Create a new version of paste:

F/GO Cheat apk links
Pastebin last updated: 14/8/2016

This apk allows you to farm/reroll faster.

[DISCLAIMER]
Nobody has ever been banned for using a modified apk of any type, but keep in mind that
any alteration of the original apk (including just changing the package name) goes against
the terms of service of DW. Moreover, some dataminers have discovered that now the game
tells the server the package name of the apk and your nickname when you start a battle.
If they ever decide to start banning people you may be eligible for a permanent vacation,
but it's very unlikely for them to do so, since the negative reaction would be huge.
TL;DR: Use these at your own risk.

[Update on this]
There has been a case of an anon posting a screenshot of an ibaraki with 3 billion health,
done with cheat engine. This was to test whether giving more health to the boss and beating
it would make the global progress bar deplete faster. Turns out that it doesn't, and that
the maximum damage substracted to the bar is fixed to the real health.
This screenshot was twitted by some nip to DW, and after a bit the account used by the anon
who made the test was banned (DW did it by searching for people who had the specific servants
in the screenshot around the time when the screen was posted, and finding the only one who was
fighting a 3B health ibaraki).
This has been the first case of ban related to cheat usage though, and there haven't been any
others so far, but be cautious when posting screenshots when using cheatapk, and avoid showing
an evident usage of cheats.


CHEAT APK v1.13 (version 6)

From a based 2ch anon.
It has Damage Boost, Speed Boost, No Damage from Enemies and other stuff.
Pic with all the settings that can be chosen from the myroom screen (may be outdated)
(thanks to >>145349440): http://i.imgur.com/SZnlqPt.jpg

The energy saving mode can help you run the game better,
It disables certain effects during battle so it should crash less often,
and you can still disable all the cheats if you want to play legit.

Checked for safeness by shiki apk anon.
Do not use the Battle Skip function during Raid Boss. You wont get any damage if you do.

As always, use at your own risk.


--- Pre-patched apk packed by me using apkicon editor:

https://drive.google.com/open?id=0B3sqUVKKkyuEanNrejBoaFdKbFE

You can install it without lucky patcher as long as it's a clean install or an install on top
of another apk packed with apkicon editor, like previous versions of this pre-patched apk.

You can make the settings screen show english labels by copying this little file to the
/data/data/com.aniplex.fategrandorder/files folder using a file manager with root access.
https://drive.google.com/open?id=0B3sqUVKKkyuEVzdiNEwtc0M3Yjg


--- Standalone patcher:

This patch converts an unlocked apk into a cheatapk.

https://mega.nz/#!KIBFiRrD!aFoGzTxmMkYlZ4xxxz05ZMHpFG426w14FDMTMwaDEyM

To use it just run the .bat file, then the program will ask you to open the apk to patch.
The resulting apk will be saved to that same folder as the original apk.
This apk is not signed, so you'll have to either sign it with zipsigner or apk icon editor,
or use lucky patcher to force your phone to install unsigned apks. Check the faq for more info.


--- Recovering your bind code from unusable apks:
You can use Lucky Patcher (needs root) to remove signature verification and overwrite the cheat
apk with a legit apk. Then, get a bind code and switch to any apk you may need.


Memory hacking guide (needs emulator)

Download Cheatengine
Start Cheatengine, Start Andy (it doesn't matter which order, you can restart either anytime)
Press the small PC icon in the top left of CE and scroll down until you see several VBoxHeadless.exe processes.
The very last one of those in the list is the one we want. Double click it.

You see those long strings of 0's and F's under Memory Scan Options? Cut 7 0s, and cut 7 Fs, this is just to make
scanning faster as Andy does not actually ever go above FFFFFFFF in memory range.
Now, to make this as easy as possible, there is a very simple way to get NP, Attack and HP of a servant in one search.
Right below New Scan, there's a field for input and below that, options, by default it's set to exact value and 4 bytes.
We don't want that. Click on 4 bytes, select the last option, grouped.

4p:7684 4:* 4:* 4p:10206 4:10206 4:* 4:* 4:* 4p:0 4:* 4:10000

You copy this and enter it.
The first value, the 7684, you replace with the attack stat of the servant you want to use for this.
The second and third value, which are identical, are current HP and max HP, so if you use this at the start of the battle,
they're the same value. You CAN replace the attack value with * if you forgot the value.
The fourth value, the 0, is your current NP gauge. If you use Hollow, its 5000. Kaleido is 8000.

Example follows.

Now assume we use a Level 1 Saber with 2222 HP and 1734 Attack and no CE that gives NP
4p:1734 4:* 4:* 4p:2222 4:2222 4:* 4:* 4:* 4p:0 4:* 4:10000

This is to show you how to replace the specific numbers

If you use the same Saber with Kaleido
4p:1734 4:* 4:* 4p:2222 4:2222 4:* 4:* 4:* 4p:8000 4:* 4:10000

Now, what do you do once you entered those values?

You go into combat and press first scan.
It will only find a single result. (If you replace the attack value with *, you will get old results of previously edited
battles as well at times)
Double click the result
It will put 3 addresses in the table at the bottom
Attack
Current HP
NP Gauge
Generally you only need the first and last one. You can edit both at the same time by holding CTRL and click both, then
press enter, then enter 50000 into the new popup and hit enter again
that gives Saber 50000 Attack and 500% NP Gauge.
If you now press spacebar, it makes a small X in the checkboxes at the far left of the address, freezing the address,
preventing it from changing.
You ABSOLUTELY should unfreeze the value at the end of battle however, it can end up freezing the emulator.

And this is how you damage / hp / NP hack with ease
You do need to search the value again for every battle, but it's as simple as pressing "new scan" and "first scan" quickly.
If 50000 attack isn't enough, the sky is the limit


About

Available features and safeness of each:
- Extra damage
Hard for DW to detect, especially if the damage doesn't go over 10M.
Lower damage multipliers are even safer than high ones.
- No damage from enemies
Same as above.
- Win battle at the first wave (Last Wave hack)
(You still get all the drops you normally would)
Its usage is evident, since when the battle ends abruptly
the game sends an error message to the servers.
Makes for extremely fast hardcore apks, the least safe ones.
- Start with full NP bar
Practically impossible to detect.
- Reduced cooldown of skills
Same as above.
- Increased battle speed
Same as above.
Apks which only have this hack aren't really cheat apks.
They could be called speed apks.

Notes:
- Root not needed
- You'll have to switch to regular apk if you want to buy quartz (you can switch back afterwards)
- If you want extra safety use an apk with the original package name: com.aniplex.grandorder
  or repack using the guide towards the bottom to give it that name.
- Apks with package names different than the original can be installed alongside it, though,
  allowing you to have more than one account on the same device.

- Please notice that apks that have the same package name will try to install on top of
  each other as an update. This will work only if they have the same signature, though,
  so you can't install a cheat apk with the original package name on top of the original
  apk. You'll have to uninstall the original apk first and rebind.


===========================================================================================
-Cheat apk Shiki edition- (Outdated)
Made by a new Cheatapk anon
Package name: com.aniplex.grandorder1

https://mega.nz/#F!TII2EAqT!OAdRNrj31ssXngxw6hfEnw

Check the filenames to know which hacks have been applied.


===========================================================================================
-Cheat apk Shakespeare edition- (Outdated)
Made by Pastebin anon
Package name: com.aniplex.grandorder

https://drive.google.com/open?id=0B3sqUVKKkyuEbF9udjNxVjctSzA

I use letters in the filenames to indicate the hacks applied:
- Increased battle speed
S3 (1.5x/3x speed)
- Extra damage and no damage from enemies
D100 (100x damage multiplier)
- Last Wave
L
- Start with full NP bar
N
- Toggleable version
t (put after every feature that can be toggled)

How to toggle the hacks:
- Last Wave
Enabled when the "normal NP speed" button in the battle menu (the lowermost button) is turned on.
- Extra damage and no damage from enemies
Enabled when the "full AP notification" button in the MyRoom settings menu is turned on. 
- Start with full NP bar
Enabled when the "full AP notification" button in the MyRoom settings menu is turned on.


===========================================================================================
-Chinese cheat apk- (Outdated)
Made by andylee
Package name: com.aniplex.grandorder

Version: 1.8.0
https://mega.nz/#!EdJAiSZS!u8E63bh9a8rTPAI_g0aDa7RchvOzWYVPwC3ZdTEkvks
Note:
A couple anons reported losing their account due to using this apk.
Since no proof has been provided I decided to leave it in this paste,
but, as with any apks not made by yourselves, use it at your own risk.

- Damage multiplier depends on the sound effects volume slider in the MyRoom settings menu:
  0: Original
  1: 10x
  ...
  10: 100x
- Enemies deal no damage
- 5x speed 
- Auto Win battle after the first turn
  (toggleable with the "full AP notification" button in the MyRoom settings menu)


===========================================================================================
-Cheat apk Tamamo edition-
Made by the old Cheatapk anon

This apk is no longer updated.
Try one of the apks above or make the updated versions yourself.
Package name: com.aniplex.grandorder1


===========================================================================================
Guide on how to repack the apk

http://pastebin.com/6gSqPnyK

This allows you to:
- Edit the package name to have as many apks as you want
- Change the icon and/or splash screen
- Make your own cheatapk by following the guide below


===========================================================================================
Guide on how to make a cheat apk

(Note: the code needed for the Auto-battle function has been removed by DW)

[Prerequisites]
- Read the pastebin above to learn how to unpack and repack the apk.
- Get ILSpy: http://ilspy.net/
- Get the Reflexil plugin: https://github.com/sailro/Reflexil/releases
- Get a clean apk:
  http://apkpure.com/fate-grand-order/com.aniplex.fategrandorder

[Preparation]
- Unzip ILSpy and Reflexil and copy the plugin files to ILSpy's folder.
- Open ILSpy, select all the dll assemblies on the diagram box on
  the left, then remove them to avoid cluttering the search results.
- Unpack the apk, use Ctrl-D to open the apk folder and take notice
  of its location on your drive.
- Use ILspy to open the file Assembly-CSharp.dll from the folder
  \apk\assets\bin\Data\Managed
- Open the Reflexil plugin from the view menu and resize its box.
  You'll use it to edit the lines seen in the upper box indirectly.
- Use Ctrl-E to open the search box, and set it on the right
  to search for Members.

[How to hack]
- Search for the following functions depending on the desired hack.
- Edit them by right clicking on the lines in the reflexil box.
- You can sort lines by dragging them around with your mouse.
- After editing you can update the upper box to check the results
  by right clicking on the function in the diagram and choosing
  Update object model. This is not actually needed, though.

[Functions]
- Damage modifier
  Edit: getBaseATK
  Result: http://i.imgur.com/QhYNRmS.png
  Add the brfalse line only after adding and sorting all the others.
  The ldfld you add must have as operand a field reference to the
  bool isEnemy in -/BattleServantData (it has a blue icon).
  The ldc.i4 must have as operand a Int32 value.
  The brfalse must have as operand an Instruction reference to the
  second ldarg.0 line.
  - If you want the enemies to have normal damage:
    At line 03, instead of ldc.i4.0, put a ldarg.0, then insert
    in the line after 03 a copy of line 06. It's a ldfld operand
    with a field reference to the bool atk in -/BattleServantData
    (it has a blue icon). Use Update object model to check that
    the if clause is now "if (this.isEnemy){return this.atk;}".
- Speed toggle
  Edit: setTimeAcceleration
  Lines to edit: http://i.imgur.com/CBhvIel.png
  Change 1 and 2 with the multipliers you want instead of 1x/2x.
  You can use decimal numbers too.
- NP gauge
  Edit: usedTpWeapon and setInitQuest
  Set this.np = 30000; in both (300.00%), after changing the last
  ldc.i4.0 line to a ldc.i4 with a Int32 value as operand.
  The usedTPWeapon one makes the NP gauge stay full after using an np.
  The setInitQuest one makes you start with full np.
- Skills' cooldown
  Edit: useSkill (the one from BattleServantData) and useMasterSkill
  Result: http://i.imgur.com/hI3D0Xa.png
  Add the two highlighted lines to both functions.
  This turns any skills' cooldown to zero.
  The useSkill one affects servants' cooldowns.
  The useMasterSkill one affects the master's cooldowns.
- Last wave
  Edit: checkNextBattle and checkEndBattle (the one from BattleLogic)
  Delete all the lines except the last five (for checkNextBattle) and
  except lines 32-36 extremes included (for checkEndBattle).
  That way it doesn't check for the round clear condition.
  Result: http://i.imgur.com/kjtYyrf.png

[Finishing]
- When you're done, right click the Assembly-CSharp.dll in the diagram.
- Save it overwriting the previous one.
- Repack the apk and install it.

Special thanks to the other Cheatapk anons for their help with finding
the various functions to edit.