Pastebin
API
tools
faq
paste
Login
Sign up
Please fix the following errors:
New Paste
Syntax Highlighting
m/etc/firmware/misc_mdm/image/amss.mbn < void clist_t::add_tcb(threadid_t, tcb_t*) handle_interrupt void sys_ipc(threadid_t, threadid_t) void sys_schedule(threadid_t, word_t, word_t, word_t, word_t, word_t) finish_sys_schedule handle_pagefault void generic_space_t::handle_pagefault(void*, void*, generic_space_t::access_e, void*, bool, void (*)()) void setup_initial_mappings(space_t*) void tcb_t::unwind(tcb_t::unwind_reason_e, tcb_t*) tcb_t* create_root_server(threadid_t, threadid_t, threadid_t, threadid_t, fpage_t, fpage_t, word_t) void init_root_servers() finish_send_syscall_ipc send_syscall_ipc finish_undefined_exception finish_unhandled_memory_abort finish_send_exception_ipc void thread_resources_t::purge(tcb_t*) void arm_memory_abort(word_t, void*, arm_irq_context_t*, word_t) arm_memory_abort bool space_t::window_share_fpage(space_t*, fpage_t) void space_t::flush_sharing_on_delete() void space_t::flush_sharing_spaces() pistachio/src/clist.cc PANIC in %s, %s, line %d: tried to add invalid thread to cap list tried to add nilthread to cap list Thread %x(%s) is halted by %x(%s). Assertion tcb->get_state().is_running() failed in file %s, line %d (fn=%p) pistachio/src/exregs.cc Assertion tcb->get_state().is_halted() failed in file %s, line %d (fn=%p) sys_exchange_registers (dest=%t, control=%x) fast_schedule: current=%t type, flags = %d, %d %s:%d: spurious IRQ%d? triggered:ready and waiting %t current=%t %d %s:%d: IRQ handler TID is invalid -- halting IRQ%d triggered enqueue: not ready nor waiting %t current=%t %d pending:ready and waiting %t current=%t %d pending enqueue: not ready nor waiting %t current=%t %d sys_ipc %t => %t (recvfrom=%t) kmem_alloc (%d bytes), ip=%x kmem_pgtab_fast No permission - domain not shared!! kmem_mutexids pistachio/src/mutex.cc Assertion new_table failed in file %s, line %d (fn=%p) donate: current=%t dest_tcb=%t, %d %s:%d: invalid state (%x) Assertion !"We shouldn't get here!" failed in file %s, line %d (fn=%p) arch/arm/pistachio/v5/include/arch/ver/tcb.h sec-control - shr-domain on invalid op sec-control - shr-domain on invalid spc kmem_spaceids kmem_spaceswitch_control kmem_ipc_control pistachio/src/space.cc Assertion space_info_num_get(get_kip()->space_info) - 1 failed in file %s, line %d (fn=%p) %s:%d: unhandled pagefault @ %p, %p unhandled pagefault user page fault at %x (current=%t, ip=%x, access=%x) Unhandled pagefault in idle thread. kernel access raised user pagefault @ %p, ip=%p, space=%p, esp = %p current tcb = %p kernel page fault at %x (current=%t, ip=%x, space=%p) Assertion j != memory_info_num_desc_get(kip->memory_info) failed in file %s, line %d (fn=%p) Error setting up initial mappings current %t to_tcb %t dest %t pistachio/src/thread.cc RETRYING_MUTEX Unresolved unwind: tcb=%t p=%t s=%s (saved: p=%t s=%s) WAIT_XPU_EXREGS WAIT_XPU_DELTCB WAIT_FOREVER roottask %s pagefault at %p, ip=%p, sp=%p - deny roottask pagefault Failed to create root server TCB Failed to create root server address space Failed to map the kernel area failed to activate root server root task not found! pistachio/src/tracebuffer.cc Assertion trace_buffer failed in file %s, line %d (fn=%p) Assertion r failed in file %s, line %d (fn=%p) [1m--- KD# %s --- %s:%d: %t: Unhandled User SYSCALL at %p Unhandled SYSCALL [1m--- KD# %s at %p --- [r0-r7]={%p %p %p %p %p %p %p %p} [r8-r14]={%p %p %p %p %p %p(sp) %p(lr)} [cpsr, klr]={%p %p} Unsupported <swi 0x%x> @ pc=%p, Thread %x(%s) %s:%d: Unable to deliver user exception: no exception handler. %s:%d: %t: Unhandled Undefined Instruction at %p Unhandled Undefined Instruction Unhandled Reset Exception [1m--- KD# %s --- %s:%d: %t: Unhandled Memory Abort at %p Unhandled Memory Abort Undef-Inst 0x%x @ pc=%p, Thread %x(%s) Kernel undefined exception at %p %s:%d: Unable to deliver user exception: IPC error. Illegal misc syscall [illegal string] [string not mapped] arch/arm/pistachio/src/init.cc Assertion r != 0 failed in file %s, line %d (fn=%p) Processor Id => %lx: Extended Info IXP45X/IXP46X IXP42X 266MHz IXP42X 400MHz IXP42X 533MHz debug register = %lx icache lockdown register = %lx arch/arm/pistachio/src/resources.cc Not implemented: %s unimplemented arch/arm/pistachio/src/space.cc Assertion r == true failed in file %s, line %d (fn=%p) Invalid Parameter In Memop arch/arm/pistachio/v5/src/exception.cc kernel raised data abort exception: @ %p, ip = %p, fs = %ld Cannot Recover From Data Abort Mis-aligned @ %p, pc=%p, Thread %x(%s) (fs=%d) %s:%d: utcb fault, addr = %p, tcb = %p, space = %p %s:%d: entry = %lx (%lx), currdomain = %lx %s:%d: * pc = %p, fs = %x, fdomain = %lx make t_subtree failed conflicting subtree - cannot add window %p @ %p conflicting mapping - cannot add window %p @ %p arch/arm/pistachio/v5/src/linear_ptab_walker.cc bad addresspace state arch/arm/pistachio/v5/src/space.cc WARNING: %s, line %d (fn=%p) ===> 1MB page in UTCB area UTCB mapping not found found null space in source list del: %S, remove client space %S found null space in client list async_fp %t => %t Default: Invalid MSM Syscall: context->r1=%t, %t, %t TimeTest Direct Output in MSM Syscall: context->r2=%t, current_time=%t, context->r0=%t EXEC_IRAM: Executed IRAM Code in MSM Syscall: index=%t, iram_addr=%t, %t About to INTFREE in MSM Syscall: context->r2=%t, PSR_Irq_Mask=%t, %t EXITING MSM Syscall: context->r1=%t, context->r2=%t, context->r0=%t ENTERING MSM Syscall context->r1:%t, context->r2=%t, context->r3=%t EXEC_IRAM: Locked I/O in TLB in MSM Syscall: index=%t, tlb_address=%t, %t EXEC FROM CACHE in MSM Syscall: index=%t, region_start_address=%t, region_size=%t Control Exception in MSM Syscall: context->r2=%t, cmd=%t, %t FLUSH FROM CACHE in MSM Syscall: index=%t, start_address=%t, size=%t TRAMP Enabling in MSM Syscall: context->r2=%t, enable=%t, vec_index=%t EXEC_IRAM: Locked IRAM in TLB in MSM Syscall: index=%t, iram_addr=%t, %t Exec from IRAM in MSM Syscall: index=%t, context->r2=%t,size=%t, %t Executing TCXO Shutdown in MSM Syscall: index=%t, region_start_addr=%t, size=%t TCXO SHUTDOWN: Flushed TLB Entries in MSM Syscall: index=%t, lockdown_addr_1=%t, lockdown_adrr_2=%t FLUSH FROM CACHE: Flushed TLB Entries in MSM Syscall: index=%t, lockdown_addr_1=%t, lockdown_adrr_2=%t About to INTLOCK in MSM Syscall: context->r2:%t, PSR_Irq_Mask=%t, %t TCXO SHUTDOWN: Locked TLB Entries in MSM Syscall: index=%t, lockdown_addr_1=%t, lockdown_addr_2=%t TCXO SHUTDOWN: Executed TCXO Shutdown code in MSM Syscall: index=%t, shutdown_addr=%t, %t TCXO SHUTDOWN: Locked ICache in MSM Syscall: index=%t, region_start_addr=%t, size=%t FLUSH FROM CACHE: Unlocked DCache in MSM Syscall: index=%t, %t, %t FLUSH FROM CACHE: Unlocked ICache in MSM Syscall: index=%t, %t, %t TCXO SHUTDOWN: Enabled ICache in MSM Syscall: index=%t, %t, %t TCXO SHUTDOWN: Unlocked Entire ICache in MSM Syscall: index=%t, %t, %t EXEC FROM CACHE: Locked User Stack in MSM Syscall: index=%t, %t, %t EXEC FROM CACHE: Locked DCache in MSM Syscall: index=%t, %t, %t EXEC FROM CACHE: Flushed Cache in MSM Syscall: index=%t, %t, %t EXEC FROM CACHE: Locked TLB Entries in MSM Syscall: index=%t, lockdown_addr_1=%t, lockdown_addr_2=%t Intlock_prof: queue function called when interface uninitialized! Intlock_prof: Error Message Buffer Overflow - please increase the size of the error message queue in intlock_prof.c! Intlock_prof: dequeue function called when interface uninitialized! Intlock_prof: Error in profiling timer - negative time encountered. Intlock_prof: Error marking intfree %s [current]: No thread named: %s , rights: %s%s%s Root server: %16s ip: 0x%08x, sp: 0x%08x, 0x%08x:0x%08x Kernel descriptor: %16s %d.%d Kernel gen date %16s %s %d, %d Kernel version %16s %d.%d.%d Kernel supplier Version string System call offsets: SpaceControl %16s 0x%08x %17s 0x%08x ThreadControl ProcessorControl CacheControl ExchangeRegisters ThreadSwitch PlatformControl SecurityControl %16s 0x%08x MutexControl Thumb system call offsets: Processors %d: Proc%3d: external freq = %dMHz, internal freq = %dMHz Memory regions (%d): 0x%p - 0x%p %s 0x%p - 0x%p %s (%d) initial mapping bootloader specific architecture specific SpaceNames MutexNames ThreadNames Interactive Command Line Interface User Console conventional Kernel Interface Page: %16s %c%c%c%c %16s 0x%02x.0x%02x %16s %s-endian, %d-bit Kernel Debugger Features: VirtualReg info %16s num mrs: %d UTCB area info %16s min size: %dKB, alignment: %d, UTCB size: %d KIP area info %16s min size: %dKB %16s Phys 0x%p:0x%p Virt: 0x%p %16s schedule precision: %d us %16s user base: 0x%03x, system base: 0x%03x, thread bits: %d %16s sizes: : [ ] No mutexes currently present in system. Mutexes in the system: (mutex name/holder/waiters) present-list is wrong??? %t (%t <-> %t) *** ERROR *** === %s%sSPACE: %p == ID: %d == THREADS: %ld === KIP Area: %lx/%ld UTCB Area: %lx/%ld SwitchSpaces : Permissions: %c ARM PID: %2d vspace: %2d Domain: %2d Domain Mask: %lx No active domain UIP: %p queues: %c%c%c%s space: %S USP: %p tstate: %ws ready: %w.wt:%-w.wt pdir : %p sndhd : %-w.wt send : %w.wt:%-w.wt pager: %.wt waiting_for : %-w.wt blocked : %w.wt:%-w.wt Inheritance : %s ts length : 0x%x us, curr ts: 0x%x us resources: %p [ , ARM [PID: %d, vspace: %d, domain: %d, dom_mask %lx continuation: %p preemption_cont: %p scheduler: %.wt exception_handler: %.wt partner: %.wt saved partner: %.wt saved state: %s === %s == TCB: %p == ID: %p = %p/%p == PRIO: 0x%02x user handle: %p cop flags: %02x%s preempt flags: %02x [%c] incoming notify bits: %p notify mask: %p virtual sender: %t last preempted_ip: %p preempt_callback_ip: %p tcb/tid/name Message Tag: %d untyped, label = %x, flags = %c%c%c Acceptor: %p (%c) Error code: %d no valid UTCB [%d] Simple ELF (version %d): header: [paddr: %p] cmdline: %s [%d] Simple module (version %d): start: %p size: %p cmdline: %s [%d] Simple executable (version %d): text: [paddr: %p, vaddr: %p, size: %p] data: [paddr: %p, vaddr: %p, size: %p] bss: [paddr: %p, vaddr: %p, size: %p] entry: %p flags: %p label: %p cmdline: %s [%d] EFI Tables (version %d): systab: %p memmap: [addr: %p, size: 0x%x] memdesc: [version: 0x%x, size: 0x%x] Not a generic bootinfo record (bootinfo=%p). Error allocating memory for bootinfo copy Generic BootInfo @ %p magic: 0x%p version: %d size: 0x%x num records: %d [%d] Unknown record (type: 0x%x, version: %d) [%d] Multiboot info (version %d): address: %p Unknown command: %s KDB mode: Command line KDB mode: Keystroke %s [0x%lx]: Kernel memory statistics: Chunk size = %d bytes Free chunks = %d (%d%cB) Consecutive Number of chunks matches %7d%c %6d Max consecutive chunks: %d Kernel memory distribution: %16s %6d %cB Set = %p, Entries = %d Memdump wordsize = %d Continue/Quit Dump address Basic output format Global id/Tcb address/Both Version field format Inline/Separate/Off Add separator before <n> lower-most bits of thread number (0-%lu) [0]: Special threads in human readable form == Stack frame: %p == cpsr = %8lx, pc = %8lx, sp = %8lx, lr = %8lx r0 = %8lx, r1 = %8lx, r2 = %8lx, r3 = %8lx, r4 = %8lx r5 = %8lx, r6 = %8lx, r7 = %8lx, r8 = %8lx, r9 = %8lx r10 = %8lx, r11 = %8lx, r12 = %8lx tcb/tid/addr Index: %02d MVA: 0x%08x PA: 0x%08x %3s D: %2d :TLB (main set-associative): :TLB (lockdown): __ divide by 0 error Assertion handler != NULL failed in file %s, line %d (fn=%p) platform/surf/pistachio/src/irq.cc kmem_msm_kip platform/surf/pistachio/src/plat.cc Unimplemented! OKL OKL4 - (provider: Open Kernel Labs) built on Feb 4 2011 13:30:17 using gcc version 3.4.4. kernel_mutex schedule_inheritance strict_ipc_priorities virtualspaceids mem_check_in_use mem_check_already_allocated iguana/server/src/alloc.c mem_check_already_allocated(pool,mem) pd->free_token <= total_tokens pm->mem->addr == paddr free_ms <= total_new_mss obj_array_size <= total_objects free_pd <= total_new_pds free_thread <= total_new_threads free_zone <= total_new_zones iguana/server/src/bootinfo.c DMM_PHYS_POOL iguana/server/src/dmm.c dmm_physpool eas_create_thread !"This shouldn't happen" iguana/server/src/eas.c env_memsection env_virtpool env_physpool env_elf_segment_vaddr env_elf_segment_flags env_elf_segment_paddr env_elf_segment_offset env_elf_segment_filesz env_elf_segment_memsz env_elf_segment_index env_elf_file_type env_elf_file_entry iguana/server/src/env.c item->type == ENV_CONSTANT item->type == ENV_MEMSECTION item->type == ENV_THREAD item->type == ENV_VIRTPOOL item->type == ENV_PHYSPOOL item->type == ENV_ELF_SEGMENT item->type == ENV_ELF_FILE item->type == ENV_ZONE extensions_init iguana/server/src/extensions.c __okl4_environ != 0 DL Paging Initialization... <iguana_server> Error sending exception ipc in vm_pager_bsp_dload_page addr=0x%lx/%s priv=%s%s%s ip=0x%lx, sp=0x%lx pd=%p thread=0x%lx Couldn't map security hole! <iguana_server> Error sending exception ipc Unhandled page fault: is_thread(thread) iguana/server/src/iguana_server.c !"server_clist_insert failed" retval == MEM_VALID iguana_pd_mypd_impl iguana_pd_extension_create_impl iguana_memsection_set_attributes_impl iguana_dmm_physmem_in_use_impl iguana_dmm_memsection_in_use_impl iguana_statistics_get_stats_impl PHYSICAL_HWIO BSP_VIRTUAL_HWIO PANIC: Bootinfo did not initialise correctly !"Should never reach here" iguana/server/src/main.c memsection_init_dl_segment memsection_init_active_page_pool memsection_purge_dl_pages delete_memsection_from_allocator memsection_register_server memsection_map memsection_unmap memsection_set_attributes memsection_delete memload_fault_handler memsection_remove_active_page memsection_insert_active_page ms->load_count > 0 iguana/server/src/memsection.c ms->mapping_table pool_index >= 0 && pool_index < MEMSECTION_NUM_POOLS pool->memsection_active_page_list pool->memsection_load_log_list zone != NULL Unable to map the DL page Unable to map the DL page in the protected pd pool->memsection_active_page_list_count <= pool->memsection_active_page_pool_size pool->memsection_active_page_list_index <= pool->memsection_active_page_pool_size pool->memsection_active_page_list_index == pool->memsection_active_page_list_count !"Unable to map the page before loading\n" Warning: Fault on already loaded page. addr=%p memsection=%p spaceid=%x pool->memsection_active_page_list_index >= 0 pool->memsection_active_page_list_count >= 0 !"DL_PAGER was Unable to Load Page\n" ! "Unable to Load Page from flash\n" mutex_allocate free_mutexes != NULL iguana/server/src/mutex.c static_mutexes_allocated < MAX_MUTEXES objtable_delete iguana/server/src/objtable.c pd_create_session pd_create_thread pd_release_clist pd_check_state pd_sync_range pd_create_memsection_internal pd_setup_callback pd_detach_pd_extension arch_pd_attach_zone iguana/server/src/pd.c is_thread(client) is_thread(server) is_clist(clist) self != NULL ((void*) (self)) > ((void*) BASE_PAGESIZE) ((void*) (&ms->data)) > ((void*) BASE_PAGESIZE) ((void*) (&td->data)) > ((void*) BASE_PAGESIZE) ((void*) (&sd->data)) > ((void*) BASE_PAGESIZE) ((void*) (&pd->data)) > ((void*) BASE_PAGESIZE) vm != NULL && vm->mem->addr == base pd_extension->num_attachments >= 0 hash_lookup(l4spaceid_to_pd, L4_SpaceNo(new_pd->space.id)) == NULL pd_extension_create pd_ext->memsection != NULL iguana/server/src/pd_extension.c (vm_base(vm) % MIN_WINDOW) == 0 iguana/server/src/pgtable.c vend - vbase + 1 >= 0x1000 iguana/server/src/pool.c pend - pbase + 1 >= 0x1000 mem->addr == pbase mem->addr == vbase session_add_buffer session_delete session->return_buf == NULL iguana/server/src/session.c session->call_buf == NULL ((void*) (session)) > ((void*) BASE_PAGESIZE) ((void*) (session->server)) > ((void*) BASE_PAGESIZE) ((void*) (session->server->owner)) > ((void*) BASE_PAGESIZE) is_thread(session->server) __slab_cache_add slab_cache_alloc iguana/server/src/slab_cache.c chunk != NULL slab != NULL iguana/server/src/space.c r == RFL_SUCCESS L4_SpaceNo(space->id) != -1UL thread_alloc thread_setup thread_delete thread_raise_exception thread_list != NULL iguana/server/src/thread.c thread_no > 0 hash_lookup(l4tid_to_thread, thread->id.raw) == NULL is_session(sd->data) new_ip && new_sp iguana/server/src/zone.c zone->phys_pool zone->direct_pool __ %lx: divide by 0 error Iguana abort()ed Assertion failed: %s, function %s, file %s, line %d. 0123456789ABCDEF0123456789abcdef(nil) find_first_set bfl_alloc_bit (val / BITS_PER_LONG) < bfl->len libs/bit_fl/src/bit_fl.c !"no bit found" (bit / BITS_PER_LONG) < bfl->len (size & (size - 1)) == 0 libs/hash/src/hash.c tablestruct->table OKL4_DEFAULT_CLIST ARM Mode Data Abort Thumb Mode Data Abort Cannot Recover From Data Abort Unexpected System Exit (return code %d) Divide By Zero (sig %d, arg %d) Unknown Sig Raised (signal %d, argument %d) Invalid Parameter In Memop USER Mode Error: Illegal Mem Access boothw_target.c Assertion byte_ptr != NULL failed Assertion buf_ptr != NULL failed Copyright (c) 2003by QUALCOMM, Incorporated.All rights reserved. MUTEX_EVENT_CS w]LL#`h1hXC@ M{OhhL#XC9h@ Unable to attached to PlatformInfo DAL `(h `,`CH@h! HAL_GPIOINT_V1 Failed to init connection state mutex Failed to allocate connection struct Invalid BAM handle: 0x%x Invalid BAM endpt: dir %d src 0x%x dest 0x%x Failed to alloc BAM-DMA pipe: %d Invalid desc FIFO size: 0x%x Invalid data FIFO size: 0x%x I/O memory allocation failure: 0x%x Cannot get virt addr for I/O buffer: 0x%x Failed to find connection mapping SPSClient connection already allocated Failed to allocate connection Failed to connect BAM 0x%x pipe %d Failed to set BAM 0x%x pipe %d flow on Failed to activate BAM-DMA pipe: %d Failed to set BAM 0x%x pipe %d flow off Failed to disconnect BAM 0x%x pipe %d LockDisablesInterrupts TLMM_SetPort: Invalid Port id TLMM_DeviceDeInit: Device could not be reset TLMM_SwitchGpioIntOwnership: Invalid Owner Directive TLMM_DeviceInit: Device could not create a sync object SPI DM fail to get transfer result SPI DM fail to create DM TX transfer event SPI DM fail to setup TX callback event SPI DM fail to create DM RX transfer event SPI DM fail to setup RX callback event dmov_dal_dev dmov_device_spi dmov_pri_spi dmov_chan_spi_rx dmov_chan_spi_tx dmov_crci_spi_rx dmov_crci_spi_tx spi fail to attach to DM device spi fail to get data mover DAL device id spi fail to get data mover device id spi fail to get data mover priority spi fail to get DM RX channel spi fail to get DM TX channel spi fail to get DM RX CRCI spi fail to get DM TX CRCI `pGHAL_HWREV_V1 Flash: Multi 2X page read not supported! Flash: Multi 2X page write not supported! ~}|{zyxwvvutsrqqponnmllkjjihhgffeddccbaa``__^^]]\\[[ZZYYXXWWVVUUUTTSSRRRQQPPPOOONNMMMLLLKKKJJJIIIHHHGGGGFFFEEEDDDDCCCCBBBBAAA D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\api\kernel/l4/cust/msm_syscall.h !(__L4_TCR_ErrorCode()) Authors: QCT D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\services\diag\DCM\common\src\diagcomm_sio.c D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\api\kernel/l4/cust/msm_syscall.h !(__L4_TCR_ErrorCode()) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\api\kernel/l4/cust/msm_syscall.h !(__L4_TCR_ErrorCode()) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\mproc\oncrpc\oncrpc_main.c smdi_add_channel_info smdi_alloc_channel_info PQRSTUVWXYZ[PQRSTUVZX[WY D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\mproc\smd\smd_dsm_memcpy.c D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\wiredconnectivity\uart\src\siors232_mdd.c Heap 0x%x Deinit Unsuccessful, used bytes is %d Assertion (uint32*)qw1 != NULL failed Assertion (uint32*)qw2 != NULL failed Assertion (uint32*)multiplicand != NULL failed Assertion (uint32*)shifticand != NULL failed Assertion (uint32*)addend != NULL failed Assertion (uint32*)dividend != NULL failed Assertion (uint32*)subtrahend != NULL failed Assertion (uint32*)difference != NULL failed Assertion (uint32*)sum != NULL failed Assertion (uint32*)adder != NULL failed Assertion (uint32*)subtractor != NULL failed Assertion (uint32*)product != NULL failed Assertion (uint32*)quotient != NULL failed Assertion (uint32*)qw != NULL failed Assertion !("IST/ISR is not allowed to call this function\n") failed dog_keepalive Received Diag Req Pkt Size is %d Max Size For Req Pkt is %d Assertion num_allocs <= DIAG_FREEBLOCK_CACHE_SIZE failed Assertion num_allocs <= DIAG_EVENT_FREEBLOCK_CACHE_SIZE failed Assertion OSAL_SUCCESS == return_val failed Received Remote Dog Keepalive ACK dog_keepalive.c Dog Keepalive client %d time out Assertion failure: ( 0) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa_plugins.c:184 npa_plugins.c clkrgm_sdram.c Unsupported SDRAM perf level: sdram_clk=%d SDRAM clk switch: intf[%d]: %d -> %d Hz clkrgm_mpss_bist.c Unable to set voltage for QDSP6 SMPS PMIC (ID:%d)! Unable to get vote for QDSP6 FW PMIC ID:%d! Unable to get vote for QDSP6SW PMIC ID:%d! Unable to set voltage for QDSP6 %d PMIC ID:%d! clkrgm_mpss_q6ss.c Assertion DSM_POOL_ITEM_SIZE(pool) == 0 failed Assertion buf != NULL || len == NULL || *len == 0 failed Assertion item_ptr->references == 0 failed Assertion offset == 0 failed Assertion len > 0 failed Assertion table != NULL failed Assertion buf != NULL failed Assertion pkt_head_ptr != NULL failed Assertion pkt_head_ptr != NULL && *pkt_head_ptr != NULL failed Assertion pkt_tail_ptr != NULL failed Assertion (*dup_ptr)->dup_ptr != NULL failed Assertion table->free_count <= table->item_count failed DSM: Invalid mem level dsm_split: Trying dsm_split_packet on a free item dsm_dup_packet: Trying to dup free item iterator function must be valid pointer Second argument tail pointer references a non-null value:ref 0x%x Mem block from pool of invalid or corrupt block: %p Mem pool: %p empty (no contiguous block) Mem pool: %p block too large (size %lu) oncrpc_mem.c Assertion !(((oncrpc_mem_node_hdr_type *)block)->state & 0x80) failed Assertion pool->initialized_cookie == (0x1DEADCA7) failed Assertion mem_buf != 0 failed Assertion pool != 0 failed Assertion max_levels > 0 failed Assertion mem_buff != NULL failed Assertion max_levels <= ONCRPC_MAX_LEVELS failed Assertion pool->mem_pool_size >= pool->max_block_size failed Mem pool: %p uninitialized MEM: Block %p and buddy %p not in same pool Mem free of unallocated block: %p MEM: Overflow Check Failed %p Dropping rest of the packet. Wrote %d of %d bytes. oncrpc_rtr.c xprtrtr_init_xdr: could not init xdr_std xprtrtr_init_xdr: could not init pacmark rpc_router_core: rpc_router_read failed, pClientBuff:0x%08x, pClient:0x%08x, rpc_router_core: rpc_router_read failed returning %d rpc_router_core: rpc_router_read failed returning:%d rpc_router_core: rpc_router_write failed rpc_router_core: get_write_access failed rpc_router_core: attempt to write to unknown client: Processor:0x%08x, Process:0x%08x . rpc_router_core: failed to initialize database... rpc_router_core: failed to open worker handle, exiting... rpc_router_core: failed to start local transport, exiting... rpc_router_core: failed to send control message to xport: %d, port: %d. rpc_router_core: attempt to write invalid message pWriteBuff:0x%08x, pClient:0x%08x, size:%d. rpc_router_core: transport not opened. rpc_router_core: full client queue, packet dropped. rpc_router_core: failed to register source of received message. rpc_router_core: failed to send local message. rpc_router_core: failed to write control message. rpc_router_core: failed to send hello message. rpc_router_core: rpc_router_write failure. rpc_router_core: rpc_router_write_control_msg failure. rpc_router_core: memory allocation failure. rpc_router_core: register server failure. rpc_router_core: unregister server failure. rpc_router_core: register client failure. rpc_router_core: unregister client failure. rpc_router_core: memcpy failure. rpc_router_core: invalid transport state. rpc_router_core: full client queue. rpc_router_core: reader woken up without valid buffer. rpc_router_core: rx_cb returned invalid buffer. rpc_router_core: invalid parameter. rpc_router_core: failed to register other router. rpc_router_core: local transport is not initialized yet. rpc_router_core: received NULL ppBuff from transport. rpc_router_core: post init failed, transport 0x%08x, port 0x%08x. rpc_router_core: failed to initiate transport 0x%08x, port 0x%08x. rpc_router_core: failed to send hello to transport 0x%08x, port 0x%08x. rpc_router_core: failed to stop transport 0x%08x, port 0x%08x. rpc_router_core: rpc_router_read failed returning %d Could not find route: processor id=%d, client id=%d rpc_router_core: illegible message. Unrecoverable state rpc_router_core: local write failed with error: %x rpc_router_core: writing control header failed with error: %x rpc_router_core: Unknown client 0x%x, processor=0x%x return dummy buffer rpc_router_core: Failed to lock semaphore %x rpc_router_core.c INVALID REMOTE SMD COMMAND smd lp flwctl: byte_count = %d Assertion SMD_STREAM_OPEN(info) failed Assertion info->dtr_callback_fn failed Assertion info->dtr_callback_ext_fn failed SMD Task command buffer not available smd_init: SMD protocol version (%d) does not match Invalid transfer mode=%i for port=%i SMD_IOCTL_ABORT_RX: No clnt callback SMD_IOCTL_ABORT_TX: No clnt callback Invalid loopback state/bytes_read count Assertion failure: ( NULL != (pWC)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\utils\src\CoreWorkContainer.c:94 Assertion failure: ( pWC->pfnGet && pWC->pfnProcess) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\utils\src\CoreWorkContainer.c:95 CoreWorkContainer.c Unknown MSM! FEATURE_DSM_WM_TRACING is not defined. DSM WM POINTER IS NULL Assertion wm_ptr->current_cnt == 0 failed Assertion queue != NULL failed Assertion wm_ptr != NULL failed Assertion wm_ptr->q_ptr != NULL failed Assertion temp_ptr->pkt_ptr == NULL failed Assertion (*pkt_head_ptr)->link.next_ptr == NULL failed dsm_enqueue: Impossibly small dont exceed level dsm_enqueue: Invalid Parameter oncrpc_pacmark.c invalid mid %d xport returned invalid pacmark buffer. size %d xport returned invalid pacmark buffer. size %d frag size %d ran out of mids PING ERROR: PING TEST 1001 FAILED, %d errors PING ERROR: checksum error, received 0x%08x, expected 0x%08x PING ERROR: TEST FAILED! PING ERROR: PING MDM Server not found on remote processor. Exiting... PING ERROR: PING MDM Server not found on remote processor. Aborting... PING ERROR: TEST FAILED PING: TEST PASSED PING: Test PASSED ping_mdm_callback.c PING ERROR: ERROR at data size=%d PING ERROR: PING TEST 1001 FAILED, no callbacks received PING WARN: Auto-UnRegister with server smd_packet_memcpy.c Assertion (pi->rx_bytes_remaining - bytes_read) <= pi->rx_bytes_remaining failed smd_packet_memcpy_rx bad state smd_packet_memcpy_tx bad state HALmaoPlatform.c Invalid index into register file Invalid SSBI port number Invalid register file access Assertion failure: ( NULL != (cb)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\sleep\src\common\sleep_events.c:90 Assertion failure: ( NULL != (cb)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\sleep\src\common\sleep_events.c:72 Assertion failure: ( NULL != (sleep_handle)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\sleep\src\common\sleep_events.c:57 sleep_events.c sio_wrapper.c Assertion index <= SIO_MAX_DRIVERS failed Assertion ret failed I2C ERROR: Invalid Bus Id, I2C ERROR: Operation Failed, I2C ERROR: Invalid Interface, I2C ERROR: Bus Not Idle, I2C ERROR: Invalid Byte Transfer Wait Time, I2C ERROR: Bus Not in Tx or Idle State, I2C ERROR: Bus Not in Tx State, I2C ERROR: Invalid Data Length, I2C ERROR: Invalid Bus Clock, I2C ERROR: Write Buffer Full, I2C : Operation Successfull, I2C ERROR: Invalid Parameter, I2C ERROR: DAL Error, I2C ERROR: Invalid Access, I2C ERROR: Bus Acquisition Timeout, I2C ERROR: Byte Transfer Timeout, I2C ERROR: Bus Not Ready, I2C ERROR: Read Buffer Empty, I2C ERROR: I2C Clock was reset, I2C ERROR: Power Event failed I2C ERROR: No ACK from Slave I2C ERROR: Power State not Active I2C ERROR: Invalid Device properties I2C ERROR: Bus Idle Wait Timeout Invalid device id %d. Unsupported clk source. Internal error. uart_compat.c Unsupported Baudrate: UART-DM does not support requested baud rate Failure configuring gpios. Baudrate 230400 not available on this UART Baudrate 460800 not available on this UART Invalid bit-rate, cat't set RXLEV siors232_dm_lite.c Assertion rs_port->gv.sio_uart_flow_rxlev < (rs_port->gv.rx_fifo_size / 4) failed Assertion (UART_DEVICE_FIRST <= device_id) && (device_id < UART_DEVICE_LAST) failed Assertion snap_value != 0 failed Assertion i != 0 failed Assertion rs_func failed Assertion rs_port->gv.is_wakeup_isr_registered failed Assertion mdd_callback failed Invalid bit-rate OKL4_NAMING_SERVER Register values from coredump: %12s : 0x%08x Stack Dump (from 0x%08x): Addr Data 0x%08x 0x%08x Stack data not dumped. REX_TCB ptr: 0x%08x tcb.task_name: %s Coredump ARCH type is: %s Error in file %s, line %d Error message: %s Uptime (h:m:s): %d:%02d:%02d Build ID: %s ERR crash log report. Version %d. End of crash log report. Intlock_prof: Error marking intlock Intlock_prof: Error marking intfree #)-3AEI7=M<<<<<<<7=M<<<<<<<7=Mi diag_cmd_req_task_startup !&,3=I<<<<V^els <<<<<<<<<<<<<<<<<<<< diagdiag_test_task MUTEX_DIAGDIAG_MEMOP_CS /core/systemdrivers/clkregim/cpursrc /core/systemdrivers/clkregim/devman RHQI@hL"BC hS DEM Notification Vote API Mutex HAL_MAOINT_V1 #'+/37;?CGKOSW[_c( I2C %s, %s %d max_bus_clock_suported standard_if_pullup auxiliary_if_pullup use_pic_i2c_interrupt_bit interrupt_id use_multiproc_sync std_gpio_config_arr aux_gpio_config_arr Channel number contained in transfer token invalid Driver initialized successfully Driver failed to destroy sync object Driver DeInit successfully Non existing device id Dmov_DeviceInit : Clocks are not going to be managed req_pool_size Driver failed to allocate memory for the transfer request pool Driver failed to allocate CLP memory Driver failed to allocate memory for Channels DMOV Device Initialized! interrupt_id Device failed to get interrupt_id property Device failed to open Interrupt Controller Device failed to attach to Interrupt Controller Device failed to register ISR Device failed to unregister ISR DMOV Device DeInit: Failed to detach from Int Ctrl DMOV Device DeInit: Failed to close Int Ctrl Driver failed to free CL/CLP memory Driver failed to free channel memory Failed to register the client - Ran out of handles! Failed to deregister the client Dmov_Close: Client %s was not open DMOV Transfer: called by %s without opening the handle DMOV Transfer: called by %d without opening the handle Device Transfer: Transfer request is invalid Device Transfer: Failed to queue the transfer command DMOV_GetTransferResult: called by %s without opening the handle DMOV_GetTransferResult: called by %d without opening the handle DMOV GetTransferResult: DMOV device doesn't exist DMOV_GetTransferResult: token is invalid: %d DMOV Get Transfer Result: Client's DMOV device doesn't exist DMOV set chan mode: invalid channel number: %d DMOV set chan mode: channel %d not controlled by this processor Dmov_FlushChannel: called by %s without opening the handle Dmov_FlushChannel: called by %d without opening the handle DMOV Flush Channel: invalid channel number: %d DMOV Flush Channel : Cannot flush an inaccessible channel %d DMOV Flush Channel: invalid channel %d state: %d Dmov_FlushDomain: called by %s without opening the handle Dmov_FlushDomain: called by %d without opening the handle DMOV Flush Domain: DMOV device not running on secure proc DMOV Flush Domain: DMOV device doesn't exist DMOV Flush Domain: Security Domain %d doesn't exist DMOV Flush Domain Error: Domain %d is local DMOV Flush Domain Error: failed to flush channel %d Failed to enable clock for BAM-DMA: %x Failed to enable BAM DMA's BAM: %x Failed to disable BAM-DMA %x: channels are active Failed to disable BAM-DMA %x BAM Failed to disable clock for BAM-DMA %x BAM-DMA: max devices exceeded Unable to map BAM DMA IO memory: %x %x BAM-DMA: not registered: %x BAM-DMA: channel not free: %d BAM-DMA: pipe not inactive: %d Failed to register BAM device: phys 0x%0x BAM-DMA: BAM limit exceeded: %d BAM-DMA: invalid BAM handle: %x BAM-DMA: channel %d state error: %d %d BAM-DMA: attempt to free active chan %d: %d %d BAM-DMA: wrong direction for BAM %x pipe %d BAM-DMA: invalid BAM: %x BAM-DMA: BAM %x invalid pipe: %d BAM-DMA: BAM %x pipe %d already active BAM-DMA: invalid BAM BAM-DMA: BAM %x pipe %d not active pGpGpGpGpGpGpG TLMMGPIO1SH2 ChipIdOverride FPGA_PLATFORM FPGA_PLATFORM_CNTR FPGA_CLK_DELAY FPGA_PLATFORM_MAP MAX_PLATFORMS FPGA_PLATFORM_CODES FPGA_DeviceInit: Device could not create a sync object DUAL_DEBUG_PORT FPGA_LED_HDR FPGA_LED_BITSHIFT Timetick could not attach to timer device Timetick_CvtToSclk: Invalid timetick conversion %d Timetick_CvtFromSclk: Invalid timetick conversion %d Timetick_CvtToUsec: Invalid timetick conversion %d Timetick_CvtFromUsec: Invalid timetick conversion %d Timetick_CvtToSclk64: Invalid timetick conversion %d Timetick_CvtFromSclk64: Invalid timetick conversion %d Timetick could not create the timer event Timetick could not setup the timer event Timetick_GetSclk64: timetick_sclk64 has not been initialized! Dmovi_MoveToNotifyQueue: no transfer descriptor available DMOV Issue Cmd: Invalid channel %d state: %d DMOV Issue Cmd: Command issued DMOV Issue Cmd: Invalid transfer type %d for channel: %d DMOV Queue Cmd: Out of free Transfer Descriptors DMOV Queue Cmd: Unknown transfer type %d for channel %d DMOV Queue Cmd: Transfer successfully queued! DMOV Request not Valid: invalid channel number DMOV Request not Valid: Device does not have access to channel DMOV Request not Valid: Command list not on 64-bit boundary DMOV Request not Valid: Interrupt mode mismatch device/channel DMOV Request not Valid: Client issued max transfers DMOV Request not Valid: Invalid number of commands DMOV Request not Valid: invalid device state DMOV Request not Valid: invalid channel state DMOV Get Chan %d Error: Data-phase bus error occured DMOV Get Chan %d Error: Command error occured DMOV Get Chan %d Error: Command-phase bus error occured DMOV Get Chan %d Error: MPU error occured DMOV Get Chan %d Error: Length error occured DMOV Get Chan %d Error: Unknown error occured DMOV Flush Handler: hardware channel %d halted DMOV Stop Handler: Channel already stopped DMOV Stop Handler: channel %d internal state error: %d DMOV Stop Handler: cannot stop channel %d, commands pending DMOV Stop Handler: cannot stop channel %d, issuing commands DMOV Stop Handler: Stopping the channel hardware DMOV Stop Handler: Channel stopped DMOV Read Result: Result FIFO is empty DMOV Read Result: Channel %d error occurred DMOV Read Result: Channel %d flush occurred DMOV Chan Handler: Channel %d not active DMOV Flush Domain: DMOV device not running on secure proc DMOV Flush Remote Chan %d: flush state time out DMOV Flush Remote Chan %d: result time out `pG0K0JXCT#YC `pG%K%JXCT#YC `pG6K6JXCT#YC hpG*K*JXCT#YC \"&*\.<J\\X\X a&H a&H`a&H b&H`b&H D:.'...47. .= !(__L4_TCR_ErrorCode()) 0123456789ABCDEF 0123456789abcdef D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\api\kernel/l4/cust/msm_syscall.h !(__L4_TCR_ErrorCode()) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\api\kernel/l4/cust/msm_syscall.h !(__L4_TCR_ErrorCode()) hs_event_buffer_insert D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\api\kernel/l4/cust/msm_syscall.h !(__L4_TCR_ErrorCode()) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\modem\mcs\dsm\src\dsm_init.c D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\api\kernel/l4/cust/msm_syscall.h !(__L4_TCR_ErrorCode()) GPIO Interrupt Controller: Device could not create a sync object GPIO Interrupt Controller:GPIOIntr_DeregisterIsr : This is a proxy interrupt 8ZD:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\buses\spi\dal\src\common\DalSpiDm.c:1770 0123456789abcdef 0123456789ABCDEF @@@@@@@@@AAAAA@@@@@@@@@@@@@@@@@@ Assertion src != NULL failed Assertion dst != NULL failed ERR_ARCH_QDSP6 ERR_ARCH_ARM ERR_ARCH_UNKNOWN ARM_JVA_SPSR ARM_SVC_SPSR ARM_UDF_SPSR ARM_FIQ_SPSR ARM_IRQ_SPSR ARM_ABT_SPSR Invalid SMEM buffer size requested for memory %d. Invalid SMEM memory type, %d, requested. Invalid memory type %d Out of shared memory have %d requested %d for %d The smem allocation table is too small Can't initialize heap info SMEM layout mismatch for %d %x != %x hw_reset: cannot attach to the TLMM DAL hw_reset: cannot attach to ChipInfo DAL Tramp not ready! Invalid trigger: %d Unhandled interrupt: %d [tramp_is_interrupt_enabled] Invalid interrupt: %d [tramp_install_irq] Invalid interrupt: %d [tramp_set_interrupt_trigger] Invalid interrupt: %d [tramp_register_isr] Invalid interrupt: %d [tramp_deregister_isr] Invalid interrupt: %d [tramp_send_interrupt] Invalid interrupt: %d [tramp_enable_interrupt] Invalid interrupt: %d [tramp_disable_interrupt] Invalid interrupt: %d [tramp_clear_interrupt] Invalid interrupt: %d [tramp_trigger_interrupt] Invalid interrupt: %d [tramp_set_interrupt_port] Invalid interrupt: %d [tramp_set_interrupt_priority] Invalid interrupt: %d Overwriting control for irq %d [tramp_deregister_isr] Invalid isr for irq %d tramp_init could not create sync object ONCRPC stack allocation failure SMD stack allocation failure DIAG stack allocation failure HS stack allocation failure Dog keepalive stack allocation failure Dog stack allocation failure Dem stack allocation failure Sleep stack allocation failure Timer stack allocation failure Invalid detect/polarity: %d %d resource "%s" { active_state %d active_max %d active_headroom %d request_state %d watermark_event "%s" { hi_watermark %d lo watermark %d client "%s" { client_type %s request %d alias "%s" "%s" placeholder "%s" change_event "%s" Assertion failure: ( DAL_SUCCESS == (DALSYS_EventCtrlEx(client->continuation->data.client.enqueue_event,0x00000100,0,0,0))) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:1100 Assertion failure: ( DAL_SUCCESS == (DALSYS_DestroyObject( resource->node_lock ))) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:400 Assertion failure: ( client->resource == resource) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:1600 Assertion failure: ( DAL_SUCCESS == (DALSYS_EventCtrlEx( dal_event, 0x00000100, event_type, (int *)data, data_size ))) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:2420 Assertion failure: ( strlen( client_name ) < 64) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:820 Assertion failure: ( DAL_SUCCESS == (DALSYS_EventCreate( 0x00000010, &continuation->data.client.enqueue_event, 0 ))) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:1930 Assertion failure: ( NULL != (continuation)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:1240 Assertion failure: ( NULL != placeholder) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:540 Assertion failure: ( NULL != client) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:1050 Assertion failure: ( NULL != (client)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:1760 Assertion failure: ( NULL != (resource)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:1570 Assertion failure: ( NULL != (callback)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:970 Assertion failure: ( !( ( NULL != definition->plugin->create_client_fcn ) && ( NULL != definition->plugin->create_client_ex_fcn ) )) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:790 Assertion failure: ( DAL_SUCCESS == (DALSYS_DestroyObject( resource->event_lock ))) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:401 Assertion failure: ( NULL != (client)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:1711 Assertion failure: ( NULL != (callback)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:1121 Assertion failure: ( NULL != client->resource) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:1051 Assertion failure: ( NULL != (client->continuation)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:1761 Assertion failure: ( NULL != (definition)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:771 Assertion failure: ( NULL != (cb_event)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:302 Assertion failure: ( DAL_SUCCESS == (DALSYS_SyncCreate(0x00000010, &resource->node_lock, 0))) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:502 Assertion failure: ( NULL != (definition)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:1122 Assertion failure: ( DAL_SUCCESS == (Core_WorkQueueCreate( &npa.npa_event_queue_handle, npa_async_event_handler, config_data->event_queue_allocation.initial, config_data->event_queue_allocation.subsequent, sizeof(npa_event_trigger) ))) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:1332 Assertion failure: ( NULL != (placeholder)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:1162 Assertion failure: ( NULL != (npa_config_data)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:1362 Assertion failure: ( NULL != (vector)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:1762 Assertion failure: ( NULL != (node_definition)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:772 Assertion failure: ( NULL != (continuation)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:1282 Assertion failure: ( NULL != (client)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:1682 Assertion failure: ( DAL_SUCCESS == (DALSYS_DeleteEventFromWorkLoop( npa.async_request_handle, event ))) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:2023 Assertion failure: ( NULL != (&definition->resources[0])) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:1123 Assertion failure: ( NULL != (event)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:2123 Assertion failure: ( DAL_SUCCESS == (DALSYS_SyncCreate(0x00000010, &node_lock, 0))) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:1133 Assertion failure: ( (NULL != definition->resources) && (definition->resource_count > 0)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:1433 Assertion failure: ( NULL != (resource)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:433 Assertion failure: ( NULL == npa.resources) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:2633 Assertion failure: ( NULL != (client)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:1733 Assertion failure: ( NULL != (event)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:553 Assertion failure: ( 0) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:1753 Assertion failure: ( NULL != (resource_def->handle = npa_new_resource( resource_def, definition, node_lock ))) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:1163 Assertion failure: ( NULL != (resource = Core_PoolAlloc( &npa.resource_pool ))) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:773 Assertion failure: ( NULL != (event)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:973 Assertion failure: ( NULL == link->prev) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:2593 Assertion failure: ( NULL != (pool)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:1314 Assertion failure: ( NULL != (alias_name)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:1514 Assertion failure: ( DAL_SUCCESS == (Core_WorkQueuePut(npa.npa_event_queue_handle, trigger))) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:714 Assertion failure: ( NULL != (definition)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:1424 Assertion failure: ( NULL != (client)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:1824 Assertion failure: ( NULL != (name)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:434 Assertion failure: ( NULL != placeholder) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:534 Assertion failure: ( NULL != (client)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:2254 Assertion failure: ( DAL_SUCCESS == (ULogFront_RealTimeInit(&dump_log, "NPA Dump Log", dump_log_size, (ULOG_MEMORY_CONFIG_LOCAL | ULOG_MEMORY_USAGE_FULLACCESS | ULOG_ALLOC_LOCAL), ULOG_LOCK_OS ))) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:2554 Assertion failure: ( NULL != (callback)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:554 Assertion failure: ( NULL != (event)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:2264 Assertion failure: ( NULL != (event)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:2084 Assertion failure: ( 0 == strcmp( continuation->data.alias.resource_name, (const char *)cb_data )) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:1284 Assertion failure: ( npa_is_placeholder_resource( resource )) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:384 Assertion failure: ( resource->clients == client) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:2005 Assertion failure: ( NULL != (continuation)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:2305 Assertion failure: ( DAL_SUCCESS == (DALSYS_SyncCreate(0x00000010, &resource->event_lock, 0))) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:505 Assertion failure: ( NULL != (trigger)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:605 Assertion failure: ( NULL != (config)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:1315 Assertion failure: ( DAL_SUCCESS == (DALSYS_DestroyObject( event ))) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:2025 Assertion failure: ( DAL_SUCCESS == (DALSYS_AddEventToWorkLoop( npa.async_request_handle, npa_issue_async_request, client, continuation->data.client.enqueue_event, 0 ))) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:1935 Assertion failure: ( DAL_SUCCESS == (DALSYS_DestroyObject( resource->node_lock ))) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:355 Assertion failure: ( NULL != (continuation)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:755 Assertion failure: ( DAL_SUCCESS == (DALSYS_SyncCreate(0x00000010, &npa.lock, 0 ))) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:1365 Assertion failure: ( NULL != (trigger->resource)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:606 Assertion failure: ( DAL_SUCCESS == (Core_WorkQueueAlloc(npa.npa_event_queue_handle, (void **)&trigger))) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:706 Assertion failure: ( NULL != (client)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:1616 Assertion failure: ( NULL != (resource)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:2126 Assertion failure: ( NULL != (node = resource->node)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:346 Assertion failure: ( NULL != (resource_name)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:2376 Assertion failure: ( NULL != (resource)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:1976 Assertion failure: ( NULL != (resource)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:2086 Assertion failure: ( NULL != (resource)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:496 Assertion failure: ( NULL != (client)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:1807 Assertion failure: ( NULL != (link)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:437 Assertion failure: ( !npa_is_link_valid( placeholder )) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:447 Assertion failure: ( NULL != (resource)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:1547 Assertion failure: ( ( 0 == num_resources ) || ( NULL != resources )) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:2357 Assertion failure: ( DAL_SUCCESS == (DALSYS_RegisterWorkLoop( npa_config_data->async_request_workloop.priority, npa_config_data->async_request_workloop.num_events, &npa.async_request_handle, 0 ))) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:1377 Assertion failure: ( NULL != (callback)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:2377 Assertion failure: ( DAL_SUCCESS == (Core_RegisterContainerWorkLoop( config_data->async_event_workloop.priority, &npa.npa_event_handle ))) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:1328 Assertion failure: ( NULL != (initial_state)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:1428 Assertion failure: ( NULL != (dependency->handle = npa_create_sync_client_ex( dependency->name, definition->name, dependency->client_type, 0, 0 ))) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:1148 Assertion failure: ( new_state <= resource->active_max) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:1548 Assertion failure: ( NULL != (client)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:848 Assertion failure: ( NULL != (callback)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:2358 Assertion failure: ( NULL != (placeholder)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:1458 Assertion failure: ( NULL != (resource_name)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:2168 Assertion failure: ( NULL != (resource)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:968 Assertion failure: ( NULL != (resource_name)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:1509 Assertion failure: ( NULL != (dal_event)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:2419 Assertion failure: ( NULL != (resource_name)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:519 Assertion failure: ( NULL != (resource)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:1619 Assertion failure: ( NULL != (client_name)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:819 Assertion failure: ( DAL_SUCCESS == (Core_AddContainerToWorkLoop( npa.npa_event_queue_handle, npa.npa_event_handle ))) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:1339 Assertion failure: ( DAL_SUCCESS == (DALSYS_DestroyObject( resource->event_lock ))) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:339 Assertion failure: ( DAL_SUCCESS == (ULogFront_RealTimeInit(&npa.log, "NPA Log", npa_config_data->log_buffer_size, (ULOG_MEMORY_CONFIG_LOCAL | ULOG_MEMORY_USAGE_FULLACCESS | ULOG_ALLOC_LOCAL), ULOG_LOCK_OS ))) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:1369 Assertion failure: ( strlen( event_name ) < 64) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:969 Assertion failure: ( ( resource->definition->plugin->supported_clients & plugin->supported_clients ) == resource->definition->plugin->supported_clients) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:1579 Assertion failure: ( NULL != (client)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\npa.c:1789 Assertion pkt_ptr->command_code == DIAG_SUBSYS_CMD_VER_2_F failed Assertion pkt_ptr != NULL failed Invalid pointer used for diag buffering Buffer overrun on packet at 0x%x event_q_get returned NULL! Out of clients! clkrgm_devman.c Could not find speed change handler %x for device %d Unsupported request: req=%d, device=%d [DevMan] Request: device=%d, request=%d, param=%d [DevMan] Client %d registered [DevMan] Client %d deregistered clkrgm_msmc.c Invalid msmc request: reg=%d xdr_string: oncrpcxdr_mem_alloc returned NULL! oncrpcxdr_mem_alloc: Failed to allocate oncrpc buffer (%d) oncrpcxdr_mem_alloc: passed size of 0 oncrpc_xdr.c Unknown size %d xdr_bytes: invalid x_op %x xdr_free_reply_header: badly formatted reply Failed to create rtr server transport. Failed to register RPC program %d-%d on rtr transport. oncrpc_plugger_server.c Unknown protocol %d Assertion NULL != curr failed Assertion NULL != element failed PING WARN: A test is already in progress. Try again later. ping_mdm_client.c PING ERROR: APC Called with unknown test Assertion lock_ptr != NULL failed oncrpc_svc_auth.c Assertion auth->oa_base == NULL failed ping_mdm_forward.c PING ERROR: TEST FAILED for data_size_words=%d PING: TEST PASSED: Completed after %d ms rpc_router_database: memory allocation failure. rpc_router_database: duplicate server registrations. Prog: %x, Ver1: %x, Ver2: %x. rpc_router_database: Invalid processor ID %d rpc_router_database.c Assertion flush_cb != NULL failed Assertion dm_rx_buf_filled != NULL failed Assertion dm_tx_buf_filled != NULL failed Assertion get_rx_dm_buf != NULL failed Assertion get_tx_dm_buf != NULL failed Assertion rx_callback_fn != NULL failed Assertion tx_callback_fn != NULL failed Assertion rx_flowctl_fn != NULL failed smd_dsm_memcpy.c Invalid packet size %d Assertion info->rx_tail_ptr != NULL failed smd_memcpy.c Invalid index %x Invalid Bus Id Operation Failed Invalid Interface Bus Not Idle Invalid Byte Transfer Wait Time Bus Not in Tx or Idle State Bus Not in Tx State Invalid Data Length Invalid Bus Clock Write Buffer Full Operation Successful Invalid Access Clock was reset Bus Acquisition Timeout Byte Transfer Timeout Bus Not Ready Read Buffer Empty Assertion failure: ( DAL_SUCCESS == (DALSYS_Malloc( sizeof( CoreOpaqueHandleTable ), ( void ** )&new_tables[i] ))) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\utils\src\CoreOpaqueHandle.c:111 Assertion failure: ( DAL_SUCCESS == (DALSYS_SyncCreate(0x00000010, &state.lock, &state.lockObj ))) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\utils\src\CoreOpaqueHandle.c:132 Assertion failure: ( index <32) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\utils\src\CoreOpaqueHandle.c:156 Assertion failure: ( DAL_SUCCESS == (DALSYS_Malloc( size, (void **)&new_tables ))) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\utils\src\CoreOpaqueHandle.c:89 CoreOpaqueHandle.c Software flow control not supported! (RX bitrate) != (TX bitrate) Invalid Port ID siors232_mdd.c Invalid/unsupported SIO IOCTL command %d Unknown sio mode %d Assertion ( pkt_len <= item_ptr->size ) failed Assertion mdd_port->gv.sio_bytes_to_tx > 0 failed Assertion ( mdd_port->gv.sio_tail_char_used) == FALSE failed Assertion mdd_port->gv.sio_stream_open_rx == TRUE failed Assertion mdd_port->gv.sio_stream_open_tx == TRUE failed Assertion mdd_port->gv.sio_rx_dsm_pool != NULL failed Assertion close_func_ptr != NULL failed Assertion flush_func_ptr != NULL failed Assertion mdd_port->gv.sio_tx_current_wm_item_ptr == NULL failed Assertion new_bitrate < SIO_BITRATE_MAX failed Assertion new_rx_bitrate < SIO_BITRATE_MAX failed Assertion mdd_port->gv.open_stream_id == stream_id failed Assertion new_tx_bitrate == new_rx_bitrate failed Assertion open_ptr->rx_bitrate == open_ptr->tx_bitrate failed Assertion pkt_len <= item_ptr->size failed Multiple UARTS in 'data call' mode Invalid SIO stream mode Multiple UARTS in Autodetect mode Incorrect MDD callback type Invalid Port ID=%x /node/clk/msm.state MUTEX_EVENT_CS MUTEX_EVENT_Q_LEN_CS MUTEX_EVENT_RPT_LAST_CS MUTEX_EVENT_SEC_CS MUTEX_EVENT_Q_LEN_SEC_CS MUTEX_EVENT_RPT_LAST_SEC_CS x(p y(q`yhq x(p y(q`yhq x(p y(q`yhq multiproc_sync tod_multiproc_sync wince_bootloader export_time_remote_atom oncrpc_server_cleanup_support tod_sync_pmic_rtc time_tod_as_rtc_offset use_pmic_rtc time_dem_sync use_timer_task use_os_memory_protection timer_trace_enabled timer_requires_odd_write timetick_int_edge_triggerred define_active_timer build_boot_chain no_tai_wrapper time_umts_target power_collapse clkrgm_mpss_bist Unable to attached to ChipInfo DAL remote_server_cfg_ptr remote_client_cfg_ptr Server WorkLoop - Unknown msg_id %d Remote Server not ready for receives DAL Remote Server port configured more than once DAL num ports more than max allowable X`XhxL @X`Xhg <C\`\hmO<@\`\h <@ CX`XhVL @X`Xhg cHpGcHpGcHpG _HpG_HpG_HpG SPS de-init: %d BAMs are still registered SPS clock init failed SPS memory init failed Unable to allocate driver state struct Failed to init driver state mutex Failed to process DAL memory section properties Failed to init SPS resource manager SPS BAM driver init failed SPS BAM DMA driver init failed SPS connection mapping init failed De-init client in connected state: 0x%x Connection not in connected state Client not owner of BAM 0x%x pipe: %d (max %d) Client context is corrupt Invalid BAM device handle: 0x%x Failed to register event for BAM 0x%x pipe %d Failed to reset BAM device: 0x%x ``h!hH`0hAlI Config pointer is NULL Unsupported ownership state: %d I/O memory allocation failure: 0x%x 0x%x Invalid properties for BAM: %x Invalid device ctrl properties for BAM: %x Invalid pipe ctrl properties for BAM: %x BAM already registered: %x Unable to map BAM IO memory: %x %x Unable to allocate BAM device state: size 0x%x Unable to init BAM mutex Setting EE for BAM %x to non-zero Failed to init BAM device: phys 0x%0x Failed to init BAM-DMA device: BAM phys 0x%0x `!hhhIhH`!h0h h h `ph@h``kH8 HAL_BAM_VERSION_1.1 Cannot get virt addr for I/O buffer: 0x%x $(,048<@DHLPTX\`dimquy} Unable to access DAL System Driver Unable to access DAL Timer Driver %EGXcdefginopstux <NULL REFERENCE FORMAT STRING> <NULL REFERENCE> Flash: Failed to do initialization for probe! `pGQFPROM Version 00.01.00 !(__L4_TCR_ErrorCode()) ~}|{zyxwvvutsrqqponnmllkjjihhgffeddccbaa``__^^]]\\[[ZZYYXXWWVVUUUTTSSRRRQQPPPOOONNMMMLLLKKKJJJIIIHHHGGGGFFFEEEDDDDCCCCBBBBAAA Stack pointer (0x%08x) out of range of current tcb stack limits No stack pointer recorded (or SP is NULL)...stack data not dumped. hs_apc_enqueue hsi_init_plugins Intlock_prof: queue function called when interface uninitialized! Intlock_prof: Error Message Buffer Overflow - please increase the size of the error message queue in intlock_prof.c! Intlock_prof: dequeue function called when interface uninitialized! Intlock_prof: Error in profiling timer - negative time encountered. D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\mproc\oncrpc\oncrpc_main_rex.c D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\api\kernel/l4/cust/msm_syscall.h !(__L4_TCR_ErrorCode()) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\mproc\oncrpc\oncrpc_rtr.c D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\api\kernel/l4/cust/msm_syscall.h !(__L4_TCR_ErrorCode()) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\buses\i2c\dalpd\legacy\src\common\DALI2CPD.c DMOV GetTransferResult: poll a chan whose domain NOT controlled by local processor Dmov_SetChanOperationMode: called by %s without opening the handle Dmov_SetChanOperationMode: called by %d without opening the handle DMOV set chan mode: channel %d can not be configured to interrupt mode Unable to allocate memory sections array: %d sections, size 0x%x Dmovi_MoveToNotifyQueue: put pending transfer to DONE queue without notification DMOV Request not Valid: Boot and Tools should allocate their own command list memory DMOV Stop Handler: hardware channel %d error occured during stop DMOV Read Result: no active transfers, clock may be off, returning! DMOV Read Result: result with no pending Transfer on channel %d! D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\wiredconnectivity\uart\src\siors232_mdd_data.c Value truncated from %f to %i (%s, %u) Value truncated from %i to %i (%s, %u) Value truncated from %lli to %i (%s, %u) Value truncated from %u to %i (%s, %u) Value truncated from %llu to %i (%s, %u) Value truncated from %f to %lli (%s, %u) Value truncated from %llu to %lli (%s, %u) Value truncated from %f to %u (%s, %u) Value truncated from %i to %u (%s, %u) Value truncated from %lli to %u (%s, %u) Value truncated from %u to %u (%s, %u) Value truncated from %llu to %u (%s, %u) Value truncated from %f to %llu (%s, %u) Value truncated from %lli to %llu (%s, %u) Assertion bits<32 failed Error: Previous failures detected. Aborting log file creation. Error detected on remote processor. Error detected on remote system via GPIO %d err_f3_trace.c Forced core dump %d, %d, %d clkrgm_sources.c Reconfiguring local active PLL: %d [clk_regime_is_source_enabled] Source out of range: %d [clk_regime_is_source_client] Client out of range: %d [clk_regime_source_request] Client out of range: %d Source vote on: src=%d, proc=%d, old_state=%d Source vote off: src=%d, proc=%d, new_state=%d Source request: req=%d, src=%d, client=%d, count=%d Cannot reconfigure shared PLL: %d, votes=0x%x Unsupported Regime EMDH Unsupported Regime PMDH Cannot switch adsp clk, not owned by processor! Unsupported Regime MI2S CODEC RX on this Target! Unsupported Regime MI2S CODEC TX on this Target! Unsupported Regime vdc on this Target! Unsupported Regime ecodec on this Target! Cannot switch vdc clk, owned remotely! Unsupported Regime GP clkrgm_msm.c Unsupported Regime VFE new_src: %d Unsupported Regime SDC1 speed: %d Unsupported Regime UART1 speed: %d Not the Regime Owner UART1 speed: %d Unsupported Regime SDC2 speed: %d Unsupported Regime UART2 speed: %d Not the Regime Owner UART2 speed: %d Unsupported Regime SDC3 speed: %d Unsupported Regime UART3 speed: %d Not the Regime Owner UART3 speed: %d Unsupported Regime SDC4 speed: %d Unsupported Regime UART1DM speed: %d Invalid VFE source: %d Unsupported GP source: %d Unsupported QDSP6 regime: %d Unsupported Regime vdc perf: %d Unsupported sdac cfg: %d Unsupported Regime sdac cfg: %d Unsupported sdc cfg: %d Unsupported ecodec cfg: %d Unsupported Regime ecodec cfg: %d Unsupported icodec_rx cfg: %d Unsupported Regime icodec_rx cfg: %d Unsupported icodec_tx cfg: %d Unsupported Regime icodec_tx cfg: %d Invalid GP config: %d Unsupported clk: %d freq: %d Match: %d Unsupported clk: %d freq: %d match: %d [clk_regime_msm_off] Unsupported clock: %d [clk_regime_msm_on] Unsupported clock: %d [clk_regime_msm_reset] Unsupported clock: %d [clk_regime_msm_reset_assert] Unsupported clock: %d [clk_regime_msm_reset_deassert] Unsupported clock: %d [clk_regime_msm_sel_clk_inv] Unsupported clock: %d Clock divider request for unsupported clock: %d [clk_regime_msm_is_enabled] Invalid clock: %d [clk_regime_msm_is_supported] Invalid clock: %d [clk_regime_msm_enable] Invalid clock: %d [clk_regime_msm_disable] Invalid clock: %d [clk_regime_msm_off] Invalid clock: %d [clk_regime_msm_on] Invalid clock: %d [clk_regime_msm_is_on] Invalid clock: %d [clk_regime_msm_reset] Invalid clock: %d [clk_regime_msm_on] Processor not owner of clock: %d Unsupported ADSP clk: %d Unsupported Regime MI2S CODEC RX new_clk: %d Unsupported Regime MI2S CODEC TX new_clk: %d Unsupported QDSP6 performance level: %d Unsupported Regime MDP_LCDC freq: %d Unsupported Regime Camera new_freq: %d [clk_regime_msm_get_perf_level_freq_khz] Unsupported param: %d %d Unable to find regime %d in sync list of %d NULL source for clk %d Invalid UARTDM config: regime=%d, cfg=%d Invalid UART config: clk=%d, cfg=%d Invalid UART: clk=%d Unsupported device request: device=%d, request=%d Unsupported device (%d) for set_minimum_speed Cannot switch %d clk, not supported Clock %d mux not supported /clk/msm/tcxo_div4.state /clk/msm/axi_li_imem.state Clock regime %d set to %d Hz Unable to find EMDH clock for %d KHz Unable to find PMDH clock for %d KHz Unable to run VDC at %d KHz hs_send_key Buffering Key: %d State: %d! hsi_drain_event_buffer: Sent Key: %d State: %d! hs_send_key Sent Key: %d State: %d! HS BSP init failed hs_register_poll : Invalid plugin ID (%d) was used hs snd_set_device: Headset Muted Unknown state for Headset Switch received Unknown state for Headphone Detection received Unknown state for Headset Detection received Unknown state for Accessory Detection received Unknown state for Handset Flip received HS CMD Ver Mismatch Error Polling for headset switch %s:Invalid event poll interval %s: Failed to get an APC free item hs snd_set_device: Switched to headset on headset connect hs snd_set_device:Switched to handset on headset disconnect oncrpc_main_rex.c Error Router Server Create Failed Assertion len <= sizeof( name ) failed Invalid argument to spin_lock Invalid argument to spin_unlock KxMutex_Lock failed. KxMutex init failed. diagcomm_sio.c Assertion 0 failed Assertion ptr != NULL failed Assertion diagcomm_sio_inbound_item_ptr->data_ptr != NULL failed Assertion chain_size <= DIAG_RX_RSP_MAX_CHAIN_SIZ failed Assertion chain_size < DIAG_TX_MAX_CHAIN_SIZ failed Assertion stream_len failed Assertion ptr failed Assertion count failed Could not set PMIC time Trying to set a time in past. Difference in msec =%d time_genoff.c Assertion base < ATS_MAX failed Resource %d is exclusive, used by %x (c=%d) Clock %d released (usage=%d, ext=%d) Clock %d requested (usage=%d, ext=%d) Client %d released resource %d (clients=%x) Client %d requested resource %d (clients=%x) Usage count already zero, clock=%d Invalid client/resource: c=%d, r=%d Invalid resource: r=%d Need code changes to support more than 64 clients clkrgm_msm_bridge.c Invalid bridge: %d Invalid bridge request: %d Bridge control for %d tied to clock Unable to switch fabric clock! clkrgm_fabric.c Unsupported FABRIC perf level: fabric_clk=%d Fabric clk switch: %d -> %d Hz tramp_pic_l4.c PIC hardware nesting error hs_event_buffer.c %s: hs_apc_enqueue failed: %d Poll list not configured properly smd_internal.c Call to smdi_block_close_req in bad state: %d Invalid stream state %d %d Unable to allocate channel for %d Unable to allocate FIFOs for port %d Assertion (smd_port_to_info[port_id] != NULL) && (smd_port_to_info[port_id]->protocol == SMD_BLOCK_ALLOCATION) failed Assertion (smd_port_to_info[port_id] != NULL) && (smd_port_to_info[port_id]->protocol == SMD_STREAMING_BUFFER) failed Assertion port_id < ARRAY_SIZE(smd_port_to_name) failed Assertion port_id < ARRAY_SIZE(smd_port_to_info) failed Assertion smd_channel_alloc_tbl[cid].ref_count != 0 failed Assertion smd_port_to_info[port_id] != NULL failed Assertion info != NULL failed Assertion smd_port_to_info[port_id] == NULL failed Assertion smd_port_to_info[info->port_id] == info failed %s: channel %d protocol mismatch Invalid SMD FIFO SZ: %i %s: SMD channel table is full Out of SMD channels Assertion failure: ( NULL != (pBlockSize)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\utils\src\CorePool.c:90 Assertion failure: ( *pBlockSize >= sizeof( CorePoolBlockType )) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\utils\src\CorePool.c:91 Assertion failure: ( NULL != (pElem)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\utils\src\CorePool.c:62 Assertion failure: ( NULL != (pPool)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\utils\src\CorePool.c:203 Assertion failure: ( NULL != (pData)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\utils\src\CorePool.c:143 Assertion failure: ( NULL != (pPool)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\utils\src\CorePool.c:135 Assertion failure: ( NULL != (pPool)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\utils\src\CorePool.c:195 Assertion failure: ( NULL != (pPool)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\utils\src\CorePool.c:156 Assertion failure: ( NULL != (pPool)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\utils\src\CorePool.c:166 Assertion failure: ( NULL != (pPool)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\utils\src\CorePool.c:176 Assertion failure: ( NULL != (pData)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\utils\src\CorePool.c:196 Assertion failure: ( DAL_SUCCESS == (DALSYS_Malloc(uBlockSize, &pData))) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\utils\src\CorePool.c:157 Assertion failure: ( NULL != (pConfig)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\utils\src\CorePool.c:167 Assertion failure: ( NULL != (pData)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\utils\src\CorePool.c:109 Assertion failure: ( NULL != (pPool)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\utils\src\CorePool.c:219 Assertion failure: ( DAL_SUCCESS == (DALSYS_SyncCreate(0x00000010, &pPool->hLock, 0))) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\utils\src\CorePool.c:139 Log listener 0x%04X param:0x%08X seq:%d Event listener 0x%04X param:0x%08X seq:%d Assertion SIO_MAJOR_NUM_OF_DEVICE(port_id) != SIO_MAJOR_SMD_BRIDGE_NPROC failed Assertion (sio_device_list[major_num][minor_num].driver_interface) != NULL failed Assertion open_ptr != NULL failed Assertion stream_id < SIO_MAX_STREAM failed Assertion major_num < SIO_MAX_MAJOR_NUM failed Assertion minor_num < SIO_MAX_MINOR_NUM failed Assertion driver_iface->HW_disable_device failed Assertion driver_iface->HW_close failed Assertion driver_iface->HW_control_close failed Assertion driver_iface->HW_ioctl failed Assertion driver_iface->HW_control_ioctl failed Assertion driver_iface->HW_open failed Assertion driver_iface->HW_control_open failed Assertion driver_iface->HW_transmit failed Assertion driver_iface->HW_control_transmit failed Assertion driver_iface->HW_flush_tx failed sio_open called with both RX and TX undefined ! port_id = 0x%x sio_control_open called with either RX or TX undefined ! port_id = 0x%x Invalid stream mode ! port_id = 0x%x dsmi_ref_inc: Reference count is zero. dsm: Invalid Pool ID = %d dsm: Invalid Mem Level = %d dsm: Invalid Mem Operation = %d dsm_verify_buffer: USED field is out of range: USED %d:MAX %d Assertion (unsigned int)table > 256 failed Assertion item_ptr != NULL failed Assertion table!=NULL failed dsm_verify_buffer: Bad Header Cookie dsm_verify_buffer: Bad Trailer Cookie dsm_verify_packet: Packet Linked to Self dsmi_ref_dec: Reference count already zero dsm_verify_buffer: DATA_PTR out of range: DATA_PTR 0x%x PMIC: GPIO ENABLE set to HIGH PMIC: End pm_vreg_set_level_TI_TPS62651_external_smps() call with Range ERROR PMIC: End pm_vreg_set_level_TI_TPS62651_external_smps() call with SUCCESS PMIC: GPIO ENABLE set to LOW PMIC: Start pm_vreg_control_TI_TPS62651_external_smps() call cmd = %d PMIC: Start pm_vreg_set_level_TI_TPS62651_external_smps() call level = %d, NACK status = %d PMIC: pm_DalI2C_Read() reg = %x, val = %x, result = %d PMIC: End pm_vreg_control_TI_TPS62651_external_smps() call PMIC: Before pm_set_vsel_high_operating_mode() pm_vreg_external_smps_i.c PMIC: setting VSEL low, threshokd = %d, status = %d PMIC: setting VSEL high, threshold = %d, status = %d PMIC: pm_DalI2C_Write() reg = %x, val = %x, result = %d PMIC: End pm_vreg_set_level_TI_TPS62651_external_smps() call with ERROR. Will use GPIO now PMIC: Could not set SMPS high operating mode. I2C write error: %x %s: hs_pwr_key_determination_cb - state HS_PWR_KEY_STATE_IDLE %s: hs_pwr_key_end_released state: HS_PWR_KEY_STATE_END_RELEASED_SENT %s: hs_pwr_key_determination_cb - state HS_PWR_KEY_STATE_END_RELEASED_SENT %s: hs_pwr_key_end_released state: HS_PWR_KEY_STATE_END_PRESSED_SENT %s: hs_pwr_key_determination_cb - state HS_PWR_KEY_STATE_END_PRESSED_SENT %s: hs_pwr_key_end_released state: HS_PWR_KEY_STATE_PWR_PRESSED_SENT hs_pwr_key.c %s: hs_pwr_key_event_cb received the wrong event %d %s: pm_hs_event_deregister failed %s- PWR key deterimend %s: hsi_pwr_key_init- invalid input parameters xdr_std_send_dsm: dsm_dup failed (item=%d, size=%d). Reply pointer is NULL oncrpc_xdr_std.c Invalid in_msg_type = %d xdr_std_send_int32: error in PROG %x, PROC %x, XID %d xdr_std_recv_int32: error in PROG %x, PROC %x, XID %d xdr_std_send_uint32: error in PROG %x, PROC %x, XID %d xdr_std_recv_uint32: error in PROG %x, PROC %x, XID %d xdr_std_send_int16: error in PROG %x, PROC %x, XID %d xdr_std_recv_int16: error in PROG %x, PROC %x, XID %d xdr_std_send_uint16: error in PROG %x, PROC %x, XID %d xdr_std_recv_uint16: error in PROG %x, PROC %x, XID %d xdr_std_send_int8: error in PROG %x, PROC %x, XID %d xdr_std_recv_int8: error in PROG %x, PROC %x, XID %d xdr_std_send_uint8: error in PROG %x, PROC %x, XID %d xdr_std_recv_uint8: error in PROG %x, PROC %x, XID %d xdr_std_send_dsm: error in PROG %x, PROC %x, XID %d xdr_std_recv_dsm: error in PROG %x, PROC %x, XID %d xdr_std_send_bytes: error in PROG %x, PROC %x, XID %d xdr_std_recv_bytes: error in PROG %x, PROC %x, XID %d xdr_std_msg_start: error in PROG %x, PROC %x, XID %d Assertion xdr->xport != NULL failed Assertion NULL != parent->xprivate failed Assertion NULL != parent failed unable to receive reply header xdr_std_clone: unable to malloc xdr private timer xdr_std_xdr_init: unable to malloc xdr private timer xdr_std_msg_send: out_msg_type invalid %x xdr_std_msg_send: no outgoing message in progress for %x MPM Timetick Latch error Assertion failure: ( DAL_SUCCESS == (DALSYS_SyncCreate(0x00000010, &ulogContext.gLockHandle, &ulogContext.gLock))) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\ulog\core\src\ULogCoreSmall.c:42 Assertion failure: ( 0) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\ulog\core\src\ULogCoreSmall.c:153 ULogCoreSmall.c smd_bridge_remote_cmd: unrecognized command (%d) smd_bridge_remote_cmd: no command receive function found for major id %d. Cannot find the stream id(0x%x)in client info table. smd bridge data port for 0x%x is not opened yet. smd_bridge_client.c smd_bridge_register_sio_driver: registration failed smd_bridge_client_driver_init: failed to allocate bridge alloc table smd_bridge_register_sio_driver: no registration function given Smd bridge version mismatch! Version %d does not match allprocs HAL_SBI_SSBI_V2_NOFTM OKL4_DEFAULT_CLIST OKL4_DEFAULT_VIRTPOOL OKL4_DEFAULT_PHYSPOOL MUTEX_LOG_ON_DEMAND !h 1Iy 0Aq!h 1 1Iy 0Aq1h 1 Hixa h 0Ay% !hIiAa!h 1Jy%! Warning: Trying to lock a mutex during tasklock KxMutexServer /node/bus/axi /clk/bus/axi /node/clk/global /clk/bus/pbus /clk/bus/mahb /clk/bus/day /clk/bus/adm /core/systemdrivers/clkregim/cpursrc /core/systemdrivers/clkregim/devman NumSysWorkLoops Unable to Allocate system workloops f7H g7H`g7I7J Client not ready for receives Time out while waiting for remote response Response received after Timeout DALSBI: Can't lock reserved bus! DALSBI: Unable to lock DALGlbCtxt lock! DALSBI: The requested SBI sampling delay is invalid! DALSBI: The requested SBI bus is not supported sampling_delay DALSBI: Failed to initialize global context module! DALSBI: Failed to allocate global context object! DALSBI: Failed to allocate DALGlbCtxt Sync object! DALSBI: Failed to allocate Sync object! DalSBI::GetControllerType: Parameter size doesn't match type DalSBI::GetControllerType: NULL pointer passed DalSBI::GetClientSlaveSettings: NULL pointer passed DalSBI::Read: NULL pointer passed DalSBI::Read: Buffer length is zero DalSBI::Write: Buffer length is zero DalSBI::Write: NULL pointer passed DalSBI::ReadByte: Parameter size doesn't match type SPS_O 0x%x != HAL IRQ 0x%x Event trigger failure Failed to allocate event SPS event dropped BAM 0x%x pipe %d forced to use polling IRQ from BAM 0x%x inactive pipe(s) 0x%x No local access to BAM 0x%x Failed to register BAM 0x%x IRQ %d Failed to init BAM 0x%x IRQ %d MTI destination address not specified for BAM 0x%x BAM 0x%x enabled: ver: %d, number of pipes: %d BAM 0x%x disabled NULL BAM virtual address wwwwBAM device 0x%x RESET failed: pipe %d in use Restricted from allocating pipes on BAM 0x%x Failed to allocate pipe on BAM 0x%x Invalid pipe %d for allocate on BAM 0x%x BAM 0x%x pipe %d is not local Pipe %d already allocated on BAM 0x%x Invalid BAM 0x%x pipe: %d Attempt to free unallocated pipe %d on BAM 0x%x Disconnect BAM 0x%x pipe %d with %d events pending EOT option is invalid for consumer: BAM 0x%x pipe %d opt 0x%x Queue/ack mode change after transfer: BAM 0x%x pipe %d opt 0x%x Invalid option for BAM-to-BAM: BAM 0x%x pipe %d opt 0x%x Desc cache error: BAM 0x%x pipe %d: %d BAM 0x%x pipe %d remote config is not supported FIFO buffers are not allocated for BAM 0x%x pipe %d Invalid descriptor FIFO size for BAM 0x%x pipe %d: %d wwwwInvalid pipe %d on BAM 0x%x for connect BAM 0x%x pipe %d sharing violation BAM 0x%x pipe %d init error BAM 0x%x pipe %d already disconnected Only callback events support for NO_Q: BAM 0x%x pipe %d mode %d Transfer on BAM-to-BAM: BAM 0x%x pipe %d User pointer arg non-NULL: BAM 0x%x pipe %d Free count on BAM-to-BAM or remote: BAM 0x%x pipe %d iovec count zero: BAM 0x%x pipe %d Insufficient free desc: BAM 0x%x pipe %d: %d Invalid connection for event: BAM 0x%x pipe %d context 0x%x Is empty on remote: BAM 0x%x pipe %d Cannot grant satellite control to BAM 0x%x pipe %d BAM 0x%x pipe %d not local and active Unable to obtain DAL general properties incompatible SPS DAL properties version: DAL %x CFG %x Unable to allocate heap memory Unable to retrieve heap memory info Noncached section does not exist Noncached section does not match parameters Unable to map IO memory: %x %x Unable to obtain info for IO memory: %x %x SPS virtual memory: %d mappings remain DS BAUD DIAG BAUD: "&*.26:>BFJNRVZ^bfkosw{ internal heap error: %d vs %d SPS target memory: 0x%x still allocated Heap granularity not power-of-2 heap: 0x%x Failed to allocate heap mgr struct Unable to map IO memory section: %x %x Cannot allocate heap block control array: size 0x%x *** assertion failed: !(__L4_TCR_ErrorCode()) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\services\diag\DCM\common\src\diag.c D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\api\kernel/l4/cust/msm_syscall.h !(__L4_TCR_ErrorCode()) 0123456789ABCDEF 0123456789abcde D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\api\kernel/l4/cust/msm_syscall.h !(__L4_TCR_ErrorCode()) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\dal\framework\sys\src\l4\DALSysLogEvent.c D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\buses\i2c\dal\src\common\DALI2C.c D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\api\kernel/l4/cust/msm_syscall.h !(__L4_TCR_ErrorCode()) Assertion compare_func != NULL failed Assertion q_delete_ptr != NULL failed Assertion link_ptr != NULL failed Assertion q_link_ptr != NULL failed Assertion q_ptr != NULL failed Assertion real_q_ptr != NULL failed Assertion q_insert_ptr != NULL failed Assertion buffer->flag == FLAG_PRE failed Assertion INFO_POST(buffer)->flag == FLAG_POST failed memutils.cpp Received modem restart interrupt dog_get_report_period: Invalid ID. DOG Deregister: Invalid ID. DOG IntRegister with NULL tcb. DOG IntRegister called before dog_init completed. DOG IntRegister: Table full. Dog bark timeout. Assertion index < DOG_NUM_TASKS failed Watchdog detects task starvation Watchdog startup timeout Timer 0x%x is being redefined which is not allowed. group: 0x%x list: 0x%x) Timer def called from Timer context. Assertion timers.bins_free.count > 0 failed Assertion bin != NULL failed Assertion timer_group != NULL failed Assertion timer != NULL failed Assertion timer->list != NULL failed Assertion src_list != NULL failed [timer_resume] : timer_def was not called for timer %x, task %s [timer_pause] : timer_def was not called for timer %x, task %s [timer_clr] : timer_def was not called for timer %x, task %s [timer_set] : timer_def was not called for timer %x, task %s Processing of callback fn = 0x%x took 0x%x ticks, threshold = 0x%x ticks Timer dynamic range exceeded on recurrence. %x period shortened by %x Can't set signals to NULL task. T=%x S=%x Invalid host type. smsm_target.c MSG_2 Iter %d uid %d Client MSG_HIGH Iter %d uid %d num_iter %d MSG_FATAL Iter %d uid %d num_iter %d ERR_FATAL Iter %d uid %d num_iter %d MSG_ERROR Iter %d uid %d num_iter %d ERR Iter %d uid %d num_iter %d Failed to allocate q_item for stress test. MSG_6 Iter %d uid %d num_iter %d %d %d %d MSG_5 Iter %d uid %d num_iter %d %d %d MSG_4 Iter %d uid %d num_iter %d %d MSG_1 Iter %d MSG_3 Iter %d uid %d num_iter %d Test MSG with no arg diagdiag_common.c Panic mode test %d uid %d Panic mode test %d pri %d Received rsp:0x%X num:%d Injecting req:0x%08X num:%d Injected req:0x%08X num:%d success:%d ISR fatal error time_fn_map.c ATS_RTC: Call to pm_rtc_rw_cmd failed Invalid PMIC model detected clkrgm_npa.c Assertion clnt != NULL failed Assertion idx < RPC_MAX_NUM_CALLBACKS failed Callback on protocol %d unimplemented rpc_clnt_register: task %x tried to register a NULL client rpc_clnt_deregister: task %x tried to deregister a NULL client task %x attempt to register a 2nd client RPC svc callback registry overflow RPC clnt callback registry overflow Invalid cb_data for thread %x cb_data %x already in use for this thread %x Unable to create shared memory client for task %x smd_target.c Assertion SMD_INVALID_HOST != to failed Assertion failure: ( NPA_REMOTE_SUCCESS == npa_remote_init( NPA_REMOTE_VERSION_MAJOR, NPA_REMOTE_VERSION_MINOR, NPA_REMOTE_VERSION_BUILD, NULL, NULL )) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\src\target\9x00\modemCtrl\npa_target_init.c:22 npa_target_init.c DAL_DeviceAttach Failed. sleep_target.c pmapp_vreg_vote.c PMIC ERROR pm_register_vreg_switch_callback failed to register callback - registration queue overflow Assertion header->forw_offset >= sizeof(mem_block_header_type) failed Assertion (void *)mark_ptr < (void *)((char *)heap_ptr->first_block + heap_ptr->total_bytes) failed Assertion result == 0 failed Assertion !header->last_flag || block_count == 1 failed Assertion totals->current_block_count >= 1 failed Assertion info->cookie == PMEM_COOKIE failed Assertion *mark_ptr == PMEM_DEBUG_PAD_VALUE failed Assertion h->mem_heap.used_bytes > PMEM_ALIGN_BLOCK_SIZE failed Assertion heap_ptr != NULL failed Assertion totals != NULL failed Assertion header->pad1 == MEMHEAP_PAD_CHAR failed Assertion *mark_ptr == crc failed Assertion header->free_flag == (char)kBlockFree || header->free_flag == (char)kBlockUsed failed Assertion header->extra < kMinChunkSize failed Assertion !header->free_flag failed Assertion !header->last_flag failed Assertion header->last_flag == 0 || header->last_flag == (char)kLastBlock failed Assertion header >= heap_ptr->first_block failed Assertion (void *)mark_ptr > (void *)heap_ptr->first_block failed Assertion header < end_ptr failed Assertion totals->used_bytes == heap_ptr->used_bytes failed Assertion totals->total_physical_bytes == heap_ptr->total_bytes failed Assertion totals->current_block_count <= heap_ptr->total_blocks failed PMEM: block already freed: ID %d, size %d, pointer 0x%lx Error, no available tcb rpc_router_rex.c Function is not implemented smd_sio_ioctl: no record escape function specified (sio port id %d) smd_sio_ioctl: no dtr callback function specified (sio port id %d) smd_sio_ioctl: no dtr ext callback function specified (sio port id %d) smd_sio_ioctl: no record packet function specified (sio port id %d) smd_sio_free_info: info mismatch (sio port id %d) smd_sio_handle_rawdata: illegal state (%d) smd_sio_alloc_info: Illegal sio port_id given (0x%x) registration failed with major = 0x%x. SIO_MAJOR_SMD registration failed with minor = 0x%x. smd_sio_get_cntl_port_name: unrecognized sio port id: %d smd_sio_get_port_name: unrecognized sio port id: %d Unknown stream mode %d smd_sio_get_info_location: illegal sio port id (%d) given channel type idx %d, channel idx %d smd_sio_flush_tx_ext: no flush callback function specified smd_sio_flush_tx: no flush callback function specified RPC SMD Ports not supported from smd_sio smdl_loopback.c Loopback port: smdl_write() failed clkrgm_msm_rm.c Invalid resource or clk: r=%d, clk=%d PING: Data Transfer Rate :%d B/sec PING: Num bytes transferred :%d PING: Num fwd bytes per call :%d PING: Num ret bytes per call :%d PING: Num RPC Calls completed:%d PING: %5d %5d %6d %5d %5d %6d %8d PING: Test Duration :%d ms PING: RPC Call Duration :%d us PING: Test(ms) #Calls CallTime(us) FwdBytes RetBytes TotBytes DataRate(bps) ping_mdm_common.c PING ERROR: Invalid print format oncrpc_daemon_api.c QDSP6FWSS_PUB QDSP6SWSS_PUB QDSP6FWSS_SIRC QDSP6SWSS_SIRC MPSS_AHB_MISC DAYTONA_PIPE SIC_NON_SECURE MPSS_MUTEX_REG QDSP6FW_L2TCM_CFG QDSP6SW_L2TCM_CFG MPSS_ARM9_MTI WCDMA_DEMBACK MPSS_SEC_INTCTL CHIP_PRI_INTCTL USB2_HSIC_BAM PPSS_CODE_RAM PPSS_BUF_RAM DAYTONA_PMEM QDSP6FWSS_IM QDSP6SWSS_IM MPSS_TIMERS_MICRO MPSS_TIMERS_SLP QDSP6FWSS_CSR QDSP6SWSS_CSR QDSP6FWSS_SAW QDSP6SWSS_SAW ENC_BURST_FW smd_bridge_server.c smd_bridge_receive_cmd: unrecognized command %d Assertion r != FALSE failed smd_bridge_server_connect_port: invlid smd port id Assertion rdm_cb_params.srv_requester == RDM_DATA_SRVC failed Assertion rdm_cb_params.srv_requester == RDM_DIAG_SRVC failed Assertion ds_dev != RDM_NULL_DEV failed Assertion diagcomm_dancing_assign_port_cb_params.valid failed Assertion !diagcomm_dancing_assign_port_cb_params.valid failed Assertion rdm_cb_params.dev_desired == diagcomm_dancing_state.diag_old_dev failed Assertion rdm_cb_params.dev_desired == diagcomm_dancing_state.ds_old_dev failed MUTEX_DIAG_SRCH_LIST_CS MUTEX_DIAG_SLEEP_VOTE_CS MUTEX_DIAGBUF_BUF_CS 9x00B-362421-SCAQSVZM Sleep Vote API Mutex DAL_PLATFORM_INFO PlatformInfoFusedChip PlatformInfoTypeOverride PlatformInfoVersionOverride Non aligned pmem allocation Db """"$&(*,.02468:<>@BDFHJLNPRTVXZ\^` ~}|{zyxwvutsrqponmlkjihgfedc0 RPCCALL_CNTL CONTROL_CNTL MCPY_RVD_CNTL !#%')+-/13579;=?ACEGIKMOQSUWY[]_acegjloruxiiii{} pG pG! pG" pG# pG$ pG% pG& pG' pG GPSNMEA_CNTL , Line Num: default_clk_stretch_time_usec default_clk_freq_fs default_interface Tsens could not allocate memory for device data num_sensors_supported sensors_supported_list Tsens could not create device synchronization object Device failed to get sensors_supported_list property Device failed to get num_sensors_supported property interrupt_id default_sampling_period Device failed to open Interrupt Controller Device failed to get interrupt_id property Device failed to get sampling_period property Device failed to register ISR Device failed to attach to Interrupt Controller Device failed to unregister ISR Tsens Device DeInit: Failed to detach from Int Ctrl Tsens Device DeInit: Failed to close Int Ctrl Failed to register the client - Ran out of handles! Failed to deregister the client Flash_STATS_FRAMEWORK:SyncLock Create Failed! Flash_STATS_FRAMEWORK: Unknown flash type! 82;h#`{hc`;h :CwF:`5JwFz` :CwF:`qJwFz` :CwF:`DJwFz` !(__L4_TCR_ErrorCode()) !(__L4_TCR_ErrorCode()) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\api\kernel/l4/cust/msm_syscall.h D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\api\kernel/l4/cust/msm_syscall.h !(__L4_TCR_ErrorCode()) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\api\kernel/l4/cust/msm_syscall.h !(__L4_TCR_ErrorCode()) Copyright (c) 1992,1993,1994,1995,1996,1997,1998,1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010 by QUALCOMM, Incorporated. All Rights Reserved. M9600B-SCAQSVZD-3.6.2421 npa_issue_limit_max_request (handle: 0x%08x) (client: "%s") (max: %d) (resource: "%s") (active_max: %d) npa_complete_request (handle: 0x%08x) (client: "%s") (resource: "%s") request complete (handle: 0x%08x) (sequence: 0x%08x) (request state:%d) (active state:%d) npa_destroy_client (handle: 0x%08x) (client: "%s") (resource: "%s") end npa_destroy_client (handle: 0x%08x) (client: "%s") (resource: "%s") FAILED resource %s plugin defined both create_client_fcn and create_client_ex_fcn FAILED npa_new_client "%s": resource %s does not support client type %s FAILED npa_new_client "%s": resource "%s" only supports single client and already has one(error_code: %d) FAILED npa_new_client "%s": resource "%s" failed client create (error_code: %d) npa_create_sync_client (resource: "%s") (client: "%s") (client_type: %s) end npa_create_sync_client (handle: 0x%08x) (resource: "%s") (client: "%s") (client_type: %s) FAILED npa_create_sync_client (resource: "%s") (client: "%s") (client_type: %s) created resource (resource: "%s") (handle: 0x%08x) (initial state: %d) (active state: %d) node waiting on resource (handle: 0x%08x) (node: "%s") (resource: "%s") npa_define_node (handle: 0x%08x) (node: "%s") (resource count: %d) (dependency count: %d) node resource (handle: 0x%08x) (node: "%s") (resource: "%s") (units: "%s") node dependency (handle: 0x%08x) (node: "%s") (dependency: "%s") npa_assign_resource_state (handle: 0x%08x) (resource: "%s") (active state: %d) npa_issue_required_request (handle: 0x%08x) (client: "%s") (request: %u) (resource: "%s") npa_modify_request (handle: 0x%08x) (client: "%s") (delta: %d) (resource: "%s") npa_issue_impulse_request (handle: 0x%08x)(client: "%s") (resource: "%s") npa_issue_vector_request (handle: 0x%08x)(client: "%s") (resource: "%s")(num_elems: %d ) (vector: 0x%08x) npa_issue_internal_request (handle: 0x%08x)(client: "%s") (resource: "%s") npa_cancel_request (handle: 0x%08x) (client: "%s") (resource: "%s") npa_create_async_client (resource: "%s") (client: "%s") (client_type: %s) end npa_create_async_client (handle: 0x%08x) (resource: "%s") (client: "%s") (client_type: %s) FAILED npa_create_async_client (resource: "%s") (client: "%s") (client_type: %s) npa_resources_available complete (callback: 0x%08x) (context: 0x%08x) npa_resources_available waiting on resource (resource: "%s") (callback: 0x%08x) (context: 0x%08x) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\services\diag\DCM\common\src\diagdsm.c D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\api\kernel/l4/cust/msm_syscall.h !(__L4_TCR_ErrorCode()) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\mproc\smd\smd_dsm.c D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\api\kernel/l4/cust/msm_syscall.h !(__L4_TCR_ErrorCode()) hsi_pwr_key_init hsi_pwr_key_close hs_pwr_key_end_released hs_pwr_key_determination_cb hs_pwr_key_init_pwr_end_determination hs_pwr_key_event_cb D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\mproc\oncrpc\oncrpc_pacmark.c D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\mproc\smd\smd_sio.c D:\ics_release\lte_build_folder\svlte_lte\modem_proc\modem\utils\dsmutils\src\dsmutil.c Spurious Wakeup REX Enter CS tid=%lx IPC Ctr:%ul BM Ctr:%ul Spurious Wakeup REX Wait tid=%lx IPC Ctr:%ul BM Ctr:%ul Spurious Wakeup REX Wait Ext tid=%lx IPC Ctr:%ul BM Ctr:%ul Warning: In %s task crit sect nesting level reaching limit of %d! Assertion !("L4_Set_Priority Failed.") failed Assertion !("trying to free a crit_sect which is in use.") failed Assertion !("This crit_sect was not initialized correctly.") failed Assertion !("IST tried to do rexl4_def_task_ext2") failed Assertion !("Cannot create L4 thread") failed Assertion !("Cannot create thread") failed Assertion !("Cannot Yield when TASKLOCKed") failed Assertion !("Task tried to enter crit_sect when TASKLOCKed") failed Assertion !("Task tried to do rex_wait when TASKLOCKed") failed Assertion !("Task tried to do rex_wait_ext when TASKLOCKed") failed Assertion !("Thread Create Callback Failed") failed Assertion !("REX Init Callback Failed") failed Assertion !("Thread Destroy Callback Failed") failed Assertion !("L4 Thread ID is invalid") failed Assertion !("REX TCB ptr is invalid") failed Assertion !("Stack ptr is invalid") failed Assertion !("ext received signal ptr is invalid") failed Assertion !("ext signal ptr is invalid") failed Assertion !("crit_sect ptr is invalid") failed Assertion !("invalid crit_sect in cs_stack") failed Assertion !("Could not find crit_sect in cs_stack") failed Assertion !("calling task is not holding this lock") failed Assertion !("Not LIFO order") failed Assertion !("IST tried to do rex_wait") failed Assertion !("lock count reached its limit") failed Assertion !("IST tried to do rex_wait_ext") failed Assertion !("critical section stack overflow") failed Assertion NULL != p_tcb failed Assertion NULL != task_name failed Assertion NULL != curr_task failed Assertion 0 != status failed Assertion !rex_is_in_irq_mode( ) failed Assertion FALSE failed Assertion NULL != timer_ptr failed Assertion smsm_info.num_hosts > 0 failed Assertion info->num_hosts <= SMSM_HOSTS_MAX failed Assertion owner == info->this_host failed smsm_state_get: smsm not initialized Possbile Ring buffer corrupt! Log %04X : pri %d Assertion (iHead == 0) || (iHead == DIAGBUF_SIZE) failed Assertion (diagbuf_tail == 0) || (diagbuf_tail == DIAGBUF_SIZE) failed Assertion iHeadIdx == 0 failed Assertion iHead < 2 * DIAGBUF_SIZE failed Assertion iTail < 2 * DIAGBUF_SIZE failed Assertion diagbuf_tail >= 0 && diagbuf_tail < 2 * DIAGBUF_SIZE failed Assertion diagbuf_tail < 2 * DIAGBUF_SIZE failed Assertion hole->length < DIAGBUF_SIZE failed Assertion curr_length < DIAGBUF_SIZE failed Assertion iHeadIdx < DIAGBUF_SIZE failed Assertion iTailIdx < DIAGBUF_SIZE failed Assertion buffer_used <= DIAGBUF_SIZE failed Assertion osal_thread_self () == &diag_tcb failed error fatal in diagbuf_check_overrun_pattern marker resource Sleep client already registered No space for further clients tramp_gpio.c tramp_gpio_init could not attach to tlmm: %d DALLOG Device [0x%0x] Type [%s] Log [%s] DALSysLogEvent.c oncrpc_proxy.c Invalid command type %d Assertion proxy_defer_task != NULL failed oncrpc_proxy_handle_cmd_forward_rpc_call: SEND_DSM failed oncrpc_proxy_handle_cmd_forward_rpc_call: msg_start failed oncrpc_proxy_handle_cmd_forward_rpc_call: send reply failed RPC Proxy Task Command link not available Invalid msg pointer Invalid client function pointer Invalid cmd pointer or client function pointer Out of proxy cmd buffers Unable to register client Unable to create router memory client Invalid SMD port id %d Assertion *port_to_info == NULL failed Assertion new_port_id == port_id failed Assertion *port_to_info == info failed SET_XFR_MODE not completely implemented Tried to open invalid smd watermark channel type SMD_IOCTL_ABORT not supported from smd_wm Cannot set channel xfrflow diagcomm_ctrl.c Assertion dsm_item_ptr->data_ptr != NULL failed FEATURE_DSM_POOL_TRACING is not defined. Attempt to register a mem level CB for a non-configured mem level %d Assertion item_size == 0 || meta_size == 0 failed Assertion table->cookie == DSM_POOL_MGMT_TABLE_COOKIE failed Assertion table->mem_event_cb_list[i].level == level failed Unable to find mem level in pool callback table Unable to find unused slot in pool callback table Memory pool has %d unfreed items still in use Memory pool could not be found in list of pools Assertion failure: ( NPA_REMOTE_MAGIC_QUERY == handle->magic) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\remote\npa_remote.c:800 Assertion failure: ( NULL != (local_client = npa_remote_retrieve_client( remote_client ))) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\remote\npa_remote.c:610 Assertion failure: ( 1 == npa_remote_state.init) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\remote\npa_remote.c:810 Assertion failure: ( NPA_REMOTE_MAGIC_EVENT == handle->magic) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\remote\npa_remote.c:640 Assertion failure: ( NPA_QUERY_SUCCESS == npa_query_by_client( local_client, NPA_QUERY_CURRENT_STATE, &result )) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\remote\npa_remote.c:560 Assertion failure: ( NULL != (resource_name)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\remote\npa_remote.c:811 Assertion failure: ( NPA_QUERY_SUCCESS == npa_query_by_client( local_client, NPA_QUERY_CURRENT_STATE, &result )) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\remote\npa_remote.c:541 Assertion failure: ( length <= NPA_REMOTE_MAX_STR_LEN) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\remote\npa_remote.c:661 Assertion failure: ( NULL != (handle)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\remote\npa_remote.c:771 Assertion failure: ( 1 == npa_remote_state.init) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\remote\npa_remote.c:691 Assertion failure: ( NULL != (local_client = npa_remote_retrieve_client( remote_client ))) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\remote\npa_remote.c:522 Assertion failure: ( ASYNC_CLIENT == synchronous_client) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\remote\npa_remote.c:452 Assertion failure: ( NPA_REMOTE_MAGIC_EVENT == handle->magic) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\remote\npa_remote.c:772 Assertion failure: ( NULL != (resource_name)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\remote\npa_remote.c:692 Assertion failure: ( NULL != (handle->callback = npa_remote_new_callback( remote_callback, remote_context, npa_remote_event_cb, 0, 0 ))) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\remote\npa_remote.c:703 Assertion failure: ( NPA_QUERY_SUCCESS == npa_query_by_client( local_client, NPA_QUERY_CURRENT_STATE, &result )) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\remote\npa_remote.c:613 Assertion failure: ( NULL != (context)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\remote\npa_remote.c:233 Assertion failure: ( NULL != (client_name)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\remote\npa_remote.c:433 Assertion failure: ( NULL != (cb_context = npa_remote_new_callback( remote_callback, remote_context, npa_remote_resource_check_cb, npa_remote_free_name_cb, local_name))) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\remote\npa_remote.c:343 Assertion failure: ( NULL != (handle)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\remote\npa_remote.c:373 Assertion failure: ( DAL_SUCCESS == (DALSYS_EventCreate( 0x00000020, &context->dal_event, &context->dal_event_obj ))) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\remote\npa_remote.c:283 Assertion failure: ( NULL != (local_client = npa_remote_retrieve_client( remote_client ))) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\remote\npa_remote.c:593 Assertion failure: ( NULL != (event_name)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\remote\npa_remote.c:693 Assertion failure: ( handle->name == remote_client_name) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\remote\npa_remote.c:214 Assertion failure: ( NPA_QUERY_SUCCESS == npa_query_by_client( local_client, NPA_QUERY_CURRENT_STATE, &result )) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\remote\npa_remote.c:524 Assertion failure: ( length <= NPA_REMOTE_MAX_STR_LEN) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\remote\npa_remote.c:334 Assertion failure: ( NULL != (cb_context = npa_remote_new_callback( remote_callback, remote_context, npa_remote_async_client_cb, 0, remote_client_handle ))) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\remote\npa_remote.c:454 Assertion failure: ( NPA_REMOTE_MAGIC_CLIENT == handle->magic) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\remote\npa_remote.c:374 Assertion failure: ( 1 == npa_remote_state.init) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\remote\npa_remote.c:425 Assertion failure: ( NULL != (context = Core_PoolAlloc( &npa_remote_state.callback_pool ))) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\remote\npa_remote.c:275 Assertion failure: ( NULL != (context)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\remote\npa_remote.c:185 Assertion failure: ( NPA_QUERY_SUCCESS == npa_query_by_client( local_client, NPA_QUERY_CURRENT_STATE, &result )) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\remote\npa_remote.c:595 Assertion failure: ( NULL != (resource_name)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\remote\npa_remote.c:426 Assertion failure: ( 1 == npa_remote_state.init) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\remote\npa_remote.c:336 Assertion failure: ( NULL != (local_client = npa_remote_retrieve_client( remote_client ))) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\remote\npa_remote.c:576 Assertion failure: ( DAL_SUCCESS == (DALSYS_DestroyObject( context->dal_event ))) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\remote\npa_remote.c:186 Assertion failure: ( DAL_SUCCESS == (DALSYS_SetupCallbackEvent( context->dal_event, npa_remote_dal_callback, context ))) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\remote\npa_remote.c:286 Assertion failure: ( NULL != (local_client = npa_remote_retrieve_client( remote_client ))) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\remote\npa_remote.c:396 Assertion failure: ( NULL != (event = npa_remote_retrieve_event( remote_handle ))) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\remote\npa_remote.c:907 Assertion failure: ( NULL != (resource_name)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\remote\npa_remote.c:337 Assertion failure: ( NPA_QUERY_SUCCESS == npa_query_by_client( local_client, NPA_QUERY_CURRENT_STATE, &result )) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\remote\npa_remote.c:397 Assertion failure: ( NULL != (local_client = npa_remote_retrieve_client( remote_client ))) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\remote\npa_remote.c:558 Assertion failure: ( NPA_QUERY_SUCCESS == npa_query_by_client( local_client, NPA_QUERY_CURRENT_STATE, &result )) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\remote\npa_remote.c:578 Assertion failure: ( 0) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\remote\npa_remote.c:209 Assertion failure: ( WATERMARK_EVENT == event_type) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\remote\npa_remote.c:719 Assertion failure: ( NULL != (local_name = Core_PoolAlloc( &npa_remote_state.callback_pool ))) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\remote\npa_remote.c:339 Assertion failure: ( NULL != (local_client = npa_remote_retrieve_client( remote_client ))) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\remote\npa_remote.c:539 Assertion failure: ( NULL != (handle)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\remote\npa_remote.c:639 Assertion failure: ( NULL != (handle = npa_remote_retrieve_client( remote_handle ))) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\remote\npa_remote.c:889 Assertion failure: ( NULL != (handle)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\npa\remote\npa_remote.c:799 npa_remote.c Remote Client 32KHz sleep xtal failure siors232_mdd_data.c Assertion mdd_port->gv.sio_escape_code_func_ptr != NULL failed Assertion pkt_len < item_ptr->size failed Invalid Callback Invocation !(__L4_TCR_ErrorCode()) !(__L4_TCR_ErrorCode()) ExIPC: Failed L4_Wait tag=%lx tid=%lx ExIPC: DivideByZero @ %lx, tid=%lx ExIPC: <SWI 0x%lx> @ %lx, tid=%lx ExIPC: Undef-Inst %lx @ %lx, tid=%lx ExIPC: Mis-aligned %lx @ %lx, tid=%lx ExIPC: Execute Fault @ %lx, tid=%lx ExIPC: Page Fault %lx @ %lx, tid=%lx ExIPC: Unknown %lx @ %lx, tid=%lx ExIPC: Unknown IPC tag=%lx tid=%lx Exception detected Dog Report Information (dog_state_table) [idx] Task Name Pri Timeout Count Is_Blocked [%3d] %11s %4d %6d %6d %1d End Dog Report NPA_CLIENT_RESERVED2 NPA_CLIENT_CUSTOM3 NPA_CLIENT_LIMIT_MAX NPA_CLIENT_RESERVED1 NPA_CLIENT_CUSTOM1 NPA_CLIENT_CUSTOM2 NPA_CLIENT_CUSTOM4 NPA_CLIENT_REQUIRED NPA_CLIENT_ISOCHRONOUS NPA_CLIENT_IMPULSE unknown client type npa_destroy_event_handle (event: "%s") (resource: "%s") bhB`hh `a`hh FAILED resource "%s" already exists.Defined by node %s FAILED npa_new_client "%s": resource "%s" does not exist FAILED npa_new_event "%s": resource "%s" does not exist Can't create event "%s" against marker resource "%s" npa_create_node (handle: 0x%08x) (node: "%s") end npa_create_node (handle: 0x%08x) (node: "%s") end npa_alias_resource (resource: "%s") (alias: "%s") FAILED npa_define_node definition is NULL FAILED npa_define_node initial state vector is NULL FAILED npa_define_node "%s" has no resourcees FAILED resource %s already defined FAILED npa_alias_resource resource_name is NULL FAILED npa_alias_resource alias name is NULL npa_alias_resource (resource: "%s") (alias: "%s") npa_create_change_event (resource: "%s") (event: "%s") npa_create_watermark_event (resource: "%s") {event: "%s") NPA Dump Log OUT OF MEMORY !j(/j6ADYckjjrjjjjjjjjjjjjjxj SMDL_CTRL_%d_%d Could not configure SPI clock to match slave device spec ;SPI Data mover open call failed Spurious input interrupt occurred while core was in Reset state SPI Core encountered error spi hTlmm NULL gpio_sig_spi_clk gpio_sig_spi_cs spi fail to get clk gpio number No GPIO assigned for spi cs gpio_sig_spi_mosi gpio_sig_spi_miso spi fail to get mosi gpio number spi fail to get miso gpio number spi ConfigGPIO fail to get property handle spi ConfigGPIO fail on clkSig spi ConfigGPIO fail on csSig spi ConfigGPIO fail on mosiSig spi ConfigGPIO fail on misoSig Device failed to attach to Interrupt Controller Device failed to open Interrupt Controller interrupt_id_spi_input interrupt_id_spi_output interrupt_id_spi_error use_multiproc_sync use_NPA_max_clk_req spi fail to get input interrupt id spi fail to get output interrupt id spi fail to get error interrupt id spi fail to get Dal env property spi fail to get Global property handle spi fail to get property handle spi fail to create workloop Error creating start workloop event unable to add event workloop SPS system mem: 0x%x used, 0x%x remains SPS attempt to enqueue a queued element Invalid SPS pool Failed to allocate min objects for pool deallocated pool 0x%x is not free: %d elements, %d free SPS %s pool: %d elements, %d free ... ... 0x%x memory Failed to init BAM event pool Pool not free: connections %d Unaccounted connection freed Failed to free: 0x%x Failed to find matching heap: 0x%x Failed to alloc noncached memory section: %x bytes Failed to init heap for IO memory section: %x %x %x Unable to map IO memory section: %x %x SPS memory debug: I/O memory Failed to free noncached memory section: %x bytes SPS memory debug: memory pools SPS memory debug: system memory SPS memory debug: virtual memory SPS memory debug: exiting with memory still allocated Unable to access system memory Unable to allocate driver memory struct Failed to initialize the global memory pools SUMMARY_INTR_ID PROXY_INTERRUPTS PROXY_INTERRUPTS_SIZE GPIO Interrupt Controller: summary intr id is corrupt GPIO Interrupt Controller: Target Data is corrupt REMOTE_MODULE_ID GPIO Interrupt Controller: This GPIO is invalid GPIO Interrupt Controller: This GPIO is already assigned isr already assigned=0x%x device->gpioint_cntrl.state[].is_proxy=0x%x GPIO Interrupt Controller: : invalid GPIO GPIO Interrupt Controller: invalid GPIO /clk/bus/pbus Flash: Failed to open DMOV! Flash: DMOV Transfer failed! Flash: Error in getting dm configs from properties! Flash: Error attaching to DMOV device driver! Flash: Failed to create the DM done event object! Flash: Failed to set DMOV channel operation mode! FixedMemCachePolicy FixedMemLength FLASH HAL v1.0.0 Component Services 1.5.0.14 (srvr=qctp406;br=rel_1.5;cl=858293) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\services\utils\src\memutils.cpp D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\api\kernel/l4/cust/msm_syscall.h !(__L4_TCR_ErrorCode()) cD:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\services\diag\DCM\common\src\diagcomm_ctrl.c NumSysWorkLoops remote_server_cfg_ptr remote_client_cfg_ptr interrupt_id req_pool_size DEV_GP_DMA_M CHAN_GP_DMA_M DEV_GP_DMA_A CHAN_GP_DMA_A CHAN_CE_IN_M DEV_CE_OUT_M CHAN_CE_OUT_M CHAN_CE_IN_A DEV_CE_OUT_A CHAN_CE_OUT_A CHAN_NANDC_M CHAN_NANDC_A DEV_HS_UART_TX CHAN_HS_UART_TX DEV_HS_UART_RX CHAN_HS_UART_RX CHAN_SPI1_TX CHAN_SPI1_RX CHAN_SPI2_TX CHAN_SPI2_RX DEV_MGP_DMA0 CHAN_MGP_DMA0 DEV_MGP_DMA1 CHAN_MGP_DMA1 CHAN_MDSPSVC DEV_GPS_SRCH CHAN_GPS_SRCH BASE_GPS_SRCH NUM_PHYSICAL_DEVICES PHYSICAL_DEVICES DEVICE_QUEUE_SIZES USB_CURR_SNS XO_THERM_GPS num_sensors_supported sensors_supported_list default_sampling_period std_gpio_config_arr use_pic_i2c_interrupt_bit use_multiproc_sync interrupt_id_spi_input interrupt_id_spi_output interrupt_id_spi_error gpio_sig_spi_clk gpio_sig_spi_cs gpio_sig_spi_mosi gpio_sig_spi_miso dmov_device_spi dmov_pri_spi dmov_chan_spi_rx dmov_chan_spi_tx dmov_crci_spi_rx dmov_crci_spi_tx dmov_dal_dev FPGA_HAS_LED_DBG DUAL_DEBUG_PORT FPGA_CLK_DELAY FPGA_LED_HDR FPGA_LED_BITSHIFT HWIO_HAPPY_LED_ADDR FPGA_VERSION MAX_PLATFORMS SDIO_BOOT_EN UART_BOOT_EN UIM1_PMIC_EN FPGA_PLATFORM FPGA_PLATFORM_CNTR FPGA_PLATFORM_CODES FPGA_PLATFORM_MAP PlatformInfoTypeOverride PlatformInfoFusedChip SUMMARY_INTR_ID REMOTE_MODULE_ID PROXY_INTERRUPTS PROXY_INTERRUPTS_SIZE multiproc_sync tod_multiproc_sync wince_bootloader export_time_remote_atom oncrpc_server_cleanup_support tod_sync_pmic_rtc time_tod_as_rtc_offset use_pmic_rtc time_dem_sync use_timer_task use_os_memory_protection timer_trace_enabled timer_requires_odd_write timetick_int_edge_triggerred define_active_timer build_boot_chain no_tai_wrapper time_umts_target power_collapse D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\mproc\oncrpc\oncrpc_xdr_std.c DALSBI: The requested SBI bus conflicts with another SBI bus that has already been configured! DALSBI: Mismatch detected in the global context version -- drivers on modem and apps don't match! DALSBI: Attempt to open a SBI bus that failed to properly initialize! DalSBI::SetClientSlaveSettings: Parameter size doesn't match type DalSBI::SetClientSlaveSettings: NULL pointer passedBuffer length is zero DALSBI: Bus re-configuration not allowed for multiproc shared buses DalSBI::GetClientSlaveSettings: Parameter size doesn't match type DalSBI::Read: Address buffer length doesn't match data buffer length DalSBI::Write: Address buffer length doesn't match data buffer length Spurious output interrupt occurred while core was in Reset state Stack allocating failure : tmc. Undefined symbol boot_cache_mmu_init (referred from boot_function_table.o). cache_mmu_l4.c L4 cache_mmu_rewrite_bytecode %d L4 mmu_clean_and_invalidate_data_cache L4 L4_MSM_CACHE_FLUSH_D = mmu_invalidate_data_cache L4 mmu_invalidate_instruction_cache L4 cache_mmu_re_enable L4 cache_mmu_disable Could not create memory barrier section L4 mmu_clean_and_invalidate_data_cache_lines L4 mmu_invalidate_data_cache_lines Assertion NULL != rex_self_tcb failed Assertion NULL != rextp_log_list failed smem_log_read internal error: read_count (%d) > smem_num_entries (%d) Bad pointer from smem_alloc. System clock detection failed! BSP init failed! Source init failed! Mutex init failed! Unable to switch global clock! Unable to switch mcpu clock! IRAM code size exceeded. clkrgm_mpss.c Unexpected devman call: dev=%d, req=%d, param=%d Mutex init failed Failed to release SSBI Lock Failed to acquire SSBI lock Global clk switch: %d -> %d Hz MARM clk switch: MARM %d -> %d Hz Assertion sizeof(log_header_type) == sizeof(log_hdr_type) failed Assertion LOG_EQUIP_ID_LAST <= LOG_EQUIP_ID_MAX failed Assertion equip_id <= LOG_EQUIP_ID_MAX failed Failed to switch MDDI (Q6FW)! Failed to switch MPLL (Q6SW)! Failed to switch MSMC1! Failed to switch MSMC2! Unable to get MDDI (Q6FW) voltage! Unable to get MPLL (Q6SW) voltage! Unable to get MSMC1 voltage! Unable to get MSMC2 voltage! Voltage regulator %d set to %d mV (from %d mV) clkrgm_mpss_msmc.c Failed to acquire SSBI lock: reg=%d, level=%d Failed to set voltage regulator %d: level=%d, err=%d rpc_handle_cmd_event: RPC_DESTROY with NULL XDR oncrpc_main.c Attempt to use task local storage while not initialized RPC Task Command link not available rpc_handle_cmd_event: RPC_XDR cmd with null function Task local storage out of resources Failed to allocate %d bytes from ONCRPC oncrpc_rex.c Got unknown discriminator value: %d XDR operation failed. xdr = %d, XDR OP NUMBER = %d Error on server side, clnt = %d, error status = %d RPC call rejected, clnt = %d, reject status = %d Failed to lookup RPC client. prog = %d, vers = %d, tout = %d Failed to send RPC message. xdr = %d, reply = %d Assertion NULL != ptr failed Interrupt level RPC Call Task locked at RPC Call Failed to create RPC app Failed to register RPC app Failed to lookup cb data on the server Expecting signal RPC_SYNC_SIG got signal %x Failed to allocate critical section memory Failed to allocate timer memory Assertion table_iter != NULL failed Unable to allocate shared memory sclk_common.c Couldn't allocate shared sclk_common_data structure DAL Device failed to attach!!! FAILED TO COMM WITH PMIC PMIC Config error : %d rpc_clnt_lookup2() returned NULL! oncrpc_lookup_dest() returned NULL! oncrpc_lookup.c Exit Callback Database corruption Unable to create timer INVALID COMMAND on the queue INVALID REMOTE FREE COMMAND Could not allocate Block port SMEM bad state during a close: %d ssmd_handle_block_close called while in state: %d rpc_router_xal_smd_rx_cb: failed to lock mutex. rpc_router_xal_smd_tx_cb: bailing out, returning null pointer rpc_router_xal_smd_rx_cb: invalid port number: %x rpc_router_xal_smd.c Assertion failure: ( NULL != (h)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\utils\src\CoreEventNotification.c:342 Assertion failure: ( NULL != (pe)) D:\ics_release\lte_build_folder\svlte_lte\modem_proc\core\power\utils\src\CoreEventNotification.c:158 CoreEventNotification.c 115,200 19,200 230,400 38,400 921,600 57,600 9,600 460,800 diag baud menu init failure ds baud menu init failure :Excep :No SWI :Undef :MisAlgn :PFault :XFault :DivBy0 MT29F4G16ABC MT29F4G08ABC MT29F2G16ABD MT29F2G08ABD KFM1GN6Q2D-VEB8 KFW4G16Q2M-DEB8 KFN4G16Q2M-DEB8 KFH2G16Q2M-DEB6 KFH2G16Q2M-MUX VS920Z_V7_15, 362421, Jun 18 2012, 15:28:10 AMSS_SDIO1_BASE AMSS_SDIO1_BAM_BASE AMSS_SDIO2_BASE AMSS_SDIO2_BAM_BASE AMSS_SDC1_BASE AMSS_SDC1_DML_BASE AMSS_SDC1_BAM_BASE AMSS_SDC2_BASE AMSS_SDC2_DML_BASE AMSS_SDC2_BAM_BASE AMSS_SDC3_BASE AMSS_SDC3_DML_BASE AMSS_SDC3_BAM_BASE AMSS_SDC4_BASE AMSS_SDC4_DML_BASE AMSS_SDC4_BAM_BASE AMSS_SDC5_BASE AMSS_SDC5_DML_BASE AMSS_SDC5_BAM_BASE AMSS_USB1_HS_BASE AMSS_USB1_HS_BAM_BASE AMSS_USB2_HSIC_BASE AMSS_USB2_HSIC_BAM_BASE AMSS_PPSS_BASE AMSS_SIC_BASE AMSS_INTCTL0_BASE AMSS_INTCTL1_BASE AMSS_INTCTL2_BASE AMSS_INTCTL3_BASE AMSS_INTCTL4_BASE AMSS_INTCTL5_BASE AMSS_INTCTL6_BASE AMSS_INTCTL7_BASE AMSS_SIC_NON_SECURE_BASE AMSS_A2_BAM_BASE AMSS_EBI2CS2_BASE AMSS_FPB2_BASE AMSS_EBI2CR_BASE AMSS_EBI2XM_BASE AMSS_EBI2ND_BASE AMSS_FPB1_BASE AMSS_SPI1_BASE AMSS_SPI2_BASE AMSS_BPM_BASE AMSS_RPU_BASE AMSS_TG_BASE AMSS_SEC_CTRL_BASE AMSS_HSDDRX_BASE AMSS_TSIF_BASE AMSS_UART1DM_BASE AMSS_CRYPTO3_BASE AMSS_GNSS_ADC_BASE AMSS_FPB3_BASE AMSS_UART3_BASE AMSS_UART2_BASE AMSS_CLK_CTL_BASE AMSS_CLK_CTL_SH1_BASE AMSS_CLK_CTL_SH2_BASE AMSS_CLK_CTL_SH3_BASE AMSS_A9_MPM_BASE AMSS_MPSS_TIMERS_MICRO_BASE AMSS_MPSS_TIMERS_SLP_BASE AMSS_SSBI2_BASE AMSS_MPSS_MUTEX_REG_BASE AMSS_TLMMGPIO1_BASE AMSS_TLMMGPIO1SH_BASE AMSS_PERPH_WEB_BASE AMSS_DFAB_BASE AMSS_TOP_FABRIC_BASE AMSS_TCSR_BASE AMSS_ADMH00_BASE AMSS_ADMH01_BASE AMSS_ADMH02_BASE AMSS_ADMH03_BASE AMSS_DAYTONA_PMEM_BASE AMSS_CWBC_BASE AMSS_MPSSREGS_BASE AMSS_CHIP_PRI_INTCTL_BASE AMSS_MPSS_SEC_INTCTL_BASE AMSS_MPSS_AHB_MISC_BASE AMSS_MPSS_ARM9_MTI_BASE AMSS_QDSP6SWSS_PUB_BASE AMSS_QDSP6SWSS_CSR_BASE AMSS_QDSP6SWSS_SIRC_BASE AMSS_QDSP6SWSS_IM_BASE AMSS_QDSP6SWSS_SAW_BASE AMSS_QDSP6SW_L2TCM_CFG_BASE AMSS_QDSP6FWSS_PUB_BASE AMSS_QDSP6FWSS_CSR_BASE AMSS_QDSP6FWSS_SIRC_BASE AMSS_QDSP6FWSS_IM_BASE AMSS_QDSP6FWSS_SAW_BASE AMSS_QDSP6FW_L2TCM_CFG_BASE AMSS_MODEM_BASE AMSS_SPARE_BASE AMSS_GPS_GACC_BASE AMSS_MDSPMEM_BASE AMSS_NAV_BASE AMSS_NAV_DM_BASE AMSS_A2_BASE AMSS_DECODER_BASE AMSS_AHB2AHB_BASE AMSS_EVP_BASE AMSS_O_DEINT_BASE AMSS_CRA_BASE AMSS_O_RX_FE_BASE AMSS_PEI_BASE AMSS_O_TX_BASE AMSS_O_STMR_BASE AMSS_MEM_POOL_BASE AMSS_TC_BASE AMSS_ENC_BURST_FW_BASE AMSS_TQ_ARRAY_BASE AMSS_NTC_BASE AMSS_GEN2AXI_NX1_BASE AMSS_GEN2AXI_NX2_BASE AMSS_WCDMA_DEMBACK_BASE AMSS_TX_BASE AMSS_TXDAC_STMR_BASE AMSS_RFD_BASE AMSS_TXR0_BASE AMSS_TXR1_BASE AMSS_DEMOD_1X_BASE AMSS_HDEM_BASE AMSS_CDMA_EQU_BASE AMSS_QLIC_BASE AMSS_XMEMC_BASE AMSS_DAYTONA_PIPE_BASE AMSS_IRAM_BASE AMSS_PPSS_CODE_RAM_BASE AMSS_PPSS_BUF_RAM_BASE OKL4_DEFAULT_VIRTPOOL OKL4_DEFAULT_PHYSPOOL VIRTUAL_HWIO PHYSICAL_HWIO SCAQSVZM.RELOC HWIO_VIRT_POOL HWIO_VIRT_POOL_PD_EXT HWIO_PHYS_POOL HWIO_PHYS_POOL_PD_EXT AMSS_SDIO1_BASE AMSS_SDIO1_BAM_BASE AMSS_SDIO2_BASE AMSS_SDIO2_BAM_BASE AMSS_SDC1_BASE AMSS_SDC1_DML_BASE AMSS_SDC1_BAM_BASE AMSS_SDC2_BASE AMSS_SDC2_DML_BASE AMSS_SDC2_BAM_BASE AMSS_SDC3_BASE AMSS_SDC3_DML_BASE AMSS_SDC3_BAM_BASE AMSS_SDC4_BASE AMSS_SDC4_DML_BASE AMSS_SDC4_BAM_BASE AMSS_SDC5_BASE AMSS_SDC5_DML_BASE AMSS_SDC5_BAM_BASE AMSS_USB1_HS_BASE AMSS_USB1_HS_BAM_BASE AMSS_USB2_HSIC_BASE AMSS_USB2_HSIC_BAM_BASE AMSS_PPSS_BASE AMSS_SIC_BASE AMSS_INTCTL0_BASE AMSS_INTCTL1_BASE AMSS_INTCTL2_BASE AMSS_INTCTL3_BASE AMSS_INTCTL4_BASE AMSS_INTCTL5_BASE AMSS_INTCTL6_BASE AMSS_INTCTL7_BASE AMSS_SIC_NON_SECURE_BASE AMSS_A2_BAM_BASE AMSS_EBI2CS2_BASE AMSS_FPB2_BASE AMSS_EBI2CR_BASE AMSS_EBI2XM_BASE AMSS_EBI2ND_BASE AMSS_FPB1_BASE AMSS_SPI1_BASE AMSS_SPI2_BASE AMSS_BPM_BASE AMSS_RPU_BASE AMSS_TG_BASE AMSS_SEC_CTRL_BASE AMSS_HSDDRX_BASE AMSS_TSIF_BASE AMSS_UART1DM_BASE AMSS_CRYPTO3_BASE AMSS_GNSS_ADC_BASE AMSS_FPB3_BASE AMSS_UART3_BASE AMSS_UART2_BASE AMSS_CLK_CTL_BASE AMSS_CLK_CTL_SH1_BASE AMSS_CLK_CTL_SH2_BASE AMSS_CLK_CTL_SH3_BASE AMSS_A9_MPM_BASE AMSS_MPSS_TIMERS_MICRO_BASE AMSS_MPSS_TIMERS_SLP_BASE AMSS_SSBI2_BASE AMSS_MPSS_MUTEX_REG_BASE AMSS_TLMMGPIO1_BASE AMSS_TLMMGPIO1SH_BASE AMSS_PERPH_WEB_BASE AMSS_DFAB_BASE AMSS_TOP_FABRIC_BASE AMSS_TCSR_BASE AMSS_ADMH00_BASE AMSS_ADMH01_BASE AMSS_ADMH02_BASE AMSS_ADMH03_BASE AMSS_DAYTONA_PMEM_BASE AMSS_CWBC_BASE AMSS_MPSSREGS_BASE AMSS_CHIP_PRI_INTCTL_BASE AMSS_MPSS_SEC_INTCTL_BASE AMSS_MPSS_AHB_MISC_BASE AMSS_MPSS_ARM9_MTI_BASE AMSS_QDSP6SWSS_PUB_BASE AMSS_QDSP6SWSS_CSR_BASE AMSS_QDSP6SWSS_SIRC_BASE AMSS_QDSP6SWSS_IM_BASE AMSS_QDSP6SWSS_SAW_BASE AMSS_QDSP6SW_L2TCM_CFG_BASE AMSS_QDSP6FWSS_PUB_BASE AMSS_QDSP6FWSS_CSR_BASE AMSS_QDSP6FWSS_SIRC_BASE AMSS_QDSP6FWSS_IM_BASE AMSS_QDSP6FWSS_SAW_BASE AMSS_QDSP6FW_L2TCM_CFG_BASE AMSS_MODEM_BASE AMSS_SPARE_BASE AMSS_GPS_GACC_BASE AMSS_MDSPMEM_BASE AMSS_NAV_BASE AMSS_NAV_DM_BASE AMSS_A2_BASE AMSS_DECODER_BASE AMSS_AHB2AHB_BASE AMSS_EVP_BASE AMSS_O_DEINT_BASE AMSS_CRA_BASE AMSS_O_RX_FE_BASE AMSS_PEI_BASE AMSS_O_TX_BASE AMSS_O_STMR_BASE AMSS_MEM_POOL_BASE AMSS_TC_BASE AMSS_ENC_BURST_FW_BASE AMSS_TQ_ARRAY_BASE AMSS_NTC_BASE AMSS_GEN2AXI_NX1_BASE AMSS_GEN2AXI_NX2_BASE AMSS_WCDMA_DEMBACK_BASE AMSS_TX_BASE AMSS_TXDAC_STMR_BASE AMSS_RFD_BASE AMSS_TXR0_BASE AMSS_TXR1_BASE AMSS_DEMOD_1X_BASE AMSS_HDEM_BASE AMSS_CDMA_EQU_BASE AMSS_QLIC_BASE AMSS_XMEMC_BASE AMSS_DAYTONA_PIPE_BASE AMSS_IRAM_BASE AMSS_PPSS_CODE_RAM_BASE AMSS_PPSS_BUF_RAM_BASE __OKL4_CALLBACK_BUFFER OKL4_DEFAULT_VIRTPOOL OKL4_DEFAULT_PHYSPOOL VIRTUAL_HWIO PHYSICAL_HWIO SCAQSVZM.RELOC u0_a94@android:/ $
Optional Paste Settings
Category:
None
Cryptocurrency
Cybersecurity
Fixit
Food
Gaming
Haiku
Help
History
Housing
Jokes
Legal
Money
Movies
Music
Pets
Photo
Science
Software
Source Code
Spirit
Sports
Travel
TV
Writing
Tags:
Syntax Highlighting:
None
Bash
C
C#
C++
CSS
HTML
JSON
Java
JavaScript
Lua
Markdown (PRO members only)
Objective C
PHP
Perl
Python
Ruby
Swift
4CS
6502 ACME Cross Assembler
6502 Kick Assembler
6502 TASM/64TASS
ABAP
AIMMS
ALGOL 68
APT Sources
ARM
ASM (NASM)
ASP
ActionScript
ActionScript 3
Ada
Apache Log
AppleScript
Arduino
Asymptote
AutoIt
Autohotkey
Avisynth
Awk
BASCOM AVR
BNF
BOO
Bash
Basic4GL
Batch
BibTeX
Blitz Basic
Blitz3D
BlitzMax
BrainFuck
C
C (WinAPI)
C Intermediate Language
C for Macs
C#
C++
C++ (WinAPI)
C++ (with Qt extensions)
C: Loadrunner
CAD DCL
CAD Lisp
CFDG
CMake
COBOL
CSS
Ceylon
ChaiScript
Chapel
Clojure
Clone C
Clone C++
CoffeeScript
ColdFusion
Cuesheet
D
DCL
DCPU-16
DCS
DIV
DOT
Dart
Delphi
Delphi Prism (Oxygene)
Diff
E
ECMAScript
EPC
Easytrieve
Eiffel
Email
Erlang
Euphoria
F#
FO Language
Falcon
Filemaker
Formula One
Fortran
FreeBasic
FreeSWITCH
GAMBAS
GDB
GDScript
Game Maker
Genero
Genie
GetText
Go
Godot GLSL
Groovy
GwBasic
HQ9 Plus
HTML
HTML 5
Haskell
Haxe
HicEst
IDL
INI file
INTERCAL
IO
ISPF Panel Definition
Icon
Inno Script
J
JCL
JSON
Java
Java 5
JavaScript
Julia
KSP (Kontakt Script)
KiXtart
Kotlin
LDIF
LLVM
LOL Code
LScript
Latex
Liberty BASIC
Linden Scripting
Lisp
Loco Basic
Logtalk
Lotus Formulas
Lotus Script
Lua
M68000 Assembler
MIX Assembler
MK-61/52
MPASM
MXML
MagikSF
Make
MapBasic
Markdown (PRO members only)
MatLab
Mercury
MetaPost
Modula 2
Modula 3
Motorola 68000 HiSoft Dev
MySQL
Nagios
NetRexx
Nginx
Nim
NullSoft Installer
OCaml
OCaml Brief
Oberon 2
Objeck Programming Langua
Objective C
Octave
Open Object Rexx
OpenBSD PACKET FILTER
OpenGL Shading
Openoffice BASIC
Oracle 11
Oracle 8
Oz
PARI/GP
PCRE
PHP
PHP Brief
PL/I
PL/SQL
POV-Ray
ParaSail
Pascal
Pawn
Per
Perl
Perl 6
Phix
Pic 16
Pike
Pixel Bender
PostScript
PostgreSQL
PowerBuilder
PowerShell
ProFTPd
Progress
Prolog
Properties
ProvideX
Puppet
PureBasic
PyCon
Python
Python for S60
QBasic
QML
R
RBScript
REBOL
REG
RPM Spec
Racket
Rails
Rexx
Robots
Roff Manpage
Ruby
Ruby Gnuplot
Rust
SAS
SCL
SPARK
SPARQL
SQF
SQL
SSH Config
Scala
Scheme
Scilab
SdlBasic
Smalltalk
Smarty
StandardML
StoneScript
SuperCollider
Swift
SystemVerilog
T-SQL
TCL
TeXgraph
Tera Term
TypeScript
TypoScript
UPC
Unicon
UnrealScript
Urbi
VB.NET
VBScript
VHDL
VIM
Vala
Vedit
VeriLog
Visual Pro Log
VisualBasic
VisualFoxPro
WHOIS
WhiteSpace
Winbatch
XBasic
XML
XPP
Xojo
Xorg Config
YAML
YARA
Z80 Assembler
ZXBasic
autoconf
jQuery
mIRC
newLISP
q/kdb+
thinBasic
Paste Expiration:
Never
Burn after read
10 Minutes
1 Hour
1 Day
1 Week
2 Weeks
1 Month
6 Months
1 Year
Paste Exposure:
Public
Unlisted
Private
Folder:
(members only)
Password
NEW
Enabled
Disabled
Burn after read
NEW
Paste Name / Title:
Create New Paste
Hello
Guest
Sign Up
or
Login
Sign in with Facebook
Sign in with Twitter
Sign in with Google
You are currently not logged in, this means you can not edit or delete anything you paste.
Sign Up
or
Login
Public Pastes
FnafHuntedAdapter
Lua | 34 min ago | 18.52 KB
MTG/RiffleShuffle Simulation
Python | 51 min ago | 4.58 KB
300$ GIFTCARDS? P8
Java | 54 min ago | 0.07 KB
FREE 500$ GIFTCARDS???? VF
Java | 55 min ago | 0.07 KB
Make 3500$ in 1 day [Method]???? XH
Java | 56 min ago | 0.06 KB
?FREE Method Leaked? 1Y
Java | 57 min ago | 0.07 KB
?Make 1500$ in 1 day [Method]? AZ
Java | 58 min ago | 0.07 KB
200 INSTANTLY [Works Worldwide]? SD
Java | 60 min ago | 0.07 KB
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the
Cookies Policy
.
OK, I Understand
Not a member of Pastebin yet?
Sign Up
, it unlocks many cool features!
