Advertisement
Guest User

Untitled

a guest
Jun 27th, 2019
60
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 66.92 KB | None | 0 0
  1. [ 0.000000] Booting Linux on physical CPU 0x100
  2. [ 0.000000] Linux version 4.9.140-tegra (root@TX1-DEV2) (gcc version 6.4.1 20170707 (Linaro GCC 6.4-2017.08) ) #1 SMP PREEMPT Mon May 6 07:40:50 CDT 2019
  3. [ 0.000000] Boot CPU: AArch64 Processor [411fd073]
  4. [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 16416,
  5. [ 0.000000] OF: fdt: - 80000000 , 70000000
  6. [ 0.000000] OF: fdt: - f0200000 , 185600000
  7. [ 0.000000] OF: fdt: - 275e00000 , 200000
  8. [ 0.000000] OF: fdt: - 276600000 , 200000
  9. [ 0.000000] OF: fdt: - 277000000 , 200000
  10. [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '')
  11. [ 0.000000] bootconsole [uart8250] enabled
  12. [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB
  13. [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB
  14. [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB
  15. [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB
  16. [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB
  17. [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB
  18. [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops
  19. [ 0.000000] cma: Reserved 64 MiB at 0x00000000fc000000
  20. [ 0.000000] On node 0 totalpages: 2055168
  21. [ 0.000000] DMA zone: 8192 pages used for memmap
  22. [ 0.000000] DMA zone: 0 pages reserved
  23. [ 0.000000] DMA zone: 523776 pages, LIFO batch:31
  24. [ 0.000000] Normal zone: 24008 pages used for memmap
  25. [ 0.000000] Normal zone: 1531392 pages, LIFO batch:31
  26. [ 0.000000] psci: probing for conduit method from DT.
  27. [ 0.000000] psci: PSCIv1.0 detected in firmware.
  28. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  29. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  30. [ 0.000000] psci: SMC Calling Convention v1.1
  31. [ 0.000000] percpu: Embedded 23 pages/cpu @ffffffc1f6776000 s53400 r8192 d32616 u94208
  32. [ 0.000000] pcpu-alloc: s53400 r8192 d32616 u94208 alloc=23*4096
  33. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
  34. [ 0.000000] Speculative Store Bypass Disable mitigation not required
  35. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2022968
  36. [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x2772e0000 gpt usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.983055.1 bl_prof_dataptr=0x10000@0x275840000 sdhci_tegra.en_boot_part_access=1 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4
  37. [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes
  38. [ 0.000000] log_buf_len total cpu_extra contributions: 163840 bytes
  39. [ 0.000000] log_buf_len min size: 32768 bytes
  40. [ 0.000000] log_buf_len: 262144 bytes
  41. [ 0.000000] early log buf free: 29488(89%)
  42. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  43. [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
  44. [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
  45. [ 0.000000] Memory: 7974816K/8220672K available (15038K kernel code, 2912K rwdata, 6672K rodata, 8512K init, 607K bss, 180320K reserved, 65536K cma-reserved)
  46. [ 0.000000] Virtual kernel memory layout:
  47. [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
  48. [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
  49. [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f30000 ( 15040 KB)
  50. [ 0.000000] .rodata : 0xffffff8008f30000 - 0xffffff80095c0000 ( 6720 KB)
  51. [ 0.000000] .init : 0xffffff80095c0000 - 0xffffff8009e10000 ( 8512 KB)
  52. [ 0.000000] .data : 0xffffff8009e10000 - 0xffffff800a0e8008 ( 2913 KB)
  53. [ 0.000000] .bss : 0xffffff800a0e8008 - 0xffffff800a17fe3c ( 608 KB)
  54. [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB)
  55. [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
  56. [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
  57. [ 0.000000] 0xffffffbf00000000 - 0xffffffbf07dc8000 ( 125 MB actual)
  58. [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc1f7200000 ( 8050 MB)
  59. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
  60. [ 0.000000] Preemptible hierarchical RCU implementation.
  61. [ 0.000000] Build-time adjustment of leaf fanout to 64.
  62. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6.
  63. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
  64. [ 0.000000] NR_IRQS:64 nr_irqs:64 0
  65. [ 0.000000] GIC: Using split EOI/Deactivate mode
  66. [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys).
  67. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns
  68. [ 0.000003] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns
  69. [ 0.010005] Console: colour dummy device 80x25
  70. [ 0.014668] console [tty0] enabled
  71. [ 0.018225] bootconsole [uart8250] disabled
  72. [ 0.022601] kmemleak: Kernel memory leak detector disabled
  73. [ 0.022617] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000)
  74. [ 0.022631] pid_max: default: 32768 minimum: 301
  75. [ 0.022949] Security Framework initialized
  76. [ 0.023111] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
  77. [ 0.023122] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
  78. [ 0.023718] ftrace: allocating 46769 entries in 183 pages
  79. [ 0.147920] sched-energy: Sched-energy-costs installed from DT
  80. [ 0.147940] ASID allocator initialised with 65536 entries
  81. [ 0.184007] tegra-id: chipid=21817.
  82. [ 0.184022] tegra-id: opt_subrevision=1.
  83. [ 0.184044] Tegra Revision: A02p SKU: 0xdc CPU Process: 0 SoC Process: 0
  84. [ 0.184058] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/quill/kernel-dts/tegra186-quill-p3310-1000-c03-00-base.dts
  85. [ 0.184075] DTB Build time: Mar 13 2019 00:34:41
  86. [ 0.229944] CPU1: Booted secondary processor [4e0f0030]
  87. [ 0.261604] CPU2: Booted secondary processor [4e0f0030]
  88. [ 0.293449] CPU3: Booted secondary processor [411fd073]
  89. [ 0.325434] CPU4: Booted secondary processor [411fd073]
  90. [ 0.357439] CPU5: Booted secondary processor [411fd073]
  91. [ 0.357497] Brought up 6 CPUs
  92. [ 0.357544] SMP: Total of 6 processors activated.
  93. [ 0.357558] CPU features: detected feature: 32-bit EL0 Support
  94. [ 0.358294] CPU: All CPU(s) started at EL2
  95. [ 0.358347] alternatives: patching kernel code
  96. [ 0.367493] devtmpfs: initialized
  97. [ 0.405350] Initilizing CustomIPI irq domain
  98. [ 0.405572] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  99. [ 0.405601] futex hash table entries: 2048 (order: 5, 131072 bytes)
  100. [ 0.406491] pinctrl core: initialized pinctrl subsystem
  101. [ 0.406713] OS set in device tree is not L4T.
  102. [ 0.406881] regulator-dummy: no parameters
  103. [ 0.407036] Initializing plugin-manager
  104. [ 0.407102] Plugin module not found
  105. [ 0.407149] Plugin-manager status disabled
  106. [ 0.408927] NET: Registered protocol family 16
  107. [ 0.409691] pstore: using zlib compression
  108. [ 0.410096] console [pstore-1] enabled
  109. [ 0.410108] pstore: Registered ramoops as persistent store backend
  110. [ 0.410122] ramoops: attached 0x200000@0x275880000, ecc: 0/0
  111. [ 0.429082] cpuidle: using governor menu
  112. [ 0.430441] bpmp: waiting for handshake
  113. [ 0.430458] bpmp: handshake completed
  114. [ 0.430482] bpmp: synchronizing channels
  115. [ 0.430499] bpmp: channels synchronized
  116. [ 0.430513] bpmp: mail init ok
  117. [ 0.432565] arm-smmu 12000000.iommu: probing hardware configuration...
  118. [ 0.432585] arm-smmu 12000000.iommu: SMMUv2 with:
  119. [ 0.432599] arm-smmu 12000000.iommu: stage 1 translation
  120. [ 0.432613] arm-smmu 12000000.iommu: stage 2 translation
  121. [ 0.432626] arm-smmu 12000000.iommu: nested translation
  122. [ 0.432641] arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80
  123. [ 0.432662] arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)!
  124. [ 0.432682] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only)
  125. [ 0.432697] arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA
  126. [ 0.432711] arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA
  127. [ 0.434888] vdso: 2 pages (1 code @ ffffff8008f37000, 1 data @ ffffff8009e14000)
  128. [ 0.434920] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  129. [ 0.437266] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations
  130. [ 0.439060] Registering BPMP clocks...
  131. [ 0.439167] tegra_bpmp_clk_init: clock init ok (636 clks)
  132. [ 0.439876] tegra_bpmp_of_clk_init: EMC proxy not found.
  133. [ 0.441368] tegra_powergate_init: DONE
  134. [ 0.441390] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/quill/kernel-dts/tegra186-quill-p3310-1000-c03-00-base.dts
  135. [ 0.441420] DTB Build time: Mar 13 2019 00:34:41
  136. [ 0.443387] Tegra reboot handler registered.
  137. [ 0.444922] tegra-pmc c360000.pmc: scratch reg offset dts data not present
  138. [ 0.445001] tegra-pmc: get_secure_pmc_setting: done secure_pmc=0
  139. [ 0.445026] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET
  140. [ 0.445039] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L0
  141. [ 0.445050] tegra-pmc: ### PMC reset status reg: 0x0
  142. [ 0.445241] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered
  143. [ 0.445268] tegra-pmc c360000.pmc: IO padctrl driver initialized
  144. [ 0.445621] iommu: Adding device 3460000.sdhci to group 0
  145. [ 0.446318] iommu: Adding device 3400000.sdhci to group 1
  146. [ 0.447416] iommu: Adding device 3507000.ahci-sata to group 2
  147. [ 0.447444] arm-smmu: forcing sodev map for 3507000.ahci-sata
  148. [ 0.447894] iommu: Adding device 3160000.i2c to group 3
  149. [ 0.448340] iommu: Adding device c240000.i2c to group 4
  150. [ 0.448708] iommu: Adding device 3180000.i2c to group 5
  151. [ 0.449086] iommu: Adding device 3190000.i2c to group 6
  152. [ 0.449556] iommu: Adding device 31b0000.i2c to group 7
  153. [ 0.449916] iommu: Adding device 31c0000.i2c to group 8
  154. [ 0.450269] iommu: Adding device c250000.i2c to group 9
  155. [ 0.450622] iommu: Adding device 31e0000.i2c to group 10
  156. [ 0.452116] iommu: Adding device 3210000.spi to group 11
  157. [ 0.452477] iommu: Adding device c260000.spi to group 12
  158. [ 0.452834] iommu: Adding device 3240000.spi to group 13
  159. [ 0.453585] iommu: Adding device 3100000.serial to group 14
  160. [ 0.453950] iommu: Adding device 3110000.serial to group 15
  161. [ 0.454311] iommu: Adding device c280000.serial to group 16
  162. [ 0.454667] iommu: Adding device 3130000.serial to group 17
  163. [ 0.456080] iommu: Adding device 2490000.ether_qos to group 18
  164. [ 0.456105] arm-smmu: forcing sodev map for 2490000.ether_qos
  165. [ 0.456738] iommu: Adding device b000000.rtcpu to group 19
  166. [ 0.459195] iommu: Adding device 13e10000.host1x to group 20
  167. [ 0.459540] iommu: Adding device 13e10000.host1x:ctx0 to group 21
  168. [ 0.459868] iommu: Adding device 13e10000.host1x:ctx1 to group 22
  169. [ 0.460196] iommu: Adding device 13e10000.host1x:ctx2 to group 23
  170. [ 0.460517] iommu: Adding device 13e10000.host1x:ctx3 to group 24
  171. [ 0.460842] iommu: Adding device 13e10000.host1x:ctx4 to group 25
  172. [ 0.461197] iommu: Adding device 13e10000.host1x:ctx5 to group 26
  173. [ 0.461543] iommu: Adding device 13e10000.host1x:ctx6 to group 27
  174. [ 0.461871] iommu: Adding device 13e10000.host1x:ctx7 to group 28
  175. [ 0.462374] iommu: Adding device 150c0000.nvcsi to group 29
  176. [ 0.463071] iommu: Adding device 15700000.vi to group 30
  177. [ 0.463456] iommu: Adding device 15600000.isp to group 31
  178. [ 0.463937] iommu: Adding device 15210000.nvdisplay to group 32
  179. [ 0.464585] iommu: Adding device 15340000.vic to group 33
  180. [ 0.464828] iommu: Adding device 154c0000.nvenc to group 34
  181. [ 0.465094] iommu: Adding device 15480000.nvdec to group 35
  182. [ 0.465474] iommu: Adding device 15380000.nvjpg to group 36
  183. [ 0.465727] iommu: Adding device 15500000.tsec to group 37
  184. [ 0.465963] iommu: Adding device 15100000.tsecb to group 38
  185. [ 0.466679] iommu: Adding device 15810000.se to group 39
  186. [ 0.466915] iommu: Adding device 15820000.se to group 40
  187. [ 0.467146] iommu: Adding device 15830000.se to group 41
  188. [ 0.467379] iommu: Adding device 15840000.se to group 42
  189. [ 0.468312] iommu: Adding device smmu_test to group 43
  190. [ 0.468941] mc: mapped MMIO address: 0xffffff800a680000 -> 0x2c10000
  191. [ 0.468966] mc: mapped MMIO address: 0xffffff800a6a0000 -> 0x2c20000
  192. [ 0.468987] mc: mapped MMIO address: 0xffffff800a6c0000 -> 0x2c30000
  193. [ 0.469008] mc: mapped MMIO address: 0xffffff800a6e0000 -> 0x2c40000
  194. [ 0.469030] mc: mapped MMIO address: 0xffffff800a7b0000 -> 0x2c50000
  195. [ 0.469049] nv-tegra-mc 2c10000.mc: No mssnvlink node
  196. [ 0.469097] mc-err: mcerr ops are set to t18x
  197. [ 0.469260] dram-ecc: DRAM ECC disabled-MC_ECC_CONTROL:0x0000000c
  198. [ 0.470427] iommu: Adding device 3530000.xhci to group 44
  199. [ 0.470451] arm-smmu: forcing sodev map for 3530000.xhci
  200. [ 0.470923] iommu: Adding device 3550000.xudc to group 45
  201. [ 0.470947] arm-smmu: forcing sodev map for 3550000.xudc
  202. [ 0.471662] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3
  203. [ 0.471681] tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256
  204. [ 0.472268] iommu: Adding device 17000000.gp10b to group 46
  205. [ 0.473393] tegra-reset 5000000.clock: registered 193 resets.
  206. [ 0.475741] iommu: Adding device d000000.bpmp to group 47
  207. [ 0.475968] bpmp: ping status is 0
  208. [ 0.476076] bpmp d000000.bpmp: firmware tag is 69fa4e41a01fc02a4db1adf71922a54c
  209. [ 0.478634] bpmp d000000.bpmp: probe ok
  210. [ 0.481974] iommu: Adding device 2600000.dma to group 48
  211. [ 0.483257] GPIO line 461 (camera-control-output-low) hogged as output/low
  212. [ 0.483296] GPIO line 456 (camera-control-output-low) hogged as output/low
  213. [ 0.483330] GPIO line 457 (camera-control-output-low) hogged as output/low
  214. [ 0.483363] GPIO line 426 (camera-control-output-low) hogged as output/low
  215. [ 0.483398] GPIO line 424 (wifi-enable) hogged as output/high
  216. [ 0.483435] GPIO line 445 (sdmmc-wake-support-input) hogged as input
  217. [ 0.483469] GPIO line 446 (sdmmc-wake-support-output) hogged as output/low
  218. [ 0.483676] gpiochip_setup_dev: registered GPIOs 320 to 511 on device: gpiochip0 (tegra-gpio)
  219. [ 0.487483] GPIO line 315 (wifi-wake-ap) hogged as input
  220. [ 0.487663] gpiochip_setup_dev: registered GPIOs 256 to 319 on device: gpiochip1 (tegra-gpio-aon)
  221. [ 0.489368] iommu: Adding device 10003000.pcie-controller to group 49
  222. [ 0.489397] arm-smmu: forcing sodev map for 10003000.pcie-controller
  223. [ 0.489740] iommu: Adding device sound to group 50
  224. [ 0.490135] iommu: Adding device 3510000.hda to group 51
  225. [ 0.497983] iommu: Adding device c1a0000.aon to group 52
  226. [ 0.498438] vdd-ac-bat: 5000 mV
  227. [ 0.500138] vdd-1v8-ap: 1800 mV
  228. [ 0.517617] random: fast init done
  229. [ 0.525645] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  230. [ 0.528486] eventlib_kernel: keventlib is initialized, test id: 0
  231. [ 0.528696] SCSI subsystem initialized
  232. [ 0.528827] libata version 3.00 loaded.
  233. [ 0.528968] usbcore: registered new interface driver usbfs
  234. [ 0.529017] usbcore: registered new interface driver hub
  235. [ 0.529095] usbcore: registered new device driver usb
  236. [ 0.540127] max77620 4-003c: PMIC Version OTP:0x45 and ES:0x8
  237. [ 0.545803] vddio-ddr: at 1125 mV
  238. [ 0.549628] avdd_dsi_csi: 1200 mV
  239. [ 0.553451] vdd-1v8: 1800 mV
  240. [ 0.557449] vdd-3v3-sys: 3300 mV
  241. [ 0.558608] spmic-ldo0: at 1800 mV
  242. [ 0.559332] spmic-ldo1: at 800 mV
  243. [ 0.561452] vddio-3v3: 3300 mV
  244. [ 0.562073] vddio-sdmmc1: 1800 <--> 3300 mV at 3300 mV
  245. [ 0.565451] vdd-rtc: at 800 mV
  246. [ 0.566198] avdd-ts-hv: 1800 <--> 3300 mV at 1800 mV
  247. [ 0.569450] spmic-ldo6: at 1500 mV
  248. [ 0.573447] vdd-pex-1v00: 1000 mV
  249. [ 0.574086] dvdd-pex: 1000 mV
  250. [ 0.574580] GPIO line 253 (spmic_gpio_input) hogged as input
  251. [ 0.574742] GPIO line 254 (spmic_gpio_input) hogged as input
  252. [ 0.574938] gpiochip_setup_dev: registered GPIOs 248 to 255 on device: gpiochip2 (max77620-gpio)
  253. [ 0.576897] max77620 4-003c: max77620 probe successful
  254. [ 0.577263] media: Linux media interface: v0.10
  255. [ 0.577306] Linux video capture interface: v2.00
  256. [ 0.580947] pps_core: LinuxPPS API ver. 1 registered
  257. [ 0.580963] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  258. [ 0.580989] PTP clock support registered
  259. [ 0.581360] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec
  260. [ 0.581401] tegra_wdt_t18x 30c0000.watchdog: Registered successfully
  261. [ 0.583907] tegra_fiq_debugger_init: found FIQ source (IRQ 386)
  262. [ 0.588058] Advanced Linux Sound Architecture Driver Initialized.
  263. [ 0.588402] Bluetooth: Core ver 2.22
  264. [ 0.588443] NET: Registered protocol family 31
  265. [ 0.588457] Bluetooth: HCI device and connection manager initialized
  266. [ 0.588475] Bluetooth: HCI socket layer initialized
  267. [ 0.588490] Bluetooth: L2CAP socket layer initialized
  268. [ 0.588513] Bluetooth: SCO socket layer initialized
  269. [ 0.589242] en-vdd-sd: 3300 mV
  270. [ 0.589662] vdd-usb0-5v: 5000 mV
  271. [ 0.589951] vdd-usb1-5v: 5000 mV
  272. [ 0.590458] vdd-3v3: 3300 mV
  273. [ 0.590711] en-vdd-vcm-2v8: 2800 mV
  274. [ 0.590963] vdd-sys-bl: 3300 mV
  275. [ 0.593064] camchar: rtcpu character device driver loaded
  276. [ 0.593598] gpio tegra-gpio wake53 for gpio=159(X:7)
  277. [ 0.595647] extcon-gpio-states external-connection:extcon@1: Cable state:0, cable id:0
  278. [ 0.597276] clocksource: Switched to clocksource arch_sys_counter
  279. [ 0.638832] VFS: Disk quotas dquot_6.6.0
  280. [ 0.639089] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  281. [ 0.640644] tegra-pcie 10003000.pcie-controller: 4x1, 1x1 configuration
  282. [ 0.642041] nvmap_heap_init: nvmap_heap_init: created heap block cache
  283. [ 0.643095] nvmap: nvmap_select_cache_ops() nvmap cache ops set to roc
  284. [ 0.643133] nvmap_page_pool_init: Total RAM pages: 2010088
  285. [ 0.643164] nvmap_page_pool_init: nvmap page pool size: 251261 pages (981 MB)
  286. [ 0.643284] tegra-pcie 10003000.pcie-controller: PCIE: Enable power rails
  287. [ 0.643382] nvmap_background_zero_thread: PP zeroing thread starting.
  288. [ 0.643895] tegra-pcie 10003000.pcie-controller: probing port 0, using 4 lanes
  289. [ 0.646316] tegra-pcie 10003000.pcie-controller: probing port 2, using 1 lanes
  290. [ 0.647985] tegra-gpcdma 2600000.dma: GPC DMA driver register 32 channels
  291. [ 0.658986] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type BCPU-therm
  292. [ 0.659322] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type MCPU-therm
  293. [ 0.659878] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm
  294. [ 0.660021] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm
  295. [ 0.660217] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type Tboard_tegra
  296. [ 0.660428] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type Tdiode_tegra
  297. [ 0.660670] thermal thermal_zone6: Registering thermal zone thermal_zone6 for type PMIC-Die
  298. [ 0.660957] la/ptsa driver initialized.
  299. [ 0.660998] pre_t19x_iso_plat_init(): iso emc max clk=1866000KHz
  300. [ 0.661026] pre_t19x_iso_plat_init(): max_iso_bw=26870400KB
  301. [ 0.662220] NET: Registered protocol family 2
  302. [ 0.664271] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
  303. [ 0.664955] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
  304. [ 0.665805] TCP: Hash tables configured (established 65536 bind 65536)
  305. [ 0.665880] UDP hash table entries: 4096 (order: 5, 131072 bytes)
  306. [ 0.666035] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
  307. [ 0.666916] NET: Registered protocol family 1
  308. [ 0.668011] RPC: Registered named UNIX socket transport module.
  309. [ 0.668043] RPC: Registered udp transport module.
  310. [ 0.668069] RPC: Registered tcp transport module.
  311. [ 0.668094] RPC: Registered tcp NFSv4.1 backchannel transport module.
  312. [ 0.668615] tegra-i2c 3160000.i2c: no acknowledge from address 0x74
  313. [ 0.668707] pca953x 0-0074: failed reading register
  314. [ 0.668793] pca953x: probe of 0-0074 failed with error -121
  315. [ 0.669060] tegra-i2c 3160000.i2c: no acknowledge from address 0x77
  316. [ 0.669121] pca953x 0-0077: failed reading register
  317. [ 0.669220] pca953x: probe of 0-0077 failed with error -121
  318. [ 0.669383] PCI: CLS 0 bytes, default 64
  319. [ 0.669624] Trying to unpack rootfs image as initramfs...
  320. [ 0.692383] host1x 13e10000.host1x: initialized
  321. [ 0.693962] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
  322. [ 0.699078] audit: initializing netlink subsys (disabled)
  323. [ 0.699145] audit: type=2000 audit(0.584:1): initialized
  324. [ 0.699906] workingset: timestamp_bits=46 max_order=21 bucket_order=0
  325. [ 0.713164] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  326. [ 0.715891] ntfs: driver 2.1.32 [Flags: R/W].
  327. [ 0.717559] 9p: Installing v9fs 9p2000 file system support
  328. [ 0.722498] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240)
  329. [ 0.722674] io scheduler noop registered
  330. [ 0.723314] io scheduler cfq registered (default)
  331. [ 0.728386] gic 2a41000.agic-controller: GIC IRQ controller registered
  332. [ 0.734879] iommu: Adding device aconnect@2a41000:adsp_audio to group 53
  333. [ 0.755502] iommu: Adding device 2993000.adsp to group 54
  334. [ 0.756596] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered
  335. [ 0.760049] tegra-xusb-padctl 3520000.xusb_padctl: VBUS over-current detection enabled
  336. [ 0.764271] tegra-pwm 3280000.pwm: PWM clk can sleep in ops
  337. [ 0.765801] tegra-pwm 3290000.pwm: PWM clk can sleep in ops
  338. [ 0.767130] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops
  339. [ 0.768453] tegra-pwm c340000.pwm: PWM clk can sleep in ops
  340. [ 0.771210] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe
  341. [ 0.771430] misc tegra_camera_ctrl: tegra_camera_isomgr_register tpg_max_iso = 3916800KBs
  342. [ 0.771498] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=4687500, vi_iso_bw=2000000, max_bw=4687500
  343. [ 0.775969] tsec 15500000.tsec: initialized
  344. [ 0.777306] tsec 15100000.tsecb: initialized
  345. [ 0.781806] nvdec 15480000.nvdec: initialized
  346. [ 0.789726] falcon 15340000.vic: initialized
  347. [ 0.791469] falcon 154c0000.nvenc: initialized
  348. [ 0.792935] falcon 15380000.nvjpg: initialized
  349. [ 0.796919] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56)
  350. [ 0.798644] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57)
  351. [ 0.800222] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58)
  352. [ 0.801837] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59)
  353. [ 0.803395] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60)
  354. [ 0.804954] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61)
  355. [ 0.806500] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62)
  356. [ 0.808031] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63)
  357. [ 0.811642] tegradccommon 15200000.dc_common: host1x channel mapped
  358. [ 0.811691] tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated
  359. [ 0.811754] tegradccommon 15200000.dc_common: dma mapping done
  360. [ 0.814294] tegradc 15210000.nvdisplay: disp0 connected to head1->/host1x/sor1
  361. [ 0.814460] generic_infoframe_type: 0x87
  362. [ 0.814625] tegradc 15210000.nvdisplay: DT parsed successfully
  363. [ 0.814680] tegradc 15210000.nvdisplay: Display dc.ffffff800b610000 registered with id=0
  364. [ 0.824260] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 16727000 KB/s
  365. [ 0.824333] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 665600000 Hz
  366. [ 0.824375] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 357620000 Hz
  367. [ 0.824695] tegradc 15210000.nvdisplay: vblank syncpt # 8 for dc 1
  368. [ 0.824732] tegradc 15210000.nvdisplay: vpulse3 syncpt # 9 for dc 1
  369. [ 0.825901] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 10 channels
  370. [ 0.826343] tegradc 15210000.nvdisplay: dc_hdmi_hotplug_init: couldn't get regulator vdd_hdmi_5v0, -517
  371. [ 0.826831] tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized
  372. [ 0.827829] kfuse 3830000.kfuse: initialized
  373. [ 0.829840] tegradc 15210000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board
  374. [ 0.829869] tegradc 15210000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed
  375. [ 0.830414] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0
  376. [ 0.833995] tegradc 15210000.nvdisplay: probed
  377. [ 0.836720] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  378. [ 0.840090] console [ttyS0] disabled
  379. [ 0.840196] 3100000.serial: ttyS0 at MMIO 0x3100000 (irq = 36, base_baud = 25500000) is a Tegra
  380. [ 1.074339] tegra-pcie 10003000.pcie-controller: link 0 down, retrying
  381. [ 1.482604] tegra-pcie 10003000.pcie-controller: link 0 down, retrying
  382. [ 1.891005] tegra-pcie 10003000.pcie-controller: link 0 down, retrying
  383. [ 1.893044] tegra-pcie 10003000.pcie-controller: link 0 down, ignoring
  384. [ 2.299689] tegra-pcie 10003000.pcie-controller: link 2 down, retrying
  385. [ 2.707742] tegra-pcie 10003000.pcie-controller: link 2 down, retrying
  386. [ 3.103930] console [ttyS0] enabled
  387. [ 3.104640] Console: switching to colour frame buffer device 80x30
  388. [ 3.110014] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 37, base_baud = 0) is a TEGRA_UART
  389. [ 3.114404] c280000.serial: ttyTHS2 at MMIO 0xc280000 (irq = 38, base_baud = 0) is a TEGRA_UART
  390. [ 3.123466] serial-tegra 3130000.serial: RX in PIO mode
  391. [ 3.124487] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 39, base_baud = 0) is a TEGRA_UART
  392. [ 3.133257] [drm] Initialized
  393. [ 3.149300] tegra-pcie 10003000.pcie-controller: link 2 down, retrying
  394. [ 3.156321] tegra-pcie 10003000.pcie-controller: link 2 down, ignoring
  395. [ 3.156333] tegra-pcie 10003000.pcie-controller: PCIE: no end points detected
  396. [ 3.159247] brd: module loaded
  397. [ 3.169531] loop: module loaded
  398. [ 3.169601] tegra_profiler: version: 1.132, samples/io: 46/26
  399. [ 3.169725] tegra_profiler: auth: init
  400. [ 3.170082] nct1008_nct72 7-004c: starting parse dt
  401. [ 3.170176] nct1008_nct72 7-004c: !!!Found deprecated property!!!
  402. [ 3.170182] nct1008_nct72 7-004c: success parsing dt
  403. [ 3.170284] nct1008_nct72 7-004c: success in enabling tmp451 VDD rail
  404. [ 3.170333] tegra-pcie 10003000.pcie-controller: PCIE: Disable power rails
  405. [ 3.170661] THERMAL EST: found 3 subdevs
  406. [ 3.170665] THERMAL EST num_resources: 0
  407. [ 3.170669] [THERMAL EST subdev 0]
  408. [ 3.170673] [THERMAL EST subdev 1]
  409. [ 3.170677] [THERMAL EST subdev 2]
  410. [ 3.170977] thermal thermal_zone7: Registering thermal zone thermal_zone7 for type thermal-fan-est
  411. [ 3.170979] THERMAL EST: thz register success.
  412. [ 3.175275] THERMAL EST: end of probe, return err: 0
  413. [ 3.176246] hisi_sas: driver version v1.6
  414. [ 3.189117] tegra-ahci 3507000.ahci-sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode
  415. [ 3.189128] tegra-ahci 3507000.ahci-sata: flags: 64bit ncq sntf pm led pmp pio slum part deso sadm apst
  416. [ 3.190479] scsi host0: tegra_ahci
  417. [ 3.191489] scsi host1: tegra_ahci
  418. [ 3.191774] ata1: SATA max UDMA/133 mmio [mem 0x03507000-0x03508fff] port 0x100 irq 24
  419. [ 3.191778] ata2: DUMMY
  420. [ 3.199360] libphy: Fixed MDIO Bus: probed
  421. [ 3.201994] tun: Universal TUN/TAP device driver, 1.6
  422. [ 3.201997] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  423. [ 3.202547] nct1008_nct72 7-004c: LOC shutdown limit 107
  424. [ 3.202825] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
  425. [ 3.202827] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  426. [ 3.202911] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
  427. [ 3.202913] igb: Copyright (c) 2007-2014 Intel Corporation.
  428. [ 3.203001] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
  429. [ 3.203003] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
  430. [ 3.203050] nct1008_nct72 7-004c: EXT shutdown limit 107
  431. [ 3.203088] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4
  432. [ 3.203090] Copyright(c) 1999 - 2017 Intel Corporation.
  433. [ 3.205490] eqos 2490000.ether_qos: no PHY interrupt found
  434. [ 3.205813] eqos 2490000.ether_qos: can't get pllrefe_vcoout clk (-2)
  435. [ 3.209659] eqos 2490000.ether_qos: Setting local MAC: 0 4 4b c5 e3 30
  436. [ 3.209855] libphy: dwc_phy: probed
  437. [ 3.210310] bcm54xx_low_power_mode(): put phy in iddq-lp mode
  438. [ 3.213171] PPP generic driver version 2.4.2
  439. [ 3.213492] PPP BSD Compression module registered
  440. [ 3.213495] PPP Deflate Compression module registered
  441. [ 3.213517] PPP MPPE Compression module registered
  442. [ 3.213521] NET: Registered protocol family 24
  443. [ 3.213623] usbcore: registered new interface driver r8152
  444. [ 3.213710] usbcore: registered new interface driver asix
  445. [ 3.213787] usbcore: registered new interface driver ax88179_178a
  446. [ 3.213866] usbcore: registered new interface driver cdc_ether
  447. [ 3.213942] usbcore: registered new interface driver net1080
  448. [ 3.214018] usbcore: registered new interface driver cdc_subset
  449. [ 3.214101] usbcore: registered new interface driver zaurus
  450. [ 3.214191] usbcore: registered new interface driver cdc_ncm
  451. [ 3.214982] VFIO - User Level meta-driver version: 0.3
  452. [ 3.216863] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  453. [ 3.216880] ehci-pci: EHCI PCI platform driver
  454. [ 3.216964] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  455. [ 3.216974] ohci-pci: OHCI PCI platform driver
  456. [ 3.217054] ohci-platform: OHCI generic platform driver
  457. [ 3.223311] tegra-xusb 3530000.xhci: USB2 port 0 has OTG_CAP
  458. [ 3.225229] tegra-xusb 3530000.xhci: extcon 0: ffffffc1ead29000 id
  459. [ 3.225404] tegra-xusb 3530000.xhci: Direct firmware load for tegra18x_xusb_firmware failed with error -2
  460. [ 3.225409] tegra-xusb 3530000.xhci: Falling back to user helper
  461. [ 3.225958] usbcore: registered new interface driver uas
  462. [ 3.226058] usbcore: registered new interface driver usb-storage
  463. [ 3.226261] usbcore: registered new interface driver usbserial
  464. [ 3.231519] tegra-xudc-new 3550000.xudc: device count: 1
  465. [ 3.232841] tegra-xudc-new 3550000.xudc: vbus state: 0
  466. [ 3.232920] tegra-xudc-new 3550000.xudc: entering ELPG
  467. [ 3.234288] tegra-xudc-new 3550000.xudc: entering ELPG done
  468. [ 3.234731] mousedev: PS/2 mouse device common for all mice
  469. [ 3.234822] usbcore: registered new interface driver xpad
  470. [ 3.236839] nct1008_nct72 7-004c: initial LOC temp: 28000
  471. [ 3.237140] nct1008_nct72 7-004c: initial EXT temp: 38750
  472. [ 3.237739] nct1008_nct72 7-004c: hi_b:-11, lo_b:0
  473. [ 3.238076] gpio tegra-gpio-aon wake35 for gpio=16(V:0)
  474. [ 3.238252] nct1008_nct72 7-004c: nct1008_probe: initialized
  475. [ 3.347088] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0
  476. [ 3.348296] Wake73 for irq=42
  477. [ 3.349712] rtc rtc1: alarm rtc device
  478. [ 3.349726] tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1
  479. [ 3.349751] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock
  480. [ 3.349955] i2c /dev entries driver
  481. [ 3.353742] max77620-power max77620-power: Event recorder REG_NVERC : 0x0
  482. [ 3.358149] tegra-bpmp-thermal d000000.bpmp:bpmpthermal: zone 0 not supported
  483. [ 3.358781] tegra-bpmp-thermal d000000.bpmp:bpmpthermal: zone 3 not supported
  484. [ 3.360321] parse_throttle_dt_data: Num cap clks = 4
  485. [ 3.360326] parse_throttle_dt_data: clk=mcpu type=1
  486. [ 3.360329] parse_throttle_dt_data: clk=bcpu type=2
  487. [ 3.360336] parse_throttle_dt_data: clk=gpu type=4
  488. [ 3.360338] parse_throttle_dt_data: clk=emc type=3
  489. [ 3.361566] tegra_throttle_probe: probe successful. #cdevs=4
  490. [ 3.362137] FAN: coudln't get the regulator
  491. [ 3.364548] device-mapper: uevent: version 1.0.3
  492. [ 3.365504] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
  493. [ 3.372835] cpufreq: platform driver Initialization: pass
  494. [ 3.374896] cpuidle: Initializing cpuidle driver init for Denver cluster
  495. [ 3.375014] cpuidle: Initializing cpuidle driver init for A57 cluster
  496. [ 3.382261] sdhci: Secure Digital Host Controller Interface driver
  497. [ 3.382263] sdhci: Copyright(c) Pierre Ossman
  498. [ 3.382265] sdhci-pltfm: SDHCI platform and OF driver helper
  499. [ 3.383838] sdhci-tegra 3460000.sdhci: Client registration for eMC Successful
  500. [ 3.385769] CMDQ: cmdq_platfm_init successful
  501. [ 3.387005] CQE: CMD_TIMING bit set for R1B DCMD
  502. [ 3.390910] sdhci-tegra 3440000.sdhci: Client registration for eMC Successful
  503. [ 3.396561] sdhci-tegra 3400000.sdhci: Got CD GPIO
  504. [ 3.396610] sdhci-tegra 3400000.sdhci: Got WP GPIO
  505. [ 3.397882] sdhci-tegra 3400000.sdhci: Client registration for eMC Successful
  506. [ 3.399576] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 257
  507. [ 3.403227] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete
  508. [ 3.429292] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr
  509. [ 3.441290] mmc1: SDHCI controller on 3440000.sdhci [3440000.sdhci] using ADMA 64-bit with 64 bit addr
  510. [ 3.449355] gpio tegra-gpio wake71 for gpio=125(P:5)
  511. [ 3.449397] mmc2: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit with 64 bit addr
  512. [ 3.494807] mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1
  513. [ 3.507577] ata1: SATA link down (SStatus 0 SControl 300)
  514. [ 3.508288] mmc0: periodic cache flush enabled
  515. [ 3.508302] mmc0: new HS400 Enhanced strobe MMC card at address 0001
  516. [ 3.508992] mmcblk0: mmc0:0001 032G34 29.1 GiB
  517. [ 3.509206] mmcblk0boot0: mmc0:0001 032G34 partition 1 4.00 MiB
  518. [ 3.509494] mmcblk0boot1: mmc0:0001 032G34 partition 2 4.00 MiB
  519. [ 3.509746] mmcblk0rpmb: mmc0:0001 032G34 partition 3 4.00 MiB
  520. [ 3.512434] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31
  521. [ 3.693915] mmc1: hw tuning done ...
  522. [ 3.701285] mmc1: new ultra high speed SDR104 SDIO card at address 0001
  523. [ 3.889581] tegradc 15210000.nvdisplay: fb registered
  524. [ 3.895021] gpio tegra-gpio wake21 for gpio=121(P:1)
  525. [ 3.901181] tegra-se-nvhost 15810000.se: initialized
  526. [ 3.907270] tegra-se-nvhost 15810000.se: tegra_se_probe: complete
  527. [ 3.914318] tegra-se-nvhost 15820000.se: initialized
  528. [ 3.920482] tegra-se-nvhost 15820000.se: tegra_se_probe: complete
  529. [ 3.927612] tegra-se-nvhost 15830000.se: initialized
  530. [ 3.933237] tegra-se-nvhost 15830000.se: tegra_se_probe: complete
  531. [ 3.940260] tegra-se-nvhost 15840000.se: initialized
  532. [ 3.946308] tegra-se-nvhost 15840000.se: tegra_se_probe: complete
  533. [ 3.952743] hidraw: raw HID events driver (C) Jiri Kosina
  534. [ 3.959375] usbcore: registered new interface driver usbhid
  535. [ 3.964986] usbhid: USB HID core driver
  536. [ 3.971044] tegra-i2c 3160000.i2c: no acknowledge from address 0x42
  537. [ 3.977427] ina3221x 0-0042: ina3221 reset failure status: 0xffffff87
  538. [ 3.984092] ina3221x: probe of 0-0042 failed with error -121
  539. [ 3.990145] tegra-i2c 3160000.i2c: no acknowledge from address 0x43
  540. [ 3.996466] ina3221x 0-0043: ina3221 reset failure status: 0xffffff87
  541. [ 4.003124] ina3221x: probe of 0-0043 failed with error -121
  542. [ 4.011863] tegra186-cam-rtcpu b000000.rtcpu: Trace buffer configured at IOVA=0xbff00000
  543. [ 4.023032] tegra-ivc ivc-b000000.rtcpu: region 0: iova=0xbfef0000-0xbfefdb7f size=56192
  544. [ 4.031547] tegra-ivc ivc-b000000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900
  545. [ 4.042115] tegra-ivc ivc-b000000.rtcpu:i2c@480: i2c: ver=0 grp=1 RX[8x128]=0x1900-0x1d80 TX[8x128]=0x1d80-0x2200
  546. [ 4.052846] tegra-ivc ivc-b000000.rtcpu:vinotify@12c0: vinotify: ver=0 grp=1 RX[64x128]=0x2200-0x4280 TX[64x128]=0x4280-0x6300
  547. [ 4.065571] tegra-ivc ivc-b000000.rtcpu:mods@32c0: mods: ver=0 grp=1 RX[1x64]=0x6300-0x63c0 TX[1x64]=0x63c0-0x6480
  548. [ 4.076069] tegra-ivc ivc-b000000.rtcpu:ivccontrol@52c0: ivccontrol: ver=0 grp=1 RX[16x320]=0x6480-0x7900 TX[16x320]=0x7900-0x8d80
  549. [ 4.087906] tegra-ivc ivc-b000000.rtcpu:ivccapture@72c0: ivccapture: ver=0 grp=1 RX[16x64]=0x8d80-0x9200 TX[16x64]=0x9200-0x9680
  550. [ 4.099569] tegra-ivc ivc-b000000.rtcpu:dbg@7c00: dbg: ver=0 grp=1 RX[1x384]=0x9680-0x9880 TX[1x384]=0x9880-0x9a80
  551. [ 4.110152] tegra-ivc ivc-b000000.rtcpu:dbg@7e00: dbg: ver=0 grp=1 RX[1x8192]=0x9a80-0xbb00 TX[1x8192]=0xbb00-0xdb80
  552. [ 4.121326] tegra186-cam-rtcpu b000000.rtcpu: using cam RTCPU IRQ (51)
  553. [ 4.127877] tegra186-cam-rtcpu b000000.rtcpu: tegra_camrtc_mon_create is successful
  554. [ 4.136463] tegra186-cam-rtcpu b000000.rtcpu: firmware version cpu=sce cmd=5 sha1=3ecb1dca25fa98771f988f238c025334776c9a96
  555. [ 4.149087] tegra_aon c1a0000.aon: tegra aon driver probe OK
  556. [ 4.155390] tegra186-aondbg aondbg: aondbg driver probe() OK
  557. [ 4.161289] register_ari_mca_banks: Registered MCA ROC:IOB
  558. [ 4.166871] register_ari_mca_banks: Registered MCA ROC:CCE
  559. [ 4.172815] tegra18-bridge 2390000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds
  560. [ 4.181623] tegra18-bridge 2390000.axi2apb: enabled timeout = 11155000
  561. [ 4.188158] tegra18-bridge 2390000.axi2apb: bridge probed OK
  562. [ 4.193923] tegra18-bridge 23a0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds
  563. [ 4.202718] tegra18-bridge 23a0000.axi2apb: enabled timeout = 11155000
  564. [ 4.209274] tegra18-bridge 23a0000.axi2apb: bridge probed OK
  565. [ 4.215002] tegra18-bridge 23b0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds
  566. [ 4.223805] tegra18-bridge 23b0000.axi2apb: enabled timeout = 11155000
  567. [ 4.230342] tegra18-bridge 23b0000.axi2apb: bridge probed OK
  568. [ 4.236080] tegra18-bridge 23c0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds
  569. [ 4.244875] tegra18-bridge 23c0000.axi2apb: enabled timeout = 11155000
  570. [ 4.251407] tegra18-bridge 23c0000.axi2apb: bridge probed OK
  571. [ 4.257132] tegra18-bridge 23d0000.axi2apb: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds
  572. [ 4.265946] tegra18-bridge 23d0000.axi2apb: enabled timeout = 11155000
  573. [ 4.272481] tegra18-bridge 23d0000.axi2apb: bridge probed OK
  574. [ 4.278206] tegra18-bridge 2100000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds
  575. [ 4.286913] tegra18-bridge 2100000.axip2p: enabled timeout = 11155000
  576. [ 4.293360] tegra18-bridge 2100000.axip2p: bridge probed OK
  577. [ 4.299003] tegra18-bridge 2110000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds
  578. [ 4.307714] tegra18-bridge 2110000.axip2p: enabled timeout = 11155000
  579. [ 4.314162] tegra18-bridge 2110000.axip2p: bridge probed OK
  580. [ 4.319805] tegra18-bridge 2120000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds
  581. [ 4.328516] tegra18-bridge 2120000.axip2p: enabled timeout = 11155000
  582. [ 4.334970] tegra18-bridge 2120000.axip2p: bridge probed OK
  583. [ 4.340613] tegra18-bridge 2130000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds
  584. [ 4.349322] tegra18-bridge 2130000.axip2p: enabled timeout = 11155000
  585. [ 4.355769] tegra18-bridge 2130000.axip2p: bridge probed OK
  586. [ 4.361422] tegra18-bridge 2140000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds
  587. [ 4.370129] tegra18-bridge 2140000.axip2p: enabled timeout = 11155000
  588. [ 4.376575] tegra18-bridge 2140000.axip2p: bridge probed OK
  589. [ 4.382213] tegra18-bridge 2150000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds
  590. [ 4.390922] tegra18-bridge 2150000.axip2p: enabled timeout = 11155000
  591. [ 4.397368] tegra18-bridge 2150000.axip2p: bridge probed OK
  592. [ 4.403005] tegra18-bridge 2160000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds
  593. [ 4.411713] tegra18-bridge 2160000.axip2p: enabled timeout = 11155000
  594. [ 4.418159] tegra18-bridge 2160000.axip2p: bridge probed OK
  595. [ 4.423798] tegra18-bridge 2170000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds
  596. [ 4.432507] tegra18-bridge 2170000.axip2p: enabled timeout = 11155000
  597. [ 4.438954] tegra18-bridge 2170000.axip2p: bridge probed OK
  598. [ 4.444599] tegra18-bridge 2180000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds
  599. [ 4.453311] tegra18-bridge 2180000.axip2p: enabled timeout = 11155000
  600. [ 4.459755] tegra18-bridge 2180000.axip2p: bridge probed OK
  601. [ 4.465398] tegra18-bridge 2190000.axip2p: axi_cbb clk rate = 115 MHZ, timeout = 97000 useconds
  602. [ 4.474106] tegra18-bridge 2190000.axip2p: enabled timeout = 11155000
  603. [ 4.480552] tegra18-bridge 2190000.axip2p: bridge probed OK
  604. [ 4.486202] tegra18_a57_serr_init: on CPU 2 a Denver Core
  605. [ 4.491698] tegra18x_actmon d230000.actmon: in actmon_register()...
  606. [ 4.498722] tegra18x_actmon d230000.actmon: initialization Completed for the device mc_all
  607. [ 4.507513] hw perfevents: enabled with denver15_uncore_pmu PMU driver, 3 counters available
  608. [ 4.516080] denver_knobs_init:MTS_VERSION:43068234
  609. [ 4.522669] nvpmodel: initialized successfully
  610. [ 4.530220] usbcore: registered new interface driver snd-usb-audio
  611. [ 4.544398] input: tegra-hda HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0
  612. [ 4.552898] input: tegra-hda HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1
  613. [ 4.631840] OPE platform probe
  614. [ 4.635071] OPE platform probe successful
  615. [ 4.652691] tegra-asoc: sound: This is a dummy codec
  616. [ 4.719077] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok
  617. [ 4.724988] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok
  618. [ 4.730850] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok
  619. [ 4.736712] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok
  620. [ 4.742630] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok
  621. [ 4.748496] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok
  622. [ 4.754372] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok
  623. [ 4.760253] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok
  624. [ 4.766125] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok
  625. [ 4.771989] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok
  626. [ 4.778028] tegra-asoc: sound: ADMAIF11 <-> ADMAIF11 mapping ok
  627. [ 4.784075] tegra-asoc: sound: ADMAIF12 <-> ADMAIF12 mapping ok
  628. [ 4.790111] tegra-asoc: sound: ADMAIF13 <-> ADMAIF13 mapping ok
  629. [ 4.796145] tegra-asoc: sound: ADMAIF14 <-> ADMAIF14 mapping ok
  630. [ 4.802227] tegra-asoc: sound: ADMAIF15 <-> ADMAIF15 mapping ok
  631. [ 4.808268] tegra-asoc: sound: ADMAIF16 <-> ADMAIF16 mapping ok
  632. [ 4.814302] tegra-asoc: sound: ADMAIF17 <-> ADMAIF17 mapping ok
  633. [ 4.820349] tegra-asoc: sound: ADMAIF18 <-> ADMAIF18 mapping ok
  634. [ 4.826396] tegra-asoc: sound: ADMAIF19 <-> ADMAIF19 mapping ok
  635. [ 4.832428] tegra-asoc: sound: ADMAIF20 <-> ADMAIF20 mapping ok
  636. [ 4.879971] u32 classifier
  637. [ 4.882723] Actions configured
  638. [ 4.886233] Initializing XFRM netlink socket
  639. [ 4.892197] NET: Registered protocol family 10
  640. [ 4.898024] NET: Registered protocol family 17
  641. [ 4.902503] NET: Registered protocol family 15
  642. [ 4.907222] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  643. [ 4.920328] Bluetooth: RFCOMM socket layer initialized
  644. [ 4.925498] Bluetooth: RFCOMM ver 1.11
  645. [ 4.929248] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  646. [ 4.935187] Bluetooth: HIDP socket layer initialized
  647. [ 4.940196] 9pnet: Installing 9P2000 support
  648. [ 4.944544] Key type dns_resolver registered
  649. [ 4.949130] Registered cp15_barrier emulation handler
  650. [ 4.954210] Registered setend emulation handler
  651. [ 4.960170] registered taskstats version 1
  652. [ 4.968640] isp 15600000.isp: initialized
  653. [ 4.977837] nvcsi 150c0000.nvcsi: initialized
  654. [ 4.990223] gpio tegra-gpio-aon wake29 for gpio=56(FF:0)
  655. [ 4.990296] tegra-vi4 15700000.vi: initialized
  656. [ 4.991215] tegra-vi4 15700000.vi: ep of_device is not enabled /host1x/vi@15700000/ports/port@0/endpoint.
  657. [ 4.991218] tegra-vi4 15700000.vi: ep of_device is not enabled /host1x/vi@15700000/ports/port@1/endpoint.
  658. [ 5.019247] gpio tegra-gpio-aon wake67 for gpio=57(FF:1)
  659. [ 5.024656] gpio tegra-gpio-aon wake68 for gpio=58(FF:2)
  660. [ 5.030164] input: gpio-keys as /devices/gpio-keys/input/input2
  661. [ 5.062323] tegra_rtc c2a0000.rtc: setting system clock to 2019-06-27 07:52:54 UTC (1561621974)
  662. [ 5.072546] mmcblk mmc0:0001: Card claimed for testing.
  663. [ 5.113046] bpmp: mounted debugfs mirror
  664. [ 5.119074] bwmgr: missing cdev-type property
  665. [ 5.129975] spmic-ldo0: disabling
  666. [ 5.133565] spmic-ldo1: disabling
  667. [ 5.137057] en-vdd-sd: disabling
  668. [ 5.140307] vdd-usb0-5v: disabling
  669. [ 5.143730] vdd-usb1-5v: disabling
  670. [ 5.147145] vdd-3v3: disabling
  671. [ 5.150210] en-vdd-vcm-2v8: disabling
  672. [ 5.153887] vdd-sys-bl: disabling
  673. [ 5.157198] ALSA device list:
  674. [ 5.160177] #0: tegra-hda at 0x3518000 irq 383
  675. [ 5.164806] #1: tegra-snd-t186ref-mobile-rt565x
  676. [ 5.497483] EXT4-fs (mmcblk0p1): 16 orphan inodes deleted
  677. [ 5.502919] EXT4-fs (mmcblk0p1): recovery complete
  678. [ 5.513142] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
  679. [ 5.521349] VFS: Mounted root (ext4 filesystem) on device 179:1.
  680. [ 5.533602] devtmpfs: mounted
  681. [ 5.538523] Freeing unused kernel memory: 8512K
  682. [ 5.744468] ip_tables: (C) 2000-2006 Netfilter Core Team
  683. [ 5.793475] cgroup: cgroup2: unknown option "nsdelegate"
  684. [ 5.821916] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
  685. [ 5.846626] systemd[1]: Detected architecture arm64.
  686. [ 5.940923] systemd[1]: Set hostname to <winmill-hockeybot>.
  687. [ 6.081105] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
  688. [ 6.098262] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
  689. [ 6.264257] systemd[1]: Configuration file /etc/systemd/system/jetson_clocks.service is marked executable. Please remove executable permission bits. Proceeding anyway.
  690. [ 6.279373] systemd[1]: Configuration file /etc/systemd/system/jetson_clocks.service is marked world-writable. Please remove world writability permission bits. Proceeding anyway.
  691. [ 6.352287] random: systemd: uninitialized urandom read (16 bytes read)
  692. [ 6.359775] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  693. [ 6.368094] random: systemd: uninitialized urandom read (16 bytes read)
  694. [ 6.381830] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  695. [ 6.391480] random: systemd: uninitialized urandom read (16 bytes read)
  696. [ 6.401361] systemd[1]: Created slice User and Session Slice.
  697. [ 6.431662] gpio tegra-gpio-aon wake30 for gpio=60(FF:4)
  698. [ 6.474882] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null)
  699. [ 6.657463] systemd-journald[2215]: Received request to flush runtime journal from PID 1
  700. [ 6.685937] systemd-journald[2215]: File /var/log/journal/010a9158921c42eb976c2a92d4b16895/system.journal corrupted or uncleanly shut down, renaming and replacing.
  701. [ 7.108165] random: crng init done
  702. [ 7.111571] random: 7 urandom warning(s) missed due to ratelimiting
  703. [ 7.357594] tegra-xusb 3530000.xhci: cannot find firmware....retry after 1 second
  704. [ 7.569389] tegra-i2c c240000.i2c: no acknowledge from address 0x69
  705. [ 7.575824] bmi160 1-0069: bmi_i2c_rd ERR: 0x00
  706. [ 7.583376] bmi160 1-0069: bmi_init _id_i2c ERR
  707. [ 7.591109] bmi160 1-0069: bmi_remove
  708. [ 7.591112] bmi160 1-0069: bmi_probe done
  709. [ 7.672729] dhd_module_init in
  710. [ 7.672800] found wifi platform device bcmdhd_wlan
  711. [ 7.674588] wifi_platform_get_country_code_map: could not get country_code_map
  712. [ 7.674594] wifi_plat_dev_drv_probe:platform country code map is not available
  713. [ 7.674609] Power-up adapter 'DHD generic adapter'
  714. [ 7.674616] wifi_platform_set_power = 1
  715. [ 7.881431] wifi_platform_bus_enumerate device present 1
  716. [ 7.908875] wifi_platform_bus_enumerate device present 0
  717. [ 7.913428] F1 signature read @0x18000000=0x17214354
  718. [ 7.951004] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x1 pkg:0x2
  719. [ 7.951997] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000
  720. [ 7.952095] wifi_platform_get_mac_addr
  721. [ 7.972258] ids dhd_log_netlink_init
  722. [ 7.976678] wl_event_handler :
  723. [ 7.976683] tsk Enter, tsk = 0xffffffc1dbf81a90
  724. [ 7.976706] wl_create_event_handler(): thread:wl_event_handler:1193 started
  725. [ 7.978547] dhd_attach(): thread:dhd_watchdog_thread:1197 started
  726. [ 7.981124] dhd_attach(): thread:dhd_dpc:1199 started
  727. [ 7.984278] dhd_attach(): thread:dhd_rxf:119e started
  728. [ 7.984287] dhd_deferred_work_init: work queue initialized
  729. [ 7.987382]
  730. Dongle Host Driver, version 1.201.82 (r)
  731. Compiled from
  732. [ 7.988180] Register interface [wlan0] MAC: 00:04:4b:c5:e3:2e
  733.  
  734. [ 7.988185] dhd_prot_ioctl : bus is down. we have nothing to do
  735. [ 7.988376] sdhci-tegra 3440000.sdhci: Tuning done, restoring the best tap value : 66
  736. [ 7.989421] wifi_platform_set_power = 0
  737. [ 8.114845] using random self ethernet address
  738. [ 8.125331] using random host ethernet address
  739. [ 8.156723] Mass Storage Function, version: 2009/09/11
  740. [ 8.156728] LUN: removable file: (no medium)
  741. [ 8.181007] using random self ethernet address
  742. [ 8.181008] using random host ethernet address
  743. [ 8.192012] rndis0: HOST MAC ea:88:4f:99:3d:18
  744. [ 8.192228] rndis0: MAC ea:88:4f:99:3d:19
  745. [ 8.209998] usb0: HOST MAC ea:88:4f:99:3d:1a
  746. [ 8.210026] usb0: MAC ea:88:4f:99:3d:1b
  747. [ 8.210044] tegra-xudc-new 3550000.xudc: exiting ELPG
  748. [ 8.214203] tegra-xudc-new 3550000.xudc: exiting ELPG done
  749. [ 8.214225] tegra-xudc-new 3550000.xudc: ep 0 (type: 0, dir: out) enabled
  750. [ 8.214256] tegra-xudc-new 3550000.xudc: entering ELPG
  751. [ 8.215912] tegra-xudc-new 3550000.xudc: entering ELPG done
  752. [ 8.215932] tegra-xudc-new 3550000.xudc: exiting ELPG
  753. [ 8.220162] tegra-xudc-new 3550000.xudc: exiting ELPG done
  754. [ 8.220186] tegra-xudc-new 3550000.xudc: entering ELPG
  755. [ 8.224051] tegra-xudc-new 3550000.xudc: entering ELPG done
  756. [ 8.251026] l4tbr0: port 1(rndis0) entered blocking state
  757. [ 8.251030] l4tbr0: port 1(rndis0) entered disabled state
  758. [ 8.251192] device rndis0 entered promiscuous mode
  759. [ 8.256511] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready
  760. [ 8.263911] l4tbr0: port 2(usb0) entered blocking state
  761. [ 8.263915] l4tbr0: port 2(usb0) entered disabled state
  762. [ 8.264393] device usb0 entered promiscuous mode
  763. [ 8.270112] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
  764. [ 8.270119] l4tbr0: port 2(usb0) entered blocking state
  765. [ 8.270121] l4tbr0: port 2(usb0) entered forwarding state
  766. [ 8.373331] tegra-xusb 3530000.xhci: Firmware timestamp: 2018-12-26 10:30:04 UTC, Version: 55.12 release
  767. [ 8.401383] tegra-xusb 3530000.xhci: xHCI Host Controller
  768. [ 8.401406] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 1
  769. [ 8.402261] tegra-xusb 3530000.xhci: hcc params 0x0184fd25 hci version 0x100 quirks 0x00050810
  770. [ 8.402298] tegra-xusb 3530000.xhci: irq 70, io mem 0x03530000
  771. [ 8.403232] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  772. [ 8.403239] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  773. [ 8.403242] usb usb1: Product: xHCI Host Controller
  774. [ 8.403245] usb usb1: Manufacturer: Linux 4.9.140-tegra xhci-hcd
  775. [ 8.403248] usb usb1: SerialNumber: 3530000.xhci
  776. [ 8.403784] hub 1-0:1.0: USB hub found
  777. [ 8.403810] hub 1-0:1.0: 4 ports detected
  778. [ 8.404114] tegra-xusb 3530000.xhci: xHCI Host Controller
  779. [ 8.404122] tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 2
  780. [ 8.406631] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
  781. [ 8.406637] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  782. [ 8.406641] usb usb2: Product: xHCI Host Controller
  783. [ 8.406644] usb usb2: Manufacturer: Linux 4.9.140-tegra xhci-hcd
  784. [ 8.406646] usb usb2: SerialNumber: 3530000.xhci
  785. [ 8.407127] hub 2-0:1.0: USB hub found
  786. [ 8.407160] hub 2-0:1.0: 3 ports detected
  787. [ 8.417321] Wake76 for irq=199
  788. [ 8.417327] Wake77 for irq=199
  789. [ 8.417330] Wake78 for irq=199
  790. [ 8.417331] Wake79 for irq=199
  791. [ 8.417333] Wake80 for irq=199
  792. [ 8.417334] Wake81 for irq=199
  793. [ 8.417335] Wake82 for irq=199
  794. [ 9.168677] nvgpu: 17000000.gp10b railgate_enable_store:343 [INFO] railgate is disabled.
  795. [ 9.197390] l4tbr0: port 2(usb0) entered disabled state
  796. [ 9.236434] usb 2-1: new SuperSpeed USB device number 2 using tegra-xusb
  797. [ 9.254431] usb 2-1: New USB device found, idVendor=2b03, idProduct=f582
  798. [ 9.254436] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  799. [ 9.254439] usb 2-1: Product: ZED
  800. [ 9.254441] usb 2-1: Manufacturer: Technologies, Inc.
  801. [ 9.422672] nvgpu: 17000000.gp10b railgate_enable_store:343 [INFO] railgate is disabled.
  802. [ 9.437340] uvcvideo: Found UVC 1.10 device ZED (2b03:f582)
  803. [ 9.452164] uvcvideo 2-1:1.0: Entity type for entity ZED was not initialized!
  804. [ 9.460295] uvcvideo 2-1:1.0: Entity type for entity ZED was not initialized!
  805. [ 9.467636] uvcvideo 2-1:1.0: Entity type for entity Camera 1 was not initialized!
  806. [ 9.475757] input: ZED as /devices/3530000.xhci/usb2/2-1/2-1:1.0/input/input3
  807. [ 9.478216] usbcore: registered new interface driver uvcvideo
  808. [ 9.478220] USB Video Class driver (1.1.1)
  809. [ 9.492743] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  810. [ 9.574188] gpio tegra-gpio wake18 for gpio=101(M:5)
  811. [ 9.576452] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  812. [ 9.614472] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  813. [ 9.614588]
  814.  
  815. Dongle Host Driver, version 1.201.82 (r)
  816. Compiled from
  817. [ 9.614618] wl_android_wifi_on in
  818. [ 9.614622] wifi_platform_set_power = 1
  819. [ 9.687946] nvgpu: 17000000.gp10b railgate_enable_store:343 [INFO] railgate is disabled.
  820. [ 9.828909] vdd-1v8: voltage operation not allowed
  821. [ 9.833946] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1)
  822. [ 9.865481] vdd-1v8: voltage operation not allowed
  823. [ 9.870553] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1)
  824. [ 9.898307] vdd-1v8: voltage operation not allowed
  825. [ 9.903155] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1)
  826. [ 9.912185] vdd-1v8: voltage operation not allowed
  827. [ 9.917045] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1)
  828. [ 10.029173] vdd-1v8: voltage operation not allowed
  829. [ 10.034022] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1)
  830. [ 10.041558] vdd-1v8: voltage operation not allowed
  831. [ 10.046764] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1)
  832. [ 10.055277] vdd-1v8: voltage operation not allowed
  833. [ 10.060409] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1)
  834. [ 10.067367] sdhci-tegra 3440000.sdhci: Tuning done, restoring the best tap value : 66
  835. [ 10.069203] F1 signature read @0x18000000=0x17214354
  836. [ 10.073727] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x1 pkg:0x2
  837. [ 10.074394] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000
  838. [ 10.206562] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
  839. [ 10.268669] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
  840. [ 10.269126] gpio tegra-gpio-aon wake69 for gpio=59(FF:3)
  841. [ 10.269207] gpio tegra-gpio-aon wake69 for gpio=59(FF:3)
  842. [ 10.269210] Enabling wake69
  843. [ 10.271016] wifi_platform_get_mac_addr
  844. [ 10.272965] Firmware up: op_mode=0x0005, MAC=00:04:4b:c5:e3:2e
  845. [ 10.279115] clm path from default:/lib/firmware/brcm/bcmdhd.clm_blob
  846. [ 10.279188] Skipping the clm download. len:0 memblk: (null)
  847. [ 10.281510] dhd_preinit_ioctls pspretend_threshold for HostAPD failed -23
  848. [ 10.288074] Firmware version = wl0: Oct 31 2018 11:34:03 version 7.35.349.66 (r708495 CY) FWID 01-ade683bb
  849. [ 10.290877] dhd_interworking_enable: failed to set WNM info, ret=-23
  850. [ 10.307190] tegradc 15210000.nvdisplay: blank - powerdown
  851. [ 10.438867] CFGP2P-ERROR) wl_cfgp2p_add_p2p_disc_if :
  852. [ 10.438872] P2P interface registered
  853. [ 10.481352] wl_android_wifi_off in
  854. [ 10.484208] dhd_wlfc_deinit():3472, maintain HOST RXRERODER flag in tvl
  855. [ 10.484825] dhdsdio_isr : bus is down. we have nothing to do
  856. [ 10.484897] gpio tegra-gpio-aon wake69 for gpio=59(FF:3)
  857. [ 10.484901] Disabling wake69
  858. [ 10.485022] sdhci-tegra 3440000.sdhci: Tuning done, restoring the best tap value : 66
  859. [ 10.486083] wifi_platform_set_power = 0
  860. [ 10.695308] dhd_prot_ioctl : bus is down. we have nothing to do
  861. [ 10.695321] CFGP2P-ERROR) wl_cfgp2p_set_firm_p2p :
  862. [ 10.695323] get apsta error -1
  863. [ 10.695324] CFGP2P-ERROR) wl_cfgp2p_start_p2p_device :
  864. [ 10.695326] Set P2P in firmware failed, ret=-1
  865. [ 10.717353] CFGP2P-ERROR) wl_cfgp2p_del_p2p_disc_if :
  866. [ 10.717356] P2P interface unregistered
  867. [ 10.918270] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  868. [ 10.949522] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  869. [ 10.949808]
  870.  
  871. Dongle Host Driver, version 1.201.82 (r)
  872. Compiled from
  873. [ 10.949821] wl_android_wifi_on in
  874. [ 10.949830] wifi_platform_set_power = 1
  875. [ 11.161982] vdd-1v8: voltage operation not allowed
  876. [ 11.166818] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1)
  877. [ 11.197480] vdd-1v8: voltage operation not allowed
  878. [ 11.202327] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1)
  879. [ 11.230267] vdd-1v8: voltage operation not allowed
  880. [ 11.235342] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1)
  881. [ 11.244826] vdd-1v8: voltage operation not allowed
  882. [ 11.249693] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1)
  883. [ 11.356242] vdd-1v8: voltage operation not allowed
  884. [ 11.361119] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1)
  885. [ 11.368849] vdd-1v8: voltage operation not allowed
  886. [ 11.373691] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1)
  887. [ 11.382796] vdd-1v8: voltage operation not allowed
  888. [ 11.387622] sdhci-tegra 3440000.sdhci: could not set regulator OCR (-1)
  889. [ 11.394292] sdhci-tegra 3440000.sdhci: Tuning done, restoring the best tap value : 66
  890. [ 11.394889] F1 signature read @0x18000000=0x17214354
  891. [ 11.399150] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x1 pkg:0x2
  892. [ 11.399768] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000
  893. [ 11.471233] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
  894. [ 11.533141] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
  895. [ 11.533646] gpio tegra-gpio-aon wake69 for gpio=59(FF:3)
  896. [ 11.533667] gpio tegra-gpio-aon wake69 for gpio=59(FF:3)
  897. [ 11.533669] Enabling wake69
  898. [ 11.534881] wifi_platform_get_mac_addr
  899. [ 11.536073] Firmware up: op_mode=0x0002, MAC=00:04:4b:c5:e3:2e
  900. [ 11.540199] clm path from default:/lib/firmware/brcm/bcmdhd.clm_blob
  901. [ 11.540218] Skipping the clm download. len:0 memblk: (null)
  902. [ 11.542501] dhd_preinit_ioctls pspretend_threshold for HostAPD failed -23
  903. [ 11.546173] Firmware version = wl0: Oct 31 2018 11:34:03 version 7.35.349.66 (r708495 CY) FWID 01-ade683bb
  904. [ 11.548510] dhd_interworking_enable: failed to set WNM info, ret=-23
  905. [ 11.577891] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  906. [ 11.683500] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  907. [ 11.684436] __wl_cfg80211_scan :
  908. [ 11.684438] Invalid Scan Command at SoftAP mode
  909. [ 11.684440] wl_cfg80211_scan :
  910. [ 11.684443] scan error (-22)
  911. [ 11.718771] wl_cfg80211_del_station :
  912. [ 11.718776] Disconnect STA : ff:ff:ff:ff:ff:ff scb_val.val 3
  913. [ 11.720422] wl_cfg80211_set_channel :
  914. [ 11.720427] netdev_ifidx(4), chan_type(1) target channel(1)
  915. [ 11.742866] _dhd_wlfc_mac_entry_update():1736, entry(32)
  916. [ 11.791267] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  917. [ 11.820541] dhd_ndo_add_ip: ndo ip addr add failed, ret = -23
  918. [ 11.820557] dhd_inet6_work_handler: Adding host ip for NDO failed -23
  919. [ 11.907944] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
  920. [ 13.034908] fuse init (API version 7.26)
  921. [ 15.321877] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  922. [ 15.321893] Bluetooth: BNEP socket layer initialized
  923. [ 23.167302] [06-27 07:53:12.605] wl_notify_connect_status_ap: event WLC_E_ASSOC_IND(8) status 0 reason 0
  924. [ 23.167501] wl_cfg80211_change_station :
  925. [ 23.167503] WLC_SCB_AUTHORIZE sta_flags_mask not set
  926. [ 23.176527] [06-27 07:53:12.614] dhd_dump_eapol_4way_message: ifidx: 0 ETHER_TYPE_802_1X [TX] : M1 of 4way
  927. [ 23.183262] [06-27 07:53:12.620] dhd_dump_eapol_4way_message: ifidx: 0 ETHER_TYPE_802_1X [RX] : M2 of 4way
  928. [ 23.184387] wl_cfg80211_get_key :
  929. [ 23.184390] Invalid algo (0x46)
  930. [ 23.189751] [06-27 07:53:12.627] dhd_dump_eapol_4way_message: ifidx: 0 ETHER_TYPE_802_1X [RX] : M2 of 4way
  931. [ 23.198525] wl_cfg80211_get_key :
  932. [ 23.198529] Invalid algo (0x46)
  933. [ 23.274773] ifidx:0 DHCP - DISCOVER [RX]
  934. [ 23.275917] ifidx:0 DHCP - OFFER [TX]
  935. [ 23.289244] ifidx:0 DHCP - REQUEST [RX]
  936. [ 23.297241] ifidx:0 DHCP - ACK [TX]
  937. [ 27.230667] [06-27 07:53:16.668] wl_notify_connect_status_ap: event WLC_E_ASSOC_IND(8) status 0 reason 0
  938. [ 27.230900] wl_cfg80211_change_station :
  939. [ 27.230902] WLC_SCB_AUTHORIZE sta_flags_mask not set
  940. [ 27.235204] [06-27 07:53:16.672] dhd_dump_eapol_4way_message: ifidx: 0 ETHER_TYPE_802_1X [TX] : M1 of 4way
  941. [ 27.240781] [06-27 07:53:16.678] dhd_dump_eapol_4way_message: ifidx: 0 ETHER_TYPE_802_1X [RX] : M2 of 4way
  942. [ 27.241514] wl_cfg80211_get_key :
  943. [ 27.241519] Invalid algo (0x46)
  944. [ 27.247131] [06-27 07:53:16.684] dhd_dump_eapol_4way_message: ifidx: 0 ETHER_TYPE_802_1X [RX] : M2 of 4way
  945. [ 27.255785] wl_cfg80211_get_key :
  946. [ 27.255791] Invalid algo (0x46)
  947. [ 27.330386] ifidx:0 DHCP - DISCOVER [RX]
  948. [ 27.330790] ifidx:0 DHCP - OFFER [TX]
  949. [ 27.341750] ifidx:0 DHCP - REQUEST [RX]
  950. [ 27.346409] ifidx:0 DHCP - ACK [TX]
  951. [ 28.512421] [06-27 07:53:17.950] wl_notify_connect_status_ap: event WLC_E_DEAUTH_IND(6) status 0 reason 3
  952. [ 28.512455] [06-27 07:53:17.950] wl_notify_connect_status_ap: event WLC_E_DISASSOC_IND(12) status 0 reason 8
  953. [ 28.517021] wl_cfg80211_del_station :
  954. [ 28.517027] Disconnect STA : a8:9c:ed:a0:e8:54 scb_val.val 3
  955. [ 28.665507] [06-27 07:53:18.103] wl_notify_connect_status_ap: event WLC_E_ASSOC_IND(8) status 0 reason 0
  956. [ 28.665669] wl_cfg80211_change_station :
  957. [ 28.665672] WLC_SCB_AUTHORIZE sta_flags_mask not set
  958. [ 28.668195] [06-27 07:53:18.105] dhd_dump_eapol_4way_message: ifidx: 0 ETHER_TYPE_802_1X [TX] : M1 of 4way
  959. [ 28.678780] [06-27 07:53:18.116] dhd_dump_eapol_4way_message: ifidx: 0 ETHER_TYPE_802_1X [RX] : M2 of 4way
  960. [ 28.679548] wl_cfg80211_get_key :
  961. [ 28.679553] Invalid algo (0x46)
  962. [ 28.686249] [06-27 07:53:18.123] dhd_dump_eapol_4way_message: ifidx: 0 ETHER_TYPE_802_1X [RX] : M2 of 4way
  963. [ 28.696396] wl_cfg80211_get_key :
  964. [ 28.696400] Invalid algo (0x46)
  965. [ 28.798641] ifidx:0 DHCP - DISCOVER [RX]
  966. [ 28.799068] ifidx:0 DHCP - OFFER [TX]
  967. [ 28.810394] ifidx:0 DHCP - REQUEST [RX]
  968. [ 28.815936] ifidx:0 DHCP - ACK [TX]
  969. [ 29.905553] [06-27 07:53:19.343] wl_notify_connect_status_ap: event WLC_E_DEAUTH_IND(6) status 0 reason 3
  970. [ 29.905597] [06-27 07:53:19.343] wl_notify_connect_status_ap: event WLC_E_DISASSOC_IND(12) status 0 reason 8
  971. [ 29.905928] [06-27 07:53:19.343] wl_notify_connect_status_ap: event WLC_E_DEAUTH(5) status 0 reason 7
  972. [ 29.910639] wl_cfg80211_del_station :
  973. [ 29.910644] Disconnect STA : a8:9c:ed:a0:e8:54 scb_val.val 3
  974. [ 31.782285] [06-27 07:53:21.219] wl_notify_connect_status_ap: event WLC_E_ASSOC_IND(8) status 0 reason 0
  975. [ 31.782485] wl_cfg80211_change_station :
  976. [ 31.782489] WLC_SCB_AUTHORIZE sta_flags_mask not set
  977. [ 31.785072] [06-27 07:53:21.222] dhd_dump_eapol_4way_message: ifidx: 0 ETHER_TYPE_802_1X [TX] : M1 of 4way
  978. [ 31.792261] [06-27 07:53:21.229] dhd_dump_eapol_4way_message: ifidx: 0 ETHER_TYPE_802_1X [RX] : M2 of 4way
  979. [ 31.793800] wl_cfg80211_get_key :
  980. [ 31.793804] Invalid algo (0x46)
  981. [ 31.803020] [06-27 07:53:21.240] dhd_dump_eapol_4way_message: ifidx: 0 ETHER_TYPE_802_1X [RX] : M2 of 4way
  982. [ 31.809520] wl_cfg80211_get_key :
  983. [ 31.809524] Invalid algo (0x46)
  984. [ 31.885776] ifidx:0 DHCP - DISCOVER [RX]
  985. [ 31.886553] ifidx:0 DHCP - OFFER [TX]
  986. [ 31.897164] ifidx:0 DHCP - REQUEST [RX]
  987. [ 31.903408] ifidx:0 DHCP - ACK [TX]
  988. [ 40.698188] [06-27 07:53:30.135] wl_notify_connect_status_ap: event WLC_E_ASSOC_IND(8) status 0 reason 0
  989. [ 40.698543] wl_cfg80211_change_station :
  990. [ 40.698548] WLC_SCB_AUTHORIZE sta_flags_mask not set
  991. [ 40.699706] [06-27 07:53:30.137] wl_notify_connect_status_ap: event WLC_E_DEAUTH_IND(6) status 0 reason 3
  992. [ 40.699784] [06-27 07:53:30.137] wl_notify_connect_status_ap: event WLC_E_DISASSOC_IND(12) status 0 reason 8
  993. [ 40.703480] [06-27 07:53:30.141] dhd_dump_eapol_4way_message: ifidx: 0 ETHER_TYPE_802_1X [TX] : M1 of 4way
  994. [ 40.708426] _dhd_wlfc_deque_afq: queue is empty
  995. [ 40.708512] [06-27 07:53:30.146] dhd_dump_eapol_4way_message: ifidx: 0 ETHER_TYPE_802_1X [RX] : M2 of 4way
  996. [ 40.710295] wl_cfg80211_del_station :
  997. [ 40.710301] Disconnect STA : a8:9c:ed:a0:e8:54 scb_val.val 3
  998. [ 40.714200] wl_cfg80211_get_key :
  999. [ 40.714207] Invalid algo (0x46)
  1000. [ 40.720799] [06-27 07:53:30.158] dhd_dump_eapol_4way_message: ifidx: 0 ETHER_TYPE_802_1X [RX] : M2 of 4way
  1001. [ 40.726910] wl_cfg80211_get_key :
  1002. [ 40.726914] Invalid algo (0x46)
  1003. [ 40.818550] ifidx:0 DHCP - DISCOVER [RX]
  1004. [ 43.873915] ifidx:0 DHCP - DISCOVER [RX]
  1005. [ 44.136159] ifidx:0 DHCP - OFFER [TX]
  1006. [ 44.136544] ifidx:0 DHCP - OFFER [TX]
  1007. [ 72.024689] [06-27 07:54:01.462] wl_notify_connect_status_ap: event WLC_E_DEAUTH_IND(6) status 0 reason 3
  1008. [ 72.024717] [06-27 07:54:01.462] wl_notify_connect_status_ap: event WLC_E_DISASSOC_IND(12) status 0 reason 8
  1009. [ 72.029594] wl_cfg80211_del_station :
  1010. [ 72.029600] Disconnect STA : 88:b1:11:38:49:65 scb_val.val 3
  1011. [ 129.762895] nvgpu: 17000000.gp10b railgate_enable_store:343 [INFO] railgate is disabled.
  1012. [ 249.994409] nvgpu: 17000000.gp10b railgate_enable_store:343 [INFO] railgate is disabled.
  1013. [ 329.256294] edid invalid
  1014. [ 329.258875] edid invalid
  1015. [ 329.279186] edid invalid
  1016. [ 329.419567] tegradc 15210000.nvdisplay: blank - powerdown
  1017. [ 329.419782] tegradc 15210000.nvdisplay: unblank
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement