Pastebin
API
tools
faq
paste
Login
Sign up
Please fix the following errors:
New Paste
Syntax Highlighting
cat proc/last_kmsg [ 0.000000] [0: swapper: 0] Booting Linux on physical CPU 0 [ 0.000000] [0: swapper: 0] Initializing cgroup subsys cpu [ 0.000000] [0: swapper: 0] Linux version 3.0.101-slim-gebbc292 (nospamdan@Mint17Build) (gcc version 4.8 (GCC) ) #1 SMP PREEMPT Sun Nov 29 12:12:19 EST 2015 [ 0.000000] [0: swapper: 0] CPU: ARMv7 Processor [510f02d2] revision 2 (ARMv7), cr=10c5387d [ 0.000000] [0: swapper: 0] CPU: VIPT nonaliasing data cache, VIVT ASID tagged instruction cache [ 0.000000] [0: swapper: 0] Machine: QCT MSM8X60 FUSION FFA [ 0.000000] [0: swapper: 0] memory pool 0 (start 38000000 size 600000) initialized [ 0.000000] [0: swapper: 0] memory pool 1 (start 38600000 size 3802000) initialized [ 0.000000] [0: swapper: 0] memory pool 3 (start 78f00000 size 7100000) initialized [ 0.000000] [0: swapper: 0] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] [0: swapper: 0] socinfo_init: v6, id=86, ver=2.0, raw_id=1697, raw_ver=1697, hw_plat=0, hw_plat_ver=65536 [ 0.000000] [0: swapper: 0] accessory_chip=0 hw_plat_subtype=0 [ 0.000000] [0: swapper: 0] sec_getlog_supply_meminfo: 40000000 40000000 0 0 [ 0.000000] [0: swapper: 0] allocating 12906496 bytes at c1ced000 (420ed000 physical) for fb [ 0.000000] [0: swapper: 0] PERCPU: Embedded 8 pages/cpu @c293f000 s9696 r8192 d14880 u32768 [ 0.000000] [0: swapper: 0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 209160 [ 0.000000] [0: swapper: 0] Kernel command line: androidboot.hardware=qcom usb_id_pin_rework=true no_console_suspend=true androidboot.selinux=permissive sec_log=0x8000 0@0x40184008 sec_dbg=0x100000@0x4020400c sec_debug.reset_reason=0x1a2b3c00 console=null sec_debug.enable=0 sec_debug.enable_user=0 vmalloc=432m hw_rev=13 androidboot.emmc=true andr oidboot.serialno=f3ae2762 androidboot.baseband=csfb [ 0.000000] [0: swapper: 0] (sec_dbg_setup) [ 0.000000] [0: swapper: 0] (sec_dbg_setup) sec_dbg_buf_base = 0x4020400c [ 0.000000] [0: swapper: 0] (sec_dbg_setup) sec_dbg_buf_size = 0x100000 [ 0.000000] hw_rev_setup : HW rev value is intialized first [ 0.000000] HW rev value : 0xD [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 43MB 760MB 22MB = 825MB total [ 0.000000] Memory: 802524k/802524k available, 159012k reserved, 419840K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB) [ 0.000000] vmalloc : 0xdf800000 - 0xfa000000 ( 424 MB) [ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .init : 0xc0008000 - 0xc004c000 ( 272 kB) [ 0.000000] .text : 0xc0100000 - 0xc0b77f64 (10720 kB) [ 0.000000] .data : 0xc0c00000 - 0xc0cf2388 ( 969 kB) [ 0.000000] .bss : 0xc0cf23ac - 0xc1352d48 (6531 kB) [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:855 [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms [ 0.150207] Calibrating delay using timer specific routine.. 13.53 BogoMIPS (lpj=67655) [ 0.150238] pid_max: default: 32768 minimum: 301 [ 0.150604] Security Framework initialized [ 0.150634] SELinux: Initializing. [ 0.150939] Mount-cache hash table entries: 512 [ 0.152374] Initializing cgroup subsys cpuacct [ 0.152465] Initializing cgroup subsys freezer [ 0.152557] CPU: Testing write buffer coherency: ok [ 0.152893] hw perfevents: enabled with ARMv7 Scorpion-MP PMU driver, 5 counters available [ 0.185546] CPU1: Booted secondary processor [ 0.195434] Brought up 2 CPUs [ 0.195434] SMP: Total of 2 processors activated (27.06 BogoMIPS). [ 0.210571] print_constraints: dummy: [ 0.210693] rdev_init_debugfs: Error-Bad Function Input [ 0.211029] NET: Registered protocol family 16 [ 0.211242] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver [ 0.213317] (sec_get_lpm_mode) 1a2b3c00 [ 0.213317] (sec_get_lpm_mode) 0 [ 0.213348] (sec_debug_init) [ 0.213348] (sec_debug_init) reset_reason : 0x1a2b3c00 [ 0.213378] msm_rpm_init: RPM firmware 2.0.4196187 [ 0.214172] saw_probe: id=0, name=8901_s0 [ 0.214630] saw_probe: id=1, name=8901_s1 [ 0.216278] rcg_clk_handoff: gsbi12_uart_clk rate=3686400 [ 0.216308] rcg_clk_handoff: gsbi12_qup_clk rate=24000000 [ 0.216339] rcg_clk_handoff: sdc1_clk rate=48000000 [ 0.216400] rcg_clk_handoff: dsi_byte_clk rate=1 [ 0.216461] rcg_clk_handoff: mdp_clk rate=200000000 [ 0.216583] rcg_clk_handoff: pixel_mdp_clk rate=27400000 [ 0.218627] Max ACPU freq: 1512000 KHz [ 0.224426] CPU0: 23 scaling frequencies supported. [ 0.224456] CPU1: 23 scaling frequencies supported. [ 0.224975] LTE_switch_init! [ 0.225036] LTE_switch_init end! [ 0.226501] pm8058_probe: PMIC revision: E3 [ 0.227783] pm_gpio_probe: OK: base=173, ngpio=40 [ 0.227996] pm8xxx_mpp_probe: OK: base=213, ngpio=12 [ 0.229339] pm8901_probe: PMIC REVISION = F4 [ 0.229766] pm8xxx_mpp_probe: OK: base=225, ngpio=4 [ 0.244476] ram_console: got buffer at 77800000, size 100000 [ 0.244567] ram_console: found existing buffer, size 523607, start 523607 [ 1.779907] console [ram-1] enabled [ 1.781524] pm8058_gpios_init PMIC_GPIO_EAR_DET : OK [ 1.782196] msm_snddev_init [ 1.782684] msm_snddev_init snd_devices_celox - config [ 1.793090] [TSP] Power Down S to discharge for unexpected leackage current [ 1.793701] [TKEY] tkey_device_init: 8901_lvs2 On [ 1.794281] [TKEY] tkey_device_init: TKEY_L12 3.3 V Set [ 1.794433] brcm_wlan_init: start [ 1.794555] brcm_init_wlan_mem: WIFI MEM Allocated [ 1.813537] bio: create slab <bio-0> at 0 [ 1.815002] ION heap vmalloc created [ 1.815155] ION heap mm created at 38800000 with size 3600000 [ 1.815307] ION heap mm_fw created at 38600000 with size 200000 [ 1.815429] ION heap mfc created at 3be00000 with size 2000 [ 1.815612] ION heap sf created at 78f00000 with size 4000000 [ 1.815704] ION heap camera_preview created at 7cf00000 with size 1200000 [ 1.815887] ION heap wb created at 7e100000 with size 1400000 [ 1.815979] ION heap qsecom created at 7f500000 with size 600000 [ 1.816162] ION heap audio created at 7fb00000 with size 4cf000 [ 1.816436] pmic8058_pwm_probe: OK [ 1.817169] SCSI subsystem initialized [ 1.817443] usbcore: registered new interface driver usbfs [ 1.817596] usbcore: registered new interface driver hub [ 1.817840] usbcore: registered new device driver usb [ 1.818328] i2c-gpio i2c-gpio.15: using pins 107 (SDA) and 101 (SCL) [ 1.818634] i2c-gpio i2c-gpio.10: using pins 138 (SDA) and 139 (SCL) [ 1.818878] i2c-gpio i2c-gpio.13: using pins 156 (SDA) and 157 (SCL) [ 1.819213] i2c-gpio i2c-gpio.11: using pins 38 (SDA) and 39 (SCL) [ 1.819549] i2c-gpio i2c-gpio.12: using pins 51 (SDA) and 52 (SCL) [ 1.819793] i2c-gpio i2c-gpio.17: using pins 70 (SDA) and 94 (SCL) [ 1.820159] i2c-gpio i2c-gpio.9: using pins 155 (SDA) and 154 (SCL) [ 1.820526] Advanced Linux Sound Architecture Driver Version 1.0.24. [ 1.821105] Bluetooth: Core ver 2.16 [ 1.821228] NET: Registered protocol family 31 [ 1.821319] Bluetooth: HCI device and connection manager initialized [ 1.821472] Bluetooth: HCI socket layer initialized [ 1.821533] Bluetooth: L2CAP socket layer initialized [ 1.821838] Bluetooth: SCO socket layer initialized [ 1.822387] cfg80211: Calling CRDA to update world regulatory domain [ 1.822753] Switching to clocksource gp_timer [ 1.841583] NET: Registered protocol family 2 [ 1.841857] IP route cache hash table entries: 16384 (order: 4, 65536 bytes) [ 1.842254] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 1.843200] TCP bind hash table entries: 65536 (order: 8, 1310720 bytes) [ 1.844268] TCP: Hash tables configured (established 65536 bind 65536) [ 1.844360] TCP reno registered [ 1.844451] UDP hash table entries: 256 (order: 1, 12288 bytes) [ 1.844604] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes) [ 1.845092] NET: Registered protocol family 1 [ 1.845550] RPC: Registered named UNIX socket transport module. [ 1.845611] RPC: Registered udp transport module. [ 1.845764] RPC: Registered tcp transport module. [ 1.845855] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.846191] Trying to unpack rootfs image as initramfs... [ 1.885681] Freeing initrd memory: 936K [ 1.886138] PMU: registered new PMU device of type 0 [ 1.886444] PMU: registered new PMU device of type 1 [ 1.886901] ETM/ETB intialized. [ 1.887176] pil_qdsp6v3 pil_qdsp6v3: using secure boot [ 1.887695] pil_modem pil_modem: using secure boot [ 1.888000] sdio_al:SDIO-AL SW version 1.30 [ 1.890960] smd_channel_probe_worker: allocation table not initialized [ 1.897216] msm_dsps driver version 3.03. [ 1.903167] lpa_if_init: lpa_if_ptr 0xdea61e00 buf_vir 0xffdf0000 buf_phy 0x5e590000 buf_zise 65536 [ 1.904052] dspcrashd_probe: Platform driver values: Base = 0x46700000, Size = 0x2000000,pdata = 0xdeaddead [ 1.905670] sec_switch_probe enter sec_switch_probe [ 1.906433] charm_modem_probe: Registering charm modem [ 1.908691] msm_rpm_log_probe: OK [ 1.908996] [BT] bcm4330_bluetooth_init [ 1.909454] [BT] bcm4330_bluetooth_probe [ 1.909851] printk_remap_nocache: sec_log_save_size 524288 at sec_log_save_base 0x40184008 [ 1.910003] printk_remap_nocache: sec_log_reserve_size 524296 at sec_log_reserve_base 0x40184000 [ 1.959381] sec_log_save_old: saved old log at 262144@deb80000 [ 1.963745] sec_getlog_supply_kloginfo: 0xc112a418 [ 1.963958] audit: initializing netlink socket (disabled) [ 1.964111] type=2000 audit(1.940:1): initialized [ 2.048950] highmem bounce pool size: 64 pages [ 2.049194] ashmem: initialized [ 2.055053] exFAT: Core Version 1.2.4 [ 2.055145] exFAT: FS Version 1.2.4 [ 2.057006] NTFS driver 2.1.30 [Flags: R/W]. [ 2.057403] fuse init (API version 7.16) [ 2.058105] msgmni has been set to 749 [ 2.058227] SELinux: Registering netfilter hooks [ 2.060058] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 2.060150] io scheduler noop registered [ 2.060333] io scheduler deadline registered (default) [ 2.060424] io scheduler row registered [ 2.060577] io scheduler cfq registered [ 2.063079] mdp4_csc_config: Block type 10 isn't supported by CSC. [ 2.063201] mdp4_csc_config: Block type 8 isn't supported by CSC. [ 2.067413] ld9040 start lcdc_ld9040_panel_init [ 2.067596] ld9040 start ld9040_probe: pdev->name:lcdc_ld9040_wvga [ 2.067749] ld9040 msm_fb_add_device START [ 2.067840] setting pdata->panel_info.fb_num to 3. type: 0 [ 2.068023] msm_fb_add_device: msm_fb_device_alloc failed! [ 2.068115] ld9040 msm_fb_add_device end [ 2.068603] ld9040 platform_driver_register(&this_driver) is done [ 2.068786] ld9040 LDI : EA8868, pixelclock 27400000 [ 2.069152] setting pdata->panel_info.fb_num to 3. type: 3 [ 2.072113] mdp4_lcdc_vsync_init: ndx=0 [ 2.074493] FrameBuffer[0] 480x800 size=4608000 bytes is registered successfully! [ 2.074676] is_lpcharging_state: is_lpm_boot:0 [ 2.074768] pm_runtime: fail to wake up [ 2.074951] [kmj] lcdc_LD9040_panel_power:enable:1 [ 2.076171] ld9040 lcdc_ld9040_panel_on + (0,0,0) [ 2.076263] ld9040 : lcdc_config_gpios [1] [ 2.076416] ld9040 start spi_init [ 2.076507] ld9040 clk : 103, cs : 104, sdi : 106 [ 2.076690] ld9040 start ld9040_disp_powerup [ 2.133026] ld9040 start ld9040_disp_on - HW Rev: 13 [ 2.263732] ld9040 ld9040_read_lcd_id: a1 3 22 [ 2.263885] ld9040 lcd EA8868 M3 [ 2.327331] ld9040 ACL_cutoff_set Percentage : 40!! [ 2.328765] ld9040 ea8868_gamma_ctl 18 18 [ 2.329010] ld9040 lcdc_ld9040_panel_on - (1,1,1) [ 2.330535] mdp4_csc_config: Block type 10 isn't supported by CSC. [ 2.330688] mdp4_csc_config: Block type 8 isn't supported by CSC. [ 2.333892] load_565rle_image: Can not open /initlogo.rle [ 2.334381] Registered led device: lcd-backlight [ 2.334503] mdp4_lcdc_vsync_init: ndx=0 [ 2.334716] sec_getlog_supply_fbinfo: 0x420ed000 480 800 32 2 [ 2.334808] ld9040 platform_device_register(&this_device) is done [ 2.335388] hdmi_msm hdmi_msm.0: probe [ 2.335998] hdmi_msm hdmi_msm.1: probe [ 2.336120] hdmi_msm hdmi_msm.1: Features <val:0x80004481, HDMI:ON, HDCP:ON> [ 2.336425] setting pdata->panel_info.fb_num to 1. type: 7 [ 2.337188] mdp4_dtv_vsync_init: ndx=0 [ 2.339355] FrameBuffer[1] 1920x1080 size=4149248 bytes is registered successfully! [ 2.339752] mdp4_dtv_vsync_init: ndx=0 [ 2.340026] hdmi_msm hdmi_msm.1: external_common_state_create: sysfs group de37bc08 [ 2.340148] hdmi_msm hdmi_msm.1: external_common_state_create: kobject_uevent(KOBJ_ADD) [ 2.340332] hdmi_msm hdmi_msm.1: hdmi_msm_config_hdcp_feature: HDCP Feature: Enabled [ 2.340667] hdmi_msm_init: success: DEBUG AUDIO EDID HPD HDCP DVI:0 [ 2.341766] [ 2.341796] msm_vidc_enc: Inside vid_enc_init() [ 2.342224] [ 2.342224] msm_vidc_enc: Inside vid_enc_vcd_init() [ 2.342498] is_lpcharging_state: is_lpm_boot:0 [ 2.342834] mhl_v2, Board : get_mhl_int_irq, rev:13 [ 2.343139] create mhl sysfile [ 2.343627] input: sii9234_rcp as /devices/virtual/input/input0 [ 2.344482] msm_serial_hs.0: ttyHS0 at MMIO 0x16540000 (irq = 188) is a MSM HS UART [ 2.345031] msm_serial_hs module loaded [ 2.345214] msm_serial_hsl: detected port #1 [ 2.345367] msm_serial_hsl.1: ttyHSL1 at MMIO 0x19940000 (irq = 221) is a MSM [ 2.345733] msm_serial_hsl: detected port #0 [ 2.345886] msm_serial_hsl.0: ttyHSL0 at MMIO 0x19c40000 (irq = 227) is a MSM [ 2.346374] msm_serial_hsl: driver initialized [ 2.347412] msm_rotator_probe: rotator_hw_revision=1 [ 2.353240] kgsl kgsl-3d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU [ 2.354736] kgsl kgsl-2d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU [ 2.355804] kgsl kgsl-2d1: |kgsl_gpummu_init| MMU type set for device is GPUMMU [ 2.362091] brd: module loaded [ 2.364990] loop: module loaded [ 2.365447] is_lpcharging_state: is_lpm_boot:0 [ 2.365661] ak8975 probe start! [ 2.366760] sensor_power_on_vdd: vdd_2p85=1, vdd_1p8=1, vdd_2p_4=0, vdd_2p85_mag=0 [ 2.367736] ak8975 probe success! [ 2.367889] is_lpcharging_state: is_lpm_boot:0 [ 2.368041] k3dh probe start!! [ 2.368194] sensor_power_on_vdd: vdd_2p85=2, vdd_1p8=2, vdd_2p_4=0, vdd_2p85_mag=0 [ 2.368560] k3dh probe success!! [ 2.368865] sec_jack:sec_jack_probe : Registering jack driver [ 2.369110] input: sec_jack as /devices/virtual/input/input1 [ 2.370117] pm8xxx_upl_probe: OK [ 2.371093] QSEECOM: qseecom_init: Failed to retrieve QSEE version information -22 [ 2.371551] [VIBETONZ:WJYOO] MISC_REGISTER nRet = 0 [ 2.371948] THNAK YOU!! [ 2.372100] vibrator I2C attach success!!! [ 2.372314] [VIBETONZ] ImmVibeSPI_ForceOut_Initialize [ 2.385406] [VIBETONZ] ImmVibeSPI_ForceOut_AmpDisable [ 2.386383] is_lpcharging_state: is_lpm_boot:0 [ 2.386566] a2220_init [ 2.386810] i2c-core: driver [audience_a2220] using legacy suspend method [ 2.386993] i2c-core: driver [audience_a2220] using legacy resume method [ 2.387268] level device init [ 2.392456] audience_a2220 :a2220_ioctl : lsj:: a2220_firmware_buf = 78664 [ 2.392547] audience_a2220 :a2220_ioctl: creating thread.. [ 2.392822] init_a2220 - [ 2.392944] adie_codec_register_codec_operations: codec type 1 [ 2.393676] Loading pn544 driver [ 2.393890] pn544_probe : IRQ num 628 [ 2.394104] pn544_probe : requesting IRQ 628 [ 2.394226] audience_a2220 :a2220_init_thread [ 2.403717] SCSI Media Changer driver v0.25 [ 2.404205] PPP generic driver version 2.4.2 [ 2.404449] PPP Deflate Compression module registered [ 2.404602] PPP BSD Compression module registered [ 2.405334] PPP MPPE Compression module registered [ 2.405517] NET: Registered protocol family 24 [ 2.405609] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled). [ 2.405792] CSLIP: code copyright 1989 Regents of the University of California. [ 2.406372] tun: Universal TUN/TAP device driver, 1.6 [ 2.406494] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 2.407379] smsc911x: Driver version 2008-10-21 [ 2.407714] usbcore: registered new interface driver asix [ 2.407867] usbcore: registered new interface driver cdc_ether [ 2.407989] usbcore: registered new interface driver net1080 [ 2.408203] usbcore: registered new interface driver cdc_subset [ 2.408325] usbcore: registered new interface driver zaurus [ 2.408508] cdc_ncm: 04-Aug-2011 [ 2.408630] usbcore: registered new interface driver cdc_ncm [ 2.408752] rmnet_init: SMD devices[8] [ 2.423187] rmnet_init: SDIO devices[8] [ 2.425964] msm_hsusb_smb328a_vbus_power attached 0 [ 2.428100] msm_otg msm_otg: success to host_notify_dev_register [ 2.428466] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.428894] host driver registered w/ tranceiver [ 2.429199] usbcore: registered new interface driver cdc_acm [ 2.429321] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 2.429534] usbcore: registered new interface driver usblp [ 2.429687] Initializing USB Mass Storage driver... [ 2.429840] usbcore: registered new interface driver usb-storage [ 2.430023] USB Mass Storage support registered. [ 2.430145] usbcore: registered new interface driver ums-alauda [ 2.430358] usbcore: registered new interface driver ums-cypress [ 2.430480] usbcore: registered new interface driver ums-datafab [ 2.430694] usbcore: registered new interface driver ums-freecom [ 2.430816] usbcore: registered new interface driver ums-isd200 [ 2.431030] usbcore: registered new interface driver ums-jumpshot [ 2.431152] usbcore: registered new interface driver ums-karma [ 2.431365] usbcore: registered new interface driver ums-onetouch [ 2.431518] usbcore: registered new interface driver ums-sddr09 [ 2.431701] usbcore: registered new interface driver ums-sddr55 [ 2.431854] usbcore: registered new interface driver ums-usbat [ 2.432067] usbcore: registered new interface driver usb_ehset_test [ 2.432434] peripheral driver registered w/ tranceiver [ 2.432647] msm_otg_sm_work 1798 id=0 OTG_STATE_UNDEFINED [ 2.434844] android_usb gadget: Mass Storage Function, version: 2009/09/11 [ 2.435028] android_usb gadget: Number of LUNs=2 [ 2.435119] lun0: LUN: removable file: (no medium) [ 2.435272] lun1: LUN: removable file: (no medium) [ 2.435607] android_usb gadget: android_usb ready [ 2.437408] DIAG registered SDIO device [ 2.437652] diagchar initialized now [ 2.437988] mousedev: PS/2 mouse device common for all mice [ 2.439544] input: ffa-keypad as /devices/platform/msm_ssbi.0/pm8058-core/pm8xxx-keypad/input/input2 [ 2.440185] is_lpcharging_state: is_lpm_boot:0 [ 2.440338] [TSP] mxt224_probe [ 2.440551] input: sec_touchscreen as /devices/virtual/input/input3 [ 2.440826] mxt224_power_on: enter [ 2.441345] [TSP POWER ON L1 3.3 enable [ 2.441833] [TSP POWER ON L4 1.8 enable [ 2.442016] mxt224_power_on: exit [ 2.493164] mxt224_power_on is finished [ 2.506774] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init + [ 2.534484] qt602240_ts 0-004a: family = 0x81, variant = 0x1, version = 0x10, build = 170 [ 2.534667] [TSP] family = 0x81, variant = 0x1, version = 0x10, build = 170 [ 2.559082] [TSP] TSP chip is MXT224-E [ 2.559783] [TSP]user_info_value is 0 [ 2.563293] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 1 [ 2.563568] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 2 [ 2.564727] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 3 [ 2.564910] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 4 [ 2.565032] a2220_bootup_init: starting to load image (2459 passes)... [ 2.653228] msm_otg_sm_work 1801 id=1 OTG_STATE_UNDEFINED [ 2.653350] [OTG] msm_otg_start_peripheral, on = 1 [ 2.663208] [TSP] ta_status is 0 [ 2.663330] [TSP] mxt224_ta_probe [ 2.671905] [TSP]TA_probe MXT224E T48 Byte2 is 114 [ 2.674224] [TSP]calibration success!!! [ 2.674713] [TSP] mxt224_probe e [ 2.675201] input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8058-core/pm8xxx-pwrkey/input/input4 [ 2.675506] [sweep2wake]: set device pmic8xxx_pwrkey [ 2.675872] [TSP] Calibration End!!!!!! [ 2.675964] [TSP] Clearing unused slots [ 2.677734] using rtc device, pm8xxx_rtc, for alarms [ 2.677917] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0 [ 2.678436] i2c /dev entries driver [ 2.679077] [TSP] Calibration End!!!!!! [ 2.679168] [TSP] Clearing unused slots [ 2.680297] is_lpcharging_state: is_lpm_boot:0 [ 2.680450] yda165:yda165_init [ 2.680603] yda165:yda165_probe [ 2.680694] yda165:yda165_probe [ 2.680847] yda165_probe: OK [ 2.681030] yda165:load_ampgain completed [ 2.681243] is_lpcharging_state: is_lpm_boot:0 [ 2.681579] sensor_power_on_vdd: vdd_2p85=3, vdd_1p8=3, vdd_2p_4=0, vdd_2p85_mag=0 [ 2.681854] input: proximity_sensor as /devices/virtual/input/input5 [ 2.682189] opt_i2c_probe(839): [ 2.682281] opt_i2c_probe, 840 : start!!! [ 2.682373] GP2A opt i2c attach success!!! [ 2.682525] GP2A opt i2c attach success!!! [ 2.682647] opt_i2c_probe, 859 : end!!! [ 2.682861] opt_i2c_client : (0xdea8bc00) [ 2.683624] opt_i2c_write(497): : 0x4, 0x2 [ 2.683715] gp2a_opt_probe is OK!! [ 2.684387] is_lpcharging_state: is_lpm_boot:0 [ 2.685333] input: light_sensor as /devices/virtual/input/input6 [ 2.685913] input: fsa9480 as /devices/i2c-5/5-0025/input/input7 [ 2.688781] fsa9480 5-0025: fsa9480_reg_init dev ID: 0x0 [ 2.688995] i2c-core: driver [fsa9480] using legacy resume method [ 2.689208] is_lpcharging_state: is_lpm_boot:0 [ 2.689331] [GYRO] k3g_probe start! [ 2.689514] sensor_power_on_vdd: vdd_2p85=4, vdd_1p8=4, vdd_2p_4=0, vdd_2p85_mag=0 [ 2.690063] input: gyro_sensor as /devices/virtual/input/input8 [ 2.691406] input: orientation_sensor as /devices/virtual/input/input9 [ 2.691772] lirc_dev: IR Remote Control driver registered, major 239 [ 2.691925] IR NEC protocol handler initialized [ 2.692016] IR RC5(x) protocol handler initialized [ 2.692199] IR RC6 protocol handler initialized [ 2.692291] IR JVC protocol handler initialized [ 2.692443] IR Sony protocol handler initialized [ 2.692565] IR RC5 (streamzap) protocol handler initialized [ 2.692718] IR LIRC bridge handler initialized [ 2.692810] Linux video capture interface: v2.00 [ 2.692993] usbcore: registered new interface driver uvcvideo [ 2.693176] USB Video Class driver (v1.1.0) [ 2.694183] is_lpcharging_state: is_lpm_boot:0 [ 2.694458] ############# M5MO probe ############## [ 2.694702] [M5MO] m5mo_sensor_probe : E [ 2.694824] [M5MO] m5mo_i2c_init : E [ 2.695007] [M5MO] m5mo_i2c_probe : E [ 2.695098] [M5MO] m5mo_i2c_probe : m5mo_i2c_probe X [ 2.695129] [ 2.696319] is_lpcharging_state: is_lpm_boot:0 [ 2.696563] ############# S5K5BAFX probe ############## [ 2.697052] [5BAFX] s5k5bafx_sensor_probe : E [ 2.697265] [5BAFX] s5k5bafx_i2c_init : E [ 2.697387] [5BAFX] s5k5bafx_i2c_probe : E [ 2.697570] [5BAFX] s5k5bafx_i2c_probe : X [ 2.697753] [5BAFX] s5k5bafx_sensor_probe:1370:rc = 0 [ 2.698669] [Torch] ledflash_init [ 2.699096] I2C radio driver for Qualcomm FM Radio Transceiver , Version 1.0.0 [ 2.699523] max17040_probe: MAX17043 driver Loading! [ 2.699707] max17040_get_version : [ 2.700622] max17040 15-0036: MAX17040 Fuel-Gauge Ver 03 [ 2.701507] max17040_get_rcomp : current rcomp = 0xc71f(199) [ 2.702880] max17040_get_rcomp : current rcomp = 0xc71f(199) [ 2.706604] i2c-core: driver [max17040] using legacy suspend method [ 2.706787] i2c-core: driver [max17040] using legacy resume method [ 2.707031] smb328a_probe: SMB328A driver Loading! [ 2.707122] is_lpcharging_state: is_lpm_boot:0 [ 2.710418] i2c-core: driver [smb328a] using legacy suspend method [ 2.710571] i2c-core: driver [smb328a] using legacy resume method [ 2.711242] msm_adc successfully registered [ 2.712005] tsens_tm_probe: OK [ 2.712219] [TSP] Calibration!!!!!! [ 2.712463] pm8xxx_init_adc: adc_channel_open() failed. [ 2.712707] pm8xxx_tm_probe: Unable to initialize adc [ 2.712829] pm8xxx-tm: probe of pm8xxx-tm failed with error -9 [ 2.713378] pm8xxx_tm_probe: OK [ 2.714019] device-mapper: uevent: version 1.0.3 [ 2.714416] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com [ 2.714660] Bluetooth: HCI UART driver ver 2.2 [ 2.714813] Bluetooth: HCI H4 protocol initialized [ 2.714904] Bluetooth: HCI_IBS protocol initialized [ 2.715026] Bluetooth: BlueSleep Mode Driver Ver 1.1 [ 2.715759] cpuidle: using governor ladder [ 2.715850] cpuidle: using governor menu [ 2.716400] mmc0: mci-version: 0 [ 2.716583] mmc0: No card detect facilities available [ 2.716979] mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma 18 dmacrcri 1 [ 2.717163] mmc0: 8 bit data mode enabled [ 2.717254] mmc0: 4 bit data mode disabled [ 2.717407] mmc0: polling status mode disabled [ 2.717529] mmc0: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz [ 2.717681] mmc0: Slot eject status = 0 [ 2.717773] mmc0: Power save feature enable = 1 [ 2.717864] mmc0: DM non-cached buffer at ffda0000, dma_addr 0x5d8e0000 [ 2.718048] mmc0: DM cmd busaddr 0x5d8e0000, cmdptr busaddr 0x5d8f7f40 [ 2.718444] mmc1: mci-version: 0 [ 2.718933] mmc1: Qualcomm MSM SDCC-core at 0x0000000012140000 irq 135,0 dma 19 dmacrcri 4 [ 2.719116] mmc1: 8 bit data mode enabled [ 2.719207] mmc1: 4 bit data mode disabled [ 2.719299] mmc1: polling status mode disabled [ 2.719451] mmc1: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz [ 2.719573] mmc1: Slot eject status = 0 [ 2.719726] mmc1: Power save feature enable = 1 [ 2.719818] mmc1: DM non-cached buffer at ffd80000, dma_addr 0x5d900000 [ 2.720001] mmc1: DM cmd busaddr 0x5d900000, cmdptr busaddr 0x5d917f40 [ 2.720367] mmc2: mci-version: 0 [ 2.721008] mmc2: Qualcomm MSM SDCC-core at 0x0000000012180000 irq 134,642 dma 20 dmacrcri 2 [ 2.721191] mmc2: 8 bit data mode disabled [ 2.721282] mmc2: 4 bit data mode enabled [ 2.721374] mmc2: polling status mode disabled [ 2.721466] mmc2: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz [ 2.721649] mmc2: Slot eject status = 1 [ 2.721740] mmc2: Power save feature enable = 1 [ 2.721832] mmc2: DM non-cached buffer at ffd60000, dma_addr 0x5d920000 [ 2.722015] mmc2: DM cmd busaddr 0x5d920000, cmdptr busaddr 0x5d937f40 [ 2.722412] mmc3: mci-version: 0 [ 2.722595] mmc3: No card detect facilities available [ 2.722869] mmc3: Qualcomm MSM SDCC-core at 0x00000000121c0000 irq 133,0 dma 21 dmacrcri 5 [ 2.723052] mmc3: 8 bit data mode disabled [ 2.723144] mmc3: 4 bit data mode enabled [ 2.723358] mmc3: polling status mode disabled [ 2.723449] mmc3: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz [ 2.723602] mmc3: Slot eject status = 0 [ 2.723693] mmc3: Power save feature enable = 1 [ 2.723815] mmc3: DM non-cached buffer at ffd40000, dma_addr 0x5d940000 [ 2.723968] mmc3: DM cmd busaddr 0x5d940000, cmdptr busaddr 0x5d957f40 [ 2.724395] mmc4: mci-version: 0 [ 2.724884] mmc4: Qualcomm MSM SDCC-core at 0x0000000012200000 irq 220,0 dma 21 dmacrcri 14 [ 2.725067] mmc4: 8 bit data mode disabled [ 2.725158] mmc4: 4 bit data mode enabled [ 2.725250] mmc4: polling status mode disabled [ 2.725433] mmc4: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz [ 2.725524] mmc4: Slot eject status = 0 [ 2.725677] mmc4: Power save feature enable = 1 [ 2.725769] mmc4: DM non-cached buffer at ffd20000, dma_addr 0x5d960000 [ 2.725952] mmc4: DM cmd busaddr 0x5d960000, cmdptr busaddr 0x5d977f40 [ 2.726806] Registered led device: camera:flash0 [ 2.727050] Registered led device: camera:flash1 [ 2.728973] usbcore: registered new interface driver usbhid [ 2.729064] usbhid: USB HID core driver [ 2.729644] logger: created 512K log 'log_main' [ 2.729827] logger: created 256K log 'log_events' [ 2.730072] logger: created 512K log 'log_radio' [ 2.730255] logger: created 256K log 'log_system' [ 2.730346] sec_getlog_supply_loggerinfo: 0xc11c61c0 0xc12461c0 0xc12c61c0 0xc13061c0 [ 2.731658] zram: Created 2 device(s) ... [ 2.732086] usbcore: registered new interface driver snd-usb-audio [ 2.733398] msm-cpu-dai msm-cpu-dai.0: asoc_msm_cpu_probe: dev name msm-cpu-dai.0 [ 2.733825] msm-codec-dai msm-codec-dai.0: asoc_msm_codec_probe: dev name msm-codec-dai.0 [ 2.734191] msm-dsp-audio msm-dsp-audio.0: msm_pcm_probe: dev name msm-dsp-audio.0 [ 2.735931] asoc: msm-codec-dai <-> msm-cpu-dai.0 mapping ok [ 2.737304] ALSA device list: [ 2.737396] #0: msm-audio [ 2.737609] GACT probability NOT on [ 2.737731] Mirror/redirect action on [ 2.737884] u32 classifier [ 2.737976] Actions configured [ 2.738067] Netfilter messages via NETLINK v0.30. [ 2.738311] nf_conntrack version 0.5.0 (12554 buckets, 50216 max) [ 2.738922] ctnetlink v0.93: registering with nfnetlink. [ 2.739166] NF_TPROXY: Transparent proxy support initialized, version 4.1.0 [ 2.739257] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. [ 2.739868] xt_time: kernel timezone is -0000 [ 2.740020] [TSP] Calibration End!!!!!! [ 2.740112] [TSP] Clearing unused slots [ 2.740570] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.740936] arp_tables: (C) 2002 David S. Miller [ 2.741180] TCP cubic registered [ 2.741271] Initializing XFRM netlink socket [ 2.741912] NET: Registered protocol family 10 [ 2.744079] Mobile IPv6 [ 2.744201] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 2.744476] IPv6 over IPv4 tunneling driver [ 2.745635] NET: Registered protocol family 17 [ 2.745758] NET: Registered protocol family 15 [ 2.746673] Bluetooth: RFCOMM TTY layer initialized [ 2.746765] Bluetooth: RFCOMM socket layer initialized [ 2.746887] Bluetooth: RFCOMM ver 1.11 [ 2.747039] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.747131] Bluetooth: BNEP filters: protocol multicast [ 2.747314] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.747558] NET: Registered protocol family 35 [ 2.747833] Registering the dns_resolver key type [ 2.747985] VFP support v0.3: implementor 51 architecture 64 part 2d variant 0 rev 0 [ 2.752075] Registering SWP/SWPB emulation handler [ 2.763671] clock_late_init() disabled 186 unused clocks [ 2.807373] MSM Watchdog Initialized [ 2.808288] set_dload_mode <0> ( C0016B04 ) [ 2.809082] [TKEY] touchkey_init START [ 2.809234] is_lpcharging_state: is_lpm_boot:0 [ 2.810119] [TKEY] touchkey_init F/W version: 0x12, Module version:0x22, HW_REV: 0xd [ 2.810363] [TKEY] sec i2c_touchkey_probe [ 2.810638] input: sec_touchkey as /devices/virtual/input/input10 [ 2.811126] [TKEY] enter touchkey_auto_calibration [ 2.834350] mmc0: new high speed MMC card at address 0001 [ 2.834838] mmcblk0: mmc0:0001 KYL00M 14.6 GiB [ 2.835083] mmcblk0boot0: mmc0:0001 KYL00M partition 1 512 KiB [ 2.835296] mmcblk0boot1: mmc0:0001 KYL00M partition 2 512 KiB [ 2.840026] mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 > [ 2.845550] mmcblk0boot1: unknown partition table [ 2.847747] mmcblk0boot0: unknown partition table [ 2.854370] [TKEY] after touchkey_auto_calibration result = 1 [ 2.854553] [TKEY] touchkey_init END [ 2.855987] rtc-pm8xxx rtc-pm8xxx: setting system clock to 1970-01-13 16:19:25 UTC (1095565) [ 2.856201] sec-battery sec-battery: sec_bat_probe: SEC Battery Driver Loading [ 2.856750] sec_bat_get_lpcharging_state: LP charging:0 [ 2.858978] sec_bat_measure_work: adc work already on a queue [ 2.860015] ------------[ cut here ]------------ [ 2.860137] WARNING: at ../../../../../../kernel/samsung/msm8660/fs/proc/generic.c:586 proc_register+0x150/0x1ac() [ 2.860321] proc_dir_entry '/proc/last_kmsg' already registered [ 2.860504] Modules linked in: [ 2.860687] [<c010a798>] (unwind_backtrace+0x0/0xe0) from [<c018a02c>] (warn_slowpath_common+0x4c/0x64) [ 2.860870] [<c018a02c>] (warn_slowpath_common+0x4c/0x64) from [<c018a070>] (warn_slowpath_fmt+0x2c/0x3c) [ 2.861083] [<c018a070>] (warn_slowpath_fmt+0x2c/0x3c) from [<c0270d68>] (proc_register+0x150/0x1ac) [ 2.861267] [<c0270d68>] (proc_register+0x150/0x1ac) from [<c027114c>] (create_proc_entry+0x70/0x90) [ 2.861389] [<c027114c>] (create_proc_entry+0x70/0x90) from [<c0030ac4>] (ram_console_late_init+0x24/0x70) [ 2.861572] [<c0030ac4>] (ram_console_late_init+0x24/0x70) from [<c0100408>] (do_one_initcall+0x8c/0x150) [ 2.861785] [<c0100408>] (do_one_initcall+0x8c/0x150) from [<c00089b8>] (kernel_init+0x9c/0x144) [ 2.861968] [<c00089b8>] (kernel_init+0x9c/0x144) from [<c0105bfc>] (kernel_thread_exit+0x0/0x8) [ 2.862152] ---[ end trace 0889e7cd807c49aa ]--- [ 2.862396] Warning: unable to open an initial console. [ 2.862792] Freeing init memory: 272K [ 2.865142] init: init started! [ 2.866363] SELinux: unknown common [ 2.866729] init: SELinux: Could not load policy: Invalid argument [ 2.867004] init: failed to load policy: Invalid argument [ 2.867187] init: Security failure; rebooting into recovery mode... [ 2.867401] SysRq : Emergency Remount R/O [ 2.867614] Emergency Remount complete [ 2.868164] (sec_debug_set_upload_magic) 0 [ 2.868347] set_dload_mode <0> ( C01741C4 ) [ 2.883361] usb_reset: usb: notify offline [ 2.883514] usb: composite_disconnect [ 2.883605] usb: android_disconnect schedule_work [ 2.884033] usb: android_work config= (null),connected=0,sw_connected=0 [ 2.884124] android_work: did not send uevent (0 0 (null)) [ 2.896087] pmic8058_xoadc:The offset for AMUX calibrationwas -570 [ 2.928375] pn544_shutdown [ 2.934112] sdio_alInitiating msm_sdio_al_shutdown... [ 2.934265] sdio_al: msm_sdio_al_shutdown: msm_sdio_al_shutdown complete. [ 2.934539] charm_modem_shutdown: setting AP2MDM_STATUS low for a graceful restart [ 3.005157] param_sec_operation: filp_open failed. (-2) [ 3.005340] sec_open_param PARAM OPEN FAIL [ 3.010467] sec_switch_init_work error value = 3 [ 3.086090] mmc4: host doesn't support card's voltages [ 3.086273] mmc4: error -22 whilst initialising SDIO card [ 3.087890] mmc4: host doesn't support card's voltages [ 3.088073] mmc4: error -22 whilst initialising MMC card [ 4.003814] param_sec_operation: filp_open failed. (-2) [ 4.003997] sec_open_param PARAM OPEN FAIL [ 4.004089] sec_switch_init_work error value = 3 [ 4.363861] sec_jack:sec_jack_det_irq_handler : ready = 1. [ 4.363983] sec_jack: ear micbias off [ 4.930297] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 5 [ 4.930725] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 6 [ 4.930847] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 7 [ 4.953887] a2220_bootup_init: firmware loaded successfully [ 5.003936] param_sec_operation: filp_open failed. (-2) [ 5.004058] sec_open_param PARAM OPEN FAIL [ 5.004150] sec_switch_init_work error value = 3 [ 5.164245] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 8 [ 5.164367] audience_a2220 :a2220_bootup_init : get_hw_rev of Target = 13 [ 5.164520] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 9 [ 5.164855] audience_a2220 :execute_cmdmsg : ...go to suspend first [ 5.164978] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 10 [ 5.293945] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 11 [ 5.294036] a2220_bootup_init: initialized! [ 5.294189] audience_a2220 :a2220_bootup_init : a2220_bootup_init - finish [ 6.003967] param_sec_operation: filp_open failed. (-2) [ 6.004150] sec_open_param PARAM OPEN FAIL [ 6.004241] sec_switch_init_work error value = 3 [ 7.003967] param_sec_operation: filp_open failed. (-2) [ 7.004058] sec_open_param PARAM OPEN FAIL [ 7.004150] sec_switch_init_work error value = 3 [ 8.003967] param_sec_operation: filp_open failed. (-2) [ 8.004058] sec_open_param PARAM OPEN FAIL [ 8.004211] sec_switch_init_work error value = 3 [ 8.063934] msmsdcc_runtime_suspend: Enter WIFI suspend [ 8.693939] fsa9480 5-0025: fsa9480_init_detect [ 8.695007] fsa9480 5-0025: dev1: 0x4, dev2: 0x0 [ 8.695098] fsa9480 5-0025: usb connect [ 8.695281] fsa9480_usb_cb attached 1 [ 8.695373] [TSP] mxt224_ta_probe [ 8.705505] [TSP]TA_probe MXT224E T48 Byte2 is 114 [ 8.705657] sec-battery sec-battery: sec_bat_set_property: cable was changed(3) [ 8.707550] [TSP] Calibration!!!!!! [ 8.717468] [TSP] Calibration End!!!!!! [ 8.717620] [TSP] Clearing unused slots [ 9.003967] param_sec_operation: filp_open failed. (-2) [ 9.004150] sec_open_param PARAM OPEN FAIL [ 9.004241] sec_switch_init_work error value = 3 [ 9.203948] smb328a 15-0034: smb328a_set_charging_current : [ 9.204406] smb328a 15-0034: smb328a_set_command_reg : reg (0x31) = 0xb9 [ 9.205230] smb328a_set_command_reg : => reg (0x31) = 0xa9 [ 9.206054] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x0) = 0x17 [ 9.206573] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x1) = 0x10 [ 9.207031] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x2) = 0xca [ 9.207580] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x3) = 0xda [ 9.208099] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x4) = 0x4f [ 9.208862] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x4) = 0x4d [ 9.209381] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x5) = 0x0 [ 9.209930] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x6) = 0x4d [ 9.210388] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x7) = 0xf6 [ 9.210937] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x8) = 0x0 [ 9.211456] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x9) = 0x1 [ 9.211578] smb328a 15-0034: smb328a_get_input_current_limit : [ 9.212097] smb328a 15-0034: smb328a_get_input_current_limit : reg (0x1) = 0x10 [ 9.212219] smb328a 15-0034: smb328a_get_input_current_limit : get icl = 450, data = 0 [ 9.212768] smb328a 15-0034: smb328a_get_float_voltage : reg (0x2) = 0xca, float vol = 4200 [ 9.213653] smb328a 15-0034: smb328a_set_top_off : reg (0x0) = 0x17 [ 9.214416] smb328a 15-0034: smb328a_set_top_off : => reg (0x0) = 0x17 [ 9.214965] smb328a 15-0034: smb328a_set_top_off : reg (0x7) = 0xf6 [ 9.215759] smb328a 15-0034: smb328a_set_top_off : => reg (0x7) = 0xf6 [ 9.216583] smb328a 15-0034: smb328a_enable_charging : [ 9.217102] smb328a 15-0034: smb328a_enable_charging : reg (0x31) = 0xa9 [ 9.217834] smb328a_enable_charging : => reg (0x31) = 0xa9 [ 9.218017] smb328a 15-0034: smb328a_watchdog_control : (1) [ 9.218841] smb328a 15-0034: smb328a_watchdog_control : reg (0x4) = 0x4d [ 9.219635] smb328a 15-0034: smb328a_watchdog_control : => reg (0x4) = 0x4f [ 9.543945] charm_modem_shutdown: MDM2AP_STATUS never went low. [ 10.003967] param_sec_operation: filp_open failed. (-2) [ 10.004058] sec_open_param PARAM OPEN FAIL [ 10.004241] sec_switch_init_work error value = 3 [ 11.003967] param_sec_operation: filp_open failed. (-2) [ 11.004119] sec_open_param PARAM OPEN FAIL [ 11.004211] sec_switch_init_work error value = 3 [ 12.003967] param_sec_operation: filp_open failed. (-2) [ 12.004119] sec_open_param PARAM OPEN FAIL [ 12.004211] sec_switch_init_work failed 10 times... So switch_sel is set by [1] [ 12.004394] sec_switch_init_work value = 1 [ 12.004486] sec_switch_set_vbus_status USB_VBUS_AP_ON 2 [ 12.014678] fsa9480_manual_switching(0) [ 13.944091] ld9040 start ld9040_shutdown [ 13.944183] ld9040 lcdc_ld9040_panel_off + (1,1,1) [ 14.083953] ld9040 : lcdc_config_gpios [0] [ 14.084045] ld9040 start ld9040_disp_powerdown [ 14.084197] ld9040 lcdc_ld9040_panel_off - [ 14.085418] disable_charging_before_reset: check voltage(4200000) [ 14.085510] smb328a 15-0034: smb328a_disable_charging : [ 14.086029] smb328a 15-0034: smb328a_disable_charging : reg (0x31) = 0xa9 [ 14.086761] smb328a_disable_charging : => reg (0x31) = 0xb9 [ 14.588317] disable_charging_before_reset: check voltage(4201250) after disable charging. [ 14.588684] Disabling non-boot CPUs ... [ 14.588928] set_freq_limit: 0x8 0, min 384000, max 1242000 [ 14.591583] Restarting system with command 'recovery'. [ 14.591705] [ 14.591796] Restarting Linux version 3.0.101-slim-gebbc292 (nospamdan@Mint17Build) (gcc version 4.8 (GCC) ) #1 SMP PREEMPT Sun Nov 29 12:12:19 EST 2015 [ 14.591857] No errors detected
Optional Paste Settings
Category:
None
Cryptocurrency
Cybersecurity
Fixit
Food
Gaming
Haiku
Help
History
Housing
Jokes
Legal
Money
Movies
Music
Pets
Photo
Science
Software
Source Code
Spirit
Sports
Travel
TV
Writing
Tags:
Syntax Highlighting:
None
Bash
C
C#
C++
CSS
HTML
JSON
Java
JavaScript
Lua
Markdown (PRO members only)
Objective C
PHP
Perl
Python
Ruby
Swift
4CS
6502 ACME Cross Assembler
6502 Kick Assembler
6502 TASM/64TASS
ABAP
AIMMS
ALGOL 68
APT Sources
ARM
ASM (NASM)
ASP
ActionScript
ActionScript 3
Ada
Apache Log
AppleScript
Arduino
Asymptote
AutoIt
Autohotkey
Avisynth
Awk
BASCOM AVR
BNF
BOO
Bash
Basic4GL
Batch
BibTeX
Blitz Basic
Blitz3D
BlitzMax
BrainFuck
C
C (WinAPI)
C Intermediate Language
C for Macs
C#
C++
C++ (WinAPI)
C++ (with Qt extensions)
C: Loadrunner
CAD DCL
CAD Lisp
CFDG
CMake
COBOL
CSS
Ceylon
ChaiScript
Chapel
Clojure
Clone C
Clone C++
CoffeeScript
ColdFusion
Cuesheet
D
DCL
DCPU-16
DCS
DIV
DOT
Dart
Delphi
Delphi Prism (Oxygene)
Diff
E
ECMAScript
EPC
Easytrieve
Eiffel
Email
Erlang
Euphoria
F#
FO Language
Falcon
Filemaker
Formula One
Fortran
FreeBasic
FreeSWITCH
GAMBAS
GDB
GDScript
Game Maker
Genero
Genie
GetText
Go
Godot GLSL
Groovy
GwBasic
HQ9 Plus
HTML
HTML 5
Haskell
Haxe
HicEst
IDL
INI file
INTERCAL
IO
ISPF Panel Definition
Icon
Inno Script
J
JCL
JSON
Java
Java 5
JavaScript
Julia
KSP (Kontakt Script)
KiXtart
Kotlin
LDIF
LLVM
LOL Code
LScript
Latex
Liberty BASIC
Linden Scripting
Lisp
Loco Basic
Logtalk
Lotus Formulas
Lotus Script
Lua
M68000 Assembler
MIX Assembler
MK-61/52
MPASM
MXML
MagikSF
Make
MapBasic
Markdown (PRO members only)
MatLab
Mercury
MetaPost
Modula 2
Modula 3
Motorola 68000 HiSoft Dev
MySQL
Nagios
NetRexx
Nginx
Nim
NullSoft Installer
OCaml
OCaml Brief
Oberon 2
Objeck Programming Langua
Objective C
Octave
Open Object Rexx
OpenBSD PACKET FILTER
OpenGL Shading
Openoffice BASIC
Oracle 11
Oracle 8
Oz
PARI/GP
PCRE
PHP
PHP Brief
PL/I
PL/SQL
POV-Ray
ParaSail
Pascal
Pawn
Per
Perl
Perl 6
Phix
Pic 16
Pike
Pixel Bender
PostScript
PostgreSQL
PowerBuilder
PowerShell
ProFTPd
Progress
Prolog
Properties
ProvideX
Puppet
PureBasic
PyCon
Python
Python for S60
QBasic
QML
R
RBScript
REBOL
REG
RPM Spec
Racket
Rails
Rexx
Robots
Roff Manpage
Ruby
Ruby Gnuplot
Rust
SAS
SCL
SPARK
SPARQL
SQF
SQL
SSH Config
Scala
Scheme
Scilab
SdlBasic
Smalltalk
Smarty
StandardML
StoneScript
SuperCollider
Swift
SystemVerilog
T-SQL
TCL
TeXgraph
Tera Term
TypeScript
TypoScript
UPC
Unicon
UnrealScript
Urbi
VB.NET
VBScript
VHDL
VIM
Vala
Vedit
VeriLog
Visual Pro Log
VisualBasic
VisualFoxPro
WHOIS
WhiteSpace
Winbatch
XBasic
XML
XPP
Xojo
Xorg Config
YAML
YARA
Z80 Assembler
ZXBasic
autoconf
jQuery
mIRC
newLISP
q/kdb+
thinBasic
Paste Expiration:
Never
Burn after read
10 Minutes
1 Hour
1 Day
1 Week
2 Weeks
1 Month
6 Months
1 Year
Paste Exposure:
Public
Unlisted
Private
Folder:
(members only)
Password
NEW
Enabled
Disabled
Burn after read
NEW
Paste Name / Title:
Create New Paste
Hello
Guest
Sign Up
or
Login
Sign in with Facebook
Sign in with Twitter
Sign in with Google
You are currently not logged in, this means you can not edit or delete anything you paste.
Sign Up
or
Login
Public Pastes
w
16 hours ago | 0.09 KB
[email protected]
- idiot sending fr...
17 hours ago | 1.35 KB
Untitled
21 hours ago | 0.03 KB
Checking in availability
1 day ago | 0.66 KB
TRMP TOKEN
1 day ago | 1.56 KB
Untitled
1 day ago | 0.16 KB
my-push Script
1 day ago | 0.19 KB
Mapscan v2.0 - Archeagus Grey Hack Series, Ep...
JavaScript | 2 days ago | 9.34 KB
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the
Cookies Policy
.
OK, I Understand
Not a member of Pastebin yet?
Sign Up
, it unlocks many cool features!
