Pastebin
API
tools
faq
paste
Login
Sign up
Please fix the following errors:
New Paste
Syntax Highlighting
Texas Instruments X-Loader 1.5.0 (Jun 14 2011 - 22:04:07) Beagle xM Reading boot sector Loading u-boot.bin from mmc U-Boot 2011.03-rc1-00000-g9a3cc57-dirty (Apr 01 2011 - 17:41:42) OMAP3630/3730-GP ES2.1, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz OMAP3 Beagle board + LPDDR/NAND I2C: ready DRAM: 512 MiB NAND: 0 MiB MMC: OMAP SD/MMC: 0 *** Warning - readenv() failed, using default environment In: serial Out: serial Err: serial Beagle xM Rev C No EEPROM on expansion board Die ID #54ee00029ff80000016830c40500c007 Hit any key to stop autoboot: 0 The user button is currently NOT pressed. SD/MMC found on device 0 reading uEnv.txt 267 bytes read Loaded environment from uEnv.txt Importing environment from mmc ... Running uenvcmd ... reading uImage 3203088 bytes read reading uInitrd ** Unable to read "uInitrd" from mmc 0:1 ** ## Booting kernel from Legacy Image at 80000000 ... Image Name: Angstrom/2.6.32/beagleboard Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3203024 Bytes = 3.1 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Wrong Ramdisk Image Format Ramdisk image is corrupt or invalid Loading file "/boot/uImage" from mmc device 0:2 (xxa2) 3203088 bytes read Booting from mmc ... ## Booting kernel from Legacy Image at 80200000 ... Image Name: Angstrom/2.6.32/beagleboard Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3203024 Bytes = 3.1 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux............................................................. [ 0.000000] Linux version 2.6.32 (koen@dominion) (gcc version 4.3.3 (GCC) ) 1 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction ce [ 0.000000] Machine: OMAP3 Beagle Board [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] OMAP3630/DM3730 ES1.0 (l2cache iva sgx neon isp 192mhz_clk ) [ 0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000 [ 0.000000] Reserving 12582912 bytes SDRAM for VRAM [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pa8 [ 0.000000] Kernel command line: console=ttyS2,115200n8 mpurate=auto buddy=nt [ 0.000000] Beagle expansionboard: none [ 0.000000] Beagle cameraboard: lbcm3m1 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 256MB 256MB = 512MB total [ 0.000000] Memory: 500352KB available (5900K code, 673K data, 204K init, 0K) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:402 [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz [ 0.000000] Reprogramming SDRC clock to 332000000 Hz [ 0.000000] GPMC revision 5.0 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrups [ 0.000000] Total of 96 interrupts on 1 active controller [ 0.000000] OMAP GPIO hardware version 2.5 [ 0.000000] OMAP clockevent source: GPTIMER12 at 32768 Hz [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] Calibrating delay loop... 488.41 BogoMIPS (lpj=1908736) [ 0.000000] Mount-cache hash table entries: 512 [ 0.000000] CPU: Testing write buffer coherency: ok [ 0.000000] tmpfs: No value for mount option 'mode' [ 0.000000] devtmpfs: initialized [ 0.000000] regulator: core version 0.5 [ 0.000000] NET: Registered protocol family 16 [ 0.000000] OMAP3 Beagle Rev: xM C [ 0.000000] Beagle cameraboard: registering i2c2 bus for lbcm3m1 [ 0.000000] Found NAND on CS0 [ 0.000000] Registering NAND on CS0 [ 0.000000] Unable to get DVI reset GPIO [ 0.000000] omap_init_mbox: platform not supported [ 10.332672] OMAP DMA hardware revision 5.0 [ 10.338958] bio: create slab <bio-0> at 0 [ 10.340209] SCSI subsystem initialized [ 10.341552] usbcore: registered new interface driver usbfs [ 10.341705] usbcore: registered new interface driver hub [ 10.341857] usbcore: registered new device driver usb [ 10.342224] i2c_omap i2c_omap.1: bus 1 rev4.0 at 2600 kHz [ 10.344848] twl4030: PIH (irq 7) chaining IRQs 368..375 [ 10.344879] twl4030: power (irq 373) chaining IRQs 376..383 [ 10.345153] twl4030: gpio (irq 368) chaining IRQs 384..401 [ 10.346832] regulator: VUSB1V5: 1500 mV normal standby [ 10.347045] regulator: VUSB1V8: 1800 mV normal standby [ 10.347290] regulator: VUSB3V1: 3100 mV normal standby [ 10.348541] twl4030_usb twl4030_usb: Initialized TWL4030 USB module [ 10.348907] regulator: VMMC1: 1850 <--> 3150 mV normal standby [ 10.349182] regulator: VDAC: 1800 mV normal standby [ 10.349395] regulator: VPLL2: 1800 mV normal standby [ 10.349639] regulator: VSIM: 1800 <--> 3000 mV normal standby [ 10.349945] regulator: VAUX3: 1800 mV normal standby [ 10.350280] regulator: VAUX4: 1800 mV normal standby [ 10.360229] i2c_omap i2c_omap.2: bus 2 rev4.0 at 400 kHz [ 10.372924] i2c_omap i2c_omap.3: bus 3 rev4.0 at 100 kHz [ 10.374084] Switching to clocksource 32k_counter [ 10.383178] musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=0 [ 10.386810] musb_hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92 [ 10.386810] musb_hdrc musb_hdrc: MUSB HDRC host driver [ 10.386932] musb_hdrc musb_hdrc: new USB bus registered, assigned bus number1 [ 10.387084] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 10.387084] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber1 [ 10.387115] usb usb1: Product: MUSB HDRC host driver [ 10.387115] usb usb1: Manufacturer: Linux 2.6.32 musb-hcd [ 10.387145] usb usb1: SerialNumber: musb_hdrc [ 10.387756] hub 1-0:1.0: USB hub found [ 10.387786] hub 1-0:1.0: 1 port detected [ 10.388824] NET: Registered protocol family 2 [ 10.389007] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 10.389556] TCP established hash table entries: 16384 (order: 5, 131072 byte) [ 10.390014] TCP bind hash table entries: 16384 (order: 4, 65536 bytes) [ 10.390228] TCP: Hash tables configured (established 16384 bind 16384) [ 10.390258] TCP reno registered [ 10.390258] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 10.390289] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 10.390533] NET: Registered protocol family 1 [ 10.390960] RPC: Registered udp transport module. [ 10.390991] RPC: Registered tcp transport module. [ 10.390991] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 10.391845] omap-iommu omap-iommu.0: isp registered [ 10.393524] VFS: Disk quotas dquot_6.5.2 [ 10.393615] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 10.394683] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 10.395477] JFFS2 version 2.2. (NAND) (SUMMARY) �© 2001-2006 Red Hat, Inc. [ 10.396301] msgmni has been set to 977 [ 10.400054] alg: No test for stdrng (krng) [ 10.400329] Block layer SCSI generic (bsg) driver version 0.4 loaded (major ) [ 10.400360] io scheduler noop registered [ 10.400360] io scheduler deadline registered [ 10.400512] io scheduler cfq registered (default) [ 10.460235] OMAP DSS rev 2.0 [ 10.460296] OMAP DISPC rev 3.0 [ 10.460357] OMAP VENC rev 2 [ 10.460571] OMAP DSI rev 1.0 [ 10.797210] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 10.814697] serial8250.0: ttyS0 at MMIO 0x4806a000 (irq = 72) is a ST16654 [ 10.831542] serial8250.1: ttyS1 at MMIO 0x4806c000 (irq = 73) is a ST16654 [ 10.848388] serial8250.2: ttyS2 at MMIO 0x49020000 (irq = 74) is a ST16654 [ 11.414642] console [ttyS2] enabled [ 11.424865] brd: module loaded [ 11.431213] loop: module loaded [ 11.435577] omap2-nand driver initializing [ 11.440002] No NAND device found!!! [ 11.443664] No NAND device found!!! [ 11.448181] usbcore: registered new interface driver catc [ 11.453674] catc: v2.8:CATC EL1210A NetMate USB Ethernet driver [ 11.459716] usbcore: registered new interface driver kaweth [ 11.465362] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet dr [ 11.472961] usbcore: registered new interface driver pegasus [ 11.478698] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver [ 11.485717] usbcore: registered new interface driver rtl8150 [ 11.491485] usbcore: registered new interface driver asix [ 11.496978] usbcore: registered new interface driver cdc_ether [ 11.502960] usbcore: registered new interface driver dm9601 [ 11.508666] usbcore: registered new interface driver smsc95xx [ 11.514526] usbcore: registered new interface driver gl620a [ 11.520233] usbcore: registered new interface driver net1080 [ 11.526031] usbcore: registered new interface driver plusb [ 11.531646] usbcore: registered new interface driver rndis_host [ 11.537689] usbcore: registered new interface driver cdc_subset [ 11.543731] usbcore: registered new interface driver zaurus [ 11.549438] usbcore: registered new interface driver MOSCHIP usb-ethernet drr [ 11.557495] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 11.564300] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller [ 11.570312] ehci-omap ehci-omap.0: new USB bus registered, assigned bus numb2 [ 11.577911] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800 [ 11.592956] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00 [ 11.598846] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 11.605712] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber1 [ 11.613006] usb usb2: Product: OMAP-EHCI Host Controller [ 11.618347] usb usb2: Manufacturer: Linux 2.6.32 ehci_hcd [ 11.623809] usb usb2: SerialNumber: ehci-omap.0 [ 11.629028] hub 2-0:1.0: USB hub found [ 11.632873] hub 2-0:1.0: 3 ports detected [ 11.663513] Initializing USB Mass Storage driver... [ 11.668579] usbcore: registered new interface driver usb-storage [ 11.674652] USB Mass Storage support registered. [ 11.679656] mice: PS/2 mouse device common for all mice [ 11.685302] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 11.693115] input: twl4030_pwrbutton as /devices/platform/i2c_omap.1/i2c-1/11 [ 11.703826] i2c /dev entries driver [ 11.707916] Linux video capture interface: v2.00 [ 11.712860] omap-iommu omap-iommu.0: isp: version 1.1 [ 11.719543] vpfe_init [ 11.722381] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec [ 11.729156] cpuidle: using governor ladder [ 11.733276] cpuidle: using governor menu [ 11.843322] mmci-omap-hs mmci-omap-hs.1: err -16 configuring card detect [ 11.850341] Registered led device: beagleboard::usr0 [ 11.855499] Registered led device: beagleboard::usr1 [ 11.861999] Registered led device: beagleboard::pmu_stat [ 11.869049] usbcore: registered new interface driver usbhid [ 11.874725] usbhid: USB HID core driver [ 11.878753] Advanced Linux Sound Architecture Driver Version 1.0.21. [ 11.885650] usbcore: registered new interface driver snd-usb-audio [ 11.964874] No device for DAI omap-mcbsp-dai-0 [ 11.969390] No device for DAI omap-mcbsp-dai-1 [ 11.973876] No device for DAI omap-mcbsp-dai-2 [ 11.978363] No device for DAI omap-mcbsp-dai-3 [ 11.982849] No device for DAI omap-mcbsp-dai-4 [ 11.987335] OMAP3 Beagle SoC init [ 11.991516] asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok [ 12.002990] ALSA device list: [ 12.005981] #0: omap3beagle (twl4030) [ 12.009979] oprofile: using arm/armv7 [ 12.013885] TCP cubic registered [ 12.017181] NET: Registered protocol family 17 [ 12.021697] NET: Registered protocol family 15 [ 12.026275] lib80211: common routines for IEEE802.11 drivers [ 12.032012] ThumbEE CPU extension supported. [ 12.036315] Power Management for TI OMAP3. [ 12.041595] SmartReflex driver initialized [ 12.045867] omap3beaglelmb: Driver registration complete [ 12.059631] VFP support v0.3: implementor 41 architecture 3 part 30 variant 3 [ 12.067871] registered taskstats version 1 [ 12.072723] fbcvt: 640x480@60: CVT Name - .307M3-R [ 12.086517] Console: switching to colour frame buffer device 80x30 [ 12.098266] regulator_init_complete: incomplete constraints, leaving VAUX4 on [ 12.106475] regulator_init_complete: incomplete constraints, leaving VAUX3 on [ 12.115631] regulator_init_complete: incomplete constraints, leaving VDAC on [ 12.123504] omap_vout omap_vout: probed for an unknown device [ 12.129699] Waiting for root device /dev/mmcblk0p2... [ 12.272796] mmc0: host does not support reading read-only switch. assuming w. [ 12.280975] mmc0: new high speed SDHC card at address e624 [ 12.286773] mmcblk0: mmc0:e624 SU04G 3.69 GiB [ 12.291534] mmcblk0: p1 p2 [ 13.944000] kjournald starting. Commit interval 5 seconds [ 13.951080] EXT3-fs (mmcblk0p2): using internal journal [ 13.956359] EXT3-fs (mmcblk0p2): recovery complete [ 13.963714] EXT3-fs (mmcblk0p2): mounted filesystem with writeback data mode [ 13.970886] VFS: Mounted root (ext3 filesystem) on device 179:2. [ 13.981231] devtmpfs: mounted [ 13.984313] Freeing init memory: 204K INIT: version 2.86 booting Please wait: booting... Starting udev [ 14.706634] udev: starting version 151 Remounting root file system... Caching udev devnodes Populating dev cache [ 18.050170] Bluetooth: Core ver 2.15 [ 18.054748] NET: Registered protocol family 31 [ 18.059204] Bluetooth: HCI device and connection manager initialized [ 18.065643] Bluetooth: HCI socket layer initialized [ 18.085937] Bluetooth: L2CAP ver 2.14 [ 18.089630] Bluetooth: L2CAP socket layer initialized [ 18.109191] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 18.219970] NET: Registered protocol family 10 [ 18.278747] NET: Registered protocol family 23 [ 18.298339] IrCOMM protocol (Dag Brattli) [ 18.394653] Bluetooth: RFCOMM TTY layer initialized [ 18.399688] Bluetooth: RFCOMM socket layer initialized [ 18.404876] Bluetooth: RFCOMM ver 1.11 ALSA: Restoring mixer settings... Cleaning: /etc/network/run/ifstate. Configuring network interfaces... eth0: unknown interface: No such device eth0: unknown interface: No such device eth0 No such device Internet Systems Consortium DHCP Client 4.1.1-P1 Copyright 2004-2010 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ can't create /var/lib/dhcp/dhclient.eth0.leases: No such file or directory SIOCSIFADDR: No such device eth0: unknown interface: No such device eth0: unknown interface: No such device Bind socket to interface: No such device If you did not get this software from ftp.isc.org, please get the latest from ftp.isc.org and install that before requesting help. If you did get this software from ftp.isc.org and have not yet read the README, please read it before requesting help. If you intend to request help from the dhcp-server@isc.org mailing list, please read the section on the README about submitting bug reports and requests for help. Please do not under any circumstances send requests for help directly to the authors of this software - please send them to the appropriate mailing list as described in the README file. exiting. Failed to bring up eth0. usb0: unknown interface: No such device usb0: unknown interface: No such device usb0 No such device Internet Systems Consortium DHCP Client 4.1.1-P1 Copyright 2004-2010 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ can't create /var/lib/dhcp/dhclient.usb0.leases: No such file or directory SIOCSIFADDR: No such device usb0: unknown interface: No such device usb0: unknown interface: No such device Bind socket to interface: No such device If you did not get this software from ftp.isc.org, please get the latest from ftp.isc.org and install that before requesting help. If you did get this software from ftp.isc.org and have not yet read the README, please read it before requesting help. If you intend to request help from the dhcp-server@isc.org mailing list, please read the section on the README about submitting bug reports and requests for help. Please do not under any circumstances send requests for help directly to the authors of this software - please send them to the appropriate mailing list as described in the README file. exiting. Failed to bring up usb0. done. Starting portmap daemon: portmap. net.ipv4.conf.default.rp_filter = 1 net.ipv4.conf.all.rp_filter = 1 hwclock: can't open '/dev/misc/rtc': No such file or directory Wed Dec 14 16:11:00 GMT 2011 hwclock: can't open '/dev/misc/rtc': No such file or directory INIT: Entering runlevel: 5 Starting system message bus: dbus. Starting Hardware abstraction layer hald Configuring leds: beagleboard::pmu_stat: none beagleboard::usr0: heartbeat beagleboard::usr1: mmc0 Starting Dropbear SSH server: dropbear. Starting advanced power management daemon: No APM support in kernel (failed.) Starting Distributed Compiler Daemon: distcc. Starting Samba: smbd nmbd. Starting syslog-ng:. [ ok ]rting Avahi mDNS/DNS-SD Daemon: avahi-daemon Starting Network connection manager daemon: NetworkManager. cups: started scheduler. Starting GPE display manager: gpe-dm .-------. | | .-. | | |-----.-----.-----.| | .----..-----.-----. | | | __ | ---'| '--.| .-'| | | | | | | | |--- || --'| | | ' | | | | '---'---'--'--'--. |-----''----''--' '-----'-'-'-' -' | '---' The Angstrom Distribution beagleboard ttyS2 Angstrom 2010.7-test-20110220 beagleboard ttyS2 beagleboard login: root
Optional Paste Settings
Category:
None
Cryptocurrency
Cybersecurity
Fixit
Food
Gaming
Haiku
Help
History
Housing
Jokes
Legal
Money
Movies
Music
Pets
Photo
Science
Software
Source Code
Spirit
Sports
Travel
TV
Writing
Tags:
Syntax Highlighting:
None
Bash
C
C#
C++
CSS
HTML
JSON
Java
JavaScript
Lua
Markdown (PRO members only)
Objective C
PHP
Perl
Python
Ruby
Swift
4CS
6502 ACME Cross Assembler
6502 Kick Assembler
6502 TASM/64TASS
ABAP
AIMMS
ALGOL 68
APT Sources
ARM
ASM (NASM)
ASP
ActionScript
ActionScript 3
Ada
Apache Log
AppleScript
Arduino
Asymptote
AutoIt
Autohotkey
Avisynth
Awk
BASCOM AVR
BNF
BOO
Bash
Basic4GL
Batch
BibTeX
Blitz Basic
Blitz3D
BlitzMax
BrainFuck
C
C (WinAPI)
C Intermediate Language
C for Macs
C#
C++
C++ (WinAPI)
C++ (with Qt extensions)
C: Loadrunner
CAD DCL
CAD Lisp
CFDG
CMake
COBOL
CSS
Ceylon
ChaiScript
Chapel
Clojure
Clone C
Clone C++
CoffeeScript
ColdFusion
Cuesheet
D
DCL
DCPU-16
DCS
DIV
DOT
Dart
Delphi
Delphi Prism (Oxygene)
Diff
E
ECMAScript
EPC
Easytrieve
Eiffel
Email
Erlang
Euphoria
F#
FO Language
Falcon
Filemaker
Formula One
Fortran
FreeBasic
FreeSWITCH
GAMBAS
GDB
GDScript
Game Maker
Genero
Genie
GetText
Go
Godot GLSL
Groovy
GwBasic
HQ9 Plus
HTML
HTML 5
Haskell
Haxe
HicEst
IDL
INI file
INTERCAL
IO
ISPF Panel Definition
Icon
Inno Script
J
JCL
JSON
Java
Java 5
JavaScript
Julia
KSP (Kontakt Script)
KiXtart
Kotlin
LDIF
LLVM
LOL Code
LScript
Latex
Liberty BASIC
Linden Scripting
Lisp
Loco Basic
Logtalk
Lotus Formulas
Lotus Script
Lua
M68000 Assembler
MIX Assembler
MK-61/52
MPASM
MXML
MagikSF
Make
MapBasic
Markdown (PRO members only)
MatLab
Mercury
MetaPost
Modula 2
Modula 3
Motorola 68000 HiSoft Dev
MySQL
Nagios
NetRexx
Nginx
Nim
NullSoft Installer
OCaml
OCaml Brief
Oberon 2
Objeck Programming Langua
Objective C
Octave
Open Object Rexx
OpenBSD PACKET FILTER
OpenGL Shading
Openoffice BASIC
Oracle 11
Oracle 8
Oz
PARI/GP
PCRE
PHP
PHP Brief
PL/I
PL/SQL
POV-Ray
ParaSail
Pascal
Pawn
Per
Perl
Perl 6
Phix
Pic 16
Pike
Pixel Bender
PostScript
PostgreSQL
PowerBuilder
PowerShell
ProFTPd
Progress
Prolog
Properties
ProvideX
Puppet
PureBasic
PyCon
Python
Python for S60
QBasic
QML
R
RBScript
REBOL
REG
RPM Spec
Racket
Rails
Rexx
Robots
Roff Manpage
Ruby
Ruby Gnuplot
Rust
SAS
SCL
SPARK
SPARQL
SQF
SQL
SSH Config
Scala
Scheme
Scilab
SdlBasic
Smalltalk
Smarty
StandardML
StoneScript
SuperCollider
Swift
SystemVerilog
T-SQL
TCL
TeXgraph
Tera Term
TypeScript
TypoScript
UPC
Unicon
UnrealScript
Urbi
VB.NET
VBScript
VHDL
VIM
Vala
Vedit
VeriLog
Visual Pro Log
VisualBasic
VisualFoxPro
WHOIS
WhiteSpace
Winbatch
XBasic
XML
XPP
Xojo
Xorg Config
YAML
YARA
Z80 Assembler
ZXBasic
autoconf
jQuery
mIRC
newLISP
q/kdb+
thinBasic
Paste Expiration:
Never
Burn after read
10 Minutes
1 Hour
1 Day
1 Week
2 Weeks
1 Month
6 Months
1 Year
Paste Exposure:
Public
Unlisted
Private
Folder:
(members only)
Password
NEW
Enabled
Disabled
Burn after read
NEW
Paste Name / Title:
Create New Paste
Hello
Guest
Sign Up
or
Login
Sign in with Facebook
Sign in with Twitter
Sign in with Google
You are currently not logged in, this means you can not edit or delete anything you paste.
Sign Up
or
Login
Public Pastes
This month smells like money
CSS | 21 min ago | 1.05 KB
✅ API Flaw Money Method
CSS | 22 min ago | 1.05 KB
⭐ Exploit Documentation ⭐
CSS | 23 min ago | 1.05 KB
Untitled
21 hours ago | 0.71 KB
Custom em_booking_validate for dependent_even...
2 days ago | 1.15 KB
Untitled
2 days ago | 22.13 KB
[TLF 18.III] "PROJECT BLACKWIGHT" F...
2 days ago | 10.98 KB
[TLF 18.II] CLEARANCE
2 days ago | 2.21 KB
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the
Cookies Policy
.
OK, I Understand
Not a member of Pastebin yet?
Sign Up
, it unlocks many cool features!
