API tools faq
paste
sliq19882

Untitled

sliq19882
Jan 11th, 2021
44
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 44.70 KB | None | 0 0
raw download clone embed print report
  1.  
  2. BootROM 1.20
  3. Booting from SPI flash
  4. MARU_DEBUG_RESET
  5. High speed PHY - Ver 1.6.0 (COM-PHY-V20)
  6. Read Reg: 0x00020868= 01022200
  7. Write Reg: 0x00020868= 01022000
  8. Step 1: First phase of PEX-PIPE Configuration
  9. Write Reg: 0x00041B00= 00C10025
  10. Write Reg: 0x00041B00= 00C20200
  11. Write Reg: 0x00041B00= 00C5011F
  12. Write Reg: 0x00081B00= 00C10025
  13. Write Reg: 0x00081B00= 00C3000F
  14. Write Reg: 0x00081B00= 00C5011F
  15. Step 2: Configure the desire PIN_PHY_GEN
  16. Read Reg: 0x000A4058= 00000227
  17. Write Reg: 0x000A4058= 00000220
  18. Read Reg: 0x000A2058= 00000227
  19. Write Reg: 0x000A2058= 00000220
  20. Step 3 QSGMII enable
  21. Step 4: Configure SERDES MUXes
  22. Write Reg: 0x00018270= 02211111
  23. Write Reg: 0x00018274= 00000000
  24. Step 5: Activate the RX High Impedance Mode
  25. Write Reg: 0x00041B00= 00481084
  26. Write Reg: 0x00081B00= 00489084
  27. Write Reg: 0x000A4920= 00008084
  28. Write Reg: 0x000A2920= 00008084
  29. Step 6: [PEX-Only] PEX-Main configuration (X4 or X1)
  30. Write Reg: 0x00018204= 00000200
  31. Read Reg: 0x00018204= 00000200
  32. Write Reg: 0x00018204= 00000330
  33. Step 6.2: [PEX-Only] PCI Express Link Capabilities
  34. Read Reg: 0x0004006C= 0007AC42
  35. Write Reg: 0x0004006C= 0007AC42
  36. Read Reg: 0x0008006C= 0007AC12
  37. Write Reg: 0x0008006C= 0007AC12
  38. Step 7: [PEX-X4 Only] To create PEX-Link
  39. Read Reg: 0x000182F8= FFFF0000
  40. Write Reg: 0x000182F8= FFFF000F
  41. Steps 7,8,9,10 and 11
  42. Write Reg: 0x00041B00= 0001FC60
  43. Write Reg: 0x00081B00= 0001FC60
  44. Write Reg: 0x000A4804= 0000F801
  45. Write Reg: 0x000A488C= 00000400
  46. Write Reg: 0x000A4918= 00000400
  47. Read Reg: 0x000A4058= 00000220
  48. Write Reg: 0x000A4058= 00000227
  49. Write Reg: 0x000A2804= 0000F801
  50. Write Reg: 0x000A288C= 00000400
  51. Write Reg: 0x000A2918= 00000400
  52. Read Reg: 0x000A2058= 00000220
  53. Write Reg: 0x000A2058= 00000227
  54. Steps 12: [PEX-Only] Last phase of PEX-PIPE ConfigurationWrite Reg: 0x00041B00= 00C10024
  55. Write Reg: 0x00081B00= 00C10024
  56. Steps 13: Wait 15ms before checking resultsRead Reg: 0x000A405C= 00003007
  57. Read Reg: 0x000A205C= 00003007
  58. Steps 14: [PEX-Only] In order to configureRead Reg: 0x00040060= 00420010
  59. Write Reg: 0x00040060= 00420010
  60. Read Reg: 0x00080060= 00420010
  61. Write Reg: 0x00080060= 00420010
  62. Steps 15: [PEX-Only] In order to configureWrite Reg: 0x00041B00= 000F2A21
  63. Write Reg: 0x00041B00= 004F6219
  64. Write Reg: 0x00081B00= 000F2A21
  65. Write Reg: 0x00081B00= 004F6219
  66. Write Reg: 0x000A483C= 00008A31
  67. Write Reg: 0x000A4834= 0000C928
  68. Write Reg: 0x000A4838= 000030F0
  69. Write Reg: 0x000A4840= 000030F5
  70. Write Reg: 0x000A283C= 00008A31
  71. Write Reg: 0x000A2834= 0000C928
  72. Write Reg: 0x000A2838= 000030F0
  73. Write Reg: 0x000A2840= 000030F5
  74. Steps 16: [PEX-Only] Training EnableRead Reg: 0x00018204= 00000330
  75. Write Reg: 0x00018204= 00000333
  76. DDR3 Init. - SPD_SUPPORT: UNDEFINED
  77. DDR3 Init. - defined(MV88F78X60) && !defined(MV88F78X60_Z1) : True
  78. DDR3 Training Sequence - Ver 3.0.0
  79. DDR3 Init. - uiFabOpt : 5
  80. DDR3 Init. - socNum : 00000001
  81. DDR3 Traning Squence - Stage 0
  82. DDR3 Init. - uiCpuFreq : 00000003
  83. DDR3 Init. - ECC_SUPPORT: UNDEFINED
  84. DDR3 Init. - DQS_CLK_ALIGNED: UNDEFINED
  85. DDR3 Traning Squence - Stage 1
  86. DDR3 Training Sequence - Static MC Init
  87. DDR3 Init.[ddr3GetStaticDdrMode()] - chipBoardRev : 5
  88. * DDR3 Init.[ddr3GetStaticDdrMode()] - if chipBoardRev = A0 : 3
  89. * DDR3 Init.[ddr3GetStaticDdrMode()] - if chipBoardRev = B0 : 5
  90. * DDR3 Init.[ddr3GetStaticDdrMode()] - if chipBoardRev = Z1 : 0
  91. DDR3 Init.[ddr3GetStaticDdrMode()] - ddr3GetCpuFreq() : 3
  92. DDR3 Init.[ddr3GetStaticDdrMode()] - ddr3GetFabOpt() : 5
  93. i=0:ddr_modes[i]:cpuFreq[0003] fabFreq[0005] chipBoardRev[0005]
  94. DDR3 Init. - DUNIT_STATIC: DEFINED
  95. DDR3 Init. - AUTO_DETECTION_SUPPORT: UNDEFINED
  96. DDR3 Init. - MV88F78X60: DEFINED
  97. DDR3 Init. - DUNIT_SPD: UNDEFINED
  98. DDR3 Training Sequence - HW Training Procedure
  99. DDR3 Training Sequence - Switching XBAR Window to FastPath Window
  100. Buffalo : Over write the parameter 0x1538 -> 0x00000009
  101. Buffalo : Over write the parameter 0x153C -> 0x0000000f
  102. DDR3 Training Sequence - Ended Successfully
  103. BootROM: Image checksum verification PASSED
  104.  
  105.  
  106. U-Boot 2011.12 (Aug 17 2015 - 06:37:50) Marvell version: 2012_Q4.2
  107.  
  108. Board: BUFFALO TeraStation =TS3400D=
  109. SoC: MV78230 B0
  110. running 2 CPUs
  111. Custom configuration
  112. CPU: Marvell PJ4B (584) v7 (Rev 2) LE
  113. CPU 0
  114. CPU @ 1333 [MHz]
  115. L2 @ 667 [MHz]
  116. TClock @ 250 [MHz]
  117. DDR @ 667 [MHz]
  118. DDR 32Bit Width, FastPath Memory Access
  119. DDR ECC Disabled
  120. DRAM: 1024 MiB
  121.  
  122. Map: Code: 0x3fee1000:0x3ff9dda8
  123. BSS: 0x3ffefe64
  124. Stack: 0x3f9d0ef8
  125. PageTable: 0x003e0000
  126. Heap: 0x3f9d1000:0x3fee1000
  127.  
  128. NAND: 512 MiB
  129. MMC: MRVL_MMC: 0
  130. SF: Detected MX25L8006E with page size 64 KiB, total 1 MiB
  131. PEX 0.0(0): Root Complex Interface, Detected Link X4, GEN 1.1
  132. PEX 1.0(1): Root Complex Interface, Detected Link X1, GEN 2.0
  133. u-boot envinit tval=fec4433f
  134. BOOTVER=0.18
  135. FPU initialized to Run Fast Mode.
  136. USB 0: Host Mode
  137. USB 1: Host Mode
  138. USB 2: Host Mode
  139. sending BOOT_START
  140. Late init
  141. UCOM ID= 0
  142. boardId=4
  143. boot trigger=normal
  144.  
  145. Marvell Serial ATA Adapter
  146. Integrated Sata device found
  147. Found adapter at bus 0, device 1 ... Scanning channels
  148.  
  149. usb boot.
  150. Net: egiga0 [PRIME], egiga1
  151. Hit any key to stop autoboot: 3  2  1  0
  152. (Re)start USB...
  153. USB: Active port: 1
  154. Register 10011 NbrPorts 1
  155. USB EHCI 1.00
  156. scanning bus for devices... 2 USB Device(s) found
  157. scanning bus for storage devices... 1 Storage Device(s) found
  158. reading /uImage.buffalo
  159.  
  160. 5023173 bytes read
  161. reading /initrd.buffalo
  162.  
  163. 6434867 bytes read
  164. <<stop_sound>>
  165. ## Booting kernel from Legacy Image at 01200000 ...
  166. Image Name: kernel 5.10.0-1-armmp-lpae
  167. Created: 2021-01-11 20:03:27 UTC
  168. Image Type: ARM Linux Kernel Image (uncompressed)
  169. Data Size: 5023109 Bytes = 4.8 MiB
  170. Load Address: 00008000
  171. Entry Point: 00008000
  172. Verifying Checksum ... OK
  173. ## Loading init Ramdisk from Legacy Image at 02600000 ...
  174. Image Name: ramdisk 5.10.0-1-armmp-lpae
  175. Created: 2021-01-11 20:03:28 UTC
  176. Image Type: ARM Linux RAMDisk Image (uncompressed)
  177. Data Size: 6434803 Bytes = 6.1 MiB
  178. Load Address: 00000000
  179. Entry Point: 00000000
  180. Verifying Checksum ... OK
  181. Loading Kernel Image ... OK
  182. OK
  183.  
  184. Starting kernel ...
  185.  
  186. [ 0.000000] Booting Linux on physical CPU 0x0
  187. [ 0.000000] Linux version 5.10.0-1-armmp-lpae ([email protected]) (gcc-10 (Debian 10.2.1-3) 10.2.1 20201224, GNU ld (GNU Binutils for Debian) 2.35.1) #1 SMP Debian 5.10.4-1 (2020-12-31)
  188. [ 0.000000] CPU: ARMv7 Processor [562f5842] revision 2 (ARMv7), cr=30c5387d
  189. [ 0.000000] CPU: div instructions available: patching division code
  190. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
  191. [ 0.000000] OF: fdt: Machine model: Buffalo Terastation TS3400R
  192. [ 0.000000] Memory policy: Data cache writealloc
  193. [ 0.000000] efi: UEFI not found.
  194. [ 0.000000] cma: Reserved 16 MiB at 0x000000003e800000
  195. [ 0.000000] Zone ranges:
  196. [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff]
  197. [ 0.000000] Normal empty
  198. [ 0.000000] HighMem [mem 0x0000000030000000-0x000000003fffefff]
  199. [ 0.000000] Movable zone start for each node
  200. [ 0.000000] Early memory node ranges
  201. [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003fffefff]
  202. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000003fffefff]
  203. [ 0.000000] percpu: Embedded 21 pages/cpu s54348 r8192 d23476 u86016
  204. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 259839
  205. [ 0.000000] Kernel command line: console=ttyS0,115200 panic=5 mtdparts=armada-nand:-(nandubifs) ubi.mtd=1 BOOTVER=0.18 UBOOT_DATE=2015/08/17 earlyprintk
  206. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
  207. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
  208. [ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
  209. [ 0.000000] software IO TLB: mapped [mem 0x000000002b302000-0x000000002f302000] (64MB)
  210. [ 0.000000] Memory: 926180K/1048572K available (12288K kernel code, 1675K rwdata, 3188K rodata, 2048K init, 340K bss, 106008K reserved, 16384K cma-reserved, 245756K highmem)
  211. [ 0.000000] random: get_random_u32 called from __kmem_cache_create+0x34/0x438 with crng_init=0
  212. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  213. [ 0.000000] ftrace: allocating 37417 entries in 74 pages
  214. [ 0.000000] ftrace: allocated 74 pages with 3 groups
  215. [ 0.000000] rcu: Hierarchical RCU implementation.
  216. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
  217. [ 0.000000] Rude variant of Tasks RCU enabled.
  218. [ 0.000000] Tracing variant of Tasks RCU enabled.
  219. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  220. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
  221. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  222. [ 0.000000] L2C: DT/platform modifies aux control register: 0x12096b00 -> 0x1a096b02
  223. [ 0.000000] Aurora cache controller enabled, 16 ways, 1024 kB
  224. [ 0.000000] Aurora: CACHE_ID 0x00000100, AUX_CTRL 0x1a096b02
  225. [ 0.000000] Switching to timer-based delay loop, resolution 40ns
  226. [ 0.000006] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 85899345900ns
  227. [ 0.000018] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
  228. [ 0.001255] Console: colour dummy device 80x30
  229. [ 0.001298] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=100000)
  230. [ 0.001314] pid_max: default: 32768 minimum: 301
  231. [ 0.001493] LSM: Security Framework initializing
  232. [ 0.001545] Yama: disabled by default; enable with sysctl kernel.yama.*
  233. [ 0.001680] AppArmor: AppArmor initialized
  234. [ 0.001692] TOMOYO Linux initialized
  235. [ 0.001757] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
  236. [ 0.001771] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
  237. [ 0.002556] CPU: Testing write buffer coherency: ok
  238. [ 0.002793] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  239. [ 0.003453] Setting up static identity map for 0x400000 - 0x4000ac
  240. [ 0.003758] mvebu-soc-id: MVEBU SoC ID=0x7823, Rev=0x2
  241. [ 0.003850] mvebu-pmsu: Initializing Power Management Service Unit
  242. [ 0.003988] rcu: Hierarchical SRCU implementation.
  243. [ 0.005296] EFI services will not be available.
  244. [ 0.005566] smp: Bringing up secondary CPUs ...
  245. [ 0.006063] Booting CPU 1
  246. [ 0.006517] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  247. [ 0.010601] smp: Brought up 1 node, 2 CPUs
  248. [ 0.010614] SMP: Total of 2 processors activated (100.00 BogoMIPS).
  249. [ 0.010620] CPU: All CPU(s) started in SVC mode.
  250. [ 0.011312] devtmpfs: initialized
  251. [ 0.015053] VFP support v0.3: implementor 56 architecture 2 part 20 variant 9 rev 6
  252. [ 0.015526] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  253. [ 0.015555] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
  254. [ 0.016527] pinctrl core: initialized pinctrl subsystem
  255. [ 0.017233] DMI not present or invalid.
  256. [ 0.017515] NET: Registered protocol family 16
  257. [ 0.019269] DMA: preallocated 256 KiB pool for atomic coherent allocations
  258. [ 0.019888] audit: initializing netlink subsys (disabled)
  259. [ 0.020107] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
  260. [ 0.020860] thermal_sys: Registered thermal governor 'fair_share'
  261. [ 0.020866] thermal_sys: Registered thermal governor 'step_wise'
  262. [ 0.021063] No ATAGs?
  263. [ 0.021100] hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 0
  264. [ 0.021109] hw-breakpoint: CPU 0 failed to disable vector catch
  265. [ 0.021143] hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 1
  266. [ 0.021857] Serial: AMBA PL011 UART driver
  267. [ 0.042579] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  268. [ 1.378516] iommu: Default domain type: Translated
  269. [ 1.379047] vgaarb: loaded
  270. [ 1.379652] mc: Linux media interface: v0.10
  271. [ 1.379685] videodev: Linux video capture interface: v2.00
  272. [ 1.380910] NetLabel: Initializing
  273. [ 1.380920] NetLabel: domain hash size = 128
  274. [ 1.380927] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
  275. [ 1.381010] NetLabel: unlabeled traffic allowed by default
  276. [ 1.381302] clocksource: Switched to clocksource armada_370_xp_clocksource
  277. [ 1.439051] VFS: Disk quotas dquot_6.6.0
  278. [ 1.439129] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  279. [ 1.439713] AppArmor: AppArmor Filesystem Enabled
  280. [ 1.448953] NET: Registered protocol family 2
  281. [ 1.449727] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
  282. [ 1.449767] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
  283. [ 1.449832] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
  284. [ 1.449893] TCP: Hash tables configured (established 8192 bind 8192)
  285. [ 1.449996] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
  286. [ 1.450027] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
  287. [ 1.450186] NET: Registered protocol family 1
  288. [ 1.450223] NET: Registered protocol family 44
  289. [ 1.450236] PCI: CLS 0 bytes, default 64
  290. [ 1.450554] Trying to unpack rootfs image as initramfs...
  291. [ 1.688153] Freeing initrd memory: 6288K
  292. [ 1.688825] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
  293. [ 1.690360] Initialise system trusted keyrings
  294. [ 1.690402] Key type blacklist registered
  295. [ 1.690589] workingset: timestamp_bits=14 max_order=18 bucket_order=4
  296. [ 1.696353] zbud: loaded
  297. [ 1.697114] integrity: Platform Keyring initialized
  298. [ 1.697132] Key type asymmetric registered
  299. [ 1.697140] Asymmetric key parser 'x509' registered
  300. [ 1.697282] bounce: pool size: 64 pages
  301. [ 1.697384] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
  302. [ 1.697578] io scheduler mq-deadline registered
  303. [ 1.700848] armada-xp-pinctrl d0018000.pin-ctrl: registered pinctrl driver
  304. [ 1.704037] mvebu-pcie soc:pcie@82000000: host bridge /soc/pcie@82000000 ranges:
  305. [ 1.704079] mvebu-pcie soc:pcie@82000000: MEM 0x00d0040000..0x00d0041fff -> 0x0000040000
  306. [ 1.704106] mvebu-pcie soc:pcie@82000000: MEM 0x00d0044000..0x00d0045fff -> 0x0000044000
  307. [ 1.704130] mvebu-pcie soc:pcie@82000000: MEM 0x00d0048000..0x00d0049fff -> 0x0000048000
  308. [ 1.704154] mvebu-pcie soc:pcie@82000000: MEM 0x00d004c000..0x00d004dfff -> 0x000004c000
  309. [ 1.704177] mvebu-pcie soc:pcie@82000000: MEM 0x00d0080000..0x00d0081fff -> 0x0000080000
  310. [ 1.704201] mvebu-pcie soc:pcie@82000000: MEM 0xffffffffffffffff..0x00fffffffe -> 0x0100000000
  311. [ 1.704223] mvebu-pcie soc:pcie@82000000: IO 0xffffffffffffffff..0x00fffffffe -> 0x0100000000
  312. [ 1.704245] mvebu-pcie soc:pcie@82000000: MEM 0xffffffffffffffff..0x00fffffffe -> 0x0200000000
  313. [ 1.704266] mvebu-pcie soc:pcie@82000000: IO 0xffffffffffffffff..0x00fffffffe -> 0x0200000000
  314. [ 1.704288] mvebu-pcie soc:pcie@82000000: MEM 0xffffffffffffffff..0x00fffffffe -> 0x0300000000
  315. [ 1.704310] mvebu-pcie soc:pcie@82000000: IO 0xffffffffffffffff..0x00fffffffe -> 0x0300000000
  316. [ 1.704332] mvebu-pcie soc:pcie@82000000: MEM 0xffffffffffffffff..0x00fffffffe -> 0x0400000000
  317. [ 1.704353] mvebu-pcie soc:pcie@82000000: IO 0xffffffffffffffff..0x00fffffffe -> 0x0400000000
  318. [ 1.704375] mvebu-pcie soc:pcie@82000000: MEM 0xffffffffffffffff..0x00fffffffe -> 0x0500000000
  319. [ 1.704390] mvebu-pcie soc:pcie@82000000: IO 0xffffffffffffffff..0x00fffffffe -> 0x0500000000
  320. [ 1.704661] mvebu-pcie soc:pcie@82000000: PCI host bridge to bus 0000:00
  321. [ 1.704677] pci_bus 0000:00: root bus resource [bus 00-ff]
  322. [ 1.704689] pci_bus 0000:00: root bus resource [mem 0xd0040000-0xd0041fff] (bus address [0x00040000-0x00041fff])
  323. [ 1.704700] pci_bus 0000:00: root bus resource [mem 0xd0044000-0xd0045fff] (bus address [0x00044000-0x00045fff])
  324. [ 1.704711] pci_bus 0000:00: root bus resource [mem 0xd0048000-0xd0049fff] (bus address [0x00048000-0x00049fff])
  325. [ 1.704721] pci_bus 0000:00: root bus resource [mem 0xd004c000-0xd004dfff] (bus address [0x0004c000-0x0004dfff])
  326. [ 1.704732] pci_bus 0000:00: root bus resource [mem 0xd0080000-0xd0081fff] (bus address [0x00080000-0x00081fff])
  327. [ 1.704741] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xffdfffff]
  328. [ 1.704750] pci_bus 0000:00: root bus resource [io 0x1000-0xeffff]
  329. [ 1.704850] pci 0000:00:01.0: [11ab:7823] type 01 class 0x060400
  330. [ 1.704873] pci 0000:00:01.0: reg 0x38: [mem 0x00000000-0x000007ff pref]
  331. [ 1.705379] pci 0000:00:05.0: [11ab:7846] type 01 class 0x060400
  332. [ 1.705401] pci 0000:00:05.0: reg 0x38: [mem 0x00000000-0x000007ff pref]
  333. [ 1.706589] PCI: bus0: Fast back to back transfers disabled
  334. [ 1.706604] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  335. [ 1.706618] pci 0000:00:05.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  336. [ 1.706750] pci 0000:01:00.0: [11ab:7042] type 00 class 0x010000
  337. [ 1.706781] pci 0000:01:00.0: reg 0x10: [mem 0x40000000-0x400fffff 64bit]
  338. [ 1.706798] pci 0000:01:00.0: reg 0x18: [io 0xffffff00-0xffffffff]
  339. [ 1.707061] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
  340. [ 1.708109] PCI: bus1: Fast back to back transfers disabled
  341. [ 1.708122] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
  342. [ 1.708288] pci 0000:02:00.0: [1912:0015] type 00 class 0x0c0330
  343. [ 1.708325] pci 0000:02:00.0: reg 0x10: [mem 0x4a000000-0x4a001fff 64bit]
  344. [ 1.708489] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
  345. [ 1.718385] PCI: bus2: Fast back to back transfers disabled
  346. [ 1.718400] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
  347. [ 1.718462] pci 0000:00:01.0: BAR 8: assigned [mem 0xf8000000-0xf80fffff]
  348. [ 1.718477] pci 0000:00:05.0: BAR 8: assigned [mem 0xf8100000-0xf81fffff]
  349. [ 1.718488] pci 0000:00:01.0: BAR 7: assigned [io 0x10000-0x10fff]
  350. [ 1.718502] pci 0000:00:01.0: BAR 6: assigned [mem 0xf8200000-0xf82007ff pref]
  351. [ 1.718517] pci 0000:00:05.0: BAR 6: assigned [mem 0xf8300000-0xf83007ff pref]
  352. [ 1.718533] pci 0000:01:00.0: BAR 0: assigned [mem 0xf8000000-0xf80fffff 64bit]
  353. [ 1.718551] pci 0000:01:00.0: BAR 2: assigned [io 0x10000-0x100ff]
  354. [ 1.718563] pci 0000:00:01.0: PCI bridge to [bus 01]
  355. [ 1.718573] pci 0000:00:01.0: bridge window [io 0x10000-0x10fff]
  356. [ 1.718585] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xf80fffff]
  357. [ 1.718602] pci 0000:02:00.0: BAR 0: assigned [mem 0xf8100000-0xf8101fff 64bit]
  358. [ 1.718620] pci 0000:00:05.0: PCI bridge to [bus 02]
  359. [ 1.718631] pci 0000:00:05.0: bridge window [mem 0xf8100000-0xf81fffff]
  360. [ 1.718704] pcieport 0000:00:01.0: enabling device (0140 -> 0143)
  361. [ 1.718790] pcieport 0000:00:05.0: enabling device (0140 -> 0142)
  362. [ 1.722220] mv_xor d0060900.xor: Marvell shared XOR driver
  363. [ 1.750357] mv_xor d0060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
  364. [ 1.750652] mv_xor d00f0900.xor: Marvell shared XOR driver
  365. [ 1.778337] mv_xor d00f0900.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
  366. [ 1.780895] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled
  367. [ 1.783053] printk: console [ttyS0] disabled
  368. [ 1.803326] d0012000.serial: ttyS0 at MMIO 0xd0012000 (irq = 27, base_baud = 15625000) is a 16550A
  369. [ 2.986502] printk: console [ttyS0] enabled
  370. [ 3.011659] d0012100.serial: ttyS2 at MMIO 0xd0012100 (irq = 28, base_baud = 15625000) is a 16550A
  371. [ 3.041519] d0012200.serial: ttyS3 at MMIO 0xd0012200 (irq = 39, base_baud = 15625000) is a 16550A
  372. [ 3.071369] d0012300.serial: ttyS1 at MMIO 0xd0012300 (irq = 40, base_baud = 15625000) is a 16550A
  373. [ 3.081193] Serial: AMBA driver
  374. [ 3.085414] STM32 USART driver initialized
  375. [ 3.091567] libphy: Fixed MDIO Bus: probed
  376. [ 3.096250] mousedev: PS/2 mouse device common for all mice
  377. [ 3.207120] ledtrig-cpu: registered to indicate activity on CPUs
  378. [ 3.214444] NET: Registered protocol family 10
  379. [ 3.261217] Segment Routing with IPv6
  380. [ 3.265028] mip6: Mobile IPv6
  381. [ 3.268046] NET: Registered protocol family 17
  382. [ 3.272697] mpls_gso: MPLS GSO support
  383. [ 3.276630] ThumbEE CPU extension supported.
  384. [ 3.280942] Registering SWP/SWPB emulation handler
  385. [ 3.285905] registered taskstats version 1
  386. [ 3.290045] Loading compiled-in X.509 certificates
  387. [ 3.600793] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
  388. [ 3.609649] Loaded X.509 cert 'Debian Secure Boot Signer 2020: 00b55eb3b9'
  389. [ 3.616649] zswap: loaded using pool lzo/zbud
  390. [ 3.621630] Key type ._fscrypt registered
  391. [ 3.625689] Key type .fscrypt registered
  392. [ 3.629666] Key type fscrypt-provisioning registered
  393. [ 3.634855] AppArmor: AppArmor sha1 policy hashing enabled
  394. [ 3.645255] input: gpio-keys as /devices/platform/gpio-keys/input/input0
  395. [ 3.660017] Freeing unused kernel memory: 2048K
  396. [ 3.666399] Checked W+X mappings: passed, no W+X pages found
  397. [ 3.672117] Run /init as init process
  398. Loading, please wait...
  399. Starting version 247.2-4
  400. [ 4.163857] usbcore: module verification failed: signature and/or required key missing - tainting kernel
  401. [ 4.249143] SCSI subsystem initialized
  402. [ 4.254966] usbcore: registered new interface driver usbfs
  403. [ 4.272164] usbcore: registered new interface driver hub
  404. [ 4.310957] usbcore: registered new device driver usb
  405. [ 4.319816] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  406. [ 4.326527] sata_mv 0000:01:00.0: enabling device (0146 -> 0147)
  407. [ 4.332815] sata_mv 0000:01:00.0: Gen-IIE 32 slots 4 ports SCSI mode IRQ via INTx
  408. [ 4.342219] ehci-orion: EHCI orion driver
  409. [ 4.344970] xhci_hcd 0000:02:00.0: xHCI Host Controller
  410. [ 4.346876] orion-ehci d0050000.usb: EHCI Host Controller
  411. [ 4.352092] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
  412. [ 4.357136] orion-ehci d0050000.usb: new USB bus registered, assigned bus number 2
  413. [ 4.372920] xhci_hcd 0000:02:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x0000001100000090
  414. [ 4.379700] orion-ehci d0050000.usb: irq 34, io mem 0xd0050000
  415. [ 4.384059] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
  416. [ 4.396296] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  417. [ 4.403558] usb usb1: Product: xHCI Host Controller
  418. [ 4.405319] orion-ehci d0050000.usb: USB 2.0 started, EHCI 1.00
  419. [ 4.408466] usb usb1: Manufacturer: Linux 5.10.0-1-armmp-lpae xhci-hcd
  420. [ 4.420977] usb usb1: SerialNumber: 0000:02:00.0
  421. [ 4.458420] hub 1-0:1.0: USB hub found
  422. [ 4.462293] hub 1-0:1.0: 2 ports detected
  423. [ 4.462657] scsi host0: sata_mv
  424. [ 4.467002] xhci_hcd 0000:02:00.0: xHCI Host Controller
  425. [ 4.472022] scsi host1: sata_mv
  426. [ 4.475662] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
  427. [ 4.480497] scsi host2: sata_mv
  428. [ 4.486317] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  429. [ 4.491125] scsi host3: sata_mv
  430. [ 4.496729] usb usb2: Product: EHCI Host Controller
  431. [ 4.496737] usb usb2: Manufacturer: Linux 5.10.0-1-armmp-lpae ehci_hcd
  432. [ 4.500204] ata1: SATA max UDMA/133 mmio m1048576@0xf8000000 port 0xf8022000 irq 58
  433. [ 4.504828] usb usb2: SerialNumber: d0050000.usb
  434. [ 4.507996] hub 2-0:1.0: USB hub found
  435. [ 4.511411] ata2: SATA max UDMA/133 mmio m1048576@0xf8000000 port 0xf8024000 irq 58
  436. [ 4.519152] hub 2-0:1.0: 1 port detected
  437. [ 4.523742] ata3: SATA max UDMA/133 mmio m1048576@0xf8000000 port 0xf8026000 irq 58
  438. [ 4.523750] ata4: SATA max UDMA/133 mmio m1048576@0xf8000000 port 0xf8028000 irq 58
  439. [ 4.529823] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
  440. [ 4.562272] orion-ehci d0051000.usb: EHCI Host Controller
  441. [ 4.567766] orion-ehci d0051000.usb: new USB bus registered, assigned bus number 4
  442. [ 4.575444] xhci_hcd 0000:02:00.0: Host supports USB 3.0 SuperSpeed
  443. [ 4.581952] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
  444. [ 4.582167] orion-ehci d0051000.usb: irq 35, io mem 0xd0051000
  445. [ 4.590284] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
  446. [ 4.604266] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  447. [ 4.611528] usb usb3: Product: xHCI Host Controller
  448. [ 4.613317] orion-ehci d0051000.usb: USB 2.0 started, EHCI 1.00
  449. [ 4.616434] usb usb3: Manufacturer: Linux 5.10.0-1-armmp-lpae xhci-hcd
  450. [ 4.628931] usb usb3: SerialNumber: 0000:02:00.0
  451. [ 4.634134] hub 3-0:1.0: USB hub found
  452. [ 4.638607] hub 3-0:1.0: 2 ports detected
  453. [ 4.643608] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
  454. [ 4.651927] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  455. [ 4.659205] usb usb4: Product: EHCI Host Controller
  456. [ 4.664116] usb usb4: Manufacturer: Linux 5.10.0-1-armmp-lpae ehci_hcd
  457. [ 4.670677] usb usb4: SerialNumber: d0051000.usb
  458. [ 4.675949] hub 4-0:1.0: USB hub found
  459. [ 4.679869] hub 4-0:1.0: 1 port detected
  460. [ 4.685104] orion-ehci d0052000.usb: EHCI Host Controller
  461. [ 4.690618] orion-ehci d0052000.usb: new USB bus registered, assigned bus number 5
  462. [ 4.698615] orion-ehci d0052000.usb: irq 41, io mem 0xd0052000
  463. [ 4.847811] ata1: SATA link down (SStatus 0 SControl 300)
  464. [ 5.167792] ata2: SATA link down (SStatus 0 SControl 300)
  465. [ 5.457345] orion-ehci d0052000.usb: USB 2.0 started, EHCI 1.00
  466. [ 5.463577] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
  467. [ 5.471884] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  468. [ 5.479147] usb usb5: Product: EHCI Host Controller
  469. [ 5.484055] usb usb5: Manufacturer: Linux 5.10.0-1-armmp-lpae ehci_hcd
  470. [ 5.487796] ata3: SATA link down (SStatus 0 SControl 300)
  471. [ 5.490617] usb usb5: SerialNumber: d0052000.usb
  472. [ 5.491220] hub 5-0:1.0: USB hub found
  473. [ 5.504524] hub 5-0:1.0: 1 port detected
  474. [ 5.569863] usb 3-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
  475. [ 5.589328] usb 4-1: new high-speed USB device number 2 using orion-ehci
  476. [ 5.600206] usb 3-1: New USB device found, idVendor=13fd, idProduct=3920, bcdDevice= 2.05
  477. [ 5.608446] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  478. [ 5.615627] usb 3-1: Product: External
  479. [ 5.619402] usb 3-1: Manufacturer: Generic
  480. [ 5.623611] usb 3-1: SerialNumber: 5A3635394352534954202020
  481. [ 5.643100] usb-storage 3-1:1.0: USB Mass Storage device detected
  482. [ 5.651153] scsi host4: usb-storage 3-1:1.0
  483. [ 5.655817] usbcore: registered new interface driver usb-storage
  484. [ 5.663802] usbcore: registered new interface driver uas
  485. [ 5.752024] usb 4-1: New USB device found, idVendor=090c, idProduct=1000, bcdDevice=10.00
  486. [ 5.760253] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  487. [ 5.767433] usb 4-1: SerialNumber: 14021150002524
  488. [ 5.772790] usb-storage 4-1:1.0: USB Mass Storage device detected
  489. [ 5.780147] scsi host5: usb-storage 4-1:1.0
  490. [ 5.821471] ata4: SATA link down (SStatus 0 SControl 300)
  491. Begin: Loading essential drivers ... [ 5.861367] usb 5-1: new full-speed USB device number 2 using orion-ehci
  492. [ 6.221311] raid6: int32x8 gen() 396 MB/s
  493. [ 6.293320] raid6: int32x8 xor() 255 MB/s
  494. [ 6.365306] raid6: int32x4 gen() 435 MB/s
  495. [ 6.437340] raid6: int32x4 xor() 261 MB/s
  496. [ 6.509320] raid6: int32x2 gen() 544 MB/s
  497. [ 6.581330] raid6: int32x2 xor() 289 MB/s
  498. [ 6.653350] raid6: int32x1 gen() 533 MB/s
  499. [ 6.725338] raid6: int32x1 xor() 253 MB/s
  500. [ 6.729632] raid6: using algorithm int32x2 gen() 544 MB/s
  501. [ 6.735056] raid6: .... xor() 289 MB/s, rmw enabled
  502. [ 6.739956] raid6: using intx1 recovery algorithm
  503. [ 6.777607] scsi 4:0:0:0: Direct-Access Generic External 0205 PQ: 0 ANSI: 6
  504. [ 6.790456] async_tx: api initialized (async)
  505. [ 6.795787] xor: measuring software checksum speed
  506. [ 6.808050] arm4regs : 1344 MB/sec
  507. [ 6.822433] 8regs : 985 MB/sec
  508. [ 6.835090] 32regs : 1190 MB/sec
  509. [ 6.839469] xor: using function: arm4regs (1344 MB/sec)
  510. [ 6.876738] usb 5-1: New USB device found, idVendor=041e, idProduct=30c4, bcdDevice= 1.00
  511. [ 6.884976] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=5
  512. [ 6.892188] usb 5-1: Product: Sound BlasterAxx SBX 8
  513. [ 6.897207] usb 5-1: Manufacturer: Creative Technology
  514. [ 6.902393] usb 5-1: SerialNumber: 017171109201221537
  515. [ 6.908480] sd 4:0:0:0: [sda] 1953525167 512-byte logical blocks: (1.00 TB/932 GiB)
  516. [ 6.920856] scsi 5:0:0:0: Direct-Access PQ: 0 ANSI: 4
  517. [ 6.962318] sd 4:0:0:0: [sda] Write Protect is off
  518. [ 6.968456] sd 5:0:0:0: [sdb] 15257600 512-byte logical blocks: (7.81 GB/7.28 GiB)
  519. [ 6.978130] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
  520. [ 7.016959] sd 5:0:0:0: [sdb] Write Protect is off
  521. [ 7.022816] sd 5:0:0:0: [sdb] No Caching mode page found
  522. [ 7.028233] sd 5:0:0:0: [sdb] Assuming drive cache: write through
  523. [ 7.053493] sdb: sdb1
  524. done.
  525. Begin: Running /scripts/init-p[ 7.063070] sd 5:0:0:0: [sdb] Attached SCSI removable disk
  526. remount ... done.
  527. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
  528. Begin: Running /scripts/local-premount ... [ 7.121130] random: fast init done
  529. [ 7.336814] sda: sda1 sda2 sda3
  530. [ 7.343891] sd 4:0:0:0: [sda] Attached SCSI disk
  531. [ 7.733551] md/raid1:md90: active with 1 out of 1 mirrors
  532. [ 7.739159] md90: detected capacity change from 0 to 536805376
  533. [ 7.748992] md/raid1:md91: active with 1 out of 1 mirrors
  534. [ 7.754644] md91: detected capacity change from 0 to 1073676288
  535. [ 7.768219] md/raid1:md92: active with 1 out of 1 mirrors
  536. [ 7.773783] md92: detected capacity change from 0 to 17180852224
  537. resume: invalid resume device: UUID=09e8988b-68a0-4186-8554-0798b8a98939
  538. done.
  539. Begin: Will now check root file system ... fsck from util-linux 2.36.1
  540. [/sbin/fsck.ext4 (1) -- /dev/md92] fsck.ext4 -a -C0 /dev/md92
  541. /dev/md92: clean, 40238/1050624 files, 640905/4194304 blocks
  542. done.
  543. [ 8.389983] EXT4-fs (md92): mounted filesystem with ordered data mode. Opts: (null)
  544. done.
  545. Begin: Running /scripts/local-bottom ... done.
  546. Begin: Running /scripts/init-bottom ... done.
  547. [ 8.698206] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
  548. [ 9.425594] systemd[1]: System time before build time, advancing clock.
  549. [ 9.523097] random: crng init done
  550. [ 9.621473] systemd[1]: Inserted module 'autofs4'
  551. [ 9.847504] systemd[1]: systemd 247.2-4 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
  552. [ 9.870630] systemd[1]: Detected architecture arm.
  553.  
  554. Welcome to Debian GNU/Linux bullseye/sid!
  555.  
  556. [ 9.951824] systemd[1]: Set hostname to <bawul>.
  557. [ 10.672430] systemd-sysv-generator[232]: SysV service '/etc/init.d/exim4' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
  558. [ 11.254362] systemd[1]: /lib/systemd/system/rpc-statd.service:16: PIDFile= references a path below legacy directory /var/run/, updating /var/run/rpc.statd.pid → /run/rpc.statd.pid; please update the unit file accordingly.
  559. [ 11.417186] systemd[1]: /lib/systemd/system/smartmontools.service:10: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
  560. [ 11.446608] systemd[1]: /etc/systemd/system/micon_boot.service:5: Unknown key name 'Restart' in section 'Unit', ignoring.
  561. [ 11.457666] systemd[1]: /etc/systemd/system/micon_boot.service:6: Unknown key name 'RestartSec' in section 'Unit', ignoring.
  562. [ 11.526644] systemd[1]: Queued start job for default target Graphical Interface.
  563. [ 11.539632] systemd[1]: Created slice system-getty.slice.
  564. [ OK ] Created slice system-getty.slice.
  565. [ 11.562897] systemd[1]: Created slice system-modprobe.slice.
  566. [ OK ] Created slice system-modprobe.slice.
  567. [ 11.586929] systemd[1]: Created slice system-serial\x2dgetty.slice.
  568. [ OK ] Created slice system-serial\x2dgetty.slice.
  569. [ 11.610728] systemd[1]: Created slice system-systemd\x2dfsck.slice.
  570. [ OK ] Created slice system-systemd\x2dfsck.slice.
  571. [ 11.634537] systemd[1]: Created slice User and Session Slice.
  572. [ OK ] Created slice User and Session Slice.
  573. [ 11.657739] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  574. [ OK ] Started Dispatch Password …ts to Console Directory Watch.
  575. [ 11.681684] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  576. [ OK ] Started Forward Password R…uests to Wall Directory Watch.
  577. [ 11.706272] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  578. [ OK ] Set up automount Arbitrary…s File System Automount Point.
  579. [ 11.733769] systemd[1]: Reached target Local Encrypted Volumes.
  580. [ OK ] Reached target Local Encrypted Volumes.
  581. [ 11.757850] systemd[1]: Reached target Paths.
  582. [ OK ] Reached target Paths.
  583. [ 11.777649] systemd[1]: Reached target Slices.
  584. [ OK ] Reached target Slices.
  585. [ 11.840729] systemd[1]: Listening on RPCbind Server Activation Socket.
  586. [ OK ] Listening on RPCbind Server Activation Socket.
  587. [ 11.862175] systemd[1]: Listening on Syslog Socket.
  588. [ OK ] Listening on Syslog Socket.
  589. [ 11.882011] systemd[1]: Listening on fsck to fsckd communication Socket.
  590. [ OK ] Listening on fsck to fsckd communication Socket.
  591. [ 11.905733] systemd[1]: Listening on initctl Compatibility Named Pipe.
  592. [ OK ] Listening on initctl Compatibility Named Pipe.
  593. [ 11.930431] systemd[1]: Listening on Journal Audit Socket.
  594. [ OK ] Listening on Journal Audit Socket.
  595. [ 11.953976] systemd[1]: Listening on Journal Socket (/dev/log).
  596. [ OK ] Listening on Journal Socket (/dev/log).
  597. [ 11.978121] systemd[1]: Listening on Journal Socket.
  598. [ OK ] Listening on Journal Socket.
  599. [ 12.021897] systemd[1]: Listening on udev Control Socket.
  600. [ OK ] Listening on udev Control Socket.
  601. [ 12.041977] systemd[1]: Listening on udev Kernel Socket.
  602. [ OK ] Listening on udev Kernel Socket.
  603. [ 12.065853] systemd[1]: Mounting Huge Pages File System...
  604. Mounting Huge Pages File System...
  605. [ 12.089829] systemd[1]: Mounting POSIX Message Queue File System...
  606. Mounting POSIX Message Queue File System...
  607. [ 12.117541] systemd[1]: Mounting NFSD configuration filesystem...
  608. Mounting NFSD configuration filesystem...
  609. [ 12.142288] systemd[1]: Mounting RPC Pipe File System...
  610. Mounting RPC Pipe File System...
  611. [ 12.173150] systemd[1]: Mounting Kernel Debug File System...
  612. Mounting Kernel Debug File System...
  613. [ 12.202680] systemd[1]: Mounting Kernel Trace File System...
  614. Mounting Kernel Trace File System...
  615. [ 12.225827] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
  616. [ 12.242667] systemd[1]: Starting Create list of static device nodes for the current kernel...
  617. Starting Create list of st…odes for the current kernel...
  618. [ 12.278270] systemd[1]: Starting Load Kernel Module configfs...
  619. Starting Load Kernel Module configfs...
  620. [ 12.298045] systemd[1]: Starting Load Kernel Module drm...
  621. Starting Load Kernel Mo[ 12.310390] RPC: Registered named UNIX socket transport module.
  622. dule drm...[ 12.317812] RPC: Registered udp transport module.
  623.  
  624. [ 12.323879] RPC: Registered tcp transport module.
  625. [ 12.328666] RPC: Registered tcp NFSv4.1 backchannel transport module.
  626. [ 12.347805] systemd[1]: Starting Load Kernel Module fuse...
  627. Starting Load Kernel Module fuse...
  628. [ 12.521671] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
  629. [ 12.531480] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
  630. [ 12.550504] systemd[1]: Starting Journal Service...
  631. Starting Journal Service...
  632. [ 12.562419] fuse: init (API version 7.32)
  633. [ 12.625645] systemd[1]: Starting Load Kernel Modules...
  634. Starting Load Kernel Modules...
  635. [ 12.651342] Installing knfsd (copyright (C) 1996 [email protected]).
  636. [ 12.656351] systemd[1]: Starting Remount Root and Kernel File Systems...
  637. Starting Remount Root and Kernel File Systems...
  638. [ 12.722371] systemd[1]: Starting Coldplug All udev Devices...
  639. Starting Coldplug All udev Devices...
  640. [ 12.770575] systemd[1]: Mounted Huge Pages File System.
  641. [ OK ] Mounted Huge Pages File System.
  642. [ 12.826186] systemd[1]: Mounted POSIX Message Queue File System.
  643. [ OK ] Mounted POSIX Message Queue File System.
  644. [ 12.850101] systemd[1]: Mounted NFSD configuration filesystem.
  645. [ OK ] Mounted NFSD configuration filesystem.
  646. [ 12.878041] systemd[1]: Mounted RPC Pipe File System.
  647. [ OK 12.884261] EXT4-fs (md92): re-mounted. Opts: errors=remount-ro
  648. m] Mounted RPC Pipe File System.
  649. [ 12.911294] systemd[1]: Mounted Kernel Debug File System.
  650. [ OK ] Mounted Kernel Debug File System.
  651. [ 12.958146] systemd[1]: Mounted Kernel Trace File System.
  652. [ OK ] Mounted Kernel Trace File System.
  653. [ 12.983235] systemd[1]: Finished Create list of static device nodes for the current kernel.
  654. [ OK ] Finished Create list of st… nodes for the current kernel.
  655. [ 13.035369] systemd[1]: [email protected]: Succeeded.
  656. [ 13.046583] systemd[1]: Finished Load Kernel Module configfs.
  657. [ OK ] Finished Load Kernel Module configfs.
  658. [ 13.075043] systemd[1]: [email protected]: Succeeded.
  659. [ 13.086647] systemd[1]: Finished Load Kernel Module drm.
  660. [ OK ] Finished Load Kernel Module drm.
  661. [ 13.115012] systemd[1]: [email protected]: Succeeded.
  662. [ 13.121948] systemd[1]: Finished Load Kernel Module fuse.
  663. [ OK ] Finished Load Kernel Module fuse.
  664. [ 13.143261] systemd[1]: Finished Load Kernel Modules.
  665. [ OK ] Finished Load Kernel Modules.
  666. [ 13.163311] systemd[1]: Finished Remount Root and Kernel File Systems.
  667. [ OK ] Finished Remount Root and Kernel File Systems.
  668. [ 13.207754] systemd[1]: Mounting FUSE Control File System...
  669. Mounting FUSE Control File System...
  670. [ 13.241735] systemd[1]: Mounting Kernel Configuration File System...
  671. Mounting Kernel Configuration File System...
  672. [ 13.273233] systemd[1]: Starting pNFS block layout mapping daemon...
  673. Starting pNFS block layout mapping daemon...
  674. [ 13.332792] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
  675. [ 13.345798] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
  676. [ 13.373649] systemd[1]: Starting Load/Save Random Seed...
  677. Starting Load/Save Random Seed...
  678. [ 13.398044] systemd[1]: Starting Apply Kernel Variables...
  679. Starting Apply Kernel Variables...
  680. [ 13.426090] systemd[1]: Starting Create System Users...
  681. Starting Create System Users...
  682. [ 13.470159] systemd[1]: Mounted FUSE Control File System.
  683. [ OK ] Mounted FUSE Control File System.
  684. [ 13.493998] systemd[1]: Started Journal Service.
  685. [ OK ] Started Journal Service.
  686. [ OK ] Finished Coldplug All udev Devices.
  687. [ OK ] Mounted Kernel Configuration File System.
  688. [ OK ] Started pNFS block layout mapping daemon.
  689. [ OK ] Finished Load/Save Random Seed.
  690. [ OK ] Finished Apply Kernel Variables.
  691. Starting Helper to synchronize boot up for ifupdown...
  692. Starting Flush Journal to Persistent Storage...
  693. [ OK ] Finished Create System Users.
  694. Starting Create Static Device Nodes in /dev...
  695. [ OK ] Finished Helper to synchronize boot up for ifupdown.
  696. [ OK ] Finished Create Static Device Nodes in /dev.
  697. [ OK ] Reached target Local File Systems (Pre).
  698. Starting Rule-based Manage…for Device Events and Files...
  699. [ OK ] Finished Flush Journal to Persistent Storage.
  700. [ OK ] Started Rule-based Manager for Device Events and Files.
  701. [ 15.049232] debugfs: Directory 'cpu1' with parent 'opp' already present!
  702. [ OK ] Found device /dev/ttyS0.
  703. [ 15.433291] orion_wdt: Initial timeout 171 sec
  704. [ 15.509901] libphy: orion_mdio_bus: probed
  705. [ 15.694825] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xdc
  706. [ 15.701236] nand: Hynix H27U4G8F2DTR-BC
  707. [ 15.705145] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
  708. [ 15.729065] Bad block table found at page 262080, version 0x01
  709. [ 15.737166] Bad block table found at page 262016, version 0x01
  710. [ 15.777742] nand_read_bbt: bad block at 0x000000040000
  711. [ 15.782991] nand_read_bbt: bad block at 0x000000060000
  712. [ 15.788175] nand_read_bbt: bad block at 0x000001240000
  713. [ 15.793393] nand_read_bbt: bad block at 0x000001260000
  714. [ 15.798570] nand_read_bbt: bad block at 0x000002080000
  715. [ 15.803754] nand_read_bbt: bad block at 0x0000020a0000
  716. [ 15.808939] nand_read_bbt: bad block at 0x0000023c0000
  717. [ 15.814114] nand_read_bbt: bad block at 0x0000024c0000
  718. [ 15.819288] nand_read_bbt: bad block at 0x0000024e0000
  719. [ 15.824460] nand_read_bbt: bad block at 0x000002bc0000
  720. [ 15.829632] nand_read_bbt: bad block at 0x000002be0000
  721. [ 15.834804] nand_read_bbt: bad block at 0x000003340000
  722. [ 15.839976] nand_read_bbt: bad block at 0x000003360000
  723. [ 15.845154] nand_read_bbt: bad block at 0x00000ba80000
  724. [ 15.850328] nand_read_bbt: bad block at 0x00000baa0000
  725. [ 15.855517] nand_read_bbt: bad block at 0x00000dfe0000
  726. [ 15.860715] nand_read_bbt: bad block at 0x000017fc0000
  727. [ 15.865904] nand_read_bbt: bad block at 0x000017fe0000
  728. [ 15.871084] nand_read_bbt: bad block at 0x00001d540000
  729. [ 15.876263] nand_read_bbt: bad block at 0x00001d560000
  730. [ 15.881441] nand_read_bbt: bad block at 0x00001e5c0000
  731. [ 15.886615] nand_read_bbt: bad block at 0x00001e5e0000
  732. [ 15.891792] nand_read_bbt: bad block at 0x00001e700000
  733. [ 15.896970] nand_read_bbt: bad block at 0x00001e720000
  734. [ 15.902144] nand_read_bbt: bad block at 0x00001f000000
  735. [ 15.907322] nand_read_bbt: bad block at 0x00001f020000
  736. [ 15.912501] nand_read_bbt: bad block at 0x00001f680000
  737. [ 15.917680] nand_read_bbt: bad block at 0x00001f6a0000
  738. [ 15.922868] nand_read_bbt: bad block at 0x00001f940000
  739. [ 15.928066] nand_read_bbt: bad block at 0x00001f960000
  740. [ 15.954715] mvneta d0070000.ethernet eth0: Using random mac address 22:61:50:cd:0f:af
  741. [ 15.996557] mvneta d0074000.ethernet eth1: Using random mac address 52:de:fb:9c:4b:ea
  742. [ 16.067129] hid: raw HID events driver (C) Jiri Kosina
  743. [ 16.142250] 1 fixed-partitions partitions found on MTD device pxa3xx_nand-0
  744. [ 16.149279] Creating 1 MTD partitions on "pxa3xx_nand-0":
  745. [ 16.157679] 0x000000000000-0x000020000000 : "ubifs"
  746. [ 16.172593] sd 4:0:0:0: Attached scsi generic sg0 type 0
  747. [ 16.215429] sd 5:0:0:0: Attached scsi generic sg1 type 0
  748. [ 16.326223] usbcore: registered new interface driver usbhid
  749. [ 16.331901] usbhid: USB HID core driver
  750. [ 16.836039] input: Creative Technology Sound BlasterAxx SBX 8 as /devices/platform/soc/soc:internal-regs/d0052000.usb/usb5/5-1/5-1:1.3/0003:041E:30C4.0001/input/input1
  751. [ OK ] Started MD array monitor.
  752. [ 16.929773] hid-generic 0003:041E:30C4.0001: input,hidraw0: USB HID v1.00 Device [Creative Technology Sound BlasterAxx SBX 8] on usb-d0052000.usb-1/input3
  753. [ 17.042703] usbcore: registered new interface driver snd-usb-audio
  754. [ OK ] Found device /sys/subsystem/net/devices/eth0.
  755. [ OK ] Found device /dev/disk/by-…2-5105-404c-80a3-83cf60e634e9.
  756. [ OK ] Found device /dev/disk/by-…b-68a0-4186-8554-0798b8a98939.
  757. Activating swap /dev/disk/…68a0-4186-8554-0798b8a98939...
  758. Starting File System Check…5105-404c-80a3-83cf60e634e9...
  759. [ 17.589361] Adding 1048508k swap on /dev/md91. Priority:-2 extents:1 across:1048508k FS
  760. [ OK ] Activated swap /dev/disk/b…b-68a0-4186-8554-0798b8a98939.
  761. [ OK ] Reached target Swap.
  762. [ OK ] Started File System Check Daemon to report status.
  763. [ OK ] Finished File System Check…2-5105-404c-80a3-83cf60e634e9.
  764. Mounting /boot...
  765. [ 17.985105] EXT4-fs (md90): mounting ext3 file system using the ext4 subsystem
  766. [ 18.100164] EXT4-fs (md90): mounted filesystem with ordered data mode. Opts: (null)
  767. [ 18.107913] ext3 filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff)
  768. [ OK ] Mounted /boot.
  769. [ OK ] Reached target Local File Systems.
  770. Starting Load AppArmor profiles...
  771. Starting Preprocess NFS configuration...
  772. Starting Create Volatile Files and Directories...
  773. [ OK ] Finished Preprocess NFS configuration.
  774. Starting NFSv4 ID-name mapping service...
  775. [ OK ] Reached target NFS client services.
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!