Pastebin
API
tools
faq
paste
Login
Sign up
Please fix the following errors:
New Paste
Syntax Highlighting
From 6262c4d634eac9843d0933b4b7d3b077c6ff2ad9 Mon Sep 17 00:00:00 2001 From: Sanjeev Premi <premi@localhost> Date: Fri, 23 Sep 2011 18:14:20 +0530 Subject: [PATCH 1/7] omap3evm: Prepare to split configuration This patch marks the beginning of steps that would lead to clean and easy split of the configuration file. Common portion can then be re-used by other configurations. Signed-off-by: Sanjeev Premi <premi@localhost> --- include/configs/omap3_evm.h | 21 +++++++++++++++------ 1 files changed, 15 insertions(+), 6 deletions(-) diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index dd44ae3..2bf9b91 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -33,6 +33,21 @@ #ifndef __CONFIG_H #define __CONFIG_H +#include <asm/arch/cpu.h> +#include <asm/arch/omap3.h> + +/* ============================================================================= + * This section holds the common definitions that correspond to the + * current default configuration - omap3_evm_config + * ============================================================================= + */ + +/* ============================================================================= + * This section holds the common definitions that can be used by + * all OMAP3EVM based configurations. + * ============================================================================= + */ + /* * High Level Configuration Options */ @@ -46,12 +61,6 @@ #define CONFIG_OMAP3_MICRON_DDR /* with MICRON DDR part */ #define CONFIG_TWL4030_POWER /* with TWL4030 PMIC */ -/* - * Get cpu and chip specific definitions - */ -#include <asm/arch/cpu.h> -#include <asm/arch/omap3.h> - #undef CONFIG_USE_IRQ /* no support for IRQs */ /* -- 1.7.0.4 From 54ea938b8626b6f476ff90cfe4f0250867d83ef2 Mon Sep 17 00:00:00 2001 From: Sanjeev Premi <premi@localhost> Date: Fri, 23 Sep 2011 18:30:25 +0530 Subject: [PATCH 2/7] Incremental delta Signed-off-by: Sanjeev Premi <premi@localhost> --- include/configs/omap3_evm.h | 14 +++++++------- 1 files changed, 7 insertions(+), 7 deletions(-) diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index 2bf9b91..87666db 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -1,6 +1,8 @@ /* - * (C) Copyright 2006-2008 - * Texas Instruments. + * Configuration settings for the TI OMAP3 EVM board. + * + * Copyright (C) 2006-2011 Texas Instruments Incorporated - http://www.ti.com/ + * * Author : * Manikandan Pillai <mani.pillai@ti.com> * Derived from Beagle Board and 3430 SDP code by @@ -9,8 +11,6 @@ * * Manikandan Pillai <mani.pillai@ti.com> * - * Configuration settings for the TI OMAP3 EVM board. - * * See file CREDITS for list of people who contributed to this * project. * @@ -30,8 +30,8 @@ * MA 02111-1307 USA */ -#ifndef __CONFIG_H -#define __CONFIG_H +#ifndef __OMAP3EVM_CONFIG_H +#define __OMAP3EVM_CONFIG_H #include <asm/arch/cpu.h> #include <asm/arch/omap3.h> @@ -403,4 +403,4 @@ "fi; " \ "else run nandboot; fi" -#endif /* __CONFIG_H */ +#endif /* __OMAP3EVM_CONFIG_H */ -- 1.7.0.4 From f49040e5fc42e2b9a42075e0c078379587127e18 Mon Sep 17 00:00:00 2001 From: Sanjeev Premi <premi@localhost> Date: Fri, 23 Sep 2011 18:39:29 +0530 Subject: [PATCH 3/7] Incremental delta Signed-off-by: Sanjeev Premi <premi@localhost> --- include/configs/omap3_evm.h | 47 +++++++++++++++++++++++------------------- 1 files changed, 26 insertions(+), 21 deletions(-) diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index 87666db..6fdc336 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -42,6 +42,29 @@ * ============================================================================= */ +/* ---------------------------------------------------------------------------- + * Supported U-boot commands + * ---------------------------------------------------------------------------- + */ + +/* Default commands to include */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_EXT2 /* EXT2 Support */ +#define CONFIG_CMD_FAT /* FAT support */ +#define CONFIG_CMD_JFFS2 /* JFFS2 Support */ + +#define CONFIG_CMD_I2C /* I2C serial bus support */ +#define CONFIG_CMD_MMC /* MMC support */ +#define CONFIG_CMD_NAND /* NAND support */ +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PING + +#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ +#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ +#undef CONFIG_CMD_IMI /* iminfo */ +#undef CONFIG_CMD_IMLS /* List all found images */ + /* ============================================================================= * This section holds the common definitions that can be used by * all OMAP3EVM based configurations. @@ -49,7 +72,7 @@ */ /* - * High Level Configuration Options + * High level configuration options */ #define CONFIG_OMAP /* This is TI OMAP core */ #define CONFIG_OMAP34XX /* belonging to 34XX family */ @@ -86,10 +109,10 @@ /* * Stack sizes - * - * The stack sizes are set up in start.S using the settings below + * These values are used in start.S */ #define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ + #ifdef CONFIG_USE_IRQ #define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */ #define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */ @@ -286,24 +309,6 @@ /* Size of bootarg buffer */ #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) -/* Default commands to include */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_EXT2 /* EXT2 Support */ -#define CONFIG_CMD_FAT /* FAT support */ -#define CONFIG_CMD_JFFS2 /* JFFS2 Support */ - -#define CONFIG_CMD_I2C /* I2C serial bus support */ -#define CONFIG_CMD_MMC /* MMC support */ -#define CONFIG_CMD_NAND /* NAND support */ -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_PING - -#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ -#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ -#undef CONFIG_CMD_IMI /* iminfo */ -#undef CONFIG_CMD_IMLS /* List all found images */ - /* * Additional definitions that depend on chosen commands */ -- 1.7.0.4 From 5e2b1907ecf352387ae0380c529a866196f50e8f Mon Sep 17 00:00:00 2001 From: Sanjeev Premi <premi@localhost> Date: Fri, 23 Sep 2011 18:41:29 +0530 Subject: [PATCH 4/7] Incremental delta Signed-off-by: Sanjeev Premi <premi@localhost> --- include/configs/omap3_evm.h | 29 +++++++++++++++++------------ 1 files changed, 17 insertions(+), 12 deletions(-) diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index 6fdc336..e8d11b9 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -65,6 +65,23 @@ #undef CONFIG_CMD_IMI /* iminfo */ #undef CONFIG_CMD_IMLS /* List all found images */ +/* ---------------------------------------------------------------------------- + * Supported U-boot features + * ---------------------------------------------------------------------------- + */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_HUSH_PARSER + +/* Display CPU and Board information */ +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +/* Allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +/* Add auto-completion support */ +#define CONFIG_AUTO_COMPLETE + /* ============================================================================= * This section holds the common definitions that can be used by * all OMAP3EVM based configurations. @@ -276,16 +293,10 @@ * U-boot features * ---------------------------------------------------------------------------- */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_PROMPT "OMAP3_EVM # " #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #define CONFIG_SYS_MAXARGS 16 /* max args for a command */ -/* Display CPU and Board information */ -#define CONFIG_DISPLAY_CPUINFO -#define CONFIG_DISPLAY_BOARDINFO - #define CONFIG_MISC_INIT_R #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ @@ -293,12 +304,6 @@ #define CONFIG_INITRD_TAG #define CONFIG_REVISION_TAG -/* Allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -/* Add auto-completion support */ -#define CONFIG_AUTO_COMPLETE - /* Size of Console IO buffer */ #define CONFIG_SYS_CBSIZE 512 -- 1.7.0.4 From c23693d934b9e31b14484b84dd1b3cbf70c843e2 Mon Sep 17 00:00:00 2001 From: Sanjeev Premi <premi@localhost> Date: Fri, 23 Sep 2011 18:42:54 +0530 Subject: [PATCH 5/7] Incremental delta Signed-off-by: Sanjeev Premi <premi@localhost> --- include/configs/omap3_evm.h | 40 +++++++++++++++++++++++----------------- 1 files changed, 23 insertions(+), 17 deletions(-) diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index e8d11b9..0fa0d6e 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -82,6 +82,27 @@ /* Add auto-completion support */ #define CONFIG_AUTO_COMPLETE +/* ---------------------------------------------------------------------------- + * Supported hardware + * ---------------------------------------------------------------------------- + */ + +/* MMC */ +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_OMAP_HSMMC +#define CONFIG_DOS_PARTITION + +/* USB + * + * Enable CONFIG_MUSB_HCD for Host functionalities MSC, keyboard + * Enable CONFIG_MUSB_UDD for Device functionalities. + */ +#define CONFIG_USB_OMAP3 +#define CONFIG_MUSB_HCD +/* #define CONFIG_MUSB_UDC */ + + /* ============================================================================= * This section holds the common definitions that can be used by * all OMAP3EVM based configurations. @@ -242,22 +263,8 @@ #define CONFIG_JFFS2_PART_SIZE 0xf980000 /* - * MMC - */ -#define CONFIG_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_OMAP_HSMMC -#define CONFIG_DOS_PARTITION - -/* USB - * - * Enable CONFIG_MUSB_HCD for Host functionalities MSC, keyboard - * Enable CONFIG_MUSB_UDD for Device functionalities. + * USB */ -#define CONFIG_USB_OMAP3 -#define CONFIG_MUSB_HCD -/* #define CONFIG_MUSB_UDC */ - #ifdef CONFIG_USB_OMAP3 #ifdef CONFIG_MUSB_HCD @@ -315,9 +322,8 @@ #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) /* - * Additional definitions that depend on chosen commands + * NAND / OneNAND */ -/* NAND */ #if defined(CONFIG_CMD_NAND) #define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE -- 1.7.0.4 From d9476b5dd274774f2166c696bd9ca70e0425d947 Mon Sep 17 00:00:00 2001 From: Sanjeev Premi <premi@localhost> Date: Fri, 23 Sep 2011 18:52:13 +0530 Subject: [PATCH 6/7] Incremental delta Signed-off-by: Sanjeev Premi <premi@localhost> --- include/configs/omap3_evm.h | 90 +++++++++++++++++++++--------------------- 1 files changed, 45 insertions(+), 45 deletions(-) diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index 0fa0d6e..0cd59ba 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -102,6 +102,49 @@ #define CONFIG_MUSB_HCD /* #define CONFIG_MUSB_UDC */ +/* ----------------------------------------------------------------------------- + * Default environment + * ----------------------------------------------------------------------------- + */ +#define CONFIG_BOOTDELAY 10 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "loadaddr=0x82000000\0" \ + "usbtty=cdc_acm\0" \ + "mmcdev=0\0" \ + "memsize=128M\0" \ + "console=ttyO0,115200n8\0" \ + "mmcargs=setenv bootargs console=${console} " \ + "mem=${memsize}\0 " \ + "root=/dev/mmcblk0p2 rw " \ + "rootfstype=ext3 rootwait\0" \ + "nandargs=setenv bootargs console=${console} " \ + "mem=${memsize}\0 " \ + "root=/dev/mtdblock4 rw " \ + "rootfstype=jffs2\0" \ + "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ + "bootscript=echo Running bootscript from mmc ...; " \ + "source ${loadaddr}\0" \ + "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "run mmcargs; " \ + "bootm ${loadaddr}\0" \ + "nandboot=echo Booting from nand ...; " \ + "run nandargs; " \ + "onenand read ${loadaddr} 280000 400000; " \ + "bootm ${loadaddr}\0" \ + +#define CONFIG_BOOTCOMMAND \ + "if mmc rescan ${mmcdev}; then " \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loaduimage; then " \ + "run mmcboot; " \ + "else run nandboot; " \ + "fi; " \ + "fi; " \ + "else run nandboot; fi" /* ============================================================================= * This section holds the common definitions that can be used by @@ -321,6 +364,8 @@ /* Size of bootarg buffer */ #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) +#define CONFIG_BOOTFILE uImage + /* * NAND / OneNAND */ @@ -374,49 +419,4 @@ /* Uncomment to define the board revision statically */ /* #define CONFIG_STATIC_BOARD_REV OMAP3EVM_BOARD_GEN_2 */ -/* ----------------------------------------------------------------------------- - * Default environment - * ----------------------------------------------------------------------------- - */ -#define CONFIG_BOOTDELAY 10 -#define CONFIG_BOOTFILE uImage - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "loadaddr=0x82000000\0" \ - "usbtty=cdc_acm\0" \ - "mmcdev=0\0" \ - "memsize=128M\0" \ - "console=ttyO0,115200n8\0" \ - "mmcargs=setenv bootargs console=${console} " \ - "mem=${memsize}\0 " \ - "root=/dev/mmcblk0p2 rw " \ - "rootfstype=ext3 rootwait\0" \ - "nandargs=setenv bootargs console=${console} " \ - "mem=${memsize}\0 " \ - "root=/dev/mtdblock4 rw " \ - "rootfstype=jffs2\0" \ - "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ - "bootscript=echo Running bootscript from mmc ...; " \ - "source ${loadaddr}\0" \ - "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ - "mmcboot=echo Booting from mmc ...; " \ - "run mmcargs; " \ - "bootm ${loadaddr}\0" \ - "nandboot=echo Booting from nand ...; " \ - "run nandargs; " \ - "onenand read ${loadaddr} 280000 400000; " \ - "bootm ${loadaddr}\0" \ - -#define CONFIG_BOOTCOMMAND \ - "if mmc rescan ${mmcdev}; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loaduimage; then " \ - "run mmcboot; " \ - "else run nandboot; " \ - "fi; " \ - "fi; " \ - "else run nandboot; fi" - #endif /* __OMAP3EVM_CONFIG_H */ -- 1.7.0.4 From 97bed455bc369bc1ab2f2213ff949e9273efc2b2 Mon Sep 17 00:00:00 2001 From: Sanjeev Premi <premi@localhost> Date: Fri, 23 Sep 2011 19:10:15 +0530 Subject: [PATCH 7/7] omap3evm: move common config options to new file This patch moves common config options to a new file. Common options can now be included in other board configs for this evm. Signed-off-by: Sanjeev Premi <premi@localhost> --- include/configs/omap3_evm.h | 299 ++---------------------------------- include/configs/omap3_evm_common.h | 287 ++++++++++++++++++++++++++++++++++ 2 files changed, 299 insertions(+), 287 deletions(-) create mode 100644 include/configs/omap3_evm_common.h diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index 0cd59ba..824c6dd 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -36,27 +36,19 @@ #include <asm/arch/cpu.h> #include <asm/arch/omap3.h> -/* ============================================================================= - * This section holds the common definitions that correspond to the - * current default configuration - omap3_evm_config - * ============================================================================= - */ - /* ---------------------------------------------------------------------------- * Supported U-boot commands * ---------------------------------------------------------------------------- */ - -/* Default commands to include */ #include <config_cmd_default.h> -#define CONFIG_CMD_EXT2 /* EXT2 Support */ -#define CONFIG_CMD_FAT /* FAT support */ -#define CONFIG_CMD_JFFS2 /* JFFS2 Support */ +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_I2C /* I2C serial bus support */ -#define CONFIG_CMD_MMC /* MMC support */ -#define CONFIG_CMD_NAND /* NAND support */ +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MMC +#define CONFIG_CMD_NAND #define CONFIG_CMD_DHCP #define CONFIG_CMD_PING @@ -103,6 +95,12 @@ /* #define CONFIG_MUSB_UDC */ /* ----------------------------------------------------------------------------- + * Include common board configuration + * ----------------------------------------------------------------------------- + */ +#include "omap3_evm_common.h" + +/* ----------------------------------------------------------------------------- * Default environment * ----------------------------------------------------------------------------- */ @@ -146,277 +144,4 @@ "fi; " \ "else run nandboot; fi" -/* ============================================================================= - * This section holds the common definitions that can be used by - * all OMAP3EVM based configurations. - * ============================================================================= - */ - -/* - * High level configuration options - */ -#define CONFIG_OMAP /* This is TI OMAP core */ -#define CONFIG_OMAP34XX /* belonging to 34XX family */ -#define CONFIG_OMAP3430 /* which is in a 3430 */ - -#define CONFIG_SDRC /* The chip has SDRC controller */ - -#define CONFIG_OMAP3_EVM /* This is a OMAP3 EVM */ -#define CONFIG_OMAP3_MICRON_DDR /* with MICRON DDR part */ -#define CONFIG_TWL4030_POWER /* with TWL4030 PMIC */ - -#undef CONFIG_USE_IRQ /* no support for IRQs */ - -/* - * Clock related definitions - */ -#define V_OSCK 26000000 /* Clock output from T2 */ -#define V_SCLK (V_OSCK >> 1) - -/* - * OMAP3 has 12 GP timers, they can be driven by the system clock - * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). - * This rate is divided by a local divisor. - */ -#define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 -#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000 - -/* Size of environment - 128KB */ -#define CONFIG_ENV_SIZE (128 << 10) - -/* Size of malloc pool */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) - -/* - * Stack sizes - * These values are used in start.S - */ -#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ - -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */ -#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */ -#endif - -/* - * Physical Memory Map - * Note 1: CS1 may or may not be populated - * Note 2: SDRAM size is expected to be at least 32MB - */ -#define CONFIG_NR_DRAM_BANKS 2 -#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 -#define PHYS_SDRAM_1_SIZE (32 << 20) -#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 - -/* SDRAM Bank Allocation method */ -#define SDRC_R_B_C - -/* Limits for memtest */ -#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) -#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \ - 0x01F00000) /* 31MB */ - -/* Default load address */ -#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) - -/* ----------------------------------------------------------------------------- - * Hardware drivers - * ----------------------------------------------------------------------------- - */ - -/* - * NS16550 Configuration - */ -#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ - -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK - -/* - * select serial console configuration - */ -#define CONFIG_CONS_INDEX 1 -#define CONFIG_SERIAL1 1 /* UART1 on OMAP3 EVM */ -#define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1 -#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ - 115200} - -/* - * I2C - */ -#define CONFIG_HARD_I2C -#define CONFIG_DRIVER_OMAP34XX_I2C - -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_I2C_SLAVE 1 -#define CONFIG_SYS_I2C_BUS 0 -#define CONFIG_SYS_I2C_BUS_SELECT 1 - -/* - * PISMO support - */ -#define PISMO1_NAND_SIZE GPMC_SIZE_128M -#define PISMO1_ONEN_SIZE GPMC_SIZE_128M - -/* Monitor at start of flash - Reserve 2 sectors */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE - -#define CONFIG_SYS_MONITOR_LEN (256 << 10) - -/* Start location & size of environment */ -#define ONENAND_ENV_OFFSET 0x260000 -#define SMNAND_ENV_OFFSET 0x260000 - -#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ - -/* - * NAND - */ -/* Physical address to access NAND */ -#define CONFIG_SYS_NAND_ADDR NAND_BASE - -/* Physical address to access NAND at CS0 */ -#define CONFIG_SYS_NAND_BASE NAND_BASE - -/* Max number of NAND devices */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 - -/* Timeout values (in ticks) */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ) -#define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ) - -/* Flash banks JFFS2 should use */ -#define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \ - CONFIG_SYS_MAX_NAND_DEVICE) - -#define CONFIG_SYS_JFFS2_MEM_NAND -#define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS -#define CONFIG_SYS_JFFS2_NUM_BANKS 1 - -#define CONFIG_JFFS2_NAND -/* nand device jffs2 lives on */ -#define CONFIG_JFFS2_DEV "nand0" -/* Start of jffs2 partition */ -#define CONFIG_JFFS2_PART_OFFSET 0x680000 -/* Size of jffs2 partition */ -#define CONFIG_JFFS2_PART_SIZE 0xf980000 - -/* - * USB - */ -#ifdef CONFIG_USB_OMAP3 - -#ifdef CONFIG_MUSB_HCD -#define CONFIG_CMD_USB - -#define CONFIG_USB_STORAGE -#define CONGIG_CMD_STORAGE -#define CONFIG_CMD_FAT - -#ifdef CONFIG_USB_KEYBOARD -#define CONFIG_SYS_USB_EVENT_POLL -#define CONFIG_PREBOOT "usb start" -#endif /* CONFIG_USB_KEYBOARD */ - -#endif /* CONFIG_MUSB_HCD */ - -#ifdef CONFIG_MUSB_UDC -/* USB device configuration */ -#define CONFIG_USB_DEVICE -#define CONFIG_USB_TTY -#define CONFIG_SYS_CONSOLE_IS_IN_ENV - -/* Change these to suit your needs */ -#define CONFIG_USBD_VENDORID 0x0451 -#define CONFIG_USBD_PRODUCTID 0x5678 -#define CONFIG_USBD_MANUFACTURER "Texas Instruments" -#define CONFIG_USBD_PRODUCT_NAME "EVM" -#endif /* CONFIG_MUSB_UDC */ - -#endif /* CONFIG_USB_OMAP3 */ - -/* ---------------------------------------------------------------------------- - * U-boot features - * ---------------------------------------------------------------------------- - */ -#define CONFIG_SYS_PROMPT "OMAP3_EVM # " -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CONFIG_SYS_MAXARGS 16 /* max args for a command */ - -#define CONFIG_MISC_INIT_R - -#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG -#define CONFIG_REVISION_TAG - -/* Size of Console IO buffer */ -#define CONFIG_SYS_CBSIZE 512 - -/* Size of print buffer */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) - -/* Size of bootarg buffer */ -#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) - -#define CONFIG_BOOTFILE uImage - -/* - * NAND / OneNAND - */ -#if defined(CONFIG_CMD_NAND) -#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE - -#define CONFIG_NAND_OMAP_GPMC -#define GPMC_NAND_ECC_LP_x16_LAYOUT -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET -#elif defined(CONFIG_CMD_ONENAND) -#define CONFIG_SYS_FLASH_BASE PISMO1_ONEN_BASE -#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP - -#define CONFIG_ENV_IS_IN_ONENAND -#define CONFIG_ENV_OFFSET ONENAND_ENV_OFFSET -#endif - -#define CONFIG_ENV_ADDR CONFIG_ENV_OFFSET - -#if defined(CONFIG_CMD_NET) - -/* Ethernet (SMSC9115 from SMSC9118 family) */ -#define CONFIG_NET_MULTI -#define CONFIG_SMC911X -#define CONFIG_SMC911X_32_BIT -#define CONFIG_SMC911X_BASE 0x2C000000 - -/* BOOTP fields */ -#define CONFIG_BOOTP_SUBNETMASK 0x00000001 -#define CONFIG_BOOTP_GATEWAY 0x00000002 -#define CONFIG_BOOTP_HOSTNAME 0x00000004 -#define CONFIG_BOOTP_BOOTPATH 0x00000010 - -#endif /* CONFIG_CMD_NET */ - -/* Support for relocation */ -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 -#define CONFIG_SYS_INIT_RAM_SIZE 0x800 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) - -/* ----------------------------------------------------------------------------- - * Board specific - * ----------------------------------------------------------------------------- - */ -#define CONFIG_SYS_NO_FLASH - -/* Uncomment to define the board revision statically */ -/* #define CONFIG_STATIC_BOARD_REV OMAP3EVM_BOARD_GEN_2 */ - #endif /* __OMAP3EVM_CONFIG_H */ diff --git a/include/configs/omap3_evm_common.h b/include/configs/omap3_evm_common.h new file mode 100644 index 0000000..baa74bf --- /dev/null +++ b/include/configs/omap3_evm_common.h @@ -0,0 +1,287 @@ +/* + * Common configuration settings for the TI OMAP3 EVM board. + * + * Copyright (C) 2006-2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __OMAP3_EVM_COMMON_H +#define __OMAP3_EVM_COMMON_H + +/* + * High level configuration options + */ +#define CONFIG_OMAP /* This is TI OMAP core */ +#define CONFIG_OMAP34XX /* belonging to 34XX family */ +#define CONFIG_OMAP3430 /* which is in a 3430 */ + +#define CONFIG_SDRC /* The chip has SDRC controller */ + +#define CONFIG_OMAP3_EVM /* This is a OMAP3 EVM */ +#define CONFIG_OMAP3_MICRON_DDR /* with MICRON DDR part */ +#define CONFIG_TWL4030_POWER /* with TWL4030 PMIC */ + +#undef CONFIG_USE_IRQ /* no support for IRQs */ + +/* + * Clock related definitions + */ +#define V_OSCK 26000000 /* Clock output from T2 */ +#define V_SCLK (V_OSCK >> 1) + +/* + * OMAP3 has 12 GP timers, they can be driven by the system clock + * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). + * This rate is divided by a local divisor. + */ +#define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 +#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ +#define CONFIG_SYS_HZ 1000 + +/* Size of environment - 128KB */ +#define CONFIG_ENV_SIZE (128 << 10) + +/* Size of malloc pool */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) + +/* + * Stack sizes + * These values are used in start.S + */ +#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ + +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */ +#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */ +#endif + +/* + * Physical Memory Map + * Note 1: CS1 may or may not be populated + * Note 2: SDRAM size is expected to be at least 32MB + */ +#define CONFIG_NR_DRAM_BANKS 2 +#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 +#define PHYS_SDRAM_1_SIZE (32 << 20) +#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 + +/* SDRAM Bank Allocation method */ +#define SDRC_R_B_C + +/* Limits for memtest */ +#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) +#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \ + 0x01F00000) /* 31MB */ + +/* Default load address */ +#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) + +/* ----------------------------------------------------------------------------- + * Hardware drivers + * ----------------------------------------------------------------------------- + */ + +/* + * NS16550 Configuration + */ +#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ + +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK + +/* + * select serial console configuration + */ +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SERIAL1 1 /* UART1 on OMAP3 EVM */ +#define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ + 115200} + +/* + * I2C + */ +#define CONFIG_HARD_I2C +#define CONFIG_DRIVER_OMAP34XX_I2C + +#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C_SLAVE 1 +#define CONFIG_SYS_I2C_BUS 0 +#define CONFIG_SYS_I2C_BUS_SELECT 1 + +/* + * PISMO support + */ +#define PISMO1_NAND_SIZE GPMC_SIZE_128M +#define PISMO1_ONEN_SIZE GPMC_SIZE_128M + +/* Monitor at start of flash - Reserve 2 sectors */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE + +#define CONFIG_SYS_MONITOR_LEN (256 << 10) + +/* Start location & size of environment */ +#define ONENAND_ENV_OFFSET 0x260000 +#define SMNAND_ENV_OFFSET 0x260000 + +#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ + +/* + * NAND + */ +/* Physical address to access NAND */ +#define CONFIG_SYS_NAND_ADDR NAND_BASE + +/* Physical address to access NAND at CS0 */ +#define CONFIG_SYS_NAND_BASE NAND_BASE + +/* Max number of NAND devices */ +#define CONFIG_SYS_MAX_NAND_DEVICE 1 + +/* Timeout values (in ticks) */ +#define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ) +#define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ) + +/* Flash banks JFFS2 should use */ +#define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \ + CONFIG_SYS_MAX_NAND_DEVICE) + +#define CONFIG_SYS_JFFS2_MEM_NAND +#define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS +#define CONFIG_SYS_JFFS2_NUM_BANKS 1 + +#define CONFIG_JFFS2_NAND +/* nand device jffs2 lives on */ +#define CONFIG_JFFS2_DEV "nand0" +/* Start of jffs2 partition */ +#define CONFIG_JFFS2_PART_OFFSET 0x680000 +/* Size of jffs2 partition */ +#define CONFIG_JFFS2_PART_SIZE 0xf980000 + +/* + * USB + */ +#ifdef CONFIG_USB_OMAP3 + +#ifdef CONFIG_MUSB_HCD +#define CONFIG_CMD_USB + +#define CONFIG_USB_STORAGE +#define CONGIG_CMD_STORAGE +#define CONFIG_CMD_FAT + +#ifdef CONFIG_USB_KEYBOARD +#define CONFIG_SYS_USB_EVENT_POLL +#define CONFIG_PREBOOT "usb start" +#endif /* CONFIG_USB_KEYBOARD */ + +#endif /* CONFIG_MUSB_HCD */ + +#ifdef CONFIG_MUSB_UDC +/* USB device configuration */ +#define CONFIG_USB_DEVICE +#define CONFIG_USB_TTY +#define CONFIG_SYS_CONSOLE_IS_IN_ENV + +/* Change these to suit your needs */ +#define CONFIG_USBD_VENDORID 0x0451 +#define CONFIG_USBD_PRODUCTID 0x5678 +#define CONFIG_USBD_MANUFACTURER "Texas Instruments" +#define CONFIG_USBD_PRODUCT_NAME "EVM" +#endif /* CONFIG_MUSB_UDC */ + +#endif /* CONFIG_USB_OMAP3 */ + +/* ---------------------------------------------------------------------------- + * U-boot features + * ---------------------------------------------------------------------------- + */ +#define CONFIG_SYS_PROMPT "OMAP3_EVM # " +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_MAXARGS 16 /* max args for a command */ + +#define CONFIG_MISC_INIT_R + +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define CONFIG_REVISION_TAG + +/* Size of Console IO buffer */ +#define CONFIG_SYS_CBSIZE 512 + +/* Size of print buffer */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) + +/* Size of bootarg buffer */ +#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) + +#define CONFIG_BOOTFILE uImage + +/* + * NAND / OneNAND + */ +#if defined(CONFIG_CMD_NAND) +#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE + +#define CONFIG_NAND_OMAP_GPMC +#define GPMC_NAND_ECC_LP_x16_LAYOUT +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET +#elif defined(CONFIG_CMD_ONENAND) +#define CONFIG_SYS_FLASH_BASE PISMO1_ONEN_BASE +#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP + +#define CONFIG_ENV_IS_IN_ONENAND +#define CONFIG_ENV_OFFSET ONENAND_ENV_OFFSET +#endif + +#define CONFIG_ENV_ADDR CONFIG_ENV_OFFSET + +#if defined(CONFIG_CMD_NET) + +/* Ethernet (SMSC9115 from SMSC9118 family) */ +#define CONFIG_NET_MULTI +#define CONFIG_SMC911X +#define CONFIG_SMC911X_32_BIT +#define CONFIG_SMC911X_BASE 0x2C000000 + +/* BOOTP fields */ +#define CONFIG_BOOTP_SUBNETMASK 0x00000001 +#define CONFIG_BOOTP_GATEWAY 0x00000002 +#define CONFIG_BOOTP_HOSTNAME 0x00000004 +#define CONFIG_BOOTP_BOOTPATH 0x00000010 + +#endif /* CONFIG_CMD_NET */ + +/* Support for relocation */ +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 +#define CONFIG_SYS_INIT_RAM_SIZE 0x800 +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) + +/* ----------------------------------------------------------------------------- + * Board specific + * ----------------------------------------------------------------------------- + */ +#define CONFIG_SYS_NO_FLASH + +/* Uncomment to define the board revision statically */ +/* #define CONFIG_STATIC_BOARD_REV OMAP3EVM_BOARD_GEN_2 */ + +#endif /* __OMAP3_EVM_COMMON_H */ -- 1.7.0.4
Optional Paste Settings
Category:
None
Cryptocurrency
Cybersecurity
Fixit
Food
Gaming
Haiku
Help
History
Housing
Jokes
Legal
Money
Movies
Music
Pets
Photo
Science
Software
Source Code
Spirit
Sports
Travel
TV
Writing
Tags:
Syntax Highlighting:
None
Bash
C
C#
C++
CSS
HTML
JSON
Java
JavaScript
Lua
Markdown (PRO members only)
Objective C
PHP
Perl
Python
Ruby
Swift
4CS
6502 ACME Cross Assembler
6502 Kick Assembler
6502 TASM/64TASS
ABAP
AIMMS
ALGOL 68
APT Sources
ARM
ASM (NASM)
ASP
ActionScript
ActionScript 3
Ada
Apache Log
AppleScript
Arduino
Asymptote
AutoIt
Autohotkey
Avisynth
Awk
BASCOM AVR
BNF
BOO
Bash
Basic4GL
Batch
BibTeX
Blitz Basic
Blitz3D
BlitzMax
BrainFuck
C
C (WinAPI)
C Intermediate Language
C for Macs
C#
C++
C++ (WinAPI)
C++ (with Qt extensions)
C: Loadrunner
CAD DCL
CAD Lisp
CFDG
CMake
COBOL
CSS
Ceylon
ChaiScript
Chapel
Clojure
Clone C
Clone C++
CoffeeScript
ColdFusion
Cuesheet
D
DCL
DCPU-16
DCS
DIV
DOT
Dart
Delphi
Delphi Prism (Oxygene)
Diff
E
ECMAScript
EPC
Easytrieve
Eiffel
Email
Erlang
Euphoria
F#
FO Language
Falcon
Filemaker
Formula One
Fortran
FreeBasic
FreeSWITCH
GAMBAS
GDB
GDScript
Game Maker
Genero
Genie
GetText
Go
Godot GLSL
Groovy
GwBasic
HQ9 Plus
HTML
HTML 5
Haskell
Haxe
HicEst
IDL
INI file
INTERCAL
IO
ISPF Panel Definition
Icon
Inno Script
J
JCL
JSON
Java
Java 5
JavaScript
Julia
KSP (Kontakt Script)
KiXtart
Kotlin
LDIF
LLVM
LOL Code
LScript
Latex
Liberty BASIC
Linden Scripting
Lisp
Loco Basic
Logtalk
Lotus Formulas
Lotus Script
Lua
M68000 Assembler
MIX Assembler
MK-61/52
MPASM
MXML
MagikSF
Make
MapBasic
Markdown (PRO members only)
MatLab
Mercury
MetaPost
Modula 2
Modula 3
Motorola 68000 HiSoft Dev
MySQL
Nagios
NetRexx
Nginx
Nim
NullSoft Installer
OCaml
OCaml Brief
Oberon 2
Objeck Programming Langua
Objective C
Octave
Open Object Rexx
OpenBSD PACKET FILTER
OpenGL Shading
Openoffice BASIC
Oracle 11
Oracle 8
Oz
PARI/GP
PCRE
PHP
PHP Brief
PL/I
PL/SQL
POV-Ray
ParaSail
Pascal
Pawn
Per
Perl
Perl 6
Phix
Pic 16
Pike
Pixel Bender
PostScript
PostgreSQL
PowerBuilder
PowerShell
ProFTPd
Progress
Prolog
Properties
ProvideX
Puppet
PureBasic
PyCon
Python
Python for S60
QBasic
QML
R
RBScript
REBOL
REG
RPM Spec
Racket
Rails
Rexx
Robots
Roff Manpage
Ruby
Ruby Gnuplot
Rust
SAS
SCL
SPARK
SPARQL
SQF
SQL
SSH Config
Scala
Scheme
Scilab
SdlBasic
Smalltalk
Smarty
StandardML
StoneScript
SuperCollider
Swift
SystemVerilog
T-SQL
TCL
TeXgraph
Tera Term
TypeScript
TypoScript
UPC
Unicon
UnrealScript
Urbi
VB.NET
VBScript
VHDL
VIM
Vala
Vedit
VeriLog
Visual Pro Log
VisualBasic
VisualFoxPro
WHOIS
WhiteSpace
Winbatch
XBasic
XML
XPP
Xojo
Xorg Config
YAML
YARA
Z80 Assembler
ZXBasic
autoconf
jQuery
mIRC
newLISP
q/kdb+
thinBasic
Paste Expiration:
Never
Burn after read
10 Minutes
1 Hour
1 Day
1 Week
2 Weeks
1 Month
6 Months
1 Year
Paste Exposure:
Public
Unlisted
Private
Folder:
(members only)
Password
NEW
Enabled
Disabled
Burn after read
NEW
Paste Name / Title:
Create New Paste
Hello
Guest
Sign Up
or
Login
Sign in with Facebook
Sign in with Twitter
Sign in with Google
You are currently not logged in, this means you can not edit or delete anything you paste.
Sign Up
or
Login
Public Pastes
⭐⭐⭐Exchange Exploit T I⭐⭐⭐
Java | 5 sec ago | 0.06 KB
⭐⭐⭐MAKE $9OO INSTANTLY D A⭐⭐⭐
Java | 18 sec ago | 0.09 KB
⭐⭐⭐Exchange Exploit T I⭐⭐⭐
Java | 1 min ago | 0.06 KB
⭐⭐⭐Swapzone Glitch (Working)⭐⭐⭐
Java | 1 min ago | 0.09 KB
⭐⭐⭐MAKE $9OO INSTANTLY D A⭐⭐⭐
Java | 1 min ago | 0.06 KB
⭐⭐⭐Make $1500 in 20 minutes⭐⭐⭐
Java | 1 min ago | 0.06 KB
⭐⭐⭐Make $1500 in 20 minutes⭐⭐⭐
Java | 2 min ago | 0.09 KB
⭐⭐⭐Make $15OO in 2O minutesV E⭐⭐⭐
Java | 2 min ago | 0.06 KB
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the
Cookies Policy
.
OK, I Understand
Not a member of Pastebin yet?
Sign Up
, it unlocks many cool features!
