Create a new version of paste:

cribari@darwin5 ~ $ sudo smartctl -i /dev/sda
[sudo] password for cribari: 
smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.9.16-1-MANJARO] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     LITEON CV1-8B256
Serial Number:    0026271030A4
Firmware Version: G882002
User Capacity:    256,060,514,304 bytes [256 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 1.5 Gb/s)
Local Time is:    Wed Mar 22 23:51:47 2017 -03
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

cribari@darwin5 ~ $ sudo smartctl -s on -d ata /dev/sda
smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.9.16-1-MANJARO] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

cribari@darwin5 ~ $ sudo smartctl -d ata -H /dev/sda
smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.9.16-1-MANJARO] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

cribari@darwin5 ~ $ sudo smartctl --attributes --log=selftest /dev/sda
smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.9.16-1-MANJARO] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  5 Reallocated_Sector_Ct   0x0003   100   100   000    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0002   100   100   000    Old_age   Always       -       224
 12 Power_Cycle_Count       0x0003   100   100   000    Pre-fail  Always       -       377
177 Wear_Leveling_Count     0x0003   100   100   000    Pre-fail  Always       -       12
179 Used_Rsvd_Blk_Cnt_Tot   0x0003   100   100   010    Pre-fail  Always       -       136
181 Program_Fail_Cnt_Total  0x0003   100   100   000    Pre-fail  Always       -       0
182 Erase_Fail_Count_Total  0x0003   100   100   000    Pre-fail  Always       -       0
183 Runtime_Bad_Block       0x0003   100   100   000    Pre-fail  Always       -       0
187 Reported_Uncorrect      0x0003   100   100   000    Pre-fail  Always       -       0
190 Airflow_Temperature_Cel 0x0022   100   100   000    Old_age   Always       -       45
199 UDMA_CRC_Error_Count    0x0003   100   100   000    Pre-fail  Always       -       0
235 Unknown_Attribute       0x0003   100   100   000    Pre-fail  Always       -       11
241 Total_LBAs_Written      0x0003   100   100   000    Pre-fail  Always       -       46194
242 Total_LBAs_Read         0x0003   100   100   000    Pre-fail  Always       -       24439

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%       213         -
# 2  Short offline       Completed without error       00%       213         -

cribari@darwin5 ~ $ sudo smartctl -d ata -a /dev/sda
smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.9.16-1-MANJARO] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     LITEON CV1-8B256
Serial Number:    0026271030A4
Firmware Version: G882002
User Capacity:    256,060,514,304 bytes [256 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 1.5 Gb/s)
Local Time is:    Wed Mar 22 23:53:27 2017 -03
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x02) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever 
                                        been run.
Total time to complete Offline 
data collection:                (    0) seconds.
Offline data collection
capabilities:                    (0x11) SMART execute Offline immediate.
                                        No Auto Offline data collection support.
                                        Suspend Offline collection upon new
                                        command.
                                        No Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        No Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine 
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        (  10) minutes.
SCT capabilities:              (0x003d) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  5 Reallocated_Sector_Ct   0x0003   100   100   000    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0002   100   100   000    Old_age   Always       -       224
 12 Power_Cycle_Count       0x0003   100   100   000    Pre-fail  Always       -       377
177 Wear_Leveling_Count     0x0003   100   100   000    Pre-fail  Always       -       12
179 Used_Rsvd_Blk_Cnt_Tot   0x0003   100   100   010    Pre-fail  Always       -       136
181 Program_Fail_Cnt_Total  0x0003   100   100   000    Pre-fail  Always       -       0
182 Erase_Fail_Count_Total  0x0003   100   100   000    Pre-fail  Always       -       0
183 Runtime_Bad_Block       0x0003   100   100   000    Pre-fail  Always       -       0
187 Reported_Uncorrect      0x0003   100   100   000    Pre-fail  Always       -       0
190 Airflow_Temperature_Cel 0x0022   100   100   000    Old_age   Always       -       45
199 UDMA_CRC_Error_Count    0x0003   100   100   000    Pre-fail  Always       -       0
235 Unknown_Attribute       0x0003   100   100   000    Pre-fail  Always       -       11
241 Total_LBAs_Written      0x0003   100   100   000    Pre-fail  Always       -       46194
242 Total_LBAs_Read         0x0003   100   100   000    Pre-fail  Always       -       24439

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%       213         -
# 2  Short offline       Completed without error       00%       213         -

Selective Self-tests/Logging not supported

cribari@darwin5 ~ $ sudo smartctl -d ata -t long /dev/sda
smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.9.16-1-MANJARO] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Extended self-test routine immediately in off-line mode".
Drive command "Execute SMART Extended self-test routine immediately in off-line mode" successful.
Testing has begun.
Please wait 10 minutes for test to complete.
Test will complete after Thu Mar 23 00:05:25 2017

Use smartctl -X to abort test.

ribari@darwin5 ~ $ sudo smartctl -a /dev/sda
smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.9.16-1-MANJARO] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     LITEON CV1-8B256
Serial Number:    0026271030A4
Firmware Version: G882002
User Capacity:    256,060,514,304 bytes [256 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 1.5 Gb/s)
Local Time is:    Thu Mar 23 00:08:24 2017 -03
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x02) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever 
                                        been run.
Total time to complete Offline 
data collection:                (    0) seconds.
Offline data collection
capabilities:                    (0x11) SMART execute Offline immediate.
                                        No Auto Offline data collection support.
                                        Suspend Offline collection upon new
                                        command.
                                        No Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        No Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine 
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        (  10) minutes.
SCT capabilities:              (0x003d) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  5 Reallocated_Sector_Ct   0x0003   100   100   000    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0002   100   100   000    Old_age   Always       -       224
 12 Power_Cycle_Count       0x0003   100   100   000    Pre-fail  Always       -       377
177 Wear_Leveling_Count     0x0003   100   100   000    Pre-fail  Always       -       12
179 Used_Rsvd_Blk_Cnt_Tot   0x0003   100   100   010    Pre-fail  Always       -       136
181 Program_Fail_Cnt_Total  0x0003   100   100   000    Pre-fail  Always       -       0
182 Erase_Fail_Count_Total  0x0003   100   100   000    Pre-fail  Always       -       0
183 Runtime_Bad_Block       0x0003   100   100   000    Pre-fail  Always       -       0
187 Reported_Uncorrect      0x0003   100   100   000    Pre-fail  Always       -       0
190 Airflow_Temperature_Cel 0x0022   100   100   000    Old_age   Always       -       45
199 UDMA_CRC_Error_Count    0x0003   100   100   000    Pre-fail  Always       -       0
235 Unknown_Attribute       0x0003   100   100   000    Pre-fail  Always       -       11
241 Total_LBAs_Written      0x0003   100   100   000    Pre-fail  Always       -       46198
242 Total_LBAs_Read         0x0003   100   100   000    Pre-fail  Always       -       24443

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%       224         -
# 2  Extended offline    Completed without error       00%       213         -
# 3  Short offline       Completed without error       00%       213         -

Selective Self-tests/Logging not supported