Create a new version of paste:

#TURN ON
�U��UUUUUUUUUUUUU�U�U�U�UU�UUUUUUU�UUUU�U�U�U�U�U�U�UUUUUUU��HELLO! BOOT0 is starting!
boot0 version : 4.0.0
fel_flag = 0x00000000
rtc[0] value = 0x00000000
rtc[1] value = 0x000000cf
rtc[2] value = 0x00000000
rtc[3] value = 0xf1f18000
DRAM DRIVE INFO: V1.6
DRAM Type =3 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
DRAM zq value: 00007bbbDRAM CLK =480 MHZ
USE PLL DDR1
USE PLL NORMAL
PLL FREQUENCE = 960 MHZ
DRAM master priority setting ok.
Auto calculate timing parameter!
para_dram_tpr0 = 0046210c
para_dram_tpr1 = 01c2210a
para_dram_tpr2 = 0005403a
tcl = 6,tcwl = 4
DRAM TIMING PARA0 = 0a0c180a
DRAM TIMING PARA1 = 0003040c
DRAM TIMING PARA2 = 0406050a
DRAM TIMING PARA3 = 0000400c
DRAM TIMING PARA4 = 04020404
DRAM TIMING PARA5 = 05050403
DRAM TIMING PARA8 = 90003310
DRAM PHY INTERFACE PARA = 02040102
DRAM VTC is disable
DRAM dynamic DQS/DQ ODT is on
DRAM DQS gate is PD mode.
DRAM two rank training is on,the value is 93003587
DRAM work mode register value = 004318e5
DRAM SIZE =1024 M
set two rank ODTMAP
DRAM simple test OK.
dram size =1024
NAND_ClkRequest, nand_index: 0x00001000
Reg 0x01c20080: 0x00053de3
Reg 0x01c20060: 0x00053dd6
Reg 0x01c202c0: 0x00053dd6
NAND_SetClk, nand_index: 0x0000000a
Reg 0x01c20080: 0x00053de7
NB0 : nand phy init ok
sum=7d786e79
src_sum=7d786e79
Ready to disable icache.
Jump to secend Boot.
[      0.295]

U-Boot 2011.09-rc1-00003-gfba9653-dirty (Oct 15 2015 - 01:19:26) Allwinner Technology 

[      0.305]version: 1.1.0
[      0.390]pmbus:   normal or secure os
ready
[      0.394]PMU: AXP221
[      0.397]PMU: AXP22x found
bat_vol=4147, ratio=94
[      0.402]PMU: dcdc3 1200
[      0.405]PMU: pll1 1008 Mhz,PLL6=600 Mhz
AXI=336 Mhz,AHB=200 Mhz, APB1=100 Mhz 
set power on vol to default
dcdc1_vol = 3000
dcdc2_vol = 1100
dcdc3_vol = 1200
dcdc4_vol = 0
dcdc5_vol = 1500
aldo2_vol = 2500
aldo3_vol = 3000
find power_sply to end
vbus not exist
only battery exist, limit to dc
fel key old mode
run key detect
no key found
no key input
dram_para_set start
dram_para_set end
[      0.533]DRAM:  1 GiB
relocation Offset is: 35af7000
OSAL_Power_Set:<axp22, eldo1>
smcl's set manager is NULL
<axp22, eldo1>
OSAL_Power_Enable:<axp22, eldo1>
workmode = 0
[      0.693]NAND: NAND_UbootInit
NAND_UbootInit start
NB1 : enter NAND_LogicInit
uboot:physical version: 2 1f 20141023 1640 
nand : get id_number_ctl from script, 2
uboot:nand info: 9394de45 ffff5076 1118c 321f09 4 
nand : get CapacityLevel fail, 7fb8a453
not burn nand partition table!
NB1 : nftl num: 2 
 init nftl: 0 
NB1 : NAND_LogicInit ok, result = 0x0 
[      1.830]sunxi flash init ok
out of usb burn from boot: without usb
In:    serial
Out:   serial
Err:   serial
--------fastboot partitions--------
-total partitions:11-
-name-        -start-       -size-      
bootloader  : 1000000       2000000     
env         : 3000000       1000000     
boot        : 4000000       1000000     
system      : 5000000       53333200    
misc        : 58333200      1000000     
recovery    : 59333200      2000000     
cache       : 5b333200      30000000    
metadata    : 8b333200      1000000     
private     : 8c333200      1000000     
alog        : 8d333200      5000000     
UDISK       : 92333200      0           
-----------------------------------
base bootcmd=run setargs_nand boot_normal
bootcmd set setargs_nand
key 0
recovery key high 100, low 2
cant find fstbt value
misc partition found
to be run cmd=run setargs_nand boot_normal

** Unable to read "sn.txt" from sunxi_flash 8:0 **
load file(sn.txt) error 
serial is: 034c1b28d6f500000000
mount part name bootloader
cant open script.bin, maybe it is not exist
WORK_MODE_BOOT
board_status_probe
[      1.950]key trigger
sunxi_bmp_logo_display
screen_id =0, screen_width =800, screen_height =1280
[      2.160]Hit any key to stop autoboot:  0 
read boot or recovery all
[      2.692]sunxi flash read :offset 4000000, 13159009 bytes OK
no signature
[      2.702]ready to boot
para err in disp_ioctl, cmd = 0xa,screen id = 1
[      2.708][mmc]: MMC Device 2 not found
[      2.712][mmc]:  mmc  not find,so not exit
NAND_UbootExit
NB1 : NAND_LogicExit
nand release dma:0
[      2.716]
Starting kernel ...

[    0.536744] WRN:L486(drivers/usb/sunxi_usb/hcd/hcd0/sunxi_hcd0.c):get no_suspend status failed


#Turn OFF
[  141.236985] SysRq : Emergency Remount R/O
[  142.460418] hci: ERR: sunxi_ehci is disable, need not shutdown
[  142.470569] Power down.