API tools faq
paste
Advertisement
Astralix

Xelio10pro First Steps Again

Astralix
Aug 28th, 2013
101
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 22.23 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Initializing cgroup subsys cpu
  2. [ 0.000000] Linux version 3.0.36+ (uprinz@BigBox) (gcc version 4.7.3 20121106 (prerelease) (OSELAS.Toolchain-2012.12.1 linaro-4.7-2012.11) ) #10 SMP PREEMPT Wed Aug 28 23:47:09 CEST 2013
  3. [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
  4. [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  5. [ 0.000000] Machine: RK30board
  6. [ 0.000000] memory reserve: Memory(base:0x91800000 size:80M) reserved for <ion>
  7. [ 0.000000] memory reserve: Memory(base:0x90d00000 size:11M) reserved for <fb0 buf>
  8. [ 0.000000] memory reserve: Memory(base:0x90200000 size:11M) reserved for <fb2 buf>
  9. [ 0.000000] memory reserve: Memory(base:0x8fa00000 size:8M) reserved for <camera_ipp_mem>
  10. [ 0.000000] memory reserve: Total reserved 110M
  11. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  12. [ 0.000000] bootconsole [earlycon0] enabled
  13. [ 0.000000] CPU SRAM: copied sram code from c0b3a000 to fef00010 - fef01a58
  14. [ 0.000000] CPU SRAM: copied sram data from c0b3ba48 to fef01a58 - fef0236c
  15. [ 0.000000] sram_log:
  16. [ 0.000000] rk30_dvfs_init
  17. [ 0.000000] L310 cache controller enabled
  18. [ 0.000000] l2x0: 16 ways, CACHE_ID 0x4100c0c8, AUX_CTRL 0x76050001, Cache size: 524288 B
  19. [ 0.000000] DDR DEBUG: version 1.00 20130130
  20. [ 0.000000] DDR DEBUG: DDR3 Device
  21. [ 0.000000] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Total Capability=1024MB
  22. [ 0.000000] DDR DEBUG: init success!!! freq=396MHz
  23. [ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=1 extra clock, DGPS=180
  24. [ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=1 extra clock, DGPS=180
  25. [ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=1 extra clock, DGPS=180
  26. [ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=1 extra clock, DGPS=180
  27. [ 0.000000] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
  28. [ 0.000000] DDR DEBUG: DRV Pull-Up=0xb, DRV Pull-Dwn=0xb
  29. [ 0.000000] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
  30. [ 0.000000] rk30_iomux_init
  31. [ 0.000000] Boot mode: RECOVERY (2) flag: RECOVER (0xc3524203)
  32. [ 0.000000] PERCPU: Embedded 7 pages/cpu @c1deb000 s6976 r8192 d13504 u32768
  33. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 231936
  34. [ 0.000000] Kernel command line: console=ttyFIQ0 androidboot.console=ttyFIQ0 init=/init initrd=0x62000000,0x00200000 mtdparts=rk29xxnand:0x00002000@0x00000000(parameter),0x00002000@0x00002000(misc),0x00004000@0x00004000(kernel),0x00008000@0x00008000(boot),0x00008000@0x00010000(recovery),0x000C0000@0x00018000(backup),0x00040000@0x000D8000(cache),0x00500000@0x00118000(userdata),0x00002000@0x00618000(kpanic),0x00140000@0x0061A000(system),-@0x0075A000(user) bootver=2012-11-13#1.20 firmware_ver=4.2.2
  35. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  36. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  37. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  38. [ 0.000000] Memory: 762MB 152MB = 914MB total
  39. [ 0.000000] Memory: 906492k/906492k available, 142084k reserved, 155648K highmem
  40. [ 0.000000] Virtual kernel memory layout:
  41. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  42. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  43. [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
  44. [ 0.000000] vmalloc : 0xf7000000 - 0xfe800000 ( 120 MB)
  45. [ 0.000000] lowmem : 0xc0000000 - 0xf6800000 ( 872 MB)
  46. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  47. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  48. [ 0.000000] .init : 0xc0408000 - 0xc0433000 ( 172 kB)
  49. [ 0.000000] .text : 0xc0433000 - 0xc0ac9c10 (6748 kB)
  50. [ 0.000000] .data : 0xc0aca000 - 0xc0b39948 ( 447 kB)
  51. [ 0.000000] .bss : 0xc0b3d024 - 0xc15e2e30 (10904 kB)
  52. [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  53. [ 0.000000] Preemptible hierarchical RCU implementation.
  54. [ 0.000000] NR_IRQS:448
  55. [ 0.000000] rk30_gpio_init: 176 gpio irqs in 6 banks
  56. [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  57. [ 0.000000] Console: colour dummy device 80x30
  58. [ 0.004931] Calibrating delay loop (skipped) preset value.. 1631.46 BogoMIPS (lpj=8157341)
  59. [ 0.013840] pid_max: default: 32768 minimum: 301
  60. [ 0.019038] Mount-cache hash table entries: 512
  61. [ 0.024496] Initializing cgroup subsys debug
  62. [ 0.029179] Initializing cgroup subsys cpuacct
  63. [ 0.034020] Initializing cgroup subsys freezer
  64. [ 0.038851] CPU: Testing write buffer coherency: ok
  65. [ 0.144798] CPU1: Booted secondary processor
  66. [ 0.144834] Brought up 2 CPUs
  67. [ 0.152758] SMP: Total of 2 processors activated (3262.93 BogoMIPS).
  68. [ 0.159925] devtmpfs: initialized
  69. [ 0.171075] NET: Registered protocol family 16
  70. [ 0.175978] last_log: 0xef500000 map to 0xf7004000 and copy to 0xc0b411d8 (version 2.1)
  71. [ 0.206820] lcdc0 is used as primary display device contoller!
  72. [ 0.213327] lcdc1 is used as external display device controller!
  73. <hit enter to activate fiq debugger>
  74. 0.221571] console [ttyFIQ0] enabled, bootconsole disabled
  75. [ 0.221571] console [ttyFIQ0] enabled, bootconsole disabled
  76. [ 0.230603] Registered FIQ tty driver ef495000
  77. [ 0.242713] bio: create slab <bio-0> at 0
  78. [ 0.247104] SCSI subsystem initialized
  79. [ 0.247305] usbcore: registered new interface driver usbfs
  80. [ 0.247421] usbcore: registered new interface driver hub
  81. [ 0.261671] usbcore: registered new device driver usb
  82. [ 0.261947] rk30_i2c rk30_i2c.0: i2c-0: RK30 I2C adapter
  83. [ 0.262074] rk30_i2c rk30_i2c.1: i2c-1: RK30 I2C adapter
  84. [ 0.262200] rk30_i2c rk30_i2c.2: i2c-2: RK30 I2C adapter
  85. [ 0.262335] rk30_i2c rk30_i2c.3: i2c-3: RK30 I2C adapter
  86. [ 0.262473] rk30_i2c rk30_i2c.4: i2c-4: RK30 I2C adapter
  87. [ 0.262574] i2c-gpio: probe of i2c-gpio.5 failed with error -22
  88. [ 0.299135] rk30-adc rk30-adc: rk30 adc: driver initialized
  89. [ 0.299429] timed_gpio_probe
  90. [ 0.299526] Advanced Linux Sound Architecture Driver Version 1.0.24.
  91. [ 0.299937] Bluetooth: Core ver 2.16
  92. [ 0.299998] NET: Registered protocol family 31
  93. [ 0.300028] Bluetooth: HCI device and connection manager initialized
  94. [ 0.300070] Bluetooth: HCI socket layer initialized
  95. [ 0.300102] Bluetooth: L2CAP socket layer initialized
  96. [ 0.300145] Bluetooth: SCO socket layer initialized
  97. [ 0.301148] rk fb probe ok!
  98. [ 0.301223] Switching to clocksource timer1
  99. [ 0.304320] Switched to NOHz mode on CPU #0
  100. [ 0.304834] Switched to NOHz mode on CPU #1
  101. [ 0.307827] lcdc0:reg_phy_base = 0x1010c000,reg_vir_base:0xf70a0000
  102. [ 0.307900] fb0:win1
  103. [ 0.307905] fb1:win0
  104. [ 0.307909] fb2:win2
  105. [ 0.308011] rk30 lcdc0 clk enable...
  106. [ 0.308167] rk30 lcdc0 clk disable...
  107. [ 0.328654] fb0:phy:90d00000>>vir:f8000000>>len:0xb00000
  108. [ 0.328990] rk_fb_register>>>>>fb0
  109. [ 0.329171] rk_fb_register>>>>>fb1
  110. [ 0.329340] rk_fb_register>>>>>fb2
  111. [ 0.329495] rk30 lcdc0 clk enable...
  112. [ 0.329536] lcdc0: dclk:63157894>>fps:59 rk30_load_screen for lcdc0 ok!
  113. [ 0.329579] lcdc0 wakeup from standby!
  114. [ 0.329606] lcdc0 win1 open,atv layer:1
  115. [ 0.329638] lcdc0: dclk:63157894>>fps:59 rk30_load_screen for lcdc0 ok!
  116. [ 0.329682] lcdc1 driver not found!
  117. [ 0.329706] lcdc1 driver not found!
  118. [ 0.329942] lcdc1 driver not found!rk30 lcdc0 probe ok!
  119. [ 0.345913] lcdc1:reg_phy_base = 0x1010e000,reg_vir_base:0xf70a4000
  120. [ 0.345970] fb0:win1
  121. [ 0.345975] fb1:win0
  122. [ 0.345979] fb2:win2
  123. [ 0.346048] rk30 lcdc1 clk enable...
  124. [ 0.346075] rk30 lcdc1 clk disable...
  125. [ 0.367910] fb3:phy:90200000>>vir:f9000000>>len:0xb00000
  126. [ 0.368174] rk_fb_register>>>>>fb3
  127. [ 0.368360] rk_fb_register>>>>>fb4
  128. [ 0.368525] rk_fb_register>>>>>fb5
  129. [ 0.368550] rk30 lcdc1 probe ok!
  130. [ 0.374940] NET: Registered protocol family 2
  131. [ 0.375083] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  132. [ 0.375452] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  133. [ 0.377313] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
  134. [ 0.378676] TCP: Hash tables configured (established 131072 bind 65536)
  135. [ 0.378717] TCP reno registered
  136. [ 0.378743] UDP hash table entries: 512 (order: 2, 16384 bytes)
  137. [ 0.378808] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  138. [ 0.379118] NET: Registered protocol family 1
  139. [ 0.379316] RK29 Backlight Driver Initialized.
  140. [ 0.379515] Unpacking initramfs...
  141. [ 0.475810] Freeing initrd memory: 2048K
  142. [ 0.475998] rk30-tsadc rk30-tsadc: initialized
  143. [ 0.476098] PMU: registered new PMU device of type 0
  144. [ 0.476173] DVFS ERR: gpu can't get regulator in clk_enable_dvfs
  145. [ 0.476218] DVFS ERR: ddr can't get regulator in clk_enable_dvfs
  146. [ 0.476273] DVFS ERR: cpu can't get regulator in clk_enable_dvfs
  147. [ 0.477054] Loaded driver for PL330 DMAC-1 rk29-pl330
  148. [ 0.477090] DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
  149. [ 0.477265] Loaded driver for PL330 DMAC-2 rk29-pl330
  150. [ 0.477300] DBUFF-64x8bytes Num_Chans-7 Num_Peri-20 Num_Events-14
  151. [ 0.477931] highmem bounce pool size: 64 pages
  152. [ 0.478114] ashmem: initialized
  153. [ 0.483513] fuse init (API version 7.16)
  154. [ 0.485084] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  155. [ 0.485133] io scheduler noop registered
  156. [ 0.485159] io scheduler deadline registered
  157. [ 0.485245] io scheduler cfq registered (default)
  158. [ 0.491120] rga: Driver loaded succesfully
  159. [ 0.491244] HDMI: hdmi_register() - video source 1 display 0
  160. [ 0.491587] HDMI: hdmi_submit_work event 0100 delay 0
  161. [ 0.491795] rk30-hdmi rk30-hdmi: rk30 hdmi probe sucess.
  162. [ 0.492042] rk_serial.c v1.3 2012-12-14
  163. [ 0.492141] rk_serial.0: ttyS0 at MMIO 0x10124000 (irq = 66) is a rk29_serial.0
  164. [ 0.492375] HDMI:
  165. [ 0.492380] hdmi_work_queue() - evt= 1 0
  166. [ 0.492415] HDMI: hdmi_work_queue() - exit
  167. [ 0.492422]
  168. [ 0.531363] rk_serial rk_serial.0: membase 0xf70c8000
  169. [ 0.531434] rk_serial.3: ttyS3 at MMIO 0x20068000 (irq = 69) is a rk29_serial.3
  170. [ 0.571308] rk_serial rk_serial.3: membase 0xf70d0000
  171. [ 0.571549] Rockchip ion module(version: 1.0) is successfully loaded
  172. [ 0.573612] loop: module loaded
  173. [ 0.573660] Android kernel panic handler initialized (bind=kpanic)
  174. [ 0.574233] PPP generic driver version 2.4.2
  175. [ 0.574398] PPP Deflate Compression module registered
  176. [ 0.574428] PPP BSD Compression module registered
  177. [ 0.577809] PPP MPPE Compression module registered
  178. [ 0.577839] NET: Registered protocol family 24
  179. [ 0.577924] usbcore: registered new interface driver asix
  180. [ 0.577985] usbcore: registered new interface driver cdc_ether
  181. [ 0.578046] usbcore: registered new interface driver dm9620
  182. [ 0.578104] usbcore: registered new interface driver SR9700_android
  183. [ 0.578164] usbcore: registered new interface driver net1080
  184. [ 0.578221] usbcore: registered new interface driver cdc_subset
  185. [ 0.578280] usbcore: registered new interface driver zaurus
  186. [ 0.578319] cdc_ncm: 04-Aug-2011
  187. [ 0.578365] usbcore: registered new interface driver cdc_ncm
  188. [ 0.578396] Rockchip WiFi SYS interface (V1.00) ...
  189. [ 0.578451] Initializing USB Mass Storage driver...
  190. [ 0.578518] usbcore: registered new interface driver usb-storage
  191. [ 0.578550] USB Mass Storage support registered.
  192. [ 0.578667] usbcore: registered new interface driver usbserial
  193. [ 0.578724] USB Serial support registered for generic
  194. [ 0.578795] usbcore: registered new interface driver usbserial_generic
  195. [ 0.578829] usbserial: USB Serial Driver core
  196. [ 0.578877] USB Serial support registered for GSM modem (1-port)
  197. [ 0.578945] usbcore: registered new interface driver option
  198. [ 0.578975] option: v0.7.2:USB Driver for GSM modems
  199. [ 0.790997] DWC_OTG: ^^^^^^^^^^^^^^^^^Device Mode
  200. [ 0.791036] usb20_otg usb20_otg: DWC OTG Controller
  201. [ 0.791132] usb20_otg usb20_otg: new USB bus registered, assigned bus number 1
  202. [ 0.791197] usb20_otg usb20_otg: irq 48, io mem 0x00000000
  203. [ 0.791231] DWC_OTG: dwc_otg_hcd_start controller in device mode,everest
  204. [ 0.791341] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  205. [ 0.791381] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  206. [ 0.791419] usb usb1: Product: DWC OTG Controller
  207. [ 0.791446] usb usb1: Manufacturer: Linux 3.0.36+ dwc_otg_hcd
  208. [ 0.791478] usb usb1: SerialNumber: usb20_otg
  209. [ 0.791854] hub 1-0:1.0: USB hub found
  210. [ 0.791886] hub 1-0:1.0: 1 port detected
  211. [ 0.794510] DWC_OTG: host20_driver_probe host2.0 reg addr: 0x101c0000 remap:0xf7180000
  212. [ 0.892282] cfg80211: Calling CRDA to update world regulatory domain
  213. [ 1.005444] DWC_OTG: ^^^^^^^^^^^^^^^^^^Host Mode
  214. [ 1.005483] usb20_host usb20_host: DWC OTG Controller
  215. [ 1.005541] usb20_host usb20_host: new USB bus registered, assigned bus number 2
  216. [ 1.005607] usb20_host usb20_host: irq 49, io mem 0x00000000
  217. [ 1.005671] DWC_OTG: Init: Port Power? op_state=1
  218. [ 1.005697] DWC_OTG: Init: Power Port (0)
  219. [ 1.005754] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  220. [ 1.005792] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  221. [ 1.005832] usb usb2: Product: DWC OTG Controller
  222. [ 1.005859] usb usb2: Manufacturer: Linux 3.0.36+ host20_hcd
  223. [ 1.005889] usb usb2: SerialNumber: usb20_host
  224. [ 1.006211] hub 2-0:1.0: USB hub found
  225. [ 1.006243] hub 2-0:1.0: 1 port detected
  226. [ 1.073441] android_usb gadget: Mass Storage Function, version: 2009/09/11
  227. [ 1.073483] android_usb gadget: Number of LUNs=2
  228. [ 1.073518] lun0: LUN: removable file: (no medium)
  229. [ 1.073546] lun1: LUN: removable file: (no medium)
  230. [ 1.073775] android_usb gadget: android_usb ready
  231. [ 1.074003] input: rk29-keypad as /devices/platform/rk29-keypad/input/input0
  232. [ 1.074265] usbcore: registered new interface driver xpad
  233. [ 1.074297] ft5x0x module init
  234. [ 1.074550] i2c-core: driver [gs_mma7660] using legacy suspend method
  235. [ 1.074587] i2c-core: driver [gs_mma7660] using legacy resume method
  236. [ 1.074625] sensor_register_slave:mma7660,id=14
  237. [ 1.074995] lirc_dev: IR Remote Control driver registered, major 250
  238. [ 1.075031] IR NEC protocol handler initialized
  239. [ 1.075056] IR RC5(x) protocol handler initialized
  240. [ 1.075082] IR RC6 protocol handler initialized
  241. [ 1.075107] IR JVC protocol handler initialized
  242. [ 1.075131] IR Sony protocol handler initialized
  243. [ 1.075158] IR RC5 (streamzap) protocol handler initialized
  244. [ 1.075188] IR LIRC bridge handler initialized
  245. [ 1.075211] Linux video capture interface: v2.00
  246. [ 1.075413] usbcore: registered new interface driver uvcvideo
  247. [ 1.075446] USB Video Class driver (v1.1.0)
  248. [ 1.075499] def_ref_volt: 2500mV, curr_ref_volt: 2500mV
  249. [ 1.091887] rk30_adc_battery: driver initialized
  250. [ 1.092297] device-mapper: uevent: version 1.0.3
  251. [ 1.092571] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
  252. [ 1.092727] Bluetooth: HCI UART driver ver 2.2
  253. [ 1.092755] Bluetooth: HCI H4 protocol initialized
  254. [ 1.092783] Bluetooth: HCILL protocol initialized
  255. [ 1.092851] cpuidle: using governor ladder
  256. [ 1.092876] cpuidle: using governor menu
  257. [ 1.108225]
  258. [ 1.108229] drivers/mmc/core/core.c...1824.. ===== mmc_rescan Begin....[mmc0]
  259. [ 1.113387] rk29_sdmmc_change_clk_div..1935.. newDiv=62, newCLK=299Khz [sd_mmc]
  260. [ 1.113467] .Line3910..The End of SDMMC-probe Ver.5.03 The last modify date is 2013-02-21. [sd_mmc]
  261. [ 1.113673] .Line3910..The End of SDMMC-probe Ver.5.03 The last modify date is 2013-02-21. [sdio]
  262. [ 1.115158] usbcore: registered new interface driver usbhid
  263. [ 1.115188] usbhid: USB HID core driver
  264. [ 1.115446] logger: created 256K log 'log_main'
  265. [ 1.115529] logger: created 256K log 'log_events'
  266. [ 1.115614] logger: created 256K log 'log_radio'
  267. [ 1.115693] logger: created 256K log 'log_system'
  268. [ 1.155575]
  269. [ 1.155579] mmc_attach_sd..1219.. ===== Begin to identify card as SD-card. [mmc0]
  270. [ 1.201699] rk29_sdmmc_change_clk_div..1935.. newDiv=1, newCLK=18562Khz [sd_mmc]
  271. [ 1.201815] mmc0: new SD card at address e01f
  272. [ 1.235809] RT5631 0-001a: dapm: unknown pin HP_L
  273. [ 1.235839] RT5631 0-001a: dapm: unknown pin HP_R
  274. [ 1.252076] asoc: RT5631 HiFi <-> rk29_i2s.0 mapping ok
  275. [ 1.252489] ALSA device list:
  276. [ 1.252508] #0: RK29_RT5631
  277. [ 1.252599] GACT probability NOT on
  278. [ 1.252623] Mirror/redirect action on
  279. [ 1.252644] u32 classifier
  280. [ 1.252660] Actions configured
  281. [ 1.252682] Netfilter messages via NETLINK v0.30.
  282. [ 1.252746] nf_conntrack version 0.5.0 (14195 buckets, 56780 max)
  283. [ 1.253039] ctnetlink v0.93: registering with nfnetlink.
  284. [ 1.253093] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  285. [ 1.253129] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  286. [ 1.253409] xt_time: kernel timezone is -0000
  287. [ 1.253553] ip_tables: (C) 2000-2006 Netfilter Core Team
  288. [ 1.253686] arp_tables: (C) 2002 David S. Miller
  289. [ 1.253745] TCP cubic registered
  290. [ 1.253763] Initializing XFRM netlink socket
  291. [ 1.254173] NET: Registered protocol family 10
  292. [ 1.254731] Mobile IPv6
  293. [ 1.254768] ip6_tables: (C) 2000-2006 Netfilter Core Team
  294. [ 1.254890] IPv6 over IPv4 tunneling driver
  295. [ 1.255469] NET: Registered protocol family 17
  296. [ 1.255514] NET: Registered protocol family 15
  297. [ 1.255684] Bluetooth: RFCOMM TTY layer initialized
  298. [ 1.255733] Bluetooth: RFCOMM socket layer initialized
  299. [ 1.255763] Bluetooth: RFCOMM ver 1.11
  300. [ 1.255786] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  301. [ 1.255814] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  302. [ 1.255932] NET: Registered protocol family 35
  303. [ 1.256015] [BT_RFKILL]: Enter rfkill_rk_init
  304. [ 1.256100] [BT_RFKILL]: Request irq for bt wakeup host
  305. [ 1.256140] [BT_RFKILL]: ** disable irq
  306. [ 1.257361] mmcblk0: mmc0:e01f SU02G 1.84 GiB
  307. [ 1.259009]
  308. [ 1.259012] msdos_partition..461... ==== Begin to parse sdcard-partition. [mmc0]
  309. [ 1.259058] msdos_partition..530... ==== The sdcard has MBR. [mmc0]
  310. [ 1.259092] msdos_partition..543... ==== partition-1, size=1930240KB [mmc0]
  311. [ 1.259128] msdos_partition..571... ==== main partition-1....[mmc0]
  312. [ 1.259163] mmcblk0: p1
  313. [ 1.259473] mmc_rescan_try_freq..1718.. ===== Initialize SD-card successfully. [mmc0]
  314. [ 1.259522]
  315. [ 1.259525] drivers/mmc/core/core.c...1824.. ===== mmc_rescan Begin....[mmc1]
  316. [ 1.281289] [BT_RFKILL]: bt shut off power
  317. [ 1.311300] [BT_RFKILL]: rk903_26M device registered.
  318. [ 1.311463] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  319. [ 1.311527] Registering SWP/SWPB emulation handler
  320. [ 1.312001] sensor_init: Probe name sensors
  321. [ 1.312026] sensor-dev.c v1.0 2013-2-18
  322. [ 1.312050] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
  323. [ 1.312323] usbcore: registered new interface driver snd-usb-audio
  324. [ 1.312449] Freeing init memory: 172K
  325. [ 1.312560] rk30-camera version: v0.2.31 Zoom by ipp
  326. [ 1.314591] get cif ldo failed!
  327. [ 1.314612] get cif ldo failed!
  328. [ 1.317157] get cif ldo failed!
  329. [ 1.317181] camera 34-0-ov5642_back: Probe ov5642_back failed
  330. [ 1.317232] rk30-camera version: v0.2.31 Zoom by ipp
  331. [ 1.317431] get cif ldo failed!
  332. [ 1.317451] get cif ldo failed!
  333. [ 1.318859] get cif ldo failed!
  334. [ 1.318882] camera 33-0-ov2659_front: Probe ov2659_front failed
  335. [ 1.336906] gp_rknand_info = : 0xef7d7400
  336. [ 1.337063] request IRQ_NANDC irq , ret=0.........
  337. [ 1.337153] FlashCopyProgBuf1=0xc1487000
  338. [ 1.337199] ATime: 40 ns AHB: 148 timming: 1081
  339. [ 1.337229] No.1 FLASH INFO:98 de 84 93 72
  340. [ 1.337259] No.3 FLASH INFO:98 de 84 93 72
  341. [ 1.337593] ATime: 32 ns AHB: 148 timming: 1061
  342. [ 1.337771] ATime: 32 ns AHB: 148 timming: 1061
  343. [ 1.337796] randomizer = 2 , EccBits = 28 pSpec->pReadRetrial = bf00bb78
  344. [ 1.364001] GetRemapTbl...done
  345. [ 2.382423] FTL INFO:Version = 438,Date = 20121229
  346. [ 2.382451] totalLogicBlkRaw = 3929
  347. [ 2.382478] gBootMedia = 1 gSdmmcFwPartOffset =0!
  348. [ 2.382504] rknand_buffer.c version: 4.38 20121130!
  349. [ 2.382708] 11 cmdlinepart partitions found on MTD device rk29xxnand
  350. [ 2.382745] Creating 11 MTD partitions on "rk29xxnand":
  351. [ 2.382777] 0x000000000000-0x000000400000 : "parameter"
  352. [ 2.383697] 0x000000400000-0x000000800000 : "misc"
  353. [ 2.384341] 0x000000800000-0x000001000000 : "kernel"
  354. [ 2.384951] 0x000001000000-0x000002000000 : "boot"
  355. [ 2.385572] 0x000002000000-0x000003000000 : "recovery"
  356. [ 2.386190] 0x000003000000-0x00001b000000 : "backup"
  357. [ 2.387065] 0x00001b000000-0x000023000000 : "cache"
  358. [ 2.387765] 0x000023000000-0x0000c3000000 : "userdata"
  359. [ 2.390202] 0x0000c3000000-0x0000c3400000 : "kpanic"
  360. [ 2.392425] apanic: Bound to mtd partition 'kpanic'
  361. [ 2.392453] apanic: No panic data available
  362. [ 2.392480] 0x0000c3400000-0x0000eb400000 : "system"
  363. [ 2.393620] 0x0000eb400000-0x0003d6400000 : "user"
  364. [ 2.402772] startBlk = 125 sysProtAddr = 124
  365. [ 2.409279] init: cannot open '/initlogo.rle'
  366. [ 2.412068] FAT-fs (mtdblock10): bogus number of reserved sectors
  367. [ 2.412103] FAT-fs (mtdblock10): Can't find a valid FAT filesystem
  368. [ 2.451494] init: Unable to open persistent property directory /data/property errno: 2
  369. [ 2.454232] android_usb: already disabled
  370. [ 2.468135] adb_open
  371. [ 2.506365] rk30_lcdc_blank>>>>>4
  372. [ 2.506402] rk30_lcdc_blank>>>>>0
  373. [ 2.678372] EXT4-fs (mtdblock6): VFS: Can't find ext4 filesystem
  374. [ 2.827403] EXT4-fs (mtdblock6): VFS: Can't find ext4 filesystem
  375. [ 3.029914] EXT4-fs (mtdblock6): VFS: Can't find ext4 filesystem
  376. [ 3.215585] EXT4-fs (mtdblock6): VFS: Can't find ext4 filesystem
  377. [ 9.031357] DWC_OTG: dwc_otg_hcd_enable, disable host controller
  378. [ 16.801307] DWC_OTG: ********vbus detect*********************************************
  379. [ 16.986593] DWC_OTG: ********soft connect!!!*****************************************
  380. [ 16.992601] DWC_OTG: USB SUSPEND
  381. [ 17.291137] DWC_OTG: USB RESET
  382. [ 17.377792] android_work: sent uevent USB_STATE=CONNECTED
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!