Guest User

Untitled

a guest
Jan 11th, 2024
35
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 131.50 KB | None | 0 0
  1. U-Boot SPL 2014.01-rc1-02133-geccc92d (Jan 11 2014 - 09:46:16)
  2. Board: Cubieboard2
  3. DRAM: 512 MiB
  4. CPU: 960000000Hz, AXI/AHB/APB: 3/2/2
  5. spl: not an uImage at 1600
  6.  
  7.  
  8. U-Boot 2014.01-rc1-02133-geccc92d (Jan 11 2014 - 09:46:16) Allwinner Technology
  9.  
  10. CPU: Allwinner A20 (SUN7I)
  11. Board: Cubieboard2
  12. I2C: ready
  13. DRAM: 512 MiB
  14. WARNING: Caches not enabled
  15. MMC: SUNXI SD/MMC: 0
  16. *** Warning - bad CRC, using default environment
  17.  
  18. In: serial
  19. Out: serial
  20. Err: serial
  21. Net: mii0
  22. Warning: failed to set MAC address
  23.  
  24. Hit any key to stop autoboot: 0
  25. ** Unrecognized filesystem type **
  26. ** File not found boot/uEnv.txt **
  27. 150 bytes read in 3 ms (48.8 KiB/s)
  28. Loaded environment from uEnv.txt
  29. ** Unrecognized filesystem type **
  30. ** File not found boot/boot.scr **
  31. ** File not found boot.scr **
  32. ** File not found /boot/script.bin **
  33. ** Unrecognized filesystem type **
  34. 46620 bytes read in 6 ms (7.4 MiB/s)
  35. 4682816 bytes read in 253 ms (17.7 MiB/s)
  36. ## Booting kernel from Legacy Image at 48000000 ...
  37. Image Name: Linux-3.4.79
  38. Created: 2017-11-13 8:55:18 UTC
  39. Image Type: ARM Linux Kernel Image (uncompressed)
  40. Data Size: 4682752 Bytes = 4.5 MiB
  41. Load Address: 40008000
  42. Entry Point: 40008000
  43. Verifying Checksum ... OK
  44. Loading Kernel Image ... OK
  45.  
  46. Starting kernel ...
  47.  
  48. <6>Booting Linux on physical CPU 0
  49. <6>Initializing cgroup subsys cpuset
  50. <6>Initializing cgroup subsys cpu
  51. <5>Linux version 3.4.79 (xdr@ubuntu12) (gcc version 4.6.3 20120201 (prerelease)7
  52. CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
  53. CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  54. Machine: sun7i
  55. <6>Memory Reserved:
  56. <6> SYS : 0x43000000 - 0x4300ffff ( 64 kB)
  57. <6> G2D : 0x50000000 - 0x50ffffff ( 16 MB)
  58. <6> LCD : 0x51000000 - 0x52ffffff ( 32 MB)
  59. <6>cma: CMA: reserved 192 MiB at 43c00000
  60. Memory policy: ECC disabled, Data cache writealloc
  61. <6>sunxi: Allwinner A20 (AW1651/sun7i) detected.
  62. <7>On node 0 totalpages: 131072
  63. <7>free_area_init_node: node 0, pgdat c09ad7c0, node_mem_map d3000000
  64. <7> DMA zone: 512 pages used for memmap
  65. <7> DMA zone: 0 pages reserved
  66. <7> DMA zone: 65024 pages, LIFO batch:15
  67. <7> Normal zone: 512 pages used for memmap
  68. <7> Normal zone: 65024 pages, LIFO batch:15
  69. <6>PERCPU: Embedded 7 pages/cpu @d3405000 s7232 r8192 d13248 u32768
  70. <7>pcpu-alloc: s7232 r8192 d13248 u32768 alloc=8*4096<c>
  71. <7>pcpu-alloc: <c>[0] <c>0 <c>[0] <c>1 <c>
  72. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
  73. <5>Kernel command line: console=ttyS0,115200 root=/dev/sdc2 loglevel=8 panic=10d
  74. <6>PID hash table entries: 2048 (order: 1, 8192 bytes)
  75. <6>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  76. <6>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  77. <6>allocated 1048576 bytes of page_cgroup
  78. <6>please try 'cgroup_disable=memory' option if you don't want memory cgroups
  79. <6>Memory: 512MB = 512MB total
  80. <5>Memory: 260632k/260632k available, 263656k reserved, 0K highmem
  81. <5>Virtual kernel memory layout:
  82. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  83. fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  84. vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
  85. lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
  86. pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  87. modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  88. .text : 0xc0008000 - 0xc08169a4 (8251 kB)
  89. .init : 0xc0817000 - 0xc0945c40 (1212 kB)
  90. .data : 0xc0946000 - 0xc09b4a28 ( 443 kB)
  91. .bss : 0xc09b4a4c - 0xc0b8b828 (1884 kB)
  92. <6>SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  93. <6>Preemptible hierarchical RCU implementation.
  94. <6> RCU dyntick-idle grace-period acceleration is enabled.
  95. <6> Additional per-CPU info printed with stalls.
  96. <6>NR_IRQS:192
  97. <6>Architected local timer running at 24.00MHz.
  98. <6>sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  99. <2>start_kernel(): bug: interrupts were enabled early
  100. <6>Console: colour dummy device 80x30
  101. <6>console [tty0] enabled
  102. <6>Calibrating delay loop... <c>1915.28 BogoMIPS (lpj=9576448)
  103. <6>pid_max: default: 32768 minimum: 301
  104. <6>Mount-cache hash table entries: 512
  105. <6>Initializing cgroup subsys cpuacct
  106. <6>Initializing cgroup subsys memory
  107. <6>Initializing cgroup subsys devices
  108. <6>Initializing cgroup subsys freezer
  109. <6>Initializing cgroup subsys blkio
  110. <6>Initializing cgroup subsys perf_event
  111. <6>CPU: Testing write buffer coherency: ok
  112. <6>CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  113. <6>hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
  114. <6>Setting up static identity map for 0x405b0118 - 0x405b0170
  115. CPU1: Booted secondary processor
  116. <6>CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  117. <6>Brought up 2 CPUs
  118. <6>SMP: Total of 2 processors activated (3830.57 BogoMIPS).
  119. <6>devtmpfs: initialized
  120. <6>dummy:
  121. <6>NET: Registered protocol family 16
  122. <6>DMA: preallocated 256 KiB pool for atomic coherent allocations
  123. <6>hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  124. <6>hw-breakpoint: maximum watchpoint size is 8 bytes.
  125. <6>[ccu-inf] aw clock manager init
  126. <6>[ccu-inf] aw_ccu_init
  127. <6>[ccu-inf] script config pll3 to 297MHz
  128. <6>[ccu-inf] script config pll4 to 300MHz
  129. <6>[ccu-inf] script config pll6 to 600MHz
  130. <6>[ccu-inf] script config pll7 to 297MHz
  131. <6>[ccu-inf] script config pll8 to 336MHz
  132. <6>Init eGon pin module V2.0
  133. <6>bio: create slab <bio-0> at 0
  134. <5>SCSI subsystem initialized
  135. <7>libata version 3.00 loaded.
  136. <6>usbcore: registered new interface driver usbfs
  137. <6>usbcore: registered new interface driver hub
  138. <6>usbcore: registered new device driver usb
  139. <6>Linux media interface: v0.10
  140. <6>Linux video capture interface: v2.00
  141. <6>Advanced Linux Sound Architecture Driver Version 1.0.25.
  142. <6>cfg80211: Calling CRDA to update world regulatory domain
  143. <6>Switching to clocksource arch_sys_counter
  144. <5>FS-Cache: Loaded
  145. <6>CacheFiles: Loaded
  146. <6>sw_hcd_host0 sw_hcd_host0: sw_hcd host driver
  147. <6>sw_hcd_host0 sw_hcd_host0: new USB bus registered, assigned bus number 1
  148. <6>hub 1-0:1.0: USB hub found
  149. <6>hub 1-0:1.0: 1 port detected
  150. config i2c gpio with gpio_config api
  151. <6>axp_mfd 0-0034: AXP (CHIP ID: 0x41) detected
  152. [AXP]axp driver uning configuration failed(342)
  153. [AXP]power_start = 0
  154. <6>I2C: i2c-0: AW16XX I2C adapter
  155. <6>I2C: i2c-1: AW16XX I2C adapter
  156. <6>NET: Registered protocol family 2
  157. <6>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  158. <6>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  159. <6>TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
  160. <6>TCP: Hash tables configured (established 16384 bind 16384)
  161. <6>TCP: reno registered
  162. <6>UDP hash table entries: 256 (order: 1, 8192 bytes)
  163. <6>UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  164. <6>NET: Registered protocol family 1
  165. <6>RPC: Registered named UNIX socket transport module.
  166. <6>RPC: Registered udp transport module.
  167. <6>RPC: Registered tcp transport module.
  168. <6>RPC: Registered tcp NFSv4.1 backchannel transport module.
  169. pm: select wifi: rtl8192cu
  170. <4>wifi_pm: Unsupported wifi type!
  171. [wifi_pm]: wifi gpio init is OK !!
  172. <6>[PM] bt is disable at script fex
  173. <6>audit: initializing netlink socket (disabled)
  174. <5>type=2000 audit(0.570:1): initialized
  175. <5>VFS: Disk quotas dquot_6.5.2
  176. Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  177. <6>exFAT: Version 1.2.9
  178. <5>NFS: Registering the id_resolver key type
  179. <6>NTFS driver 2.1.30 [Flags: R/W].
  180. <6>fuse init (API version 7.18)
  181. <6>msgmni has been set to 893
  182. <3>alg: comp: Compression test 1 failed for lzo-generic: output len = 57
  183. <6>alg: No test for stdrng (krng)
  184. <6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  185. <6>io scheduler noop registered
  186. <6>io scheduler deadline registered
  187. <6>io scheduler cfq registered (default)
  188. <6>sunxi disp driver loaded (/dev/disp api 1.0)
  189. <6>Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
  190. <6>[uart]: used uart info.: 0x19
  191. <6>[uart]: serial probe 0 irq 33 mapbase 0x01c28000
  192. <6>sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 33) is a U6_16550A
  193. Booting Linux on physical CPU 0
  194. Initializing cgroup subsys cpuset
  195. Initializing cgroup subsys cpu
  196. Linux version 3.4.79 (xdr@ubuntu12) (gcc version 4.6.3 20120201 (prerelease) (c7
  197. CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
  198. CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  199. Machine: sun7i
  200. Memory Reserved:
  201. SYS : 0x43000000 - 0x4300ffff ( 64 kB)
  202. G2D : 0x50000000 - 0x50ffffff ( 16 MB)
  203. LCD : 0x51000000 - 0x52ffffff ( 32 MB)
  204. cma: CMA: reserved 192 MiB at 43c00000
  205. Memory policy: ECC disabled, Data cache writealloc
  206. sunxi: Allwinner A20 (AW1651/sun7i) detected.
  207. On node 0 totalpages: 131072
  208. free_area_init_node: node 0, pgdat c09ad7c0, node_mem_map d3000000
  209. DMA zone: 512 pages used for memmap
  210. DMA zone: 0 pages reserved
  211. DMA zone: 65024 pages, LIFO batch:15
  212. Normal zone: 512 pages used for memmap
  213. Normal zone: 65024 pages, LIFO batch:15
  214. PERCPU: Embedded 7 pages/cpu @d3405000 s7232 r8192 d13248 u32768
  215. pcpu-alloc: s7232 r8192 d13248 u32768 alloc=8*4096
  216. pcpu-alloc: [0] 0 [0] 1
  217. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
  218. Kernel command line: console=ttyS0,115200 root=/dev/sdc2 loglevel=8 panic=10 cod
  219. PID hash table entries: 2048 (order: 1, 8192 bytes)
  220. Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  221. Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  222. allocated 1048576 bytes of page_cgroup
  223. please try 'cgroup_disable=memory' option if you don't want memory cgroups
  224. Memory: 512MB = 512MB total
  225. Memory: 260632k/260632k available, 263656k reserved, 0K highmem
  226. Virtual kernel memory layout:
  227. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  228. fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  229. vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
  230. lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
  231. pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  232. modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  233. .text : 0xc0008000 - 0xc08169a4 (8251 kB)
  234. .init : 0xc0817000 - 0xc0945c40 (1212 kB)
  235. .data : 0xc0946000 - 0xc09b4a28 ( 443 kB)
  236. .bss : 0xc09b4a4c - 0xc0b8b828 (1884 kB)
  237. SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  238. Preemptible hierarchical RCU implementation.
  239. RCU dyntick-idle grace-period acceleration is enabled.
  240. Additional per-CPU info printed with stalls.
  241. NR_IRQS:192
  242. Architected local timer running at 24.00MHz.
  243. sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  244. start_kernel(): bug: interrupts were enabled early
  245. Console: colour dummy device 80x30
  246. console [tty0] enabled
  247. Calibrating delay loop... 1915.28 BogoMIPS (lpj=9576448)
  248. pid_max: default: 32768 minimum: 301
  249. Mount-cache hash table entries: 512
  250. Initializing cgroup subsys cpuacct
  251. Initializing cgroup subsys memory
  252. Initializing cgroup subsys devices
  253. Initializing cgroup subsys freezer
  254. Initializing cgroup subsys blkio
  255. Initializing cgroup subsys perf_event
  256. CPU: Testing write buffer coherency: ok
  257. CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  258. hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
  259. Setting up static identity map for 0x405b0118 - 0x405b0170
  260. CPU1: Booted secondary processor
  261. CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  262. Brought up 2 CPUs
  263. SMP: Total of 2 processors activated (3830.57 BogoMIPS).
  264. devtmpfs: initialized
  265. dummy:
  266. NET: Registered protocol family 16
  267. DMA: preallocated 256 KiB pool for atomic coherent allocations
  268. hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  269. hw-breakpoint: maximum watchpoint size is 8 bytes.
  270. [ccu-inf] aw clock manager init
  271. [ccu-inf] aw_ccu_init
  272. [ccu-inf] script config pll3 to 297MHz
  273. [ccu-inf] script config pll4 to 300MHz
  274. [ccu-inf] script config pll6 to 600MHz
  275. [ccu-inf] script config pll7 to 297MHz
  276. [ccu-inf] script config pll8 to 336MHz
  277. Init eGon pin module V2.0
  278. bio: create slab <bio-0> at 0
  279. SCSI subsystem initialized
  280. libata version 3.00 loaded.
  281. usbcore: registered new interface driver usbfs
  282. usbcore: registered new interface driver hub
  283. usbcore: registered new device driver usb
  284. Linux media interface: v0.10
  285. Linux video capture interface: v2.00
  286. Advanced Linux Sound Architecture Driver Version 1.0.25.
  287. cfg80211: Calling CRDA to update world regulatory domain
  288. Switching to clocksource arch_sys_counter
  289. FS-Cache: Loaded
  290. CacheFiles: Loaded
  291. sw_hcd_host0 sw_hcd_host0: sw_hcd host driver
  292. sw_hcd_host0 sw_hcd_host0: new USB bus registered, assigned bus number 1
  293. hub 1-0:1.0: USB hub found
  294. hub 1-0:1.0: 1 port detected
  295. config i2c gpio with gpio_config api
  296. axp_mfd 0-0034: AXP (CHIP ID: 0x41) detected
  297. [AXP]axp driver uning configuration failed(342)
  298. [AXP]power_start = 0
  299. I2C: i2c-0: AW16XX I2C adapter
  300. I2C: i2c-1: AW16XX I2C adapter
  301. NET: Registered protocol family 2
  302. IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  303. TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  304. TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
  305. TCP: Hash tables configured (established 16384 bind 16384)
  306. TCP: reno registered
  307. UDP hash table entries: 256 (order: 1, 8192 bytes)
  308. UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  309. NET: Registered protocol family 1
  310. RPC: Registered named UNIX socket transport module.
  311. RPC: Registered udp transport module.
  312. RPC: Registered tcp transport module.
  313. RPC: Registered tcp NFSv4.1 backchannel transport module.
  314. pm: select wifi: rtl8192cu
  315. wifi_pm: Unsupported wifi type!
  316. [wifi_pm]: wifi gpio init is OK !!
  317. [PM] bt is disable at script fex
  318. audit: initializing netlink socket (disabled)
  319. type=2000 audit(0.570:1): initialized
  320. VFS: Disk quotas dquot_6.5.2
  321. Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  322. exFAT: Version 1.2.9
  323. NFS: Registering the id_resolver key type
  324. NTFS driver 2.1.30 [Flags: R/W].
  325. fuse init (API version 7.18)
  326. msgmni has been set to 893
  327. alg: comp: Compression test 1 failed for lzo-generic: output len = 57
  328. alg: No test for stdrng (krng)
  329. Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  330. io scheduler noop registered
  331. io scheduler deadline registered
  332. io scheduler cfq registered (default)
  333. sunxi disp driver loaded (/dev/disp api 1.0)
  334. Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
  335. [uart]: used uart info.: 0x19
  336. [uart]: serial probe 0 irq 33 mapbase 0x01c28000
  337. sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 33) is a U6_16550A
  338. <6>console [ttyS0] enabled
  339. console [ttyS0] enabled
  340. <6>[uart]: serial probe 3 irq 36 mapbase 0x01c28c00
  341. [uart]: serial probe 3 irq 36 mapbase 0x01c28c00
  342. <6>sunxi-uart.3: ttyS1 at MMIO 0x1c28c00 (irq = 36) is a U6_16550A
  343. sunxi-uart.3: ttyS1 at MMIO 0x1c28c00 (irq = 36) is a U6_16550A
  344. <6>[uart]: serial probe 4 irq 49 mapbase 0x01c29000
  345. [uart]: serial probe 4 irq 49 mapbase 0x01c29000
  346. <6>sunxi-uart.4: ttyS2 at MMIO 0x1c29000 (irq = 49) is a U6_16550A
  347. sunxi-uart.4: ttyS2 at MMIO 0x1c29000 (irq = 49) is a U6_16550A
  348. <7>G2D: drv_g2d_init
  349. G2D: drv_g2d_init
  350. <6>G2D: g2dmem: g2d_start=50000000, g2d_size=1000000
  351. G2D: g2dmem: g2d_start=50000000, g2d_size=1000000
  352. <6>G2D: head:d0000000,tail:d1000000
  353. G2D: head:d0000000,tail:d1000000
  354. <6>G2D: Module initialized.major:250
  355. G2D: Module initialized.major:250
  356. <6>brd: module loaded
  357. brd: module loaded
  358. <6>loop: module loaded
  359. loop: module loaded
  360. nand driver is disabled
  361. nand driver is disabled
  362. SATA AHCI Phy Power Failed!!
  363. SATA AHCI Phy Power Failed!!
  364. SATA AHCI Phy Calibration Failed!!
  365. SATA AHCI Phy Calibration Failed!!
  366. <6>sw_ahci sw_ahci.0: controller can't do PMP, turning off CAP_PMP
  367. sw_ahci sw_ahci.0: controller can't do PMP, turning off CAP_PMP
  368. <4>sw_ahci sw_ahci.0: forcing PORTS_IMPL to 0x1
  369. sw_ahci sw_ahci.0: forcing PORTS_IMPL to 0x1
  370. <6>sw_ahci sw_ahci.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform e
  371. sw_ahci sw_ahci.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
  372. <6>sw_ahci sw_ahci.0: flags: ncq sntf pm led clo only pio slum part ccc
  373. sw_ahci sw_ahci.0: flags: ncq sntf pm led clo only pio slum part ccc
  374. <6>scsi0 : sw_ahci_platform
  375. scsi0 : sw_ahci_platform
  376. <6>ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88
  377. ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88
  378. <6>sunxi_emac Using mii phy on PortA
  379. sunxi_emac Using mii phy on PortA
  380. <6>sunxi_emac Using MAC from SID: 02:45:04:82:9e:45sunxi_emac Using MAC from SI2
  381.  
  382. PPP generic driver version 2.4.2
  383. <6>PPP BSD Compression module registered
  384. PPP BSD Compression module registered
  385. <6>PPP Deflate Compression module registered
  386. PPP Deflate Compression module registered
  387. <6>PPP MPPE Compression module registered
  388. PPP MPPE Compression module registered
  389. <6>NET: Registered protocol family 24
  390. NET: Registered protocol family 24
  391. <6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  392. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  393. <6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  394. ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  395. [sw-ehci1]: open clock
  396. [sw-ehci1]: open clock
  397. [sw-ehci1]: Set USB Power ON
  398. [sw-ehci1]: Set USB Power ON
  399. <6>sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  400. sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  401. <6>sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 2
  402. sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 2
  403. <6>sw-ehci sw-ehci.1: irq 71, io mem 0x01c14000
  404. sw-ehci sw-ehci.1: irq 71, io mem 0x01c14000
  405. <6>sw-ehci sw-ehci.1: USB 2.0 started, EHCI 1.00
  406. sw-ehci sw-ehci.1: USB 2.0 started, EHCI 1.00
  407. ehci_irq: port change detect
  408. ehci_irq: port change detect
  409. <6>hub 2-0:1.0: USB hub found
  410. hub 2-0:1.0: USB hub found
  411. <6>hub 2-0:1.0: 1 port detected
  412. hub 2-0:1.0: 1 port detected
  413. [sw-ohci1]: open clock
  414. [sw-ohci1]: open clock
  415. <6>sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
  416. sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
  417. <6>sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 3
  418. sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 3
  419. <6>sw-ohci sw-ohci.1: irq 96, io mem 0x01c14400
  420. sw-ohci sw-ohci.1: irq 96, io mem 0x01c14400
  421. <6>hub 3-0:1.0: USB hub found
  422. hub 3-0:1.0: USB hub found
  423. <6>hub 3-0:1.0: 1 port detected
  424. hub 3-0:1.0: 1 port detected
  425. [sw-ehci2]: open clock
  426. [sw-ehci2]: open clock
  427. <6>ata1: SATA link down (SStatus 0 SControl 300)
  428. [sw-ehci2]: Set USB Power ON
  429. <ata1: SATA link down (SStatus 0 SControl 300)
  430. 6[sw-ehci2]: Set USB Power ON
  431. >sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  432. sw-e<hci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  433. 6>sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 4
  434. sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 4
  435. <6>sw-ehci sw-ehci.2: irq 72, io mem 0x01c1c000
  436. sw-ehci sw-ehci.2: irq 72, io mem 0x01c1c000
  437. <6>sw-ehci sw-ehci.2: USB 2.0 started, EHCI 1.00
  438. sw-ehci sw-ehci.2: USB 2.0 started, EHCI 1.00
  439. <6>hub 4-0:1.0: USB hub found
  440. hub 4-0:1.0: USB hub found
  441. <6>hub 4-0:1.0: 1 port detected
  442. hub 4-0:1.0: 1 port detected
  443. [sw-ohci2]: open clock
  444. [sw-ohci2]: open clock
  445. <6>sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
  446. sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
  447. <6>sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 5
  448. sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 5
  449. <6>sw-ohci sw-ohci.2: irq 97, io mem 0x01c1c400
  450. sw-ohci sw-ohci.2: irq 97, io mem 0x01c1c400
  451. <6>usb 2-1: new high-speed USB device number 2 using sw-ehci
  452. usb 2-1: new high-speed USB device number 2 using sw-ehci
  453. <6>hub 5-0:1.0: USB hub found
  454. hub 5-0:1.0: USB hub found
  455. <6>hub 5-0:1.0: 1 port detected
  456. hub 5-0:1.0: 1 port detected
  457. <6>usbcore: registered new interface driver usbserial
  458. usbcore: registered new interface driver usbserial
  459. <6>usbcore: registered new interface driver usbserial_generic
  460. usbcore: registered new interface driver usbserial_generic
  461. <6>USB Serial support registered for generic
  462. USB Serial support registered for generic
  463. <6>usbserial: USB Serial Driver core
  464. usbserial: USB Serial Driver core
  465. <6>usbcore: registered new interface driver option
  466. usbcore: registered new interface driver option
  467. <6>USB Serial support registered for GSM modem (1-port)
  468. USB Serial support registered for GSM modem (1-port)
  469. <6>mousedev: PS/2 mouse device common for all mice
  470. mousedev: PS/2 mouse device common for all mice
  471. <6>input: sunxi-ir as /devices/virtual/input/input0
  472. input: sunxi-ir as /devices/virtual/input/input0
  473. IR Initial OK
  474. IR Initial OK
  475. ===========================hv_keypad_init=====================
  476. ===========================hv_keypad_init=====================
  477. ========HV Inital ===================
  478. ========HV Inital ===================
  479. <3>tkey_fetch_sysconfig_para: tkey_unused.
  480. tkey_fetch_sysconfig_para: tkey_unused.
  481. hv_keypad_init: after fetch_sysconfig_para: normal_i2c: 0x0. normal_i2c[1]: 0x
  482. hv_keypad_init: after fetch_sysconfig_para: normal_i2c: 0x0. normal_i2c[1]: 0x
  483. <4>i2c i2c-0: Invalid probe address 0x00
  484. i2c i2c-0: Invalid probe address 0x00
  485. <4>i2c i2c-1: Invalid probe address 0x00
  486. i2c i2c-1: Invalid probe address 0x00
  487. <4>rtc: parse pmu_backupen failed
  488. rtc: parse pmu_backupen failed
  489. <3>sunxi-rtc sunxi-rtc: Error: Set LOSC to external failed.
  490. sunxi-rtc sunxi-rtc: Error: Set LOSC to external failed.
  491. <3>sunxi-rtc sunxi-rtc: Warning: RTC time will be wrong!
  492. sunxi-rtc sunxi-rtc: Warning: RTC time will be wrong!
  493. <6>sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
  494. sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
  495. <6>i2c /dev entries driver
  496. i2c /dev entries driver
  497. [ace_drv] start!!!
  498. [ace_drv] start!!!
  499. [ace_drv] init end!!!
  500. [ace_drv] init end!!!
  501. [pa_drv] start!!!
  502. [pa_drv] start!!!
  503. [pa_drv] init end!!!
  504. [pa_drv] init end!!!
  505. <6>axp20_ldo1: 1300 mV
  506. axp20_ldo1: 1300 mV
  507. <6>axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
  508. axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
  509. <6>axp20_ldo3: 700 <--> 3500 mV at 2800 mV
  510. axp20_ldo3: 700 <--> 3500 mV at 2800 mV
  511. <6>axp20_ldo4: 1250 <--> 3300 mV at 2800 mV
  512. axp20_ldo4: 1250 <--> 3300 mV at 2800 mV
  513. <6>axp20_buck2: 700 <--> 2275 mV at 1450 mV
  514. axp20_buck2: 700 <--> 2275 mV at 1450 mV
  515. <6>axp20_buck3: 700 <--> 3500 mV at 1300 mV
  516. axp20_buck3: 700 <--> 3500 mV at 1300 mV
  517. <6>axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
  518. axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
  519. <6>input: axp20-supplyer as /devices/platform/sunxi-i2c.0/i2c-0/0-0034/axp20-su1
  520. input: axp20-supplyer as /devices/platform/sunxi-i2c.0/i2c-0/0-0034/axp20-suppl1
  521. <4>axp20_ldo2: Failed to create debugfs directory
  522. axp20_ldo2: Failed to create debugfs directory
  523. <6>device-mapper: uevent: version 1.0.3
  524. device-mapper: uevent: version 1.0.3
  525. <6>device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhatm
  526. device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
  527. <6>device-mapper: multipath: version 1.3.0 loaded
  528. device-mapper: multipath: version 1.3.0 loaded
  529. <6>device-mapper: multipath round-robin: version 1.0.0 loaded
  530. device-mapper: multipath round-robin: version 1.0.0 loaded
  531. <6>device-mapper: multipath queue-length: version 0.1.0 loaded
  532. device-mapper: multipath queue-length: version 0.1.0 loaded
  533. <6>device-mapper: multipath service-time: version 0.2.0 loaded
  534. device-mapper: multipath service-time: version 0.2.0 loaded
  535. <6>cpuidle: using governor ladder
  536. cpuidle: using governor ladder
  537. <6>cpuidle: using governor menu
  538. cpuidle: using governor menu
  539. <6>[mmc-msg] sw_mci_init
  540. [mmc-msg] sw_mci_init
  541. <6>[mmc-msg] MMC host used card: 0x5, boot card: 0x4, io_card 0
  542. [mmc-msg] MMC host used card: 0x5, boot card: 0x4, io_card 0
  543. <6>[mmc-msg] sdc2 set round clock 400000, src 24000000
  544. [mmc-msg] sdc2 set round clock 400000, src 24000000
  545. <6>[mmc-msg] sdc2 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(B
  546. [mmc-msg] sdc2 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDRB
  547. <6>[mmc-msg] sdc2 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SB
  548. [mmc-msg] sdc2 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR1B
  549. <6>[mmc-msg] sdc2 Probe: base:0xe08d6000 irq:66 sg_cpu:c3c5f000(43c5f000) ret 0.
  550. [mmc-msg] sdc2 Probe: base:0xe08d6000 irq:66 sg_cpu:c3c5f000(43c5f000) ret 0.
  551. <6>[mmc-msg] sdc2 power on
  552. [mmc-msg] sdc2 power on
  553. <6>[mmc-msg] sdc0 set round clock 400000, src 24000000
  554. [mmc-msg] sdc0 set round clock 400000, src 24000000
  555. <6>[mmc-msg] sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(B
  556. [mmc-msg] sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDRB
  557. <6>[mmc-msg] sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGB
  558. [mmc-msg] sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACYB
  559. <6>[mmc-msg] sdc0 Probe: base:0xe08d8000 irq:64 sg_cpu:c3c60000(43c60000) ret 0.
  560. [mmc-msg] sdc0 Probe: base:0xe08d8000 irq:64 sg_cpu:c3c60000(43c60000) ret 0.
  561. <6>[mmc-msg] sdc2 set round clock 400000, src 24000000
  562. [mmc-msg] sdc2 set round clock 400000, src 24000000
  563. [mmc_pm]: failed to fetch sdio card configuration!
  564. [mmc_pm]: failed to fetch sdio card configuration!
  565. <6>sunxi_leds driver init
  566. sunxi_leds driver init
  567. <7>Registered led device: green:ph20:led1
  568. Registered led device: green:ph20:led1
  569. <7>Registered led device: blue:ph21:led2
  570. Registered led device: blue:ph21:led2
  571. <6>ledtrig-cpu: registered to indicate activity on CPUs
  572. ledtrig-cpu: registered to indicate activity on CPUs
  573. <6>usbcore: registered new interface driver usbhid
  574. usbcore: registered new interface driver usbhid
  575. <6>usbhid: USB HID core driver
  576. usbhid: USB HID core driver
  577. <6>ashmem: initialized
  578. ashmem: initialized
  579. <6>logger: created 256K log 'log_main'
  580. logger: created 256K log 'log_main'
  581. <6>logger: created 256K log 'log_events'
  582. logger: created 256K log 'log_events'
  583. <6>logger: created 256K log 'log_radio'
  584. logger: created 256K log 'log_radio'
  585. <6>logger: created 256K log 'log_system'
  586. logger: created 256K log 'log_system'
  587. <3>[mmc-err] smc 2 err, cmd 52, RTO
  588. [mmc-err] smc 2 err, cmd 52, RTO
  589. <3>[mmc-err] smc 2 err, cmd 52, RTO
  590. [mmc-err] smc 2 err, cmd 52, RTO
  591. <6>[mmc-msg] sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGB
  592. [mmc-msg] sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACYB
  593. <6>IPv4 over IPv4 tunneling driver
  594. IPv4 over IPv4 tunneling driver
  595. <6>TCP: bic registered
  596. TCP: bic registered
  597. <6>TCP: cubic registered
  598. TCP: cubic registered
  599. <6>[mmc-msg] sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGB
  600. [mmc-msg] sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACYB
  601. <6>TCP: westwood registered
  602. TCP: westwood registered
  603. <6>TCP: highspeed registered
  604. TCP: highspeed registered
  605. <6>TCP: hybla registered
  606. TCP: hybla registered
  607. <3>[mmc-err] smc 2 err, cmd 8, RTO
  608. [mmc-err] smc 2 err, cmd 8, RTO
  609. <6>TCP: htcp registered
  610. TCP: htcp registered
  611. <3>[mmc-err] smc 2 err, cmd 5, RTO
  612. [mmc-err] smc 2 err, cmd 5, RTO
  613. <6>TCP: vegas registered
  614. TCP: vegas registered
  615. <3>[mmc-err] smc 2 err, cmd 5, RTO
  616. [mmc-err] smc 2 err, cmd 5, RTO
  617. <6>TCP: veno registered
  618. TCP: veno registered
  619. <3>[mmc-err] smc 2 err, cmd 5, RTO
  620. [mmc-err] smc 2 err, cmd 5, RTO
  621. <6>TCP: scalable registered
  622. TCP: scalable registered
  623. <3>[mmc-err] smc 2 err, cmd 5, RTO
  624. [mmc-err] smc 2 err, cmd 5, RTO
  625. <6>TCP: lp registered
  626. TCP: lp registered
  627. <3>[mmc-err] smc 2 err, cmd 55, RTO
  628. [mmc-err] smc 2 err, cmd 55, RTO
  629. <6>TCP: yeah registered
  630. TCP: yeah registered
  631. <3>[mmc-err] smc 2 err, cmd 55, RTO
  632. [mmc-err] smc 2 err, cmd 55, RTO
  633. <6>TCP: illinois registered
  634. TCP: illinois registered
  635. <3>[mmc-err] smc 2 err, cmd 55, RTO
  636. [mmc-err] smc 2 err, cmd 55, RTO
  637. <6>Initializing XFRM netlink socket
  638. Initializing XFRM netlink socket
  639. <3>[mmc-err] smc 2 err, cmd 55, RTO
  640. [mmc-err] smc 2 err, cmd 55, RTO
  641. <6>[mmc-msg] sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGB
  642. [mmc-msg] sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACYB
  643. <6>NET: Registered protocol family 10
  644. NET: Registered protocol family 10
  645. <6>NET: Registered protocol family 17
  646. NET: Registered protocol family 17
  647. <6>NET: Registered protocol family 15
  648. NET: Registered protocol family 15
  649. <3>[mmc-err] smc 2 err, cmd 1, RTO
  650. [mmc-err] smc 2 err, cmd 1, RTO
  651. <6>[mmc-msg] sdc2 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(B
  652. [mmc-msg] sdc2 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDRB
  653. [mmc_pm]: No sdio card, please check your config !!
  654. [mmc_pm]: No sdio card, please check your config !!
  655. <5>Registering the dns_resolver key type
  656. Registering the dns_resolver key type
  657. <6>[mmc-msg] sdc2 power off
  658. [mmc-msg] sdc2 power off
  659. <6>VFP support v0.3: VFP support v0.3: implementor 41 architecture 2 part 30 va4
  660. implementor 41 architecture 2 part 30 variant 7 rev 4
  661. <5>Registering SWP/SWPB emulation handler
  662. Registering SWP/SWPB emulation handler
  663. <4>axp20_buck2: Failed to create debugfs directory
  664. axp20_buck2: Failed to create debugfs directory
  665. <6>[cpu_freq] INF:-------------------V-F Table-------------------
  666. [cpu_freq] INF:-------------------V-F Table-------------------
  667. <6>[cpu_freq] INF: voltage = 1450mv frequency = 1008MHz
  668. [cpu_freq] INF: voltage = 1450mv frequency = 1008MHz
  669. <6>[cpu_freq] INF: voltage = 1425mv frequency = 912MHz
  670. [cpu_freq] INF: voltage = 1425mv frequency = 912MHz
  671. <6>[cpu_freq] INF: voltage = 1350mv frequency = 864MHz
  672. [cpu_freq] INF: voltage = 1350mv frequency = 864MHz
  673. <6>[cpu_freq] INF: voltage = 1250mv frequency = 720MHz
  674. [cpu_freq] INF: voltage = 1250mv frequency = 720MHz
  675. <6>[cpu_freq] INF: voltage = 1150mv frequency = 528MHz
  676. [cpu_freq] INF: voltage = 1150mv frequency = 528MHz
  677. <6>[cpu_freq] INF: voltage = 1100mv frequency = 312MHz
  678. [cpu_freq] INF: voltage = 1100mv frequency = 312MHz
  679. <6>[cpu_freq] INF: voltage = 1050mv frequency = 144MHz
  680. [cpu_freq] INF: voltage = 1050mv frequency = 144MHz
  681. <6>[cpu_freq] INF: voltage = 1000mv frequency = 0MHz
  682. [cpu_freq] INF: voltage = 1000mv frequency = 0MHz
  683. <6>[cpu_freq] INF:-----------------------------------------------
  684. [cpu_freq] INF:-----------------------------------------------
  685. <6>[cpu_freq] INF:sunxi_cpufreq_initcall, get cpu frequency from sysconfig, maxz
  686. [cpu_freq] INF:sunxi_cpufreq_initcall, get cpu frequency from sysconfig, max frz
  687. <6>registered taskstats version 1
  688. registered taskstats version 1
  689. <6>I2C: i2c-2: HDMI I2C adapter
  690. I2C: i2c-2: HDMI I2C adapter
  691. <6>ParseEDID
  692. ParseEDID
  693. <6>EDID version: 1.3
  694. EDID version: 1.3
  695. <6>PCLK=85500000 X 1360 1424 1536 1792 Y 768 771 777 795 fr 60 PP
  696. PCLK=85500000 X 1360 1424 1536 1792 Y 768 771 777 795 fr 60 PP
  697. <6>Using above mode as preferred EDID mode
  698. Using above mode as preferred EDID mode
  699. <6>PCLK=68250000 X 1280 1328 1360 1440 Y 768 771 778 790 fr 59 PN
  700. PCLK=68250000 X 1280 1328 1360 1440 Y 768 771 778 790 fr 59 PN
  701. <4>Unimplemented SVD code 2
  702. Unimplemented SVD code 2
  703. <4>Unimplemented SVD code 6
  704. Unimplemented SVD code 6
  705. <4>Unimplemented SVD code 31
  706. Unimplemented SVD code 31
  707. <4>Unimplemented SVD code 22
  708. Unimplemented SVD code 22
  709. <4>Unimplemented SVD code 17
  710. Unimplemented SVD code 17
  711. <4>Unimplemented SVD code 21
  712. Unimplemented SVD code 21
  713. <4>Unimplemented SVD code 41
  714. Unimplemented SVD code 41
  715. <4>disp_clk: Could not find a matching pll-freq for 53900000 pclk
  716. disp_clk: Could not find a matching pll-freq for 53900000 pclk
  717. <4>disp_clk: Could not find a matching pll-freq for 74200000 pclk
  718. disp_clk: Could not find a matching pll-freq for 74200000 pclk
  719. <4>disp_clk: Could not find a matching pll-freq for 25150000 pclk
  720. disp_clk: Could not find a matching pll-freq for 25150000 pclk
  721. <4>disp_clk: Could not find a matching pll-freq for 53900000 pclk
  722. disp_clk: Could not find a matching pll-freq for 53900000 pclk
  723. <4>disp_clk: Could not find a matching pll-freq for 74600000 pclk
  724. disp_clk: Could not find a matching pll-freq for 74600000 pclk
  725. <4>disp_clk: Could not find a matching pll-freq for 26150000 pclk
  726. disp_clk: Could not find a matching pll-freq for 26150000 pclk
  727. <6>Parse_VideoData_Block: VIC 16 (native) support
  728. Parse_VideoData_Block: VIC 16 (native) support
  729. <6>Parse_VideoData_Block: VIC 5 support
  730. Parse_VideoData_Block: VIC 5 support
  731. <6>Parse_VideoData_Block: VIC 4 support
  732. Parse_VideoData_Block: VIC 4 support
  733. <6>Parse_VideoData_Block: VIC 3 support
  734. Parse_VideoData_Block: VIC 3 support
  735. <6>Parse_VideoData_Block: VIC 7 support
  736. Parse_VideoData_Block: VIC 7 support
  737. <6>Parse_VideoData_Block: VIC 2 support
  738. Parse_VideoData_Block: VIC 2 support
  739. <6>Parse_VideoData_Block: VIC 6 support
  740. Parse_VideoData_Block: VIC 6 support
  741. <6>Parse_VideoData_Block: VIC 1 support
  742. Parse_VideoData_Block: VIC 1 support
  743. <6>Parse_VideoData_Block: VIC 31 support
  744. Parse_VideoData_Block: VIC 31 support
  745. <6>Parse_VideoData_Block: VIC 20 support
  746. Parse_VideoData_Block: VIC 20 support
  747. <6>Parse_VideoData_Block: VIC 19 support
  748. Parse_VideoData_Block: VIC 19 support
  749. <6>Parse_VideoData_Block: VIC 18 support
  750. Parse_VideoData_Block: VIC 18 support
  751. <6>Parse_VideoData_Block: VIC 22 support
  752. Parse_VideoData_Block: VIC 22 support
  753. <6>Parse_VideoData_Block: VIC 17 support
  754. Parse_VideoData_Block: VIC 17 support
  755. <6>Parse_VideoData_Block: VIC 21 support
  756. Parse_VideoData_Block: VIC 21 support
  757. <6>Parse_VideoData_Block: VIC 32 support
  758. Parse_VideoData_Block: VIC 32 support
  759. <6>Parse_AudioData_Block: max channel=2
  760. Parse_AudioData_Block: max channel=2
  761. <6>Parse_AudioData_Block: SampleRate code=7
  762. Parse_AudioData_Block: SampleRate code=7
  763. <6>Parse_AudioData_Block: WordLen code=3
  764. Parse_AudioData_Block: WordLen code=3
  765. <6>Find HDMI Vendor Specific DataBlock
  766. Find HDMI Vendor Specific DataBlock
  767. <6>PCLK=74250000 X 1280 1720 1760 1980 Y 720 725 730 750 fr 50 PP
  768. PCLK=74250000 X 1280 1720 1760 1980 Y 720 725 730 750 fr 50 PP
  769. <6>PCLK=74250000 X 1920 2448 2492 2640 Y 540 542 547 562 fr 50 PP
  770. PCLK=74250000 X 1920 2448 2492 2640 Y 540 542 547 562 fr 50 PP
  771. <6>PCLK=27000000 X 720 736 798 858 Y 480 489 495 525 fr 59 NN
  772. PCLK=27000000 X 720 736 798 858 Y 480 489 495 525 fr 59 NN
  773. <6>PCLK=27000000 X 720 732 796 864 Y 576 581 586 625 fr 50 NN
  774. PCLK=27000000 X 720 732 796 864 Y 576 581 586 625 fr 50 NN
  775. <6>asoc: sndhdmi <-> sunxi-hdmiaudio.0 mapping ok
  776. asoc: sndhdmi <-> sunxi-hdmiaudio.0 mapping ok
  777. <6>waited 0 ms for EDID info
  778. waited 0 ms for EDID info
  779. <6>disp clks: lcd 85500000 pre_scale 1 hdmi 85500000 pll 171000000 2x 0
  780. disp clks: lcd 85500000 pre_scale 1 hdmi 85500000 pll 171000000 2x 0
  781. <6>Console: switching to colour frame buffer device 170x48
  782. Console: switching to colour frame buffer device 170x48
  783. <4>axp20_buck3: incomplete constraints, leaving on
  784. axp20_buck3: incomplete constraints, leaving on
  785. <4>axp20_buck2: incomplete constraints, leaving on
  786. axp20_buck2: incomplete constraints, leaving on
  787. <4>axp20_ldo4: incomplete constraints, leaving on
  788. axp20_ldo4: incomplete constraints, leaving on
  789. <4>axp20_ldo3: incomplete constraints, leaving on
  790. axp20_ldo3: incomplete constraints, leaving on
  791. <4>axp20_ldo2: incomplete constraints, leaving on
  792. axp20_ldo2: incomplete constraints, leaving on
  793. <4>axp20_ldo1: incomplete constraints, leaving on
  794. axp20_ldo1: incomplete constraints, leaving on
  795. <6>console [netcon0] enabled
  796. console [netcon0] enabled
  797. <6>netconsole: network logging started
  798. netconsole: network logging started
  799. <6>sunxi-rtc sunxi-rtc: setting system clock to 2010-01-01 00:00:00 UTC (126230)
  800. sunxi-rtc sunxi-rtc: setting system clock to 2010-01-01 00:00:00 UTC (126230400)
  801. <6>ALSA device list:
  802. ALSA device list:
  803. <6> #0: sunxi-CODEC Audio Codec
  804. #0: sunxi-CODEC Audio Codec
  805. <6> #1: sunxi-sndhdmi
  806. #1: sunxi-sndhdmi
  807. <6>Waiting for root device /dev/sdc2...
  808. Waiting for root device /dev/sdc2...
  809.  
  810. U-Boot SPL 2014.01-rc1-02133-geccc92d (Jan 11 2014 - 09:46:16)
  811. Board: Cubieboard2
  812. DRAM: 512 MiB
  813. CPU: 960000000Hz, AXI/AHB/APB: 3/2/2
  814. spl: not an uImage at 1600
  815.  
  816.  
  817. U-Boot 2014.01-rc1-02133-geccc92d (Jan 11 2014 - 09:46:16) Allwinner Technology
  818.  
  819. CPU: Allwinner A20 (SUN7I)
  820. Board: Cubieboard2
  821. I2C: ready
  822. DRAM: 512 MiB
  823. WARNING: Caches not enabled
  824. MMC: SUNXI SD/MMC: 0
  825. *** Warning - bad CRC, using default environment
  826.  
  827. In: serial
  828. Out: serial
  829. Err: serial
  830. Net: mii0
  831. Warning: failed to set MAC address
  832.  
  833. Hit any key to stop autoboot: 0
  834. ** Unrecognized filesystem type **
  835. ** File not found boot/uEnv.txt **
  836. 155 bytes read in 4 ms (37.1 KiB/s)
  837. Loaded environment from uEnv.txt
  838. ** Unrecognized filesystem type **
  839. ** File not found boot/boot.scr **
  840. ** File not found boot.scr **
  841. ** File not found /boot/script.bin **
  842. ** Unrecognized filesystem type **
  843. 46608 bytes read in 9 ms (4.9 MiB/s)
  844. 4682816 bytes read in 252 ms (17.7 MiB/s)
  845. ## Booting kernel from Legacy Image at 48000000 ...
  846. Image Name: Linux-3.4.79
  847. Created: 2017-09-28 1:38:23 UTC
  848. Image Type: ARM Linux Kernel Image (uncompressed)
  849. Data Size: 4682752 Bytes = 4.5 MiB
  850. Load Address: 40008000
  851. Entry Point: 40008000
  852. Verifying Checksum ... OK
  853. Loading Kernel Image ... OK
  854.  
  855. Starting kernel ...
  856.  
  857. <6>Booting Linux on physical CPU 0
  858. <6>Initializing cgroup subsys cpuset
  859. <6>Initializing cgroup subsys cpu
  860. <5>Linux version 3.4.79 (xdr@ubuntu12) (gcc version 4.6.3 20120201 (prerelease)7
  861. CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
  862. CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  863. Machine: sun7i
  864. <6>Memory Reserved:
  865. <6> SYS : 0x43000000 - 0x4300ffff ( 64 kB)
  866. <6> G2D : 0x50000000 - 0x50ffffff ( 16 MB)
  867. <6> LCD : 0x51000000 - 0x52ffffff ( 32 MB)
  868. <6>cma: CMA: reserved 192 MiB at 43c00000
  869. Memory policy: ECC disabled, Data cache writealloc
  870. <6>sunxi: Allwinner A20 (AW1651/sun7i) detected.
  871. <7>On node 0 totalpages: 131072
  872. <7>free_area_init_node: node 0, pgdat c09ad7c0, node_mem_map d3000000
  873. <7> DMA zone: 512 pages used for memmap
  874. <7> DMA zone: 0 pages reserved
  875. <7> DMA zone: 65024 pages, LIFO batch:15
  876. <7> Normal zone: 512 pages used for memmap
  877. <7> Normal zone: 65024 pages, LIFO batch:15
  878. <6>PERCPU: Embedded 7 pages/cpu @d3405000 s7232 r8192 d13248 u32768
  879. <7>pcpu-alloc: s7232 r8192 d13248 u32768 alloc=8*4096<c>
  880. <7>pcpu-alloc: <c>[0] <c>0 <c>[0] <c>1 <c>
  881. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
  882. <5>Kernel command line: console=ttyS0,115200 root=/dev/mmcblk1p2 loglevel=8 pand
  883. <6>PID hash table entries: 2048 (order: 1, 8192 bytes)
  884. <6>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  885. <6>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  886. <6>allocated 1048576 bytes of page_cgroup
  887. <6>please try 'cgroup_disable=memory' option if you don't want memory cgroups
  888. <6>Memory: 512MB = 512MB total
  889. <5>Memory: 260632k/260632k available, 263656k reserved, 0K highmem
  890. <5>Virtual kernel memory layout:
  891. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  892. fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  893. vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
  894. lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
  895. pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  896. modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  897. .text : 0xc0008000 - 0xc08169a4 (8251 kB)
  898. .init : 0xc0817000 - 0xc0945c40 (1212 kB)
  899. .data : 0xc0946000 - 0xc09b4a28 ( 443 kB)
  900. .bss : 0xc09b4a4c - 0xc0b8b828 (1884 kB)
  901. <6>SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  902. <6>Preemptible hierarchical RCU implementation.
  903. <6> RCU dyntick-idle grace-period acceleration is enabled.
  904. <6> Additional per-CPU info printed with stalls.
  905. <6>NR_IRQS:192
  906. <6>Architected local timer running at 24.00MHz.
  907. <6>sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  908. <2>start_kernel(): bug: interrupts were enabled early
  909. <6>Console: colour dummy device 80x30
  910. <6>console [tty0] enabled
  911. <6>Calibrating delay loop... <c>1908.73 BogoMIPS (lpj=9543680)
  912. <6>pid_max: default: 32768 minimum: 301
  913. <6>Mount-cache hash table entries: 512
  914. <6>Initializing cgroup subsys cpuacct
  915. <6>Initializing cgroup subsys memory
  916. <6>Initializing cgroup subsys devices
  917. <6>Initializing cgroup subsys freezer
  918. <6>Initializing cgroup subsys blkio
  919. <6>Initializing cgroup subsys perf_event
  920. <6>CPU: Testing write buffer coherency: ok
  921. <6>CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  922. <6>hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
  923. <6>Setting up static identity map for 0x405b0118 - 0x405b0170
  924. CPU1: Booted secondary processor
  925. <6>CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  926. <6>Brought up 2 CPUs
  927. <6>SMP: Total of 2 processors activated (3824.02 BogoMIPS).
  928. <6>devtmpfs: initialized
  929. <6>dummy:
  930. <6>NET: Registered protocol family 16
  931. <6>DMA: preallocated 256 KiB pool for atomic coherent allocations
  932. <6>hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  933. <6>hw-breakpoint: maximum watchpoint size is 8 bytes.
  934. <6>[ccu-inf] aw clock manager init
  935. <6>[ccu-inf] aw_ccu_init
  936. <6>[ccu-inf] script config pll3 to 297MHz
  937. <6>[ccu-inf] script config pll4 to 300MHz
  938. <6>[ccu-inf] script config pll6 to 600MHz
  939. <6>[ccu-inf] script config pll7 to 297MHz
  940. <6>[ccu-inf] script config pll8 to 336MHz
  941. <6>Init eGon pin module V2.0
  942. <6>bio: create slab <bio-0> at 0
  943. <5>SCSI subsystem initialized
  944. <7>libata version 3.00 loaded.
  945. <6>usbcore: registered new interface driver usbfs
  946. <6>usbcore: registered new interface driver hub
  947. <6>usbcore: registered new device driver usb
  948. <6>Linux media interface: v0.10
  949. <6>Linux video capture interface: v2.00
  950. <6>Advanced Linux Sound Architecture Driver Version 1.0.25.
  951. <6>cfg80211: Calling CRDA to update world regulatory domain
  952. <6>Switching to clocksource arch_sys_counter
  953. <5>FS-Cache: Loaded
  954. <6>CacheFiles: Loaded
  955. <6>sw_hcd_host0 sw_hcd_host0: sw_hcd host driver
  956. <6>sw_hcd_host0 sw_hcd_host0: new USB bus registered, assigned bus number 1
  957. <6>hub 1-0:1.0: USB hub found
  958. <6>hub 1-0:1.0: 1 port detected
  959. config i2c gpio with gpio_config api
  960. <6>axp_mfd 0-0034: AXP (CHIP ID: 0x41) detected
  961. [AXP]axp driver uning configuration failed(342)
  962. [AXP]power_start = 0
  963. <6>I2C: i2c-0: AW16XX I2C adapter
  964. <6>I2C: i2c-1: AW16XX I2C adapter
  965. <6>NET: Registered protocol family 2
  966. <6>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  967. <6>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  968. <6>TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
  969. <6>TCP: Hash tables configured (established 16384 bind 16384)
  970. <6>TCP: reno registered
  971. <6>UDP hash table entries: 256 (order: 1, 8192 bytes)
  972. <6>UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  973. <6>NET: Registered protocol family 1
  974. <6>RPC: Registered named UNIX socket transport module.
  975. <6>RPC: Registered udp transport module.
  976. <6>RPC: Registered tcp transport module.
  977. <6>RPC: Registered tcp NFSv4.1 backchannel transport module.
  978. pm: select wifi: rtl8192cu
  979. <4>wifi_pm: Unsupported wifi type!
  980. [wifi_pm]: wifi gpio init is OK !!
  981. <6>[PM] bt is disable at script fex
  982. <6>audit: initializing netlink socket (disabled)
  983. <5>type=2000 audit(0.550:1): initialized
  984. <5>VFS: Disk quotas dquot_6.5.2
  985. Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  986. <6>exFAT: Version 1.2.9
  987. <5>NFS: Registering the id_resolver key type
  988. <6>NTFS driver 2.1.30 [Flags: R/W].
  989. <6>fuse init (API version 7.18)
  990. <6>msgmni has been set to 893
  991. <3>alg: comp: Compression test 1 failed for lzo-generic: output len = 57
  992. <6>alg: No test for stdrng (krng)
  993. <6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  994. <6>io scheduler noop registered
  995. <6>io scheduler deadline registered
  996. <6>io scheduler cfq registered (default)
  997. <6>sunxi disp driver loaded (/dev/disp api 1.0)
  998. <6>Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
  999. <6>[uart]: used uart info.: 0x19
  1000. <6>[uart]: serial probe 0 irq 33 mapbase 0x01c28000
  1001. <6>sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 33) is a U6_16550A
  1002. Booting Linux on physical CPU 0
  1003. Initializing cgroup subsys cpuset
  1004. Initializing cgroup subsys cpu
  1005. Linux version 3.4.79 (xdr@ubuntu12) (gcc version 4.6.3 20120201 (prerelease) (c7
  1006. CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
  1007. CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  1008. Machine: sun7i
  1009. Memory Reserved:
  1010. SYS : 0x43000000 - 0x4300ffff ( 64 kB)
  1011. G2D : 0x50000000 - 0x50ffffff ( 16 MB)
  1012. LCD : 0x51000000 - 0x52ffffff ( 32 MB)
  1013. cma: CMA: reserved 192 MiB at 43c00000
  1014. Memory policy: ECC disabled, Data cache writealloc
  1015. sunxi: Allwinner A20 (AW1651/sun7i) detected.
  1016. On node 0 totalpages: 131072
  1017. free_area_init_node: node 0, pgdat c09ad7c0, node_mem_map d3000000
  1018. DMA zone: 512 pages used for memmap
  1019. DMA zone: 0 pages reserved
  1020. DMA zone: 65024 pages, LIFO batch:15
  1021. Normal zone: 512 pages used for memmap
  1022. Normal zone: 65024 pages, LIFO batch:15
  1023. PERCPU: Embedded 7 pages/cpu @d3405000 s7232 r8192 d13248 u32768
  1024. pcpu-alloc: s7232 r8192 d13248 u32768 alloc=8*4096
  1025. pcpu-alloc: [0] 0 [0] 1
  1026. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
  1027. Kernel command line: console=ttyS0,115200 root=/dev/mmcblk1p2 loglevel=8 panic=d
  1028. PID hash table entries: 2048 (order: 1, 8192 bytes)
  1029. Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  1030. Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  1031. allocated 1048576 bytes of page_cgroup
  1032. please try 'cgroup_disable=memory' option if you don't want memory cgroups
  1033. Memory: 512MB = 512MB total
  1034. Memory: 260632k/260632k available, 263656k reserved, 0K highmem
  1035. Virtual kernel memory layout:
  1036. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  1037. fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  1038. vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
  1039. lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
  1040. pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  1041. modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  1042. .text : 0xc0008000 - 0xc08169a4 (8251 kB)
  1043. .init : 0xc0817000 - 0xc0945c40 (1212 kB)
  1044. .data : 0xc0946000 - 0xc09b4a28 ( 443 kB)
  1045. .bss : 0xc09b4a4c - 0xc0b8b828 (1884 kB)
  1046. SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  1047. Preemptible hierarchical RCU implementation.
  1048. RCU dyntick-idle grace-period acceleration is enabled.
  1049. Additional per-CPU info printed with stalls.
  1050. NR_IRQS:192
  1051. Architected local timer running at 24.00MHz.
  1052. sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  1053. start_kernel(): bug: interrupts were enabled early
  1054. Console: colour dummy device 80x30
  1055. console [tty0] enabled
  1056. Calibrating delay loop... 1908.73 BogoMIPS (lpj=9543680)
  1057. pid_max: default: 32768 minimum: 301
  1058. Mount-cache hash table entries: 512
  1059. Initializing cgroup subsys cpuacct
  1060. Initializing cgroup subsys memory
  1061. Initializing cgroup subsys devices
  1062. Initializing cgroup subsys freezer
  1063. Initializing cgroup subsys blkio
  1064. Initializing cgroup subsys perf_event
  1065. CPU: Testing write buffer coherency: ok
  1066. CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  1067. hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
  1068. Setting up static identity map for 0x405b0118 - 0x405b0170
  1069. CPU1: Booted secondary processor
  1070. CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  1071. Brought up 2 CPUs
  1072. SMP: Total of 2 processors activated (3824.02 BogoMIPS).
  1073. devtmpfs: initialized
  1074. dummy:
  1075. NET: Registered protocol family 16
  1076. DMA: preallocated 256 KiB pool for atomic coherent allocations
  1077. hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  1078. hw-breakpoint: maximum watchpoint size is 8 bytes.
  1079. [ccu-inf] aw clock manager init
  1080. [ccu-inf] aw_ccu_init
  1081. [ccu-inf] script config pll3 to 297MHz
  1082. [ccu-inf] script config pll4 to 300MHz
  1083. [ccu-inf] script config pll6 to 600MHz
  1084. [ccu-inf] script config pll7 to 297MHz
  1085. [ccu-inf] script config pll8 to 336MHz
  1086. Init eGon pin module V2.0
  1087. bio: create slab <bio-0> at 0
  1088. SCSI subsystem initialized
  1089. libata version 3.00 loaded.
  1090. usbcore: registered new interface driver usbfs
  1091. usbcore: registered new interface driver hub
  1092. usbcore: registered new device driver usb
  1093. Linux media interface: v0.10
  1094. Linux video capture interface: v2.00
  1095. Advanced Linux Sound Architecture Driver Version 1.0.25.
  1096. cfg80211: Calling CRDA to update world regulatory domain
  1097. Switching to clocksource arch_sys_counter
  1098. FS-Cache: Loaded
  1099. CacheFiles: Loaded
  1100. sw_hcd_host0 sw_hcd_host0: sw_hcd host driver
  1101. sw_hcd_host0 sw_hcd_host0: new USB bus registered, assigned bus number 1
  1102. hub 1-0:1.0: USB hub found
  1103. hub 1-0:1.0: 1 port detected
  1104. config i2c gpio with gpio_config api
  1105. axp_mfd 0-0034: AXP (CHIP ID: 0x41) detected
  1106. [AXP]axp driver uning configuration failed(342)
  1107. [AXP]power_start = 0
  1108. I2C: i2c-0: AW16XX I2C adapter
  1109. I2C: i2c-1: AW16XX I2C adapter
  1110. NET: Registered protocol family 2
  1111. IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  1112. TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  1113. TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
  1114. TCP: Hash tables configured (established 16384 bind 16384)
  1115. TCP: reno registered
  1116. UDP hash table entries: 256 (order: 1, 8192 bytes)
  1117. UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  1118. NET: Registered protocol family 1
  1119. RPC: Registered named UNIX socket transport module.
  1120. RPC: Registered udp transport module.
  1121. RPC: Registered tcp transport module.
  1122. RPC: Registered tcp NFSv4.1 backchannel transport module.
  1123. pm: select wifi: rtl8192cu
  1124. wifi_pm: Unsupported wifi type!
  1125. [wifi_pm]: wifi gpio init is OK !!
  1126. [PM] bt is disable at script fex
  1127. audit: initializing netlink socket (disabled)
  1128. type=2000 audit(0.550:1): initialized
  1129. VFS: Disk quotas dquot_6.5.2
  1130. Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  1131. exFAT: Version 1.2.9
  1132. NFS: Registering the id_resolver key type
  1133. NTFS driver 2.1.30 [Flags: R/W].
  1134. fuse init (API version 7.18)
  1135. msgmni has been set to 893
  1136. alg: comp: Compression test 1 failed for lzo-generic: output len = 57
  1137. alg: No test for stdrng (krng)
  1138. Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  1139. io scheduler noop registered
  1140. io scheduler deadline registered
  1141. io scheduler cfq registered (default)
  1142. sunxi disp driver loaded (/dev/disp api 1.0)
  1143. Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
  1144. [uart]: used uart info.: 0x19
  1145. [uart]: serial probe 0 irq 33 mapbase 0x01c28000
  1146. sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 33) is a U6_16550A
  1147. <6>console [ttyS0] enabled
  1148. console [ttyS0] enabled
  1149. <6>[uart]: serial probe 3 irq 36 mapbase 0x01c28c00
  1150. [uart]: serial probe 3 irq 36 mapbase 0x01c28c00
  1151. <6>sunxi-uart.3: ttyS1 at MMIO 0x1c28c00 (irq = 36) is a U6_16550A
  1152. sunxi-uart.3: ttyS1 at MMIO 0x1c28c00 (irq = 36) is a U6_16550A
  1153. <6>[uart]: serial probe 4 irq 49 mapbase 0x01c29000
  1154. [uart]: serial probe 4 irq 49 mapbase 0x01c29000
  1155. <6>sunxi-uart.4: ttyS2 at MMIO 0x1c29000 (irq = 49) is a U6_16550A
  1156. sunxi-uart.4: ttyS2 at MMIO 0x1c29000 (irq = 49) is a U6_16550A
  1157. <7>G2D: drv_g2d_init
  1158. G2D: drv_g2d_init
  1159. <6>G2D: g2dmem: g2d_start=50000000, g2d_size=1000000
  1160. G2D: g2dmem: g2d_start=50000000, g2d_size=1000000
  1161. <6>G2D: head:d0000000,tail:d1000000
  1162. G2D: head:d0000000,tail:d1000000
  1163. <6>G2D: Module initialized.major:250
  1164. G2D: Module initialized.major:250
  1165. <6>brd: module loaded
  1166. brd: module loaded
  1167. <6>loop: module loaded
  1168. loop: module loaded
  1169. [NAND] nand driver version: 0x2 0x9
  1170. [NAND] nand driver version: 0x2 0x9
  1171. <4>Dev Sunxi softw311 nand magic does not match for MBR 1: ÿÿÿÿÿÿÿÿ
  1172. Dev Sunxi softw311 nand magic does not match for MBR 1: ÿÿÿÿÿÿÿÿ
  1173. <4>Dev Sunxi softw311 nand magic does not match for MBR 2: ÿÿÿÿÿÿÿÿ
  1174. Dev Sunxi softw311 nand magic does not match for MBR 2: ÿÿÿÿÿÿÿÿ
  1175. <4>Dev Sunxi softw311 nand magic does not match for MBR 3: ÿÿÿÿÿÿÿÿ
  1176. Dev Sunxi softw311 nand magic does not match for MBR 3: ÿÿÿÿÿÿÿÿ
  1177. <4>Dev Sunxi softw311 nand magic does not match for MBR 4: ÿÿÿÿÿÿÿÿ
  1178. Dev Sunxi softw311 nand magic does not match for MBR 4: ÿÿÿÿÿÿÿÿ
  1179. <4>Dev Sunxi softw311 nand header bad for all MBR copies, MBR corrupted or not .
  1180. Dev Sunxi softw311 nand header bad for all MBR copies, MBR corrupted or not pre.
  1181. <4>Dev Sunxi softw411 nand magic does not match for MBR 1: ÿÿÿÿÿÿÿÿ
  1182. Dev Sunxi softw411 nand magic does not match for MBR 1: ÿÿÿÿÿÿÿÿ
  1183. <4>Dev Sunxi softw411 nand magic does not match for MBR 2: ÿÿÿÿÿÿÿÿ
  1184. Dev Sunxi softw411 nand magic does not match for MBR 2: ÿÿÿÿÿÿÿÿ
  1185. <4>Dev Sunxi softw411 nand magic does not match for MBR 3: ÿÿÿÿÿÿÿÿ
  1186. Dev Sunxi softw411 nand magic does not match for MBR 3: ÿÿÿÿÿÿÿÿ
  1187. <4>Dev Sunxi softw411 nand magic does not match for MBR 4: ÿÿÿÿÿÿÿÿ
  1188. Dev Sunxi softw411 nand magic does not match for MBR 4: ÿÿÿÿÿÿÿÿ
  1189. <4>Dev Sunxi softw411 nand header bad for all MBR copies, MBR corrupted or not .
  1190. Dev Sunxi softw411 nand header bad for all MBR copies, MBR corrupted or not pre.
  1191. <6> nand: unknown partition table
  1192. nand: unknown partition table
  1193. [NAND]nand driver, ok.
  1194. [NAND]nand driver, ok.
  1195. SATA AHCI Phy Power Failed!!
  1196. SATA AHCI Phy Power Failed!!
  1197. SATA AHCI Phy Calibration Failed!!
  1198. SATA AHCI Phy Calibration Failed!!
  1199. <6>sw_ahci sw_ahci.0: controller can't do PMP, turning off CAP_PMP
  1200. sw_ahci sw_ahci.0: controller can't do PMP, turning off CAP_PMP
  1201. <4>sw_ahci sw_ahci.0: forcing PORTS_IMPL to 0x1
  1202. sw_ahci sw_ahci.0: forcing PORTS_IMPL to 0x1
  1203. <6>sw_ahci sw_ahci.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform e
  1204. sw_ahci sw_ahci.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
  1205. <6>sw_ahci sw_ahci.0: flags: ncq sntf pm led clo only pio slum part ccc
  1206. sw_ahci sw_ahci.0: flags: ncq sntf pm led clo only pio slum part ccc
  1207. <6>scsi0 : sw_ahci_platform
  1208. scsi0 : sw_ahci_platform
  1209. <6>ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88
  1210. ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88
  1211. <6>sunxi_emac Using mii phy on PortA
  1212. sunxi_emac Using mii phy on PortA
  1213. <6>sunxi_emac Using MAC from SID: 02:45:04:82:9e:45sunxi_emac Using MAC from SI2
  1214.  
  1215. PPP generic driver version 2.4.2
  1216. <6>PPP BSD Compression module registered
  1217. PPP BSD Compression module registered
  1218. <6>PPP Deflate Compression module registered
  1219. PPP Deflate Compression module registered
  1220. <6>PPP MPPE Compression module registered
  1221. PPP MPPE Compression module registered
  1222. <6>NET: Registered protocol family 24
  1223. NET: Registered protocol family 24
  1224. <6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  1225. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  1226. <6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  1227. ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  1228. [sw-ehci1]: open clock
  1229. [sw-ehci1]: open clock
  1230. [sw-ehci1]: Set USB Power ON
  1231. [sw-ehci1]: Set USB Power ON
  1232. <6>sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  1233. sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  1234. <6>sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 2
  1235. sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 2
  1236. <6>sw-ehci sw-ehci.1: irq 71, io mem 0x01c14000
  1237. sw-ehci sw-ehci.1: irq 71, io mem 0x01c14000
  1238. <6>sw-ehci sw-ehci.1: USB 2.0 started, EHCI 1.00
  1239. sw-ehci sw-ehci.1: USB 2.0 started, EHCI 1.00
  1240. ehci_irq: port change detect
  1241. ehci_irq: port change detect
  1242. <6>hub 2-0:1.0: USB hub found
  1243. hub 2-0:1.0: USB hub found
  1244. <6>hub 2-0:1.0: 1 port detected
  1245. hub 2-0:1.0: 1 port detected
  1246. [sw-ohci1]: open clock
  1247. [sw-ohci1]: open clock
  1248. <6>sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
  1249. sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
  1250. <6>sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 3
  1251. sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 3
  1252. <6>sw-ohci sw-ohci.1: irq 96, io mem 0x01c14400
  1253. sw-ohci sw-ohci.1: irq 96, io mem 0x01c14400
  1254. <6>hub 3-0:1.0: USB hub found
  1255. hub 3-0:1.0: USB hub found
  1256. <6>hub 3-0:1.0: 1 port detected
  1257. hub 3-0:1.0: 1 port detected
  1258. [sw-ehci2]: open clock
  1259. [sw-ehci2]: open clock
  1260. <6>ata1: SATA link down (SStatus 0 SControl 300)
  1261. ata1: SATA link down (SStatus 0 SControl 300)
  1262. [sw-ehci2]: Set USB Power ON
  1263. [sw-ehci2]: Set USB Power ON
  1264. <6>sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  1265. sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  1266. <6>sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 4
  1267. sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 4
  1268. <6>sw-ehci sw-ehci.2: irq 72, io mem 0x01c1c000
  1269. sw-ehci sw-ehci.2: irq 72, io mem 0x01c1c000
  1270. <6>usb 2-1: new high-speed USB device number 2 using sw-ehci
  1271. usb 2-1: new high-speed USB device number 2 using sw-ehci
  1272. <6>sw-ehci sw-ehci.2: USB 2.0 started, EHCI 1.00
  1273. sw-ehci sw-ehci.2: USB 2.0 started, EHCI 1.00
  1274. <6>hub 4-0:1.0: USB hub found
  1275. hub 4-0:1.0: USB hub found
  1276. <6>hub 4-0:1.0: 1 port detected
  1277. hub 4-0:1.0: 1 port detected
  1278. [sw-ohci2]: open clock
  1279. [sw-ohci2]: open clock
  1280. <6>sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
  1281. sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
  1282. <6>sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 5
  1283. sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 5
  1284. <6>sw-ohci sw-ohci.2: irq 97, io mem 0x01c1c400
  1285. sw-ohci sw-ohci.2: irq 97, io mem 0x01c1c400
  1286. <6>hub 5-0:1.0: USB hub found
  1287. hub 5-0:1.0: USB hub found
  1288. <6>hub 5-0:1.0: 1 port detected
  1289. hub 5-0:1.0: 1 port detected
  1290. <6>usbcore: registered new interface driver usbserial
  1291. usbcore: registered new interface driver usbserial
  1292. <6>usbcore: registered new interface driver usbserial_generic
  1293. usbcore: registered new interface driver usbserial_generic
  1294. <6>USB Serial support registered for generic
  1295. USB Serial support registered for generic
  1296. <6>usbserial: USB Serial Driver core
  1297. usbserial: USB Serial Driver core
  1298. <6>usbcore: registered new interface driver option
  1299. usbcore: registered new interface driver option
  1300. <6>USB Serial support registered for GSM modem (1-port)
  1301. USB Serial support registered for GSM modem (1-port)
  1302. <6>mousedev: PS/2 mouse device common for all mice
  1303. mousedev: PS/2 mouse device common for all mice
  1304. <6>input: sunxi-ir as /devices/virtual/input/input0
  1305. input: sunxi-ir as /devices/virtual/input/input0
  1306. IR Initial OK
  1307. IR Initial OK
  1308. ===========================hv_keypad_init=====================
  1309. ===========================hv_keypad_init=====================
  1310. ========HV Inital ===================
  1311. ========HV Inital ===================
  1312. <3>tkey_fetch_sysconfig_para: tkey_unused.
  1313. tkey_fetch_sysconfig_para: tkey_unused.
  1314. hv_keypad_init: after fetch_sysconfig_para: normal_i2c: 0x0. normal_i2c[1]: 0x
  1315. hv_keypad_init: after fetch_sysconfig_para: normal_i2c: 0x0. normal_i2c[1]: 0x
  1316. <4>i2c i2c-0: Invalid probe address 0x00
  1317. i2c i2c-0: Invalid probe address 0x00
  1318. <4>i2c i2c-1: Invalid probe address 0x00
  1319. i2c i2c-1: Invalid probe address 0x00
  1320. <4>rtc: parse pmu_backupen failed
  1321. rtc: parse pmu_backupen failed
  1322. <3>sunxi-rtc sunxi-rtc: Error: Set LOSC to external failed.
  1323. sunxi-rtc sunxi-rtc: Error: Set LOSC to external failed.
  1324. <3>sunxi-rtc sunxi-rtc: Warning: RTC time will be wrong!
  1325. sunxi-rtc sunxi-rtc: Warning: RTC time will be wrong!
  1326. <6>sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
  1327. sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
  1328. <6>i2c /dev entries driver
  1329. i2c /dev entries driver
  1330. [ace_drv] start!!!
  1331. [ace_drv] start!!!
  1332. [ace_drv] init end!!!
  1333. [ace_drv] init end!!!
  1334. [pa_drv] start!!!
  1335. [pa_drv] start!!!
  1336. [pa_drv] init end!!!
  1337. [pa_drv] init end!!!
  1338. <6>axp20_ldo1: 1300 mV
  1339. axp20_ldo1: 1300 mV
  1340. <6>axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
  1341. axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
  1342. <6>axp20_ldo3: 700 <--> 3500 mV at 2800 mV
  1343. axp20_ldo3: 700 <--> 3500 mV at 2800 mV
  1344. <6>axp20_ldo4: 1250 <--> 3300 mV at 2800 mV
  1345. axp20_ldo4: 1250 <--> 3300 mV at 2800 mV
  1346. <6>axp20_buck2: 700 <--> 2275 mV at 1450 mV
  1347. axp20_buck2: 700 <--> 2275 mV at 1450 mV
  1348. <6>axp20_buck3: 700 <--> 3500 mV at 1300 mV
  1349. axp20_buck3: 700 <--> 3500 mV at 1300 mV
  1350. <6>axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
  1351. axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
  1352. <6>input: axp20-supplyer as /devices/platform/sunxi-i2c.0/i2c-0/0-0034/axp20-su1
  1353. input: axp20-supplyer as /devices/platform/sunxi-i2c.0/i2c-0/0-0034/axp20-suppl1
  1354. <4>axp20_ldo2: Failed to create debugfs directory
  1355. axp20_ldo2: Failed to create debugfs directory
  1356. <6>device-mapper: uevent: version 1.0.3
  1357. device-mapper: uevent: version 1.0.3
  1358. <6>device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhatm
  1359. device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
  1360. <6>device-mapper: multipath: version 1.3.0 loaded
  1361. device-mapper: multipath: version 1.3.0 loaded
  1362. <6>device-mapper: multipath round-robin: version 1.0.0 loaded
  1363. device-mapper: multipath round-robin: version 1.0.0 loaded
  1364. <6>device-mapper: multipath queue-length: version 0.1.0 loaded
  1365. device-mapper: multipath queue-length: version 0.1.0 loaded
  1366. <6>device-mapper: multipath service-time: version 0.2.0 loaded
  1367. device-mapper: multipath service-time: version 0.2.0 loaded
  1368. <6>cpuidle: using governor ladder
  1369. cpuidle: using governor ladder
  1370. <6>cpuidle: using governor menu
  1371. cpuidle: using governor menu
  1372. <6>[mmc-msg] sw_mci_init
  1373. [mmc-msg] sw_mci_init
  1374. <6>[mmc-msg] MMC host used card: 0x5, boot card: 0x4, io_card 0
  1375. [mmc-msg] MMC host used card: 0x5, boot card: 0x4, io_card 0
  1376. <6>[mmc-msg] sdc2 set round clock 400000, src 24000000
  1377. [mmc-msg] sdc2 set round clock 400000, src 24000000
  1378. <6>[mmc-msg] sdc2 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(B
  1379. [mmc-msg] sdc2 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDRB
  1380. <6>[mmc-msg] sdc2 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SB
  1381. [mmc-msg] sdc2 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR1B
  1382. <6>[mmc-msg] sdc2 Probe: base:0xe08d6000 irq:66 sg_cpu:c3c5f000(43c5f000) ret 0.
  1383. [mmc-msg] sdc2 Probe: base:0xe08d6000 irq:66 sg_cpu:c3c5f000(43c5f000) ret 0.
  1384. <6>[mmc-msg] sdc2 power on
  1385. [mmc-msg] sdc2 power on
  1386. <6>[mmc-msg] sdc0 set round clock 400000, src 24000000
  1387. [mmc-msg] sdc0 set round clock 400000, src 24000000
  1388. <6>[mmc-msg] sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(B
  1389. [mmc-msg] sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDRB
  1390. <6>[mmc-msg] sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGB
  1391. [mmc-msg] sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACYB
  1392. <6>[mmc-msg] sdc0 Probe: base:0xe08d8000 irq:64 sg_cpu:c3c60000(43c60000) ret 0.
  1393. <6>[mmc-msg] sdc2 set round clock 400000, src 24000000
  1394. [mmc-msg] sdc0 Probe: base:0xe08d8000 irq:64 sg_cpu:c3c60000(43c60000) ret 0.
  1395. [mmc-msg] sdc2 set round clock 400000, src 24000000
  1396. [mmc_pm]: failed to fetch sdio card configuration!
  1397. [mmc_pm]: failed to fetch sdio card configuration!
  1398. <6>sunxi_leds driver init
  1399. sunxi_leds driver init
  1400. <7>Registered led device: led1
  1401. Registered led device: led1
  1402. <7>Registered led device: blue:ph21:led2
  1403. Registered led device: blue:ph21:led2
  1404. <6>ledtrig-cpu: registered to indicate activity on CPUs
  1405. ledtrig-cpu: registered to indicate activity on CPUs
  1406. <6>usbcore: registered new interface driver usbhid
  1407. usbcore: registered new interface driver usbhid
  1408. <6>usbhid: USB HID core driver
  1409. usbhid: USB HID core driver
  1410. <6>ashmem: initialized
  1411. ashmem: initialized
  1412. <6>logger: created 256K log 'log_main'
  1413. logger: created 256K log 'log_main'
  1414. <3>[mmc-err] smc 2 err, cmd 52, RTO
  1415. [mmc-err] smc 2 err, cmd 52, RTO
  1416. <6>logger: created 256K log 'log_events'
  1417. logger: created 256K log 'log_events'
  1418. <3>[mmc-err] smc 2 err, cmd 52, RTO
  1419. [mmc-err] smc 2 err, cmd 52, RTO
  1420. <6>[mmc-msg] sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGB
  1421. <6>logger: created 256K log 'log_radio'
  1422. [mm<c-msg] sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACB
  1423. 6logger: created 256K log 'log_radio'
  1424. >logger: created 256K log 'log_system'
  1425. logger: created 256K log 'log_system'
  1426. <6>IPv4 over IPv4 tunneling driver
  1427. <6>[mmc-msg] sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGB
  1428. IPv4 over IPv4 tunneling driver
  1429. [mmc-msg] sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACYB
  1430. <3>[mmc-err] smc 2 err, cmd 8, RTO
  1431. [mmc-err] smc 2 err, cmd 8, RTO
  1432. <6>TCP: bic registered
  1433. TCP: bic registered
  1434. <3>[mmc-err] smc 2 err, cmd 5, RTO
  1435. [mmc-err] smc 2 err, cmd 5, RTO
  1436. <6>TCP: cubic registered
  1437. TCP: cubic registered
  1438. <3>[mmc-err] smc 2 err, cmd 5, RTO
  1439. [mmc-err] smc 2 err, cmd 5, RTO
  1440. <6>TCP: westwood registered
  1441. TCP: westwood registered
  1442. <3>[mmc-err] smc 2 err, cmd 5, RTO
  1443. [mmc-err] smc 2 err, cmd 5, RTO
  1444. <6>TCP: highspeed registered
  1445. TCP: highspeed registered
  1446. <3>[mmc-err] smc 2 err, cmd 5, RTO
  1447. [mmc-err] smc 2 err, cmd 5, RTO
  1448. <6>TCP: hybla registered
  1449. TCP: hybla registered
  1450. <3>[mmc-err] smc 2 err, cmd 55, RTO
  1451. [mmc-err] smc 2 err, cmd 55, RTO
  1452. <6>TCP: htcp registered
  1453. TCP: htcp registered
  1454. <3>[mmc-err] smc 2 err, cmd 55, RTO
  1455. [mmc-err] smc 2 err, cmd 55, RTO
  1456. <6>TCP: vegas registered
  1457. TCP: vegas registered
  1458. <3>[mmc-err] smc 2 err, cmd 55, RTO
  1459. [mmc-err] smc 2 err, cmd 55, RTO
  1460. <6>TCP: veno registered
  1461. TCP: veno registered
  1462. <3>[mmc-err] smc 2 err, cmd 55, RTO
  1463. [mmc-err] smc 2 err, cmd 55, RTO
  1464. <6>TCP: scalable registered
  1465. <6>[mmc-msg] sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGB
  1466. TCP: scalable registered
  1467. [mmc-msg] sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACYB
  1468. <3>[mmc-err] smc 2 err, cmd 1, RTO
  1469. [mmc-err] smc 2 err, cmd 1, RTO
  1470. <6>TCP: lp registered
  1471. <6>[mmc-msg] sdc2 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(B
  1472. TC<P: lp registered
  1473. 6>[mmc[mmc-msg] sdc2 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGAB
  1474. -msg] sdc2 power off
  1475. [mmc-msg] sdc2 power off
  1476. <6>TCP: yeah registered
  1477. TCP: yeah registered
  1478. <6>TCP: illinois registered
  1479. TCP: illinois registered
  1480. <6>Initializing XFRM netlink socket
  1481. Initializing XFRM netlink socket
  1482. <6>NET: Registered protocol family 10
  1483. NET: Registered protocol family 10
  1484. <6>NET: Registered protocol family 17
  1485. NET: Registered protocol family 17
  1486. <6>NET: Registered protocol family 15
  1487. NET: Registered protocol family 15
  1488. [mmc_pm]: No sdio card, please check your config !!
  1489. [mmc_pm]: No sdio card, please check your config !!
  1490. <5>Registering the dns_resolver key type
  1491. Registering the dns_resolver key type
  1492. <6>VFP support v0.3: VFP support v0.3: implementor 41 architecture 2 part 30 va4
  1493. implementor 41 architecture 2 part 30 variant 7 rev 4
  1494. <5>Registering SWP/SWPB emulation handler
  1495. Registering SWP/SWPB emulation handler
  1496. <4>axp20_buck2: Failed to create debugfs directory
  1497. axp20_buck2: Failed to create debugfs directory
  1498. <6>[cpu_freq] INF:-------------------V-F Table-------------------
  1499. [cpu_freq] INF:-------------------V-F Table-------------------
  1500. <6>[cpu_freq] INF: voltage = 1450mv frequency = 1008MHz
  1501. [cpu_freq] INF: voltage = 1450mv frequency = 1008MHz
  1502. <6>[cpu_freq] INF: voltage = 1425mv frequency = 912MHz
  1503. [cpu_freq] INF: voltage = 1425mv frequency = 912MHz
  1504. <6>[cpu_freq] INF: voltage = 1350mv frequency = 864MHz
  1505. [cpu_freq] INF: voltage = 1350mv frequency = 864MHz
  1506. <6>[cpu_freq] INF: voltage = 1250mv frequency = 720MHz
  1507. [cpu_freq] INF: voltage = 1250mv frequency = 720MHz
  1508. <6>[cpu_freq] INF: voltage = 1150mv frequency = 528MHz
  1509. [cpu_freq] INF: voltage = 1150mv frequency = 528MHz
  1510. <6>[cpu_freq] INF: voltage = 1100mv frequency = 312MHz
  1511. [cpu_freq] INF: voltage = 1100mv frequency = 312MHz
  1512. <6>[cpu_freq] INF: voltage = 1050mv frequency = 144MHz
  1513. [cpu_freq] INF: voltage = 1050mv frequency = 144MHz
  1514. <6>[cpu_freq] INF: voltage = 1000mv frequency = 0MHz
  1515. [cpu_freq] INF: voltage = 1000mv frequency = 0MHz
  1516. <6>[cpu_freq] INF:-----------------------------------------------
  1517. [cpu_freq] INF:-----------------------------------------------
  1518. <6>[cpu_freq] INF:sunxi_cpufreq_initcall, get cpu frequency from sysconfig, maxz
  1519. [cpu_freq] INF:sunxi_cpufreq_initcall, get cpu frequency from sysconfig, max frz
  1520. <6>registered taskstats version 1
  1521. registered taskstats version 1
  1522. <6>I2C: i2c-2: HDMI I2C adapter
  1523. I2C: i2c-2: HDMI I2C adapter
  1524. <6>ParseEDID
  1525. ParseEDID
  1526. <6>EDID version: 1.3
  1527. EDID version: 1.3
  1528. <6>PCLK=85500000 X 1360 1424 1536 1792 Y 768 771 777 795 fr 60 PP
  1529. PCLK=85500000 X 1360 1424 1536 1792 Y 768 771 777 795 fr 60 PP
  1530. <6>Using above mode as preferred EDID mode
  1531. Using above mode as preferred EDID mode
  1532. <6>PCLK=68250000 X 1280 1328 1360 1440 Y 768 771 778 790 fr 59 PN
  1533. PCLK=68250000 X 1280 1328 1360 1440 Y 768 771 778 790 fr 59 PN
  1534. <4>Unimplemented SVD code 2
  1535. Unimplemented SVD code 2
  1536. <4>Unimplemented SVD code 6
  1537. Unimplemented SVD code 6
  1538. <4>Unimplemented SVD code 31
  1539. Unimplemented SVD code 31
  1540. <4>Unimplemented SVD code 22
  1541. Unimplemented SVD code 22
  1542. <4>Unimplemented SVD code 17
  1543. Unimplemented SVD code 17
  1544. <4>Unimplemented SVD code 21
  1545. Unimplemented SVD code 21
  1546. <4>Unimplemented SVD code 41
  1547. Unimplemented SVD code 41
  1548. <4>disp_clk: Could not find a matching pll-freq for 53900000 pclk
  1549. disp_clk: Could not find a matching pll-freq for 53900000 pclk
  1550. <4>disp_clk: Could not find a matching pll-freq for 74200000 pclk
  1551. disp_clk: Could not find a matching pll-freq for 74200000 pclk
  1552. <4>disp_clk: Could not find a matching pll-freq for 25150000 pclk
  1553. disp_clk: Could not find a matching pll-freq for 25150000 pclk
  1554. <4>disp_clk: Could not find a matching pll-freq for 53900000 pclk
  1555. disp_clk: Could not find a matching pll-freq for 53900000 pclk
  1556. <4>disp_clk: Could not find a matching pll-freq for 74600000 pclk
  1557. disp_clk: Could not find a matching pll-freq for 74600000 pclk
  1558. <4>disp_clk: Could not find a matching pll-freq for 26150000 pclk
  1559. disp_clk: Could not find a matching pll-freq for 26150000 pclk
  1560. <6>Parse_VideoData_Block: VIC 16 (native) support
  1561. Parse_VideoData_Block: VIC 16 (native) support
  1562. <6>Parse_VideoData_Block: VIC 5 support
  1563. Parse_VideoData_Block: VIC 5 support
  1564. <6>Parse_VideoData_Block: VIC 4 support
  1565. Parse_VideoData_Block: VIC 4 support
  1566. <6>Parse_VideoData_Block: VIC 3 support
  1567. Parse_VideoData_Block: VIC 3 support
  1568. <6>Parse_VideoData_Block: VIC 7 support
  1569. Parse_VideoData_Block: VIC 7 support
  1570. <6>Parse_VideoData_Block: VIC 2 support
  1571. Parse_VideoData_Block: VIC 2 support
  1572. <6>Parse_VideoData_Block: VIC 6 support
  1573. Parse_VideoData_Block: VIC 6 support
  1574. <6>Parse_VideoData_Block: VIC 1 support
  1575. Parse_VideoData_Block: VIC 1 support
  1576. <6>Parse_VideoData_Block: VIC 31 support
  1577. Parse_VideoData_Block: VIC 31 support
  1578. <6>Parse_VideoData_Block: VIC 20 support
  1579. Parse_VideoData_Block: VIC 20 support
  1580. <6>Parse_VideoData_Block: VIC 19 support
  1581. Parse_VideoData_Block: VIC 19 support
  1582. <6>Parse_VideoData_Block: VIC 18 support
  1583. Parse_VideoData_Block: VIC 18 support
  1584. <6>Parse_VideoData_Block: VIC 22 support
  1585. Parse_VideoData_Block: VIC 22 support
  1586. <6>Parse_VideoData_Block: VIC 17 support
  1587. Parse_VideoData_Block: VIC 17 support
  1588. <6>Parse_VideoData_Block: VIC 21 support
  1589. Parse_VideoData_Block: VIC 21 support
  1590. <6>Parse_VideoData_Block: VIC 32 support
  1591. Parse_VideoData_Block: VIC 32 support
  1592. <6>Parse_AudioData_Block: max channel=2
  1593. Parse_AudioData_Block: max channel=2
  1594. <6>Parse_AudioData_Block: SampleRate code=7
  1595. Parse_AudioData_Block: SampleRate code=7
  1596. <6>Parse_AudioData_Block: WordLen code=3
  1597. Parse_AudioData_Block: WordLen code=3
  1598. <6>Find HDMI Vendor Specific DataBlock
  1599. Find HDMI Vendor Specific DataBlock
  1600. <6>PCLK=74250000 X 1280 1720 1760 1980 Y 720 725 730 750 fr 50 PP
  1601. PCLK=74250000 X 1280 1720 1760 1980 Y 720 725 730 750 fr 50 PP
  1602. <6>PCLK=74250000 X 1920 2448 2492 2640 Y 540 542 547 562 fr 50 PP
  1603. PCLK=74250000 X 1920 2448 2492 2640 Y 540 542 547 562 fr 50 PP
  1604. <6>PCLK=27000000 X 720 736 798 858 Y 480 489 495 525 fr 59 NN
  1605. PCLK=27000000 X 720 736 798 858 Y 480 489 495 525 fr 59 NN
  1606. <6>PCLK=27000000 X 720 732 796 864 Y 576 581 586 625 fr 50 NN
  1607. PCLK=27000000 X 720 732 796 864 Y 576 581 586 625 fr 50 NN
  1608. <6>asoc: sndhdmi <-> sunxi-hdmiaudio.0 mapping ok
  1609. asoc: sndhdmi <-> sunxi-hdmiaudio.0 mapping ok
  1610. <6>waited 0 ms for EDID info
  1611. waited 0 ms for EDID info
  1612. <6>disp clks: lcd 85500000 pre_scale 1 hdmi 85500000 pll 171000000 2x 0
  1613. disp clks: lcd 85500000 pre_scale 1 hdmi 85500000 pll 171000000 2x 0
  1614. <6>Console: switching to colour frame buffer device 170x48
  1615. Console: switching to colour frame buffer device 170x48
  1616. <4>axp20_buck3: incomplete constraints, leaving on
  1617. axp20_buck3: incomplete constraints, leaving on
  1618. <4>axp20_buck2: incomplete constraints, leaving on
  1619. axp20_buck2: incomplete constraints, leaving on
  1620. <4>axp20_ldo4: incomplete constraints, leaving on
  1621. axp20_ldo4: incomplete constraints, leaving on
  1622. <4>axp20_ldo3: incomplete constraints, leaving on
  1623. axp20_ldo3: incomplete constraints, leaving on
  1624. <4>axp20_ldo2: incomplete constraints, leaving on
  1625. axp20_ldo2: incomplete constraints, leaving on
  1626. <4>axp20_ldo1: incomplete constraints, leaving on
  1627. axp20_ldo1: incomplete constraints, leaving on
  1628. <6>console [netcon0] enabled
  1629. console [netcon0] enabled
  1630. <6>netconsole: network logging started
  1631. netconsole: network logging started
  1632. <6>sunxi-rtc sunxi-rtc: setting system clock to 2010-01-01 00:00:00 UTC (126230)
  1633. sunxi-rtc sunxi-rtc: setting system clock to 2010-01-01 00:00:00 UTC (126230400)
  1634. <6>ALSA device list:
  1635. ALSA device list:
  1636. <6> #0: sunxi-CODEC Audio Codec
  1637. #0: sunxi-CODEC Audio Codec
  1638. <6> #1: sunxi-sndhdmi
  1639. #1: sunxi-sndhdmi
  1640. <6>Waiting for root device /dev/mmcblk1p2...
  1641. Waiting for root device /dev/mmcblk1p2...
Add Comment
Please, Sign In to add comment