API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Apr 19th, 2019
334
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 28.48 KB | None | 0 0
raw download clone embed print report
  1. root@OpenWrt:~# dmesg
  2. [ 0.000000] Linux version 4.14.111 (zel@Laptop) (gcc version 7.4.0 (OpenWrt GCC 7.4.0 r0-bd3a18b)) #0 Wed Apr 17 12:55:32 2019
  3. [ 0.000000] Board has DDR2
  4. [ 0.000000] Analog PMU set to hw control
  5. [ 0.000000] Digital PMU set to hw control
  6. [ 0.000000] SoC Type: MediaTek MT7628AN ver:1 eco:2
  7. [ 0.000000] bootconsole [early0] enabled
  8. [ 0.000000] CPU0 revision is: 00019655 (MIPS 24KEc)
  9. [ 0.000000] MIPS: machine is TP-Link TL-WR840N v4
  10. [ 0.000000] Determined physical RAM map:
  11. [ 0.000000] memory: 04000000 @ 00000000 (usable)
  12. [ 0.000000] Initrd not found or empty - disabling initrd
  13. [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
  14. [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
  15. [ 0.000000] Zone ranges:
  16. [ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff]
  17. [ 0.000000] Movable zone start for each node
  18. [ 0.000000] Early memory node ranges
  19. [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff]
  20. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
  21. [ 0.000000] On node 0 totalpages: 16384
  22. [ 0.000000] free_area_init_node: node 0, pgdat 80499150, node_mem_map 81000040
  23. [ 0.000000] Normal zone: 128 pages used for memmap
  24. [ 0.000000] Normal zone: 0 pages reserved
  25. [ 0.000000] Normal zone: 16384 pages, LIFO batch:3
  26. [ 0.000000] random: get_random_bytes called from start_kernel+0x8c/0x474 with crng_init=0
  27. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  28. [ 0.000000] pcpu-alloc: [0] 0
  29. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16256
  30. [ 0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2
  31. [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
  32. [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
  33. [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
  34. [ 0.000000] Writing ErrCtl register=00000000
  35. [ 0.000000] Readback ErrCtl register=00000000
  36. [ 0.000000] Memory: 59724K/65536K available (3677K kernel code, 175K rwdata, 860K rodata, 208K init, 200K bss, 5812K reserved, 0K cma-reserved)
  37. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  38. [ 0.000000] NR_IRQS: 256
  39. [ 0.000000] intc: using register map from devicetree
  40. [ 0.000000] CPU Clock: 580MHz
  41. [ 0.000000] timer_probe: no matching timers found
  42. [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6590553264 ns
  43. [ 0.000011] sched_clock: 32 bits at 290MHz, resolution 3ns, wraps every 7405115902ns
  44. [ 0.007536] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
  45. [ 0.073499] pid_max: default: 32768 minimum: 301
  46. [ 0.078182] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  47. [ 0.084532] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  48. [ 0.097092] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  49. [ 0.106582] futex hash table entries: 256 (order: -1, 3072 bytes)
  50. [ 0.112533] pinctrl core: initialized pinctrl subsystem
  51. [ 0.118607] NET: Registered protocol family 16
  52. [ 0.147365] mt7621_gpio 10000600.gpio: registering 32 gpios
  53. [ 0.153034] mt7621_gpio 10000600.gpio: registering 32 gpios
  54. [ 0.158543] mt7621_gpio 10000600.gpio: registering 32 gpios
  55. [ 0.168499] clocksource: Switched to clocksource MIPS
  56. [ 0.174555] NET: Registered protocol family 2
  57. [ 0.179605] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
  58. [ 0.186294] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  59. [ 0.192483] TCP: Hash tables configured (established 1024 bind 1024)
  60. [ 0.198743] UDP hash table entries: 256 (order: 0, 4096 bytes)
  61. [ 0.204341] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  62. [ 0.210683] NET: Registered protocol family 1
  63. [ 0.214855] PCI: CLS 0 bytes, default 32
  64. [ 0.218183] Crashlog allocated RAM at address 0x3f00000
  65. [ 0.224798] workingset: timestamp_bits=30 max_order=14 bucket_order=0
  66. [ 0.236720] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  67. [ 0.242344] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  68. [ 0.261749] io scheduler noop registered
  69. [ 0.265481] io scheduler deadline registered (default)
  70. [ 0.271292] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
  71. [ 0.278647] console [ttyS0] disabled
  72. [ 0.282082] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 28, base_baud = 2500000) is a 16550A
  73. [ 0.290830] console [ttyS0] enabled
  74. [ 0.297815] bootconsole [early0] disabled
  75. [ 0.306423] cacheinfo: Failed to find cpu0 device node
  76. [ 0.311676] cacheinfo: Unable to detect cache hierarchy for CPU 0
  77. [ 0.318629] spi-mt7621 10000b00.spi: sys_freq: 193333333
  78. [ 0.337266] m25p80 spi0.0: s25fl064k (8192 Kbytes)
  79. [ 0.342218] 4 fixed-partitions partitions found on MTD device spi0.0
  80. [ 0.348676] Creating 4 MTD partitions on "spi0.0":
  81. [ 0.353548] 0x000000000000-0x000000020000 : "boot"
  82. [ 0.359369] 0x000000020000-0x0000007c0000 : "firmware"
  83. [ 0.367363] 2 tplink-fw partitions found on MTD device firmware
  84. [ 0.373440] Creating 2 MTD partitions on "firmware":
  85. [ 0.378501] 0x000000000000-0x000000181eb5 : "kernel"
  86. [ 0.384470] 0x000000181eb8-0x0000007a0000 : "rootfs"
  87. [ 0.390365] mtd: device 3 (rootfs) set to be root filesystem
  88. [ 0.397584] 1 squashfs-split partitions found on MTD device rootfs
  89. [ 0.403940] 0x000000380000-0x0000007a0000 : "rootfs_data"
  90. [ 0.410369] 0x0000007c0000-0x0000007d0000 : "config"
  91. [ 0.416250] 0x0000007d0000-0x000000800000 : "factory"
  92. [ 0.423014] libphy: Fixed MDIO Bus: probed
  93. [ 0.439585] rt3050-esw 10110000.esw: link changed 0x00
  94. [ 0.446422] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5
  95. [ 0.456627] NET: Registered protocol family 10
  96. [ 0.465030] Segment Routing with IPv6
  97. [ 0.468934] NET: Registered protocol family 17
  98. [ 0.473491] 8021q: 802.1Q VLAN Support v1.8
  99. [ 0.488336] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
  100. [ 0.496686] Freeing unused kernel memory: 208K
  101. [ 0.501226] This architecture does not have kernel memory protection.
  102. [ 1.456634] init: Console is alive
  103. [ 1.460423] init: - watchdog -
  104. [ 1.623492] kmodloader: failed to mmap /lib/modules/4.14.111/mt7628.ko
  105. [ 1.790108] init: - preinit -
  106. [ 2.348510] random: fast init done
  107. [ 3.170393] rt3050-esw 10110000.esw: link changed 0x00
  108. [ 6.235611] rt3050-esw 10110000.esw: link changed 0x01
  109. [ 6.476003] mount_root: jffs2 not ready yet, using temporary tmpfs overlay
  110. [ 6.506950] urandom-seed: Seed file not found (/etc/urandom.seed)
  111. [ 6.645385] procd: - early -
  112. [ 6.648421] procd: - watchdog -
  113. [ 6.690906] rt3050-esw 10110000.esw: link changed 0x03
  114. [ 7.294553] procd: - watchdog -
  115. [ 7.298048] procd: - ubus -
  116. [ 7.477036] random: ubusd: uninitialized urandom read (4 bytes read)
  117. [ 7.564709] random: ubusd: uninitialized urandom read (4 bytes read)
  118. [ 7.571789] random: ubusd: uninitialized urandom read (4 bytes read)
  119. [ 7.579329] procd: - init -
  120. [ 7.909493] kmodloader: failed to mmap /lib/modules/4.14.111/mt7628.ko
  121. [ 8.624090] rt3050-esw 10110000.esw: link changed 0x07
  122. [ 9.369997] urandom_read: 5 callbacks suppressed
  123. [ 9.370006] random: jshn: uninitialized urandom read (4 bytes read)
  124. [ 9.533686] random: jshn: uninitialized urandom read (4 bytes read)
  125. [ 20.885562] rt3050-esw 10110000.esw: link changed 0x00
  126. [ 23.651002] br-lan: port 1(eth0.1) entered blocking state
  127. [ 23.656493] br-lan: port 1(eth0.1) entered disabled state
  128. [ 23.662420] device eth0.1 entered promiscuous mode
  129. [ 23.667287] device eth0 entered promiscuous mode
  130. [ 23.798423] br-lan: port 1(eth0.1) entered blocking state
  131. [ 23.803955] br-lan: port 1(eth0.1) entered forwarding state
  132. [ 23.809841] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
  133. [ 23.942827] rt3050-esw 10110000.esw: link changed 0x01
  134. [ 24.354093] rt3050-esw 10110000.esw: link changed 0x03
  135. [ 24.706396] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
  136. [ 26.352811] rt3050-esw 10110000.esw: link changed 0x07
  137. [ 40.876798] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
  138. [ 40.889364] jffs2_build_filesystem(): unlocking the mtd device...
  139. [ 40.889426] done.
  140. [ 40.897643] jffs2_build_filesystem(): erasing all blocks after the end marker...
  141. [ 56.590148] done.
  142. [ 56.599752] jffs2: notice: (1186) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
  143. [ 56.833655] overlayfs: upper fs does not support tmpfile.
  144. [ 81.265051] rt3050-esw 10110000.esw: link changed 0x05
  145. [ 85.253416] rt3050-esw 10110000.esw: link changed 0x07
  146. [ 106.448884] random: crng init done
  147. [ 263.991936] mt7628: module license 'unspecified' taints kernel.
  148. [ 263.997955] Disabling lock debugging due to kernel taint
  149. [ 264.055202]
  150. [ 264.055202]
  151. [ 264.055202] === pAd = c0354000, size = 1289408 ===
  152. [ 264.055202]
  153. [ 264.064749] <-- RTMPAllocTxRxRingMemory, Status=0, ErrorValue=0x
  154. [ 264.072532] <-- RTMPAllocAdapterBlock, Status=0
  155. [ 264.077132] RtmpChipOpsHook(492): Not support for HIF_MT yet!
  156. [ 264.082988] mt7628_init()-->
  157. [ 264.085914] mt7628_init(FW(8a00), HW(8a01), CHIPID(7628))
  158. [ 264.091400] e2.bin mt7628_init(1135)::(2), pChipCap->fw_len(63888)
  159. [ 264.097666] mt_bcn_buf_init(218): Not support for HIF_MT yet!
  160. [ 264.103511] <--mt7628_init()
  161. [ 279.491530] TX_BCN DESC a292f000 size = 320
  162. [ 279.495820] RX[0] DESC a2932000 size = 1024
  163. [ 279.500326] RX[1] DESC a2933000 size = 1024
  164. [ 279.513508] cfg_mode=9
  165. [ 279.515914] cfg_mode=9
  166. [ 279.518310] wmode_band_equal(): Band Equal!
  167. [ 279.523093] AndesSendCmdMsg: Could not send in band command due to diable fRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD
  168. [ 279.534876] APSDCapable[0]=1
  169. [ 279.537796] APSDCapable[1]=1
  170. [ 279.540730] APSDCapable[2]=1
  171. [ 279.543647] APSDCapable[3]=1
  172. [ 279.546564] APSDCapable[4]=1
  173. [ 279.549495] APSDCapable[5]=1
  174. [ 279.552504] APSDCapable[6]=1
  175. [ 279.555421] APSDCapable[7]=1
  176. [ 279.558338] APSDCapable[8]=1
  177. [ 279.561289] APSDCapable[9]=1
  178. [ 279.564205] APSDCapable[10]=1
  179. [ 279.567210] APSDCapable[11]=1
  180. [ 279.570229] APSDCapable[12]=1
  181. [ 279.573234] APSDCapable[13]=1
  182. [ 279.576239] APSDCapable[14]=1
  183. [ 279.579257] APSDCapable[15]=1
  184. [ 279.582263] default ApCliAPSDCapable[0]=1
  185. [ 279.588795] Key1Str is Invalid key length(0) or Type(1)
  186. [ 279.594305] Key2Str is Invalid key length(0) or Type(1)
  187. [ 279.599840] Key3Str is Invalid key length(0) or Type(1)
  188. [ 279.605358] Key4Str is Invalid key length(0) or Type(1)
  189. [ 279.641815] RtmpOSFileOpen(): Error 2 opening /etc/Wireless/RT2860AP/SingleSKU.dat
  190. [ 279.649593] load fw image from fw_header_image
  191. [ 279.654096] AndesMTLoadFwMethod1(2182)::pChipCap->fw_len(63888)
  192. [ 279.660108] FW Version:
  193. [ 279.660114] 2
  194. [ 279.662589] 0
  195. [ 279.664182] 1
  196. [ 279.665775] 5
  197. [ 279.667369] 1
  198. [ 279.668973] 2
  199. [ 279.670567] 0
  200. [ 279.672161] 1
  201. [ 279.673755]
  202. [ 279.675348]
  203. [ 279.676942]
  204. [ 279.680050] FW Build Date:
  205. [ 279.680054] 2
  206. [ 279.682792] 0
  207. [ 279.684384] 1
  208. [ 279.685978] 5
  209. [ 279.687571] 1
  210. [ 279.689178] 2
  211. [ 279.690770] 0
  212. [ 279.692364] 1
  213. [ 279.693957] 1
  214. [ 279.695549] 8
  215. [ 279.697142] 3
  216. [ 279.698748] 6
  217. [ 279.700342] 4
  218. [ 279.701934] 1
  219. [ 279.703527]
  220. [ 279.705121]
  221. [ 279.710642] CmdAddressLenReq:(ret = 0)
  222. [ 279.715267] CmdFwStartReq: override = 1, address = 1048576
  223. [ 279.721045] CmdStartDLRsp: WiFI FW Download Success
  224. [ 279.726199] MtAsicDMASchedulerInit(): DMA Scheduler Mode=0(LMAC)
  225. [ 279.732366] efuse_probe: efuse = 10000012
  226. [ 279.736431] RtmpChipOpsEepromHook::e2p_type=0, inf_Type=4
  227. [ 279.741911] RtmpEepromGetDefault::e2p_dafault=2
  228. [ 279.746505] RtmpChipOpsEepromHook: E2P type(2), E2pAccessMode = 2, E2P default = 2
  229. [ 279.754185] NVM is FLASH mode
  230. [ 279.757250] 1. Phy Mode = 14
  231. [ 279.760179] flash_bin_read : a=262144 b=1024
  232. [ 279.764751] net ra0: Direct firmware load for mt7628.eeprom.bin failed with error -2
  233. [ 279.772645] net ra0: Falling back to user helper
  234. [ 279.827871] firmware mt7628.eeprom.bin: firmware_loading_store: map pages failed
  235. [ 279.835748] os_load_code_from_bin:fw not available(/lib/firmware/mt7628.eeprom.bin)
  236. [ 279.843639] RtmpOSFileOpen(): Error 2 opening /etc_ro/wlan/MT7628_EEPROM_20140317.bin
  237. [ 279.851753] The EEPROM in Flash is wrong, use default
  238. [ 279.856874] proprietary driver not support flash write, will write on ated.
  239. [ 280.028013] Country Region from e2p = ffff
  240. [ 280.032278] tssi_1_target_pwr_g_band = 39
  241. [ 280.036350] 2. Phy Mode = 14
  242. [ 280.039863] 3. Phy Mode = 14
  243. [ 280.042786] NICInitPwrPinCfg(11): Not support for HIF_MT yet!
  244. [ 280.048630] NICInitializeAsic(651): Not support rtmp_mac_sys_reset () for HIF_MT yet!
  245. [ 280.056564] mt_mac_init()-->
  246. [ 280.059492] MtAsicInitMac()-->
  247. [ 280.062982] mt7628_init_mac_cr()-->
  248. [ 280.066535] MtAsicSetMacMaxLen(1276): Set the Max RxPktLen=1024!
  249. [ 280.072666] <--mt_mac_init()
  250. [ 280.075743] WTBL Segment 1 info:
  251. [ 280.079119] MemBaseAddr/FID:0x28000/0
  252. [ 280.083005] EntrySize/Cnt:32/128
  253. [ 280.086449] WTBL Segment 2 info:
  254. [ 280.089820] MemBaseAddr/FID:0x40000/0
  255. [ 280.093706] EntrySize/Cnt:64/128
  256. [ 280.097149] WTBL Segment 3 info:
  257. [ 280.100526] MemBaseAddr/FID:0x42000/64
  258. [ 280.104502] EntrySize/Cnt:64/128
  259. [ 280.107945] WTBL Segment 4 info:
  260. [ 280.111316] MemBaseAddr/FID:0x44000/128
  261. [ 280.115379] EntrySize/Cnt:32/128
  262. [ 280.118917] AntCfgInit(2958): Not support for HIF_MT yet!
  263. [ 280.124534] MCS Set = ff ff 00 00 01
  264. [ 280.128160] MtAsicSetChBusyStat(861): Not support for HIF_MT yet!
  265. [ 280.143505] SYNC - BBP R4 to 20MHz.l
  266. [ 280.608689] CmdSlotTimeSet:(ret = 0)
  267. [ 280.745332] SYNC - BBP R4 to 20MHz.l
  268. [ 281.355329] SYNC - BBP R4 to 20MHz.l
  269. [ 281.966431] SYNC - BBP R4 to 20MHz.l
  270. [ 282.576424] SYNC - BBP R4 to 20MHz.l
  271. [ 283.186437] SYNC - BBP R4 to 20MHz.l
  272. [ 283.796437] SYNC - BBP R4 to 20MHz.l
  273. [ 284.406421] SYNC - BBP R4 to 20MHz.l
  274. [ 285.016628] SYNC - BBP R4 to 20MHz.l
  275. [ 285.618550] [PMF]ap_pmf_init:: apidx=0, MFPC=0, MFPR=0, SHA256=0
  276. [ 285.624719] MtAsicSetRalinkBurstMode(3048): Not support for HIF_MT yet!
  277. [ 285.631458] MtAsicSetPiggyBack(796): Not support for HIF_MT yet!
  278. [ 285.661346] reload DPD from flash , 0x9F = [c6ff] doReload bit7[1]
  279. [ 285.667630] CmdLoadDPDDataFromFlash: Channel = 6, DoReload = 1
  280. [ 285.673821] MtAsicSetTxPreamble(3027): Not support for HIF_MT yet!
  281. [ 285.680362] MtAsicSetPreTbtt(): bss_idx=0, PreTBTT timeout = 0xf0
  282. [ 285.686547] ap_ftkd> Initialize FT KDP Module...
  283. [ 285.691287] Main bssid = 00:00:00:00:00:a8
  284. [ 285.695513] <==== rt28xx_init, Status=0
  285. [ 285.714871] @@@ ed_monitor_exit : ===>
  286. [ 285.718751] @@@ ed_monitor_exit : <===
  287. [ 285.722560] mt7628_set_ed_cca: TURN OFF EDCCA mac 0x10618 = 0xd7083f0f, EDCCA_Status=0
  288. [ 285.730694] WiFi Startup Cost (ra0): 6.240s
  289. [ 287.247708] PeerAssocReqSanity - IE_HT_CAP
  290. [ 287.251956] PeerAssocReqSanity - IE_EXT_CAPABILITY!
  291. [ 287.372629] Rcv Wcid(1) AddBAReq
  292. [ 287.375918] Start Seq = 00000001
  293. [ 331.942658] MtAsicSetPreTbtt(): bss_idx=0, PreTBTT timeout = 0x0
  294. [ 331.948838] MtAsicSetPiggyBack(796): Not support for HIF_MT yet!
  295. [ 331.955072] ap_ftkd> Release FT KDP Module...
  296. [ 332.471649] tx_kickout_fail_count = 0
  297. [ 332.475375] tx_timeout_fail_count = 0
  298. [ 332.479120] rx_receive_fail_count = 0
  299. [ 332.482829] alloc_cmd_msg = 86
  300. [ 332.485920] free_cmd_msg = 86
  301. [ 332.521659] TX_BCN DESC a292f000 size = 320
  302. [ 332.525947] RX[0] DESC a2932000 size = 1024
  303. [ 332.530422] RX[1] DESC a2933000 size = 1024
  304. [ 332.543448] cfg_mode=9
  305. [ 332.545852] cfg_mode=9
  306. [ 332.548248] wmode_band_equal(): Band Equal!
  307. [ 332.553069] AndesSendCmdMsg: Could not send in band command due to diable fRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD
  308. [ 332.564964] APSDCapable[0]=1
  309. [ 332.567883] APSDCapable[1]=1
  310. [ 332.570814] APSDCapable[2]=1
  311. [ 332.573731] APSDCapable[3]=1
  312. [ 332.576648] APSDCapable[4]=1
  313. [ 332.579581] APSDCapable[5]=1
  314. [ 332.582497] APSDCapable[6]=1
  315. [ 332.585414] APSDCapable[7]=1
  316. [ 332.588330] APSDCapable[8]=1
  317. [ 332.591257] APSDCapable[9]=1
  318. [ 332.594174] APSDCapable[10]=1
  319. [ 332.597178] APSDCapable[11]=1
  320. [ 332.600194] APSDCapable[12]=1
  321. [ 332.603201] APSDCapable[13]=1
  322. [ 332.606206] APSDCapable[14]=1
  323. [ 332.609222] APSDCapable[15]=1
  324. [ 332.612227] default ApCliAPSDCapable[0]=1
  325. [ 332.808168] Key1Str is Invalid key length(0) or Type(1)
  326. [ 332.813694] Key2Str is Invalid key length(0) or Type(1)
  327. [ 332.819223] Key3Str is Invalid key length(0) or Type(1)
  328. [ 332.824731] Key4Str is Invalid key length(0) or Type(1)
  329. [ 332.859186] RtmpOSFileOpen(): Error 2 opening /etc/Wireless/RT2860AP/SingleSKU.dat
  330. [ 332.866925] load fw image from fw_header_image
  331. [ 332.871447] AndesMTLoadFwMethod1(2182)::pChipCap->fw_len(63888)
  332. [ 332.877444] FW Version:
  333. [ 332.877449] 2
  334. [ 332.879935] 0
  335. [ 332.881528] 1
  336. [ 332.883122] 5
  337. [ 332.884716] 1
  338. [ 332.886310] 2
  339. [ 332.887902] 0
  340. [ 332.889508] 1
  341. [ 332.891103]
  342. [ 332.892697]
  343. [ 332.894290]
  344. [ 332.897386] FW Build Date:
  345. [ 332.897390] 2
  346. [ 332.900139] 0
  347. [ 332.901732] 1
  348. [ 332.903326] 5
  349. [ 332.904920] 1
  350. [ 332.906514] 2
  351. [ 332.908107] 0
  352. [ 332.909712] 1
  353. [ 332.911306] 1
  354. [ 332.912900] 8
  355. [ 332.914493] 3
  356. [ 332.916086] 6
  357. [ 332.917679] 4
  358. [ 332.919284] 1
  359. [ 332.920878]
  360. [ 332.922472]
  361. [ 332.926002] CmdReStartDLRsp: WiFI FW Download Success
  362. [ 332.932657] CmdAddressLenReq:(ret = 0)
  363. [ 332.937233] CmdFwStartReq: override = 1, address = 1048576
  364. [ 332.942913] CmdStartDLRsp: WiFI FW Download Success
  365. [ 332.947887] MtAsicDMASchedulerInit(): DMA Scheduler Mode=0(LMAC)
  366. [ 332.954070] efuse_probe: efuse = 10000012
  367. [ 332.958136] RtmpChipOpsEepromHook::e2p_type=2, inf_Type=4
  368. [ 332.963620] RtmpEepromGetDefault::e2p_dafault=2
  369. [ 332.968212] RtmpChipOpsEepromHook: E2P type(2), E2pAccessMode = 2, E2P default = 2
  370. [ 332.975936] NVM is FLASH mode
  371. [ 332.979022] 1. Phy Mode = 14
  372. [ 332.981974] flash_bin_read : a=262144 b=1024
  373. [ 332.986387] net ra0: Direct firmware load for mt7628.eeprom.bin failed with error -2
  374. [ 332.994264] net ra0: Falling back to user helper
  375. [ 333.050055] firmware mt7628.eeprom.bin: firmware_loading_store: map pages failed
  376. [ 333.057753] os_load_code_from_bin:fw not available(/lib/firmware/mt7628.eeprom.bin)
  377. [ 333.229314] Country Region from e2p = ffff
  378. [ 333.233750] tssi_1_target_pwr_g_band = 39
  379. [ 333.237905] 2. Phy Mode = 14
  380. [ 333.241458] 3. Phy Mode = 14
  381. [ 333.244381] NICInitPwrPinCfg(11): Not support for HIF_MT yet!
  382. [ 333.250233] NICInitializeAsic(651): Not support rtmp_mac_sys_reset () for HIF_MT yet!
  383. [ 333.258168] mt_mac_init()-->
  384. [ 333.261095] MtAsicInitMac()-->
  385. [ 333.265105] mt7628_init_mac_cr()-->
  386. [ 333.268711] MtAsicSetMacMaxLen(1276): Set the Max RxPktLen=1024!
  387. [ 333.274796] <--mt_mac_init()
  388. [ 333.277874] WTBL Segment 1 info:
  389. [ 333.281244] MemBaseAddr/FID:0x28000/0
  390. [ 333.285131] EntrySize/Cnt:32/128
  391. [ 333.288585] WTBL Segment 2 info:
  392. [ 333.291941] MemBaseAddr/FID:0x40000/0
  393. [ 333.295825] EntrySize/Cnt:64/128
  394. [ 333.299279] WTBL Segment 3 info:
  395. [ 333.302634] MemBaseAddr/FID:0x42000/64
  396. [ 333.306606] EntrySize/Cnt:64/128
  397. [ 333.310061] WTBL Segment 4 info:
  398. [ 333.313416] MemBaseAddr/FID:0x44000/128
  399. [ 333.317476] EntrySize/Cnt:32/128
  400. [ 333.321012] AntCfgInit(2958): Not support for HIF_MT yet!
  401. [ 333.326628] MCS Set = ff ff 00 00 01
  402. [ 333.330279] MtAsicSetChBusyStat(861): Not support for HIF_MT yet!
  403. [ 333.345589] SYNC - BBP R4 to 20MHz.l
  404. [ 333.966423] SYNC - BBP R4 to 20MHz.l
  405. [ 334.576426] SYNC - BBP R4 to 20MHz.l
  406. [ 335.185316] SYNC - BBP R4 to 20MHz.l
  407. [ 335.795423] SYNC - BBP R4 to 20MHz.l
  408. [ 336.407522] SYNC - BBP R4 to 20MHz.l
  409. [ 337.026436] SYNC - BBP R4 to 20MHz.l
  410. [ 337.637567] SYNC - BBP R4 to 20MHz.l
  411. [ 338.245314] SYNC - BBP R4 to 20MHz.l
  412. [ 338.848551] [PMF]ap_pmf_init:: apidx=0, MFPC=0, MFPR=0, SHA256=0
  413. [ 338.854669] [PMF]RTMPMakeRsnIeCap: RSNIE Capability MFPC=0, MFPR=0
  414. [ 338.861016] MtAsicSetRalinkBurstMode(3048): Not support for HIF_MT yet!
  415. [ 338.867722] MtAsicSetPiggyBack(796): Not support for HIF_MT yet!
  416. [ 338.896210] reload DPD from flash , 0x9F = [c6ff] doReload bit7[1]
  417. [ 338.902539] CmdLoadDPDDataFromFlash: Channel = 6, DoReload = 1
  418. [ 338.908564] MtAsicSetTxPreamble(3027): Not support for HIF_MT yet!
  419. [ 338.918652] MtAsicAddSharedKeyEntry(1343): Not support for HIF_MT yet!
  420. [ 338.925362] MtAsicSetPreTbtt(): bss_idx=0, PreTBTT timeout = 0xf0
  421. [ 338.931570] ap_ftkd> Initialize FT KDP Module...
  422. [ 338.936257] Main bssid = 00:00:00:00:00:a8
  423. [ 338.940498] <==== rt28xx_init, Status=0
  424. [ 338.944451] @@@ ed_monitor_exit : ===>
  425. [ 338.948248] @@@ ed_monitor_exit : <===
  426. [ 338.952067] mt7628_set_ed_cca: TURN OFF EDCCA mac 0x10618 = 0xd7083f0f, EDCCA_Status=0
  427. [ 338.960195] WiFi Startup Cost (ra0): 6.440s
  428. [ 338.964601] IPv6: ADDRCONF(NETDEV_UP): ra0: link is not ready
  429. [ 338.970949] IPv6: ADDRCONF(NETDEV_CHANGE): ra0: link becomes ready
  430. [ 339.050449] br-lan: port 2(ra0) entered blocking state
  431. [ 339.055673] br-lan: port 2(ra0) entered disabled state
  432. [ 339.061345] device ra0 entered promiscuous mode
  433. [ 339.066068] br-lan: port 2(ra0) entered blocking state
  434. [ 339.071331] br-lan: port 2(ra0) entered forwarding state
  435. [ 339.105608] AddTxSType: already registered TxSType (PID = 32, Format = 0
  436. [ 556.459902] br-lan: port 2(ra0) entered disabled state
  437. [ 556.465240] br-lan: port 1(eth0.1) entered disabled state
  438. [ 556.499104] device eth0.1 left promiscuous mode
  439. [ 556.503874] br-lan: port 1(eth0.1) entered disabled state
  440. [ 556.533132] IPv6: ADDRCONF(NETDEV_UP): eth0.1: link is not ready
  441. [ 556.551690] device ra0 left promiscuous mode
  442. [ 556.556171] br-lan: port 2(ra0) entered disabled state
  443. [ 556.903149] device eth0 left promiscuous mode
  444. [ 559.746541] br-lan: port 1(eth0.1) entered blocking state
  445. [ 559.752102] br-lan: port 1(eth0.1) entered disabled state
  446. [ 559.757932] device eth0.1 entered promiscuous mode
  447. [ 559.762858] device eth0 entered promiscuous mode
  448. [ 559.783064] br-lan: port 1(eth0.1) entered blocking state
  449. [ 559.788617] br-lan: port 1(eth0.1) entered forwarding state
  450. [ 559.794486] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
  451. [ 559.858107] MtAsicSetPreTbtt(): bss_idx=0, PreTBTT timeout = 0x0
  452. [ 559.864297] MtAsicSetPiggyBack(796): Not support for HIF_MT yet!
  453. [ 559.870644] ap_ftkd> Release FT KDP Module...
  454. [ 560.617199] tx_kickout_fail_count = 0
  455. [ 560.620988] tx_timeout_fail_count = 0
  456. [ 560.624698] rx_receive_fail_count = 0
  457. [ 560.628406] alloc_cmd_msg = 87
  458. [ 560.631508] free_cmd_msg = 87
  459. [ 560.642824] TX_BCN DESC a292f000 size = 320
  460. [ 560.647274] RX[0] DESC a2932000 size = 1024
  461. [ 560.651746] RX[1] DESC a2933000 size = 1024
  462. [ 560.665769] cfg_mode=9
  463. [ 560.668174] cfg_mode=9
  464. [ 560.670630] wmode_band_equal(): Band Equal!
  465. [ 560.675388] AndesSendCmdMsg: Could not send in band command due to diable fRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD
  466. [ 560.687282] APSDCapable[0]=1
  467. [ 560.690210] APSDCapable[1]=1
  468. [ 560.693126] APSDCapable[2]=1
  469. [ 560.696040] APSDCapable[3]=1
  470. [ 560.698972] APSDCapable[4]=1
  471. [ 560.701887] APSDCapable[5]=1
  472. [ 560.704801] APSDCapable[6]=1
  473. [ 560.707718] APSDCapable[7]=1
  474. [ 560.710658] APSDCapable[8]=1
  475. [ 560.713575] APSDCapable[9]=1
  476. [ 560.716490] APSDCapable[10]=1
  477. [ 560.719516] APSDCapable[11]=1
  478. [ 560.722522] APSDCapable[12]=1
  479. [ 560.725526] APSDCapable[13]=1
  480. [ 560.728543] APSDCapable[14]=1
  481. [ 560.731547] APSDCapable[15]=1
  482. [ 560.734553] default ApCliAPSDCapable[0]=1
  483. [ 560.930516] Key1Str is Invalid key length(0) or Type(1)
  484. [ 560.936016] Key2Str is Invalid key length(0) or Type(1)
  485. [ 560.941544] Key3Str is Invalid key length(0) or Type(1)
  486. [ 560.947051] Key4Str is Invalid key length(0) or Type(1)
  487. [ 560.981510] RtmpOSFileOpen(): Error 2 opening /etc/Wireless/RT2860AP/SingleSKU.dat
  488. [ 560.989268] load fw image from fw_header_image
  489. [ 560.993771] AndesMTLoadFwMethod1(2182)::pChipCap->fw_len(63888)
  490. [ 560.999778] FW Version:
  491. [ 560.999784] 2
  492. [ 561.002258] 0
  493. [ 561.003852] 1
  494. [ 561.005445] 5
  495. [ 561.007036] 1
  496. [ 561.008641] 2
  497. [ 561.010235] 0
  498. [ 561.011828] 1
  499. [ 561.013422]
  500. [ 561.015016]
  501. [ 561.016610]
  502. [ 561.019715] FW Build Date:
  503. [ 561.019719] 2
  504. [ 561.022458] 0
  505. [ 561.024052] 1
  506. [ 561.025646] 5
  507. [ 561.027239] 1
  508. [ 561.028844] 2
  509. [ 561.030438] 0
  510. [ 561.032031] 1
  511. [ 561.033622] 1
  512. [ 561.035216] 8
  513. [ 561.036810] 3
  514. [ 561.038403] 6
  515. [ 561.040008] 4
  516. [ 561.041602] 1
  517. [ 561.043196]
  518. [ 561.044790]
  519. [ 561.048190] CmdReStartDLRsp: WiFI FW Download Success
  520. [ 561.053963] CmdAddressLenReq:(ret = 0)
  521. [ 561.058592] CmdFwStartReq: override = 1, address = 1048576
  522. [ 561.064193] CmdStartDLRsp: WiFI FW Download Success
  523. [ 561.069190] MtAsicDMASchedulerInit(): DMA Scheduler Mode=0(LMAC)
  524. [ 561.075292] efuse_probe: efuse = 10000012
  525. [ 561.079373] RtmpChipOpsEepromHook::e2p_type=2, inf_Type=4
  526. [ 561.084844] RtmpEepromGetDefault::e2p_dafault=2
  527. [ 561.089448] RtmpChipOpsEepromHook: E2P type(2), E2pAccessMode = 2, E2P default = 2
  528. [ 561.097117] NVM is FLASH mode
  529. [ 561.100190] 1. Phy Mode = 14
  530. [ 561.103111] flash_bin_read : a=262144 b=1024
  531. [ 561.107521] net ra0: Direct firmware load for mt7628.eeprom.bin failed with error -2
  532. [ 561.115393] net ra0: Falling back to user helper
  533. [ 561.171210] firmware mt7628.eeprom.bin: firmware_loading_store: map pages failed
  534. [ 561.178995] os_load_code_from_bin:fw not available(/lib/firmware/mt7628.eeprom.bin)
  535. [ 561.350492] Country Region from e2p = ffff
  536. [ 561.354739] tssi_1_target_pwr_g_band = 39
  537. [ 561.358838] 2. Phy Mode = 14
  538. [ 561.362271] 3. Phy Mode = 14
  539. [ 561.365194] NICInitPwrPinCfg(11): Not support for HIF_MT yet!
  540. [ 561.371037] NICInitializeAsic(651): Not support rtmp_mac_sys_reset () for HIF_MT yet!
  541. [ 561.378983] mt_mac_init()-->
  542. [ 561.381908] MtAsicInitMac()-->
  543. [ 561.385301] mt7628_init_mac_cr()-->
  544. [ 561.388884] MtAsicSetMacMaxLen(1276): Set the Max RxPktLen=1024!
  545. [ 561.394968] <--mt_mac_init()
  546. [ 561.398045] WTBL Segment 1 info:
  547. [ 561.401413] MemBaseAddr/FID:0x28000/0
  548. [ 561.405300] EntrySize/Cnt:32/128
  549. [ 561.408754] WTBL Segment 2 info:
  550. [ 561.412109] MemBaseAddr/FID:0x40000/0
  551. [ 561.415993] EntrySize/Cnt:64/128
  552. [ 561.419446] WTBL Segment 3 info:
  553. [ 561.422802] MemBaseAddr/FID:0x42000/64
  554. [ 561.426774] EntrySize/Cnt:64/128
  555. [ 561.430227] WTBL Segment 4 info:
  556. [ 561.433583] MemBaseAddr/FID:0x44000/128
  557. [ 561.437643] EntrySize/Cnt:32/128
  558. [ 561.441180] AntCfgInit(2958): Not support for HIF_MT yet!
  559. [ 561.446794] MCS Set = ff ff 00 00 01
  560. [ 561.450445] MtAsicSetChBusyStat(861): Not support for HIF_MT yet!
  561. [ 561.465721] SYNC - BBP R4 to 20MHz.l
  562. [ 562.076412] SYNC - BBP R4 to 20MHz.l
  563. [ 562.685346] SYNC - BBP R4 to 20MHz.l
  564. [ 563.295325] SYNC - BBP R4 to 20MHz.l
  565. [ 563.905311] SYNC - BBP R4 to 20MHz.l
  566. [ 564.516409] SYNC - BBP R4 to 20MHz.l
  567. [ 565.126445] SYNC - BBP R4 to 20MHz.l
  568. [ 565.737524] SYNC - BBP R4 to 20MHz.l
  569. [ 566.346411] SYNC - BBP R4 to 20MHz.l
  570. [ 566.948545] [PMF]ap_pmf_init:: apidx=0, MFPC=0, MFPR=0, SHA256=0
  571. [ 566.954662] [PMF]RTMPMakeRsnIeCap: RSNIE Capability MFPC=0, MFPR=0
  572. [ 566.961016] MtAsicSetRalinkBurstMode(3048): Not support for HIF_MT yet!
  573. [ 566.967722] MtAsicSetPiggyBack(796): Not support for HIF_MT yet!
  574. [ 566.996139] reload DPD from flash , 0x9F = [c6ff] doReload bit7[1]
  575. [ 567.002474] CmdLoadDPDDataFromFlash: Channel = 6, DoReload = 1
  576. [ 567.008588] MtAsicSetTxPreamble(3027): Not support for HIF_MT yet!
  577. [ 567.018660] MtAsicAddSharedKeyEntry(1343): Not support for HIF_MT yet!
  578. [ 567.025491] MtAsicSetPreTbtt(): bss_idx=0, PreTBTT timeout = 0xf0
  579. [ 567.031721] ap_ftkd> Initialize FT KDP Module...
  580. [ 567.036407] Main bssid = 00:00:00:00:00:a8
  581. [ 567.040647] <==== rt28xx_init, Status=0
  582. [ 567.044599] @@@ ed_monitor_exit : ===>
  583. [ 567.048398] @@@ ed_monitor_exit : <===
  584. [ 567.052218] mt7628_set_ed_cca: TURN OFF EDCCA mac 0x10618 = 0xd7083f0f, EDCCA_Status=0
  585. [ 567.060342] WiFi Startup Cost (ra0): 6.420s
  586. [ 567.065649] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
  587. [ 567.080439] br-lan: port 2(ra0) entered blocking state
  588. [ 567.085665] br-lan: port 2(ra0) entered disabled state
  589. [ 567.091294] device ra0 entered promiscuous mode
  590. [ 567.096066] br-lan: port 2(ra0) entered blocking state
  591. [ 567.101326] br-lan: port 2(ra0) entered forwarding state
  592. [ 613.726572] rt3050-esw 10110000.esw: link changed 0x06
  593. [ 618.160314] rt3050-esw 10110000.esw: link changed 0x04
  594. [ 677.911837] rt3050-esw 10110000.esw: link changed 0x06
  595. root@OpenWrt:~# packet_write_wait: Connection to 192.168.1.1 port 22: Broken pipe
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!