Create a new version of paste:

2015-11-28 22:42:48  ★ Richard Hawkins would walk over to the toolstation as he then bends down and reaches for the toolbox
2015-11-28 22:42:53  ★ with his right hand.      ((Richard Hawkins))
2015-11-28 22:43:17  ★ Richard Hawkins would then stand back up as he then carries the toolbox to the 370z.
2015-11-28 22:43:32  ★ Richard Hawkins would then place the toolbox down onto the ground next to the 370Z.
2015-11-28 22:44:02  ★ Richard Hawkins would then walk back to the toolstation as he then grabs ahold of the 4 plastic pads, with
2015-11-28 22:44:07  ★ both of his hands.      ((Richard Hawkins))
2015-11-28 22:44:38  ★ Richard Hawkins would then carry the pads back to the 370Z as he then bends down and placess one of them
2015-11-28 22:45:13  ★ Richard Hawkins under the end of the skirt.
2015-11-28 22:45:27  ★ Richard Hawkins would do the same with all the other pads.
2015-11-28 22:46:38  ★ after he has placed all the plastic pads under the each end of the skirts.      ((Richard Hawkins))
2015-11-28 22:47:42  ★ he would walk to the lift's control panel and presses on the button with his index finger,      ((Richard Hawkins))
2015-11-28 22:50:25  ★ raising the middle part of the lift.      ((Richard Hawkins))
2015-11-28 22:50:45  ★ Richard Hawkins would release the button when all four wheels of the 370Z are off the ground.
2015-11-28 22:51:32  ★ Richard Hawkins would then crouch down to the toolbox as he then uses both of his hands to open it.
2015-11-28 22:52:03  ★ Richard Hawkins would then reach for the breaker bar  and grabs ahold of it with his right hand.
2015-11-28 22:52:19  ★ Richard Hawkins would then use his left hand to grab ahold of the 17mm socket.
2015-11-28 22:52:32  ★ Richard Hawkins would then connect the socket to the breaker bar.
2015-11-28 22:58:20  ★ Richard Hawkins would then hover the breaker bar over the wheelnuts as he then starts to loosen the nuts.
2015-11-28 22:58:59  ★ Richard Hawkins would then place the nuts into his pocket as he then places the breaker bar down, next
2015-11-28 22:59:04  ★ to the lift,      ((Richard Hawkins))
2015-11-28 22:59:22  ★ Richard Hawkins would then grab ahold of the wheel with both of his hands as he then attempts to
2015-11-28 22:59:32  ★ remove the wheel from the wheelhub.      ((Richard Hawkins))
2015-11-28 23:00:02  ★ Richard Hawkins would then lower the wheel down to the ground as he then rolls it to the wall of the garage
2015-11-28 23:02:22  ★ and leans it agains the wall.      ((Richard Hawkins))
2015-11-28 23:04:56  ★ Richard Hawkins would then walk back to the 370Z as he then crouches down to the toolbox.
2015-11-28 23:05:17  ★ Richard Hawkins would then reach for the socket wrench and the 13mm socket as he then connects the two.
2015-11-28 23:07:00  ★ Richard Hawkins would then lean into the wheelhub as he then locates the sway bar end link .
2015-11-28 23:07:42  ★ Richard Hawkins would then start to loosen and removes two nuts, holding the sway bar end link in place
2015-11-28 23:08:11  ★ Richard Hawkins would then place the nuts into his pocket as he then removes the sway bar end link.
2015-11-28 23:08:38  ★ Richard Hawkins would place the old sway bar end link onto the lift as he then goes back to the wheelhub.
2015-11-28 23:09:06  ★ Richard Hawkins would then use the socket wrench to remove the two bolts and nuts, connecting the 
2015-11-28 23:09:25  ★ shock absorber to the front steering knuckle.      ((Richard Hawkins))
2015-11-28 23:10:26  ★ Richard Hawkins would then stand up from the wheelhub as he then walks to the front driverside door of the 
2015-11-28 23:10:45  ★ 370Z and reaches out for the handle as he then pulls on it, opening the door.      ((Richard Hawkins))
2015-11-28 23:11:13  ★ Richard Hawkins would then bend down as he then reaches out for the lever and pulls on it, opening the hood.
2015-11-28 23:11:34  ★ Richard Hawkins would then walk to the front of the car as he then slides his hands under the hood, flicking
2015-11-28 23:11:44  ★ a switch and raises the hood up.      ((Richard Hawkins))
2015-11-28 23:12:08  ★ Richard Hawkins would then walk back to the wheelhub as he then crouches down and picks up the 
2015-11-28 23:12:34  ★ socket wrench with his right hand and stands back up      ((Richard Hawkins))
2015-11-28 23:14:52  ★ Richard Hawkins would then start to remove three nuts which are in the engine bay.
2015-11-28 23:15:24  ★ Richard Hawkins would then place the socket wrench with 13mm socket onto one of the nuts as he then loosens 
2015-11-28 23:15:36  ★ it and removes it and places the nut into his pocket.      ((Richard Hawkins))
2015-11-28 23:15:50  ★ Richard Hawkins would do the same thing to other two nuts.
2015-11-28 23:16:15  ★ Richard Hawkins would then crouch down to the wheelhub as he then places the socket wrench down 
2015-11-28 23:16:33  ★ next to the lift as he then grabs ahold of the shock absorber.      ((Richard Hawkins))
2015-11-28 23:16:49  ★ Richard Hawkins would then remove the shock absorber form the wheel hub and stands back up, as 
2015-11-28 23:16:56  ★ he is holding it.      ((Richard Hawkins))
2015-11-28 23:17:12  ★ Richard Hawkins walks to the toolstation with the shock absorber in his hands .
2015-11-28 23:18:26  ★ Richard Hawkins places the shock absorber onto the toolstation as he then walks to the cardboard box
2015-11-28 23:18:35  ★ which is located next to the toolstation.      ((Richard Hawkins))
2015-11-28 23:18:58  ★ Richard Hawkins would use one of his keys to open the cardboard box.
2015-11-28 23:19:31  ★ Richard Hawkins would then grab ahold of the new coilover , with both of his hands as he then stands back up
2015-11-28 23:19:39  ★ and compares it to the old one.      ((Richard Hawkins))
2015-11-28 23:20:11  ★ Richard Hawkins would then walk back to the 370Z with the shock absorber still in his hands.
2015-11-28 23:20:35  ★ Richard Hawkins would then crouch down to the wheelhub as he then attempts to align the shock absorber
2015-11-28 23:20:41  ★ with the holdes on top.      ((Richard Hawkins))
2015-11-28 23:22:14  ★ as the shock absorber sldies into the holdes, he would rest it onto the steering knuckle.      ((Richard Hawkins))
2015-11-28 23:23:02  ★ Richard Hawkins would then grab ahold of the socket wrench with his right hand as he then stands back up
2015-11-28 23:24:16  ★ and starts to tighten the 3nuts that are holding the coilover against the chassis.      ((Richard Hawkins))
2015-11-28 23:24:36  ★ Richard Hawkins would then tighten them as much as he can as he then crouches beck down to the wheelhub.
2015-11-28 23:25:07  ★ Richard Hawkins would then reach into his pocket as he then takes out 2 bolts and nuts from there.
2015-11-28 23:25:33  ★ Richard Hawkins would then slide the two bolts in that are connecting the coilover to the steering knuckle.
2015-11-28 23:25:53  ★ Richard Hawkins would then hand tighten the two buts as he then uses the socket wrench with the 13mm sockets
2015-11-28 23:26:05  ★ to tighten them as hard as he can.      ((Richard Hawkins))
2015-11-28 23:26:17  ★ Richard Hawkins would then stand back up as he then walks back to the toolstation
2015-11-28 23:26:38  ★ and grabs ahold of the new sway bar end link, with his right hand.      ((Richard Hawkins))
2015-11-28 23:26:58  ★ Richard Hawkins would then walk back to the 370Z as he  then crouches down to the wheelhub.
2015-11-28 23:27:19  ★ Richard Hawkins would then slide the sway bar end link into the place as he then reaches into his pocket
2015-11-28 23:27:40  ★ taking out two nuts and rolls them onto the sway bar end ink.      ((Richard Hawkins))
2015-11-28 23:27:53  ★ Richard Hawkins would then use the socket wrench to tighten them.
2015-11-28 23:28:59  ★ Richard Hawkins would then start to set the coilover to the lowest setting as he then  stand up form the
2015-11-28 23:29:08  ★ wheelhub and walks to the toolstation.      ((Richard Hawkins))
2015-11-28 23:29:50  ★ Richard Hawkins would then crouch down to some new wheels as he then ripps off the plastic around it.
2015-11-28 23:30:45  ★ Richard Hawkins would then roll the tyre with the Toyo Proxes R888 tyres on them, to the 370Z as he then
2015-11-28 23:31:06  ★ grabs ahold of the wheel with both of his hands and lifts it to the wheelhub.      ((Richard Hawkins))
2015-11-28 23:31:28  ★ Richard Hawkins would then reach into his pocket as he then grabs ahold of the wheelnuts and hand tightens 
2015-11-28 23:31:30  ★ them.      ((Richard Hawkins))
2015-11-28 23:32:01  ★ Richard Hawkins would then rach for the breaker bar as he then disconnects the 17mm socket from it.
2015-11-28 23:32:52  ★ Richard Hawkins would then place the breaker bar back down onto the lift as he then reaches into the toolbox
2015-11-28 23:33:17  ★ and grabs ahold of the torque bar.      ((Richard Hawkins))
2015-11-28 23:33:38  ★ Richard Hawkins would then connect the 17mm socket to the torque bar and sets the torque up to
2015-11-28 23:33:41  ★ 150NM      ((Richard Hawkins))
2015-11-28 23:34:27  ★ Richard Hawkins would then use the torque bar to tighten all five wheelnuts.
2015-11-28 23:36:16  ★ Richard Hawkins would repeat the same action on all 3 coilovers and wheels.
2015-11-28 23:36:40  ★ after doing so he would walk around the car as he collects his tools and places them into th      ((Richard Hawkins))
2015-11-28 23:36:48  ★ the toolbox.      ((Richard Hawkins))
2015-11-28 23:37:35  ★ Richard Hawkins would then close the toolbox as he then grabs ahold of it and walks back to the toolstation
2015-11-28 23:37:37  ★ with it.      ((Richard Hawkins))
2015-11-28 23:37:59  ★ Richard Hawkins would then lower the toolbox down onto the ground as he then walks to the elevator control
2015-11-28 23:38:02  ★ panel.      ((Richard Hawkins))
2015-11-28 23:38:32  ★ Richard Hawkins would then press a button on the control panel, lowering the elevator until it is as low as 
2015-11-28 23:38:35  ★ it can go.      ((Richard Hawkins))
2015-11-28 23:39:09  ★ Richard Hawkins would then release the button as he then walks to the car and bends down to pick up every 
2015-11-28 23:39:34  ★ single one of the plastic pads and takes them back to the toolstation, placing them down.      ((Richard Hawkins))
2015-11-28 23:40:19  ★ Richard Hawkins would then walk to the front of the car as he then closes the hood of the car.