet@fe300000
  197. Hit any key to stop autoboot: 0
  198. starting USB...
  199. Bus usb@fe380000: USB EHCI 1.00
  200. Bus usb@fe3c0000: USB EHCI 1.00
  201. Bus usb@fe800000: Register 2000140 NbrPorts 2
  202. Starting the controller
  203. USB XHCI 1.10
  204. Bus usb@fe900000: Register 2000140 NbrPorts 2
  205. Starting the controller
  206. USB XHCI 1.10
  207. scanning bus usb@fe380000 for devices... 1 USB Device(s) found
  208. scanning bus usb@fe3c0000 for devices... 1 USB Device(s) found
  209. scanning bus usb@fe800000 for devices... 1 USB Device(s) found
  210. scanning bus usb@fe900000 for devices... 1 USB Device(s) found
  211. scanning usb for storage devices... 0 Storage Device(s) found
  212.  
  213. Device 0: unknown device
  214. switch to partitions #0, OK
  215. mmc1 is current device
  216. Scanning mmc 1:1...
  217. Found U-Boot script /boot/boot.scr
  218. 3185 bytes read in 5 ms (622.1 KiB/s)
  219. ## Executing script at 00500000
  220. Boot script loaded from mmc 1
  221. 226 bytes read in 4 ms (54.7 KiB/s)
  222. 12502520 bytes read in 532 ms (22.4 MiB/s)
  223. 30540288 bytes read in 1293 ms (22.5 MiB/s)
  224. 77471 bytes read in 11 ms (6.7 MiB/s)
  225. 2698 bytes read in 7 ms (376 KiB/s)
  226. Applying kernel provided DT fixup script (rockchip-fixup.scr)
  227. ## Executing script at 09000000
  228. Moving Image from 0x2080000 to 0x2200000, end=3fc0000
  229. ## Loading init Ramdisk from Legacy Image at 06000000 ...
  230. Image Name: uInitrd
  231. Image Type: AArch64 Linux RAMDisk Image (gzip compressed)
  232. Data Size: 12502456 Bytes = 11.9 MiB
  233. Load Address: 00000000
  234. Entry Point: 00000000
  235. Verifying Checksum ... OK
  236. ## Flattened Device Tree blob at 01f00000
  237. Booting using the fdt blob at 0x1f00000
  238. Host not halted after 16000 microseconds.
  239. Host not halted after 16000 microseconds.
  240. Loading Ramdisk to f1338000, end f1f245b8 ... OK
  241. Loading Device Tree to 00000000f12bc000, end 00000000f1337fff ... OK
  242.  
  243. Starting kernel ...
  244.  
  245. Loading, please wait...
  246. Starting version 247.3-7
  247. Begin: Loading essential drivers ... done.
  248. Begin: Running /scripts/init-premount ... done.
  249. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
  250. Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems
  251. done.
  252. Begin: Waiting for root file system ... Begin: Running /scripts/local-block ... done.
  253. Begin: Running /scripts/local-block ... done.
  254. Begin: Running /scripts/local-block ... done.
  255. Begin: Running /scripts/local-block ... done.
  256. Begin: Running /scripts/local-block ... done.
  257. Begin: Running /scripts/local-block ... done.
  258. Begin: Running /scripts/local-block ... done.
  259. Begin: Running /scripts/local-block ... done.
  260. Begin: Running /scripts/local-block ... done.
  261. Begin: Running /scripts/local-block ... done.
  262. Begin: Running /scripts/local-block ... done.
  263. Begin: Running /scripts/local-block ... done.
  264. Begin: Running /scripts/local-block ... done.
  265. Begin: Running /scripts/local-block ... done.
  266. Begin: Running /scripts/local-block ... done.
  267. Begin: Running /scripts/local-block ... done.
  268. Begin: Running /scripts/local-block ... done.
  269. Begin: Running /scripts/local-block ... done.
  270. Begin: Running /scripts/local-block ... done.
  271. Begin: Running /scripts/local-block ... done.
  272. Begin: Running /scripts/local-block ... done.
  273. Begin: Running /scripts/local-block ... done.
  274. Begin: Running /scripts/local-block ... done.
  275. Begin: Running /scripts/local-block ... done.
  276. Begin: Running /scripts/local-block ... done.
  277. Begin: Running /scripts/local-block ... done.
  278. Begin: Running /scripts/local-block ... done.
  279. Begin: Running /scripts/local-block ... done.
  280. done.
  281. Gave up waiting for root file system device. Common problems:
  282. - Boot args (cat /proc/cmdline)
  283. - Check rootdelay= (did the system wait long enough?)
  284. - Missing modules (cat /proc/modules; ls /dev)
  285. ALERT! UUID=xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx does not exist. Dropping to a shell!
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!