YorkLTx

tires

Jan 22nd, 2021 (edited)
20
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 4.10 KB | None | 0 0
  1. [2021-01-22 19:23:43] [Output] : ★ Han Tonio takes ahold of his power gun, sliding a 21mm onto it, as he would undo the five nuts-
  2. [2021-01-22 19:23:48] [Output] : ★ holding the rim in place. ((Han Tonio))
  3. [2021-01-22 19:24:20] [Output] : ★ Han Tonio lays the gun on the lift, taking a tight grasp of the heavy wheel, as he would let it drop-
  4. [2021-01-22 19:24:27] [Output] : ★ onto the floor with his hands aiding. ((Han Tonio))
  5. [2021-01-22 19:24:42] [Output] : ★ Han Tonio slides it away from the car, laying it on to the wall behind the car.
  6. [2021-01-22 19:25:23] [Output] : ★ Han Tonio walks towards the new tire+rim setup the client had brought, revealing the set of 4.
  7. [2021-01-22 19:25:44] [Output] : ★ Han Tonio takes ahold of one for the front, as he would lay it onto the ground, rolling it away to-
  8. [2021-01-22 19:25:45] [Output] : ★ the car. ((Han Tonio))
  9. [2021-01-22 19:26:08] [Output] : ★ Han Tonio grabs the rim by the spokes, aswell as a nut his right hand, sliding both onto the-
  10. [2021-01-22 19:26:12] [Output] : ★ car at the same time. ((Han Tonio))
  11. [2021-01-22 19:26:28] [Output] : ★ Han Tonio quickly tightens that down with his hand, as he would take the remaining 4 off the-
  12. [2021-01-22 19:26:33] [Output] : ★ ground. ((Han Tonio))
  13. [2021-01-22 19:26:48] [Output] : ★ Han Tonio ligns them up onto the car, tightening them down with his hands.
  14. [2021-01-22 19:27:09] [Output] : ★ Han Tonio then grasps his torque wrench from the toolbox, setting it to 11kg of torque.
  15. [2021-01-22 19:27:50] [Output] : ★ Han Tonio slides it onto the first nut, rotating it clockwise until the two *click* *click* sound.
  16. [2021-01-22 19:28:08] [Output] : ★ Han Tonio would continuously tighten the rest of the nuts, following a star pattern.
  17. [2021-01-22 19:28:28] [Output] : ★ Han Tonio then proceeds to double check the torque, by raising it a rad bit on the bottom of the-
  18. [2021-01-22 19:28:39] [Output] : ★ wrench, tightening down all the nuts one more time. ((Han Tonio))
  19. [2021-01-22 19:29:25] [Output] : ★ Han Tonio then walks onto the back of the car along with his tools, sliding the air gun onto-
  20. [2021-01-22 19:29:39] [Output] : ★ one of the nuts, as he would visibly struggle to get it to undo the nut. ((Han Tonio))
  21. [2021-01-22 19:29:48] [Output] : Han Tonio says: Damnit, must be low on air the compressor.
  22. [2021-01-22 19:30:05] [Output] : ★ Han Tonio walks towards the compress inside the paint booth, sliding the switch upwards, as-
  23. [2021-01-22 19:30:16] [Output] : ★ it woudld start to fill up in it's tipical loud manner. ((Han Tonio))
  24. [2021-01-22 19:30:28] [Output] : ★ Han Tonio walks back onto the car, as he would then undo all the five nuts.
  25. [2021-01-22 19:30:52] [Output] : ★ Han Tonio grasps the wheel tightly by the spokes, laying it flat next to the other one by his right si
  26. [2021-01-22 19:30:54] [Output] : ★ side. ((Han Tonio))
  27. [2021-01-22 19:31:21] [Output] : ★ Han Tonio then takes a walk to the remaining 3 brand new rims and tires, taking one from the lot,
  28. [2021-01-22 19:31:25] [Output] : ★ and rolling it to the car. ((Han Tonio))
  29. [2021-01-22 19:31:54] [Output] : ★ Han Tonio lifts it up onto the hub, with the aid of a nut, poorly securing it in place, just until-
  30. [2021-01-22 19:32:12] [Output] : ★ he would grab the remaining nuts, which he would do, one by one, and onto the wheel. ((Han Tonio))
  31. [2021-01-22 19:32:25] [Output] : ★ Han Tonio runs them down with his hand, as he would setup the torque wrench back to 11kgs,
  32. [2021-01-22 19:32:41] [Output] : ★ tightening down the nuts and double checking it afterwards with a tad more torque, ((Han Tonio))
  33. [2021-01-22 19:32:50] [Output] : ★ always following a star pattern. ((Han Tonio))
  34. [2021-01-22 19:37:06] [Output] : ★ Han Tonio the repeats the process with the passenger's side wheels, as he would reach back to-
  35. [2021-01-22 19:37:20] [Output] : ★ the lift's commands, pressing on the downward button, as it would slowly- ((Han Tonio))
  36. [2021-01-22 19:37:37] [Output] : ★ lower back down, with a *zzzmmm* noise. ((Han Tonio))
  37.  
Add Comment
Please, Sign In to add comment