Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Kernel Log
- [ 0.000000] Linux version 4.14.221 (builder@buildhost) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r11306-c4a6851c72)) #0 Mon Feb 15 15:22:37 2021
- [ 0.000000] bootconsole [early0] enabled
- [ 0.000000] CPU0 revision is: 00019750 (MIPS 74Kc)
- [ 0.000000] MIPS: machine is TP-Link Archer C7 v5
- [ 0.000000] SoC: Qualcomm Atheros QCA956X ver 1 rev 0
- [ 0.000000] Determined physical RAM map:
- [ 0.000000] memory: 08000000 @ 00000000 (usable)
- [ 0.000000] Initrd not found or empty - disabling initrd
- [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
- [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
- [ 0.000000] Zone ranges:
- [ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
- [ 0.000000] On node 0 totalpages: 32768
- [ 0.000000] free_area_init_node: node 0, pgdat 804fdf80, node_mem_map 810090a0
- [ 0.000000] Normal zone: 256 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 32768 pages, LIFO batch:7
- [ 0.000000] random: get_random_bytes called from 0x80501740 with crng_init=0
- [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
- [ 0.000000] pcpu-alloc: [0] 0
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32512
- [ 0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2
- [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
- [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
- [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
- [ 0.000000] Writing ErrCtl register=00000000
- [ 0.000000] Readback ErrCtl register=00000000
- [ 0.000000] Memory: 123296K/131072K available (4037K kernel code, 163K rwdata, 532K rodata, 1212K init, 212K bss, 7776K reserved, 0K cma-reserved)
- [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- [ 0.000000] NR_IRQS: 51
- [ 0.000000] CPU clock: 775.000 MHz
- [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4932285024 ns
- [ 0.000008] sched_clock: 32 bits at 387MHz, resolution 2ns, wraps every 5541893118ns
- [ 0.008237] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
- [ 0.074781] pid_max: default: 32768 minimum: 301
- [ 0.079800] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.086785] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.097857] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
- [ 0.108250] futex hash table entries: 256 (order: -1, 3072 bytes)
- [ 0.114743] pinctrl core: initialized pinctrl subsystem
- [ 0.122289] NET: Registered protocol family 16
- [ 0.129737] PCI host bridge /ahb/pcie-controller@18250000 ranges:
- [ 0.136213] MEM 0x0000000012000000..0x0000000013ffffff
- [ 0.141717] IO 0x0000000000000000..0x0000000000000000
- [ 0.161779] PCI host bridge to bus 0000:00
- [ 0.166103] pci_bus 0000:00: root bus resource [mem 0x12000000-0x13ffffff]
- [ 0.173387] pci_bus 0000:00: root bus resource [io 0x0000]
- [ 0.179258] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
- [ 0.186422] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
- [ 0.194793] pci 0000:00:00.0: [168c:003c] type 00 class 0x028000
- [ 0.194847] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
- [ 0.194899] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
- [ 0.194972] pci 0000:00:00.0: supports D1 D2
- [ 0.195145] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
- [ 0.195169] pci 0000:00:00.0: BAR 0: assigned [mem 0x12000000-0x121fffff 64bit]
- [ 0.202923] pci 0000:00:00.0: BAR 6: assigned [mem 0x12200000-0x1220ffff pref]
- [ 0.213082] clocksource: Switched to clocksource MIPS
- [ 0.219300] NET: Registered protocol family 2
- [ 0.224665] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.232021] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.238773] TCP: Hash tables configured (established 1024 bind 1024)
- [ 0.245602] UDP hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.251773] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.258631] NET: Registered protocol family 1
- [ 0.263294] PCI: CLS 0 bytes, default 32
- [ 0.265818] Crashlog allocated RAM at address 0x3f00000
- [ 0.272461] workingset: timestamp_bits=30 max_order=15 bucket_order=0
- [ 0.283502] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.289644] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
- [ 0.308226] io scheduler noop registered
- [ 0.312358] io scheduler deadline registered (default)
- [ 0.318118] ar7200-usb-phy usb-phy: phy reset is missing
- [ 0.325187] pinctrl-single 1804002c.pinmux: 544 pins at pa b804002c size 68
- [ 0.332952] gpio-export gpio-export: 1 gpio(s) exported
- [ 0.339227] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
- [ 0.347976] console [ttyS0] disabled
- [ 0.351779] 18020000.uart: ttyS0 at MMIO 0x18020000 (irq = 9, base_baud = 1562500) is a 16550A
- [ 0.360912] console [ttyS0] enabled
- [ 0.368477] bootconsole [early0] disabled
- [ 0.394193] m25p80 spi0.0: w25q128 (16384 Kbytes)
- [ 0.399108] 8 fixed-partitions partitions found on MTD device spi0.0
- [ 0.405692] Creating 8 MTD partitions on "spi0.0":
- [ 0.410644] 0x000000000000-0x000000020000 : "factory-uboot"
- [ 0.417090] 0x000000020000-0x000000040000 : "u-boot"
- [ 0.422835] 0x000000040000-0x000000050000 : "partition-table"
- [ 0.429465] 0x000000050000-0x000000060000 : "art"
- [ 0.435019] 0x000000060000-0x000000080000 : "info"
- [ 0.440603] 0x000000080000-0x0000000c0000 : "user-config"
- [ 0.446871] 0x0000000c0000-0x000000fc0000 : "firmware"
- [ 0.456569] 2 uimage-fw partitions found on MTD device firmware
- [ 0.462684] Creating 2 MTD partitions on "firmware":
- [ 0.467858] 0x000000000000-0x000000190000 : "kernel"
- [ 0.473643] 0x000000190000-0x000000f00000 : "rootfs"
- [ 0.479341] mtd: device 8 (rootfs) set to be root filesystem
- [ 0.485271] 1 squashfs-split partitions found on MTD device rootfs
- [ 0.491661] 0x000000450000-0x000000f00000 : "rootfs_data"
- [ 0.497867] 0x000000ff0000-0x000001000000 : "default-config"
- [ 0.505386] libphy: Fixed MDIO Bus: probed
- [ 1.183437] libphy: ag71xx_mdio: probed
- [ 1.190387] switch0: Atheros AR8337 rev. 2 switch registered on mdio-bus.0
- [ 1.844550] ag71xx 19000000.eth: connected to PHY at mdio-bus.0:00 [uid=004dd036, driver=Atheros AR8216/AR8236/AR8316]
- [ 1.856137] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode: sgmii
- [ 1.865222] NET: Registered protocol family 10
- [ 1.875062] Segment Routing with IPv6
- [ 1.878936] NET: Registered protocol family 17
- [ 1.883615] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
- [ 1.897007] 8021q: 802.1Q VLAN Support v1.8
- [ 1.903317] hctosys: unable to open rtc device (rtc0)
- [ 1.914003] VFS: Mounted root (squashfs filesystem) readonly on device 31:8.
- [ 1.927880] Freeing unused kernel memory: 1212K
- [ 1.932561] This architecture does not have kernel memory protection.
- [ 2.547075] init: Console is alive
- [ 2.550797] init: - watchdog -
- [ 2.563127] random: fast init done
- [ 3.594160] kmodloader: loading kernel modules from /etc/modules-boot.d/*
- [ 3.823714] usbcore: registered new interface driver usbfs
- [ 3.829462] usbcore: registered new interface driver hub
- [ 3.835071] usbcore: registered new device driver usb
- [ 3.845689] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 3.853971] ehci-platform: EHCI generic platform driver
- [ 3.859585] ehci-platform 1b000000.usb: EHCI Host Controller
- [ 3.865513] ehci-platform 1b000000.usb: new USB bus registered, assigned bus number 1
- [ 3.873707] ehci-platform 1b000000.usb: irq 13, io mem 0x1b000000
- [ 3.903127] ehci-platform 1b000000.usb: USB 2.0 started, EHCI 1.00
- [ 3.910179] hub 1-0:1.0: USB hub found
- [ 3.914447] hub 1-0:1.0: 1 port detected
- [ 3.919602] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
- [ 3.937499] init: - preinit -
- [ 4.895542] random: jshn: uninitialized urandom read (4 bytes read)
- [ 5.078736] random: jshn: uninitialized urandom read (4 bytes read)
- [ 5.329595] random: jshn: uninitialized urandom read (4 bytes read)
- [ 6.737857] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 6.744013] IPv6: ADDRCONF(NETDEV_UP): eth0.1: link is not ready
- [ 6.787808] urandom_read: 4 callbacks suppressed
- [ 6.787814] random: procd: uninitialized urandom read (4 bytes read)
- [ 7.794409] eth0: link up (1000Mbps/Full duplex)
- [ 7.799266] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 7.806068] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
- [ 10.013086] jffs2: notice: (507) jffs2_build_xattr_subsystem: complete building xattr subsystem, 79 of xdatum (2 unchecked, 77 orphan) and 111 of xref (75 dead, 7 orphan) found.
- [ 10.031252] mount_root: switching to jffs2 overlay
- [ 10.057159] overlayfs: upper fs does not support tmpfile.
- [ 10.068316] urandom-seed: Seeding with /etc/urandom.seed
- [ 10.173147] eth0: link down
- [ 10.192414] procd: - early -
- [ 10.196278] procd: - watchdog -
- [ 10.872979] procd: - watchdog -
- [ 10.876556] procd: - ubus -
- [ 10.936398] random: ubusd: uninitialized urandom read (4 bytes read)
- [ 10.944646] random: ubusd: uninitialized urandom read (4 bytes read)
- [ 10.952440] procd: - init -
- [ 11.904611] kmodloader: loading kernel modules from /etc/modules.d/*
- [ 11.931842] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 11.949616] Loading modules backported from Linux version v4.19.161-0-gdaefdc9eb24b
- [ 11.957586] Backport generated by backports.git v4.19.161-1-0-g4bb568fe
- [ 11.985113] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 12.010213] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
- [ 12.117814] xt_time: kernel timezone is -0000
- [ 12.127065] urngd: v1.0.2 started.
- [ 12.225277] PPP generic driver version 2.4.2
- [ 12.233868] NET: Registered protocol family 24
- [ 12.295878] ath10k 4.19 driver, optimized for CT firmware, probing pci device: 0x3c.
- [ 12.314026] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
- [ 12.320047] ath10k_pci 0000:00:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0
- [ 12.360103] random: crng init done
- [ 12.633462] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/fwcfg-pci-0000:00:00.0.txt failed with error -2
- [ 12.644373] ath10k_pci 0000:00:00.0: Falling back to user helper
- [ 12.922399] firmware ath10k!fwcfg-pci-0000:00:00.0.txt: firmware_loading_store: map pages failed
- [ 12.931784] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:00:00.0.bin failed with error -2
- [ 12.942865] ath10k_pci 0000:00:00.0: Falling back to user helper
- [ 13.321286] firmware ath10k!pre-cal-pci-0000:00:00.0.bin: firmware_loading_store: map pages failed
- [ 13.332532] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/ct-firmware-5.bin failed with error -2
- [ 13.343899] ath10k_pci 0000:00:00.0: Falling back to user helper
- [ 13.708255] firmware ath10k!QCA988X!hw2.0!ct-firmware-5.bin: firmware_loading_store: map pages failed
- [ 13.718078] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/ct-firmware-2.bin failed with error -2
- [ 13.729436] ath10k_pci 0000:00:00.0: Falling back to user helper
- [ 13.938734] firmware ath10k!QCA988X!hw2.0!ct-firmware-2.bin: firmware_loading_store: map pages failed
- [ 13.948558] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-6.bin failed with error -2
- [ 13.959648] ath10k_pci 0000:00:00.0: Falling back to user helper
- [ 14.142792] firmware ath10k!QCA988X!hw2.0!firmware-6.bin: firmware_loading_store: map pages failed
- [ 14.152341] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-5.bin failed with error -2
- [ 14.163425] ath10k_pci 0000:00:00.0: Falling back to user helper
- [ 14.341455] firmware ath10k!QCA988X!hw2.0!firmware-5.bin: firmware_loading_store: map pages failed
- [ 14.351003] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-4.bin failed with error -2
- [ 14.362086] ath10k_pci 0000:00:00.0: Falling back to user helper
- [ 14.543155] firmware ath10k!QCA988X!hw2.0!firmware-4.bin: firmware_loading_store: map pages failed
- [ 14.552660] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-3.bin failed with error -2
- [ 14.563750] ath10k_pci 0000:00:00.0: Falling back to user helper
- [ 14.740694] firmware ath10k!QCA988X!hw2.0!firmware-3.bin: firmware_loading_store: map pages failed
- [ 14.944596] ath10k_pci 0000:00:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000
- [ 14.954159] ath10k_pci 0000:00:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
- [ 14.966583] ath10k_pci 0000:00:00.0: firmware ver 10.1-ct-8x-__fW-022-538f0906 api 2 features wmi-10.x,has-wmi-mgmt-tx,mfp,txstatus-noack,wmi-10.x-CT,ratemask-CT,txrate-CT,get-temp-CT,tx-rc-CT,cust-stats-CT,retry-gt2-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT crc32 e1c91a74
- [ 15.023420] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/board-2.bin failed with error -2
- [ 15.034241] ath10k_pci 0000:00:00.0: Falling back to user helper
- [ 15.126558] firmware ath10k!QCA988X!hw2.0!board-2.bin: firmware_loading_store: map pages failed
- [ 15.136021] ath10k_pci 0000:00:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
- [ 16.085211] ath10k_pci 0000:00:00.0: 10.1 wmi init: vdevs: 16 peers: 127 tid: 256
- [ 16.102158] ath10k_pci 0000:00:00.0: wmi print 'P 128 V 8 T 410'
- [ 16.108627] ath10k_pci 0000:00:00.0: wmi print 'msdu-desc: 1424 sw-crypt: 0 ct-sta: 0'
- [ 16.116921] ath10k_pci 0000:00:00.0: wmi print 'alloc rem: 20984 iram: 25656'
- [ 16.166966] ath10k_pci 0000:00:00.0: htt-ver 2.1 wmi-op 2 htt-op 2 cal file max-sta 128 raw 0 hwcrypto 1
- [ 16.179978] ath10k_pci 0000:00:00.0: NOTE: Firmware DBGLOG output disabled in debug_mask: 0x10000000
- [ 16.316377] ath: EEPROM regdomain: 0x0
- [ 16.316383] ath: EEPROM indicates default country code should be used
- [ 16.316386] ath: doing EEPROM country->regdmn map search
- [ 16.316398] ath: country maps to regdmn code: 0x3a
- [ 16.316403] ath: Country alpha2 being used: US
- [ 16.316406] ath: Regpair used: 0x3a
- [ 16.380250] ath: EEPROM regdomain: 0x0
- [ 16.380258] ath: EEPROM indicates default country code should be used
- [ 16.380261] ath: doing EEPROM country->regdmn map search
- [ 16.380274] ath: country maps to regdmn code: 0x3a
- [ 16.380278] ath: Country alpha2 being used: US
- [ 16.380281] ath: Regpair used: 0x3a
- [ 16.392641] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
- [ 16.394234] ieee80211 phy1: Atheros AR9561 Rev:0 mem=0xb8100000, irq=2
- [ 16.440917] kmodloader: done loading kernel modules from /etc/modules.d/*
- [ 26.792404] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 26.799904] eth0: link up (1000Mbps/Full duplex)
- [ 26.821510] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 26.834885] br-lan: port 1(eth0.1) entered blocking state
- [ 26.840469] br-lan: port 1(eth0.1) entered disabled state
- [ 26.846380] device eth0.1 entered promiscuous mode
- [ 26.851335] device eth0 entered promiscuous mode
- [ 26.940900] br-lan: port 1(eth0.1) entered blocking state
- [ 26.946528] br-lan: port 1(eth0.1) entered forwarding state
- [ 26.952440] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
- [ 27.221582] br-wan: port 1(eth0.35) entered blocking state
- [ 27.227301] br-wan: port 1(eth0.35) entered disabled state
- [ 27.233256] device eth0.35 entered promiscuous mode
- [ 27.303206] br-wan: port 1(eth0.35) entered blocking state
- [ 27.308888] br-wan: port 1(eth0.35) entered forwarding state
- [ 27.793598] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
- [ 29.972843] pppoe-wan: renamed from ppp0
- [ 32.849860] ath10k_pci 0000:00:00.0: 10.1 wmi init: vdevs: 16 peers: 127 tid: 256
- [ 32.866808] ath10k_pci 0000:00:00.0: wmi print 'P 128 V 8 T 410'
- [ 32.873316] ath10k_pci 0000:00:00.0: wmi print 'msdu-desc: 1424 sw-crypt: 0 ct-sta: 0'
- [ 32.881599] ath10k_pci 0000:00:00.0: wmi print 'alloc rem: 20984 iram: 25656'
- [ 32.946480] ath10k_pci 0000:00:00.0: pdev param 0 not supported by firmware
- [ 32.961434] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 32.986159] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
- [ 33.024248] br-lan: port 2(wlan0) entered blocking state
- [ 33.029830] br-lan: port 2(wlan0) entered disabled state
- [ 33.035696] device wlan0 entered promiscuous mode
- [ 33.044699] br-lan: port 3(wlan1) entered blocking state
- [ 33.050315] br-lan: port 3(wlan1) entered disabled state
- [ 33.056129] device wlan1 entered promiscuous mode
- [ 33.875473] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
- [ 33.882754] br-lan: port 3(wlan1) entered blocking state
- [ 33.888307] br-lan: port 3(wlan1) entered forwarding state
- [ 34.245351] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 34.252092] br-lan: port 2(wlan0) entered blocking state
- [ 34.257652] br-lan: port 2(wlan0) entered forwarding state
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement