API tools faq
paste
Advertisement
armoon

yocto bootlog mainline

armoon
Mar 19th, 2023
33
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 33.79 KB | None | 0 0
raw download clone embed print report
  1. U-Boot TPL 2023.01-rc3 (Dec 14 2022 - 17:36:41)
  2. Trying to boot from BOOTROM
  3. Returning to boot ROM...
  4.  
  5. U-Boot SPL 2023.01-rc3 (Dec 14 2022 - 17:36:41 +0000)
  6. Trying to boot from MMC2
  7. I/TC:
  8. I/TC: cpu feature:0x0
  9. I/TC: cpu_st=0xe0
  10. I/TC: OP-TEE version: 3.6.0-300-g380b79bf #35 Sat Oct 17 03:53:58 UTC 2020 arm
  11. I/TC: Next entry point address: 0x00600000
  12. I/TC: Initialized
  13.  
  14.  
  15. U-Boot 2023.01-rc3 (Dec 14 2022 - 17:36:41 +0000)
  16.  
  17. Model: Edgeble Neu2 IO Board
  18. DRAM: 2 GiB
  19. PMIC: RK8090 (on=0x80, off=0x08)
  20. Core: 98 devices, 19 uclasses, devicetree: separate
  21. MMC: mmc@ffc50000: 0, mmc@ffc60000: 1
  22. Loading Environment from MMC... *** Warning - bad CRC, using default environment
  23.  
  24. In: serial@ff570000
  25. Out: serial@ff570000
  26. Err: serial@ff570000
  27. Model: Edgeble Neu2 IO Board
  28. Net: No ethernet found.
  29. Hit any key to stop autoboot: 0
  30. switch to partitions #0, OK
  31. mmc0(part 0) is current device
  32. switch to partitions #0, OK
  33. mmc1 is current device
  34. Scanning mmc 1:6...
  35. Found /extlinux/extlinux.conf
  36. Retrieving file: /extlinux/extlinux.conf
  37. 1: Yocto
  38. Retrieving file: /zImage
  39. append: root=PARTUUID=57cbcefc-5669-4078-a73b-3d0b2251c839 rootwait console=tty1 console=ttyS2,115200n8 rw rootfstype=ext4 init=/sbin/init
  40. Retrieving file: /rv1126-edgeble-neu2-io.dtb
  41. Kernel image @ 0x2008000 [ 0x000000 - 0xaa5200 ]
  42. ## Flattened Device Tree blob at 08300000
  43. Booting using the fdt blob at 0x8300000
  44. Working FDT set to 8300000
  45. Loading Device Tree to 0fff8000, end 0ffff744 ... OK
  46. Working FDT set to fff8000
  47.  
  48. Starting kernel ...
  49.  
  50. [ 0.000000] Booting Linux on physical CPU 0xf00
  51. [ 0.000000] Linux version 6.3.0-rc2-yocto-standard-00405-ga3671bd86a97 (oe-user@oe-host) (arm-oe-linux-gnueabi-gcc (GCC) 11.3.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP Sat Mar 18 23:01:34 UTC 2023
  52. [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
  53. [ 0.000000] CPU: div instructions available: patching division code
  54. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  55. [ 0.000000] OF: fdt: Machine model: Edgeble Neu2 IO Board
  56. [ 0.000000] Memory policy: Data cache writealloc
  57. [ 0.000000] efi: UEFI not found.
  58. [ 0.000000] cma: Reserved 64 MiB at 0x7c000000
  59. [ 0.000000] Zone ranges:
  60. [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff]
  61. [ 0.000000] Normal empty
  62. [ 0.000000] HighMem [mem 0x0000000030000000-0x000000007fffffff]
  63. [ 0.000000] Movable zone start for each node
  64. [ 0.000000] Early memory node ranges
  65. [ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff]
  66. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff]
  67. [ 0.000000] psci: probing for conduit method from DT.
  68. [ 0.000000] psci: PSCIv1.0 detected in firmware.
  69. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  70. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  71. [ 0.000000] psci: SMC Calling Convention v1.0
  72. [ 0.000000] percpu: Embedded 16 pages/cpu s35732 r8192 d21612 u65536
  73. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522752
  74. [ 0.000000] Kernel command line: root=PARTUUID=57cbcefc-5669-4078-a73b-3d0b2251c839 rootwait console=tty1 console=ttyS2,115200n8 rw rootfstype=ext4 init=/sbin/init
  75. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
  76. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
  77. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  78. [ 0.000000] Memory: 1986468K/2097152K available (15360K kernel code, 2614K rwdata, 6444K rodata, 2048K init, 422K bss, 45148K reserved, 65536K cma-reserved, 1245184K highmem)
  79. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  80. [ 0.000000] trace event string verifier disabled
  81. [ 0.000000] rcu: Hierarchical RCU implementation.
  82. [ 0.000000] rcu: RCU event tracing is enabled.
  83. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4.
  84. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
  85. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  86. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  87. [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
  88. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt).
  89. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  90. [ 0.000002] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  91. [ 0.000019] Switching to timer-based delay loop, resolution 41ns
  92. [ 0.001464] Failed to get pclk for 'rk_timer'
  93. [ 0.002867] Console: colour dummy device 80x30
  94. [ 0.002885] printk: console [tty1] enabled
  95. [ 0.003507] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
  96. [ 0.003552] pid_max: default: 32768 minimum: 301
  97. [ 0.003725] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
  98. [ 0.003770] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
  99. [ 0.004521] CPU: Testing write buffer coherency: ok
  100. [ 0.004957] /cpus/cpu@f00 missing clock-frequency property
  101. [ 0.005016] /cpus/cpu@f01 missing clock-frequency property
  102. [ 0.005059] /cpus/cpu@f02 missing clock-frequency property
  103. [ 0.005101] /cpus/cpu@f03 missing clock-frequency property
  104. [ 0.005135] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00
  105. [ 0.006118] Setting up static identity map for 0x300000 - 0x3000ac
  106. [ 0.006994] rcu: Hierarchical SRCU implementation.
  107. [ 0.007023] rcu: Max phase no-delay instances is 1000.
  108. [ 0.008955] EFI services will not be available.
  109. [ 0.009373] smp: Bringing up secondary CPUs ...
  110. [ 0.010430] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01
  111. [ 0.011510] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02
  112. [ 0.012511] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03
  113. [ 0.012628] smp: Brought up 1 node, 4 CPUs
  114. [ 0.012711] SMP: Total of 4 processors activated (192.00 BogoMIPS).
  115. [ 0.012736] CPU: All CPU(s) started in SVC mode.
  116. [ 0.013502] devtmpfs: initialized
  117. [ 0.018417] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
  118. [ 0.018706] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  119. [ 0.018760] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
  120. [ 0.021417] pinctrl core: initialized pinctrl subsystem
  121. [ 0.024018] DMI not present or invalid.
  122. [ 0.025086] NET: Registered PF_NETLINK/PF_ROUTE protocol family
  123. [ 0.027248] DMA: preallocated 256 KiB pool for atomic coherent allocations
  124. [ 0.029836] thermal_sys: Registered thermal governor 'step_wise'
  125. [ 0.029934] cpuidle: using governor menu
  126. [ 0.030360] No ATAGs?
  127. [ 0.030537] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  128. [ 0.030577] hw-breakpoint: maximum watchpoint size is 8 bytes.
  129. [ 0.033102] Serial: AMBA PL011 UART driver
  130. [ 0.038927] rockchip-pm-domain ff3e0000.power-management:power-controller: power-domain: failed to get clk at index 0: -517
  131. [ 0.038986] rockchip-pm-domain ff3e0000.power-management:power-controller: failed to handle node power-domain: -517
  132. [ 0.066822] iommu: Default domain type: Translated
  133. [ 0.066870] iommu: DMA domain TLB invalidation policy: strict mode
  134. [ 0.067714] SCSI subsystem initialized
  135. [ 0.068372] usbcore: registered new interface driver usbfs
  136. [ 0.068440] usbcore: registered new interface driver hub
  137. [ 0.068508] usbcore: registered new device driver usb
  138. [ 0.069845] pps_core: LinuxPPS API ver. 1 registered
  139. [ 0.069875] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  140. [ 0.069921] PTP clock support registered
  141. [ 0.070120] EDAC MC: Ver: 3.0.0
  142. [ 0.071076] scmi_core: SCMI protocol bus registered
  143. [ 0.073754] vgaarb: loaded
  144. [ 1.375644] clocksource: Switched to clocksource arch_sys_counter
  145. [ 1.393748] NET: Registered PF_INET protocol family
  146. [ 1.394117] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
  147. [ 1.396997] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
  148. [ 1.397080] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
  149. [ 1.397125] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
  150. [ 1.397235] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear)
  151. [ 1.397520] TCP: Hash tables configured (established 8192 bind 8192)
  152. [ 1.397684] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
  153. [ 1.397772] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
  154. [ 1.398039] NET: Registered PF_UNIX/PF_LOCAL protocol family
  155. [ 1.398935] RPC: Registered named UNIX socket transport module.
  156. [ 1.398982] RPC: Registered udp transport module.
  157. [ 1.399003] RPC: Registered tcp transport module.
  158. [ 1.399022] RPC: Registered tcp NFSv4.1 backchannel transport module.
  159. [ 1.400985] PCI: CLS 0 bytes, default 64
  160. [ 1.428808] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
  161. [ 1.430588] Initialise system trusted keyrings
  162. [ 1.430965] workingset: timestamp_bits=30 max_order=19 bucket_order=0
  163. [ 1.431396] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  164. [ 1.431779] NFS: Registering the id_resolver key type
  165. [ 1.431851] Key type id_resolver registered
  166. [ 1.431875] Key type id_legacy registered
  167. [ 1.431924] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  168. [ 1.431952] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
  169. [ 1.432011] ntfs: driver 2.1.32 [Flags: R/O].
  170. [ 1.432434] Key type asymmetric registered
  171. [ 1.432466] Asymmetric key parser 'x509' registered
  172. [ 1.432597] bounce: pool size: 64 pages
  173. [ 1.432674] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
  174. [ 1.432706] io scheduler mq-deadline registered
  175. [ 1.432728] io scheduler kyber registered
  176. [ 1.432769] io scheduler bfq registered
  177. [ 1.476902] dma-pl330 ff4e0000.dma-controller: Loaded driver for PL330 DMAC-241330
  178. [ 1.476964] dma-pl330 ff4e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
  179. [ 1.556171] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled
  180. [ 1.560106] ff560000.serial: ttyS0 at MMIO 0xff560000 (irq = 35, base_baud = 1500000) is a 16550A
  181. [ 1.560378] serial serial0: tty port ttyS0 registered
  182. [ 1.561501] ff570000.serial: ttyS2 at MMIO 0xff570000 (irq = 36, base_baud = 1500000) is a 16550A
  183. [ 1.561785] printk: console [ttyS2] enabled
  184. [ 2.466652] SuperH (H)SCI(F) driver initialized
  185. [ 2.472581] msm_serial: driver initialized
  186. [ 2.477226] STMicroelectronics ASC driver initialized
  187. [ 2.483788] STM32 USART driver initialized
  188. [ 2.506147] brd: module loaded
  189. [ 2.516985] loop: module loaded
  190. [ 2.532724] CAN device driver interface
  191. [ 2.538054] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded
  192. [ 2.545306] e1000e: Intel(R) PRO/1000 Network Driver
  193. [ 2.550905] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  194. [ 2.557599] igb: Intel(R) Gigabit Ethernet Network Driver
  195. [ 2.563653] igb: Copyright (c) 2007-2014 Intel Corporation.
  196. [ 2.573750] pegasus: Pegasus/Pegasus II USB Ethernet driver
  197. [ 2.580114] usbcore: registered new interface driver pegasus
  198. [ 2.586530] usbcore: registered new interface driver asix
  199. [ 2.592617] usbcore: registered new interface driver ax88179_178a
  200. [ 2.599501] usbcore: registered new interface driver cdc_ether
  201. [ 2.606095] usbcore: registered new interface driver smsc75xx
  202. [ 2.612570] usbcore: registered new interface driver smsc95xx
  203. [ 2.619074] usbcore: registered new interface driver net1080
  204. [ 2.625454] usbcore: registered new interface driver cdc_subset
  205. [ 2.632145] usbcore: registered new interface driver zaurus
  206. [ 2.638484] usbcore: registered new interface driver cdc_ncm
  207. [ 2.648621] usbcore: registered new interface driver usb-storage
  208. [ 2.660044] i2c_dev: i2c /dev entries driver
  209. [ 2.667384] dw-apb-uart ff560000.serial: Failed to create device link (0x180) with 0-0020
  210. [ 2.676705] i2c 0-0020: Fixed dependency cycle(s) with /i2c@ff3f0000/pmic@20/regulators/DCDC_REG4
  211. [ 2.686703] i2c 0-0020: Fixed dependency cycle(s) with /i2c@ff3f0000/pmic@20/regulators/DCDC_REG5
  212. [ 2.710312] sdhci: Secure Digital Host Controller Interface driver
  213. [ 2.717317] sdhci: Copyright(c) Pierre Ossman
  214. [ 2.723901] Synopsys Designware Multimedia Card Interface Driver
  215. [ 2.732221] sdhci-pltfm: SDHCI platform and OF driver helper
  216. [ 2.741683] ledtrig-cpu: registered to indicate activity on CPUs
  217. [ 2.750351] usbcore: registered new interface driver usbhid
  218. [ 2.756665] usbhid: USB HID core driver
  219. [ 2.766844] NET: Registered PF_INET6 protocol family
  220. [ 2.773801] Segment Routing with IPv6
  221. [ 2.778070] In-situ OAM (IOAM) with IPv6
  222. [ 2.782560] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  223. [ 2.790002] NET: Registered PF_PACKET protocol family
  224. [ 2.795729] can: controller area network core
  225. [ 2.800662] NET: Registered PF_CAN protocol family
  226. [ 2.806063] can: raw protocol
  227. [ 2.809395] can: broadcast manager protocol
  228. [ 2.814092] can: netlink gateway - max_hops=1
  229. [ 2.819469] Key type dns_resolver registered
  230. [ 2.824419] ThumbEE CPU extension supported.
  231. [ 2.829265] Registering SWP/SWPB emulation handler
  232. [ 2.847023] Loading compiled-in X.509 certificates
  233. [ 2.883956] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation.
  234. [ 2.894516] rockchip-gpio ff460000.gpio: probed /pinctrl/gpio@ff460000
  235. [ 2.902360] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation.
  236. [ 2.912678] rockchip-gpio ff620000.gpio: probed /pinctrl/gpio@ff620000
  237. [ 2.920430] gpio gpiochip2: Static allocation of GPIO base is deprecated, use dynamic allocation.
  238. [ 2.930681] rockchip-gpio ff630000.gpio: probed /pinctrl/gpio@ff630000
  239. [ 2.938385] gpio gpiochip3: Static allocation of GPIO base is deprecated, use dynamic allocation.
  240. [ 2.948604] rockchip-gpio ff640000.gpio: probed /pinctrl/gpio@ff640000
  241. [ 2.955992] dw-apb-uart ff560000.serial: Failed to create device link (0x180) with ff640000.gpio
  242. [ 2.966225] gpio gpiochip4: Static allocation of GPIO base is deprecated, use dynamic allocation.
  243. [ 2.976461] rockchip-gpio ff650000.gpio: probed /pinctrl/gpio@ff650000
  244. [ 2.988581] rk808 0-0020: chip id: 0x8090
  245. [ 3.007881] rk808-regulator rk808-regulator.1.auto: there is no dvs0 gpio
  246. [ 3.015540] rk808-regulator rk808-regulator.1.auto: there is no dvs1 gpio
  247. [ 3.037581] vcc_dvdd: Bringing 1100000uV into 1200000-1200000uV
  248. [ 3.055525] rk808-rtc rk808-rtc.3.auto: registered as rtc0
  249. [ 3.062573] rk808-rtc rk808-rtc.3.auto: setting system clock to 2017-08-05T09:29:57 UTC (1501925397)
  250. [ 3.074695] dw-apb-uart ff560000.serial: Failed to create device link (0x180) with 0-0020
  251. [ 3.097923] dwmmc_rockchip ffc60000.mmc: IDMAC supports 32-bit address mode.
  252. [ 3.101789] dwmmc_rockchip ffc70000.mmc: IDMAC supports 32-bit address mode.
  253. [ 3.113981] dwmmc_rockchip ffc60000.mmc: Using internal DMA controller.
  254. [ 3.121489] dwmmc_rockchip ffc60000.mmc: Version ID is 270a
  255. [ 3.123447] rk_gmac-dwmac ffc40000.ethernet: IRQ eth_lpi not found
  256. [ 3.127832] dwmmc_rockchip ffc60000.mmc: DW MMC controller at irq 68,32 bit host data width,256 deep fifo
  257. [ 3.135254] rk_gmac-dwmac ffc40000.ethernet: clock input or output? (input).
  258. [ 3.145776] dwmmc_rockchip ffc70000.mmc: Using internal DMA controller.
  259. [ 3.153315] rk_gmac-dwmac ffc40000.ethernet: TX delay(0x2a).
  260. [ 3.160758] dwmmc_rockchip ffc70000.mmc: Version ID is 270a
  261. [ 3.167065] rk_gmac-dwmac ffc40000.ethernet: RX delay(0x1a).
  262. [ 3.173326] dwmmc_rockchip ffc70000.mmc: DW MMC controller at irq 70,32 bit host data width,256 deep fifo
  263. [ 3.173337] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  264. [ 3.179627] rk_gmac-dwmac ffc40000.ethernet: integrated PHY? (no).
  265. [ 3.191137] dwmmc_rockchip ffc70000.mmc: allocated mmc-pwrseq
  266. [ 3.200686] rk_gmac-dwmac ffc40000.ethernet: clock input from PHY
  267. [ 3.207584] mmc_host mmc2: card is non-removable.
  268. [ 3.219008] rk_gmac-dwmac ffc40000.ethernet: init for RGMII
  269. [ 3.232880] rk_gmac-dwmac ffc40000.ethernet: User ID: 0x30, Synopsys ID: 0x51
  270. [ 3.234424] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  271. [ 3.240905] rk_gmac-dwmac ffc40000.ethernet: DWMAC4/5
  272. [ 3.240917] rk_gmac-dwmac ffc40000.ethernet: DMA HW capability register supported
  273. [ 3.265415] rk_gmac-dwmac ffc40000.ethernet: RX Checksum Offload Engine supported
  274. [ 3.273821] rk_gmac-dwmac ffc40000.ethernet: TX Checksum insertion supported
  275. [ 3.281735] rk_gmac-dwmac ffc40000.ethernet: Wake-Up On Lan supported
  276. [ 3.289053] rk_gmac-dwmac ffc40000.ethernet: TSO supported
  277. [ 3.292099] mmc_host mmc1: Bus speed (slot 0) = 198000000Hz (slot req 200000000Hz, actual 198000000HZ div = 0)
  278. [ 3.295192] rk_gmac-dwmac ffc40000.ethernet: Enable RX Mitigation via HW Watchdog Timer
  279. [ 3.305649] mmc2: queuing unknown CIS tuple 0x01 [d9 01 ff] (3 bytes)
  280. [ 3.313188] mmc2: queuing unknown CIS tuple 0x1a [01 01 00 02 07] (5 bytes)
  281. [ 3.315372] rk_gmac-dwmac ffc40000.ethernet: device MAC address 66:d3:db:38:c9:33
  282. [ 3.325837] mmc2: queuing unknown CIS tuple 0x1b [c1 41 30 30 ff ff 32 00] (8 bytes)
  283. [ 3.330349] rk_gmac-dwmac ffc40000.ethernet: Enabled RFS Flow TC (entries=10)
  284. [ 3.339391] mmc2: queuing unknown CIS tuple 0x14 [] (0 bytes)
  285. [ 3.347393] rk_gmac-dwmac ffc40000.ethernet: TSO feature enabled
  286. [ 3.347404] rk_gmac-dwmac ffc40000.ethernet: Using 32 bits DMA width
  287. [ 3.357071] mmc_host mmc2: Bus speed (slot 0) = 99000000Hz (slot req 100000000Hz, actual 99000000HZ div = 0)
  288. [ 3.562329] dwmmc_rockchip ffc70000.mmc: Successfully tuned phase to 200
  289. [ 3.570480] mmc2: new ultra high speed SDR104 SDIO card at address 0001
  290. [ 3.654098] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  291. [ 3.656278] dwmmc_rockchip ffc50000.mmc: IDMAC supports 32-bit address mode.
  292. [ 3.666562] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  293. [ 3.678080] dwmmc_rockchip ffc50000.mmc: Using internal DMA controller.
  294. [ 3.678091] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
  295. [ 3.678108] cfg80211: failed to load regulatory.db
  296. [0[ 3.700743] dw-apb-uart ff570000.serial: forbid DMA for kernel console
  297. [ 3.708182] dwmmc_rockchip ffc50000.mmc: DW MMC controller at irq 73,32 bit host data width,256 deep fifo
  298. [ 3.718494] dwmmc_rockchip ffc60000.mmc: Successfully tuned phase to 91
  299. [ 3.719799] mmc_host mmc0: card is non-removable.
  300. [ 3.726326] mmc1: new ultra high speed SDR104 SDHC card at address aaaa
  301. [ 3.740084] mmcblk1: mmc1:aaaa SL16G 14.8 GiB
  302. [ 3.744487] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  303. [ 3.755248] GPT:Primary header thinks Alt. header is not at the end of the disk.
  304. [ 3.763760] GPT:1299805 != 31116287
  305. [ 3.767710] GPT:Alternate GPT header not at the end of the disk.
  306. [ 3.774443] GPT:1299805 != 31116287
  307. [ 3.778374] GPT: Use GNU Parted to correct GPT errors.
  308. [ 3.784190] mmcblk1: p1 p2 p3 p4 p5 p6 p7
  309. [ 3.801272] EXT4-fs (mmcblk1p7): mounted filesystem f179e34c-700e-4690-926d-deec7b6713fc with ordered data mode. Quota mode: disabled.
  310. [ 3.814955] VFS: Mounted root (ext4 filesystem) on device 179:7.
  311. [ 3.826338] devtmpfs: mounted
  312. [ 3.833080] Freeing unused kernel image (initmem) memory: 2048K
  313. [ 3.840168] Run /sbin/init as init process
  314. [ 3.874689] mmc_host mmc0: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
  315. [ 3.887048] mmc0: new MMC card at address 0001
  316. [ 3.893178] mmcblk0: mmc0:0001 SOD16G 14.6 GiB
  317. [ 3.904989] mmcblk0: p1
  318. [ 3.908965] mmcblk0boot0: mmc0:0001 SOD16G 4.00 MiB
  319. [ 3.916992] mmcblk0boot1: mmc0:0001 SOD16G 4.00 MiB
  320. [ 3.924626] mmcblk0rpmb: mmc0:0001 SOD16G 4.00 MiB, chardev (236:0)
  321. [ 3.988289] systemd[1]: System time before build time, advancing clock.
  322. [ 4.017260] systemd[1]: systemd 250.5+ running in system mode (-PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid)
  323. [ 4.053266] systemd[1]: Detected architecture arm.
  324.  
  325. Welcome to OpenEmbedded nodistro.0!
  326.  
  327. [ 4.099664] systemd[1]: Hostname set to <neu2-io>.
  328. [ 4.107549] systemd[1]: Initializing machine ID from random generator.
  329. [ 4.281332] block mmcblk1: the capability attribute has been deprecated.
  330. [ 4.997193] systemd[1]: Queued start job for default target Multi-User System.
  331. [ 5.009316] systemd[1]: Created slice Slice /system/getty.
  332. [ OK ] Created slice Slice /system/getty.
  333. [ 5.047289] systemd[1]: Created slice Slice /system/modprobe.
  334. [ OK ] Created slice Slice /system/modprobe.
  335. [ 5.087224] systemd[1]: Created slice Slice /system/serial-getty.
  336. [ OK ] Created slice Slice /system/serial-getty.
  337. [ 5.126514] systemd[1]: Created slice User and Session Slice.
  338. [ OK ] Created slice User and Session Slice.
  339. [ 5.166167] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  340. [ OK ] Started Dispatch Password …ts to Console Directory Watch.
  341. [ 5.206113] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  342. [ OK ] Started Forward Password R…uests to Wall Directory Watch.
  343. [ 5.246395] systemd[1]: Reached target Path Units.
  344. [ OK ] Reached target Path Units.
  345. [ 5.275921] systemd[1]: Reached target Remote File Systems.
  346. [ OK ] Reached target Remote File Systems.
  347. [ 5.315842] systemd[1]: Reached target Slice Units.
  348. [ OK ] Reached target Slice Units.
  349. [ 5.345934] systemd[1]: Reached target Swaps.
  350. [ OK ] Reached target Swaps.
  351. [ 5.382067] systemd[1]: Listening on RPCbind Server Activation Socket.
  352. [ OK ] Listening on RPCbind Server Activation Socket.
  353. [ 5.425931] systemd[1]: Reached target RPC Port Mapper.
  354. [ OK ] Reached target RPC Port Mapper.
  355. [ 5.469930] systemd[1]: Listening on Syslog Socket.
  356. [ OK ] Listening on Syslog Socket.
  357. [ 5.506322] systemd[1]: Listening on initctl Compatibility Named Pipe.
  358. [ OK ] Listening on initctl Compatibility Named Pipe.
  359. [ 5.573159] systemd[1]: Journal Audit Socket was skipped because of a failed condition check (ConditionSecurity=audit).
  360. [ 5.586394] systemd[1]: Listening on Journal Socket (/dev/log).
  361. [ OK ] Listening on Journal Socket (/dev/log).
  362. [ 5.626706] systemd[1]: Listening on Journal Socket.
  363. [ OK ] Listening on Journal Socket.
  364. [ 5.656903] systemd[1]: Listening on Network Service Netlink Socket.
  365. [ OK ] Listening on Network Service Netlink Socket.
  366. [ 5.700109] systemd[1]: Listening on udev Control Socket.
  367. [ OK ] Listening on udev Control Socket.
  368. [ 5.736481] systemd[1]: Listening on udev Kernel Socket.
  369. [ OK ] Listening on udev Kernel Socket.
  370. [ 5.776608] systemd[1]: Listening on User Database Manager Socket.
  371. [ OK ] Listening on User Database Manager Socket.
  372. [ 5.816478] systemd[1]: Huge Pages File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/mm/hugepages).
  373. [ 5.831471] systemd[1]: POSIX Message Queue File System was skipped because of a failed condition check (ConditionPathExists=/proc/sys/fs/mqueue).
  374. [ 5.886162] systemd[1]: Mounting Kernel Debug File System...
  375. Mounting Kernel Debug File System...
  376. [ 5.919665] systemd[1]: Mounting Kernel Trace File System...
  377. Mounting Kernel Trace File System...
  378. [ 5.963534] systemd[1]: Mounting Temporary Directory /tmp...
  379. Mounting Temporary Directory /tmp...
  380. [ 6.001582] systemd[1]: Starting Create List of Static Device Nodes...
  381. Starting Create List of Static Device Nodes...
  382. [ 6.050920] systemd[1]: Starting Load Kernel Module configfs...
  383. Starting Load Kernel Module configfs...
  384. [ 6.090739] systemd[1]: Starting Load Kernel Module drm...
  385. Starting Load Kernel Module drm...
  386. [ 6.130908] systemd[1]: Starting Load Kernel Module fuse...
  387. Starting Load Kernel Module fuse...
  388. [ 6.174517] systemd[1]: Starting RPC Bind...
  389. Starting RPC Bind...
  390. [ 6.206110] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/).
  391. [ 6.221581] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
  392. [ 6.236073] systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
  393. [ 6.248925] systemd[1]: Starting Journal Service...
  394. Starting Journal Service...
  395. [ 6.281475] systemd[1]: Load Kernel Modules was skipped because all trigger condition checks failed.
  396. [ 6.295740] systemd[1]: Mounting NFSD configuration filesystem...
  397. Mounting NFSD configuration filesystem...
  398. [ 6.340402] systemd[1]: Starting Generate network units from Kernel command line...
  399. Starting Generate network …ts from Kernel command line...
  400. [ 6.390584] systemd[1]: Starting Remount Root and Kernel File Systems...
  401. Starting Remount Root and Kernel File Systems...
  402. [ 6.421585] EXT4-fs (mmcblk1p7): re-mounted f179e34c-700e-4690-926d-deec7b6713fc. Quota mode: disabled.
  403. [ 6.437263] systemd[1]: Starting Apply Kernel Variables...
  404. Starting Apply Kernel Variables...
  405. [ 6.470606] systemd[1]: Starting Coldplug All udev Devices...
  406. Starting Coldplug All udev Devices...
  407. [ 6.516417] systemd[1]: Started RPC Bind.
  408. [ OK ] Started RPC Bind.
  409. [ 6.546504] systemd[1]: Started Journal Service.
  410. [ OK ] Started Journal Service.
  411. [ OK ] Mounted Kernel Debug File System.
  412. [ OK ] Mounted Kernel Trace File System.
  413. [ OK ] Mounted Temporary Directory /tmp.
  414. [ OK ] Finished Create List of Static Device Nodes.
  415. [ OK ] Finished Load Kernel Module configfs.
  416. [ OK ] Finished Load Kernel Module drm.
  417. [ OK ] Finished Load Kernel Module fuse.
  418. [FAILED] Failed to mount NFSD configuration filesystem.
  419. See 'systemctl status proc-fs-nfsd.mount' for details.
  420. [DEPEND] Dependency failed for NFS Mount Daemon.
  421. [DEPEND] Dependency failed for NFS server and services.
  422. [ OK ] Finished Generate network units from Kernel command line.
  423. [ OK ] Finished Remount Root and Kernel File Systems.
  424. [ OK ] Finished Apply Kernel Variables.
  425. Mounting Kernel Configuration File System...
  426. Starting Flush Journal to Persistent Storage...
  427. [ 7.139750] systemd-journald[95]: Received client request to flush runtime journal.
  428. Starting Create System Users...
  429. [ OK ] Mounted Kernel Configuration File System.
  430. [ OK ] Finished Flush Journal to Persistent Storage.
  431. [ OK ] Finished Create System Users.
  432. Starting Create Static Device Nodes in /dev...
  433. [ OK ] Finished Create Static Device Nodes in /dev.
  434. [ OK ] Reached target Preparation for Local File Systems.
  435. Mounting /var/volatile...
  436. Starting Rule-based Manage…for Device Events and Files...
  437. [ OK ] Mounted /var/volatile.
  438. Starting Load/Save Random Seed...
  439. [ OK ] Reached target Local File Systems.
  440. Starting Rebuild Dynamic Linker Cache...
  441. Starting Create Volatile Files and Directories...
  442. [ OK ] Started Rule-based Manager for Device Events and Files.
  443. [ OK ] Finished Create Volatile Files and Directories.
  444. Starting Rebuild Journal Catalog...
  445. Starting Network Time Synchronization...
  446. Starting Record System Boot/Shutdown in UTMP...
  447. [ OK ] Finished Coldplug All udev Devices.
  448. [ OK ] Finished Rebuild Dynamic Linker Cache.
  449. [ OK ] Finished Rebuild Journal Catalog.
  450. Starting Update is Completed...
  451. [ OK ] Finished Record System Boot/Shutdown in UTMP.
  452. [ OK ] Finished Update is Completed.
  453. [ OK ] Started Network Time Synchronization.
  454. [ OK ] Reached target System Initialization.
  455. [ OK ] Started Daily Cleanup of Temporary Directories.
  456. [ OK ] Reached target System Time Set.
  457. [ OK ] Started Daily rotation of log files.
  458. [ OK ] Reached target Timer Units.
  459. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
  460. [ OK ] Listening on D-Bus System Message Bus Socket.
  461. Starting sshd.socket...
  462. [ OK ] Listening on sshd.socket.
  463. [ 9.137011] Bluetooth: Core ver 2.22
  464. [ 9.141157] NET: Registered PF_BLUETOOTH protocol family
  465. [ 9.147311] Bluetooth: HCI device and connection manager initialized
  466. [ 9.154474] Bluetooth: HCI socket layer initialized
  467. [ 9.160143] Bluetooth: L2CAP socket layer initialized
  468. [ 9.165930] Bluetooth: SCO socket layer initialized
  469. [ 9.270151] Bluetooth: HCI UART driver ver 2.3
  470. [ 9.275245] Bluetooth: HCI UART protocol H4 registered
  471. [ 9.281695] Bluetooth: HCI UART protocol Broadcom registered
  472. [ 9.288285] Bluetooth: HCI UART protocol QCA registered
  473. [ 9.301592] ath10k_sdio mmc2:0001:1: qca9377 hw1.1 sdio target 0x05020001 chip_id 0x00000000 sub 0000:0000
  474. [ 9.312569] ath10k_sdio mmc2:0001:1: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
  475. [ 9.325515] ath10k_sdio mmc2:0001:1: firmware ver WLAN.TF.1.1.1-00061-QCATFSWPZ-1 api 5 features ignore-otp crc32 7746e551
  476. [ 9.340079] Bluetooth: hci0: setting up ROME/QCA6390
  477. [ 9.571014] Bluetooth: hci0: Frame reassembly failed (-84)
  478. [ 9.617183] ath10k_sdio mmc2:0001:1: failed to fetch board data for bus=sdio,vendor=0271,device=0701,subsystem-vendor=0000,subsystem-device=0000 from ath10k/QCA9377/hw1.0/board-2.bin
  479. [ 9.640731] ath10k_sdio mmc2:0001:1: board_file api 1 bmi_id N/A crc32 544289f7
  480. [ 9.886161] Bluetooth: hci0: QCA Product ID :0x00000008
  481. [ 9.892264] Bluetooth: hci0: QCA SOC Version :0x00000023
  482. [ 9.898447] Bluetooth: hci0: QCA ROM Version :0x00000302
  483. [ 9.904521] Bluetooth: hci0: QCA Patch Version:0x00000111
  484. [ 9.910651] Bluetooth: hci0: QCA controller version 0x00230302
  485. [ 9.917256] Bluetooth: hci0: QCA Downloading qca/rampatch_00230302.bin
  486. [ 10.275618] Bluetooth: hci0: QCA Downloading qca/nvm_00230302.bin
  487. [ 10.355174] Bluetooth: hci0: QCA setup on UART is completed
  488. [ 10.517643] Bluetooth: hci0: Frame reassembly failed (-84)
  489. [ 10.523856] Bluetooth: hci0: Frame reassembly failed (-84)
  490. [*** ] A start job is running for Load/Save Random Seed (6s / 10min 2s)
  491. [ OK ] Reached target Socket Units.
  492. [ OK ] Reached target Basic System.
  493. [ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch.
  494. [ OK ] Started Job spooling tools.
  495. Starting Bluetooth service...
  496. [ OK ] Started Periodic Command Scheduler Bluetooth: hci0: Opcode 0x c03 failed: -110
  497. [0m.
  498. Starting D-Bus System Message Bus...
  499. [ OK ] Started A minimalistic net…Pv4, rdisc and DHCPv6 support.
  500. [ OK ] Started Getty on tty1.
  501. Starting IPv6 Packet Filtering Framework...
  502. Starting IPv4 Packet Filtering Framework...
  503. [ OK ] Started Serial Getty on ttyS2.
  504. [ OK ] Reached target Login Prompts.
  505. [ OK ] Started System Logging Service.
  506. Starting User Login Management...
  507. Starting OpenSSH Key Generation...
  508. [ OK ] Started D-Bus System Message Bus.
  509. [ OK ] Finished Load/Save Random Seed.
  510. [ OK ] Finished IPv6 Packet Filtering Framework.
  511. [ OK ] Finished IPv4 Packet Filtering Framework.
  512. [ OK ] Reached target Preparation for Network.
  513. Starting Network Configuration...
  514. Starting Load/Save RF Kill Switch Status...
  515. [ OK ] Started Load/Save RF Kill Switch Status.
  516. [ OK ] Started Bluetooth service.
  517. [ OK ] Started User Login Management.
  518. [ OK ] Reached target Bluetooth Support.
  519. Starting Hostname Service...
  520. [ OK ] Started Network Configuration.
  521. Starting Network Name Resolution...
  522. [ OK ] Started Hostname Service.
  523. [ OK ] Started Network Name Resolution.
  524. [ OK ] Reached target Network.
  525. [ OK ] Reached target Host and Network Name Lookups.
  526. Starting Avahi mDNS/DNS-SD Stack...
  527. [ OK ] Started NFS status monitor for NFSv2/3 locking..
  528. [ OK ] Started Respond to IPv6 Node Information Queries.
  529. [ OK ] Started Network Router Discovery Daemon.
  530.  
  531. OpenEmbedded nodistro.0 neu2-io ttyS2
  532.  
  533. neu2-io login: root
  534. root@neu2-io:~# ifconfig -a
  535. eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
  536. inet 10.0.0.15 netmask 255.255.255.0 broadcast 10.0.0.255
  537. inet6 fe80::e09d:fa4:8e95:7ec2 prefixlen 64 scopeid 0x20<link>
  538. ether 66:9b:01:25:32:94 txqueuelen 1000 (Ethernet)
  539. RX packets 15 bytes 3424 (3.3 KiB)
  540. RX errors 0 dropped 0 overruns 0 frame 0
  541. TX packets 44 bytes 5736 (5.6 KiB)
  542. TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
  543. device interrupt 71
  544.  
  545. lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
  546. inet 127.0.0.1 netmask 255.0.0.0
  547. inet6 ::1 prefixlen 128 scopeid 0x10<host>
  548. loop txqueuelen 1000 (Local Loopback)
  549. RX packets 90 bytes 7716 (7.5 KiB)
  550. RX errors 0 dropped 0 overruns 0 frame 0
  551. TX packets 90 bytes 7716 (7.5 KiB)
  552. TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
  553.  
  554. sit0: flags=128<NOARP> mtu 1480
  555. unspec 00-00-00-00-02-00-BC-94-00-00-00-00-00-00-00-00 txqueuelen 1000 (UNSPEC)
  556. RX packets 0 bytes 0 (0.0 B)
  557. RX errors 0 dropped 0 overruns 0 frame 0
  558. TX packets 0 bytes 0 (0.0 B)
  559. TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
  560.  
  561. wlan0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
  562. ether b8:4d:43:38:7c:c5 txqueuelen 1000 (Ethernet)
  563. RX packets 0 bytes 0 (0.0 B)
  564. RX errors 0 dropped 0 overruns 0 frame 0
  565. TX packets 0 bytes 0 (0.0 B)
  566. TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
  567.  
  568. root@neu2-io:~#
  569.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!