Create a new version of paste:

** = Important

**Always put media in MP4 and subtitles in SRT because it is well understood everywhere

**Avoid AV1 Codec (not very well understood by many devices, will cause strain)

Set Static IP Address (with Network Tools)

ip route | grep default
default via 192.168.1.1 dev eth0 proto dhcp src 192.168.1.149 metric 100

In this case 192.168.1.1 is our routers IP Address and 192.168.1.149 is our IP Address.

sudo nano /etc/resolv.conf
# Generated by NetworkManager
search lan
nameserver 192.168.1.1	#This is our routers IP Address
nameserver 2603:6081:ba00:7c::1

Ctrl+X To exit
nmtui then press, "Edit a connection," then press desired network connection.
Use arrow keys to navigate to IPv4 Configuration then select Manual, navigate to <Show> and press Enter.
Navigate to Addresses and put in your desired vacant IP Address.
Navigate to Gateway and put the IP Address of your router.
Select DNS servers and put in your desired DNS server's IP or your router's IP.
Navigate down to <OK> and press Enter.
Select <Back> then select Quit.
sudo systemctl restart NetworkManager

To check type hostname -I
It should be the one you have set in the network manager tool.

Install Plex
1.	Install Dependencies

sudo apt update
sudo apt upgrade
sudo apt install apt-transport-https

2.	Add Plex GPG keys

curl https://downloads.plex.tv/plex-keys/PlexSign.key | gpg --dearmor | sudo tee /usr/share/keyrings/plex-archive-keyring.gpg >/dev/null

3.	Add Plex Repository to our sources list

echo deb [signed-by=/usr/share/keyrings/plex-archive-keyring.gpg] https://downloads.plex.tv/repo/deb public main | sudo tee /etc/apt/sources.list.d/plexmediaserver.list

4.	Update our repos

sudo apt update

If you get the error "/usr/lib/apt/methods/https" could not be found. Then the https transport package hasn’t been installed. Double check that it has been installed correctly.

5.	Install Plex Media Server

sudo apt install plexmediaserver

6.	Mount Storage (in the below section)

7.	Open in web browser

http://<your_ip_address>:32400

Replace <your_ip_address> with your IP address.

Mount Storage
1a. See storage devices are attached and their UUIDs: lsblk -f
1b. List disk partitions and identify size of attached drives: fdisk -l
2. Create a directory to mount your drive: sudo mkdir /mnt/media
3. Mount your external drive: sudo mount /dev/sda1 /mnt/media	<-- In this /dev/sda1 is our drive, you can find yours using steps 1a&b
4. Persist the mount (will stay mounted after reboot)
4a. View contents of fstab: cat /etc/fstab
4b. Open fstab with nano text editor: sudo nano /etc/fstab
4c. Make a new line with: UUID=<drive_uuid_from_step_1a>  /mnt/media               <drive_format>    defaults  0       0
**Replace everything in <> with your correct information that applies to you.

All of the above content was made by Pi My Life Up and I have put them together in a simple guide for all.
I have spent a bunch of time on this guide and I plan on using this myself to host a Plex Media Server on my own Raspberry Pi 4.
Please do not repost this because neither I or Pi My Life Up would really appreciate that.

Thank you,
KpasteG13