Pastebin
API
tools
faq
paste
Login
Sign up
Please fix the following errors:
New Paste
Syntax Highlighting
WTware v.5.4.84/RPi supervisor. WTC listener is active. WTC broadcast listener is active. [ KERNEL] [ 0.000000] Booting Linux on physical CPU 0x0 [ KERNEL] [ 0.000000] Linux version 4.9.17 (aka@c12) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.4) ) #5 SMP Sat Mar 25 15:48:02 +04 2017 [ KERNEL] [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d [ KERNEL] [ 0.000000] CPU: div instructions available: patching division code [ KERNEL] [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ KERNEL] [ 0.000000] OF: fdt:Machine model: Raspberry Pi 3 Model B Rev 1.2 [ KERNEL] [ 0.000000] cma: Reserved 8 MiB at 0x3a800000 [ KERNEL] [ 0.000000] Memory policy: Data cache writealloc [ KERNEL] [ 0.000000] On node 0 totalpages: 241664 [ KERNEL] [ 0.000000] free_area_init_node: node 0, pgdat 80b21d40, node_mem_map b9faa000 [ KERNEL] [ 0.000000] Normal zone: 2124 pages used for memmap [ KERNEL] [ 0.000000] Normal zone: 0 pages reserved [ KERNEL] [ 0.000000] Normal zone: 241664 pages, LIFO batch:31 [ KERNEL] [ 0.000000] percpu: Embedded 11 pages/cpu @b9f70000 s16012 r8192 d20852 u45056 [ KERNEL] [ 0.000000] pcpu-alloc: s16012 r8192 d20852 u45056 alloc=11*4096 [ KERNEL] [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ KERNEL] [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 239540 [ KERNEL] [ 0.000000] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbdepth=32 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 quiet wtboot=mmc [ KERNEL] [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ KERNEL] [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ KERNEL] [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ KERNEL] [ 0.000000] Memory: 938124K/966656K available (5120K kernel code, 139K rwdata, 900K rodata, 4096K init, 373K bss, 20340K reserved, 8192K cma-reserved) [ KERNEL] [ 0.000000] Virtual kernel memory layout: [ KERNEL] [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ KERNEL] [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ KERNEL] [ 0.000000] vmalloc : 0xbb800000 - 0xff800000 (1088 MB) [ KERNEL] [ 0.000000] lowmem : 0x80000000 - 0xbb000000 ( 944 MB) [ KERNEL] [ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB) [ KERNEL] [ 0.000000] .text : 0x80008000 - 0x80600000 (6112 kB) [ KERNEL] [ 0.000000] .init : 0x80700000 - 0x80b00000 (4096 kB) [ KERNEL] [ 0.000000] .data : 0x80b00000 - 0x80b22dd8 ( 140 kB) [ KERNEL] [ 0.000000] .bss : 0x80b24000 - 0x80b815e0 ( 374 kB) [ KERNEL] [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ KERNEL] [ 0.000000] Hierarchical RCU implementation. [ KERNEL] [ 0.000000] Build-time adjustment of leaf fanout to 32. [ KERNEL] [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ KERNEL] [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys). [ KERNEL] [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ KERNEL] [ 0.000009] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ KERNEL] [ 0.000020] Switching to timer-based delay loop, resolution 52ns [ KERNEL] [ 0.000239] Console: colour dummy device 80x30 [ KERNEL] [ 0.000255] console [tty0] enabled [ KERNEL] [ 0.000273] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [ KERNEL] [ 0.000288] pid_max: default: 32768 minimum: 301 [ KERNEL] [ 0.000434] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ KERNEL] [ 0.000441] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ KERNEL] [ 0.001288] Disabling cpuset control group subsystem [ KERNEL] [ 0.001423] CPU: Testing write buffer coherency: ok [ KERNEL] [ 0.001870] CPU0: update cpu_capacity 1024 [ KERNEL] [ 0.001877] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ KERNEL] [ 0.001926] Setting up static identity map for 0x100000 - 0x100034 [ KERNEL] [ 0.003614] CPU1: update cpu_capacity 1024 [ KERNEL] [ 0.003621] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ KERNEL] [ 0.004185] CPU2: update cpu_capacity 1024 [ KERNEL] [ 0.004191] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ KERNEL] [ 0.004735] CPU3: update cpu_capacity 1024 [ KERNEL] [ 0.004741] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ KERNEL] [ 0.004814] Brought up 4 CPUs [ KERNEL] [ 0.004823] SMP: Total of 4 processors activated (153.60 BogoMIPS). [ KERNEL] [ 0.004827] CPU: All CPU(s) started in HYP mode. [ KERNEL] [ 0.004830] CPU: Virtualization extensions available. [ KERNEL] [ 0.005364] devtmpfs: initialized [ KERNEL] [ 0.014742] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4 [ KERNEL] [ 0.015128] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ KERNEL] [ 0.015144] futex hash table entries: 1024 (order: 4, 65536 bytes) [ KERNEL] [ 0.015626] pinctrl core: initialized pinctrl subsystem [ KERNEL] [ 0.016167] NET: Registered protocol family 16 [ KERNEL] [ 0.018002] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ KERNEL] [ 0.028099] bcm2835-mbox 3f00b880.mailbox: mailbox enabled [ KERNEL] [ 0.111113] bcm2835-dma 3f007000.dma: DMA legacy API manager at bb80f000, dmachans=0x1 [ KERNEL] [ 0.113469] usbcore: registered new interface driver usbfs [ KERNEL] [ 0.113597] usbcore: registered new interface driver hub [ KERNEL] [ 0.113687] usbcore: registered new device driver usb [ KERNEL] [ 0.120114] raspberrypi-firmware soc:firmware: Attached to firmware from 2017-03-24 13:53 [ KERNEL] [ 0.122364] clocksource: Switched to clocksource arch_sys_counter [ KERNEL] [ 0.137377] NET: Registered protocol family 2 [ KERNEL] [ 0.137958] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ KERNEL] [ 0.138065] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ KERNEL] [ 0.138249] TCP: Hash tables configured (established 8192 bind 8192) [ KERNEL] [ 0.138334] UDP hash table entries: 512 (order: 2, 16384 bytes) [ KERNEL] [ 0.138376] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ KERNEL] [ 0.138552] NET: Registered protocol family 1 [ KERNEL] [ 2.194387] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ KERNEL] [ 2.230196] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ KERNEL] [ 2.230209] io scheduler noop registered [ KERNEL] [ 2.230214] io scheduler deadline registered (default) [ KERNEL] [ 2.238261] BCM2708FB: allocated DMA memory fa910000 [ KERNEL] [ 2.238303] BCM2708FB: allocated DMA channel 0 @ bb80f000 [ KERNEL] [ 2.297070] Console: switching to colour frame buffer device 240x67 [ KERNEL] [ 2.334473] bcm2835-rng 3f104000.rng: hwrng registered [ KERNEL] [ 2.334669] vc-cma: Videocore CMA driver [ KERNEL] [ 2.334677] vc-cma: vc_cma_base = 0x00000000 [ KERNEL] [ 2.334682] vc-cma: vc_cma_size = 0x00000000 (0 MiB) [ KERNEL] [ 2.334686] vc-cma: vc_cma_initial = 0x00000000 (0 MiB) [ KERNEL] [ 2.334989] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB) [ KERNEL] [ 2.342990] zram: Added device: zram0 [ KERNEL] [ 2.343031] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ KERNEL] [ 2.569166] Core Release: 2.80a [ KERNEL] [ 2.569175] Setting default values for core params [ KERNEL] [ 2.569201] Finished setting default values for core params [ KERNEL] [ 2.769554] Using Buffer DMA mode [ KERNEL] [ 2.769560] Periodic Transfer Interrupt Enhancement - disabled [ KERNEL] [ 2.769563] Multiprocessor Interrupt Enhancement - disabled [ KERNEL] [ 2.769569] OTG VER PARAM: 0, OTG VER FLAG: 0 [ KERNEL] [ 2.769599] Dedicated Tx FIFOs mode [ KERNEL] [ 2.770093] WARN::dwc_otg_hcd_init:1053: FIQ DMA bounce buffers: virt = 0xba904000 dma = 0xfa904000 len=9024 [ KERNEL] [ 2.770119] FIQ FSM acceleration enabled for : [ KERNEL] [ 2.770119] Non-periodic Split Transactions [ KERNEL] [ 2.770119] Periodic Split Transactions [ KERNEL] [ 2.770119] High-Speed Isochronous Endpoints [ KERNEL] [ 2.770119] Interrupt/Control Split Transaction hack enabled [ KERNEL] [ 2.770126] dwc_otg: Microframe scheduler enabled [ KERNEL] [ 2.770171] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x80392e48 [ KERNEL] [ 2.770180] WARN::hcd_init_fiq:460: FIQ ASM at 0x803931ac length 36 [ KERNEL] [ 2.770191] WARN::hcd_init_fiq:486: MPHI regs_base at 0xbb925000 [ KERNEL] [ 2.770248] dwc_otg 3f980000.usb: DWC OTG Controller [ KERNEL] [ 2.770282] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1 [ KERNEL] [ 2.770314] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000 [ KERNEL] [ 2.770362] Init: Port Power? op_state=1 [ KERNEL] [ 2.770366] Init: Power Port (0) [ KERNEL] [ 2.770548] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ KERNEL] [ 2.770557] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ KERNEL] [ 2.770564] usb usb1: Product: DWC OTG Controller [ KERNEL] [ 2.770571] usb usb1: Manufacturer: Linux 4.9.17 dwc_otg_hcd [ KERNEL] [ 2.770578] usb usb1: SerialNumber: 3f980000.usb [ KERNEL] [ 2.771311] hub 1-0:1.0: USB hub found [ KERNEL] [ 2.771348] hub 1-0:1.0: 1 port detected [ KERNEL] [ 2.772053] dwc_otg: FIQ enabled [ KERNEL] [ 2.772058] dwc_otg: NAK holdoff enabled [ KERNEL] [ 2.772062] dwc_otg: FIQ split-transaction FSM enabled [ KERNEL] [ 2.772075] Module dwc_common_port init [ KERNEL] [ 2.772549] usbcore: registered new interface driver usbtouchscreen [ KERNEL] [ 2.773927] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer [ KERNEL] [ 2.774404] bcm2835-cpufreq: min=600000 max=1200000 [ KERNEL] [ 2.775471] sdhost-bcm2835 3f202000.sdhost: could not get clk, deferring probe [ KERNEL] [ 2.778004] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe [ KERNEL] [ 2.790786] ledtrig-cpu: registered to indicate activity on CPUs [ KERNEL] [ 2.797197] hidraw: raw HID events driver (C) Jiri Kosina [ KERNEL] [ 2.797599] usbcore: registered new interface driver usbhid [ KERNEL] [ 2.797607] usbhid: USB HID core driver [ KERNEL] [ 2.798505] vchiq: vchiq_init_state: slot_zero = 0xba980000, is_master = 0 [ KERNEL] [ 2.802249] NET: Registered protocol family 17 [ KERNEL] [ 2.802425] Registering SWP/SWPB emulation handler [ KERNEL] [ 2.803017] registered taskstats version 1 [ KERNEL] [ 2.803244] vc-sm: Videocore shared memory driver [ KERNEL] [ 2.803251] [vc_sm_connected_init]: start [ KERNEL] [ 2.810223] [vc_sm_connected_init]: end - returning 0 [ KERNEL] [ 2.814106] sdhost: log_buf @ ba907000 (fa907000) [ KERNEL] [ 2.892375] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1) [ KERNEL] [ 2.894504] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0 [ KERNEL] [ 2.894508] mmc-bcm2835 3f300000.mmc: DMA channel allocated [ KERNEL] [ 2.962421] of_cfs_init [ KERNEL] [ 2.962478] of_cfs_init: OK [ KERNEL] [ 2.972152] Freeing unused kernel memory: 4096K (80700000 - 80b00000) [ KERNEL] [ 2.986542] Indeed it is in host mode hprt0 = 00021501 [ KERNEL] [ 3.052523] mmc0: host does not support reading read-only switch, assuming write-enable [ KERNEL] [ 3.054463] mmc0: new high speed SDHC card at address 59b4 [ KERNEL] [ 3.054931] mmcblk0: mmc0:59b4 USDU1 7.51 GiB [ KERNEL] [ 3.056557] mmcblk0: p1 [ hotplug] [ 3.055861] Block device 179:1. No action. [ hotplug] [ 3.056051] Block device 179:0. No action. [ KERNEL] [ 3.059460] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ KERNEL] [ 3.060947] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ KERNEL] [ 3.062434] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ KERNEL] [ 3.065107] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ KERNEL] [ 3.068115] random: fast init done [ KERNEL] [ 3.154697] mmc1: new high speed SDIO card at address 0001 [ KERNEL] [ 3.202552] usb 1-1: new high-speed USB device number 2 using dwc_otg [ KERNEL] [ 3.202708] Indeed it is in host mode hprt0 = 00001101 [ hotplug] [ 3.243746] Block device 254:0. No action. [ pfac] [ 3.302322] Run /sbin/initrd. [ pfac] [ 3.302829] Ok, PID 591. [ initrd] [ 3.305581] WTware shell v.5.4.84/RPi [ initrd] [ 3.351354] Local media boot. [ KERNEL] [ 3.462633] usb 1-1: New USB device found, idVendor=0424, idProduct=9514 [ KERNEL] [ 3.462646] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ KERNEL] [ 3.463543] hub 1-1:1.0: USB hub found [ KERNEL] [ 3.463683] hub 1-1:1.0: 5 ports detected [ KERNEL] [ 3.782398] usb 1-1.1: new high-speed USB device number 3 using dwc_otg [ KERNEL] [ 3.912647] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00 [ KERNEL] [ 3.912658] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ KERNEL] [ 4.012396] usb 1-1.2: new low-speed USB device number 4 using dwc_otg [ KERNEL] [ 4.161569] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c31c [ KERNEL] [ 4.161580] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ KERNEL] [ 4.161587] usb 1-1.2: Product: USB Keyboard [ KERNEL] [ 4.161595] usb 1-1.2: Manufacturer: Logitech [ KERNEL] [ 4.182219] input: Logitech USB Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:046D:C31C.0001/input/input0 [ KERNEL] [ 4.243805] hid-generic 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-3f980000.usb-1.2/input0 [ KERNEL] [ 4.273340] input: Logitech USB Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.1/0003:046D:C31C.0002/input/input1 [ KERNEL] [ 4.342883] hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-3f980000.usb-1.2/input1 /--- FILE "/bootmedia/config.txt" ----------------------- | # For more options and information see | # http://www.raspberrypi.org/documentation/configuration/config-txt.md | # Some settings may impact device functionality. See link above for details | # Uncomment if you get no picture on HDMI for a default "safe" mode. | #hdmi_safe=1 | # Uncomment this if your display has a black border of unused pixels visible | # and your display can output without overscan. | disable_overscan=1 | # Uncomment if hdmi display is not detected and composite is being output. | #hdmi_force_hotplug=1 | # Uncomment to force a specific HDMI mode (this will force VGA). | #hdmi_group=1 | #hdmi_mode=1 | # Force the monitor to HDMI mode so that sound will be sent over HDMI cable. | #hdmi_drive=2 | # Uncomment to increase signal to HDMI, if you have interference, blanking, or | # no display. | #config_hdmi_boost=4 | # Uncomment to overclock the arm. 700 MHz is the default. | #arm_freq=800 | disable_splash=1 | #hdmi_group=2 | # 800x600: hdmi_mode=9 | # 1024x768: hdmi_mode=16 | # 1280x1024: hdmi_mode=35 | # 1360x768: hdmi_mode=39 | # 1400x1050: hdmi_mode=42 | # 1440x900: hdmi_mode=47 | # 1600x1200: hdmi_mode=51 | # 1680x1050: hdmi_mode=58 | # 1366x768: hdmi_mode=81 | # 1920x1080: hdmi_mode=82 | # 1920x1200: hdmi_mode=69 | framebuffer_depth=32 | # Uncomment for 16-bit color. It is up to two | # times faster than default 32-bit. | #framebuffer_depth=16 | # Enable onboard audio (HDMI or jack). | dtparam=audio=on | # Removes the warning overlay. | #avoid_warnings=1 | # Additionally allows turbo when low-voltage is present. | #avoid_warnings=2 \---------------------------------------------------- [ initrd] [ 4.420541] WTpassword present: 47f2408324dece4910d51a01647dadd0. [ KERNEL] [ 4.452412] usb 1-1.3: new low-speed USB device number 5 using dwc_otg [ KERNEL] [ 4.587317] usb 1-1.3: New USB device found, idVendor=093a, idProduct=2510 [ KERNEL] [ 4.587328] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ KERNEL] [ 4.587335] usb 1-1.3: Product: USB Optical Mouse [ KERNEL] [ 4.587343] usb 1-1.3: Manufacturer: PixArt [ KERNEL] [ 4.591972] input: PixArt USB Optical Mouse as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.0/0003:093A:2510.0003/input/input2 [ KERNEL] [ 4.592682] hid-generic 0003:093A:2510.0003: input,hidraw2: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-3f980000.usb-1.3/input0 /--- FILE "/bootmedia/configs/initrd.wtc" ----------------------- | [BOM] | clientIP=* | config=local | setupPassword=47f2408324dece4910d51a01647dadd0 \---------------------------------------------------- [ initrd] [ 6.449996] Load ethernet drivers. [ initrd] [ 6.450120] modprobe smsc95xx. [ KERNEL] [ 6.460134] smsc95xx v1.0.5 [ KERNEL] [ 6.546262] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:f4:6a:7a [ KERNEL] [ 6.546449] usbcore: registered new interface driver smsc95xx [ KERNEL] [ 6.634357] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ KERNEL] [ 7.312388] usb 1-1.5: new high-speed USB device number 6 using dwc_otg [ KERNEL] [ 7.889360] usb 1-1.5: New USB device found, idVendor=04c5, idProduct=2028 [ KERNEL] [ 7.889372] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ KERNEL] [ 7.889379] usb 1-1.5: Product: ZM-VE400 [ KERNEL] [ 7.889387] usb 1-1.5: Manufacturer: ZALMAN [ KERNEL] [ 7.889394] usb 1-1.5: SerialNumber: W62690BJ [ KERNEL] [ 8.165698] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1 [ initrd] [ 8.235689] WTpassword present: 47f2408324dece4910d51a01647dadd0. [ initrd] [ 8.730155] dhcp: 384 bytes from 192.168.77.201. [ initrd] [ 8.730266] 00000000:0000016C0000000000110000C0A84DC9FFFFFFFF00430044016C000002010600 ...l.........M......C.D.l...... [ initrd] [ 8.730339] 00000020:67458B6B0000000000000000C0A84D28C0A84DC900000000B827EBF46A7A0000 gE.k..........M(..M......'..jz.. [ initrd] [ 8.730410] 00000040:0000000000000000000000000000000000000000000000000000000000000000 ................................ [ initrd] [ 8.730479] 00000060:0000000000000000000000000000000000000000000000000000000000000000 ................................ [ initrd] [ 8.730550] 00000080:00000000000000002F626F6F742F7078656C696E75782F7078656C696E75782E ......../boot/pxelinux/pxelinux. [ initrd] [ 8.730619] 000000a0:3000000000000000000000000000000000000000000000000000000000000000 0............................... [ initrd] [ 8.730688] 000000c0:0000000000000000000000000000000000000000000000000000000000000000 ................................ [ initrd] [ 8.730782] 000000e0:0000000000000000000000000000000000000000000000000000000000000000 ................................ [ initrd] [ 10.290168] dhcp: 384 bytes from 192.168.77.201. [ initrd] [ 10.290296] 00000000:0000016C0000000000110000C0A84DC9FFFFFFFF00430044016C000002010600 ...l.........M......C.D.l...... [ initrd] [ 10.290369] 00000020:67458B6B0000000000000000C0A84D28C0A84DC900000000B827EBF46A7A0000 gE.k..........M(..M......'..jz.. [ initrd] [ 10.290438] 00000040:0000000000000000000000000000000000000000000000000000000000000000 ................................ [ initrd] [ 10.290507] 00000060:0000000000000000000000000000000000000000000000000000000000000000 ................................ [ initrd] [ 10.290576] 00000080:00000000000000002F626F6F742F7078656C696E75782F7078656C696E75782E ......../boot/pxelinux/pxelinux. [ initrd] [ 10.290644] 000000a0:3000000000000000000000000000000000000000000000000000000000000000 0............................... [ initrd] [ 10.290714] 000000c0:0000000000000000000000000000000000000000000000000000000000000000 ................................ [ initrd] [ 10.290782] 000000e0:0000000000000000000000000000000000000000000000000000000000000000 ................................ [ initrd] [ 10.330098] dhcp: server address 192.168.77.201. [ initrd] [ 10.330173] dhcp: 192.168.77.40/255.255.255.0. [ initrd] [ 10.330243] dhcp: default gateway 192.168.77.1. [ initrd] [ 10.330311] dhcp: DNS 192.168.77.201. [ initrd] [ 10.330377] dhcp: DNS 195.94.226.1. [ initrd] [ 10.330445] dhcp: DNS 195.94.224.4. [ initrd] [ 10.330512] dhcp: domain my-domain.local. [ initrd] [ 10.330580] dhcp: TFTP from 066 192.168.77.201. [ initrd] [ 10.330647] dhcp: TFTP 192.168.77.201. [ initrd] [ 10.330713] dhcp: boot file (067) /boot/pxelinux/pxelinux.0. [ initrd] [ 10.330780] TFTP binary "/boot/pxelinux/", configs prefix "/boot/", using "/" slash. Send broadcast WTCU discover. [ pfac] [ 10.333001] Run /sbin/httpd. [ initrd] [ 10.333069] Run '/sbin/httpd', log '/tmp/httpd.out', env '', pid ''. [ pfac] [ 10.333172] Ok, PID 635. [ httpd] [ 10.337576] HTTP Server, WTware v.5.4.84/RPi [ initrd] [ 10.460749] USB: 04c5:2028 Fujitsu, Ltd. [ initrd] [ 10.460891] USB: 093a:2510 Pixart Imaging, Inc. Optical Mouse. [ initrd] [ 10.460965] USB: 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter. [ initrd] [ 10.461038] USB: 0424:9514 Standard Microsystems Corp. SMC9514 Hub. [ initrd] [ 10.461108] USB: 046d:c31c Logitech, Inc. Keyboard K120. [ initrd] [ 10.461177] Copy /bootmedia/configs/config.wtc to /tmp/config.wtc. [ initrd] [ 10.461971] Common local disk config: /--- FILE "/tmp/config.wtc" ----------------------- | [BOM] | connection | server=192.168.77.49 | connection | server=Vserv2 | sound=on | disk=usb \---------------------------------------------------- [ initrd] [ 10.463007] Remount /bootmedia for writing. [ initrd] [ 10.465317] Remount /bootmedia as read-only. /--- FILE "/etc/config.compiled" ----------------------- | [BOM] | connection | server=192.168.77.49 | connection | server=Vserv2 | sound=on | disk=usb \---------------------------------------------------- [ initrd] [ 10.479843] Hostname: "wtwB827EBF46A7A". Everyone can control terminal by RSH. RSH: listener is active. Send broadcast WTCU discover. [ httpd] [ 10.724985] Reread settings. [ httpd] [ 10.725124] Everyone can control terminal by HTTP. [ gm] [ 10.729074] WTware session manager v.5.4.84/RPi. [ gm] [ 10.730210] EV_REL flag found. Add mouse event2: PixArt USB Optical Mouse. [ gm] [ 10.730301] Add keyboard event1: Logitech USB Keyboard. [ gm] [ 10.730379] Add keyboard event0: Logitech USB Keyboard. [ gm] [ 10.730528] Display mode: 1920x1080, 32 bit, 0 Hz, modeline "", DDC enabled, connector 0. [ gm] [ 10.766006] Framebuffer device found. [ gm] [ 10.766087] LINELENBYTES 7680 [ gm] [ 10.766161] VLEN 8294400 [ gm] [ 10.802503] Use /lib/ui32.so. [ gm] [ 10.852239] Unpack /bootmedia/packages/pi2-alsa. [ gm] [ 10.942872] modprobe snd-bcm2835. [ gm] [ 10.964748] modprobe snd-usb-audio. /--- FILE "/proc/asound/devices" ----------------------- | 0: [ 0] : control | 16: [ 0- 0]: digital audio playback | 17: [ 0- 1]: digital audio playback | 33: : timer \---------------------------------------------------- [ KERNEL] [ 10.985197] usbcore: registered new interface driver snd-usb-audio [ pfac] [ 10.986237] Run /sbin/rdpsnd sndvol 100 100 50. [ gm] [ 10.986353] /dev/snd/pcmC0D1p character device. [ pfac] [ 10.986481] Ok, PID 662. [ gm] [ 10.986534] /dev/snd/pcmC0D0p character device. [ pfac] [ 10.986654] Run /sbin/rdpsnd 1 0 100 0 -1. [ gm] [ 10.986717] /dev/snd/controlC0 character device. [ pfac] [ 10.986814] Ok, PID 663. [ gm] [ 10.986875] /dev/snd/timer character device. [ gm] [ 10.987034] Preconfigure ALSA. [ gm] [ 10.987136] Run '/sbin/rdpsnd sndvol 100 100 50', log '', env '', pid ''. [ gm] [ 10.987270] Run sound daemon. [ gm] [ 10.987384] Run '/sbin/rdpsnd 1 0 100 0 -1', log '', env '', pid ''. [ gm] [ 10.987492] Load usb storage driver. [ gm] [ 10.987570] modprobe scsi_mod. [ rdpsnd] [ 10.991059] RDP Sound Redirector, WTware v.5.4.84/RPi. [ sndvol] [ 11.000134] Card 'ALSA'/'bcm2835 ALSA'. [ rdpsnd] [ 11.000225] Card 'ALSA'/'bcm2835 ALSA'. [ sndvol] [ 11.000328] Mixer name: 'Broadcom Mixer'. [ rdpsnd] [ 11.000371] Mixer name: 'Broadcom Mixer'. [ sndvol] [ 11.000452] Components: ''. [ rdpsnd] [ 11.000512] Components: ''. [ sndvol] [ 11.000607] Controls: 6. [ rdpsnd] [ 11.000650] Controls: 6. [ sndvol] [ 11.000725] ALSA: control 'PCM Playback Volume'. [ rdpsnd] [ 11.000767] ALSA: control 'PCM Playback Volume'. [ sndvol] [ 11.000846] ALSA: control 'PCM Playback Switch'. [ rdpsnd] [ 11.000888] ALSA: control 'PCM Playback Switch'. [ sndvol] [ 11.000964] ALSA: control 'PCM Playback Route'. [ rdpsnd] [ 11.001005] ALSA: control 'PCM Playback Route'. [ sndvol] [ 11.001081] ALSA: control 'IEC958 Playback Default'. [ rdpsnd] [ 11.001123] ALSA: control 'IEC958 Playback Default'. [ sndvol] [ 11.001200] ALSA: control 'IEC958 Playback Con Mask'. [ rdpsnd] [ 11.001242] ALSA: control 'IEC958 Playback Con Mask'. [ sndvol] [ 11.001336] ALSA: control 'IEC958 Playback PCM Stream'. [ rdpsnd] [ 11.001381] ALSA: control 'IEC958 Playback PCM Stream'. [ pfac] [ 11.001455] Process pid 662 terminated, status 00000000. [ sndvol] [ 11.001497] Inactive control IEC958 Playback PCM Stream'. [ rdpsnd] [ 11.001537] Inactive control IEC958 Playback PCM Stream'. [ KERNEL] [ 11.004549] SCSI subsystem initialized [ gm] [ 11.004971] modprobe usb-storage. [ KERNEL] [ 11.018298] usb-storage 1-1.5:1.0: USB Mass Storage device detected [ KERNEL] [ 11.018605] scsi host0: usb-storage 1-1.5:1.0 [ KERNEL] [ 11.019824] usbcore: registered new interface driver usb-storage [ gm] [ 11.019454] modprobe sd_mod. [ gm] [ 11.029780] Load EXFAT filesystem driver. [ gm] [ 11.029993] modprobe fuse. [ gm] [ 11.043588] modprobe exfat. [ KERNEL] [ 11.043723] fuse init (API version 7.26) [ KERNEL] [ 11.055883] exFAT: Version 1.2.9 [ gm] [ 11.115739] Nobody can control terminal by VNC. [ KERNEL] [ 12.073106] scsi 0:0:0:0: CD-ROM ZALMAN Virtual CD-Rom PQ: 0 ANSI: 0 [ KERNEL] [ 14.000084] random: crng init done [ gm] [ 41.815082] Run '/sbin/resolver 0xe57bd0 dns [192.168.77.49]', log '', env '', pid ''. [ pfac] [ 41.815364] Run /sbin/resolver 0xe57bd0 dns [192.168.77.49]. [ pfac] [ 41.816157] Ok, PID 709. [ pfac] [ 41.820602] Process pid 709 terminated, status 00000000. [ gm] [ 41.826625] 192.168.77.49 => 192.168.77.49. [ gm] [ 41.826816] Free ram before fork terminal client /sbin/rdpclient (session 1): 918604 Kb. [ gm] [ 41.826900] Run '/sbin/rdpclient 1', log '/tmp/rdpclient.out', env '', pid ''. [ pfac] [ 41.826978] Run /sbin/rdpclient 1. [ pfac] [ 41.827526] Ok, PID 710. [ rdpclient 710] [ 41.834763] RDP Terminal Client, WTware v.5.4.84/RPi, pipe 1, pid 710. [ rdpclient 710] [ 41.835339] Use /lib/ui32.so. [ rdpclient 710] [ 41.836350] Make RDP session with 192.168.77.49, port 3389. [ rdpclient 710] [ 41.836463] No username. [ rdpclient 710] [ 41.836542] No password. [ rdpclient 710] [ 41.836619] No PIN. [ rdpclient 710] [ 41.836725] No domain. [ rdpclient 710] [ 41.836833] No shell. [ rdpclient 710] [ 41.836910] No directory. [ rdpclient 710] [ 41.836987] Window: 1920x1080@24. [ rdpclient 710] [ 41.837064] PFlags 0x0000002F. [ rdpclient 710] [ 41.837140] Keyboard 00000409:00000000. [ rdpclient 710] [ 41.837214] My hostname "wtwB827EBF46A7A". [ rdpclient 710] [ 41.837300] TCP: connecting to 192.168.77.49:3389. [ rdpclient 710] [ 41.837925] TCP: connection with 192.168.77.49:3389 established. [ rdpclient 710] [ 41.838006] Turn keepalive on. [ rdpclient 710] [ 41.838868] Free ram after buffers allocation: 917944 KB. [ rdpclient 710] [ 46.398231] Reconnect with CredSSP enabled. [ rdpclient 710] [ 46.398386] TCP: reconnecting to 192.168.77.49:3389. [ rdpclient 710] [ 46.399504] TCP: connection with 192.168.77.49:3389 established. [ rdpclient 710] [ 46.399589] Turn keepalive on. [ rdpclient 710] [ 46.402798] Server supports GFX Pipeline. [ rdpclient 710] [ 46.402912] CredSSP. [ rdpclient 710] [ 46.402992] SSL/TLS. [ rdpclient 710] [ 46.461489] Enable font smoothing and Desktop Composition. [ rdpclient 710] [ 46.463710] RDP4 encryption. [ rdpclient 710] [ 46.488211] TS_STATUS_FINDING_DESTINATION [ rdpclient 710] [ 46.488571] TS_STATUS_LOADING_DESTINATION [ rdpclient 710] [ 46.488960] TS_STATUS_REDIRECTING_TO_DESTINATION [ rdpclient 710] [ 46.499526] TS_STATUS_BRINGING_SESSION_ONLINE [ rdpclient 710] [ 46.500789] TS_STATUS_VM_LOADING [ rdpclient 710] [ 46.568845] GFX codec. [ rdpclient 710] [ 46.892723] Run 4 tile threads. [ rdpclient 710] [ 46.944959] errorInfo 0x00000000. [ rdpclient 710] [ 47.407613] SessionId 0x00000003: domain\user.
Optional Paste Settings
Category:
None
Cryptocurrency
Cybersecurity
Fixit
Food
Gaming
Haiku
Help
History
Housing
Jokes
Legal
Money
Movies
Music
Pets
Photo
Science
Software
Source Code
Spirit
Sports
Travel
TV
Writing
Tags:
Syntax Highlighting:
None
Bash
C
C#
C++
CSS
HTML
JSON
Java
JavaScript
Lua
Markdown (PRO members only)
Objective C
PHP
Perl
Python
Ruby
Swift
4CS
6502 ACME Cross Assembler
6502 Kick Assembler
6502 TASM/64TASS
ABAP
AIMMS
ALGOL 68
APT Sources
ARM
ASM (NASM)
ASP
ActionScript
ActionScript 3
Ada
Apache Log
AppleScript
Arduino
Asymptote
AutoIt
Autohotkey
Avisynth
Awk
BASCOM AVR
BNF
BOO
Bash
Basic4GL
Batch
BibTeX
Blitz Basic
Blitz3D
BlitzMax
BrainFuck
C
C (WinAPI)
C Intermediate Language
C for Macs
C#
C++
C++ (WinAPI)
C++ (with Qt extensions)
C: Loadrunner
CAD DCL
CAD Lisp
CFDG
CMake
COBOL
CSS
Ceylon
ChaiScript
Chapel
Clojure
Clone C
Clone C++
CoffeeScript
ColdFusion
Cuesheet
D
DCL
DCPU-16
DCS
DIV
DOT
Dart
Delphi
Delphi Prism (Oxygene)
Diff
E
ECMAScript
EPC
Easytrieve
Eiffel
Email
Erlang
Euphoria
F#
FO Language
Falcon
Filemaker
Formula One
Fortran
FreeBasic
FreeSWITCH
GAMBAS
GDB
GDScript
Game Maker
Genero
Genie
GetText
Go
Godot GLSL
Groovy
GwBasic
HQ9 Plus
HTML
HTML 5
Haskell
Haxe
HicEst
IDL
INI file
INTERCAL
IO
ISPF Panel Definition
Icon
Inno Script
J
JCL
JSON
Java
Java 5
JavaScript
Julia
KSP (Kontakt Script)
KiXtart
Kotlin
LDIF
LLVM
LOL Code
LScript
Latex
Liberty BASIC
Linden Scripting
Lisp
Loco Basic
Logtalk
Lotus Formulas
Lotus Script
Lua
M68000 Assembler
MIX Assembler
MK-61/52
MPASM
MXML
MagikSF
Make
MapBasic
Markdown (PRO members only)
MatLab
Mercury
MetaPost
Modula 2
Modula 3
Motorola 68000 HiSoft Dev
MySQL
Nagios
NetRexx
Nginx
Nim
NullSoft Installer
OCaml
OCaml Brief
Oberon 2
Objeck Programming Langua
Objective C
Octave
Open Object Rexx
OpenBSD PACKET FILTER
OpenGL Shading
Openoffice BASIC
Oracle 11
Oracle 8
Oz
PARI/GP
PCRE
PHP
PHP Brief
PL/I
PL/SQL
POV-Ray
ParaSail
Pascal
Pawn
Per
Perl
Perl 6
Phix
Pic 16
Pike
Pixel Bender
PostScript
PostgreSQL
PowerBuilder
PowerShell
ProFTPd
Progress
Prolog
Properties
ProvideX
Puppet
PureBasic
PyCon
Python
Python for S60
QBasic
QML
R
RBScript
REBOL
REG
RPM Spec
Racket
Rails
Rexx
Robots
Roff Manpage
Ruby
Ruby Gnuplot
Rust
SAS
SCL
SPARK
SPARQL
SQF
SQL
SSH Config
Scala
Scheme
Scilab
SdlBasic
Smalltalk
Smarty
StandardML
StoneScript
SuperCollider
Swift
SystemVerilog
T-SQL
TCL
TeXgraph
Tera Term
TypeScript
TypoScript
UPC
Unicon
UnrealScript
Urbi
VB.NET
VBScript
VHDL
VIM
Vala
Vedit
VeriLog
Visual Pro Log
VisualBasic
VisualFoxPro
WHOIS
WhiteSpace
Winbatch
XBasic
XML
XPP
Xojo
Xorg Config
YAML
YARA
Z80 Assembler
ZXBasic
autoconf
jQuery
mIRC
newLISP
q/kdb+
thinBasic
Paste Expiration:
Never
Burn after read
10 Minutes
1 Hour
1 Day
1 Week
2 Weeks
1 Month
6 Months
1 Year
Paste Exposure:
Public
Unlisted
Private
Folder:
(members only)
Password
NEW
Enabled
Disabled
Burn after read
NEW
Paste Name / Title:
Create New Paste
Hello
Guest
Sign Up
or
Login
Sign in with Facebook
Sign in with Twitter
Sign in with Google
You are currently not logged in, this means you can not edit or delete anything you paste.
Sign Up
or
Login
Public Pastes
✅💡 Free BTC method 🚨 🔥
JavaScript | 1 min ago | 0.20 KB
✅💡 MAKE $2500 IN 15 MIN ✅ Working 💵 💎
JavaScript | 18 min ago | 0.20 KB
✅ Crypto Swap Glitch ✅ Still works 💎 💵
JavaScript | 18 min ago | 0.20 KB
✅💡 Exchange profit method 🚨 🔥
JavaScript | 18 min ago | 0.20 KB
✅ EASY PROFIT GUIDE ✅ Still works 🔥 🚨
JavaScript | 18 min ago | 0.20 KB
✅💡 ChangeNOW Profit Exploit 💎 💵
JavaScript | 18 min ago | 0.20 KB
✅💡 Free BTC method 🚨 🔥
JavaScript | 18 min ago | 0.20 KB
✅💡 MAKE $2500 IN 15 MIN ✅ Working 💵 💎
JavaScript | 18 min ago | 0.20 KB
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the
Cookies Policy
.
OK, I Understand
Not a member of Pastebin yet?
Sign Up
, it unlocks many cool features!
