Pastebin
API
tools
faq
paste
Login
Sign up
Please fix the following errors:
New Paste
Syntax Highlighting
1001.486] X.Org X Server 1.16.4 Release Date: 2014-12-20 [ 1001.486] X Protocol Version 11, Revision 0 [ 1001.486] Build Operating System: Linux 4.0.5-gentoo x86_64 Gentoo [ 1001.486] Current Operating System: Linux NiTr0 4.0.5-gentoo #3 SMP Thu Aug 20 00:27:49 EEST 2015 x86_64 [ 1001.486] Kernel command line: root=/dev/sda5 [ 1001.486] Build Date: 19 August 2015 08:14:26PM [ 1001.486] [ 1001.486] Current version of pixman: 0.32.6 [ 1001.486] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 1001.486] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 1001.486] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug 21 20:32:34 2015 [ 1001.487] (==) Using config file: "/etc/X11/xorg.conf" [ 1001.487] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 1001.487] (==) ServerLayout "X.org Configured" [ 1001.487] (**) |-->Screen "Screen0" (0) [ 1001.487] (**) | |-->Monitor "Monitor0" [ 1001.487] (**) | |-->Device "Card0" [ 1001.487] (**) |-->Input Device "Mouse0" [ 1001.487] (**) |-->Input Device "Keyboard0" [ 1001.487] (==) Automatically adding devices [ 1001.487] (==) Automatically enabling devices [ 1001.487] (==) Automatically adding GPU devices [ 1001.487] (**) FontPath set to: /usr/share/fonts/misc/, /usr/share/fonts/TTF/, /usr/share/fonts/OTF/, /usr/share/fonts/Type1/, /usr/share/fonts/100dpi/, /usr/share/fonts/75dpi/, /usr/share/fonts/misc/, /usr/share/fonts/TTF/, /usr/share/fonts/OTF/, /usr/share/fonts/Type1/, /usr/share/fonts/100dpi/, /usr/share/fonts/75dpi/ [ 1001.487] (**) ModulePath set to "/usr/lib64/xorg/modules" [ 1001.487] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled. [ 1001.487] (WW) Disabling Mouse0 [ 1001.487] (WW) Disabling Keyboard0 [ 1001.487] (II) Loader magic: 0x806c80 [ 1001.488] (II) Module ABI versions: [ 1001.488] X.Org ANSI C Emulation: 0.4 [ 1001.488] X.Org Video Driver: 18.0 [ 1001.488] X.Org XInput driver : 21.0 [ 1001.488] X.Org Server Extension : 8.0 [ 1001.490] (--) PCI:*(0:3:0:0) 102b:0522:8086:0101 rev 2, Mem @ 0xb0000000/16777216, 0xb1800000/16384, 0xb1000000/8388608, BIOS @ 0x????????/65536 [ 1001.490] (II) "glx" will be loaded. This was enabled by default and also specified in the config file. [ 1001.490] (II) LoadModule: "glx" [ 1001.491] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so [ 1001.492] (II) Module glx: vendor="X.Org Foundation" [ 1001.492] compiled for 1.16.4, module version = 1.0.0 [ 1001.492] ABI class: X.Org Server Extension, version 8.0 [ 1001.492] (==) AIGLX enabled [ 1001.492] (II) LoadModule: "mga" [ 1001.493] (II) Loading /usr/lib64/xorg/modules/drivers/mga_drv.so [ 1001.493] (II) Module mga: vendor="X.Org Foundation" [ 1001.493] compiled for 1.16.4, module version = 1.6.3 [ 1001.493] Module class: X.Org Video Driver [ 1001.493] ABI class: X.Org Video Driver, version 18.0 [ 1001.493] (II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w, mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI, mgag200 SE A PCI, mgag200 SE B PCI, mgag200 EV Maxim, mgag200 ER SH7757, mgag200 eW Nuvoton, mgag200eH, mgag400, mgag550 [ 1001.493] (++) using VT number 7 [ 1001.504] (II) Loading sub module "vgahw" [ 1001.504] (II) LoadModule: "vgahw" [ 1001.504] (II) Loading /usr/lib64/xorg/modules/libvgahw.so [ 1001.504] (II) Module vgahw: vendor="X.Org Foundation" [ 1001.504] compiled for 1.16.4, module version = 0.1.0 [ 1001.504] ABI class: X.Org Video Driver, version 18.0 [ 1001.504] (--) MGA(0): Chipset: "mgag200 SE A PCI" [ 1001.504] (II) MGA(0): HW cursor is not supported with video redirection onG200 server chips. If you don't intend to use video redirection enable with Option "HWCursor" "On" [ 1001.504] xf86TokenToOptinfo: table is NULL [ 1001.504] xf86TokenToOptinfo: table is NULL [ 1001.504] (==) MGA(0): Using SW cursor [ 1001.504] (--) MGA(0): Linear framebuffer at 0xB0000000 [ 1001.504] (--) MGA(0): MMIO registers at 0xB1800000 [ 1001.504] (--) MGA(0): Pseudo-DMA transfer window at 0xB1000000 [ 1001.504] (II) MGA(0): MAPPED Framebuffer B0000000 400000 to 7FF655A5C000. [ 1001.504] (II) MGA(0): UNMAPPING framebuffer 0x7FF655A5C000, 0x400000. [ 1001.505] (II) MGA(0): MAPPED Framebuffer B0000000 1000000 to 7FF654E5C000. [ 1001.569] (II) MGA(0): UNMAPPING framebuffer 0x7FF654E5C000, 0x1000000. [ 1001.569] (==) MGA(0): Depth 24, (--) framebuffer bpp 32 [ 1001.569] (==) MGA(0): RGB weight 888 [ 1001.569] (II) MGA(0): Disabling MTRR support. [ 1001.569] (==) MGA(0): Using AGP 1x mode [ 1001.569] (==) MGA(0): Using XAA acceleration [ 1001.570] (--) MGA(0): Video BIOS info block at offset 0x07AE0 [ 1001.570] (==) MGA(0): VideoRAM: 8128 kByte [ 1001.570] (II) Loading sub module "ddc" [ 1001.570] (II) LoadModule: "ddc" [ 1001.570] (II) Module "ddc" already built-in [ 1001.570] (II) Loading sub module "i2c" [ 1001.570] (II) LoadModule: "i2c" [ 1001.570] (II) Module "i2c" already built-in [ 1001.570] (II) MGA(0): MAPPED Framebuffer B0000000 7f0000 to 7FF65566C000. [ 1001.570] (II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0 [ 1001.940] (II) MGA(0): I2C bus "DDC P1" initialized. [ 1001.940] (II) MGA(0): I2C device "DDC P1:ddc2" registered at address 0xA0. [ 1001.948] (--) MGA(0): No DDC signal [ 1001.948] (II) Loading sub module "vbe" [ 1001.948] (II) LoadModule: "vbe" [ 1001.948] (II) Loading /usr/lib64/xorg/modules/libvbe.so [ 1001.948] (II) Module vbe: vendor="X.Org Foundation" [ 1001.948] compiled for 1.16.4, module version = 1.1.0 [ 1001.948] ABI class: X.Org Video Driver, version 18.0 [ 1001.948] (II) Loading sub module "int10" [ 1001.948] (II) LoadModule: "int10" [ 1001.948] (II) Loading /usr/lib64/xorg/modules/libint10.so [ 1001.948] (II) Module int10: vendor="X.Org Foundation" [ 1001.948] compiled for 1.16.4, module version = 1.0.0 [ 1001.948] ABI class: X.Org Video Driver, version 18.0 [ 1001.948] (II) MGA(0): initializing int10 [ 1001.951] (II) MGA(0): Primary V_BIOS segment is: 0xc000 [ 1001.951] (II) MGA(0): VESA BIOS detected [ 1001.951] (II) MGA(0): VESA VBE Version 3.0 [ 1001.951] (II) MGA(0): VESA VBE Total Mem: 8128 kB [ 1001.951] (II) MGA(0): VESA VBE OEM: Matrox Graphics Inc. [ 1001.951] (II) MGA(0): VESA VBE OEM Software Rev: 3.8 [ 1001.951] (II) MGA(0): VESA VBE OEM Vendor: Matrox [ 1001.951] (II) MGA(0): VESA VBE OEM Product: MGA-G200 [ 1001.951] (II) MGA(0): VESA VBE OEM Product Rev: 00 [ 1002.023] (II) MGA(0): VESA VBE DDC supported [ 1002.023] (II) MGA(0): VESA VBE DDC Level none [ 1002.023] (II) MGA(0): VESA VBE DDC transfer in appr. 0 sec. [ 1002.088] (II) MGA(0): VESA VBE DDC read failed [ 1002.351] (II) MGA(0): UNMAPPING framebuffer 0x7FF65566C000, 0x7F0000. [ 1002.351] (==) MGA(0): Using gamma correction (1.0, 1.0, 1.0) [ 1002.351] (==) MGA(0): Min pixel clock is 17 MHz [ 1002.351] (--) MGA(0): Max pixel clock is 230 MHz [ 1002.351] (II) MGA(0): Monitor0: Using hsync range of 31.50-48.00 kHz [ 1002.351] (II) MGA(0): Monitor0: Using vrefresh range of 56.00-75.00 Hz [ 1002.351] (II) MGA(0): Clock range: 17.75 to 230.00 MHz [ 1002.351] (II) MGA(0): Not using default mode "640x350" (vrefresh out of range) [ 1002.351] (II) MGA(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan) [ 1002.351] (II) MGA(0): Not using default mode "640x400" (vrefresh out of range) [ 1002.351] (II) MGA(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan) [ 1002.351] (II) MGA(0): Not using default mode "720x400" (vrefresh out of range) [ 1002.351] (II) MGA(0): Not using default mode "360x200" (vrefresh out of range) [ 1002.351] (II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) [ 1002.351] (II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) [ 1002.351] (II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) [ 1002.351] (II) MGA(0): Not using default mode "640x480" (vrefresh out of range) [ 1002.351] (II) MGA(0): Not using default mode "320x240" (vrefresh out of range) [ 1002.351] (II) MGA(0): Not using default mode "800x600" (hsync out of range) [ 1002.351] (II) MGA(0): Not using default mode "400x300" (hsync out of range) [ 1002.351] (II) MGA(0): Not using default mode "1024x768i" (vrefresh out of range) [ 1002.351] (II) MGA(0): Not using default mode "512x384i" (vrefresh out of range) [ 1002.351] (II) MGA(0): Not using default mode "1024x768" (hsync out of range) [ 1002.351] (II) MGA(0): Not using default mode "512x384" (hsync out of range) [ 1002.351] (II) MGA(0): Not using default mode "1024x768" (hsync out of range) [ 1002.351] (II) MGA(0): Not using default mode "512x384" (hsync out of range) [ 1002.351] (II) MGA(0): Not using default mode "1024x768" (mode requires too much memory bandwidth) [ 1002.351] (II) MGA(0): Not using default mode "512x384" (hsync out of range) [ 1002.351] (II) MGA(0): Not using default mode "1152x864" (mode requires too much memory bandwidth) [ 1002.351] (II) MGA(0): Not using default mode "576x432" (hsync out of range) [ 1002.351] (II) MGA(0): Not using default mode "1280x960" (mode requires too much memory bandwidth) [ 1002.351] (II) MGA(0): Not using default mode "640x480" (hsync out of range) [ 1002.351] (II) MGA(0): Not using default mode "1280x960" (mode requires too much memory bandwidth) [ 1002.351] (II) MGA(0): Not using default mode "640x480" (hsync out of range) [ 1002.351] (II) MGA(0): Not using default mode "1280x1024" (mode requires too much memory bandwidth) [ 1002.351] (II) MGA(0): Not using default mode "640x512" (hsync out of range) [ 1002.351] (II) MGA(0): Not using default mode "1280x1024" (mode requires too much memory bandwidth) [ 1002.351] (II) MGA(0): Not using default mode "640x512" (hsync out of range) [ 1002.351] (II) MGA(0): Not using default mode "1280x1024" (mode requires too much memory bandwidth) [ 1002.351] (II) MGA(0): Not using default mode "640x512" (hsync out of range) [ 1002.351] (II) MGA(0): Not using default mode "1600x1200" (mode requires too much memory bandwidth) [ 1002.351] (II) MGA(0): Not using default mode "800x600" (hsync out of range) [ 1002.351] (II) MGA(0): Not using default mode "1600x1200" (mode requires too much memory bandwidth) [ 1002.351] (II) MGA(0): Not using default mode "800x600" (hsync out of range) [ 1002.351] (II) MGA(0): Not using default mode "1600x1200" (mode requires too much memory bandwidth) [ 1002.351] (II) MGA(0): Not using default mode "800x600" (mode requires too much memory bandwidth) [ 1002.351] (II) MGA(0): Not using default mode "1600x1200" (mode requires too much memory bandwidth) [ 1002.351] (II) MGA(0): Not using default mode "800x600" (mode requires too much memory bandwidth) [ 1002.351] (II) MGA(0): Not using default mode "1600x1200" (mode requires too much memory bandwidth) [ 1002.351] (II) MGA(0): Not using default mode "800x600" (mode requires too much memory bandwidth) [ 1002.351] (II) MGA(0): Not using default mode "1792x1344" (insufficient memory for mode) [ 1002.351] (II) MGA(0): Not using default mode "896x672" (mode requires too much memory bandwidth) [ 1002.351] (II) MGA(0): Not using default mode "1792x1344" (insufficient memory for mode) [ 1002.351] (II) MGA(0): Not using default mode "896x672" (mode requires too much memory bandwidth) [ 1002.352] (II) MGA(0): Not using default mode "1856x1392" (insufficient memory for mode) [ 1002.352] (II) MGA(0): Not using default mode "928x696" (mode requires too much memory bandwidth) [ 1002.352] (II) MGA(0): Not using default mode "1856x1392" (insufficient memory for mode) [ 1002.352] (II) MGA(0): Not using default mode "928x696" (mode requires too much memory bandwidth) [ 1002.352] (II) MGA(0): Not using default mode "1920x1440" (insufficient memory for mode) [ 1002.352] (II) MGA(0): Not using default mode "960x720" (mode requires too much memory bandwidth) [ 1002.352] (II) MGA(0): Not using default mode "1920x1440" (insufficient memory for mode) [ 1002.352] (II) MGA(0): Not using default mode "960x720" (mode requires too much memory bandwidth) [ 1002.352] (II) MGA(0): Not using default mode "832x624" (hsync out of range) [ 1002.352] (II) MGA(0): Not using default mode "416x312" (hsync out of range) [ 1002.352] (II) MGA(0): Not using default mode "1400x1050" (mode requires too much memory bandwidth) [ 1002.352] (II) MGA(0): Not using default mode "700x525" (hsync out of range) [ 1002.352] (II) MGA(0): Not using default mode "1400x1050" (mode requires too much memory bandwidth) [ 1002.352] (II) MGA(0): Not using default mode "700x525" (hsync out of range) [ 1002.352] (II) MGA(0): Not using default mode "1920x1440" (insufficient memory for mode) [ 1002.352] (II) MGA(0): Not using default mode "960x720" (mode requires too much memory bandwidth) [ 1002.352] (II) MGA(0): Not using default mode "2048x1536" (insufficient memory for mode) [ 1002.352] (II) MGA(0): Not using default mode "1024x768" (mode requires too much memory bandwidth) [ 1002.352] (II) MGA(0): Not using default mode "2048x1536" (insufficient memory for mode) [ 1002.352] (II) MGA(0): Not using default mode "1024x768" (mode requires too much memory bandwidth) [ 1002.352] (II) MGA(0): Not using default mode "2048x1536" (insufficient memory for mode) [ 1002.352] (II) MGA(0): Not using default mode "1024x768" (mode requires too much memory bandwidth) [ 1002.352] (II) MGA(0): Not using mode "1280x1024" (no mode of this name) [ 1002.352] (--) MGA(0): Has SDRAM [ 1002.352] (--) MGA(0): Virtual size is 1024x768 (pitch 1024) [ 1002.352] (**) MGA(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz [ 1002.352] (II) MGA(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz zd) [ 1002.352] (**) MGA(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz [ 1002.352] (II) MGA(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz d) [ 1002.352] (**) MGA(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz [ 1002.352] (II) MGA(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz d) [ 1002.352] (**) MGA(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz [ 1002.352] (II) MGA(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d) [ 1002.352] (**) MGA(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz [ 1002.352] (II) MGA(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d) [ 1002.352] (**) MGA(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz [ 1002.352] (II) MGA(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz d) [ 1002.352] (**) MGA(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz [ 1002.352] (II) MGA(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz d) [ 1002.352] (**) MGA(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz [ 1002.352] (II) MGA(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d) [ 1002.352] (**) MGA(0): Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D) [ 1002.352] (II) MGA(0): Modeline "512x384"x60.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d) [ 1002.352] (**) MGA(0): Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D) [ 1002.352] (II) MGA(0): Modeline "400x300"x75.1 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync (46.9 kHz d) [ 1002.352] (**) MGA(0): Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D) [ 1002.352] (II) MGA(0): Modeline "400x300"x72.2 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync (48.1 kHz d) [ 1002.352] (**) MGA(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D) [ 1002.352] (II) MGA(0): Modeline "400x300"x60.3 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d) [ 1002.352] (**) MGA(0): Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D) [ 1002.352] (II) MGA(0): Modeline "400x300"x56.3 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d) [ 1002.352] (==) MGA(0): DPI set to (96, 96) [ 1002.352] (II) MGA(0): YDstOrg is set to 0 [ 1002.352] (II) Loading sub module "fb" [ 1002.352] (II) LoadModule: "fb" [ 1002.352] (II) Loading /usr/lib64/xorg/modules/libfb.so [ 1002.353] (II) Module fb: vendor="X.Org Foundation" [ 1002.353] compiled for 1.16.4, module version = 1.0.0 [ 1002.353] ABI class: X.Org ANSI C Emulation, version 0.4 [ 1002.353] (--) Depth 24 pixmap format is 32 bpp [ 1002.353] (II) MGA(0): MAPPED Framebuffer B0000000 1000000 to 7FF653A42000. [ 1002.353] (II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0 [ 1002.891] (--) MGA(0): 64 DWORD fifo [ 1002.924] (II) MGA(0): Clock == 65000 [ 1002.924] (II) MGA(0): BitsPerPixel == 32 [ 1002.924] (II) MGA(0): HiPriLvl == 03 [ 1002.938] (==) MGA(0): Default visual is TrueColor [ 1002.938] (WW) MGA(0): Not supported by hardware, not initializing the DRI [ 1002.938] (II) MGA(0): Using -512 lines for offscreen memory. [ 1002.938] (==) MGA(0): Backing store enabled [ 1002.938] (==) MGA(0): Silken mouse enabled [ 1002.938] (==) MGA(0): DPMS enabled [ 1002.938] (WW) MGA(0): Direct rendering disabled [ 1002.938] (WW) MGA(0): Option "MTRR" is not used [ 1002.938] (==) RandR enabled [ 1002.949] (II) AIGLX: Screen 0 is not DRI2 capable [ 1002.949] (EE) AIGLX: reverting to software rendering [ 1002.968] (II) AIGLX: Loaded and initialized swrast [ 1002.968] (II) GLX: Initialized DRISWRAST GL provider for screen 0 [ 1003.306] (II) config/udev: Adding input device Power Button (/dev/input/event5) [ 1003.306] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 1003.306] (**) Power Button: Applying InputClass "system-keyboard" [ 1003.306] (II) LoadModule: "evdev" [ 1003.306] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 1003.306] (II) Module evdev: vendor="X.Org Foundation" [ 1003.306] compiled for 1.16.4, module version = 2.9.1 [ 1003.306] Module class: X.Org XInput Driver [ 1003.306] ABI class: X.Org XInput driver, version 21.0 [ 1003.306] (II) Using input driver 'evdev' for 'Power Button' [ 1003.306] (**) Power Button: always reports core events [ 1003.306] (**) evdev: Power Button: Device: "/dev/input/event5" [ 1003.306] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 1003.307] (--) evdev: Power Button: Found keys [ 1003.307] (II) evdev: Power Button: Configuring as keyboard [ 1003.307] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5" [ 1003.307] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 1003.307] (**) Option "xkb_rules" "evdev" [ 1003.307] (**) Option "xkb_model" "pc105" [ 1003.307] (**) Option "xkb_layout" "us,ru,ua" [ 1003.307] (**) Option "xkb_variant" ",winkeys,winkeys" [ 1003.307] (**) Option "xkb_options" "grp:shifts_toggle,grp_led:scroll" [ 1003.356] (II) config/udev: Adding input device Sleep Button (/dev/input/event4) [ 1003.356] (**) Sleep Button: Applying InputClass "evdev keyboard catchall" [ 1003.356] (**) Sleep Button: Applying InputClass "system-keyboard" [ 1003.356] (II) Using input driver 'evdev' for 'Sleep Button' [ 1003.356] (**) Sleep Button: always reports core events [ 1003.356] (**) evdev: Sleep Button: Device: "/dev/input/event4" [ 1003.356] (--) evdev: Sleep Button: Vendor 0 Product 0x3 [ 1003.356] (--) evdev: Sleep Button: Found keys [ 1003.356] (II) evdev: Sleep Button: Configuring as keyboard [ 1003.356] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4/event4" [ 1003.356] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 7) [ 1003.356] (**) Option "xkb_rules" "evdev" [ 1003.356] (**) Option "xkb_model" "pc105" [ 1003.356] (**) Option "xkb_layout" "us,ru,ua" [ 1003.357] (**) Option "xkb_variant" ",winkeys,winkeys" [ 1003.357] (**) Option "xkb_options" "grp:shifts_toggle,grp_led:scroll" [ 1003.358] (II) config/udev: Adding input device American Megatrends Inc. Virtual Keyboard and Mouse (/dev/input/event0) [ 1003.358] (**) American Megatrends Inc. Virtual Keyboard and Mouse: Applying InputClass "evdev keyboard catchall" [ 1003.358] (**) American Megatrends Inc. Virtual Keyboard and Mouse: Applying InputClass "system-keyboard" [ 1003.358] (II) Using input driver 'evdev' for 'American Megatrends Inc. Virtual Keyboard and Mouse' [ 1003.358] (**) American Megatrends Inc. Virtual Keyboard and Mouse: always reports core events [ 1003.358] (**) evdev: American Megatrends Inc. Virtual Keyboard and Mouse: Device: "/dev/input/event0" [ 1003.358] (--) evdev: American Megatrends Inc. Virtual Keyboard and Mouse: Vendor 0x46b Product 0xff10 [ 1003.358] (--) evdev: American Megatrends Inc. Virtual Keyboard and Mouse: Found keys [ 1003.358] (II) evdev: American Megatrends Inc. Virtual Keyboard and Mouse: Configuring as keyboard [ 1003.358] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:046B:FF10.0001/input/input0/event0" [ 1003.358] (II) XINPUT: Adding extended input device "American Megatrends Inc. Virtual Keyboard and Mouse" (type: KEYBOARD, id 8) [ 1003.358] (**) Option "xkb_rules" "evdev" [ 1003.358] (**) Option "xkb_model" "pc105" [ 1003.358] (**) Option "xkb_layout" "us,ru,ua" [ 1003.358] (**) Option "xkb_variant" ",winkeys,winkeys" [ 1003.358] (**) Option "xkb_options" "grp:shifts_toggle,grp_led:scroll" [ 1003.359] (II) config/udev: Adding input device American Megatrends Inc. Virtual Keyboard and Mouse (/dev/input/event1) [ 1003.359] (**) American Megatrends Inc. Virtual Keyboard and Mouse: Applying InputClass "evdev pointer catchall" [ 1003.359] (II) Using input driver 'evdev' for 'American Megatrends Inc. Virtual Keyboard and Mouse' [ 1003.359] (**) American Megatrends Inc. Virtual Keyboard and Mouse: always reports core events [ 1003.359] (**) evdev: American Megatrends Inc. Virtual Keyboard and Mouse: Device: "/dev/input/event1" [ 1003.419] (EE) evdev: American Megatrends Inc. Virtual Keyboard and Mouse: Unable to open evdev device "/dev/input/event1". [ 1003.419] (EE) PreInit returned 2 for "American Megatrends Inc. Virtual Keyboard and Mouse" [ 1003.419] (II) UnloadModule: "evdev" [ 1003.419] (II) config/udev: Adding input device American Megatrends Inc. Virtual Keyboard and Mouse (/dev/input/mouse0) [ 1003.419] (II) No input driver specified, ignoring this device. [ 1003.419] (II) This device may have been added with another device file. [ 1003.420] (II) config/udev: Adding input device Barcode Reader (/dev/input/event2) [ 1003.420] (**) Barcode Reader : Applying InputClass "evdev keyboard catchall" [ 1003.420] (**) Barcode Reader : Applying InputClass "system-keyboard" [ 1003.420] (II) Using input driver 'evdev' for 'Barcode Reader ' [ 1003.420] (**) Barcode Reader : always reports core events [ 1003.420] (**) evdev: Barcode Reader : Device: "/dev/input/event2" [ 1003.420] (--) evdev: Barcode Reader : Vendor 0x13ba Product 0x18 [ 1003.420] (--) evdev: Barcode Reader : Found keys [ 1003.420] (II) evdev: Barcode Reader : Configuring as keyboard [ 1003.420] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:13BA:0018.0003/input/input2/event2" [ 1003.420] (II) XINPUT: Adding extended input device "Barcode Reader " (type: KEYBOARD, id 9) [ 1003.420] (**) Option "xkb_rules" "evdev" [ 1003.420] (**) Option "xkb_model" "pc105" [ 1003.420] (**) Option "xkb_layout" "us,ru,ua" [ 1003.420] (**) Option "xkb_variant" ",winkeys,winkeys" [ 1003.420] (**) Option "xkb_options" "grp:shifts_toggle,grp_led:scroll" [ 1003.421] (II) config/udev: Adding input device Barcode Reader (/dev/input/event3) [ 1003.421] (**) Barcode Reader : Applying InputClass "evdev pointer catchall" [ 1003.422] (**) Barcode Reader : Applying InputClass "evdev keyboard catchall" [ 1003.422] (**) Barcode Reader : Applying InputClass "system-keyboard" [ 1003.422] (II) Using input driver 'evdev' for 'Barcode Reader ' [ 1003.422] (**) Barcode Reader : always reports core events [ 1003.422] (**) evdev: Barcode Reader : Device: "/dev/input/event3" [ 1003.422] (--) evdev: Barcode Reader : Vendor 0x13ba Product 0x18 [ 1003.422] (--) evdev: Barcode Reader : Found 9 mouse buttons [ 1003.422] (--) evdev: Barcode Reader : Found scroll wheel(s) [ 1003.422] (--) evdev: Barcode Reader : Found relative axes [ 1003.422] (--) evdev: Barcode Reader : Found x and y relative axes [ 1003.422] (--) evdev: Barcode Reader : Found absolute axes [ 1003.422] (II) evdev: Barcode Reader : Forcing absolute x/y axes to exist. [ 1003.422] (--) evdev: Barcode Reader : Found keys [ 1003.422] (II) evdev: Barcode Reader : Configuring as mouse [ 1003.422] (II) evdev: Barcode Reader : Configuring as keyboard [ 1003.422] (II) evdev: Barcode Reader : Adding scrollwheel support [ 1003.422] (**) evdev: Barcode Reader : YAxisMapping: buttons 4 and 5 [ 1003.422] (**) evdev: Barcode Reader : EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 1003.422] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/0003:13BA:0018.0004/input/input3/event3" [ 1003.422] (II) XINPUT: Adding extended input device "Barcode Reader " (type: KEYBOARD, id 10) [ 1003.422] (**) Option "xkb_rules" "evdev" [ 1003.422] (**) Option "xkb_model" "pc105" [ 1003.422] (**) Option "xkb_layout" "us,ru,ua" [ 1003.422] (**) Option "xkb_variant" ",winkeys,winkeys" [ 1003.422] (**) Option "xkb_options" "grp:shifts_toggle,grp_led:scroll" [ 1003.422] (II) evdev: Barcode Reader : initialized for relative axes. [ 1003.422] (WW) evdev: Barcode Reader : ignoring absolute axes. [ 1003.423] (**) Barcode Reader : (accel) keeping acceleration scheme 1 [ 1003.423] (**) Barcode Reader : (accel) acceleration profile 0 [ 1003.423] (**) Barcode Reader : (accel) acceleration factor: 2.000 [ 1003.423] (**) Barcode Reader : (accel) acceleration threshold: 4 [ 1003.423] (II) config/udev: Adding input device Barcode Reader (/dev/input/mouse1) [ 1003.423] (**) Barcode Reader : Applying InputClass "system-keyboard" [ 1003.423] (II) No input driver specified, ignoring this device. [ 1003.423] (II) This device may have been added with another device file.
Optional Paste Settings
Category:
None
Cryptocurrency
Cybersecurity
Fixit
Food
Gaming
Haiku
Help
History
Housing
Jokes
Legal
Money
Movies
Music
Pets
Photo
Science
Software
Source Code
Spirit
Sports
Travel
TV
Writing
Tags:
Syntax Highlighting:
None
Bash
C
C#
C++
CSS
HTML
JSON
Java
JavaScript
Lua
Markdown (PRO members only)
Objective C
PHP
Perl
Python
Ruby
Swift
4CS
6502 ACME Cross Assembler
6502 Kick Assembler
6502 TASM/64TASS
ABAP
AIMMS
ALGOL 68
APT Sources
ARM
ASM (NASM)
ASP
ActionScript
ActionScript 3
Ada
Apache Log
AppleScript
Arduino
Asymptote
AutoIt
Autohotkey
Avisynth
Awk
BASCOM AVR
BNF
BOO
Bash
Basic4GL
Batch
BibTeX
Blitz Basic
Blitz3D
BlitzMax
BrainFuck
C
C (WinAPI)
C Intermediate Language
C for Macs
C#
C++
C++ (WinAPI)
C++ (with Qt extensions)
C: Loadrunner
CAD DCL
CAD Lisp
CFDG
CMake
COBOL
CSS
Ceylon
ChaiScript
Chapel
Clojure
Clone C
Clone C++
CoffeeScript
ColdFusion
Cuesheet
D
DCL
DCPU-16
DCS
DIV
DOT
Dart
Delphi
Delphi Prism (Oxygene)
Diff
E
ECMAScript
EPC
Easytrieve
Eiffel
Email
Erlang
Euphoria
F#
FO Language
Falcon
Filemaker
Formula One
Fortran
FreeBasic
FreeSWITCH
GAMBAS
GDB
GDScript
Game Maker
Genero
Genie
GetText
Go
Godot GLSL
Groovy
GwBasic
HQ9 Plus
HTML
HTML 5
Haskell
Haxe
HicEst
IDL
INI file
INTERCAL
IO
ISPF Panel Definition
Icon
Inno Script
J
JCL
JSON
Java
Java 5
JavaScript
Julia
KSP (Kontakt Script)
KiXtart
Kotlin
LDIF
LLVM
LOL Code
LScript
Latex
Liberty BASIC
Linden Scripting
Lisp
Loco Basic
Logtalk
Lotus Formulas
Lotus Script
Lua
M68000 Assembler
MIX Assembler
MK-61/52
MPASM
MXML
MagikSF
Make
MapBasic
Markdown (PRO members only)
MatLab
Mercury
MetaPost
Modula 2
Modula 3
Motorola 68000 HiSoft Dev
MySQL
Nagios
NetRexx
Nginx
Nim
NullSoft Installer
OCaml
OCaml Brief
Oberon 2
Objeck Programming Langua
Objective C
Octave
Open Object Rexx
OpenBSD PACKET FILTER
OpenGL Shading
Openoffice BASIC
Oracle 11
Oracle 8
Oz
PARI/GP
PCRE
PHP
PHP Brief
PL/I
PL/SQL
POV-Ray
ParaSail
Pascal
Pawn
Per
Perl
Perl 6
Phix
Pic 16
Pike
Pixel Bender
PostScript
PostgreSQL
PowerBuilder
PowerShell
ProFTPd
Progress
Prolog
Properties
ProvideX
Puppet
PureBasic
PyCon
Python
Python for S60
QBasic
QML
R
RBScript
REBOL
REG
RPM Spec
Racket
Rails
Rexx
Robots
Roff Manpage
Ruby
Ruby Gnuplot
Rust
SAS
SCL
SPARK
SPARQL
SQF
SQL
SSH Config
Scala
Scheme
Scilab
SdlBasic
Smalltalk
Smarty
StandardML
StoneScript
SuperCollider
Swift
SystemVerilog
T-SQL
TCL
TeXgraph
Tera Term
TypeScript
TypoScript
UPC
Unicon
UnrealScript
Urbi
VB.NET
VBScript
VHDL
VIM
Vala
Vedit
VeriLog
Visual Pro Log
VisualBasic
VisualFoxPro
WHOIS
WhiteSpace
Winbatch
XBasic
XML
XPP
Xojo
Xorg Config
YAML
YARA
Z80 Assembler
ZXBasic
autoconf
jQuery
mIRC
newLISP
q/kdb+
thinBasic
Paste Expiration:
Never
Burn after read
10 Minutes
1 Hour
1 Day
1 Week
2 Weeks
1 Month
6 Months
1 Year
Paste Exposure:
Public
Unlisted
Private
Folder:
(members only)
Password
NEW
Enabled
Disabled
Burn after read
NEW
Paste Name / Title:
Create New Paste
Hello
Guest
Sign Up
or
Login
Sign in with Facebook
Sign in with Twitter
Sign in with Google
You are currently not logged in, this means you can not edit or delete anything you paste.
Sign Up
or
Login
Public Pastes
Die 7 wichtigsten Aktionen diese Woche
7 hours ago | 4.17 KB
Untitled
8 hours ago | 13.34 KB
Untitled
9 hours ago | 13.59 KB
VNC SCRIPT 2/2: autoinput.vbs
VBScript | 18 hours ago | 0.23 KB
VNC SCRIPT 1/2: vncauto.bat
Batch | 18 hours ago | 0.72 KB
videoscheomedia
XML | 21 hours ago | 1.00 KB
Untitled
1 day ago | 14.91 KB
autconnectVNC.bat
Batch | 1 day ago | 0.93 KB
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the
Cookies Policy
.
OK, I Understand
Not a member of Pastebin yet?
Sign Up
, it unlocks many cool features!
