Create a new version of paste:

package RT::Authen::ExternalAuth;

our $VERSION = '0.09';

=head1 NAME

  RT::Authen::ExternalAuth - RT Authentication using External Sources

=head1 DESCRIPTION

  A complete package for adding external authentication mechanisms
  to RT. It currently supports LDAP via Net::LDAP and External Database
  authentication for any database with an installed DBI driver.

  It also allows for authenticating cookie information against an
  external database through the use of the RT-Authen-CookieAuth extension.

  MODIFIED IN 2011/10/01 By Luciano Silva - lucianoes at ufrgs dot br
  This version is only numeric UID LDAP. Use at your own risk.		

=begin testing

ok(require RT::Authen::ExternalAuth);

=end testing

=cut    

use RT::Authen::ExternalAuth::LDAP;
use RT::Authen::ExternalAuth::DBI;

use strict;

sub DoAuth {
    my ($session,$given_user,$given_pass) = @_;

    unless(defined($RT::ExternalAuthPriority)) {
        return (0, "ExternalAuthPriority not defined, please check your configuration file.");
    }

    my $no_info_check = 0;
    unless(defined($RT::ExternalInfoPriority)) {
        $RT::Logger->debug("ExternalInfoPriority not defined. User information (including user enabled/disabled cannot be externally-sourced");
        $no_info_check = 1;
    }

    # This may be used by single sign-on (SSO) authentication mechanisms for bypassing a password check.
    my $pass_bypass = 0;
    my $success = 0;

    # Should have checked if user is already logged in before calling this function,
    # but just in case, we'll check too.
    return (0, "User already logged in!") if ($session->{'CurrentUser'} && $session->{'CurrentUser'}->Id);
    # We don't have a logged in user. Let's try all our available methods in order.
    # last if success, next if not.
    
    # Get the prioritised list of external authentication services
    my @auth_services = @$RT::ExternalAuthPriority;
    
    # For each of those services..
    foreach my $service (@auth_services) {

	$pass_bypass = 0;

        # Get the full configuration for that service as a hashref
        my $config = $RT::ExternalSettings->{$service};
        $RT::Logger->debug( "Attempting to use external auth service:",
                            $service);

        # $username will be the final username we decide to check
        # This will not necessarily be $given_user
        my $username = undef;
        
        #############################################################
        ####################### SSO Check ###########################
        #############################################################
        if ($config->{'type'} eq 'cookie') {    
            # Currently, Cookie authentication is our only SSO method
            $username = RT::Authen::ExternalAuth::DBI::GetCookieAuth($config);
        }
        #############################################################
        
        # If $username is defined, we have a good SSO $username and can
        # safely bypass the password checking later on; primarily because
        # it's VERY unlikely we even have a password to check if an SSO succeeded.
        $pass_bypass = 0;
	if(defined($username)) {
	    $RT::Logger->debug("Pass not going to be checked, attempting SSO");
            $pass_bypass = 1;
        } else {

	    # SSO failed and no $user was passed for a login attempt
	    # We only don't return here because the next iteration could be an SSO attempt
	    unless(defined($given_user)) {
	    	$RT::Logger->debug("SSO Failed and no user to test with. Nexting");
		next;
	    }

            # We don't have an SSO login, so we will be using the credentials given
            # on RT's login page to do our authentication.
            $username = $given_user;
    
            # Don't continue unless the service works.
	    # next unless RT::Authen::ExternalAuth::TestConnection($config);

            # Don't continue unless the $username exists in the external service

	    $RT::Logger->debug("Calling UserExists with \$username ($username) and \$service ($service)");
            next unless RT::Authen::ExternalAuth::UserExists($username, $service);
        }

        ####################################################################
        ########## Load / Auto-Create ######################################
        ####################################################################
        # We are now sure that we're talking about a valid RT user.
        # If the user already exists, load up their info. If they don't
        # then we need to create the user in RT.
	#MODIF
	my $MagicUid = "a";
	#END_MODIF
        # Does user already exist internally to RT?
	$RT::Logger->debug("Auto-Create process, this is where the magic really happens!! Put the A letter befone the UID"); 
        $session->{'CurrentUser'} = RT::CurrentUser->new();
        $session->{'CurrentUser'}->Load($MagicUid . $username);
        #$session->{'CurrentUser'}->Load($username);
	
        # Unless we have loaded a valid user with a UserID create one.
        unless ($session->{'CurrentUser'}->Id) {
			my $UserObj = RT::User->new($RT::SystemUser);
        	my ($val, $msg) = 
              $UserObj->Create(%{ref($RT::AutoCreate) ? $RT::AutoCreate : {}},
                               Name   => ("a" . $username),
			       Gecos  => $username,
                              );
            unless ($val) {
                $RT::Logger->error( "Couldn't create user $username: $msg" );
                next;
            }
            $RT::Logger->info(  "Autocreated external user",
                                $UserObj->Name,
                                "(",
                                $UserObj->Id,
                                ")");
            
            $RT::Logger->debug("Loading new user (",
            					$username,
            					") into current session");
        $session->{'CurrentUser'}->Load("a" . $username);
        $RT::Logger->debug("Did the system load the the userseme with a ? Otherwise the next step will fail.");

        } 
        
        ####################################################################
        ########## Authentication ##########################################
        ####################################################################
        # If we successfully used an SSO service, then authentication
        # succeeded. If we didn't then, success is determined by a password
        # test.
        $success = 0;
	if($pass_bypass) {
            $RT::Logger->debug("Password check bypassed due to SSO method being in use");
            $success = 1;
        } else {
            $RT::Logger->debug("Password validation required for service - Executing...");
            $success = RT::Authen::ExternalAuth::GetAuth($service,$username,$given_pass);
        }
       
        $RT::Logger->debug("Password Validation Check Result: ",$success);

        # If the password check succeeded then this is our authoritative service
        # and we proceed to user information update and login.
        last if $success;
    }
    
    # If we got here and don't have a user loaded we must have failed to
    # get a full, valid user from an authoritative external source.
    unless ($session->{'CurrentUser'} && $session->{'CurrentUser'}->Id) {
        delete $session->{'CurrentUser'};
        return (0, "No User");
    }

    unless($success) {
        delete $session->{'CurrentUser'};
	return (0, "Password Invalid");
    }
    
    # Otherwise we succeeded.
    $RT::Logger->debug("Authentication successful. Now updating user information and attempting login.");
        
    ####################################################################################################
    ############################### The following is auth-method agnostic ##############################
    ####################################################################################################
    
    # If we STILL have a completely valid RT user to play with...
    # and therefore password has been validated...
    if ($session->{'CurrentUser'} && $session->{'CurrentUser'}->Id) {
        
        # Even if we have JUST created the user in RT, we are going to
        # reload their information from an external source. This allows us
        # to be sure that the user the cookie gave us really does exist in
        # the database, but more importantly, UpdateFromExternal will check 
        # whether the user is disabled or not which we have not been able to 
        # do during auto-create

	# These are not currently used, but may be used in the future.
	my $info_updated = 0;
	my $info_updated_msg = "User info not updated";

        unless($no_info_check) {
            # Note that UpdateUserInfo does not care how we authenticated the user
            # It will look up user info from whatever is specified in $RT::ExternalInfoPriority
            ($info_updated,$info_updated_msg) = RT::Authen::ExternalAuth::UpdateUserInfo($session->{'CurrentUser'}->Name);
        }
                
        # Now that we definitely have up-to-date user information,
        # if the user is disabled, kick them out. Now!
        if ($session->{'CurrentUser'}->UserObj->Disabled) {
            delete $session->{'CurrentUser'};
            return (0, "User account disabled, login denied");
        }
    }
    
    # If we **STILL** have a full user and the session hasn't already been deleted
    # This If/Else is logically unnecessary, but it doesn't hurt to leave it here
    # just in case. Especially to be a double-check to future modifications.
    if ($session->{'CurrentUser'} && $session->{'CurrentUser'}->Id) {
            
            $RT::Logger->info(  "Successful login for",
                                $session->{'CurrentUser'}->Name,
                                "from",
                                $ENV{'REMOTE_ADDR'});
            # Do not delete the session. User stays logged in and
            # autohandler will not check the password again
    } else {
            # Make SURE the session is deleted.
            delete $session->{'CurrentUser'};
            return (0, "Failed to authenticate externally");
            # This will cause autohandler to request IsPassword 
            # which will in turn call IsExternalPassword
    }
    
    return (1, "Successful login");
}

sub UpdateUserInfo {
    my $username        = shift;

    # Prepare for the worst...
    my $found           = 0;
    my $updated         = 0;
    my $msg             = "User NOT updated";

    my $user_disabled 	= RT::Authen::ExternalAuth::UserDisabled($username);

    my $UserObj = RT::User->new($RT::SystemUser);
    $UserObj->Load($username);        

    # If user is disabled, set the RT::Principle to disabled and return out of the function.
    # I think it's a waste of time and energy to update a user's information if they are disabled
    # and it could be a security risk if they've updated their external information with some 
    # carefully concocted code to try to break RT - worst case scenario, but they have been 
    # denied access after all, don't take any chances.
     
    # If someone gives me a good enough reason to do it, 
    # then I'll update all the info for disabled users

    if ($user_disabled) {
        # Make sure principle is disabled in RT
        my ($val, $message) = $UserObj->SetDisabled(1);
        # Log what has happened
        $RT::Logger->info("User marked as DISABLED (",
                            $username,
                            ") per External Service", 
                            "($val, $message)\n");
        $msg = "User Disabled";
        
        return ($updated, $msg);
    }    
        
    # Make sure principle is not disabled in RT
    my ($val, $message) = $UserObj->SetDisabled(0);
    # Log what has happened
    $RT::Logger->info("User marked as ENABLED (",
                        $username,
                        ") per External Service",
                        "($val, $message)\n");

    # Update their info from external service using the username as the lookup key
    # CanonicalizeUserInfo will work out for itself which service to use
    # Passing it a service instead could break other RT code
    #MODIFICACAO - Incluido o substring no $username para remover o caracter a
    my %args = (Name => substr($username,1));
    $UserObj->CanonicalizeUserInfo(\%args);

    # For each piece of information returned by CanonicalizeUserInfo,
    # run the Set method for that piece of info to change it for the user
    foreach my $key (sort(keys(%args))) {
        next unless $args{$key};
        my $method = "Set$key";
        # We do this on the UserObj from above, not self so that there 
        # are no permission restrictions on setting information
        my ($method_success,$method_msg) = $UserObj->$method($args{$key});
        
        # If your user information is not getting updated, 
        # uncomment the following logging statements
        if ($method_success) {
            # At DEBUG level, log that method succeeded
             $RT::Logger->debug((caller(0))[3],"$method Succeeded. $method_msg");
        } else {
            # At DEBUG level, log that method failed
             $RT::Logger->debug((caller(0))[3],"$method Failed. $method_msg");
        }
    }

    # Confirm update success
    $updated = 1;
    $RT::Logger->debug( "UPDATED user (",
                        $username,
                        ") from External Service\n");
    $msg = 'User updated';

    return ($updated, $msg);
}

sub GetAuth {

    # Request a username/password check from the specified service
    # This is only valid for non-SSO services.
    
    my ($service,$username,$password) = @_;
    
    my $success = 0;
    
    # Get the full configuration for that service as a hashref
    my $config = $RT::ExternalSettings->{$service};
    
    # And then act accordingly depending on what type of service it is.
    # Right now, there is only code for DBI and LDAP non-SSO services
    if ($config->{'type'} eq 'db') {    
        $success = RT::Authen::ExternalAuth::DBI::GetAuth($service,$username,$password);
	$RT::Logger->debug("DBI password validation result:",$success);
    } elsif ($config->{'type'} eq 'ldap') {
        $success = RT::Authen::ExternalAuth::LDAP::GetAuth($service,$username,$password);
	$RT::Logger->debug("LDAP password validation result:",$success);
    } else {
        $RT::Logger->error("Invalid service type for GetAuth:",$service);
    }
    
    return $success; 
}

sub UserExists {

    # Request a username/password check from the specified service
    # This is only valid for non-SSO services.
#    my $removemagic = substr($username, 1);	
#    my ($removemagic,$service) = @_;
    my ($username,$service) = @_;

    my $success = 0;

    # Get the full configuration for that service as a hashref
    my $config = $RT::ExternalSettings->{$service};

    # And then act accordingly depending on what type of service it is.
    # Right now, there is only code for DBI and LDAP non-SSO services
    if ($config->{'type'} eq 'db') {
        $success = RT::Authen::ExternalAuth::DBI::UserExists($username,$service);
    } elsif ($config->{'type'} eq 'ldap') {
	my $magicnewname = substr($username, '0', 8);
	my $username = $magicnewname;
	$success = RT::Authen::ExternalAuth::LDAP::UserExists($username,$service);
    } else {
        $RT::Logger->debug("Invalid service type for UserExists:",$service);
    }

    return $success;
}

sub UserDisabled {
    $RT::Logger->debug("Now is starting UserDisabled function");	
    my $username = shift;
    my $user_disabled = 0;
    
    my @info_services = $RT::ExternalInfoPriority ? @{$RT::ExternalInfoPriority} : undef;

    # For each named service in the list
    # Check to see if the user is found in the external service
    # If not found, jump to next service
    # If found, check to see if user is considered disabled by the service
    # Then update the user's info in RT and return
    foreach my $service (@info_services) {
        
        # Get the external config for this service as a hashref        
        my $config = $RT::ExternalSettings->{$service};
        
        # If the config doesn't exist, don't bother doing anything, skip to next in list.
        unless(defined($config)) {
            $RT::Logger->debug("You haven't defined a configuration for the service named \"",
                                $service,
                                "\" so I'm not going to try to get user information from it. Skipping...");
            next;
        }
        
        # If it's a DBI config:
        if ($config->{'type'} eq 'db') {
            
            unless(RT::Authen::ExternalAuth::DBI::UserExists($username,$service)) {
                $RT::Logger->debug("User (",
                                    $username,
                                    ") doesn't exist in service (",
                                    $service,
                                    ") - Cannot update information - Skipping...");
                next;
            }
            $user_disabled = RT::Authen::ExternalAuth::DBI::UserDisabled($username,$service);
            
        } elsif ($config->{'type'} eq 'ldap') {
	$RT::Logger->debug("Removing special character A from the username.");             
            unless(RT::Authen::ExternalAuth::LDAP::UserExists(substr($username,1),$service)) {
                $RT::Logger->debug("User (",
                                    $username,
                                    ") doesn't exist in service (",
                                    $service,
                                    ") - Cannot update information - Skipping...");
                next;
            }
	$RT::Logger->debug("New check on LDAP the username, but removing the special character A from the username.");	
            $user_disabled = RT::Authen::ExternalAuth::LDAP::UserDisabled(substr($username,1),$service);
                    
        } elsif ($config->{'type'} eq 'cookie') {
            RT::Logger->error("You cannot use SSO Cookies as an information service.");
            next;
        } else {
            # The type of external service doesn't currently have any methods associated with it. Or it's a typo.
            RT::Logger->error("Invalid type specification for config %config->{'name'}");
            # Drop out to next service in list
            next;
        }
    
    }
    return $user_disabled;
}

sub CanonicalizeUserInfo {
     $RT::Logger->debug("Now is starting CanonicalizeUserInfo function"); 
    # Careful, this $args hashref was given to RT::User::CanonicalizeUserInfo and
    # then transparently passed on to this function. The whole purpose is to update
    # the original hash as whatever passed it to RT::User is expecting to continue its
    # code with an update args hash.
    
    my $UserObj = shift;
    my $args    = shift;
    
    my $found   = 0;
    my %params  = (Name         => undef,
                  EmailAddress => undef,
                  RealName     => undef);
    
    $RT::Logger->debug( (caller(0))[3], 
                        "called by", 
                        caller, 
                        "with:", 
                        join(", ", map {sprintf("%s: %s", $_, $args->{$_})}
                            sort(keys(%$args))));

    # Get the list of defined external services
    my @info_services = $RT::ExternalInfoPriority ? @{$RT::ExternalInfoPriority} : undef;
    # For each external service...
    foreach my $service (@info_services) {
        
        $RT::Logger->debug( "Attempting to get user info using this external service:",
                            $service);
        
        # Get the config for the service so that we know what attrs we can canonicalize
        my $config = $RT::ExternalSettings->{$service};
        
        if($config->{'type'} eq 'cookie'){
            $RT::Logger->debug("You cannot use SSO cookies as an information service!");
            next;
        }  
        
        # For each attr we've been told to canonicalize in the match list
        foreach my $rt_attr (@{$config->{'attr_match_list'}}) {
            # Jump to the next attr in $args if this one isn't in the attr_match_list
            $RT::Logger->debug( "Attempting to use this canonicalization key:",$rt_attr);
            unless(defined($args->{$rt_attr})) {
                $RT::Logger->debug("This attribute (",
                                    $rt_attr,
                                    ") is null or incorrectly defined in the attr_map for this service (",
                                    $service,
                                    ")");
                next;
            }
                               
            # Else, use it as a canonicalization key and lookup the user info    
            my $key = $config->{'attr_map'}->{$rt_attr};
            my $value = $args->{$rt_attr};
            
            # Check to see that the key being asked for is defined in the config's attr_map
            my $valid = 0;
            my ($attr_key, $attr_value);
            my $attr_map = $config->{'attr_map'};
            while (($attr_key, $attr_value) = each %$attr_map) {
                $valid = 1 if ($key eq $attr_value);
            }
            unless ($valid){
                $RT::Logger->debug( "This key (",
                                    $key,
                                    "is not a valid attribute key (",
                                    $service,
                                    ")");
                next;
            }
            
            # Use an if/elsif structure to do a lookup with any custom code needed 
            # for any given type of external service, or die if no code exists for
            # the service requested.
            
            if($config->{'type'} eq 'ldap'){    
                ($found, %params) = RT::Authen::ExternalAuth::LDAP::CanonicalizeUserInfo($service,$key,$value);
            } elsif ($config->{'type'} eq 'db') {
                ($found, %params) = RT::Authen::ExternalAuth::DBI::CanonicalizeUserInfo($service,$key,$value);
            } else {
                $RT::Logger->debug( (caller(0))[3],
                                    "does not consider",
                                    $service,
                                    "a valid information service");
            }
       
            # Don't Check any more attributes
            last if $found;
        }
        # Don't Check any more services
        last if $found;
    }
    
    # If found, Canonicalize Email Address and 
    # update the args hash that we were given the hashref for
    if ($found) {
        # It's important that we always have a canonical email address
        if ($params{'EmailAddress'}) {
            $params{'EmailAddress'} = $UserObj->CanonicalizeEmailAddress($params{'EmailAddress'});
        } 
        %$args = (%$args, %params);
    }

    $RT::Logger->info(  (caller(0))[3], 
                        "returning", 
                        join(", ", map {sprintf("%s: %s", $_, $args->{$_})} 
                            sort(keys(%$args))));

    ### HACK: The config var below is to overcome the (IMO) bug in
    ### RT::User::Create() which expects this function to always
    ### return true or rejects the user for creation. This should be
    ### a different config var (CreateUncanonicalizedUsers) and 
    ### should be honored in RT::User::Create()
    return($found || $RT::AutoCreateNonExternalUsers);
   
}

{
    no warnings 'redefine';
    *RT::User::CanonicalizeUserInfo = sub {
        my $self = shift;
        my $args = shift;
        return ( CanonicalizeUserInfo( $self, $args ) );
    };
}

1;