Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Favorite[0].freq = 561000000
- Attempting Downstream FEC lock @ freq= 561000000 Hz, QAM64/256
- 0x0003fc00 ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::SyncDsLockOk: (CmDocsisCtlThread) Locked on the downstream. Waiting for UCDs...
- ******************************************
- DOWNSTREAM STATUS
- ******************************************
- Tuner Frequency = 561000000 Hz
- Carrier Offset = 10 Hz
- Symbol rate = 5360537 sym/sec
- SNR = 32 dB
- QAM Mode = QAM256
- Tuner AGC = 0xfff00000
- IF AGC = 0x8a8cf600
- Power Level = -17 dB
- QAM = LOCKED
- FEC = LOCKED
- ******************************************
- Received a UCD for Upstream Channel 2!
- CM>
- Received a UCD for Upstream Channel 3!
- Received a UCD for Upstream Channel 4!
- Received a UCD for Upstream Channel 1!
- Received a UCD for Upstream Channel 2!
- Selecting UCD for Us Channel 2
- BcmCmUsPhyOverheadSettings::ComputeReqDataPhyToMacTable() burst descriptor not found for kReqDataIUC.
- Upstream Frequency = 30000000
- Found QAM16 = true
- 0x000402e0 ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::TestAndLaunchDsTimeSync: (CmDocsisCtlThread) entering...
- new_us_scdma_enabled = false
- fLastDsClockModeIsScdma = false
- fCmDsTargetingState = kDsPhyOkUsUcdPending
- IsDccContext() = false
- 0x000402e0 ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::TestAndLaunchDsTimeSync: (CmDocsisCtlThread) starting ds time sync acquisition...
- 0x00040560 ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::SyncDsSyncOk: (CmDocsisCtlThread) downstream time sync acquired...
- 0x00040560 ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::DsSyncOkResumeUsInit: (CmDocsisCtlThread) pre-REG upstream target case...starting initial ranging.
- Beginning initial ranging...
- Using stored initial upstream power = 40.0 dBmV
- 0x00040560 ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::SyncDsSyncOk: (CmDocsisCtlThread) rx unexpected kDsSyncOk indication...
- Not logging event ID 2223898630, control for level 7 is 0.
- RNG-RSP Adj: tim=2803 power=0 freq=0 Stat=Continue
- 0x000407f4 ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::RngRspMsgEvent: (CmDocsisCtlThread) WARNING - Calling PreRegUsChanChange! Appendix H stuff...
- Deleting DOCSIS 1.0 CoS Settings for SID 0x0
- 0x000408bc ['CmDocsisCtlThread' id=0x807bda80] BcmDocsisCmHalIf::DeleteAllServiceFlows: (DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along with associated Classifiers and PHS rules...
- Stopping DHCP/ToD/TFTP (client requested)...
- BcmSnmpAgent::RestartPendingEvent for SB5100 CM Agent
- SB5100 CM Agent setting V1/V2 view to
- SB5100 CM Agent sending deferred traps...
- Done w/ deferred traps.
- SB5100 CM Agent ConfigIp: Ip=0.0.0.0, Subnet=0.0.0.0, Gateway=0.0.0.0
- Ip addr is the same, not rebinding.
- SB5100 CM Agent destroying users...
- SB5100 CM Agent destroying notifies...
- SB5100 CPE Agent setting V1/V2 view to docsisCpeView
- Non-Vol Settings successfully written to the device.
- 0x000408bc ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::ResetRngState: (CmDocsisCtlThread)
- 0x000408bc ['CmPropaneCtlThread' id=0x807b9800] BcmCmPropaneCtlThread::ServiceMessageQueue: (CmPropaneCtlThread) WARNING - Didn't handle command IpAddressLost in the current state (2, PropaneCmInitial)!
- SB5100 CM Event Log sending deferred async messages...
- Done w/ deferred msgs
- NonVolDeviceDriver::NonVolDriverWrite: WARNING - Current segment size < buffer size! Increasing the segment size!
- NonVolDeviceDriver::NonVolDriverWrite: WARNING - Erasing flash region; a power failure here will cause settings to be lost!
- Received a UCD for Upstream Channel 2!
- Received a UCD for Upstream Channel 3!
- CM>
- Received a UCD for Upstream Channel 4!
- Received a UCD for Upstream Channel 1!
- Received a UCD for Upstream Channel 2!
- Selecting UCD for Us Channel 1
- BcmCmUsPhyOverheadSettings::ComputeReqDataPhyToMacTable() burst descriptor not found for kReqDataIUC.
- Upstream Frequency = 30000000
- Found QAM16 = true
- 0x00040f60 ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::TestAndLaunchDsTimeSync: (CmDocsisCtlThread) entering...
- new_us_scdma_enabled = false
- fLastDsClockModeIsScdma = false
- fCmDsTargetingState = kDsOkUsPending
- IsDccContext() = false
- 0x00040f60 ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::TestAndLaunchDsTimeSync: (CmDocsisCtlThread) ds time sync should be ok. resume us init now.
- 0x00040f60 ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::DsSyncOkResumeUsInit: (CmDocsisCtlThread) pre-REG upstream target case...starting initial ranging.
- Beginning initial ranging...
- Using stored initial upstream power = 40.0 dBmV
- Not logging event ID 2223898630, control for level 7 is 0.
- RNG-RSP Adj: tim=2803 power=0 freq=0 Stat=Continue
- 0x00041794 ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::ConfigStationMaint: (CmDocsisCtlThread)
- config is kStationMaintenance mode.
- RNG-RSP Adj: tim=0 power=0 freq=0 Stat=Success
- 0x000417f8 ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::ConfigStationMaint: (CmDocsisCtlThread)
- config is kPeriodicRanging mode.
- ******************************************
- UPSTREAM STATUS
- ******************************************
- Upstream Status = UP
- Upstream Channel = 1
- Upstream Frequency = 30000000 Hz
- Upstream Power = 40 dBmV
- Ranging SID = 0x5f0
- Upstream Symbol Rate = 2560000 sym/sec
- ******************************************
- Starting IP Initialization with DHCP...
- DHCPc: Waiting 3 seconds before sending Discover; client id htype=1, value=00:0c:e5:2c:fb:64
- Not logging event ID 2223898629, control for level 7 is 0.
- CM> DHCPc: Sending Discover packet; client id htype=1, value=00:0c:e5:2c:fb:64
- DHCPc: Received an Offer from DHCP server 00:30:b8:c5:0d:b0 (73.28.240.1); lease client id htype=1, value=00:0c:e5:2c:fb:64
- CM> DHCPc: Timed out waiting for offers for lease with client id htype=1, value=00:0c:e5:2c:fb:64
- DHCPc: Sending Request packet; client id htype=1, value=00:0c:e5:2c:fb:64
- DHCPc: Received an Ack from DHCP server 00:30:b8:c5:0d:b0 (73.28.240.1); lease client id htype=1, value=00:0c:e5:2c:fb:64
- Current IP address is default 169.0.0.1; removing existing route...
- 0x00042ba8 ['DHCP Client Thread' id=0x807c8fa0] BcmVxIpHalIf::ConfigureLeaseImpl: (IP Stack1 HalIf)
- Configuring IP stack 1:
- IP Address = 73.28.247.200
- Subnet Mask = 255.255.248.0
- Router = 73.28.240.1
- DHCP completed successfully!
- DHCP Settings:
- Client Id = htype=1, value=00:0c:e5:2c:fb:64
- State = Bound (4)
- Static Lease = false
- AutoConfig Mode = IP, Subnet and Router
- XID = 0x6213
- Number of Tries = 0
- Max Discover Tries = 6
- Max Request Tries = 6
- DHCP server MAC addr = 00:30:b8:c5:0d:b0
- My offered IP address = 73.28.247.200
- (1) Subnet Mask = 255.255.248.0
- (3) Router IP address = 73.28.240.1
- (54) DHCP Server IP address = 68.87.68.10
- (82) Relay Agent IP address = 73.28.240.1
- TFTP Server IP address = 68.87.68.11
- CM Configuration file = 'd11_walledgarden.cm'
- (2) UTC Time Offset = -21600 seconds
- (4) Time Server IP address = 68.87.68.11
- (7) Log Server IP address = 0.0.0.0
- (51) Lease time = 5496 seconds
- (58) T1 (renew) = 2748 seconds
- (59) T2 (rebind) = 4809 seconds
- Lease is infinite = false
- CmSnmpAgent::IpAddressAcquiredEvent for SB5100 CM Agent
- IP addr = 73.28.247.200
- SB5100 CM Agent ConfigIp: Ip=73.28.247.200, Subnet=255.255.248.0, Gateway=73.28.240.1
- CM> Starting Time Of Day...
- 0x00042f9a ['CmDocsisIpThread' id=0x807c3b50] BcmDocsisTimeOfDayThread::SetTodServerIpAddress: (Time Of Day Thread) ToD servers: 68.87.68.11
- Connecting to ToD server 68.87.68.11...
- Sending UDP ToD request to server...
- Not logging event ID 2223898627, control for level 7 is 0.
- CM> UTC returned by ToD server 3418320076; UTC offset -21600
- Current system time -> SUN APR 27 15:21:16 2008
- System start time -> SUN APR 27 15:16:44 2008
- Starting Tftp of configuration file...
- Opening file 'd11_walledgarden.cm' on 68.87.68.11...
- Forcing to download Cfg file: d11_m_sb5100_speedtierextreme2_c05.cm
- tftpInit: Tftp outbound interface flag (1024)
- Connected to 68.87.68.11 [69]
- mode set to octet.
- getting from 68.87.68.11:d11_m_sb5100_speedtierextreme2_c05.cm [octet]
- tftpSend: Attempt #(1) Backoff (2) tickCount (27467) blkReply (1)
- ng management.
- SB5100 CPE Agent defering traps.
- MAX CPE per CM is being set to 6
- Sending a REG-REQ to the CMTS...
- Time Of Day completed...
- BcmSnmpAgent::SystemTimeChangeEvent for SB5100 CM Agent
- Tftp read ZERO bytes, may have reached end of file.
- Config file was read! IP Initialization completed...
- Set 1.3.6.1.2.1.69.1.3.3.0 to 2 OK.
- Set 1.3.6.1.2.1.69.1.2.1.2.1 to 68.87.64.0 OK.
- Set 1.3.6.1.2.1.69.1.2.1.3.1 to 255.255.192.0 OK.
- Set 1.3.6.1.2.1.69.1.2.1.4.1 to hDaFHJG7 OK.
- Set 1.3.6.1.2.1.69.1.2.1.5.1 to 3 OK.
- Set 1.3.6.1.2.1.69.1.2.1.6.1 to 40 00 OK.
- Set 1.3.6.1.2.1.69.1.2.1.7.1 to 4 OK.
- Set 1.3.6.1.2.1.69.1.2.1.2.2 to 76.96.0.0 OK.
- Set 1.3.6.1.2.1.69.1.2.1.3.2 to 255.255.128.0 OK.
- Set 1.3.6.1.2.1.69.1.2.1.4.2 to hDaFHJG7 OK.
- Set 1.3.6.1.2.1.69.1.2.1.5.2 to 3 OK.
- Set 1.3.6.1.2.1.69.1.2.1.6.2 to 40 00 OK.
- Set 1.3.6.1.2.1.69.1.2.1.7.2 to 4 OK.
- Set 1.3.6.1.2.1.69.1.2.1.2.6 to 24.128.113.128 OK.
- Set 1.3.6.1.2.1.69.1.2.1.3.6 to 255.255.255.240 OK.
- Set 1.3.6.1.2.1.69.1.2.1.4.6 to 1Mcl0c41$ OK.
- Set 1.3.6.1.2.1.69.1.2.1.5.6 to 2 OK.
- Set 1.3.6.1.2.1.69.1.2.1.6.6 to 40 00 OK.
- Set 1.3.6.1.2.1.69.1.2.1.7.6 to 4 OK.
- Set 1.3.6.1.2.1.69.1.2.1.2.7 to 24.34.240.0 OK.
- Set 1.3.6.1.2.1.69.1.2.1.3.7 to 255.255.240.0 OK.
- Set 1.3.6.1.2.1.69.1.2.1.4.7 to 1e6ukpf4 OK.
- Set 1.3.6.1.2.1.69.1.2.1.5.7 to 3 OK.
- Set 1.3.6.1.2.1.69.1.2.1.6.7 to 40 00 OK.
- Set 1.3.6.1.2.1.69.1.2.1.7.7 to 4 OK.
- Set 1.3.6.1.2.1.69.1.2.1.2.8 to 24.34.224.0 OK.
- Set 1.3.6.1.2.1.69.1.2.1.3.8 to 255.255.240.0 OK.
- Set 1.3.6.1.2.1.69.1.2.1.4.8 to xygi7vnz OK.
- Set 1.3.6.1.2.1.69.1.2.1.5.8 to 2 OK.
- Set 1.3.6.1.2.1.69.1.2.1.6.8 to 40 00 OK.
- Set 1.3.6.1.2.1.69.1.2.1.7.8 to 4 OK.
- Set 1.3.6.1.2.1.69.1.6.4.1.2.10 to 4 OK.
- Set 1.3.6.1.2.1.69.1.6.4.1.5.10 to 3 OK.
- Set 1.3.6.1.2.1.69.1.6.4.1.11.10 to 17 OK.
- Set 1.3.6.1.2.1.69.1.6.4.1.14.10 to 135 OK.
- Set 1.3.6.1.2.1.69.1.6.4.1.15.10 to 139 OK.
- Set 1.3.6.1.2.1.69.1.6.4.1.2.11 to 4 OK.
- Set 1.3.6.1.2.1.69.1.6.4.1.5.11 to 3 OK.
- Set 1.3.6.1.2.1.69.1.6.4.1.11.11 to 6 OK.
- Set 1.3.6.1.2.1.69.1.6.4.1.14.11 to 135 OK.
- Set 1.3.6.1.2.1.69.1.6.4.1.15.11 to 139 OK.
- Set 1.3.6.1.2.1.69.1.6.4.1.2.20 to 4 OK.
- Set 1.3.6.1.2.1.69.1.6.4.1.11.20 to 17 OK.
- Set 1.3.6.1.2.1.69.1.6.4.1.14.20 to 68 OK.
- Set 1.3.6.1.2.1.69.1.6.4.1.15.20 to 68 OK.
- Set 1.3.6.1.2.1.69.1.6.4.1.2.30 to 4 OK.
- Set 1.3.6.1.2.1.69.1.6.4.1.5.30 to 3 OK.
- Set 1.3.6.1.2.1.69.1.6.4.1.11.30 to 17 OK.
- Set 1.3.6.1.2.1.69.1.6.4.1.14.30 to 520 OK.
- Set 1.3.6.1.2.1.69.1.6.4.1.15.30 to 520 OK.
- Set 1.3.6.1.2.1.69.1.6.4.1.2.40 to 4 OK.
- Set 1.3.6.1.2.1.69.1.6.4.1.5.40 to 2 OK.
- Set 1.3.6.1.2.1.69.1.6.4.1.11.40 to 6 OK.
- Set 1.3.6.1.2.1.69.1.6.4.1.14.40 to 1080 OK.
- Set 1.3.6.1.2.1.69.1.6.4.1.15.40 to 1080 OK.
- Set 1.3.6.1.2.1.69.1.6.4.1.2.60 to 4 OK.
- Set 1.3.6.1.2.1.69.1.6.4.1.5.60 to 3 OK.
- Set 1.3.6.1.2.1.69.1.6.4.1.11.60 to 6 OK.
- Set 1.3.6.1.2.1.69.1.6.4.1.14.60 to 445 OK.
- Set 1.3.6.1.2.1.69.1.6.4.1.15.60 to 445 OK.
- 60 TLV-11's OK.
- SB5100 CPE Agent disabliReceived a REG-RSP message from the CMTS...
- 0x00043378 ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::RegRspMsgEvent: (CmDocsisCtlThread) We registered with a DOCSIS 1.1 config file!
- Not logging event ID 2223898626, control for level 7 is 0.
- Registration complete!
- Process CVC
- Co-signer CVC verified
- CVC's validated
- DOCSIS CoS/QoS rate shaping enable is now true
- CmSnmpAgent::CmOperationalEvent for SB5100 CM Agent
- CmSnmpAgent operating in 1.1 mode, including docsQos, excluding docsBpi
- +++ No DH kickstart profiles or snmpCommunityTable entries installed.
- We will operate in NMACCESS mode.
- SB5100 CM Agent setting V1/V2 view to docsisNmAccessView
- SB5100 CM Agent enabling management.
- SB5100 CM Agent sending deferred traps...
- Done w/ deferred traps.
- SB5100 CPE Agent enabling management.
- SB5100 CPE Agent sending deferred traps...
- Done w/ deferred traps.
- SB5100 CPE Agent setting V1/V2 view to docsisNmAccessView
- 0x000433c8 ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::TestAndLaunchBpkm: (CmDocsisCtlThread) BPKM disabled via manufacturing setting.
- Enabling network access for all CPE ports.
- mot_scanList: Writing to Flash!
- BcmCmDocsisStatusEventCodes::kCmIsOperational
- 0x00043436 ['IGMP Thread' id=0x807b7580] BcmIgmpThread::Starting Igmp Thread...: (IGMP Thread)
- Stopping DHCP server...
- Leaving standby mode!
- Stopping DHCP server...
- Not logging event ID 2223898625, control for level 7 is 0.
- SB5100 CM Event Log sending deferred async messages...
- Done w/ deferred msgs
- Not logging event ID 2223898628, control for level 7 is 0.
- Not logging event ID 2223898633, control for level 7 is 0.
- CM>
Add Comment
Please, Sign In to add comment