Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- U-Boot SPL 2021.04-lf_v2021.04+g8372631b28 (Jun 10 2022 - 06:24:02 +0000)
- PMIC: PFUZE100 ID=0x10
- DDRINFO: start DRAM init
- DDRINFO: DRAM rate 3200MTS
- DDRINFO:ddrphy calibration done
- DDRINFO: ddrmix config done
- SEC0: RNG instantiated
- Normal Boot
- Trying to boot from MMC2
- U-Boot 2021.04-lf_v2021.04+g8372631b28 (Jun 10 2022 - 06:24:02 +0000)
- CPU: i.MX8MQ rev2.1 1500 MHz (running at 1000 MHz)
- CPU: Commercial temperature grade (0C to 95C) at 28C
- Reset cause: POR
- Model: NXP i.MX8MQ EVK
- DRAM: 3 GiB
- TCPC: Vendor ID [0x1fc9], Product ID [0x5110], Addr [I2C0 0x50]
- MMC: FSL_SDHC: 0, FSL_SDHC: 1
- Loading Environment from MMC... *** Warning - bad CRC, using default environment
- [*]-Video Link 0imx8m_hdmi_probe
- (1280 x 720)
- [0] display-controller@32e00000, video
- [1] hdmi@32c00000, display
- In: serial
- Out: serial
- Err: serial
- SEC0: RNG instantiated
- BuildInfo:
- - ATF 2cad065
- switch to partitions #0, OK
- mmc1 is current device
- flash target is MMC:1
- Net: eth0: ethernet@30be0000
- Fastboot: Normal
- Normal Boot
- Hit any key to stop autoboot: 0
- starting USB...
- Bus usb@38100000: Failed to initialize board for imx8m USB
- probe failed, error -62
- Bus usb@38200000: Register 2000140 NbrPorts 2
- Starting the controller
- USB XHCI 1.10
- scanning bus usb@38200000 for devices... 1 USB Device(s) found
- scanning usb for storage devices... 0 Storage Device(s) found
- Device 0: unknown device
- switch to partitions #0, OK
- mmc1 is current device
- Scanning mmc 1:1...
- 47777 bytes read in 3 ms (15.2 MiB/s)
- Scanning disk [email protected]...
- ** Unrecognized filesystem type **
- ** Unrecognized filesystem type **
- ** Unrecognized filesystem type **
- ** Unrecognized filesystem type **
- ** Unrecognized filesystem type **
- ** Unrecognized filesystem type **
- ** Unrecognized filesystem type **
- ** Unrecognized filesystem type **
- ** Unrecognized filesystem type **
- ** Unrecognized filesystem type **
- Scanning disk [email protected]...
- Found 19 disks
- No EFI system partition
- BootOrder not defined
- EFI boot manager: Cannot load any image
- switch to partitions #0, OK
- mmc0(part 0) is current device
- ** Unrecognized filesystem type **
- Running BSP bootcmd ...
- switch to partitions #0, OK
- mmc1 is current device
- Failed to load 'boot.scr'
- 30118400 bytes read in 321 ms (89.5 MiB/s)
- Booting from mmc ...
- 47777 bytes read in 2 ms (22.8 MiB/s)
- Moving Image from 0x40480000 to 0x40600000, end=42350000
- ## Flattened Device Tree blob at 43000000
- Booting using the fdt blob at 0x43000000
- Host not halted after 16000 microseconds.
- Using Device Tree in place at 0000000043000000, end 000000004300eaa0
- Starting kernel ...
- [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
- [ 0.000000] Linux version 5.10.72-lts-5.10.y+gc59614bdd6f6 (oe-user@oe-host) (aarch64-poky-linux-gcc (GCC) 10.2.0, GNU ld (GNU Binutils) 2.36.1.20210209) #1 SMP PREEMPT Wed Jun 29 12
- [ 0.000000] Machine model: NXP i.MX8MQ EVK
- [ 0.000000] efi: UEFI not found.
- [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000080000000, size 896 MiB
Advertisement
Add Comment
Please, Sign In to add comment