Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- • If logged into windows, shutdown the computer.
- • Restart the computer and wait for text to appear.
- • Immediately press the F2 key a few times for the BIOS menu to appear.
- • Use the ARROW and Enter keys to navigate and select options and the ESC key to move back. Use the Y or N key if indicated.
- • Select CONFIGURATION, use the DOWN arrow to select ONBOARD DEVICES, press ENTER.
- • DISABLE serial port 1_____
- • DISABLE serial port 2_____
- • DISABLE the Parallel Port _____
- • Use ESC key to exit. Select the EXIT menu; select Exit Saving Changes then ENTER, then Y.
- • The computer should after short delay.
- From the desktop
- • USB cables are connected to the flowmeter_____ MGA module_____ MCA module _____
- • Right click on the COMPUTER icon, then click PROPERTIES.
- • Click Device Manager, double click PORTS to expand the submenu.
- • With x representing a single digit number, two Kit Prog USB-UART’s (COM x), and one Prolific USB to Serial Comm PORT (COM x) ports are displayed_____.
- • Double click Prolific USB to Serial Comm PORT (COM x).
- • Select the Port Setting tab (second tab).
- • select bits per second at 38400, 8, none, 1, none_____
- • Click ADVANCED, Click Com port number, select COM3, and click OK_____
- • Remove the USB cable from back panel of the MCA _____
- • Double click Kit Prog USB-UART (COM x), assigned to the MGA_____
- • Click on Port Settings.
- • Select bits per second at 38400, 8, none, 1, none.
- • Click the ADVANCED button. Click Com port number, select COM5, click (twice) OK_____
- • Remove USB cable from back panel of the MGA_____
- • Plug the USB cable in the back panel of the MCA_____
- • Double click Kit Prog USB-UART (COM x), assigned to the MCA_____
- • Select bits per second at 38400, 8, none, 1, none.
- • Click the ADVANCED button. Click Com port number, select COM6, click (twice) OK_____
- • Plug the USB cable into the back panel of the MGA module.
- • Make sure that COM3, COM5 and COM6 are listed on Device Manager, Ports.
- • Close the open windows.
- • Restart the computer and wait for the computer to reboot windows.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement