xlazom00

Untitled

Dec 24th, 2022
333
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 29.97 KB | None | 0 0
  1. DDR Version V1.08 20220617
  2. LPDDR4X, 2112MHz
  3. channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
  4. channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
  5. channel[2] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
  6. channel[3] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB
  7. Manufacturer ID:0xff
  8. CH0 RX Vref:29.7%, TX Vref:20.8%,0.0%
  9. CH1 RX Vref:30.7%, TX Vref:21.8%,0.0%
  10. CH2 RX Vref:28.7%, TX Vref:21.8%,0.0%
  11. CH3 RX Vref:29.7%, TX Vref:20.8%,0.0%
  12. change to F1: 528MHz
  13. change to F2: 1068MHz
  14. change to F3: 1560MHz
  15. change to F0: 2112MHz
  16. out
  17. U-Boot SPL board init
  18. U-Boot SPL 2017.09-armbian (Dec 24 2022 - 22:35:04)
  19. Trying to boot from MMC2
  20. MMC: no card present
  21. mmc_init: -123, time 0
  22. spl: mmc init failed with error: -123
  23. Trying to boot from MMC1
  24. spl: partition error
  25. Trying fit image at 0x4000 sector
  26. ## Verified-boot: 0
  27. ## Checking atf-1 0x00040000 ... sha256(806278dba1...) + OK
  28. ## Checking uboot 0x00200000 ... sha256(feedaf38a1...) + OK
  29. ## Checking fdt 0x0030a698 ... sha256(d32827d3ac...) + OK
  30. ## Checking atf-2 0x000f0000 ... sha256(c00c7fd75b...) + OK
  31. ## Checking atf-3 0xff100000 ... sha256(71c3a5841b...) + OK
  32. ## Checking atf-4 0xff001000 ... sha256(2301cf73be...) + OK
  33. Jumping to U-Boot(0x00200000) via ARM Trusted Firmware(0x00040000)
  34. Total: 513.887 ms
  35.  
  36. INFO: Preloader serial: 2
  37. NOTICE: BL31: v2.3():v2.3-405-gb52c2eadd:derrick.huang
  38. NOTICE: BL31: Built : 11:23:47, Aug 15 2022
  39. INFO: spec: 0x1
  40. INFO: ext 32k is not valid
  41. INFO: GICv3 without legacy support detected.
  42. INFO: ARM GICv3 driver initialized in EL3
  43. INFO: system boots from cpu-hwid-0
  44. INFO: idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001
  45. INFO: dfs DDR fsp_params[0].freq_mhz= 2112MHz
  46. INFO: dfs DDR fsp_params[1].freq_mhz= 528MHz
  47. INFO: dfs DDR fsp_params[2].freq_mhz= 1068MHz
  48. INFO: dfs DDR fsp_params[3].freq_mhz= 1560MHz
  49. INFO: BL31: Initialising Exception Handling Framework
  50. INFO: BL31: Initializing runtime services
  51. WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
  52. ERROR: Error initializing runtime service opteed_fast
  53. INFO: BL31: Preparing for EL3 exit to normal world
  54. INFO: Entry point address = 0x200000
  55. INFO: SPSR = 0x3c9
  56.  
  57.  
  58. U-Boot 2017.09-armbian (Dec 24 2022 - 22:35:04 +0100)
  59.  
  60. Model: Radxa ROCK 5B
  61. PreSerial: 2, raw, 0xfeb50000
  62. DRAM: 3.7 GiB
  63. Sysmem: init
  64. Relocation Offset: edb6c000
  65. Relocation fdt: eb9fa358 - eb9fecc0
  66. CR: M/C/I
  67. Using default environment
  68.  
  69. mmc@fe2c0000: 1, mmc@fe2e0000: 0
  70. Bootdev(atags): mmc 0
  71. MMC0: HS200, 200Mhz
  72. PartType: EFI
  73. DM: v2
  74. No misc partition
  75. boot mode: None
  76. FIT: No boot partition
  77. No resource partition
  78. No resource partition
  79. No resource partition
  80. Failed to load DTB, ret=-19
  81. No find valid DTB, ret=-22
  82. Failed to get kernel dtb, ret=-22
  83. Model: Radxa ROCK 5B
  84. CLK: (sync kernel. arm: enter 1008000 KHz, init 1008000 KHz, kernel 0N/A)
  85. b0pll 24000 KHz
  86. b1pll 24000 KHz
  87. lpll 24000 KHz
  88. v0pll 24000 KHz
  89. aupll 24000 KHz
  90. cpll 1500000 KHz
  91. gpll 1188000 KHz
  92. npll 24000 KHz
  93. ppll 1100000 KHz
  94. aclk_center_root 702000 KHz
  95. pclk_center_root 100000 KHz
  96. hclk_center_root 396000 KHz
  97. aclk_center_low_root 500000 KHz
  98. aclk_top_root 750000 KHz
  99. pclk_top_root 100000 KHz
  100. aclk_low_top_root 396000 KHz
  101. No misc partition
  102. Net: No ethernet found.
  103. Hit key to stop autoboot('CTRL+C'): 0
  104. PCIe-0 Link Fail
  105.  
  106. Device 0: unknown device
  107. MMC: no card present
  108. mmc_init: -123, time 1
  109. switch to partitions #0, OK
  110. mmc0(part 0) is current device
  111. Scanning mmc 0:1...
  112. Found U-Boot script /boot.scr
  113. 3252 bytes read in 3 ms (1 MiB/s)
  114. ## Executing script at 00500000
  115. Boot script loaded from mmc 0
  116. 160 bytes read in 3 ms (51.8 KiB/s)
  117. 29231969 bytes read in 178 ms (156.6 MiB/s)
  118. 32995840 bytes read in 199 ms (158.1 MiB/s)
  119. 38446 bytes read in 24 ms (1.5 MiB/s)
  120. ** File not found /dtb/rockchip/overlay/rockchip-rk3588-fixup.scr **
  121. Unknown command 'kaslrseed' - try 'help'
  122. Fdt Ramdisk skip relocation
  123. No misc partition
  124. ## Loading init Ramdisk from Legacy Image at 0a200000 ...
  125. Image Name: uInitrd
  126. Image Type: AArch64 Linux RAMDisk Image (gzip compressed)
  127. Data Size: 29231905 Bytes = 27.9 MiB
  128. Load Address: 00000000
  129. Entry Point: 00000000
  130. Verifying Checksum ... OK
  131. ## Flattened Device Tree blob at 0x0a100000
  132. Booting using the fdt blob at 0x0a100000
  133. reserving fdt memory region: addr=a100000 size=6f000
  134. Using Device Tree in place at 000000000a100000, end 000000000a171fff
  135. can't found rockchip,drm-logo, use rockchip,fb-logo
  136. WARNING: could not set reg FDT_ERR_BADOFFSET.
  137. failed to reserve fb-loader-logo memory
  138. Adding bank: 0x00200000 - 0xf0000000 (size: 0xefe00000)
  139. Total: 1594.329 ms
  140.  
  141. Starting kernel ...
  142.  
  143. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
  144. [ 0.000000] Linux version 6.1.0-rockchip-rk3588 (root@misko-virtual-machine) (aarch64-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) 8.3.0, GNU ld (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) 2.32.0.20190321) #trunk SMP PREEMPT Sat Dec 24 22:37:50 CET 2022
  145. [ 0.000000] Machine model: Radxa Rock 5B Board
  146. [ 0.000000] efi: UEFI not found.
  147. [ 0.000000] NUMA: No NUMA configuration found
  148. [ 0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x00000000efffffff]
  149. [ 0.000000] NUMA: NODE_DATA [mem 0xef83b480-0xef83dfff]
  150. [ 0.000000] Zone ranges:
  151. [ 0.000000] DMA [mem 0x0000000000200000-0x00000000efffffff]
  152. [ 0.000000] DMA32 empty
  153. [ 0.000000] Normal empty
  154. [ 0.000000] Movable zone start for each node
  155. [ 0.000000] Early memory node ranges
  156. [ 0.000000] node 0: [mem 0x0000000000200000-0x00000000efffffff]
  157. [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000efffffff]
  158. [ 0.000000] On node 0, zone DMA: 512 pages in unavailable ranges
  159. [ 0.000000] cma: Reserved 384 MiB at 0x00000000d3c00000
  160. [ 0.000000] psci: probing for conduit method from DT.
  161. [ 0.000000] psci: PSCIv1.1 detected in firmware.
  162. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  163. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  164. [ 0.000000] psci: SMC Calling Convention v1.2
  165. [ 0.000000] ------------[ cut here ]------------
  166. [ 0.000000] WARNING: CPU: 0 PID: 0 at include/linux/cpumask.h:47 set_nr_cpu_ids.part.8+0x4/0x10
  167. [ 0.000000] Modules linked in:
  168. [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.1.0-rockchip-rk3588 #trunk
  169. [ 0.000000] Hardware name: Radxa Rock 5B Board (DT)
  170. [ 0.000000] pstate: 800000c9 (Nzcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
  171. [ 0.000000] pc : set_nr_cpu_ids.part.8+0x4/0x10
  172. [ 0.000000] lr : setup_nr_cpu_ids+0x28/0x34
  173. [ 0.000000] sp : ffff800009ca3e00
  174. [ 0.000000] x29: ffff800009ca3e00 x28: 0000000000000121 x27: 0000000000000000
  175. [ 0.000000] x26: ffff8000098d5108 x25: ffff800009738430 x24: ffff8000097385a8
  176. [ 0.000000] x23: ffff800009738000 x22: ffff800009ca9980 x21: ffff8000098d6100
  177. [ 0.000000] x20: 0000000000000000 x19: ffff800009f7e000 x18: 0000000000000001
  178. [ 0.000000] x17: 000000000000002c x16: 00000000ef83f0b8 x15: 7267632074657375
  179. [ 0.000000] x14: 70633d656c62616e x13: 6f6d656d3d656c62 x12: 616e655f70756f72
  180. [ 0.000000] x11: 00313d746e756f63 x10: 6361706177732079 x9 : 726f6d656d3d656c
  181. [ 0.000000] x8 : 0101010101010101 x7 : 7fffffffffffffff x6 : 5efef9fedeeef8fe
  182. [ 0.000000] x5 : ffff800009ca9a68 x4 : 00000000000000ff x3 : 0000000000000038
  183. [ 0.000000] x2 : 0000000000000000 x1 : 0000000000000100 x0 : 0000000000000007
  184. [ 0.000000] Call trace:
  185. [ 0.000000] set_nr_cpu_ids.part.8+0x4/0x10
  186. [ 0.000000] start_kernel+0x4a4/0x9fc
  187. [ 0.000000] __primary_switched+0xbc/0xc4
  188. [ 0.000000] ---[ end trace 0000000000000000 ]---
  189. [ 0.000000] percpu: Embedded 30 pages/cpu s84328 r8192 d30360 u122880
  190. [ 0.000000] pcpu-alloc: s84328 r8192 d30360 u122880 alloc=30*4096
  191. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
  192. [ 0.000000] Detected VIPT I-cache on CPU0
  193. [ 0.000000] CPU features: detected: GIC system register CPU interface
  194. [ 0.000000] CPU features: detected: Virtualization Host Extensions
  195. [ 0.000000] CPU features: detected: Qualcomm erratum 1009, or ARM erratum 1286807, 2441009
  196. [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
  197. [ 0.000000] alternatives: applying boot alternatives
  198. [ 0.000000] Fallback order for Node 0: 0
  199. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 967176
  200. [ 0.000000] Policy zone: DMA
  201. [ 0.000000] Kernel command line: root=UUID=8d7e70dc-96a4-472b-bf5c-079166aa6479 rootwait rootfstype=ext4 splash=verbose console=ttyS2,1500000 console=tty1 consoleblank=0 loglevel=9 ubootpart=65b633bf-021f-b241-8f6a-d584d2513abd usb-storage.quirks= cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1
  202. [ 0.000000] The swapaccount= commandline option is deprecated. Please report your usecase to [email protected] if you depend on this functionality.
  203. [ 0.000000] Unknown kernel command line parameters "splash=verbose ubootpart=65b633bf-021f-b241-8f6a-d584d2513abd cgroup_enable=memory cgroup_memory=1", will be passed to user space.
  204. [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
  205. [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
  206. [ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
  207. [ 0.000000] Memory: 3398780K/3930112K available (17408K kernel code, 2910K rwdata, 6996K rodata, 4736K init, 741K bss, 138116K reserved, 393216K cma-reserved)
  208. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=256, Nodes=1
  209. [ 0.000000] trace event string verifier disabled
  210. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  211. [ 0.000000] rcu: RCU event tracing is enabled.
  212. [ 0.000000] Trampoline variant of Tasks RCU enabled.
  213. [ 0.000000] Tracing variant of Tasks RCU enabled.
  214. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 26 jiffies.
  215. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  216. [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
  217. [ 0.000000] GICv3: 480 SPIs implemented
  218. [ 0.000000] GICv3: 0 Extended SPIs implemented
  219. [ 0.000000] GICv3: MBI range [424:479]
  220. [ 0.000000] GICv3: Using MBI frame 0x00000000fe610000
  221. [ 0.000000] Root IRQ handler: gic_handle_irq
  222. [ 0.000000] GICv3: GICv3 features: 16 PPIs
  223. [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fe680000
  224. [ 0.000000] ITS: No ITS available, not enabling LPIs
  225. [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@100[1] /cpus/cpu@200[2] /cpus/cpu@300[3] }
  226. [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@400[4] /cpus/cpu@500[5] /cpus/cpu@600[6] /cpus/cpu@700[7] }
  227. [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes to big.
  228. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  229. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  230. [ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  231. [ 0.000510] Console: colour dummy device 80x25
  232. [ 0.000520] printk: console [tty1] enabled
  233. [ 0.001295] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  234. [ 0.001320] pid_max: default: 32768 minimum: 301
  235. [ 0.001492] LSM: initializing lsm=lockdown,capability,yama,integrity,apparmor
  236. [ 0.001550] Yama: becoming mindful.
  237. [ 0.001665] AppArmor: AppArmor initialized
  238. [ 0.001793] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
  239. [ 0.001820] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
  240. [ 0.004042] cblist_init_generic: Setting adjustable number of callback queues.
  241. [ 0.004068] cblist_init_generic: Setting shift to 8 and lim to 1.
  242. [ 0.004170] cblist_init_generic: Setting shift to 8 and lim to 1.
  243. [ 0.004376] rcu: Hierarchical SRCU implementation.
  244. [ 0.004391] rcu: Max phase no-delay instances is 1000.
  245. [ 0.007007] EFI services will not be available.
  246. [ 0.007466] smp: Bringing up secondary CPUs ...
  247. [ 0.008130] Detected VIPT I-cache on CPU1
  248. [ 0.008216] GICv3: CPU1: found redistributor 100 region 0:0x00000000fe6a0000
  249. [ 0.008247] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
  250. [ 0.008932] Detected VIPT I-cache on CPU2
  251. [ 0.009019] GICv3: CPU2: found redistributor 200 region 0:0x00000000fe6c0000
  252. [ 0.009047] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
  253. [ 0.009661] Detected VIPT I-cache on CPU3
  254. [ 0.009741] GICv3: CPU3: found redistributor 300 region 0:0x00000000fe6e0000
  255. [ 0.009765] CBooted secondary processor 0x0000000400 [0x414fd0b0]
  256. [ 0.011048] Detected PIPT I-cache on CPU5
  257. [ 0.011096] GICv3: CPU5: found redistributor 500 region 0:0x00000000fe720000
  258. [ 0.011109] CPU5: Booted secondary processor 0x0000000500 [0x414fd0b0]
  259. [ 0.011682] Detected PIPT I-cache on CPU6
  260. [ 0.011728] GICv3: CPU6: found redistributor 600 region 0:0x00000000fe740000
  261. [ 0.011741] CPU6: Booted secondary processor 0x0000000600 [0x414fd0b0]
  262. [ 0.012411] Detected PIPT I-cache on CPU7
  263. [ 0.012458] GICv3: CPU7: found redistributor 700 region 0:0x00000000fe760000
  264. [ 0.012470] CPU7: Booted secondary processor 0x0000000700 [0x414fd0b0]
  265. [ 0.012531] smp: Brought up 1 node, 8 CPUs
  266. [ 0.012711] SMP: Total of 8 processors activated.
  267. [ 0.012723] CPU features: detected: 32-bit EL0 Support
  268. [ 0.012734] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
  269. [ 0.012749] CPU features: detected: Common not Private translations
  270. [ 0.012760] CPU features: detected: CRC32 instructions
  271. [ 0.012773] CPU features: detected: RCpc load-acquire (LDAPR)
  272. [ 0.012784] CPU features: detected: LSE atomic instructions
  273. [ 0.012795] CPU features: detected: Privileged Access Never
  274. [ 0.012805] CPU features: detected: RAS Extension Support
  275. [ 0.012817] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
  276. [ 0.012898] CPU: All CPU(s) started at EL2
  277. [ 0.012910] alternatives: applying system-wide alternatives
  278. [ 0.017499] devtmpfs: initialized
  279. [ 0.020408] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  280. [ 0.020430] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
  281. [ 0.022727] pinctrl core: initialized pinctrl subsystem
  282. [ 0.022936] DMI not present or invalid.
  283. [ 0.023245] NET: Registered PF_NETLINK/PF_ROUTE protocol family
  284. [ 0.024179] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
  285. [ 0.024491] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
  286. [ 0.024662] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
  287. [ 0.024685] audit: initializing netlink subsys (disabled)
  288. [ 0.024807] audit: type=2000 audit(0.024:1): state=initialized audit_enabled=0 res=1
  289. [ 0.025230] thermal_sys: Registered thermal governor 'fair_share'
  290. [ 0.025233] thermal_sys: Registered thermal governor 'bang_bang'
  291. [ 0.025239] thermal_sys: Registered thermal governor 'step_wise'
  292. [ 0.025243] thermal_sys: Registered thermal governor 'user_space'
  293. [ 0.025247] thermal_sys: Registered thermal governor 'power_allocator'
  294. [ 0.025277] cpuidle: using governor ladder
  295. [ 0.025302] cpuidle: using governor menu
  296. [ 0.025427] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  297. [ 0.025537] ASID allocator initialised with 65536 entries
  298. [ 0.025822] Serial: AMBA PL011 UART driver
  299. [ 0.033015] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation.
  300. [ 0.033198] rockchip-gpio fd8a0000.gpio: probed /pinctrl/gpio@fd8a0000
  301. [ 0.033314] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation.
  302. [ 0.033413] rockchip-gpio fec20000.gpio: probed /pinctrl/gpio@fec20000
  303. [ 0.033521] gpio gpiochip2: Static allocation of GPIO base is deprecated, use dynamic allocation.
  304. [ 0.033613] rockchip-gpio fec30000.gpio: probed /pinctrl/gpio@fec30000
  305. [ 0.033712] gpio gpiochip3: Static allocation of GPIO base is deprecated, use dynamic allocation.
  306. [ 0.033810] rockchip-gpio fec40000.gpio: probed /pinctrl/gpio@fec40000
  307. [ 0.033914] gpio gpiochip4: Static allocation of GPIO base is deprecated, use dynamic allocation.
  308. [ 0.034025] rockchip-gpio fec50000.gpio: probed /pinctrl/gpio@fec50000
  309. [ 0.034540] KASLR disabled due to lack of seed
  310. [ 0.034954] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
  311. [ 0.0349ode
  312. [ 0.645510] SCSI subsystem initialized
  313. [ 0.645616] libata version 3.00 loaded.
  314. [ 0.645680] usbcore: registered new interface driver usbfs
  315. [ 0.645692] usbcore: registered new interface driver hub
  316. [ 0.645706] usbcore: registered new device driver usb
  317. [ 0.645830] pps_core: LinuxPPS API ver. 1 registered
  318. [ 0.645834] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  319. [ 0.645842] PTP clock support registered
  320. [ 0.645999] EDAC MC: Ver: 3.0.0
  321. [ 0.646246] arm-scmi firmware:scmi: Enabled polling mode TX channel - prot_id:16
  322. [ 0.646286] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.
  323. [ 0.646314] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0
  324. [ 0.646568] FPGA manager framework
  325. [ 0.646883] NetLabel: Initializing
  326. [ 0.646887] NetLabel: domain hash size = 128
  327. [ 0.646891] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
  328. [ 0.646918] NetLabel: unlabeled traffic allowed by default
  329. [ 0.646985] vgaarb: loaded
  330. [ 0.647228] clocksource: Switched to clocksource arch_sys_counter
  331. [ 0.647399] VFS: Disk quotas dquot_6.6.0
  332. [ 0.647426] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  333. [ 0.647685] AppArmor: AppArmor Filesystem Enabled
  334. [ 0.647707] pnp: PnP ACPI: disabled
  335. [ 0.652203] NET: Registered PF_INET protocol family
  336. [ 0.652312] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
  337. [ 0.653817] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
  338. [ 0.653865] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
  339. [ 0.653915] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
  340. [ 0.654137] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
  341. [ 0.654731] TCP: Hash tables configured (established 32768 bind 32768)
  342. [ 0.654790] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
  343. [ 0.654866] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
  344. [ 0.655000] NET: Registered PF_UNIX/PF_LOCAL protocol family
  345. [ 0.655020] NET: Registered PF_XDP protocol family
  346. [ 0.655027] PCI: CLS 0 bytes, default 64
  347. [ 0.655257] Trying to unpack rootfs image as initramfs...
  348. [ 0.659949] hw perfevents: enabled with armv8_cortex_a55 PMU driver, 7 counters available
  349. [ 0.660168] hw perfevents: enabled with armv8_cortex_a76 PMU driver, 7 counters available
  350. [ 0.660379] kvm [1]: IPA Size Limit: 40 bits
  351. [ 0.660402] kvm [1]: GICv3: no GICV resource entry
  352. [ 0.660407] kvm [1]: disabling GICv2 emulation
  353. [ 0.660420] kvm [1]: GIC system register CPU interface enabled
  354. [ 0.660548] kvm [1]: vgic interrupt IRQ18
  355. [ 0.660710] kvm [1]: VHE mode initialized successfully
  356. [ 0.661527] Initialise system trusted keyrings
  357. [ 0.661560] Key type blacklist registered
  358. [ 0.661688] workingset: timestamp_bits=42 max_order=20 bucket_order=0
  359. [ 0.661722] zbud: loaded
  360. [ 0.662032] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  361. [ 0.662237] fuse: init (API version 7.38)
  362. [ 0.663053] integrity: Platform Keyring initialized
  363. [ 0.681761] xor: measuring software checksum speed
  364. [ 0.682890] 8regs : 8743 MB/sec
  365. [ 0.684043] 32regs : 8602 MB/sec
  366. [ 0.684989] arm64_neon : 10460 MB/sec
  367. [ 0.684992] xor: using function: arm64_neon (10460 MB/sec)
  368. [ 0.684999] Key type asymmetric registered
  369. [ 0.685003] Asymmetric key parser 'x509' registered
  370. [ 0.685043] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
  371. [ 0.685163] io scheduler mq-deadline registered
  372. [ 0.685170] io scheduler kyber registered
  373. [ 0.685197] io scheduler bfq registered
  374. [ 0.687364] EINJ: ACPI disabled.
  375. [ 0.691974] dma-pl330 fea10000.dma-controller: Loaded driver for PL330 DMAC-241330
  376. [ 0.691982] dma-pl330 fea10000.dma-controller:
  377. [ 0.846015] thunder_xcv, ver 1.0
  378. [ 0.846307] thunder_bgx, ver 1.0
  379. [ 0.846596] nicpf, ver 1.0
  380. [ 0.846993] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
  381. [ 0.847632] hns3: Copyright (c) 2017 Huawei Corporation.
  382. [ 0.848105] hclge is initializing
  383. [ 0.848841] VFIO - User Level meta-driver version: 0.3
  384. [ 0.849942] usbcore: registered new interface driver usb-storage
  385. [ 0.850947] mousedev: PS/2 mouse device common for all mice
  386. [ 0.851648] i2c_dev: i2c /dev entries driver
  387. [ 0.852690] ghes_edac: GHES probing device list is empty
  388. [ 0.853152] sdhci: Secure Digital Host Controller Interface driver
  389. [ 0.854154] sdhci: Copyright(c) Pierre Ossman
  390. [ 0.854643] Synopsys Designware Multimedia Card Interface Driver
  391. [ 0.855386] sdhci-pltfm: SDHCI platform and OF driver helper
  392. [ 0.856410] ledtrig-cpu: registered to indicate activity on CPUs
  393. [ 0.857009] No iBFT detected.
  394. [ 0.857345] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active.
  395. [ 0.857941] SMCCC: SOC_ID: ARCH_FEATURES(ARCH_SOC_ID) returned error: fffffffffffffffd
  396. [ 0.858714] hid: raw HID events driver (C) Jiri Kosina
  397. [ 0.859181] usbcore: registered new interface driver usbhid
  398. [ 0.859675] usbhid: USB HID core driver
  399. [ 0.860761] optee: probing for conduit method.
  400. [ 0.861152] optee: api uid mismatch
  401. [ 0.861458] optee: probe of firmware:optee failed with error -22
  402. [ 0.862349] NET: Registered PF_INET6 protocol family
  403. [ 0.887809] mmc1: SDHCI controller on fe2e0000.mmc [fe2e0000.mmc] using ADMA
  404. [ 0.946080] mmc1: new HS400 Enhanced strobe MMC card at address 0001
  405. [ 0.947437] mmcblk1: mmc1:0001 AJNB4R 14.6 GiB
  406. [ 0.951835] GPT:Primary header thinks Alt. header is not at the end of the disk.
  407. [ 0.952497] GPT:2957311 != 30535679
  408. [ 0.952812] GPT:Alternate GPT header not at the end of the disk.
  409. [ 0.953345] GPT:2957311 != 30535679
  410. [ 0.953658] GPT: Use GNU Parted to correct GPT errors.
  411. [ 0.954132] mmcblk1: p1 p2
  412. [ 0.955176] mmcblk1boot0: mmc1:0001 AJNB4R 4.00 MiB
  413. [ 0.957321] mmcblk1boot1: mmc1:0001 AJNB4R 4.00 MiB
  414. [ 0.959266] mmcblk1rpmb: mmc1:0001 AJNB4R 4.00 MiB, chardev (239:0)
  415. [ 1.273942] Freeing initrd memory: 28540K
  416. [ 1.299044] Segment Routing with IPv6
  417. [ 1.299411] In-situ OAM (IOAM) with IPv6
  418. [ 1.299807] NET: Registered PF_PACKET protocol family
  419. [ 1.300482] 8021q: 802.1Q VLAN Support v1.8
  420. [ 1.300895] Key type dns_resolver registered
  421. [ 1.305178] registered taskstats version 1
  422. [ 1.305662] Loading compiled-in X.509 certificates
  423. [ 1.307427] Loaded X.509 cert 'Build time autogenerated kernel key: 33d3dd9448472e7c4950db8b693d1170887b840d'
  424. [ 1.311601] zswap: loaded using pool zstd/z3fold
  425. [ 1.314913] Key type .fscrypt registered
  426. [ 1.315279] Key type fscrypt-provisioning registered
  427. [ 1.316533] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=yes
  428. [ 1.317204] Key type encrypted registered
  429. [ 1.317558] AppArmor: AppArmor sha1 policy hashing enabled
  430. [ 1.318048] ima: No TPM chip found, activating TPM-bypass!
  431. [ 1.318545] ima: Allocated hash algorithm: sha1
  432. [ 1.318950] ima: No architecture policies found
  433. [ 1.319392] evm: Initialising EVM extended attributes:
  434. [ 1.319841] evm: security.selinux
  435. [ 1.320130] evm: security.SMACK64
  436. [ 1.320420] evm: security.SMACK64EXEC
  437. [ 1.320740] evm: security.SMACK64TRANSMUTE
  438. [ 1.321098] evm: security.SMACK64MMAP
  439. [ 1.321419] evm: security.apparmor
  440. [ 1.321716] evm: security.ima
  441. [ 1.321976] evm: security.capability
  442. [ 1.322289] evm: HMAC attrs: 0x1
  443. [ 1.341090] printk: console [netcon0] enabled
  444. [ 1.341484] netconsole: network logging started
  445. [ 1.342017] psci_checker: PSCI checker started using 8 CPUs
  446. [ 1.342505] psci_checker: Starting hotplug tests
  447. [ 1.342911] psci_checker: Trying to turn off and on again all CPUs
  448. [ 1.344612] psci: CPU0 killed (polled 0 ms)
  449. [ 1.348829] psci: CPU1 killed (polled 0 ms)
  450. [ 1.352762] psci: CPU2 killed (polled 0 ms)
  451. [ 1.357198] psci: CPU3 killed (polled 0 ms)
  452. [ 1.358632] psci: CPU4 killed (polled 0 ms)
  453. [ 1.360079] psci: CPU5 killed (polled 0 ms)
  454. [ 1.361336] psci: CPU6 killed (polled 0 ms)
  455. [ 1.362674] Detected VIPT I-cache on CPU0
  456. [ 1.363089] GICv3: CPU0: found redistributor 0 region 0:0x00000000fe680000
  457. [ 1.363732] CPU0: Booted secondary processor 0x0000000000 [0x412fd050]
  458. [ 1.365498] Detected VIPT I-cache on CPU1
  459. [ 1.365895] GICv3: CPU1: found redistributor 100 region 0:0x00000000fe6a0000
  460. [ 1.366540] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
  461. [ 1.368728] Detected VIPT I-cache on CPU2
  462. [ 1.369122] GICv3: CPU2: found redistributor 200 region 0:0x00000000fe6c0000
  463. [ 1.369764] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
  464. [ 1.372348] Detected VIPT I-cache on CPU3
  465. [ 1.372760] GICv3: CPU3: found redistributor 300 region 0:0x00000000fe6e0000
  466. [ 1.373402] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
  467. [ 1.376273] CPU features: detected: Hardware dirty bit management
  468. [ 1.376814] Detected PIPT I-cache on CPU4
  469. [ 1.377192] GICv3: CPU4: found redistributor 400 region 0:0x00000000fe700000
  470. [ 1.377817] CPU4: Booted secondary processor 0x0000000400 [0x414fd0b0]
  471. [ 1.379471] Detected PIPT I-cache on CPU5
  472. [ 1.379854] GICv3: CPU5: found redistributor 500 region 0:0x00000000fe720000
  473. [ 1.380479] CPU5: Booted secondary processor 0x0000000500 [0x414fd0b0]
  474. [ 1.382426] Detected PIPT I-cache on CPU6
  475. [ 1.382818] GICv3: CPU6: found redistributor 600 region 0:0x00000000fe740000
  476. [ 1.383450] CPU6: Booted secondary processor 0x0000000600 [0x414fd0b0]
  477. [ 1.385150] psci_checker: Trying to turn off and on again group 0 (CPUs 0-7)
  478. [ 1.386279] psci: CPU0 killed (polled 0 ms)
  479. [ 1.390142] psci: CPU1 killed (polled 0 ms)
  480. [ 1.393460] psci: CPU2 killed (polled 0 ms)
  481. [ 1.396530] psci: CPU3 killed (polled 0 ms)
  482. [ 1.397783] psci: CPU4 killed (polled 0 ms)
  483. [ 1.398898] psci: CPU5 killed (polled 0 ms)
  484. [ 1.400038] psci: CPU6 killed (polled 0 ms)
  485. [ 1.401169] Detected VIPT I-cache on CPU0
  486. [ 1.401583] GICv3: CPU0: found redistributor 0 region 0:0x00000000fe680000
  487. [ 1.402227] CPU0: Booted secondary processor 0x0000000000 [0x412fd050]
  488. [ 1.404063] Detected VIPT I-cache on CPU1
  489. [ 1.404463] GICv3: CPU1: found redistributor 100 region 0:0x00000000fe6a0000
  490. [ 1.405108] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
  491. [ 1.407235] Detected VIPT I-cache on CPU2
  492. [ 1.407630] GICv3: CPU2: found redistributor 200 region 0:0x00000000fe6c0000
  493. [ 1.408275] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
  494. [ 1.410887] Detected VIPT I-cache on CPU3
  495. [ 1.411304] GICv3: CPU3: found redistributor 300 region 0:0x00000000fe6e0000
  496. [ 1.411946] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
  497. [ 1.414683] Detected PIPT I-cache on CPU4
  498. [ 1.415063] GICv3: CPU4: found redistributor 400 region 0:0x00000000fe700000
  499. [ 1.415688] CPU4: Booted secondary processor 0x0000000400 [0x414fd0b0]
  500. [ 1.417385] Detected PIPT I-cache on CPU5
  501. [ 1.417768] GICv3: CPU5: found redistributor 500 region 0:0x00000000fe720000
  502. [ 1.418393] CPU5: Booted secondary processor 0x0000000500 [0x414fd0b0]
  503. [ 1.420174] Detected PIPT I-cache on CPU6
  504. [ 1.420558] GICv3: CPU6: found redistributor 600 region 0:0x00000000fe740000
  505. [ 1.421183] CPU6: Booted secondary processor 0x0000000600 [0x414fd0b0]
  506. [ 1.422685] psci_checker: Hotplug tests passed OK
  507. [ 1.423099] psci_checker: Starting suspend tests (10 cycles per state)
  508. [ 1.424644] psci_checker: CPU 7 entering suspend cycles, states 1 through 1
  509. [ 1.424645] psci_checker: CPU 5 entering suspend cycles, states 1 through 1
  510. [ 1.424646] psci_checker: CPU 4 entering suspend cycles, states 1 through 1
  511. [ 1.424646] psci_checker: CPU 6 entering suspend cycles, states 1 through 1
  512. [ 1.424647] psci_checker: CPU 0 entering suspend cycles, states 1 through 1
  513. [ 1.424649] psci_checker: CPU 1 entering suspend cycles, states 1 through 1
  514. [ 1.424650] psci_checker: CPU 2 entering suspend cycles, states 1 through 1
  515. [ 1.424650] psci_checker: CPU 3 entering suspend cycles, states 1 through 1
  516. [ 1.467248] psci_checker: CPU 0 suspend test results: success 9, shallow states 1, errors 0
  517. [ 1.468033] psci_checker: CPU 1 suspend test results: success 10, shallow states 0, errors 0
  518. [ 1.468827] psci_checker: CPU 2 suspend test results: success 10, shallow states 0, errors 0
  519. [ 1.469620] psci_checker: CPU 3 suspend test results: success 10, shallow states 0, errors 0
  520. [ 1.470408] psci_checker: CPU 4 suspend test results: success 10, shallow states 0, errors 0
  521. [ 1.471166] psci_checker: CPU 5 suspend test results: success 10, shallow states 0, errors 0
  522. [ 1.471930] psci_checker: CPU 6 suspend test results: success 10, shallow states 0, errors 0
  523. [ 1.472685] psci_checker: CPU 7 suspend test results: success 0, shallow states 10, errors 0
  524. [ 1.473440] psci_checker: Suspend tests passed OK
  525. [ 1.473851] psci_checker: PSCI checker completed
  526. [ 1.476024] Freeing unused kernel memory: 4736K
  527. [ 1.527423] Run /init as init process
  528. [ 1.527750] with arguments:
  529. [ 1.528011] /init
  530. [ 1.528213] with environment:
  531. [ 1.528488] HOME=/
  532. [ 1.528695] TERM=linux
  533. [ 1.528934] splash=verbose
  534. [ 1.529201] ubootpart=65b633bf-021f-b241-8f6a-d584d2513abd
  535. [ 1.529710] cgroup_enable=memory
  536. [ 1.530024] cgroup_memory=1
Advertisement
Add Comment
Please, Sign In to add comment