Pastebin
API
tools
faq
paste
Login
Sign up
Please fix the following errors:
New Paste
Syntax Highlighting
[ 0.000000] Booting Linux on physical CPU 0x200 [ 0.000000] Linux version 5.0.0-rc5-xc1mla (root@archl-c1b) (gcc version 8.2.1 20181127 (GCC)) #6 SMP Tue Feb 5 18:31:31 UTC 2019 [ 0.000000] CPU: ARMv7 Processor [410fc051] revision 1 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Hardkernel ODROID-C1 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x3c000000 [ 0.000000] On node 0 totalpages: 261632 [ 0.000000] DMA zone: 1532 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196096 pages, LIFO batch:63 [ 0.000000] HighMem zone: 65536 pages, LIFO batch:15 [ 0.000000] random: get_random_bytes called from start_kernel+0xa0/0x458 with crng_init=0 [ 0.000000] percpu: Embedded 17 pages/cpu @(ptrval) s40332 r8192 d21108 u69632 [ 0.000000] pcpu-alloc: s40332 r8192 d21108 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260100 [ 0.000000] Kernel command line: console=ttyAML0,115200 root=/dev/mmcblk0p1 rootwait rw fsck.fix=yes net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 934088K/1046528K available (12288K kernel code, 1752K rwdata, 5084K rodata, 2048K init, 395K bss, 46904K reserved, 65536K cma-reserved, 196608K highmem) [ 0.000000] Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0x(ptrval) - 0x(ptrval) (13280 kB) .init : 0x(ptrval) - 0x(ptrval) (2048 kB) .data : 0x(ptrval) - 0x(ptrval) (1753 kB) .bss : 0x(ptrval) - 0x(ptrval) ( 396 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] irq_meson_gpio: 119 to 8 gpio interrupt mux initialized [ 0.000000] L2C: DT/platform modifies aux control register: 0x02060000 -> 0x02460000 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 ID prefetch enabled, offset 1 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 8 ways, 512 kB [ 0.000000] L2C-310: CACHE_ID 0x4100a0c9, AUX_CTRL 0x36460000 [ 0.000000] failed to get HHI regmap - Trying obsolete regs [ 0.000013] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000030] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000065] Switching to timer-based delay loop, resolution 1000ns [ 0.001361] Console: colour dummy device 80x30 [ 0.001402] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000) [ 0.001413] pid_max: default: 32768 minimum: 301 [ 0.001550] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001563] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002019] CPU: Testing write buffer coherency: ok [ 0.002286] CPU0: thread -1, cpu 0, socket 2, mpidr 80000200 [ 0.002895] Setting up static identity map for 0x300000 - 0x3000a0 [ 0.003479] rcu: Hierarchical SRCU implementation. [ 0.008331] EFI services will not be available. [ 0.008578] smp: Bringing up secondary CPUs ... [ 0.009114] CPU1: thread -1, cpu 1, socket 2, mpidr 80000201 [ 0.009717] CPU2: thread -1, cpu 2, socket 2, mpidr 80000202 [ 0.010274] CPU3: thread -1, cpu 3, socket 2, mpidr 80000203 [ 0.010356] smp: Brought up 1 node, 4 CPUs [ 0.010373] SMP: Total of 4 processors activated (8.00 BogoMIPS). [ 0.010378] CPU: All CPU(s) started in SVC mode. [ 0.011212] devtmpfs: initialized [ 0.014120] VFP support v0.3: implementor 41 architecture 2 part 30 variant 5 rev 1 [ 0.014306] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.014326] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.017048] pinctrl core: initialized pinctrl subsystem [ 0.018176] DMI not present or invalid. [ 0.018524] NET: Registered protocol family 16 [ 0.020171] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.021836] cpuidle: using governor menu [ 0.022098] No ATAGs? [ 0.022204] hw-breakpoint: found 2 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.022213] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.023809] Serial: AMBA PL011 UART driver [ 0.045627] AT91: Could not find identification node [ 0.046137] VCC1V8: supplied by P5V0 [ 0.046386] VCC3V3: supplied by P5V0 [ 0.046615] DDR_VDDC: supplied by P5V0 [ 0.046834] VDD_RTC: supplied by VCC3V3 [ 0.048696] vgaarb: loaded [ 0.049285] SCSI subsystem initialized [ 0.049478] libata version 3.00 loaded. [ 0.049668] usbcore: registered new interface driver usbfs [ 0.049720] usbcore: registered new interface driver hub [ 0.049777] usbcore: registered new device driver usb [ 0.050849] pps_core: LinuxPPS API ver. 1 registered [ 0.050858] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.050876] PTP clock support registered [ 0.050999] EDAC MC: Ver: 3.0.0 [ 0.053006] clocksource: Switched to clocksource timer [ 0.404778] NET: Registered protocol family 2 [ 0.405476] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.405503] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.405573] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.405678] TCP: Hash tables configured (established 8192 bind 8192) [ 0.405784] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.405825] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.405993] NET: Registered protocol family 1 [ 0.406401] RPC: Registered named UNIX socket transport module. [ 0.406411] RPC: Registered udp transport module. [ 0.406417] RPC: Registered tcp transport module. [ 0.406421] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.406430] PCI: CLS 0 bytes, default 64 [ 0.406769] Trying to unpack rootfs image as initramfs... [ 0.467904] Freeing initrd memory: 14928K [ 0.468756] hw perfevents: enabled with armv7_cortex_a5 PMU driver, 3 counters available [ 0.469929] Initialise system trusted keyrings [ 0.470103] workingset: timestamp_bits=30 max_order=18 bucket_order=0 [ 0.476427] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.477003] NFS: Registering the id_resolver key type [ 0.477030] Key type id_resolver registered [ 0.477035] Key type id_legacy registered [ 0.477067] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.523919] Key type asymmetric registered [ 0.523931] Asymmetric key parser 'x509' registered [ 0.523987] bounce: pool size: 64 pages [ 0.524032] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.524040] io scheduler mq-deadline registered [ 0.524045] io scheduler kyber registered [ 0.529619] GPIO line 1953 (usb-hub-reset) hogged as output/high [ 0.540463] soc soc0: Amlogic Meson8b (S805) RevA (1b - 0:B72) detected [ 0.584701] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.587157] SuperH (H)SCI(F) driver initialized [ 0.587759] c81004c0.serial: ttyAML0 at MMIO 0xc81004c0 (irq = 25, base_baud = 9960937) is a meson_uart [ 1.288524] printk: console [ttyAML0] enabled [ 1.293521] msm_serial: driver initialized [ 1.297035] STMicroelectronics ASC driver initialized [ 1.302562] STM32 USART driver initialized [ 1.317922] brd: module loaded [ 1.324372] loop: module loaded [ 1.330803] libphy: Fixed MDIO Bus: probed [ 1.331808] CAN device driver interface [ 1.333758] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 1.339426] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.344578] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.350497] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.357415] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.364831] meson8b-dwmac c9410000.ethernet: PTP uses main clock [ 1.369427] meson8b-dwmac c9410000.ethernet: User ID: 0x10, Synopsys ID: 0x37 [ 1.376104] meson8b-dwmac c9410000.ethernet: DWMAC1000 [ 1.381281] meson8b-dwmac c9410000.ethernet: DMA HW capability register supported [ 1.388764] meson8b-dwmac c9410000.ethernet: RX Checksum Offload Engine supported [ 1.396227] meson8b-dwmac c9410000.ethernet: COE Type 2 [ 1.401427] meson8b-dwmac c9410000.ethernet: TX Checksum insertion supported [ 1.408472] meson8b-dwmac c9410000.ethernet: Wake-Up On Lan supported [ 1.414923] meson8b-dwmac c9410000.ethernet: Normal descriptors [ 1.420792] meson8b-dwmac c9410000.ethernet: Ring mode enabled [ 1.426624] meson8b-dwmac c9410000.ethernet: Enable RX Mitigation via HW Watchdog Timer [ 1.513020] libphy: stmmac: probed [ 1.519407] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.521215] usbcore: registered new interface driver pegasus [ 1.526900] usbcore: registered new interface driver asix [ 1.532223] usbcore: registered new interface driver ax88179_178a [ 1.538326] usbcore: registered new interface driver cdc_ether [ 1.544146] usbcore: registered new interface driver smsc75xx [ 1.549858] usbcore: registered new interface driver smsc95xx [ 1.555597] usbcore: registered new interface driver net1080 [ 1.561224] usbcore: registered new interface driver cdc_subset [ 1.567144] usbcore: registered new interface driver zaurus [ 1.572709] usbcore: registered new interface driver cdc_ncm [ 1.579931] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.584858] ehci-pci: EHCI PCI platform driver [ 1.589285] ehci-platform: EHCI generic platform driver [ 1.594620] ehci-orion: EHCI orion driver [ 1.598554] SPEAr-ehci: EHCI SPEAr driver [ 1.602541] ehci-st: EHCI STMicroelectronics driver [ 1.607423] ehci-exynos: EHCI EXYNOS driver [ 1.611561] ehci-atmel: EHCI Atmel driver [ 1.615577] tegra-ehci: Tegra EHCI driver [ 1.619564] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.625661] ohci-pci: OHCI PCI platform driver [ 1.630103] ohci-platform: OHCI generic platform driver [ 1.635410] SPEAr-ohci: OHCI SPEAr driver [ 1.639353] ohci-st: OHCI STMicroelectronics driver [ 1.644234] ohci-atmel: OHCI Atmel driver [ 1.648606] usbcore: registered new interface driver usb-storage [ 1.657631] i2c /dev entries driver [ 1.664798] meson_wdt c1109900.watchdog: Watchdog enabled (timeout=8 sec, nowayout=0) [ 1.669563] sdhci: Secure Digital Host Controller Interface driver [ 1.673191] sdhci: Copyright(c) Pierre Ossman [ 1.678802] Synopsys Designware Multimedia Card Interface Driver [ 1.686962] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.691290] ledtrig-cpu: registered to indicate activity on CPUs [ 1.695624] usbcore: registered new interface driver usbhid [ 1.700680] usbhid: USB HID core driver [ 1.706429] meson-saradc c1108680.adc: Linked as a consumer to regulator.2 [ 1.713988] NET: Registered protocol family 10 [ 1.716667] Segment Routing with IPv6 [ 1.719495] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.725875] NET: Registered protocol family 17 [ 1.729780] can: controller area network core (rev 20170425 abi 9) [ 1.736010] NET: Registered protocol family 29 [ 1.740369] can: raw protocol (rev 20170425) [ 1.744641] can: broadcast manager protocol (rev 20170425 t) [ 1.750271] can: netlink gateway (rev 20170425) max_hops=1 [ 1.756119] Key type dns_resolver registered [ 1.760173] ThumbEE CPU extension supported. [ 1.764295] Registering SWP/SWPB emulation handler [ 1.769532] Loading compiled-in X.509 certificates [ 1.781655] USB_VBUS: supplied by P5V0 [ 1.782255] TFLASH_VDD: supplied by VCC3V3 [ 1.788006] dwc2 c90c0000.usb: c90c0000.usb supply vusb_d not found, using dummy regulator [ 1.792155] dwc2 c90c0000.usb: Linked as a consumer to regulator.0 [ 1.798302] dwc2 c90c0000.usb: c90c0000.usb supply vusb_a not found, using dummy regulator [ 1.873039] dwc2 c90c0000.usb: dwc2_check_params: Invalid parameter lpm=1 [ 1.874190] dwc2 c90c0000.usb: dwc2_check_params: Invalid parameter lpm_clock_gating=1 [ 1.882091] dwc2 c90c0000.usb: dwc2_check_params: Invalid parameter besl=1 [ 1.888974] dwc2 c90c0000.usb: dwc2_check_params: Invalid parameter hird_threshold_en=1 [ 1.897200] dwc2 c90c0000.usb: DWC OTG Controller [ 1.901650] dwc2 c90c0000.usb: new USB bus registered, assigned bus number 1 [ 1.908721] dwc2 c90c0000.usb: irq 26, io mem 0xc90c0000 [ 1.914685] hub 1-0:1.0: USB hub found [ 1.917731] hub 1-0:1.0: 1 port detected [ 1.926491] platform c1108c20.mmc:slot@1: Linked as a consumer to regulator.7 [ 1.928764] platform c1108c20.mmc:slot@1: Linked as a consumer to regulator.8 [ 1.936239] platform c1108c20.mmc:slot@1: Got CD GPIO [ 1.971784] hctosys: unable to open rtc device (rtc0) [ 1.972101] DDR_VDDC: disabling [ 1.974388] VDD_RTC: disabling [ 1.977367] USB_VBUS: disabling [ 1.980491] TF_IO: disabling [ 1.991172] Freeing unused kernel memory: 2048K [ 2.023185] Run /init as init process [ 2.074104] random: systemd-tmpfile: uninitialized urandom read (16 bytes read) [ 2.086621] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.092686] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.112317] mmc0: new high speed SDHC card at address 59b4 [ 2.112827] mmcblk0: mmc0:59b4 MS 14.7 GiB [ 2.118470] mmcblk0: p1 [ 2.283367] random: fast init done [ 2.353069] usb 1-1: new high-speed USB device number 2 using dwc2 [ 2.605412] hub 1-1:1.0: USB hub found [ 2.605796] hub 1-1:1.0: 4 ports detected [ 2.923056] usb 1-1.3: new high-speed USB device number 3 using dwc2 [ 3.493717] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 4.147746] random: crng init done [ 4.147777] random: 7 urandom warning(s) missed due to ratelimiting [ 4.417156] systemd[1]: System time before build time, advancing clock. [ 4.519987] systemd[1]: systemd 240 running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 4.536269] systemd[1]: Detected architecture arm. [ 4.574795] systemd[1]: Set hostname to <archl-c1b>. [ 5.150449] systemd[1]: File /usr/lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 5.162251] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 5.599766] systemd[1]: Created slice system-getty.slice. [ 5.633224] systemd[1]: Reached target Remote File Systems. [ 5.663360] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 5.703851] systemd[1]: Listening on Network Service Netlink Socket. [ 5.743627] systemd[1]: Listening on udev Control Socket. [ 7.028402] systemd-journald[157]: Received request to flush runtime journal from PID 1 [ 7.081337] systemd-journald[157]: File /var/log/journal/51c87449aeaa4e468fec4ee58aba323b/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 10.852824] pwm-regulator: supplied by regulator-dummy [ 10.854040] cpu cpu0: Linked as a consumer to regulator.9 [ 10.861120] cpu cpu0: Dropping the link to regulator.9 [ 10.863131] cpu cpu0: Linked as a consumer to regulator.9 [ 10.899711] meson8b-dwmac c9410000.ethernet eth0: device MAC address b6:eb:a7:2a:72:96 [ 10.918212] RTL8211F Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL8211F Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:00, irq=32) [ 10.930674] meson8b-dwmac c9410000.ethernet eth0: No Safety Features support found [ 10.932625] meson8b-dwmac c9410000.ethernet eth0: PTP not supported by HW [ 11.161075] media: Linux media interface: v0.10 [ 11.487123] videodev: Linux video capture interface: v2.00 [ 11.990011] usb 1-1.3: 3:1: cannot get freq at ep 0x84 [ 12.007944] usbcore: registered new interface driver snd-usb-audio [ 12.016251] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (1b71:0056) [ 12.057036] uvcvideo 1-1.3:1.0: Entity type for entity Extension 4 was not initialized! [ 12.059420] uvcvideo 1-1.3:1.0: Entity type for entity Processing 3 was not initialized! [ 12.067599] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initialized! [ 12.075657] input: USB 2.0 Camera: HD 720P Webcam as /devices/platform/soc/c90c0000.usb/usb1/1-1/1-1.3/1-1.3:1.0/input/input0 [ 12.086900] usbcore: registered new interface driver uvcvideo [ 12.092239] USB Video Class driver (1.1.1) [ 14.596020] meson8b-dwmac c9410000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 14.599257] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 14.793044] usb 1-1.3: reset high-speed USB device number 3 using dwc2 [ 18.253011] usb 1-1.3: reset high-speed USB device number 3 using dwc2 [ 21.643017] usb 1-1.3: reset high-speed USB device number 3 using dwc2 [ 25.033012] usb 1-1.3: reset high-speed USB device number 3 using dwc2 [ 28.412995] usb 1-1.3: reset high-speed USB device number 3 using dwc2 [ 31.453141] usb 1-1.3: reset high-speed USB device number 3 using dwc2 [ 34.479613] usb 1-1.3: USB disconnect, device number 3 [ 35.533145] usb 1-1.3: new high-speed USB device number 4 using dwc2 [ 35.774785] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (1b71:0056) [ 35.844293] uvcvideo 1-1.3:1.0: Entity type for entity Extension 4 was not initialized! [ 35.846672] uvcvideo 1-1.3:1.0: Entity type for entity Processing 3 was not initialized! [ 35.854781] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initialized! [ 35.862764] input: USB 2.0 Camera: HD 720P Webcam as /devices/platform/soc/c90c0000.usb/usb1/1-1/1-1.3/1-1.3:1.0/input/input1 [ 35.918493] usb 1-1.3: 3:1: cannot get freq at ep 0x84 [ 38.693139] usb 1-1.3: reset high-speed USB device number 4 using dwc2 [ 41.703091] usb 1-1.3: reset high-speed USB device number 4 using dwc2 [ 44.703074] usb 1-1.3: reset high-speed USB device number 4 using dwc2 [ 47.844735] usb 1-1.3: USB disconnect, device number 4 [ 49.003119] usb 1-1.3: new high-speed USB device number 5 using dwc2 [ 49.240976] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (1b71:0056) [ 49.263761] uvcvideo 1-1.3:1.0: Entity type for entity Extension 4 was not initialized! [ 49.266154] uvcvideo 1-1.3:1.0: Entity type for entity Processing 3 was not initialized! [ 49.275938] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initialized! [ 49.282428] input: USB 2.0 Camera: HD 720P Webcam as /devices/platform/soc/c90c0000.usb/usb1/1-1/1-1.3/1-1.3:1.0/input/input2 [ 49.324147] usb 1-1.3: 3:1: cannot get freq at ep 0x84 [ 52.453053] usb 1-1.3: reset high-speed USB device number 5 using dwc2 [ 55.354923] usb 1-1.3: USB disconnect, device number 5 [ 56.403079] usb 1-1.3: new high-speed USB device number 6 using dwc2 [ 56.644551] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (1b71:0056) [ 56.700434] uvcvideo 1-1.3:1.0: Entity type for entity Extension 4 was not initialized! [ 56.702814] uvcvideo 1-1.3:1.0: Entity type for entity Processing 3 was not initialized! [ 56.710921] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initialized! [ 56.718923] input: USB 2.0 Camera: HD 720P Webcam as /devices/platform/soc/c90c0000.usb/usb1/1-1/1-1.3/1-1.3:1.0/input/input3 [ 56.759533] usb 1-1.3: 3:1: cannot get freq at ep 0x84 [ 59.693078] usb 1-1.3: reset high-speed USB device number 6 using dwc2 [ 62.703039] usb 1-1.3: reset high-speed USB device number 6 using dwc2 [ 65.693073] usb 1-1.3: reset high-speed USB device number 6 using dwc2 [ 68.703030] usb 1-1.3: reset high-speed USB device number 6 using dwc2 [ 72.080440] usb 1-1.3: USB disconnect, device number 6 [ 73.173056] usb 1-1.3: new high-speed USB device number 7 using dwc2 [ 73.479178] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (1b71:0056) [ 73.500877] uvcvideo 1-1.3:1.0: Entity type for entity Extension 4 was not initialized! [ 73.503416] uvcvideo 1-1.3:1.0: Entity type for entity Processing 3 was not initialized! [ 73.511383] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initialized! [ 73.520356] input: USB 2.0 Camera: HD 720P Webcam as /devices/platform/soc/c90c0000.usb/usb1/1-1/1-1.3/1-1.3:1.0/input/input4 [ 73.584953] usb 1-1.3: 3:1: cannot get freq at ep 0x84 [ 76.444634] usb 1-1.3: reset high-speed USB device number 7 using dwc2 [ 79.463056] usb 1-1.3: reset high-speed USB device number 7 using dwc2 [ 82.443077] usb 1-1.3: reset high-speed USB device number 7 using dwc2 [ 85.453029] usb 1-1.3: reset high-speed USB device number 7 using dwc2 [ 88.442987] usb 1-1.3: reset high-speed USB device number 7 using dwc2 [ 91.443025] usb 1-1.3: reset high-speed USB device number 7 using dwc2 [ 94.443024] usb 1-1.3: reset high-speed USB device number 7 using dwc2 [ 97.442968] usb 1-1.3: reset high-speed USB device number 7 using dwc2 [ 100.443000] usb 1-1.3: reset high-speed USB device number 7 using dwc2 [ 103.442992] usb 1-1.3: reset high-speed USB device number 7 using dwc2 [ 106.442983] usb 1-1.3: reset high-speed USB device number 7 using dwc2 [ 109.442937] usb 1-1.3: reset high-speed USB device number 7 using dwc2 [ 112.511510] usb 1-1.3: reset high-speed USB device number 7 using dwc2 [ 115.442939] usb 1-1.3: reset high-speed USB device number 7 using dwc2 [ 118.452957] usb 1-1.3: reset high-speed USB device number 7 using dwc2 [ 121.442957] usb 1-1.3: reset high-speed USB device number 7 using dwc2 [ 124.442950] usb 1-1.3: reset high-speed USB device number 7 using dwc2 [ 127.443907] usb 1-1.3: reset high-speed USB device number 7 using dwc2 [ 130.442961] usb 1-1.3: reset high-speed USB device number 7 using dwc2 [ 133.442901] usb 1-1.3: reset high-speed USB device number 7 using dwc2 [ 136.443990] usb 1-1.3: reset high-speed USB device number 7 using dwc2 [ 139.442881] usb 1-1.3: reset high-speed USB device number 7 using dwc2 [ 142.385686] usb 1-1.3: USB disconnect, device number 7 [ 142.894500] usb 1-1.3: new high-speed USB device number 8 using dwc2 [ 143.131022] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (1b71:0056) [ 143.156169] uvcvideo 1-1.3:1.0: Entity type for entity Extension 4 was not initialized! [ 143.158569] uvcvideo 1-1.3:1.0: Entity type for entity Processing 3 was not initialized! [ 143.166707] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initialized! [ 143.177153] input: USB 2.0 Camera: HD 720P Webcam as /devices/platform/soc/c90c0000.usb/usb1/1-1/1-1.3/1-1.3:1.0/input/input5 [ 143.196563] usb 1-1.3: 3:1: cannot get freq at ep 0x84 [ 146.352877] usb 1-1.3: reset high-speed USB device number 8 using dwc2 [ 149.442857] usb 1-1.3: reset high-speed USB device number 8 using dwc2 [ 152.462887] usb 1-1.3: reset high-speed USB device number 8 using dwc2 [ 155.442890] usb 1-1.3: reset high-speed USB device number 8 using dwc2 [ 158.442839] usb 1-1.3: reset high-speed USB device number 8 using dwc2 [ 161.442852] usb 1-1.3: reset high-speed USB device number 8 using dwc2 [ 164.812728] usb 1-1.3: reset high-speed USB device number 8 using dwc2 [ 167.932877] usb 1-1.3: reset high-speed USB device number 8 using dwc2 [ 170.843987] usb 1-1.3: USB disconnect, device number 8 [ 171.912850] usb 1-1.3: new high-speed USB device number 9 using dwc2 [ 172.175010] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (1b71:0056) [ 172.217220] uvcvideo 1-1.3:1.0: Entity type for entity Extension 4 was not initialized! [ 172.219599] uvcvideo 1-1.3:1.0: Entity type for entity Processing 3 was not initialized! [ 172.227707] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initialized! [ 172.244338] input: USB 2.0 Camera: HD 720P Webcam as /devices/platform/soc/c90c0000.usb/usb1/1-1/1-1.3/1-1.3:1.0/input/input6 [ 172.291289] usb 1-1.3: 3:1: cannot get freq at ep 0x84 [ 175.442805] usb 1-1.3: reset high-speed USB device number 9 using dwc2 [ 178.462837] usb 1-1.3: reset high-speed USB device number 9 using dwc2 [ 181.442794] usb 1-1.3: reset high-speed USB device number 9 using dwc2 [ 184.442793] usb 1-1.3: reset high-speed USB device number 9 using dwc2 [ 187.442780] usb 1-1.3: reset high-speed USB device number 9 using dwc2 [ 190.442824] usb 1-1.3: reset high-speed USB device number 9 using dwc2 [ 193.442805] usb 1-1.3: reset high-speed USB device number 9 using dwc2 [ 196.442802] usb 1-1.3: reset high-speed USB device number 9 using dwc2 [ 199.442814] usb 1-1.3: reset high-speed USB device number 9 using dwc2 [ 202.442820] usb 1-1.3: reset high-speed USB device number 9 using dwc2 [ 205.482783] usb 1-1.3: reset high-speed USB device number 9 using dwc2 [ 208.472809] usb 1-1.3: reset high-speed USB device number 9 using dwc2 [ 211.442732] usb 1-1.3: reset high-speed USB device number 9 using dwc2 [ 214.432720] usb 1-1.3: reset high-speed USB device number 9 using dwc2 [ 217.442763] usb 1-1.3: reset high-speed USB device number 9 using dwc2 [ 220.442714] usb 1-1.3: reset high-speed USB device number 9 using dwc2 [ 223.442752] usb 1-1.3: reset high-speed USB device number 9 using dwc2 [ 226.443956] usb 1-1.3: reset high-speed USB device number 9 using dwc2 [ 229.432737] usb 1-1.3: reset high-speed USB device number 9 using dwc2 [ 232.442706] usb 1-1.3: reset high-speed USB device number 9 using dwc2 [ 235.452607] usb 1-1.3: reset high-speed USB device number 9 using dwc2 [ 237.298873] systemd-journald[157]: File /var/log/journal/51c87449aeaa4e468fec4ee58aba323b/user-1000.journal corrupted or uncleanly shut down, renaming and replacing. [ 237.648786] systemd-journald[157]: Failed to set ACL on /var/log/journal/51c87449aeaa4e468fec4ee58aba323b/user-1000.journal, ignoring: Operation not supported [ 238.692674] usb 1-1.3: reset high-speed USB device number 9 using dwc2 [ 241.712702] usb 1-1.3: reset high-speed USB device number 9 using dwc2 [ 244.692671] usb 1-1.3: reset high-speed USB device number 9 using dwc2 [ 247.692670] usb 1-1.3: reset high-speed USB device number 9 using dwc2 [ 248.876089] usb 1-1.3: USB disconnect, device number 9 [ 249.292722] usb 1-1.3: new high-speed USB device number 10 using dwc2 [ 249.530986] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (1b71:0056) [ 249.553264] uvcvideo 1-1.3:1.0: Entity type for entity Extension 4 was not initialized! [ 249.555653] uvcvideo 1-1.3:1.0: Entity type for entity Processing 3 was not initialized! [ 249.565429] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initialized! [ 249.571908] input: USB 2.0 Camera: HD 720P Webcam as /devices/platform/soc/c90c0000.usb/usb1/1-1/1-1.3/1-1.3:1.0/input/input7 [ 249.595074] usb 1-1.3: 3:1: cannot get freq at ep 0x84 [ 252.442703] usb 1-1.3: reset high-speed USB device number 10 using dwc2 [ 255.442683] usb 1-1.3: reset high-speed USB device number 10 using dwc2 [ 256.624711] usb 1-1.3: USB disconnect, device number 10 [ 257.112681] usb 1-1.3: new high-speed USB device number 11 using dwc2 [ 257.380950] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (1b71:0056) [ 257.403603] uvcvideo 1-1.3:1.0: Entity type for entity Extension 4 was not initialized! [ 257.406004] uvcvideo 1-1.3:1.0: Entity type for entity Processing 3 was not initialized! [ 257.415792] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initialized! [ 257.422245] input: USB 2.0 Camera: HD 720P Webcam as /devices/platform/soc/c90c0000.usb/usb1/1-1/1-1.3/1-1.3:1.0/input/input8 [ 257.444880] usb 1-1.3: 3:1: cannot get freq at ep 0x84 [ 260.442667] usb 1-1.3: reset high-speed USB device number 11 using dwc2 [ 263.442629] usb 1-1.3: reset high-speed USB device number 11 using dwc2
Optional Paste Settings
Category:
None
Cryptocurrency
Cybersecurity
Fixit
Food
Gaming
Haiku
Help
History
Housing
Jokes
Legal
Money
Movies
Music
Pets
Photo
Science
Software
Source Code
Spirit
Sports
Travel
TV
Writing
Tags:
Syntax Highlighting:
None
Bash
C
C#
C++
CSS
HTML
JSON
Java
JavaScript
Lua
Markdown (PRO members only)
Objective C
PHP
Perl
Python
Ruby
Swift
4CS
6502 ACME Cross Assembler
6502 Kick Assembler
6502 TASM/64TASS
ABAP
AIMMS
ALGOL 68
APT Sources
ARM
ASM (NASM)
ASP
ActionScript
ActionScript 3
Ada
Apache Log
AppleScript
Arduino
Asymptote
AutoIt
Autohotkey
Avisynth
Awk
BASCOM AVR
BNF
BOO
Bash
Basic4GL
Batch
BibTeX
Blitz Basic
Blitz3D
BlitzMax
BrainFuck
C
C (WinAPI)
C Intermediate Language
C for Macs
C#
C++
C++ (WinAPI)
C++ (with Qt extensions)
C: Loadrunner
CAD DCL
CAD Lisp
CFDG
CMake
COBOL
CSS
Ceylon
ChaiScript
Chapel
Clojure
Clone C
Clone C++
CoffeeScript
ColdFusion
Cuesheet
D
DCL
DCPU-16
DCS
DIV
DOT
Dart
Delphi
Delphi Prism (Oxygene)
Diff
E
ECMAScript
EPC
Easytrieve
Eiffel
Email
Erlang
Euphoria
F#
FO Language
Falcon
Filemaker
Formula One
Fortran
FreeBasic
FreeSWITCH
GAMBAS
GDB
GDScript
Game Maker
Genero
Genie
GetText
Go
Godot GLSL
Groovy
GwBasic
HQ9 Plus
HTML
HTML 5
Haskell
Haxe
HicEst
IDL
INI file
INTERCAL
IO
ISPF Panel Definition
Icon
Inno Script
J
JCL
JSON
Java
Java 5
JavaScript
Julia
KSP (Kontakt Script)
KiXtart
Kotlin
LDIF
LLVM
LOL Code
LScript
Latex
Liberty BASIC
Linden Scripting
Lisp
Loco Basic
Logtalk
Lotus Formulas
Lotus Script
Lua
M68000 Assembler
MIX Assembler
MK-61/52
MPASM
MXML
MagikSF
Make
MapBasic
Markdown (PRO members only)
MatLab
Mercury
MetaPost
Modula 2
Modula 3
Motorola 68000 HiSoft Dev
MySQL
Nagios
NetRexx
Nginx
Nim
NullSoft Installer
OCaml
OCaml Brief
Oberon 2
Objeck Programming Langua
Objective C
Octave
Open Object Rexx
OpenBSD PACKET FILTER
OpenGL Shading
Openoffice BASIC
Oracle 11
Oracle 8
Oz
PARI/GP
PCRE
PHP
PHP Brief
PL/I
PL/SQL
POV-Ray
ParaSail
Pascal
Pawn
Per
Perl
Perl 6
Phix
Pic 16
Pike
Pixel Bender
PostScript
PostgreSQL
PowerBuilder
PowerShell
ProFTPd
Progress
Prolog
Properties
ProvideX
Puppet
PureBasic
PyCon
Python
Python for S60
QBasic
QML
R
RBScript
REBOL
REG
RPM Spec
Racket
Rails
Rexx
Robots
Roff Manpage
Ruby
Ruby Gnuplot
Rust
SAS
SCL
SPARK
SPARQL
SQF
SQL
SSH Config
Scala
Scheme
Scilab
SdlBasic
Smalltalk
Smarty
StandardML
StoneScript
SuperCollider
Swift
SystemVerilog
T-SQL
TCL
TeXgraph
Tera Term
TypeScript
TypoScript
UPC
Unicon
UnrealScript
Urbi
VB.NET
VBScript
VHDL
VIM
Vala
Vedit
VeriLog
Visual Pro Log
VisualBasic
VisualFoxPro
WHOIS
WhiteSpace
Winbatch
XBasic
XML
XPP
Xojo
Xorg Config
YAML
YARA
Z80 Assembler
ZXBasic
autoconf
jQuery
mIRC
newLISP
q/kdb+
thinBasic
Paste Expiration:
Never
Burn after read
10 Minutes
1 Hour
1 Day
1 Week
2 Weeks
1 Month
6 Months
1 Year
Paste Exposure:
Public
Unlisted
Private
Folder:
(members only)
Password
NEW
Enabled
Disabled
Burn after read
NEW
Paste Name / Title:
Create New Paste
Hello
Guest
Sign Up
or
Login
Sign in with Facebook
Sign in with Twitter
Sign in with Google
You are currently not logged in, this means you can not edit or delete anything you paste.
Sign Up
or
Login
Public Pastes
w
15 hours ago | 0.09 KB
[email protected]
- idiot sending fr...
17 hours ago | 1.35 KB
Untitled
20 hours ago | 0.03 KB
Checking in availability
1 day ago | 0.66 KB
TRMP TOKEN
1 day ago | 1.56 KB
Untitled
1 day ago | 0.16 KB
my-push Script
1 day ago | 0.19 KB
Mapscan v2.0 - Archeagus Grey Hack Series, Ep...
JavaScript | 2 days ago | 9.34 KB
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the
Cookies Policy
.
OK, I Understand
Not a member of Pastebin yet?
Sign Up
, it unlocks many cool features!
