Create a new version of paste:

[    0.000000] Linux version 3.10.49 (jar@jar-virtual-machine) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r42068) ) #1 SMP Tue Aug 12 14:09:37 CEST 2014
[    0.000000] Detected Broadcom 0x6368 CPU revision b2
[    0.000000] CPU frequency is 400 MHz
[    0.000000] 64MB of RAM installed
[    0.000000] registering 38 GPIOs
[    0.000000] board_bcm963xx: Boot address 0xb8000000
[    0.000000] board_bcm963xx: CFE version: 1.0.37-110.11-1
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 0002a031 (Broadcom BMIPS4350)
[    0.000000] board: board name: 96368M-1541N
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 04000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x03ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x03ffffff]
[    0.000000] On node 0 totalpages: 16384
[    0.000000] free_area_init_node: node 0, pgdat 80329a00, node_mem_map 81000000
[    0.000000]   Normal zone: 128 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 16384 pages, LIFO batch:3
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes.
[    0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[    0.000000] PERCPU: Embedded 7 pages/cpu @81083000 s6624 r8192 d13856 u32768
[    0.000000] pcpu-alloc: s6624 r8192 d13856 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
[    0.000000] Kernel command line:  root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Memory: 61044k/65536k available (2593k kernel code, 4492k reserved, 655k data, 332k init, 0k highmem)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:256
[    0.028000] Calibrating delay loop... 397.82 BogoMIPS (lpj=795648)
[    0.032000] pid_max: default: 32768 minimum: 301
[    0.036000] Mount-cache hash table entries: 512
[    0.044000] SMP: Booting CPU1...
[    0.048000] CPU revision is: 0002a031 (Broadcom BMIPS4350)
[    0.048000] Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes.
[    0.048000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[    0.084000] Synchronize counters for CPU 1: done.
[    0.084000] SMP: CPU1 is running
[    0.088000] Brought up 2 CPUs
[    0.112000] NET: Registered protocol family 16
[    0.124000] registering PCI controller with io_map_base unset
[    0.144000] bio: create slab <bio-0> at 0
[    0.152000] PCI host bridge to bus 0000:00
[    0.156000] pci_bus 0000:00: root bus resource [mem 0x30000000-0x37ffffff]
[    0.160000] pci_bus 0000:00: root bus resource [io  0x8000000-0x800ffff]
[    0.164000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.168000] pci 0000:00:01.0: [14e4:a8d6] type 00 class 0x028000
[    0.168000] pci 0000:00:01.0: reg 10: [mem 0x00000000-0x00003fff]
[    0.180000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    0.180000] pci 0000:00:01.0: BAR 0: assigned [mem 0x30000000-0x30003fff]
[    0.184000] Switching to clocksource MIPS
[    0.196000] PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
[    0.204000] b43-pci-bridge 0000:00:01.0: setting latency timer to 64
[    0.228000] ssb: Found chip with id 0xA8D6, rev 0x00 and package 0x08
[    0.236000] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x1E, vendor 0x4243)
[    0.236000] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x10, vendor 0x4243)
[    0.236000] ssb: Core 2 found: PCI (cc 0x804, rev 0x0E, vendor 0x4243)
[    0.292000] ssb: Sonics Silicon Backplane found on PCI device 0000:00:01.0
[    0.300000] NET: Registered protocol family 2
[    0.308000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
[    0.316000] TCP bind hash table entries: 512 (order: 0, 4096 bytes)
[    0.320000] TCP: Hash tables configured (established 512 bind 512)
[    0.328000] TCP: reno registered
[    0.332000] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.336000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.344000] NET: Registered protocol family 1
[    0.348000] PCI: CLS 0 bytes, default 16
[    0.356000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.360000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.372000] msgmni has been set to 119
[    0.376000] io scheduler noop registered
[    0.380000] io scheduler deadline registered (default)
[    0.388000] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 10) is a bcm63xx_uart
[    0.396000] console [ttyS0] enabled, bootconsole disabled
[    0.408000] bcm63xx-rng bcm63xx-rng: registered RNG driver
[    0.416000] physmap platform flash device: 08000000 at 18000000
[    0.424000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x00227e
[    0.436000] Amd/Fujitsu Extended Query Table at 0x0040
[    0.440000]   Amd/Fujitsu Extended Query version 1.3.
[    0.444000] number of CFI chips: 1
[    0.448000] bcm63xxpart: CFE boot tag found with version 6 and board type 96368M-1541N
[    0.456000] bcm63xxpart: Partition 0 is CFE offset 0 and length 20000
[    0.464000] bcm63xxpart: Partition 1 is kernel offset 20100 and length 11ff00
[    0.472000] bcm63xxpart: Partition 2 is rootfs offset 140000 and length 1ea0000
[    0.480000] bcm63xxpart: Partition 3 is nvram offset 1fe0000 and length 20000
[    0.488000] bcm63xxpart: Partition 4 is linux offset 20000 and length 1fc0000
[    0.492000] bcm63xxpart: Spare partition is offset 520004 and length 1abfffc
[    0.500000] 5 bcm63xxpart partitions found on MTD device physmap-flash.0
[    0.508000] Creating 5 MTD partitions on "physmap-flash.0":
[    0.512000] 0x000000000000-0x000000020000 : "CFE"
[    0.520000] 0x000000020100-0x000000140000 : "kernel"
[    0.528000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.544000] 0x000000140000-0x000001fe0000 : "rootfs"
[    0.552000] mtd: device 2 (rootfs) set to be root filesystem
[    0.556000] mtd: partition "rootfs_data" created automatically, ofs=0x520000, len=0x1ac0000
[    0.568000] 0x000000520000-0x000001fe0000 : "rootfs_data"
[    0.576000] 0x000001fe0000-0x000002000000 : "nvram"
[    0.584000] 0x000000020000-0x000001fe0000 : "linux"
[    0.592000] bcm63xx-spi bcm63xx-spi: at 0xb0000800 (irq 9, FIFOs size 542)
[    0.644000] b53_common: found switch: BCM63xx, rev 0
[    0.652000] bcm63xx-wdt bcm63xx-wdt:  started, timer margin: 30 sec
[    0.664000] TCP: cubic registered
[    0.668000] NET: Registered protocol family 17
[    0.672000] 8021q: 802.1Q VLAN Support v1.8
[    0.688000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[    0.700000] Freeing unused kernel memory: 332K (8033d000 - 80390000)
[    3.840000] usbcore: registered new interface driver usbfs
[    3.844000] usbcore: registered new interface driver hub
[    3.852000] usbcore: registered new device driver usb
[    3.864000] Button Hotplug driver version 0.4.1
[    3.948000] SCSI subsystem initialized
[    3.968000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.976000] ehci-platform: EHCI generic platform driver
[    4.084000] ehci-platform ehci-platform: EHCI Host Controller
[    4.088000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[    4.096000] ehci-platform ehci-platform: irq 15, io mem 0xb0001500
[    4.116000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00, overcurrent ignored
[    4.124000] hub 1-0:1.0: USB hub found
[    4.128000] hub 1-0:1.0: 1 port detected
[    4.140000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.144000] ohci-platform ohci-platform: Generic Platform OHCI Controller
[    4.152000] ohci-platform ohci-platform: new USB bus registered, assigned bus number 2
[    4.160000] ohci-platform ohci-platform: irq 13, io mem 0xb0001600
[    4.228000] hub 2-0:1.0: USB hub found
[    4.232000] hub 2-0:1.0: 1 port detected
[    4.244000] uhci_hcd: USB Universal Host Controller Interface driver
[    4.272000] usbcore: registered new interface driver usb-storage
[    4.280000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
[    4.464000] usb 1-1: new high-speed USB device number 2 using ehci-platform
[    4.620000] usb-storage 1-1:1.0: USB Mass Storage device detected
[    4.628000] usb-storage 1-1:1.0: Quirks match for vid 05e3 pid 0702: 520
[    4.636000] scsi0 : usb-storage 1-1:1.0
[    4.916000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on port1, 100Mbps, full-duplex
[    4.924000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on port3, 100Mbps, full-duplex
[    5.644000] scsi 0:0:0:0: Direct-Access     Maxtor 6 Y160P0           0811 PQ: 0 ANSI: 0
[    5.660000] sd 0:0:0:0: [sda] 320173056 512-byte logical blocks: (163 GB/152 GiB)
[    5.668000] sd 0:0:0:0: [sda] Test WP failed, assume Write Enabled
[    5.676000] sd 0:0:0:0: [sda] Cache data unavailable
[    5.680000] sd 0:0:0:0: [sda] Assuming drive cache: write through
[    5.692000] sd 0:0:0:0: [sda] Test WP failed, assume Write Enabled
[    5.700000] sd 0:0:0:0: [sda] Cache data unavailable
[    5.708000] sd 0:0:0:0: [sda] Assuming drive cache: write through
[    5.728000]  sda: sda1 sda2 sda3
[    5.740000] sd 0:0:0:0: [sda] Test WP failed, assume Write Enabled
[    5.748000] sd 0:0:0:0: [sda] Cache data unavailable
[    5.752000] sd 0:0:0:0: [sda] Assuming drive cache: write through
[    5.760000] sd 0:0:0:0: [sda] Attached SCSI disk
[    9.020000] jffs2: notice: (290) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 23 of xref (0 dead, 6 orphan) found.
[    9.144000] jffs2: notice: (287) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 23 of xref (0 dead, 6 orphan) found.
[   12.848000] NET: Registered protocol family 10
[   13.496000] wl: module license 'unspecified' taints kernel.
[   13.504000] Disabling lock debugging due to kernel taint
[   13.616000] SSB/BCMA glue driver successfully attached
[   13.648000] BCMA8D6(00:01) using sprom version 8
[   13.672000] wl0: Broadcom BCMa8d6 802.11 Wireless Controller 5.10.56.27
[   13.796000] nf_conntrack version 0.5.0 (959 buckets, 3836 max)
[   13.824000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   13.864000] fuse init (API version 7.22)
[   13.880000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   13.960000] usbcore: registered new interface driver ums-alauda
[   13.972000] usbcore: registered new interface driver ums-cypress
[   13.980000] usbcore: registered new interface driver ums-datafab
[   13.992000] usbcore: registered new interface driver ums-freecom
[   14.004000] usbcore: registered new interface driver ums-isd200
[   14.012000] usbcore: registered new interface driver ums-jumpshot
[   14.024000] usbcore: registered new interface driver ums-karma
[   14.036000] usbcore: registered new interface driver ums-sddr09
[   14.044000] usbcore: registered new interface driver ums-sddr55
[   14.056000] usbcore: registered new interface driver ums-usbat
[   14.068000] usbcore: registered new interface driver usblp
[   14.108000] xt_time: kernel timezone is -0000
[   14.132000] PPP generic driver version 2.4.2
[   14.140000] NET: Registered protocol family 24
[   17.248000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on port1, 100Mbps, full-duplex
[   17.256000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on port3, 100Mbps, full-duplex
[   19.852000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on port1, 100Mbps, full-duplex
[   19.860000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on port3, 100Mbps, full-duplex
[   19.892000] device eth0.1 entered promiscuous mode
[   19.896000] device eth0 entered promiscuous mode
[   19.908000] br-lan: port 1(eth0.1) entered forwarding state
[   19.912000] br-lan: port 1(eth0.1) entered forwarding state
[   21.916000] br-lan: port 1(eth0.1) entered forwarding state
[   25.432000] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem
[   25.496000] EXT4-fs (sda2): warning: mounting unchecked fs, running e2fsck is recommended
[   25.508000] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null)
[   25.532000] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem
[   25.576000] EXT4-fs (sda3): warning: mounting unchecked fs, running e2fsck is recommended
[   25.584000] EXT4-fs (sda3): mounted filesystem without journal. Opts: (null)
[   25.616000] Adding 1051228k swap on /dev/sda1.  Priority:-1 extents:1 across:1051228k 
[  195.416000] Algorithmics/MIPS FPU Emulator v1.5