Create a new version of paste:

// Unexplained crashes? Try changing mat_queue_mode to `-1'.
// ----------------------------------------------------------------------------
// Chris' maxframes config, designed to get you a large performance boost
// v2.016 | 25 January 2013 | fakkelbrigade.eu/chris/configs/
// ----------------------------------------------------------------------------
// Problems or questions? Contact me at #christf2 on QuakeNet.
// ----------------------------------------------------------------------------
// Launch options:
// IMPORTANT: Remove -dxlevel 81 from the launch options after the first launch!
//
// Fullscreen: -dxlevel 81 -full -w WIDTH -h HEIGHT -console -novid -useforcedmparms -noforcemaccel -noforcemspd
// Windowed:   -dxlevel 81 -sw -w WIDTH -h HEIGHT -console -noborder -novid -useforcedmparms -noforcemaccel -noforcemspd
// ----------------------------------------------------------------------------

// ----------------------------------------------------------------------------
// FPS cap
// ----------------------------------------------------------------------------
// The primary benefit of an FPS cap is to make the FPS more stable, other than
// that, it doesn't do a lot. A moderate, consistent framerate is much more
// desirable than a variable but sometimes high framerate. A common
// misconception is that if any more frames are generated than your monitor can
// display, they are useless. This is wrong -- frames are used for much more
// than mere display, and affect the way the game feels well past your
// refresh rate.
//
// This FPS cap should *always* be set to a value higher than `cl_cmdrate' in
// any case, or the discrepancy between clientside frame generation and frames
// to be sent to the server will no doubt cause you many a headache, especially
// when it comes down to hit registration. Other than that, I recommend
// for everyone to use the value `132' (2*66), as long as you can generally
// keep that value stable without regular drops.
// ----------------------------------------------------------------------------
cl_showfps 1 // Show unsmoothed FPS meter
//fps_max 132 // Commented due to 2011-09-02 update causing jittering when fps is capped for some
fps_max 0

// ----------------------------------------------------------------------------
// Net settings
// ----------------------------------------------------------------------------
// Whilst net settings perhaps aren't an integral part of an FPS config, they
// are a fact of life in competitive TF2, and as such, they are included here.
//
// A common question I am asked -- what defines whether a good connection is
// good or bad? Mostly personal preference. If you're not willing to make the
// choice, try both and see which is better for you.
//
// Generally, meeting both of the following conditions would classify it as a
// good connection:
//
// - Ping of <80 to the average server you join
// - Generally no/negligible choke/loss (can be checked with `net_graph')
//
// There's some pretty good documentation on this here:
// http://developer.valvesoftware.com/wiki/Source_Multiplayer_Networking
//
// Uncomment (remove the `//' from) one of the groups if you want to use them.
// ----------------------------------------------------------------------------

// Good connection
//cl_cmdrate 66
//cl_interp 0
//cl_interp_ratio 1
//cl_lagcompensation 1
//cl_pred_optimize 2
//cl_smooth 0
//cl_smoothtime 0.01
//cl_updaterate 66
//rate 60000

// Bad connection
//cl_cmdrate 40
//cl_interp 0
//cl_interp_ratio 2
//cl_lagcompensation 1
//cl_pred_optimize 2
//cl_smooth 0
//cl_smoothtime 0.01
//cl_updaterate 40
//rate 35000

// ----------------------------------------------------------------------------
// Sprays
// ----------------------------------------------------------------------------
// Bear in mind that these are disabled on war servers due to `sv_pure 2'
// anyway, so if you play competitive TF2, this won't help you.
// ----------------------------------------------------------------------------

// Disable sprays
cl_playerspraydisable 1
r_spray_lifetime 0

// Enable sprays -- uncomment this section if you want these settings
//cl_playerspraydisable 0
//r_spray_lifetime 2

// ----------------------------------------------------------------------------
// Shadows
// ----------------------------------------------------------------------------

// Disable shadows
mat_shadowstate 0
r_shadowmaxrendered 0
r_shadowrendertotexture 0
r_shadows 0

// Enable shadows -- uncomment this section if you want these settings
//mat_shadowstate 1
//r_shadowmaxrendered 11
//r_shadowrendertotexture 1 // Non-blobby shadows. Sometimes turned on by
                            // competitive TF2 players to see opponents standing
                            // near the other side of a wall. You may see some
                            // performance loss from setting this to `1'.
//r_shadows 1

// ----------------------------------------------------------------------------
// Facial features
// ----------------------------------------------------------------------------

// Disable facial features
r_eyes 0
r_flex 0
r_lod 2
r_rootlod 2
r_teeth 0

// Enable facial features -- uncomment this section if you want these settings
//r_eyes 1
//r_flex 1
//r_lod 1 // Needs to be set to 1, otherwise they will still be disabled.
//r_rootlod 1
//r_teeth 1

// ----------------------------------------------------------------------------
// Ragdolls
// ----------------------------------------------------------------------------
// You will have reduced performance on deaths which produce ragdolls.
// ----------------------------------------------------------------------------

// Disable ragdolls
cl_ragdoll_fade_time 0
cl_ragdoll_forcefade 1
cl_ragdoll_physics_enable 0
g_ragdoll_fadespeed 0
g_ragdoll_lvfadespeed 0
ragdoll_sleepaftertime 0

// Enable ragdolls -- uncomment this section if you want these settings
//cl_ragdoll_fade_time 15
//cl_ragdoll_forcefade 0
//cl_ragdoll_physics_enable 1
//g_ragdoll_fadespeed 600
//g_ragdoll_lvfadespeed 100
//ragdoll_sleepaftertime "5.0f"

// ----------------------------------------------------------------------------
// Gibs
// ----------------------------------------------------------------------------
// You will have reduced performance on deaths which produce gibs.
// ----------------------------------------------------------------------------

// Disable gibs
cl_phys_props_enable 0
cl_phys_props_max 0
props_break_max_pieces 0
r_propsmaxdist 1
violence_agibs 0
violence_hgibs 0

// Enable gibs -- uncomment this section if you want these settings
//cl_phys_props_enable 1
//cl_phys_props_max 128
//props_break_max_pieces -1
//r_propsmaxdist 1000
//violence_agibs 1
//violence_hgibs 1

// ----------------------------------------------------------------------------
// Graphical
// ----------------------------------------------------------------------------
// Now we come to the main brunt of the config. You probably don't want to mess
// with this.
// ----------------------------------------------------------------------------
cl_detaildist 0
cl_detailfade 0
cl_drawmonitors 0
cl_ejectbrass 0
cl_jiggle_bone_framerate_cutoff 0 // Turns off jigglebones
cl_new_impact_effects 0
cl_show_splashes 0
func_break_max_pieces 0
glow_outline_effect_enable 0 // Cart glow effect.
lod_transitiondist 0
mat_antialias 0
mat_bumpmap 0 // Controls bumpmapping. Setting this to 0 on dx9 will cause
              // a strange `shine' effect to appear on all players.
mat_colcorrection_disableentities 1
mat_colorcorrection 0
mat_disable_bloom 1
mat_disable_fancy_blending 1
mat_disable_lightwarp 1
mat_envmapsize 8
mat_envmaptgasize 8
mat_filterlightmaps 0
mat_filtertextures 0
mat_forceaniso 1
mat_hdr_level 0
mat_max_worldmesh_vertices 512
mat_monitorgamma 2.0 // Controls brightness, try 1.8 to make it brighter or 2.2
                     // to get it darker. Only works in fullscreen.
mat_motion_blur_enabled 0
mat_parallaxmap 0
mat_picmip 2 // Higher = more mipmapping. Without `sv_cheats 1', you're looking
             // at a range from -1 to 2, -1 being the best quality, 2 being the
             // worst.
mat_reducefillrate 1
mat_reduceparticles 1
mat_specular 0 // Controls specularity. Setting this to 0 will make ubers
               // non-shiny, and will remove some specular effects from in-game
               // entities which support it. Setting this to 1 on dx8 will
               // result in some strange `fire' textures replacing their
               // appropriate counterparts, especially on medals, and certain
               // hats.
mat_trilinear 0
mat_viewportscale 1 // Almost no performance gain from viewport upscaling.
mat_viewportupscale 1
mat_wateroverlaysize 1
mp_decals 1 // `9' is a good value to still see the spread pattern from a
            // scattergun without any real performance loss.
r_3dsky 0
r_ambientboost 0
r_ambientfactor 0
r_ambientmin 0
r_avglight 0
r_cheapwaterend 1
r_cheapwaterstart 1
r_decals 1
r_decalstaticprops 0
r_decal_cullsize 15
r_drawdetailprops 0
r_drawmodeldecals 0
r_drawflecks 0
r_dynamic 0
r_flashlightdepthtexture 0
r_forcewaterleaf 1
r_lightaverage 0
r_maxnewsamples 2
r_maxsampledist 1
r_propsmaxdist 0
r_renderoverlayfragment 0
r_staticprop_lod 4
r_waterdrawreflection 0
r_waterdrawrefraction 1
r_waterforceexpensive 0
r_waterforcereflectentities 0
rope_averagelight 0
rope_collide 0
rope_rendersolid 0
rope_shake 0
rope_smooth 0
rope_subdiv 0
rope_wind_dist 0
tf_particles_disable_weather 1 // Disable weather effects on maps supporting
                               // it, for example, setting this to `1'
                               // disables rain effects on *_sawmill.
tracer_extra 0
violence_ablood 1 // Setting ablood/hblood to 1 actually improves perf usually
violence_hblood 1

// ----------------------------------------------------------------------------
// Misc
// ----------------------------------------------------------------------------
in_usekeyboardsampletime 0
mat_clipz 1 // FX card users should set this to 0
mat_forcehardwaresync 0
mat_levelflush 1
//m_rawinput 1 // Turn on raw mouse input. Commented out by default due to
               // silly incompatibility with the Xfire overlay. You should use
               // it if you can!
mat_vsync 0 // Turn off vsync to avoid nasty I/O latency.
r_fastzreject -1 // Values >1 enable a fast Z rejection algorithm, to be
                 // performed on the GPU (as opposed to on the CPU). The
                 // value `-1' autodetects hardware support for this
                 // feature, which is safer than forcing it.

// ----------------------------------------------------------------------------
// Sound
// ----------------------------------------------------------------------------
// I'd be hesitant to say that you would see a great deal of performance
// improvement from lowering the sound quality, but in my experience as a
// competitive TF2 player, lowering the sound quality makes determination of
// directionality and distance that much easier. You may see a small FPS gain
// with these settings, or you may not, either way will likely have a
// negligible effect on performance.
// ----------------------------------------------------------------------------
dsp_enhance_stereo 0
dsp_slow_cpu 1
snd_async_fullyasync 1 // Having the sound run fully asynchronous has been
                       // helpful in the past, as it seems to (for whatever
                       // reason) reduce the number of TDRs experienced during
                       // gameplay. There's some pretty good information on
                       // TDRs (nerds only) here:
                       // http://forums.nvidia.com/index.php?showtopic=65161
snd_pitchquality 0
snd_spatialize_roundrobin 1

// ----------------------------------------------------------------------------
// Threading
// ----------------------------------------------------------------------------
mat_queue_mode 2 // mat_queue mode is another frequently asked about cvar, it
                 // defines the threading method to be used by the material
                 // system. It has been unstable to use in the past, but
                 // nowadays it's generally okay.
                 //
                 // Here are the possible values:
                 //     -2 legacy default
                 //     -1 default
                 //      0 synchronous single thread
                 //      1 queued single thread
                 //      2 queued multithreaded
                 //
                 // If you have problems with the value `2', try setting it to
                 // `-1'.
                 //
                 // As an aside, there are quite a few bugs in the demo system
                 // that occur when mat_queue_mode is set to a value that is
                 // not `-1'. If you intend to do work with the demo system,
                 // maybe you should change this.

cl_threaded_bone_setup 0
cl_threaded_client_leaf_system 0
r_queued_decals 0
r_queued_ropes 1
r_queued_post_processing 0
r_threaded_client_shadow_manager 1
r_threaded_particles 1
r_threaded_renderables 1

// ----------------------------------------------------------------------------
// Misc
// ----------------------------------------------------------------------------
cl_forcepreload 1 // Force preloading

// ----------------------------------------------------------------------------
// Print to console
// ----------------------------------------------------------------------------
echo "-------------------------------------------------------"
echo "            Chris' maxframes config loaded.            "
echo "-------------------------------------------------------"
echo "Please direct all comments/queries/whatnot to"
echo "#christf2 on QuakeNet."