Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Linux version 5.4.36 (cheche@casa) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r13138-3a79e3b185)) #0 SMP Sun May 3 17:31:30 2020
- [ 0.000000] Detected Broadcom 0x6368 CPU revision b2
- [ 0.000000] CPU frequency is 400 MHz
- [ 0.000000] 64MB of RAM installed
- [ 0.000000] board_bcm963xx: Boot address 0xb8000000
- [ 0.000000] board_bcm963xx: CFE version: 1.0.37-107.23
- [ 0.000000] printk: bootconsole [early0] enabled
- [ 0.000000] CPU0 revision is: 0002a031 (Broadcom BMIPS4350)
- [ 0.000000] board: board name: 96368MVWG
- [ 0.000000] MIPS: machine is Zyxel P870HNU-51b
- [ 0.000000] Initrd not found or empty - disabling initrd
- [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes.
- [ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
- [ 0.000000] Zone ranges:
- [ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
- [ 0.000000] On node 0 totalpages: 16384
- [ 0.000000] Normal zone: 144 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 16384 pages, LIFO batch:3
- [ 0.000000] percpu: Embedded 14 pages/cpu s26032 r8192 d23120 u57344
- [ 0.000000] pcpu-alloc: s26032 r8192 d23120 u57344 alloc=14*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16240
- [ 0.000000] Kernel command line: rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
- [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
- [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes, linear)
- [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
- [ 0.000000] Memory: 56880K/65536K available (5061K kernel code, 203K rwdata, 1112K rodata, 1296K init, 201K bss, 8656K reserved, 0K cma-reserved)
- [ 0.000000] SLUB: HWalign=16, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
- [ 0.000000] rcu: Hierarchical RCU implementation.
- [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
- [ 0.000000] NR_IRQS: 256
- [ 0.000000] genirq: irq_chip bcm6345-periph-intc did not update eff. affinity mask of irq 28
- [ 0.000000] random: get_random_bytes called from start_kernel+0x338/0x568 with crng_init=0
- [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
- [ 0.000014] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
- [ 0.008138] Calibrating delay loop... 397.82 BogoMIPS (lpj=795648)
- [ 0.046462] pid_max: default: 32768 minimum: 301
- [ 0.051551] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
- [ 0.059101] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
- [ 0.072189] rcu: Hierarchical SRCU implementation.
- [ 0.078380] smp: Bringing up secondary CPUs ...
- [ 0.084677] SMP: Booting CPU1...
- [ 3.400154] Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes.
- [ 3.400171] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
- [ 3.400428] CPU1 revision is: 0002a031 (Broadcom BMIPS4350)
- [ 0.116159] Synchronize counters for CPU 1:
- [ 0.116179] SMP: CPU1 is running
- [ 0.116201] done.
- [ 0.146713] smp: Brought up 1 node, 2 CPUs
- [ 0.159101] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
- [ 0.169132] futex hash table entries: 512 (order: 1, 8192 bytes, linear)
- [ 0.176402] pinctrl core: initialized pinctrl subsystem
- [ 0.182803] NET: Registered protocol family 16
- --------------
- [ 0.209186] registering PCI controller with io_map_base unset
- [ 0.260601] PCI host bridge to bus 0000:00
- [ 0.264850] pci_bus 0000:00: root bus resource [mem 0x30000000-0x37ffffff]
- [ 0.271894] pci_bus 0000:00: root bus resource [io 0x8000000-0x800ffff]
- [ 0.278792] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
- [ 0.285775] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
- [ 0.294090] pci 0000:00:01.0: [14e4:a8d6] type 00 class 0x028000
- [ 0.302299] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x00003fff]
- [ 0.316314] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
- [ 0.323138] pci 0000:00:01.0: BAR 0: assigned [mem 0x30000000-0x30003fff]
- --------------
- [ 0.337250] clocksource: Switched to clocksource MIPS
- [ 0.345623] b43-pci-bridge 0000:00:01.0: enabling device (0000 -> 0002)
- [ 0.381795] ssb: Found chip with id 0xA8D6, rev 0x00 and package 0x08
- --------------
- [ 0.433407] ssb: WARNING: Using fallback SPROM failed (err -2)
- [ 0.441610] b43-pci-bridge 0000:00:01.0: Failed to register PCI version of SSB with error -2
- [ 0.450802] b43-pci-bridge: probe of 0000:00:01.0 failed with error -2
- [ 0.458019] NET: Registered protocol family 2
- --------------
- [ 0.462485] random: fast init done
- [ 0.467380] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
- [ 0.476135] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
- [ 0.484062] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear)
- [ 0.491387] TCP: Hash tables configured (established 1024 bind 1024)
- [ 0.498370] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
- [ 0.505215] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
- [ 0.513006] NET: Registered protocol family 1
- [ 0.517611] PCI: CLS 0 bytes, default 16
- [ 0.526471] workingset: timestamp_bits=14 max_order=14 bucket_order=0
- [ 0.547192] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.553213] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
- [ 0.595636] bcm6368-pinctrl 10000080.pin-controller: registered at mmio (ptrval)
- [ 0.604399] 10000100.serial: ttyS0 at MMIO 0x10000100 (irq = 10, base_baud = 1562500) is a bcm63xx_uart
- [ 0.614148] printk: console [ttyS0] enabled
- [ 0.622735] printk: bootconsole [early0] disabled
- [ 0.642101] physmap-flash 18000000.nor: physmap platform flash device: [mem 0x18000000-0x19ffffff]
- [ 0.651591] 18000000.nor: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x00227e
- [ 0.661895] 18000000.nor: Found an alias at 0x1000000 for the chip at 0x0
- [ 0.661924] Amd/Fujitsu Extended Query Table at 0x0040
- [ 0.667197] Amd/Fujitsu Extended Query version 1.3.
- [ 0.672370] number of CFI chips: 1
- [ 0.677572] Searching for RedBoot partition table in 18000000.nor at offset 0xfe0000
- [ 0.719208] No RedBoot partition table detected in 18000000.nor
- [ 0.725527] 3 fixed-partitions partitions found on MTD device 18000000.nor
- [ 0.732589] Creating 3 MTD partitions on "18000000.nor":
- [ 0.738048] 0x000000000000-0x000000020000 : "CFE"
- [ 0.744913] 0x000000020000-0x000001000000 : "linux"
- [ 0.751890] parser_imagetag: rootfs: CFE image tag found at 0x0 with version 6, board type 96368MVWG
- [ 0.761331] parser_imagetag: Partition 0 is kernel offset 100 and length 2039d4
- [ 0.768823] parser_imagetag: Partition 1 is rootfs offset 203ad4 and length ddc52c
- [ 0.776613] parser_imagetag: Spare partition is offset 430004 and length bafffc
- [ 0.784208] 2 bcm963xx-imagetag partitions found on MTD device linux
- [ 0.790727] Creating 2 MTD partitions on "linux":
- [ 0.795573] 0x000000000100-0x000000203ad4 : "kernel"
- [ 0.802372] 0x000000203ad4-0x000000fe0000 : "rootfs"
- [ 0.809275] mtd: device 3 (rootfs) set to be root filesystem
- [ 0.815131] 1 squashfs-split partitions found on MTD device rootfs
- [ 0.821476] 0x000000440000-0x000000fe0000 : "rootfs_data"
- [ 0.828980] 0x000000fe0000-0x0000010e0000 : "nvram"
- --------------
- [ 0.833990] mtd: partition "nvram" extends beyond the end of device "18000000.nor" -- size truncated to 0x20000
- --------------
- [ 0.859450] bcm63xx-spi 10000800.spi: at [mem 0x10000800-0x10000f0b flags 0x200] (irq 9, FIFOs size 542)
- [ 0.870974] libphy: Fixed MDIO Bus: probed
- [ 0.917577] b53_common: found switch: BCM63xx, rev 0
- [ 0.923224] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
- --------------
- [ 0.931499] leds-gpio leds-gpio.0: Skipping unavailable LED gpio 0 ((null))
- [ 0.938706] leds-gpio leds-gpio.0: Skipping unavailable LED gpio 0 ((null))
- [ 0.945849] leds-gpio leds-gpio.0: Skipping unavailable LED gpio 0 ((null))
- [ 0.953017] leds-gpio leds-gpio.0: Skipping unavailable LED gpio 0 ((null))
- [ 0.960184] leds-gpio leds-gpio.0: Skipping unavailable LED gpio 0 ((null))
- --------------
- [ 0.969717] NET: Registered protocol family 10
- [ 0.987022] Segment Routing with IPv6
- [ 0.991057] NET: Registered protocol family 17
- [ 0.995710] 8021q: 802.1Q VLAN Support v1.8
- [ 1.007404] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
- [ 1.029400] Freeing unused kernel memory: 1296K
- [ 1.034049] This architecture does not have kernel memory protection.
- [ 1.040654] Run /sbin/init as init process
- [ 1.958809] init: Console is alive
- [ 1.962684] init: - watchdog -
- [ 3.244825] kmodloader: loading kernel modules from /etc/modules-boot.d/*
- [ 3.367886] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
- [ 3.380742] init: - preinit -
- [ 4.508739] random: jshn: uninitialized urandom read (4 bytes read)
- [ 4.576828] random: jshn: uninitialized urandom read (4 bytes read)
- [ 4.770260] random: jshn: uninitialized urandom read (4 bytes read)
- [ 5.434367] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
- [ 5.441372] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 5.581530] urandom_read: 2 callbacks suppressed
- [ 5.581552] random: procd: uninitialized urandom read (4 bytes read)
- [ 9.946887] jffs2: notice: (445) jffs2_build_xattr_subsystem: complete building xattr subsystem, 8 of xdatum (0 unchecked, 2 orphan) and 19 of xref (2 dead, 0 orphan) found.
- [ 9.964836] mount_root: switching to jffs2 overlay
- [ 10.010098] overlayfs: upper fs does not support tmpfile.
- [ 10.022699] urandom-seed: Seeding with /etc/urandom.seed
- [ 10.218341] procd: - early -
- [ 10.221472] procd: - watchdog -
- [ 10.875102] procd: - watchdog -
- [ 10.878783] procd: - ubus -
- [ 10.926479] random: ubusd: uninitialized urandom read (4 bytes read)
- [ 11.021414] random: ubusd: uninitialized urandom read (4 bytes read)
- [ 11.028598] random: ubusd: uninitialized urandom read (4 bytes read)
- [ 11.036921] procd: - init -
- [ 11.980605] kmodloader: loading kernel modules from /etc/modules.d/*
- [ 12.124775] Loading modules backported from Linux version v5.4.27-0-g585e0cc08069
- [ 12.132483] Backport generated by backports.git v5.4.27-1-0-gf6e8852f
- [ 12.187744] xt_time: kernel timezone is -0000
- [ 12.283067] urngd: v1.0.2 started.
- [ 12.446973] PPP generic driver version 2.4.2
- [ 12.455011] NET: Registered protocol family 24
- [ 12.522441] Broadcom 43xx driver loaded [ Features: PNL ]
- [ 12.539243] kmodloader: done loading kernel modules from /etc/modules.d/*
- [ 12.618632] random: crng init done
- [ 12.622112] random: 1 urandom warning(s) missed due to ratelimiting
- [ 24.127782] br-lan: port 1(eth0.1) entered blocking state
- [ 24.133643] br-lan: port 1(eth0.1) entered disabled state
- [ 24.139846] device eth0.1 entered promiscuous mode
- [ 24.144857] device eth0 entered promiscuous mode
- [ 24.153461] br-lan: port 1(eth0.1) entered blocking state
- [ 24.159064] br-lan: port 1(eth0.1) entered forwarding state
- [ 25.134408] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
- PUERTOS 2 y 3:
- --------------
- [ 165.420867] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on port1, 100Mbps, full-duplex
- [ 179.756759] bcm63xx_enetsw bcm63xx_enetsw.0: link DOWN on port1
- [ 196.140970] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on port2, 100Mbps, full-duplex
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement