API tools faq
paste
Guest User

Untitled

a guest
Nov 3rd, 2022
85
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 55.48 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Linux version 4.9.224-5.9.vniins2.sparc64-e90s ([email protected]) (gcc version 4.1.3 20080704 (prerelease)) #1 SMP Sun Jun 6 22:42:13 MSK 2021
  2. [ 0.000000] prom_getbootargs() command line 0x0000000000edd7c8 : text lang=ru_RU.KOI8-R video=mgam83fb:1024x768@60 root=/dev/sda2 dospartlabel
  3. [ 0.000000] ARCH: SUN4U
  4. [ 0.000000] max_iolinks corrected = 8
  5. [ 0.000000] Base MAC address 98:a7:b0:00:00:00
  6. [ 0.000000] bootconsole [early_dump0] enabled
  7. [ 0.000000] found SMP MP-table at 0x00000000f04c8000
  8. [ 0.000000] MultiProcessor Specification v1.4
  9. [ 0.000000] Virtual Wire compatibility mode.
  10. [ 0.000000] OEM ID: LNXI
  11. [ 0.000000] Product ID: 440GX
  12. [ 0.000000] APIC at: 0xFEE00000
  13. [ 0.000000] Processor APIC ID #0 version 20
  14. [ 0.000000] Processor APIC ID #1 version 20
  15. [ 0.000000] Processor APIC ID #2 version 20
  16. [ 0.000000] Processor APIC ID #3 version 20
  17. [ 0.000000] Processor APIC ID #4 version 20
  18. [ 0.000000] Processor APIC ID #5 version 20
  19. [ 0.000000] Processor APIC ID #6 version 20
  20. [ 0.000000] Processor APIC ID #7 version 20
  21. [ 0.000000] IO link #0 on node 0, version 0xffff,
  22. [ 0.000000] connected to IOHUB: min bus #1 max bus #8 IO APIC ID 64
  23. [ 0.000000] Kernel unaligned access at TPC[e44f0c] MP_iolink_info+0xcc/0x180
  24. [ 0.000000] Kernel unaligned access at TPC[e44f1c] MP_iolink_info+0xdc/0x180
  25. [ 0.000000] Kernel unaligned access at TPC[e44f24] MP_iolink_info+0xe4/0x180
  26. [ 0.000000] Kernel unaligned access at TPC[e44f2c] MP_iolink_info+0xec/0x180
  27. [ 0.000000] Kernel unaligned access at TPC[e44f34] MP_iolink_info+0xf4/0x180
  28. [ 0.000000] System timer type 1 Version 1 at 0x401000.
  29. [ 0.000000] i2c_spi_info: control base addr = 0000000010000000, data base addr = 0000000010000040, IRQ 15 IOHUB revision 07
  30. [ 0.000000] IOAPIC[0]: apic_id 64, version 17, address 0x200100, GSI 0-23
  31. [ 0.000000] Processors: 8
  32. [ 0.000000] nr_irqs_gsi: 24
  33. [ 0.000000] Kernel: Using 3 locked TLB entries for main kernel image.
  34. [ 0.000000] Remapping the kernel...
  35. [ 0.000000] done.
  36. [ 0.000000] Allocated 24576 bytes for kernel page tables.
  37. [ 0.000000] Zone ranges:
  38. [ 0.000000] Normal [mem 0x0000000080000000-0x000000047fffffff]
  39. [ 0.000000] Movable zone start for each node
  40. [ 0.000000] Early memory node ranges
  41. [ 0.000000] node 0: [mem 0x0000000080000000-0x000000047fffffff]
  42. [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000047fffffff]
  43. [ 0.000000] On node 0 totalpages: 2097152
  44. [ 0.000000] Normal zone: 18432 pages used for memmap
  45. [ 0.000000] Normal zone: 0 pages reserved
  46. [ 0.000000] Normal zone: 2097152 pages, LIFO batch:15
  47. [ 0.000000] Booting Linux...
  48. [ 0.000000] CPU CAPS: [flush,stbar,swap,muldiv,v9,ultra3,mul32,div32]
  49. [ 0.000000] CPU CAPS: [v8plus,vis,vis2]
  50. [ 0.000000] DevTree: disabled (incorrect magic): 9de3bf40
  51. [ 0.000000] DevTree: device tree size is 0
  52. [ 0.000000] percpu: Embedded 9 pages/cpu s34816 r8192 d30720 u524288
  53. [ 0.000000] pcpu-alloc: s34816 r8192 d30720 u524288 alloc=1*4194304
  54. [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
  55. [ 0.000000] CPU[0]: Caches D[sz(32768):line_sz(64)] I[sz(16384):line_sz(64)] E[sz(2097152):line_sz(64)]
  56. [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2078720
  57. [ 0.000000] Policy zone: Normal
  58. [ 0.000000] Kernel command line: text lang=ru_RU.KOI8-R video=mgam83fb:1024x768@60 root=/dev/sda2 dospartlabel
  59. [ 0.000000] PID hash table entries: 4096 (order: 2, 32768 bytes)
  60. [ 0.000000] Sorting __ex_table...
  61. [ 0.000000] Memory: 16588176K/16777216K available (7373K kernel code, 837K rwdata, 2208K rodata, 624K init, 608K bss, 189040K reserved, 0K cma-reserved)
  62. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=4
  63. [ 0.000000] Hierarchical RCU implementation.
  64. [ 0.000000] Build-time adjustment of leaf fanout to 64.
  65. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
  66. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
  67. [ 0.000000] NR_IRQS:768 nr_irqs:410 0
  68. [ 0.000000] Switched APIC routing to physical flat.
  69. [ 0.000000] Console: colour dummy device 80x25
  70. [ 0.000000] console [tty0] enabled
  71. [ 0.000000] bootconsole [early_dump0] disabled
  72. [ 0.000000] Zilog: console probe ...
  73. [ 0.000000] Zilog: console init port 0, control_reg = 0x401040
  74. [ 0.000000] Zilog: console init port 1, control_reg = 0x401042
  75. [ 0.000000] found
  76. [ 0.000000] Node #0 IO LINK #0 is IO HUB controller ON connected to unknown controller
  77. [ 0.160000] Calibrating delay using timer specific routine.. 200.19 BogoMIPS (lpj=1000999)
  78. [ 0.160000] pid_max: default: 32768 minimum: 301
  79. [ 0.160000] Security Framework initialized
  80. [ 0.160000] MCBC: Initializing.
  81. [ 0.160000] Dentry cache hash table entries: 2097152 (order: 11, 16777216 bytes)
  82. [ 0.170000] Inode-cache hash table entries: 1048576 (order: 10, 8388608 bytes)
  83. [ 0.180000] Mount-cache hash table entries: 32768 (order: 5, 262144 bytes)
  84. [ 0.180000] Mountpoint-cache hash table entries: 32768 (order: 5, 262144 bytes)
  85. [ 0.180000] ftrace: allocating 24720 entries in 49 pages
  86. [ 0.220000] CPU: Unknown chip, impl[0x17] vers[0x14]
  87. [ 0.220000] FPU: Unknown chip, impl[0x17] vers[0x14]
  88. [ 0.010000] CPU[1]: Caches D[sz(32768):line_sz(64)] I[sz(16384):line_sz(64)] E[sz(2097152):line_sz(64)]
  89. [ 0.010000] CPU[2]: Caches D[sz(32768):line_sz(64)] I[sz(16384):line_sz(64)] E[sz(2097152):line_sz(64)]
  90. [ 0.010000] CPU[3]: Caches D[sz(32768):line_sz(64)] I[sz(16384):line_sz(64)] E[sz(2097152):line_sz(64)]
  91. [ 0.010000] CPU[4]: Caches D[sz(32768):line_sz(64)] I[sz(16384):line_sz(64)] E[sz(2097152):line_sz(64)]
  92. [ 0.010000] CPU[5]: Caches D[sz(32768):line_sz(64)] I[sz(16384):line_sz(64)] E[sz(2097152):line_sz(64)]
  93. [ 0.010000] CPU[6]: Caches D[sz(32768):line_sz(64)] I[sz(16384):line_sz(64)] E[sz(2097152):line_sz(64)]
  94. [ 0.010000] CPU[7]: Caches D[sz(32768):line_sz(64)] I[sz(16384):line_sz(64)] E[sz(2097152):line_sz(64)]
  95. [ 1.270000] Brought up 8 CPUs
  96. [ 1.270000] CPU 1: synchronized TICK with master CPU (last diff 0 cycles, maxerr 23 cycles)
  97. [ 1.270000] CYCLES_SYNC ERR cpu1: slv=0xc2a52d000 mst=0x163af2041
  98. [ 1.270000] CPU 2: synchronized TICK with master CPU (last diff 1 cycles, maxerr 23 cycles)
  99. [ 1.270000] CYCLES_SYNC ERR cpu2: slv=0xc28e93800 mst=0x163af5840
  100. [ 1.270000] CPU 3: synchronized TICK with master CPU (last diff 1 cycles, maxerr 23 cycles)
  101. [ 1.270000] CYCLES_SYNC ERR cpu3: slv=0xc27fe4000 mst=0x163af9044
  102. [ 1.270000] CPU 4: synchronized TICK with master CPU (last diff -1 cycles, maxerr 69 cycles)
  103. [ 1.270000] CYCLES_SYNC ERR cpu4: slv=0xc27158800 mst=0x163b00055
  104. [ 1.270000] CPU 5: synchronized TICK with master CPU (last diff 0 cycles, maxerr 70 cycles)
  105. [ 1.270000] CYCLES_SYNC ERR cpu5: slv=0xc25219000 mst=0x163b07053
  106. [ 1.270000] CPU 6: synchronized TICK with master CPU (last diff 0 cycles, maxerr 70 cycles)
  107. [ 1.270000] CYCLES_SYNC ERR cpu6: slv=0xc23ce9800 mst=0x163b0e051
  108. [ 1.270000] CPU 7: synchronized TICK with master CPU (last diff 2 cycles, maxerr 70 cycles)
  109. [ 1.270000] CYCLES_SYNC ERR cpu7: slv=0xc22e5c800 mst=0x163b15056
  110. [ 1.270000] devtmpfs: initialized
  111. [ 1.280000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  112. [ 1.280000] futex hash table entries: 2048 (order: 4, 131072 bytes)
  113. [ 1.280000] NET: Registered protocol family 16
  114. [ 1.330023] cpuidle: using governor ladder
  115. [ 1.450020] cpuidle: using governor menu
  116. [ 1.450164] PCI: Using Elbrus configuration type
  117. [ 1.450189] clocksource: lt: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 191126044627 ns
  118. [ 59.853693] clocksource: clkr: mask: 0xffffffffffffffff max_cycles: 0x1710238ad0, max_idle_ns: 440795203240 ns
  119. [ 59.943953] HugeTLB registered 8 MB page size, pre-allocated 0 pages
  120. [ 59.945018] vgaarb: loaded
  121. [ 59.945344] SCSI subsystem initialized
  122. [ 59.945572] libata version 3.00 loaded.
  123. [ 59.945862] usbcore: registered new interface driver usbfs
  124. [ 59.945944] usbcore: registered new interface driver hub
  125. [ 59.946072] usbcore: registered new device driver usb
  126. [ 59.946234] pps_core: LinuxPPS API ver. 1 registered
  127. [ 59.946255] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  128. [ 59.946310] PTP clock support registered
  129. [ 59.946818] PCI host bridge to bus 0000:00
  130. [ 59.946835] pci_bus 0000:00: root bus resource [io 0xff20000000-0xffffffffffffffff] (bus address [0x0000-0xffffff00dfffffff])
  131. [ 59.946843] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffffffffffff]
  132. [ 59.946874] pci 0000:00:00.0: [1fff:8017] type 01 class 0x060400
  133. [ 59.946909] pci 0000:00:00.0: reg 0x10: [mem 0x00100000-0x0010003f 64bit]
  134. [ 59.946950] pci_msi_setup_pci_dev 0000:00:00.0: msix_cap = 0
  135. [ 59.947210] pci_bus 0000:01: busn_res: can not insert [bus 01-08] under [??? 0x00000000 flags 0x0] (conflicts with (null) [??? 0x00000000 flags 0x0])
  136. [ 59.947230] pci 0000:01:00.0: [1fff:8000] type 01 class 0x060400
  137. [ 59.947272] pci_msi_setup_pci_dev 0000:01:00.0: msix_cap = 0
  138. [ 59.947409] pci 0000:01:01.0: [1fff:8016] type 00 class 0x020000
  139. [ 59.947429] pci 0000:01:01.0: reg 0x10: [mem 0x00200000-0x0020001f]
  140. [ 59.947482] pci_msi_setup_pci_dev 0000:01:01.0: msix_cap = 0
  141. [ 59.947614] pci 0000:01:01.1: [1fff:8016] type 00 class 0x020000
  142. [ 59.947634] pci 0000:01:01.1: reg 0x10: [mem 0x00200020-0x0020003f]
  143. [ 59.947687] pci_msi_setup_pci_dev 0000:01:01.1: msix_cap = 0
  144. [ 59.947837] pci 0000:01:01.2: [1fff:8016] type 00 class 0x020000
  145. [ 59.947857] pci 0000:01:01.2: reg 0x10: [mem 0x00200040-0x0020005f]
  146. [ 59.947910] pci_msi_setup_pci_dev 0000:01:01.2: msix_cap = 0
  147. [ 59.948049] pci 0000:01:02.0: [1fff:800b] type 00 class 0x01018f
  148. [ 59.948068] pci 0000:01:02.0: reg 0x10: [io 0xff20001000-0xff20001007]
  149. [ 59.948082] pci 0000:01:02.0: reg 0x14: [io 0xff20001008-0xff2000100b]
  150. [ 59.948096] pci 0000:01:02.0: reg 0x18: [io 0xff20001010-0xff20001017]
  151. [ 59.948110] pci 0000:01:02.0: reg 0x1c: [io 0xff20001018-0xff2000101b]
  152. [ 59.948123] pci 0000:01:02.0: reg 0x20: [io 0xff20001020-0xff2000102f]
  153. [ 59.948150] pci_msi_setup_pci_dev 0000:01:02.0: msix_cap = 0
  154. [ 59.948289] pci 0000:01:02.1: [1fff:8018] type 00 class 0x070200
  155. [ 59.948309] pci 0000:01:02.1: reg 0x10: [mem 0x10000000-0x1000003f pref]
  156. [ 59.948323] pci 0000:01:02.1: reg 0x14: [mem 0x10000040-0x1000007f pref]
  157. [ 59.948367] pci 0000:01:02.1: MSI address at: 0x300000; IOHUB generation:1,revision 7
  158. [ 59.948376] pci_msi_setup_pci_dev 0000:01:02.1: msix_cap = 0
  159. [ 59.948524] pci 0000:01:02.2: [1fff:8019] type 00 class 0x078000
  160. [ 59.948542] pci 0000:01:02.2: reg 0x10: [io 0xff20001040-0xff2000105f]
  161. [ 59.948555] pci 0000:01:02.2: reg 0x14: [mem 0x00401040-0x0040104f]
  162. [ 59.948597] pci_msi_setup_pci_dev 0000:01:02.2: msix_cap = 0
  163. [ 59.948735] pci 0000:01:02.3: [1fff:800a] type 00 class 0x040100
  164. [ 59.948753] pci 0000:01:02.3: reg 0x10: [mem 0x00404000-0x00407fff]
  165. [ 59.948802] pci_msi_setup_pci_dev 0000:01:02.3: msix_cap = 0
  166. [ 59.948939] pci 0000:01:02.4: [1fff:8014] type 00 class 0x078000
  167. [ 59.948958] pci 0000:01:02.4: reg 0x10: [mem 0x00408000-0x0040801f]
  168. [ 59.948972] pci 0000:01:02.4: reg 0x14: [mem 0x00408080-0x004080ff]
  169. [ 59.949015] pci_msi_setup_pci_dev 0000:01:02.4: msix_cap = 0
  170. [ 59.949168] pci 0000:01:03.0: [1fff:801a] type 00 class 0x010601
  171. [ 59.949186] pci 0000:01:03.0: reg 0x10: [io 0xff20001060-0xff20001067]
  172. [ 59.949200] pci 0000:01:03.0: reg 0x14: [io 0xff20001070-0xff2000107f]
  173. [ 59.949213] pci 0000:01:03.0: reg 0x18: [io 0xff20001080-0xff20001087]
  174. [ 59.949226] pci 0000:01:03.0: reg 0x1c: [io 0xff20001090-0xff2000109f]
  175. [ 59.949239] pci 0000:01:03.0: reg 0x20: [io 0xff200010a0-0xff200010af]
  176. [ 59.949253] pci 0000:01:03.0: reg 0x24: [mem 0x0040a000-0x0040bfff]
  177. [ 59.949270] pci_msi_setup_pci_dev 0000:01:03.0: msix_cap = 0
  178. [ 59.949408] pci 0000:01:03.1: [1fff:801a] type 00 class 0x010601
  179. [ 59.949426] pci 0000:01:03.1: reg 0x10: [io 0xff200010b0-0xff200010b7]
  180. [ 59.949439] pci 0000:01:03.1: reg 0x14: [io 0xff200010c0-0xff200010cf]
  181. [ 59.949452] pci 0000:01:03.1: reg 0x18: [io 0xff200010d0-0xff200010d7]
  182. [ 59.949465] pci 0000:01:03.1: reg 0x1c: [io 0xff200010e0-0xff200010ef]
  183. [ 59.949478] pci 0000:01:03.1: reg 0x20: [io 0xff200010f0-0xff200010ff]
  184. [ 59.949491] pci 0000:01:03.1: reg 0x24: [mem 0x0040c000-0x0040dfff]
  185. [ 59.949509] pci_msi_setup_pci_dev 0000:01:03.1: msix_cap = 0
  186. [ 59.949661] pci 0000:01:04.0: [1fff:8010] type 01 class 0x060400
  187. [ 59.949685] pci 0000:01:04.0: reg 0x10: [mem 0x0040e000-0x0040e03f 64bit]
  188. [ 59.949719] pci_msi_setup_pci_dev 0000:01:04.0: msix_cap = 0
  189. [ 59.949743] pci 0000:01:04.0: supports D1
  190. [ 59.949749] pci 0000:01:04.0: PME# supported from D0 D1 D3hot D3cold
  191. [ 59.949907] pci 0000:01:05.0: [1fff:8010] type 01 class 0x060400
  192. [ 59.949931] pci 0000:01:05.0: reg 0x10: [mem 0x00800000-0x0080003f 64bit]
  193. [ 59.949965] pci_msi_setup_pci_dev 0000:01:05.0: msix_cap = 0
  194. [ 59.949988] pci 0000:01:05.0: supports D1
  195. [ 59.949994] pci 0000:01:05.0: PME# supported from D0 D1 D3hot D3cold
  196. [ 59.950140] pci 0000:01:06.0: [1fff:8010] type 01 class 0x060400
  197. [ 59.950163] pci 0000:01:06.0: reg 0x10: [mem 0x00900000-0x0090003f 64bit]
  198. [ 59.950197] pci_msi_setup_pci_dev 0000:01:06.0: msix_cap = 0
  199. [ 59.950220] pci 0000:01:06.0: supports D1
  200. [ 59.950226] pci 0000:01:06.0: PME# supported from D0 D1 D3hot D3cold
  201. [ 59.950372] pci 0000:01:07.0: [1fff:8010] type 01 class 0x060400
  202. [ 59.950396] pci 0000:01:07.0: reg 0x10: [mem 0x00a00000-0x00a0003f 64bit]
  203. [ 59.950429] pci_msi_setup_pci_dev 0000:01:07.0: msix_cap = 0
  204. [ 59.950453] pci 0000:01:07.0: supports D1
  205. [ 59.950459] pci 0000:01:07.0: PME# supported from D0 D1 D3hot D3cold
  206. [ 59.950614] pci 0000:01:08.0: [1fff:8011] type 01 class 0x060400
  207. [ 59.950638] pci 0000:01:08.0: reg 0x10: [mem 0x00b00000-0x00b0003f 64bit]
  208. [ 59.950670] pci_msi_setup_pci_dev 0000:01:08.0: msix_cap = 0
  209. [ 59.950694] pci 0000:01:08.0: supports D1
  210. [ 59.950699] pci 0000:01:08.0: PME# supported from D0 D1 D3hot D3cold
  211. [ 59.950846] pci 0000:01:09.0: [1fff:8011] type 01 class 0x060400
  212. [ 59.950869] pci 0000:01:09.0: reg 0x10: [mem 0x00c00000-0x00c0003f 64bit]
  213. [ 59.950902] pci_msi_setup_pci_dev 0000:01:09.0: msix_cap = 0
  214. [ 59.950924] pci 0000:01:09.0: supports D1
  215. [ 59.950930] pci 0000:01:09.0: PME# supported from D0 D1 D3hot D3cold
  216. [ 59.951081] pci 0000:01:0a.0: [1fff:8008] type 00 class 0x0c0310
  217. [ 59.951100] pci 0000:01:0a.0: reg 0x10: [mem 0x00d00000-0x00d00fff]
  218. [ 59.951150] pci_msi_setup_pci_dev 0000:01:0a.0: msix_cap = 0
  219. [ 59.951289] pci 0000:01:0a.1: [1fff:801e] type 00 class 0x0c0320
  220. [ 59.951308] pci 0000:01:0a.1: reg 0x10: [mem 0x00d01000-0x00d010ff]
  221. [ 59.951358] pci_msi_setup_pci_dev 0000:01:0a.1: msix_cap = 0
  222. [ 59.951509] pci 0000:01:0b.0: [1fff:8008] type 00 class 0x0c0310
  223. [ 59.951527] pci 0000:01:0b.0: reg 0x10: [mem 0x00d02000-0x00d02fff]
  224. [ 59.951577] pci_msi_setup_pci_dev 0000:01:0b.0: msix_cap = 0
  225. [ 59.951726] pci 0000:01:0b.1: [1fff:801e] type 00 class 0x0c0320
  226. [ 59.951745] pci 0000:01:0b.1: reg 0x10: [mem 0x00d03000-0x00d030ff]
  227. [ 59.951795] pci_msi_setup_pci_dev 0000:01:0b.1: msix_cap = 0
  228. [ 59.951947] pci 0000:01:0c.0: [1fff:800e] type 00 class 0x000000
  229. [ 59.952018] pci_msi_setup_pci_dev 0000:01:0c.0: msix_cap = 0
  230. [ 59.952187] pci 0000:00:00.0: PCI bridge to [bus 01-08]
  231. [ 59.952199] pci 0000:00:00.0: bridge window [io 0xff20001000-0xff20001fff]
  232. [ 59.952207] pci 0000:00:00.0: bridge window [mem 0x00200000-0x00dfffff]
  233. [ 59.952217] pci 0000:00:00.0: bridge window [mem 0x10000000-0x300fffff 64bit pref]
  234. [ 59.952369] pci 0000:01:00.0: PCI bridge to [bus 02]
  235. [ 59.952529] pci 0000:03:00.0: [126f:0768] type 00 class 0x030000
  236. [ 59.952558] pci 0000:03:00.0: reg 0x10: [mem 0x20000000-0x2fffffff pref]
  237. [ 59.952576] pci 0000:03:00.0: reg 0x14: [mem 0x00600000-0x007fffff]
  238. [ 59.952638] pci 0000:03:00.0: reg 0x30: [mem 0x30000000-0x3000ffff pref]
  239. [ 59.952676] pci_msi_setup_pci_dev 0000:03:00.0: msix_cap = 0
  240. [ 59.952716] pci 0000:03:00.0: supports D1
  241. [ 59.952721] pci 0000:03:00.0: PME# supported from D0 D1 D3hot D3cold
  242. [ 59.952839] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=none,locks=none
  243. [ 59.952875] pci 0000:01:04.0: PCI bridge to [bus 03]
  244. [ 59.952886] pci 0000:01:04.0: bridge window [mem 0x00500000-0x007fffff]
  245. [ 59.952896] pci 0000:01:04.0: bridge window [mem 0x10100000-0x300fffff 64bit pref]
  246. [ 59.953004] pci 0000:01:05.0: PCI bridge to [bus 04]
  247. [ 59.953119] pci 0000:01:06.0: PCI bridge to [bus 05]
  248. [ 59.953234] pci 0000:01:07.0: PCI bridge to [bus 06]
  249. [ 59.953357] pci 0000:01:08.0: PCI bridge to [bus 07]
  250. [ 59.953503] pci 0000:01:09.0: PCI bridge to [bus 08]
  251. [ 59.954294] PCI->APIC IRQ transform: (D0, B1,S0,F0, P0) -> 16
  252. [ 59.954350] PCI->APIC IRQ transform: (D0, B1,S4,F0, P0) -> 16
  253. [ 59.954359] PCI->APIC IRQ transform: (D0, B1,S5,F0, P0) -> 17
  254. [ 59.954368] PCI->APIC IRQ transform: (D0, B1,S6,F0, P0) -> 18
  255. [ 59.954377] PCI->APIC IRQ transform: (D0, B1,S7,F0, P0) -> 19
  256. [ 59.954386] PCI->APIC IRQ transform: (D0, B1,S8,F0, P0) -> 16
  257. [ 59.954395] PCI->APIC IRQ transform: (D0, B1,S9,F0, P0) -> 17
  258. [ 59.954430] PCI->APIC IRQ transform: (D0, B3,S0,F0, P0) -> 16
  259. [ 59.954461] MSI window 0x300000 + 0x100000. Reserved
  260. [ 59.954634] pci 0000:01:00.0: PCI bridge to [bus 02]
  261. [ 59.954664] pci 0000:03:00.0: BAR 6: assigned [mem 0x00500000-0x0050ffff pref]
  262. [ 59.954672] pci 0000:01:04.0: PCI bridge to [bus 03]
  263. [ 59.954682] pci 0000:01:04.0: bridge window [mem 0x00500000-0x007fffff]
  264. [ 59.954691] pci 0000:01:04.0: bridge window [mem 0x10100000-0x300fffff 64bit pref]
  265. [ 59.954702] pci 0000:01:05.0: PCI bridge to [bus 04]
  266. [ 59.954717] pci 0000:01:06.0: PCI bridge to [bus 05]
  267. [ 59.954732] pci 0000:01:07.0: PCI bridge to [bus 06]
  268. [ 59.954748] pci 0000:01:08.0: PCI bridge to [bus 07]
  269. [ 59.954762] pci 0000:01:09.0: PCI bridge to [bus 08]
  270. [ 59.954778] pci 0000:00:00.0: PCI bridge to [bus 01-08]
  271. [ 59.954786] pci 0000:00:00.0: bridge window [io 0xff20001000-0xff20001fff]
  272. [ 59.954795] pci 0000:00:00.0: bridge window [mem 0x00200000-0x00dfffff]
  273. [ 59.954803] pci 0000:00:00.0: bridge window [mem 0x10000000-0x300fffff 64bit pref]
  274. [ 59.954815] pci_bus 0000:00: resource 4 [io 0xff20000000-0xffffffffffffffff]
  275. [ 59.954822] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffffffffffff]
  276. [ 59.954829] pci_bus 0000:01: resource 0 [io 0xff20001000-0xff20001fff]
  277. [ 59.954835] pci_bus 0000:01: resource 1 [mem 0x00200000-0x00dfffff]
  278. [ 59.954842] pci_bus 0000:01: resource 2 [mem 0x10000000-0x300fffff 64bit pref]
  279. [ 59.954849] pci_bus 0000:03: resource 1 [mem 0x00500000-0x007fffff]
  280. [ 59.954856] pci_bus 0000:03: resource 2 [mem 0x10100000-0x300fffff 64bit pref]
  281. [ 59.955780] NetLabel: Initializing
  282. [ 59.955801] NetLabel: domain hash size = 128
  283. [ 59.955819] NetLabel: protocols = UNLABELED CIPSOv4
  284. [ 59.955911] NetLabel: unlabeled traffic allowed by default
  285. [ 59.955977] iommu:0:0: enabled; window size 2048 MiB
  286. [ 59.956397] clocksource: Switched to clocksource lt
  287. [ 59.988650] VFS: Disk quotas dquot_6.6.0
  288. [ 59.988756] VFS: Dquot-cache hash table entries: 1024 (order 0, 8192 bytes)
  289. [ 59.988976] FS-Cache: Loaded
  290. [ 59.997267] NET: Registered protocol family 2
  291. [ 59.998099] TCP established hash table entries: 131072 (order: 7, 1048576 bytes)
  292. [ 59.999261] TCP bind hash table entries: 65536 (order: 7, 1048576 bytes)
  293. [ 60.000035] TCP: Hash tables configured (established 131072 bind 65536)
  294. [ 60.000256] UDP hash table entries: 8192 (order: 5, 262144 bytes)
  295. [ 60.000546] UDP-Lite hash table entries: 8192 (order: 5, 262144 bytes)
  296. [ 60.001042] NET: Registered protocol family 1
  297. [ 60.001566] RPC: Registered named UNIX socket transport module.
  298. [ 60.001592] RPC: Registered udp transport module.
  299. [ 60.001611] RPC: Registered tcp transport module.
  300. [ 60.001630] RPC: Registered tcp NFSv4.1 backchannel transport module.
  301. [ 60.001653] PCI: CLS 4 bytes
  302. [ 60.001753] PCI: Setting latency timer of device 0000:00:00.0 to 64
  303. [ 60.136754] Trying to unpack rootfs image as initramfs...
  304. [ 60.160059] Freeing initrd memory: 456K
  305. [ 60.161040] hwmon pmcmon: node 0 hwmon device enabled - pmcmon
  306. [ 60.161117] pci 0000:01:02.4: allocated PCI BAR #0: base 0x408000
  307. [ 60.162506] pci 0000:01:02.4: l-gpio: L-GPIO support successfully loaded.
  308. [ 60.162849] i2c_spi 0000:01:02.1: probed
  309. [ 60.163000] l_i2c l_i2c.0: I2C adapter 0 registered
  310. [ 60.163094] l_i2c l_i2c.0: I2C adapter 1 registered
  311. [ 60.163189] l_i2c l_i2c.0: I2C adapter 2 registered
  312. [ 60.163297] l_i2c l_i2c.0: I2C adapter 3 registered
  313. [ 60.163543] l_spi l_spi.0: master is unqueued, this is deprecated
  314. [ 60.163570] l_spi l_spi.0: probed
  315. [ 60.164011] pci 0000:01:0c.0: acpi-spmc: ACPI-SPMC support successfully loaded.
  316. [ 60.164825] audit: initializing netlink subsys (disabled)
  317. [ 60.164916] audit: type=2000 audit(1.750:1): initialized
  318. [ 60.166016] workingset: timestamp_bits=44 max_order=21 bucket_order=0
  319. [ 60.179949] MCBC: Memory shredding disabled.
  320. [ 60.183489] Key type asymmetric registered
  321. [ 60.183512] Asymmetric key parser 'x509' registered
  322. [ 60.183737] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
  323. [ 60.183914] io scheduler noop registered
  324. [ 60.183935] io scheduler deadline registered
  325. [ 60.184142] io scheduler cfq registered (default)
  326. [ 60.184934] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
  327. [ 60.190254] Serial: 85c30 driver $ 2 ports, IRQ sharing enabled
  328. [ 60.190357] 0000:01:02.2: ttyS0 at MMIO 0x401040 (irq = 3, base_baud = 153600) is a Z85c30 ESCC - Serial port
  329. [ 60.190566] 0000:01:02.2: ttyS1 at MMIO 0x401042 (irq = 3, base_baud = 153600) is a Z85c30 ESCC - Serial port
  330. [ 60.190774] serial_zilog_probe: register IRQ #3 and set interrupt handler.
  331. [ 60.201951] brd: module loaded
  332. [ 60.201981] Uniform Multi-Platform E-IDE driver
  333. [ 60.202129] ELBRUS 0000:01:02.0: IDE controller (0x1fff:0x800b rev 0x00)
  334. [ 60.202200] 0000:01:02.0: Unmask interrupts
  335. [ 60.202225] ELBRUS 0000:01:02.0: 100% native mode on irq 11
  336. [ 60.202254] ide0: BM-DMA at 0xff20001020-0xff20001027
  337. [ 60.202297] ide1: BM-DMA at 0xff20001028-0xff2000102f
  338. [ 60.202333] Probing IDE interface ide0...
  339. [ 60.556616] hda: NDT-11-064, ATA DISK drive
  340. [ 61.396498] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
  341. [ 61.397261] hda: UDMA/100 mode selected
  342. [ 61.397319] Probing IDE interface ide1...
  343. [ 62.096508] ide0 at 0xff20001000-0xff20001007,0xff2000100a on irq 11
  344. [ 62.096944] ide1 at 0xff20001010-0xff20001017,0xff2000101a on irq 11
  345. [ 62.097366] ide-gd driver 1.18
  346. [ 62.097454] hda: max request size: 1024KiB
  347. [ 62.136598] hda: 125045424 sectors (64023 MB), CHS=16383/255/63
  348. [ 62.136695] hda: cache flushes supported
  349. [ 62.137452] hda: hda1 hda2 hda3
  350. [ 62.138326] ide-cd driver 5.00
  351. [ 62.139226] ahci 0000:01:03.0: version 3.0
  352. [ 62.139243] PCI: Enabling device 0000:01:03.0 (0006 -> 0007)
  353. [ 62.139358] ahci 0000:01:03.0: SSS flag set, parallel bus scan disabled
  354. [ 62.139421] ahci 0000:01:03.0: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0xf impl SATA mode
  355. [ 62.139459] ahci 0000:01:03.0: flags: sntf stag pm led pio slum part ccc apst
  356. [ 62.141556] scsi host0: ahci
  357. [ 62.142086] scsi host1: ahci
  358. [ 62.142511] scsi host2: ahci
  359. [ 62.142922] scsi host3: ahci
  360. [ 62.143152] ata1: SATA max UDMA/133 abar m8192@0x40a000 port 0x40a100 irq 20
  361. [ 62.143178] ata2: SATA max UDMA/133 abar m8192@0x40a000 port 0x40a180 irq 20
  362. [ 62.143203] ata3: SATA max UDMA/133 abar m8192@0x40a000 port 0x40a200 irq 20
  363. [ 62.143227] ata4: SATA max UDMA/133 abar m8192@0x40a000 port 0x40a280 irq 20
  364. [ 62.143325] PCI: Enabling device 0000:01:03.1 (0006 -> 0007)
  365. [ 62.143428] ahci 0000:01:03.1: SSS flag set, parallel bus scan disabled
  366. [ 62.143486] ahci 0000:01:03.1: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0xf impl SATA mode
  367. [ 62.143523] ahci 0000:01:03.1: flags: sntf stag pm led pio slum part ccc apst
  368. [ 62.146186] scsi host4: ahci
  369. [ 62.146727] scsi host5: ahci
  370. [ 62.147186] scsi host6: ahci
  371. [ 62.147608] scsi host7: ahci
  372. [ 62.147838] ata5: SATA max UDMA/133 abar m8192@0x40c000 port 0x40c100 irq 21
  373. [ 62.147865] ata6: SATA max UDMA/133 abar m8192@0x40c000 port 0x40c180 irq 21
  374. [ 62.147889] ata7: SATA max UDMA/133 abar m8192@0x40c000 port 0x40c200 irq 21
  375. [ 62.147914] ata8: SATA max UDMA/133 abar m8192@0x40c000 port 0x40c280 irq 21
  376. [ 62.148497] libphy: Fixed MDIO Bus: probed
  377. [ 62.149624] l_e1000: l_e1000_nort.c: v2.00 20.02.2020 [email protected], [email protected]
  378. [ 62.149694] l_e1000 0000:01:01.0: initializing PCI device 1fff:8016
  379. [ 62.149738] PCI: Setting latency timer of device 0000:01:01.0 to 64
  380. [ 62.150460] pps pps0: new PPS source ptp0
  381. [ 62.157893] libphy: l_e1000 mdio: probed
  382. [ 62.157996] l_e1000 0000:01:01.0: phy in COPPER mode
  383. [ 62.267555] l_e1000 0000:01:01.0: found phy id 0x01410CC2 - Marvell 88E1111
  384. [ 62.267584] l_e1000 0000:01:01.0: register mdiobus l_e1000-108 with phy l_e1000-108:01
  385. [ 62.267628] l_e1000 0000:01:01.0: registered as l_e1000 (rev. 0)
  386. [ 62.267681] l_e1000 0000:01:01.1: initializing PCI device 1fff:8016
  387. [ 62.267720] PCI: Setting latency timer of device 0000:01:01.1 to 64
  388. [ 62.268368] pps pps1: new PPS source ptp1
  389. [ 62.268533] Save MAC[5]:01 for device 0000:01:01.1
  390. [ 62.275629] libphy: l_e1000 mdio: probed
  391. [ 62.275729] l_e1000 0000:01:01.1: phy in COPPER mode
  392. [ 62.367561] l_e1000 0000:01:01.1: found phy id 0x01410CC2 - Marvell 88E1111
  393. [ 62.367587] l_e1000 0000:01:01.1: register mdiobus l_e1000-109 with phy l_e1000-109:01
  394. [ 62.367626] l_e1000 0000:01:01.1: registered as l_e1000 (rev. 0)
  395. [ 62.367671] l_e1000 0000:01:01.2: initializing PCI device 1fff:8016
  396. [ 62.367706] PCI: Setting latency timer of device 0000:01:01.2 to 64
  397. [ 62.368318] pps pps2: new PPS source ptp2
  398. [ 62.368483] Save MAC[5]:02 for device 0000:01:01.2
  399. [ 62.375559] libphy: l_e1000 mdio: probed
  400. [ 62.375658] l_e1000 0000:01:01.2: phy in FIBER mode
  401. [ 62.467543] l_e1000 0000:01:01.2: found phy id 0x01410CC2 - Marvell 88E1111
  402. [ 62.467569] l_e1000 0000:01:01.2: register mdiobus l_e1000-10a with phy l_e1000-10a:01
  403. [ 62.467608] l_e1000 0000:01:01.2: registered as l_e1000 (rev. 0)
  404. [ 62.467734] sky2: driver version 1.30
  405. [ 62.467894] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
  406. [ 62.468062] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  407. [ 62.468095] ehci_hcd: block sizes: qh 144 qtd 96 itd 192 sitd 96
  408. [ 62.468099] ehci-pci: EHCI PCI platform driver
  409. [ 62.468245] ehci-pci 0000:01:0a.1: EHCI Host Controller
  410. [ 62.468433] ehci-pci 0000:01:0a.1: new USB bus registered, assigned bus number 1
  411. [ 62.468535] ehci-pci 0000:01:0a.1: park 0
  412. [ 62.468551] ehci-pci 0000:01:0a.1: Enabling legacy PCI PM
  413. [ 62.468580] ehci-pci 0000:01:0a.1: cache line size of 4 is not supported
  414. [ 62.468614] ehci-pci 0000:01:0a.1: irq 12, io mem 0x00d01000
  415. [ 62.468882] ata1.00: ATA-9: TS128GMTS400I, P1225CH1, max UDMA/133
  416. [ 62.468918] ata1.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 0/32)
  417. [ 62.469603] ata1.00: configured for UDMA/133
  418. [ 62.470397] scsi 0:0:0:0: Direct-Access ATA TS128GMTS400I 5CH1 PQ: 0 ANSI: 5
  419. [ 62.477896] ata5: SATA link down (SStatus 0 SControl 330)
  420. [ 62.496406] ehci-pci 0000:01:0a.1: USB 2.0 started, EHCI 1.00
  421. [ 62.496783] usb usb1: udev 1, busnum 1, minor = 0
  422. [ 62.496791] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  423. [ 62.496819] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  424. [ 62.496851] usb usb1: Product: EHCI Host Controller
  425. [ 62.496874] usb usb1: Manufacturer: Linux 4.9.224-5.9.vniins2.sparc64-e90s ehci_hcd
  426. [ 62.496905] usb usb1: SerialNumber: 0000:01:0a.1
  427. [ 62.497411] hub 1-0:1.0: USB hub found
  428. [ 62.497476] hub 1-0:1.0: 4 ports detected
  429. [ 62.497501] hub 1-0:1.0: standalone hub
  430. [ 62.497506] hub 1-0:1.0: no power switching (usb 1.0)
  431. [ 62.497512] hub 1-0:1.0: individual port over-current protection
  432. [ 62.497519] hub 1-0:1.0: power on to power good time: 20ms
  433. [ 62.497599] hub 1-0:1.0: local power source is good
  434. [ 62.497744] hub 1-0:1.0: trying to enable port power on non-switchable hub
  435. [ 62.498116] ehci-pci 0000:01:0b.1: EHCI Host Controller
  436. [ 62.498301] ehci-pci 0000:01:0b.1: new USB bus registered, assigned bus number 2
  437. [ 62.498398] ehci-pci 0000:01:0b.1: park 0
  438. [ 62.498411] ehci-pci 0000:01:0b.1: Enabling legacy PCI PM
  439. [ 62.498439] ehci-pci 0000:01:0b.1: cache line size of 4 is not supported
  440. [ 62.498464] ehci-pci 0000:01:0b.1: irq 13, io mem 0x00d03000
  441. [ 62.536399] ehci-pci 0000:01:0b.1: USB 2.0 started, EHCI 1.00
  442. [ 62.536697] usb usb2: udev 1, busnum 2, minor = 128
  443. [ 62.536704] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  444. [ 62.536732] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  445. [ 62.536764] usb usb2: Product: EHCI Host Controller
  446. [ 62.536786] usb usb2: Manufacturer: Linux 4.9.224-5.9.vniins2.sparc64-e90s ehci_hcd
  447. [ 62.536818] usb usb2: SerialNumber: 0000:01:0b.1
  448. [ 62.537294] hub 2-0:1.0: USB hub found
  449. [ 62.537353] hub 2-0:1.0: 4 ports detected
  450. [ 62.537377] hub 2-0:1.0: standalone hub
  451. [ 62.537383] hub 2-0:1.0: no power switching (usb 1.0)
  452. [ 62.537388] hub 2-0:1.0: individual port over-current protection
  453. [ 62.537394] hub 2-0:1.0: power on to power good time: 20ms
  454. [ 62.537473] hub 2-0:1.0: local power source is good
  455. [ 62.537602] hub 2-0:1.0: trying to enable port power on non-switchable hub
  456. [ 62.537947] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  457. [ 62.537971] ohci_hcd: block sizes: ed 112 td 96
  458. [ 62.537987] ohci-pci: OHCI PCI platform driver
  459. [ 62.538067] ohci-pci 0000:01:0a.0: OHCI PCI host controller
  460. [ 62.538249] ohci-pci 0000:01:0a.0: new USB bus registered, assigned bus number 3
  461. [ 62.538355] ohci-pci 0000:01:0a.0: created debug files
  462. [ 62.538374] ohci-pci 0000:01:0a.0: irq 12, io mem 0x00d00000
  463. [ 62.606422] ohci-pci 0000:01:0a.0: OHCI controller state
  464. [ 62.606428] ohci-pci 0000:01:0a.0: rhsc
  465. [ 62.606433] ohci-pci 0000:01:0a.0: OHCI 1.0, NO legacy support registers, rh state running
  466. [ 62.606441] ohci-pci 0000:01:0a.0: control 0x083 HCFS=operational CBSR=3
  467. [ 62.606450] ohci-pci 0000:01:0a.0: cmdstatus 0x00000 SOC=0
  468. [ 62.606458] ohci-pci 0000:01:0a.0: intrstatus 0x00000000
  469. [ 62.606467] ohci-pci 0000:01:0a.0: intrenable 0x8000005a MIE RHSC UE RD WDH
  470. [ 62.606476] ohci-pci 0000:01:0a.0: hcca frame #0000
  471. [ 62.606483] usb usb1-port2: status 0501 change 0001
  472. [ 62.606489] ohci-pci 0000:01:0a.0: roothub.a 00000204 POTPGT=0 NPS NDP=4(4)
  473. [ 62.606495] ohci-pci 0000:01:0a.0: roothub.b 00000000 PPCM=0000 DR=0000
  474. [ 62.606503] ohci-pci 0000:01:0a.0: roothub.status 00008000 DRWE
  475. [ 62.606513] ohci-pci 0000:01:0a.0: roothub.portstatus [0] 0x00000100 PPS
  476. [ 62.606521] ohci-pci 0000:01:0a.0: roothub.portstatus [1] 0x00000100 PPS
  477. [ 62.606530] ohci-pci 0000:01:0a.0: roothub.portstatus [2] 0x00000100 PPS
  478. [ 62.606539] ohci-pci 0000:01:0a.0: roothub.portstatus [3] 0x00000100 PPS
  479. [ 62.606825] usb usb3: udev 1, busnum 3, minor = 256
  480. [ 62.606833] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
  481. [ 62.606860] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  482. [ 62.606892] usb usb3: Product: OHCI PCI host controller
  483. [ 62.606914] usb usb3: Manufacturer: Linux 4.9.224-5.9.vniins2.sparc64-e90s ohci_hcd
  484. [ 62.606946] usb usb3: SerialNumber: 0000:01:0a.0
  485. [ 62.607396] hub 3-0:1.0: USB hub found
  486. [ 62.607462] hub 3-0:1.0: 4 ports detected
  487. [ 62.607495] hub 3-0:1.0: standalone hub
  488. [ 62.607500] hub 3-0:1.0: no power switching (usb 1.0)
  489. [ 62.607506] hub 3-0:1.0: global over-current protection
  490. [ 62.607512] hub 3-0:1.0: power on to power good time: 0ms
  491. [ 62.607591] hub 3-0:1.0: local power source is good
  492. [ 62.607597] hub 3-0:1.0: no over-current condition exists
  493. [ 62.607705] hub 3-0:1.0: trying to enable port power on non-switchable hub
  494. [ 62.608091] ohci-pci 0000:01:0b.0: OHCI PCI host controller
  495. [ 62.608326] ohci-pci 0000:01:0b.0: new USB bus registered, assigned bus number 4
  496. [ 62.608420] ohci-pci 0000:01:0b.0: created debug files
  497. [ 62.608448] ohci-pci 0000:01:0b.0: irq 13, io mem 0x00d02000
  498. [ 62.617015] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
  499. [ 62.617550] sd 0:0:0:0: [sda] Write Protect is off
  500. [ 62.617585] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  501. [ 62.617715] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  502. [ 62.620150] sda: sda1 sda2 sda3
  503. [ 62.621891] sd 0:0:0:0: [sda] Attached SCSI disk
  504. [ 62.646543] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
  505. [ 62.676437] ohci-pci 0000:01:0b.0: OHCI controller state
  506. [ 62.676445] ohci-pci 0000:01:0b.0: rhsc
  507. [ 62.676451] ohci-pci 0000:01:0b.0: OHCI 1.0, NO legacy support registers, rh state running
  508. [ 62.676459] ohci-pci 0000:01:0b.0: control 0x083 HCFS=operational CBSR=3
  509. [ 62.676468] ohci-pci 0000:01:0b.0: cmdstatus 0x00000 SOC=0
  510. [ 62.676477] ohci-pci 0000:01:0b.0: intrstatus 0x00000000
  511. [ 62.676485] ohci-pci 0000:01:0b.0: intrenable 0x8000005a MIE RHSC UE RD WDH
  512. [ 62.676494] ohci-pci 0000:01:0b.0: hcca frame #0000
  513. [ 62.676504] ohci-pci 0000:01:0b.0: roothub.a 00000204 POTPGT=0 NPS NDP=4(4)
  514. [ 62.676511] ohci-pci 0000:01:0b.0: roothub.b 00000000 PPCM=0000 DR=0000
  515. [ 62.676519] ohci-pci 0000:01:0b.0: roothub.status 00008000 DRWE
  516. [ 62.676529] ohci-pci 0000:01:0b.0: roothub.portstatus [0] 0x00000100 PPS
  517. [ 62.676537] ohci-pci 0000:01:0b.0: roothub.portstatus [1] 0x00000100 PPS
  518. [ 62.676546] ohci-pci 0000:01:0b.0: roothub.portstatus [2] 0x00000100 PPS
  519. [ 62.676555] ohci-pci 0000:01:0b.0: roothub.portstatus [3] 0x00000100 PPS
  520. [ 62.676840] usb usb4: udev 1, busnum 4, minor = 384
  521. [ 62.676849] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
  522. [ 62.676876] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  523. [ 62.676908] usb usb4: Product: OHCI PCI host controller
  524. [ 62.676931] usb usb4: Manufacturer: Linux 4.9.224-5.9.vniins2.sparc64-e90s ohci_hcd
  525. [ 62.676962] usb usb4: SerialNumber: 0000:01:0b.0
  526. [ 62.677457] hub 4-0:1.0: USB hub found
  527. [ 62.677525] hub 4-0:1.0: 4 ports detected
  528. [ 62.677557] hub 4-0:1.0: standalone hub
  529. [ 62.677563] hub 4-0:1.0: no power switching (usb 1.0)
  530. [ 62.677568] hub 4-0:1.0: global over-current protection
  531. [ 62.677574] hub 4-0:1.0: power on to power good time: 0ms
  532. [ 62.677650] hub 4-0:1.0: local power source is good
  533. [ 62.677657] hub 4-0:1.0: no over-current condition exists
  534. [ 62.677771] hub 4-0:1.0: trying to enable port power on non-switchable hub
  535. [ 62.678286] usbcore: registered new interface driver usb-storage
  536. [ 62.678580] mousedev: PS/2 mouse device common for all mice
  537. [ 62.679212] rtc-cy14b101p spi0.1: rtc core: registered cy14b101p as rtc0
  538. [ 62.679311] rtc CY14B101P Oscillator Fail Flag is set. rtc= 2022-06-19 00:13:27 UTC. Sleeping 2 secs for oscillator run.
  539. [ 62.716411] hub 1-0:1.0: state 7 ports 4 chg 0004 evt 0000
  540. [ 62.716458] usb usb1-port2: status 0501, change 0000, 480 Mb/s
  541. [ 62.716485] ehci-pci 0000:01:0a.1: port 2 low speed --> companion
  542. [ 62.716508] ohci-pci 0000:01:0a.0: rhsc
  543. [ 62.716537] hub 3-0:1.0: state 7 ports 4 chg 0000 evt 0000
  544. [ 62.726425] hub 3-0:1.0: state 7 ports 4 chg 0000 evt 0004
  545. [ 62.726441] ohci-pci 0000:01:0a.0: GetStatus roothub.portstatus [1] = 0x00010301 CSC LSDA PPS CCS
  546. [ 62.726505] usb usb3-port2: status 0301, change 0001, 1.5 Mb/s
  547. [ 62.796425] usb usb1-port2: not reset yet, waiting 50ms
  548. [ 62.796526] hub 4-0:1.0: state 7 ports 4 chg 0000 evt 0000
  549. [ 62.866436] usb usb1-port2: not reset yet, waiting 200ms
  550. [ 62.926440] usb usb3-port2: debounce total 100ms stable 100ms status 0x301
  551. [ 62.947945] ata2: SATA link down (SStatus 0 SControl 330)
  552. [ 63.056415] ohci-pci 0000:01:0a.0: GetStatus roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS
  553. [ 63.086443] usb usb1-port2: not reset yet, waiting 200ms
  554. [ 63.126415] usb 3-2: new low-speed USB device number 2 using ohci-pci
  555. [ 63.256411] ohci-pci 0000:01:0a.0: GetStatus roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS
  556. [ 63.277969] ata3: SATA link down (SStatus 0 SControl 330)
  557. [ 63.306440] usb usb1-port2: not reset yet, waiting 200ms
  558. [ 63.393478] usb 3-2: udev 2, busnum 3, minor = 257
  559. [ 63.393486] usb 3-2: New USB device found, idVendor=046d, idProduct=c31c
  560. [ 63.393513] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  561. [ 63.393538] usb 3-2: Product: USB Keyboard
  562. [ 63.393559] usb 3-2: Manufacturer: Logitech
  563. [ 63.405644] hub 3-0:1.0: state 7 ports 4 chg 0000 evt 0004
  564. [ 63.526462] usb usb1-port2: not reset yet, waiting 200ms
  565. [ 63.526574] hub 1-0:1.0: state 7 ports 4 chg 0000 evt 0004
  566. [ 63.526637] usb usb1-port2: status 0100, change 0001, 12 Mb/s
  567. [ 63.607935] ata4: SATA link down (SStatus 0 SControl 330)
  568. [ 63.726438] usb usb1-port2: debounce total 100ms stable 100ms status 0x100
  569. [ 63.938002] ata6: SATA link down (SStatus 0 SControl 330)
  570. [ 64.267995] ata7: SATA link down (SStatus 0 SControl 330)
  571. [ 64.598027] ata8: SATA link down (SStatus 0 SControl 330)
  572. [ 64.726591] RTC is used for clocksource. Alarm functionality is disabled
  573. [ 64.726749] wd:
  574. [ 64.726759] set I2C-SPI watchdog timer
  575. [ 64.727147] hidraw: raw HID events driver (C) Jiri Kosina
  576. [ 64.733630] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:00.0/0000:01:0a.0/usb3/3-2/3-2:1.0/0003:046D:C31C.0001/input/input0
  577. [ 64.733706] ohci-pci 0000:01:0a.0: link ed fffff8046b886070 branch 0 [117us.], interval 8
  578. [ 64.796558] hid-generic 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:01:0a.0-2/input0
  579. [ 64.809708] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:00.0/0000:01:0a.0/usb3/3-2/3-2:1.1/0003:046D:C31C.0002/input/input1
  580. [ 64.809761] ohci-pci 0000:01:0a.0: link ed fffff8046b8860e0 branch 1 [92us.], interval 32
  581. [ 64.876534] hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:01:0a.0-2/input1
  582. [ 64.876649] usbcore: registered new interface driver usbhid
  583. [ 64.876671] usbhid: USB HID core driver
  584. [ 64.876933] NET: Registered protocol family 17
  585. [ 64.876989] Key type dns_resolver registered
  586. [ 64.877733] registered taskstats version 1
  587. [ 64.880907] Key type big_key registered
  588. [ 64.883993] Key type encrypted registered
  589. [ 64.884777] swapper/0/-1: settimeofday old=6 s 478401200 ns new=1655597609 s 500000000 ns delta=1655597603 s 21598800 ns
  590. [ 64.884846] rtc-cy14b101p spi0.1: setting system clock to 2022-06-19 00:13:29 UTC (1655597609)
  591. [ 64.885355] This architecture does not have kernel memory protection.
  592. [ 64.886507] audit: type=2080 audit(1655597609.500:2): <flags=1,exe="/bin/nash",ppid=0,pid=1,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=(none),ses=0> mount(path="/proc",path="/proc","proc",c0ed0000) = 0 (Success)
  593. [ 64.887344] audit: type=2080 audit(1655597609.500:3): <flags=1,exe="/bin/nash",ppid=0,pid=1,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=(none),ses=0> mount(path="/sys",path="/sys","sysfs",c0ed0000) = 0 (Success)
  594. [ 64.887775] audit: type=2080 audit(1655597609.500:4): <flags=1,exe="/bin/nash",ppid=0,pid=1,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=(none),ses=0> mount(path="/dev",path="/dev","tmpfs",c0ed0000) = 0 (Success)
  595. [ 64.958758] EXT4-fs (sda2): mounting ext3 file system using the ext4 subsystem
  596. [ 64.969681] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts:
  597. [ 64.969815] audit: type=2080 audit(1655597609.580:5): <flags=1,exe="/bin/nash",ppid=0,pid=1,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=(none),ses=0> mount(path="/dev/root",path="/sysroot","ext3",c0ed0001) = 0 (Success)
  598. [ 64.972035] audit: type=2080 audit(1655597609.580:6): <flags=1,exe="/bin/nash",ppid=0,pid=1,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=(none),ses=0> mount(path="/dev",path="/sysroot/dev",[null],1000) = 0 (Success)
  599. [ 64.975769] audit: type=2080 audit(1655597609.580:7): <flags=1,exe="/bin/nash",ppid=0,pid=1,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=(none),ses=0> mount(path="/proc",path="/sysroot/proc","proc",0) = 0 (Success)
  600. [ 64.977799] audit: type=2080 audit(1655597609.590:8): <flags=1,exe="/bin/nash",ppid=0,pid=1,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=(none),ses=0> mount(path="/sys",path="/sysroot/sys","sysfs",0) = 0 (Success)
  601. [ 65.046460] audit: type=2080 audit(1655597609.660:9): <flags=1,exe="/bin/nash",ppid=0,pid=1,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=(none),ses=0> umount(path="/dev",2) = 0 (Success)
  602. [ 65.126439] audit: type=2080 audit(1655597609.740:10): <flags=1,exe="/bin/nash",ppid=0,pid=1,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=(none),ses=0> umount(path="/proc",2) = 0 (Success)
  603. [ 65.186439] audit: type=2080 audit(1655597609.800:11): <flags=1,exe="/bin/nash",ppid=0,pid=1,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=(none),ses=0> umount(path="/sys",2) = 0 (Success)
  604. [ 65.188598] audit: type=2080 audit(1655597609.800:12): <flags=1,exe="/bin/nash",ppid=0,pid=1,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=(none),ses=0> mount(path="/sysroot",path="/",[null],2000) = 0 (Success)
  605. [ 65.188683] audit: type=2080 audit(1655597609.800:13): <flags=1,exe="/bin/nash",ppid=0,pid=1,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=(none),ses=0> chroot(path="/") = 0 (Success)
  606. [ 65.205082] random: fast init done
  607. [ 67.846446] clk_rt clocksource registation at cpu 1 clk_rt=65.374999994 sec, getnstod =1655597612.461649000 div=99997412 Hz
  608. [ 68.498229] audit: type=2080 audit(1655597613.110:14): <flags=2,exe="/bin/mount",ppid=909,pid=932,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=tty1,ses=0> mount(path="/proc/bus/usb",path="/proc/bus/usb","usbfs",c0ed0000) = -2 (Failure)
  609. [ 68.582265] warning: process `kmodule' used the deprecated sysctl system call with
  610. [ 68.582276] 1.
  611. [ 68.582280] 23.
  612. [ 68.582282]
  613. [ 69.378177] audit: type=2080 audit(1655597613.990:15): <flags=1,exe="/sbin/modprobe",ppid=909,pid=940,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=tty1,ses=0> init_module("led_class","") = 0 (Success)
  614. [ 69.380854] sdhci: Secure Digital Host Controller Interface driver
  615. [ 69.380858] sdhci: Copyright(c) Pierre Ossman
  616. [ 69.380898] audit: type=2080 audit(1655597613.990:16): <flags=1,exe="/sbin/modprobe",ppid=909,pid=940,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=tty1,ses=0> init_module("sdhci","") = 0 (Success)
  617. [ 69.382866] audit: type=2080 audit(1655597613.990:17): <flags=1,exe="/sbin/modprobe",ppid=909,pid=940,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=tty1,ses=0> init_module("sdhci_pci","") = 0 (Success)
  618. [ 69.979657] audit: type=2080 audit(1655597614.590:18): <flags=1,exe="/sbin/modprobe",ppid=909,pid=972,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=tty1,ses=0> init_module("soundcore","") = 0 (Success)
  619. [ 69.984374] audit: type=2080 audit(1655597614.590:19): <flags=1,exe="/sbin/modprobe",ppid=909,pid=972,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=tty1,ses=0> init_module("snd","") = 0 (Success)
  620. [ 70.143434] snd_hda_intel 0000:01:02.3: Force to snoop mode by module option
  621. [ 70.210493] 0-MPV KPI-2 IDs: DEV=0x8014 VEND=0x1fff REV=0x0 drv.ver.20404 IRQ 0=6 IRQ 1,2=9, BUS =0000:01:02.4, picoseconds per counter clock = 7999
  622. [ 70.210633] audit_printk_skb: 36 callbacks suppressed
  623. [ 70.210639] audit: type=2080 audit(1655597614.820:32): <flags=1,exe="/sbin/modprobe",ppid=909,pid=1008,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=tty1,ses=0> init_module("mpv","") = 0 (Success)
  624. [ 70.237270] audit: type=2080 audit(1655597614.850:33): <flags=1,exe="/sbin/modprobe",ppid=761,pid=995,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=(none),ses=0> init_module("snd_seq_dummy","") = 0 (Success)
  625. [ 70.240538] audit: type=2080 audit(1655597614.850:34): <flags=1,exe="/sbin/modprobe",ppid=909,pid=1018,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=tty1,ses=0> init_module("syscopyarea","") = 0 (Success)
  626. [ 70.241885] audit: type=2080 audit(1655597614.850:35): <flags=1,exe="/sbin/modprobe",ppid=909,pid=1018,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=tty1,ses=0> init_module("sysfillrect","") = 0 (Success)
  627. [ 70.243183] audit: type=2080 audit(1655597614.850:36): <flags=1,exe="/sbin/modprobe",ppid=909,pid=1018,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=tty1,ses=0> init_module("sysimgblt","") = 0 (Success)
  628. [ 70.244436] audit: type=2080 audit(1655597614.850:37): <flags=1,exe="/sbin/modprobe",ppid=909,pid=1018,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=tty1,ses=0> init_module("fb_sys_fops","") = 0 (Success)
  629. [ 70.258184] [drm] Initialized
  630. [ 70.258240] audit: type=2080 audit(1655597614.870:38): <flags=1,exe="/sbin/modprobe",ppid=909,pid=1018,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=tty1,ses=0> init_module("drm","") = 0 (Success)
  631. [ 70.265900] audit: type=2080 audit(1655597614.870:39): <flags=1,exe="/sbin/modprobe",ppid=909,pid=1018,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=tty1,ses=0> init_module("drm_kms_helper","") = 0 (Success)
  632. [ 70.267180] audit: type=2080 audit(1655597614.880:40): <flags=1,exe="/sbin/modprobe",ppid=733,pid=1006,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=(none),ses=0> init_module("snd_hda_codec_generic","") = 0 (Success)
  633. [ 70.270014] snd_hda_codec_cirrus hdaudioC0D0: autoconfig for CS4207: line_outs=3 (0x9/0xb/0xa/0x0/0x0) type:line
  634. [ 70.270023] snd_hda_codec_cirrus hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
  635. [ 70.270030] snd_hda_codec_cirrus hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
  636. [ 70.270036] snd_hda_codec_cirrus hdaudioC0D0: mono: mono_out=0x0
  637. [ 70.270042] snd_hda_codec_cirrus hdaudioC0D0: dig-out=0x10/0x15
  638. [ 70.270047] snd_hda_codec_cirrus hdaudioC0D0: inputs:
  639. [ 70.270056] snd_hda_codec_cirrus hdaudioC0D0: Mic=0xd
  640. [ 70.270062] snd_hda_codec_cirrus hdaudioC0D0: Line=0xc
  641. [ 70.270067] snd_hda_codec_cirrus hdaudioC0D0: dig-in=0x12
  642. [ 70.272338] audit: type=2080 audit(1655597614.880:41): <flags=1,exe="/sbin/modprobe",ppid=909,pid=1018,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=tty1,ses=0> init_module("ttm","") = 0 (Success)
  643. [ 70.281145] +-------------SMI Driver Information------------+
  644. [ 70.281150] Release type: Linux DRM Display Driver Release
  645. [ 70.281152] Driver version: v1.2.3.1
  646. [ 70.281155] Support products: SM750, SM768
  647. [ 70.281157] Support OS: All Linux distribution
  648. [ 70.281160] Support ARCH: x64, x86, mips
  649. [ 70.281162] +-----------------------------------------------+
  650. [ 70.281329] PCI: Setting latency timer of device 0000:01:04.0 to 64
  651. [ 70.281837] Found SM768 SOC Chip
  652. [ 70.364356] [TTM] Zone kernel: Available graphics memory: 8294628 kiB
  653. [ 70.364362] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
  654. [ 70.364366] [TTM] Initializing pool allocator
  655. [ 70.364421] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  656. [ 70.364424] [drm] No driver support for vblank timestamp query.
  657. [ 70.364722] input: HDA MCST Mic as /devices/pci0000:00/0000:00:00.0/0000:01:02.3/sound/card0/input2
  658. [ 70.364893] input: HDA MCST Line as /devices/pci0000:00/0000:00:00.0/0000:01:02.3/sound/card0/input3
  659. [ 70.365054] [drm] No panel or bridge found ...
  660. [ 70.365057] input: HDA MCST Line Out Front as /devices/pci0000:00/0000:00:00.0/0000:01:02.3/sound/card0/input4
  661. [ 70.365217] input: HDA MCST Line Out CLFE as /devices/pci0000:00/0000:00:00.0/0000:01:02.3/sound/card0/input5
  662. [ 70.896437] clocksource: clk_rt: mask: 0xfffffffffff max_cycles: 0xe6a175af17b, max_idle_ns: 7052728136059 ns
  663. [ 79.315930] [drm] fb mappable at 0x20000000
  664. [ 79.315934] [drm] vram aper at 0x20000000
  665. [ 79.315937] [drm] size 4153344
  666. [ 79.315940] [drm] fb depth is 16
  667. [ 79.315943] [drm] pitch is 3840
  668. [ 79.316091] clocksource: Switched to clocksource clk_rt
  669. [ 79.316187] fbcon: smidrmfb (fb0) is primary device
  670. [ 81.417317] Console: switching to colour frame buffer device 240x67
  671. [ 81.536909] smifb 0000:03:00.0: fb0: smidrmfb frame buffer device
  672. [ 81.586385] [drm] Initialized smifb 1.2.3 20171031 for 0000:03:00.0 on minor 0
  673. [ 81.586521] audit_printk_skb: 3 callbacks suppressed
  674. [ 81.586526] audit: type=2080 audit(1655597626.201:43): <flags=1,exe="/sbin/modprobe",ppid=909,pid=1018,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=tty1,ses=0> init_module("smifb","") = 0 (Success)
  675. [ 81.758292] audit: type=2080 audit(1655597626.371:44): <flags=1,exe="/bin/mount",ppid=909,pid=1073,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=tty1,ses=0> mount(path="/dev/devpts",path="/dev/pts","devpts",c0ed0000) = 0 (Success)
  676. [ 82.211571] udevd (1099): /proc/1099/oom_adj is deprecated, please use /proc/1099/oom_score_adj instead.
  677. [ 82.462335] l_e1000 0000:01:01.0 eth7: renamed from eth0
  678. [ 82.566699] l_e1000 0000:01:01.1 eth8: renamed from eth1
  679. [ 82.666690] l_e1000 0000:01:01.2 eth6: renamed from eth2
  680. [ 82.669355] audit: type=2080 audit(1655597627.281:45): <flags=1,exe="/lib/udev/vol_id",ppid=1525,pid=1543,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=(none),ses=0> setgroups([null]) = 0 (Success)
  681. [ 82.669400] audit: type=2080 audit(1655597627.281:46): <flags=1,exe="/lib/udev/vol_id",ppid=1525,pid=1543,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=(none),ses=0> setgid(r:99[99]) = 0 (Success)
  682. [ 82.669445] audit: type=2080 audit(1655597627.281:47): <flags=1,exe="/lib/udev/vol_id",ppid=1525,pid=1543,auid=0,uid={0,0,0,0},gid={99,99,99,99},tty=(none),ses=0> setuid(r:99[99]) = 0 (Success)
  683. [ 82.669481] audit: type=2080 audit(1655597627.281:48): <flags=1,exe="/lib/udev/vol_id",ppid=1524,pid=1535,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=(none),ses=0> setgroups([null]) = 0 (Success)
  684. [ 82.669527] audit: type=2080 audit(1655597627.281:49): <flags=1,exe="/lib/udev/vol_id",ppid=1524,pid=1535,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=(none),ses=0> setgid(r:99[99]) = 0 (Success)
  685. [ 82.669573] audit: type=2080 audit(1655597627.281:50): <flags=1,exe="/lib/udev/vol_id",ppid=1524,pid=1535,auid=0,uid={0,0,0,0},gid={99,99,99,99},tty=(none),ses=0> setuid(r:99[99]) = 0 (Success)
  686. [ 82.672864] audit: type=2080 audit(1655597627.281:51): <flags=1,exe="/lib/udev/vol_id",ppid=1523,pid=1552,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=(none),ses=0> setgroups([null]) = 0 (Success)
  687. [ 82.672904] audit: type=2080 audit(1655597627.281:52): <flags=1,exe="/lib/udev/vol_id",ppid=1523,pid=1552,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=(none),ses=0> setgid(r:99[99]) = 0 (Success)
  688. [ 82.922734] sd 0:0:0:0: Attached scsi generic sg0 type 0
  689. [ 85.221628] Adding 20000912k swap on /dev/sda3. Priority:-1 extents:1 across:20000912k SS
  690. [ 85.431030] EXT4-fs (sda2): re-mounted. Opts:
  691. [ 85.545726] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
  692. [ 85.548104] EXT4-fs (sda1): warning: maximal mount count reached, running e2fsck is recommended
  693. [ 85.551608] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
  694. [ 86.260059] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
  695. [ 86.262398] EXT4-fs (sda1): warning: maximal mount count reached, running e2fsck is recommended
  696. [ 86.264878] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
  697. [ 86.818751] audit_printk_skb: 129 callbacks suppressed
  698. [ 86.818757] audit: type=2080 audit(1655597631.431:96): <flags=1,exe="/sbin/modprobe",ppid=2037,pid=2038,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=(none),ses=0> init_module("binfmt_misc","") = 0 (Success)
  699. [ 86.822907] audit: type=2080 audit(1655597631.431:97): <flags=1,exe="/bin/mount",ppid=2037,pid=2039,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=(none),ses=0> mount(cwd="/",path="none",path="/proc/sys/fs/binfmt_misc","binfmt_misc",c0ed0000) = 0 (Success)
  700. [ 86.825778] audit: type=2080 audit(1655597631.431:98): <flags=2,exe="/bin/mount",ppid=909,pid=2035,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=tty1,ses=0> mount(cwd="/",path="none",path="/proc/sys/fs/binfmt_misc","binfmt_misc",c0ed0000) = -16 (Failure)
  701. [ 87.333807] audit: type=2080 audit(1655597631.941:99): <flags=1,exe="/bin/chmac",ppid=2065,pid=2074,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=(none),ses=0> setxattr(path="/dev/null","security.mcbc.mac.label",{0.0000000000000000}) = 0 (Success)
  702. [ 87.333881] audit: type=2080 audit(1655597631.941:100): <flags=1,exe="/bin/chmac",ppid=2065,pid=2074,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=(none),ses=0> removexattr(path="/dev/null","security.mcbc.mac.label") = 0 (Success)
  703. [ 87.333950] audit: type=2080 audit(1655597631.941:101): <flags=1,exe="/bin/chmac",ppid=2065,pid=2074,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=(none),ses=0> setxattr(path="/dev/null","security.mcbc.mac.attr",{70}) = 0 (Success)
  704. [ 87.347362] audit: type=2080 audit(1655597631.961:102): <flags=1,exe="/bin/chmac",ppid=2065,pid=2075,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=(none),ses=0> setxattr(path="/dev/ptmx","security.mcbc.mac.label",{0.0000000000000000}) = 0 (Success)
  705. [ 87.347428] audit: type=2080 audit(1655597631.961:103): <flags=1,exe="/bin/chmac",ppid=2065,pid=2075,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=(none),ses=0> removexattr(path="/dev/ptmx","security.mcbc.mac.label") = 0 (Success)
  706. [ 87.347495] audit: type=2080 audit(1655597631.961:104): <flags=1,exe="/bin/chmac",ppid=2065,pid=2075,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=(none),ses=0> setxattr(path="/dev/ptmx","security.mcbc.mac.attr",{70}) = 0 (Success)
  707. [ 87.360595] audit: type=2080 audit(1655597631.971:105): <flags=1,exe="/bin/chmac",ppid=2065,pid=2076,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=(none),ses=0> setxattr(path="/dev/tty","security.mcbc.mac.label",{0.0000000000000000}) = 0 (Success)
  708. [ 88.769626] ip_tables: (C) 2000-2006 Netfilter Core Team
  709. [ 91.621823] capability: warning: `rpc.statd' uses 32-bit capabilities (legacy support in use)
  710. [ 91.927669] random: dd: uninitialized urandom read (512 bytes read)
  711. [ 92.249043] random: dbus-daemon: uninitialized urandom read (12 bytes read)
  712. [ 92.254068] random: dbus-daemon: uninitialized urandom read (12 bytes read)
  713. [ 92.812302] NET: Registered protocol family 10
  714. [ 93.301725] urandom_read: 2 callbacks suppressed
  715. [ 93.301730] random: hald: uninitialized urandom read (10 bytes read)
  716. [ 93.301923] random: hald: uninitialized urandom read (12 bytes read)
  717. [ 93.302297] random: hald: uninitialized urandom read (10 bytes read)
  718. [ 96.401072] tulip: loading out-of-tree module taints kernel.
  719. [ 96.401911] Linux Tulip driver version 0.9.15-pre12 (Aug 9, 2002)
  720. [ 107.784905] random: crng init done
  721. [ 107.784913] random: 1 urandom warning(s) missed due to ratelimiting
  722. [ 200.248041] hub 1-0:1.0: state 7 ports 4 chg 0000 evt 0002
  723. [ 200.248134] usb usb1-port1: status 0501, change 0001, 480 Mb/s
  724. [ 200.443372] usb usb1-port1: debounce total 100ms stable 100ms status 0x501
  725. [ 200.513346] ehci-pci 0000:01:0a.1: port 1 reset complete, port enabled
  726. [ 200.583342] usb 1-1: new high-speed USB device number 3 using ehci-pci
  727. [ 200.653339] ehci-pci 0000:01:0a.1: port 1 reset complete, port enabled
  728. [ 200.779092] usb 1-1: udev 3, busnum 1, minor = 2
  729. [ 200.779101] usb 1-1: New USB device found, idVendor=8564, idProduct=1000
  730. [ 200.779109] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  731. [ 200.779115] usb 1-1: Product: Mass Storage Device
  732. [ 200.779121] usb 1-1: Manufacturer: JetFlash
  733. [ 200.779127] usb 1-1: SerialNumber: 113BGCCIUM4V3DNA
  734. [ 200.780532] usb-storage 1-1:1.0: USB Mass Storage device detected
  735. [ 200.780918] scsi host8: usb-storage 1-1:1.0
  736. [ 203.961036] scsi 8:0:0:0: Direct-Access JetFlash Transcend 64GB 1100 PQ: 0 ANSI: 6
  737. [ 203.962439] sd 8:0:0:0: Attached scsi generic sg1 type 0
  738. [ 203.963416] sd 8:0:0:0: [sdb] 122978304 512-byte logical blocks: (63.0 GB/58.6 GiB)
  739. [ 203.964892] sd 8:0:0:0: [sdb] Write Protect is off
  740. [ 203.964905] sd 8:0:0:0: [sdb] Mode Sense: 43 00 00 00
  741. [ 203.966254] sd 8:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  742. [ 203.974245] sdb: sdb1
  743. [ 203.979234] sd 8:0:0:0: [sdb] Attached SCSI removable disk
  744.  
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!