API tools faq
paste
rayddteam

FreeBSD on Octeon CN5010 (D-Link DSR-500)

rayddteam
Oct 28th, 2011
630
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 19.50 KB | None | 0 0
raw download clone embed print report
  1. U-Boot 1.1.1 (Development build, svnversion: exported) (Build time: Sep 1 2010 - 16:27:47)
  2.  
  3. Warning: Board descriptor tuple not found in eeprom, using defaults
  4. CUST_DSR500 board revision major:2, minor:0, serial #: unknown
  5. OCTEON CN5010-SCP pass 1.1, Core clock: 300 MHz, DDR clock: 200 MHz (400 Mhz data rate)
  6. PAL rev: 0.00, MCU rev: 0.00, CPU voltage: 0.00
  7. DRAM: 128 MB
  8. Flash: 32 MB
  9. Clearing DRAM...... done
  10. BIST check passed.
  11. Starting PCI
  12. PCI Status: PCI 32-bit
  13. PCI BAR 0: 0x00000000, PCI BAR 1: Memory 0x00000000 PCI 0xf8000000
  14. Net: octeth0, octeth1, octeth2
  15.  
  16. Hit any key to stop autoboot: 0
  17. D-Link DSR-500 bootloader# run bsd
  18. Interface 0 has 3 ports (RGMII)
  19. Using octeth0 device
  20. TFTP from server 192.168.0.90; our IP address is 192.168.0.10
  21. Filename 'DSR-1000N/boot/kernel/kernel'.
  22. Load address: 0x5500000
  23. Loading: octeth0: Up 1000 Mbps Full duplex (port 0)
  24. #################################################################
  25. ###########
  26. done
  27. Bytes transferred = 10838150 (a56086 hex), 4861 Kbytes/sec
  28. argv[2]: numcores=1
  29. ELF file is 64 bit
  30. Attempting to allocate memory for ELF segment: addr: 0xffffffff80100080 (adjusted to: 0x0000000000100080), size 0xaef7e0
  31. Allocated memory for ELF segment: addr: 0xffffffff80100080, size 0xaef7e0
  32. Loading .text @ 0xffffffff80100080 (0x6a7f80 bytes)
  33. Loading .MIPS.stubs @ 0xffffffff807a8000 (0x10 bytes)
  34. Loading .rodata @ 0xffffffff807aa000 (0x45de0 bytes)
  35. Loading .MIPS.options @ 0xffffffff807efde0 (0x8ea8 bytes)
  36. Loading .rodata.str1.8 @ 0xffffffff807f8c88 (0x8e7a8 bytes)
  37. Loading set_sysctl_set @ 0xffffffff80887430 (0x2d78 bytes)
  38. Loading .interp @ 0xffffffff8088a1a8 (0xd bytes)
  39. Loading .dynsym @ 0xffffffff8088a1b8 (0x35cd0 bytes)
  40. Loading .dynstr @ 0xffffffff808bfe88 (0x25b32 bytes)
  41. Loading .hash @ 0xffffffff808e59c0 (0x10fc4 bytes)
  42. Loading set_sysinit_set @ 0xffffffff808f6988 (0x1a30 bytes)
  43. Loading set_sysuninit_set @ 0xffffffff808f83b8 (0xc98 bytes)
  44. Loading set_modmetadata_set @ 0xffffffff808f9050 (0xf38 bytes)
  45. Loading set_kdb_dbbe_set @ 0xffffffff808f9f88 (0x10 bytes)
  46. Loading set_ah_chips @ 0xffffffff808f9f98 (0x48 bytes)
  47. Loading set_ah_rfs @ 0xffffffff808f9fe0 (0x28 bytes)
  48. Loading set_cons_set @ 0xffffffff808fa008 (0x18 bytes)
  49. Loading usb_host_id @ 0xffffffff808fa020 (0x9ca0 bytes)
  50. Loading usb_dual_id @ 0xffffffff80903cc0 (0x60 bytes)
  51. Loading set_ratectl_set @ 0xffffffff80903d20 (0x10 bytes)
  52. Loading set_crypto_set @ 0xffffffff80903d30 (0x18 bytes)
  53. Loading set_ieee80211_ioctl_setset @ 0xffffffff80903d48 (0x18 bytes)
  54. Loading set_ieee80211_ioctl_getset @ 0xffffffff80903d60 (0x18 bytes)
  55. Loading set_scanner_set @ 0xffffffff80903d78 (0x28 bytes)
  56. Loading kern_conf @ 0xffffffff80903da0 (0x8c8 bytes)
  57. Loading .data @ 0xffffffff80906000 (0xa5a00 bytes)
  58. Loading .got @ 0xffffffff809aba00 (0x4a08 bytes)
  59. Loading .rld_map @ 0xffffffff809b0408 (0x4 bytes)
  60. Loading set_pcpu @ 0xffffffff809b0440 (0xda4 bytes)
  61. Loading .sdata @ 0xffffffff809b11e4 (0x1c bytes)
  62. Clearing .bss @ 0xffffffff809b1200 (0x23e660 bytes)
  63. ## Loading Linux kernel with entry point: 0xffffffff80100080 ...
  64. Bootloader: Done loading app on coremask: 0x1
  65. Boot Descriptor Ver: 6 -> 1/2 CPU clock: 300MHz Core Mask: 0
  66. Board Type: 20015 Revision: 2/0
  67. Mac Address 00.DE.AD.20.75.00 (255)
  68. Board: CUST_DLINK_DSR500
  69. Model: CN5010p1.1-300-SCP
  70. Cache info:
  71. picache_stride = 4096
  72. picache_loopcount = 8
  73. pdcache_stride = 256
  74. pdcache_loopcount = 64
  75. cpu0: Cavium processor v1.6
  76. MMU: Standard TLB, 64 entries
  77. L1 i-cache: 4 ways of 64 sets, 128 bytes per line
  78. L1 d-cache: 64 ways of 2 sets, 128 bytes per line
  79. Config1=0xfe3303da<COP2,PerfCount,WatchRegs,EJTAG>
  80. Config3=0x1080
  81. Physical memory chunk(s):
  82. 0xbf0000 - 0x7eeffff, 120586240 bytes (29440 pages)
  83. Maxmem is 0x7ef0000
  84. pcpu is available at virtual address 0xc000000000000000.
  85. KDB: debugger backends: ddb
  86. KDB: current backend: ddb
  87. Octeon SDK: Cavium Networks Octeon SDK version 2.0.0, build 366
  88. Available Octeon features: SAAD CRYPTO USB
  89. Copyright (c) 1992-2011 The FreeBSD Project.
  90. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
  91. The Regents of the University of California. All rights reserved.
  92. FreeBSD is a registered trademark of The FreeBSD Foundation.
  93. FreeBSD 10.0-CURRENT #97 r0:226680M: Fri Oct 28 14:58:38 EEST 2011
  94. [email protected]:/usr/obj/mips.mips64eb/usr/1/MIPS_FreeBSD/HEAD/head/sys/OCTEON1 mips
  95. WARNING: WITNESS option enabled, expect reduced performance.
  96. real memory = 120586240 (117760K bytes)
  97. Physical memory chunk(s):
  98. 0x00d0d000 - 0x07b57fff, 115650560 bytes (28235 pages)
  99. avail memory = 113057792 (107MB)
  100. ULE: setup cpu 0
  101. wlan: <802.11 Link Layer>
  102. mem: <memory>
  103. crypto: <crypto core>
  104. random: <entropy source, Software, Yarrow>
  105. nfslock: pseudo-device
  106. null: <null device, zero device>
  107. nexus0: <MIPS32 root nexus>
  108. clock0: <Generic MIPS32 ticker> on nexus0
  109. Timecounter "MIPS32" frequency 300000000 Hz quality 800
  110. Event timer "MIPS32" frequency 300000000 Hz quality 800
  111. rnd0: <Cavium Octeon Random Number Generator> on nexus0
  112. cryptocteon0: <Octeon Secure Coprocessor> on nexus0
  113. crypto: assign cryptocteon0 driver id 0, flags 83886080
  114. crypto: cryptocteon0 registers alg 6 flags 0 maxoplen 0
  115. crypto: cryptocteon0 registers alg 7 flags 0 maxoplen 0
  116. crypto: cryptocteon0 registers alg 1 flags 0 maxoplen 0
  117. crypto: cryptocteon0 registers alg 2 flags 0 maxoplen 0
  118. crypto: cryptocteon0 registers alg 11 flags 0 maxoplen 0
  119. ciu0: <Cavium Octeon Central Interrupt Unit> on nexus0
  120. obio0 on ciu0
  121. uart1: <Octeon-16550 channel 1> on obio0
  122. uart1: fast interrupt
  123. uart1: console (115200,n,8,1)
  124. uart0: <Octeon-16550 channel 0> on obio0
  125. uart0: fast interrupt
  126. uart0: console (115200,n,8,1)
  127. octebus0: <Cavium Octeon Ethernet pseudo-bus> on ciu0
  128. cavium-ethernet: Cavium Networks Octeon SDK version 2.0.0, build 366
  129. Interface 0 has 3 ports (RGMII)
  130. Warning: Enabling IPD when IPD already enabled.
  131. Warning: Enabling PKO when PKO already enabled.
  132. octe0: <Cavium Octeon RGMII Ethernet> on octebus0
  133. DUMP PHY0:
  134. 1140 796d 0143 bf88 0de1 41e1 0067 2001 0000 0f00 0000 0000 0000 0000 0000 3000
  135. 0000 0301 0000 0000 0000 0028 0000 0f75 0c00 f514 040e ffff 0000 03ca 0000 0000
  136.  
  137. DUMP PHY1:
  138. 1140 7949 0143 bf88 0de1 0000 0064 2001 0000 0f00 0000 0000 0000 0000 0000 3000
  139. 0000 2000 0000 0000 0000 0028 0000 0f75 0c00 1000 0000 ffff 0000 0000 0000 0000
  140.  
  141. DUMP PHY2:
  142. 1140 7949 0143 bf88 0de1 0000 0064 2001 0000 0f00 0000 0000 0000 0000 0000 3000
  143. 0000 2000 0000 0000 0000 0028 0000 0f75 0c00 1000 0000 ffff 2c4e 0000 0000 0000
  144.  
  145. DUMP PHY3:
  146. 1140 7949 0143 bf88 0de1 0000 0064 2001 0000 0f00 0000 0000 0000 0000 0000 3000
  147. 0000 0000 0000 0000 0000 0028 0000 0f75 0c00 1000 0000 ffff 2c60 0000 0000 0000
  148.  
  149. DUMP PHY4:
  150. 1140 796d 0143 bf88 0de1 41e1 0067 2001 0000 0f00 0000 0000 0000 0000 0000 3000
  151. 0000 0301 0000 0000 0000 0028 0000 0f75 0c00 f514 040e ffff 0000 0745 0000 0000
  152.  
  153. DUMP PHY5:
  154. 1140 0149 0143 bff0 01e0 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 c000
  155. 0190 0007 0042 0001 0011 0881 03c0 0000 0000 0000 0820 0000 0000 017c 0289 0000
  156.  
  157. DUMP PHY8:
  158. 1140 7949 0143 bca2 01e1 0000 0064 2001 0000 0200 0000 0000 0000 0000 0000 3000
  159. 0000 2000 0000 0000 0000 0000 0000 0000 0400 1000 0000 ffff 3833 0000 0000 0000
  160.  
  161. miibus0: <MII bus> on octe0
  162. ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0
  163. ukphy0: OUI 0x000af7, model 0x0038, rev. 8
  164. ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
  165. ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
  166. ukphy1: OUI 0x000af7, model 0x0038, rev. 8
  167. ukphy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
  168. ukphy2: <Generic IEEE 802.3u media interface> PHY 2 on miibus0
  169. ukphy2: OUI 0x000af7, model 0x0038, rev. 8
  170. ukphy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
  171. ukphy3: <Generic IEEE 802.3u media interface> PHY 3 on miibus0
  172. ukphy3: OUI 0x000af7, model 0x0038, rev. 8
  173. ukphy3: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
  174. ukphy4: <Generic IEEE 802.3u media interface> PHY 4 on miibus0
  175. ukphy4: OUI 0x000af7, model 0x0038, rev. 8
  176. ukphy4: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
  177. brgphy0: <BCM5709S 1000/2500baseSX PHY> PHY 5 on miibus0
  178. brgphy0: OUI 0x000af7, model 0x003f, rev. 0
  179. brgphy0: 1000baseSX-FDX, auto
  180. ukphy5: <Generic IEEE 802.3u media interface> PHY 8 on miibus0
  181. ukphy5: OUI 0x000af7, model 0x000a, rev. 2
  182. ukphy5: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
  183. MAC: 00:de:ad:20:75:00
  184. octe0: bpf attached
  185. octe0: Ethernet address: 00:de:ad:20:75:00
  186. octe1: <Cavium Octeon RGMII Ethernet> on octebus0
  187. DUMP PHY0:
  188. 1140 7949 0143 bf88 0de1 0000 0064 2001 0000 0f00 0000 0000 0000 0000 0000 3000
  189. 0000 0001 0000 0000 0000 0000 0000 0000 0400 0000 0000 ffff 0000 0000 0000 0000
  190.  
  191. DUMP PHY1:
  192. 1540 7949 0143 bf88 0de1 0000 0064 2001 0000 0f00 0000 0000 0000 0000 0000 3000
  193. 0000 0000 0000 0000 0000 0000 0000 0000 0400 0000 0000 ffff 0000 0000 0000 0000
  194.  
  195. DUMP PHY2:
  196. 1540 7949 0143 bf88 0de1 0000 0064 2001 0000 0f00 0000 0000 0000 0000 0000 3000
  197. 0000 0000 0000 0000 0000 0000 0000 0000 0400 0000 0000 ffff 0000 0000 0000 0000
  198.  
  199. DUMP PHY3:
  200. 1540 7949 0143 bf88 0de1 0000 0064 2001 0000 0f00 0000 0000 0000 0000 0000 3000
  201. 0000 0000 0000 0000 0000 0000 0000 0000 0400 0000 0000 ffff 0000 0000 0000 0000
  202.  
  203. DUMP PHY4:
  204. 1540 7949 0143 bf88 0de1 0000 0064 2001 0000 0f00 0000 0000 0000 0000 0000 3000
  205. 0000 0001 0000 0000 0000 0000 0000 0000 0400 0000 0000 ffff 0000 0000 0000 0000
  206.  
  207. DUMP PHY5:
  208. 1140 0149 0143 bff0 01e0 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 c000
  209. 0190 0007 0042 0001 0011 0881 03c0 0000 0000 0000 0820 0000 0000 017c 0289 0000
  210.  
  211. DUMP PHY8:
  212. 1540 7949 0143 bca2 01e1 0000 0064 2001 0000 0200 0000 0000 0000 0000 0000 3000
  213. 0000 0000 0000 0000 0000 0000 0000 0000 0400 0000 0000 ffff 0000 0000 0000 0000
  214.  
  215. miibus1: <MII bus> on octe1
  216. ukphy6: <Generic IEEE 802.3u media interface> PHY 0 on miibus1
  217. ukphy6: OUI 0x000af7, model 0x0038, rev. 8
  218. ukphy6: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
  219. ukphy7: <Generic IEEE 802.3u media interface> PHY 1 on miibus1
  220. ukphy7: OUI 0x000af7, model 0x0038, rev. 8
  221. ukphy7: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
  222. ukphy8: <Generic IEEE 802.3u media interface> PHY 2 on miibus1
  223. ukphy8: OUI 0x000af7, model 0x0038, rev. 8
  224. ukphy8: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
  225. ukphy9: <Generic IEEE 802.3u media interface> PHY 3 on miibus1
  226. ukphy9: OUI 0x000af7, model 0x0038, rev. 8
  227. ukphy9: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
  228. ukphy10: <Generic IEEE 802.3u media interface> PHY 4 on miibus1
  229. ukphy10: OUI 0x000af7, model 0x0038, rev. 8
  230. ukphy10: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
  231. brgphy1: <BCM5709S 1000/2500baseSX PHY> PHY 5 on miibus1
  232. brgphy1: OUI 0x000af7, model 0x003f, rev. 0
  233. brgphy1: 1000baseSX-FDX, auto
  234. ukphy11: <Generic IEEE 802.3u media interface> PHY 8 on miibus1
  235. ukphy11: OUI 0x000af7, model 0x000a, rev. 2
  236. ukphy11: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
  237. MAC: 00:de:ad:20:75:00
  238. octe1: bpf attached
  239. octe1: Ethernet address: 00:de:ad:20:75:00
  240. octe2: <Cavium Octeon RGMII Ethernet> on octebus0
  241. DUMP PHY8:
  242. 1540 7949 0143 bca2 01e1 0000 0064 2001 0000 0200 0000 0000 0000 0000 0000 3000
  243. 0000 0000 0000 0000 0000 0000 0000 0000 0400 0000 0000 ffff 0000 0000 0000 0000
  244.  
  245. miibus2: <MII bus> on octe2
  246. ukphy12: <Generic IEEE 802.3u media interface> PHY 8 on miibus2
  247. ukphy12: OUI 0x000af7, model 0x000a, rev. 2
  248. ukphy12: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
  249. MAC: 00:de:ad:20:75:00
  250. octe2: bpf attached
  251. octe2: Ethernet address: 00:de:ad:20:75:00
  252. pcib0: <Cavium Octeon PCI bridge> on ciu0
  253. pcib0: 32-bit PCI bus.
  254. pci0: <PCI bus> on pcib0
  255. pci0: domain=0, physical bus=0
  256. dotg0: <DWC like USB OTG controller> on ciu0
  257. dotg_init: READ4 from GSNPSID_REG 0x4f54265a
  258. dotg_init: READ4 from GSNPSID_REG+4 0x00000000
  259. usbus0 on dotg0
  260. usbus0: bpf attached
  261. dotg0: usbpf: Attached
  262. cfi_do_query: query at 0 with mask 0xff (w=1, s=2)
  263. cfi_do_query: cfi_read(sc, ofs, CFI_QRY_IDENT) return 0x51
  264. cfi0: detected with bus width = 1, address shift = 2
  265. cfi0: CFI Flash Manufacturer ID = 0x10, Device ID 0x01
  266. cfi0: Array mask = 0xff
  267. cfi0: <AMD/Fujitsu - 32MB> on ciu0
  268. cfi0:
  269. cfi0: [256x128KB]
  270. cfid0 on cfi0
  271. rtc0: <Cavium Octeon Realtime Clock> on nexus0
  272. rtc0: registered as a time-of-day clock (resolution 1000000us, adjustment 0.500000000s)
  273. cryptosoft0: <software crypto> on nexus0
  274. crypto: assign cryptosoft0 driver id 1, flags 100663296
  275. crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0
  276. crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0
  277. crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0
  278. crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0
  279. crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0
  280. crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0
  281. crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0
  282. crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0
  283. crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0
  284. crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0
  285. crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0
  286. crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0
  287. crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0
  288. crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0
  289. crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0
  290. crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0
  291. crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0
  292. crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0
  293. crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0
  294. crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0
  295. crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0
  296. Device configuration finished.
  297. procfs registered
  298. Timecounter "Octeon" frequency 300000000 Hz quality 900
  299. Timecounters tick every 10.000 msec
  300. crypto: <crypto device>
  301. vlan: initialized, using hash tables with chaining
  302. IPsec: Initialized Security Association Processing.
  303. lo0: bpf attached
  304. GEOM: new disk cfid0
  305. usbus0: 480Mbps High Speed USB v2.0
  306. ugen0.1: <DWC> at usbus0
  307. uhub0: <DWC OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
  308. MAP: 0xa0000, data=0xa0000 "/dev/map/bootloader"
  309. MAP: a0000x900000, data=0x900000 "/dev/map/kernel"
  310. MAP: 9a0000x1400000, data=0x1400000 "/dev/map/rootfs"
  311. MAP: 1da0000x200000, data=0x200000 "/dev/map/config"
  312. MAP: 1fa0000x20000, data=0x20000 "/dev/map/bootloader-env"
  313. MAP: 1fc0000x40000, data=0x40000 "/dev/map/XXX"
  314. MAP: a0000x1d00000, data=0x1d00000 "/dev/map/upgrade"
  315. uhub0: 1 port with 1 removable, self powered
  316. bootpc_init: wired to interface 'octe0'
  317. miibus0: mii_mediachg: can't handle non-zero PHY instance 5
  318. octe0: link state changed to UP
  319. Sending DHCP Discover packet from interface octe0 (00:de:ad:20:75:00)
  320. Received DHCP Offer packet on octe0 from 0.0.0.0 (accepted) (no root path)
  321. ugen0.2: <Kingston> at usbus0
  322. umass0: <Kingston DT 101 II, class 0/0, rev 2.00/1.10, addr 2> on usbus0
  323. umass0:0:0:-1: Attached to scbus0
  324. (probe0:umass-sim0:0:0:0): Down reving Protocol Version from 2 to 0?
  325. pass0 at umass-sim0 bus 0 scbus0 target 0 lun 0
  326. pass0: <Kingston DT 101 II PMAP> Removable Direct Access SCSI-0 device
  327. pass0: Serial Number 0019E00149F7B9B1E000010C
  328. pass0: 40.000MB/s transfers
  329. da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
  330. da0: <Kingston DT 101 II PMAP> Removable Direct Access SCSI-0 device
  331. da0: Serial Number 0019E00149F7B9B1E000010C
  332. da0: 40.000MB/s transfers
  333. da0: 3827MB (7837696 512 byte sectors: 255H 63S/T 487C)
  334. GEOM: new disk da0
  335. MAP: No valid partition found at da0
  336. MAP: No valid partition found at da0s1
  337. MAP: No valid partition found at da0s2
  338. MAP: No valid partition found at da0s3
  339. MAP: No valid partition found at da0s4
  340. MAP: No valid partition found at da0s2a
  341. Sending DHCP Request packet from interface octe0 (00:de:ad:20:75:00)
  342. Received DHCP Ack packet on octe0 from 0.0.0.0 (accepted) (got root path)
  343. octe0 at 192.168.0.31 server 0.0.0.0
  344. subnet mask 255.255.255.0 router 192.168.0.90 rootfs 192.168.0.90:/usr/obj/MIPS64BE
  345. Adjusted interface octe0
  346. WARNING: WITNESS option enabled, expect reduced performance.
  347. Trying to mount root from nfs: []...
  348. NFS ROOT: 192.168.0.90:/usr/obj/MIPS64BE
  349. start_init: trying /sbin/init
  350. Interface octe0 IP-Address 192.168.0.31 Broadcast 192.168.0.255
  351. Setting hostuuid: 18b36f8a-1dd2-11b2-9501-00dead207500.
  352. Setting hostid: 0xd225c13e.
  353. No suitable dump device was found.
  354. Entropy harvesting: interrupts ethernet point_to_point kickstart.
  355. Starting file system checks:
  356. mount_nfs: can't update /var/db/mounttab for 192.168.0.90:/usr/obj/MIPS64BE
  357. Mounting local file systems:.
  358. Setting hostname: DSR-1000N.
  359. Starting Network: lo0 octe0 octe1 octe2.
  360. lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
  361. options=3<RXCSUM,TXCSUM>
  362. inet 127.0.0.1 netmask 0xff000000
  363. inet6 ::1 prefixlen 128
  364. inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
  365. nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
  366. octe0: flags=8a43<UP,BROADCAST,RUNNING,ALLMULTI,SIMPLEX,MULTICAST> metric 0 mtu 1500
  367. options=b<RXCSUM,TXCSUM,VLAN_MTU>
  368. ether 00:de:ad:20:75:00
  369. inet6 fe80::2de:adff:fe20:7500%octe0 prefixlen 64 tentative scopeid 0x1
  370. inet 192.168.0.31 netmask 0xffffff00 broadcast 192.168.0.255
  371. nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
  372. media: Ethernet autoselect (100baseTX <full-duplex>)
  373. status: active
  374. octe1: flags=8a02<BROADCAST,ALLMULTI,SIMPLEX,MULTICAST> metric 0 mtu 1500
  375. options=b<RXCSUM,TXCSUM,VLAN_MTU>
  376. ether 00:de:ad:2octe1: link state changed to UP
  377. 0:75:00
  378. media: Ethernet autoselect (100baseTX <full-duplex>)
  379. status: active
  380. octe2: flags=8a02<BROADCAST,ALLMULTI,SIMPLEX,MULTICAST> metric 0 mtu 1500
  381. options=b<RXCSUM,TXCSUM,VLAN_MTU>
  382. ether 00:de:ad:20:75:00
  383. media: Ethernet autoselect (none)
  384. Starting devd.
  385. Starting Network: octe1.
  386. octe1: flags=8a02<BROADCAST,ALLMULTI,SIMPLEX,MULTICAST> metric 0 mtu 1500
  387. options=b<RXCSUM,TXCSUM,VLAN_MTU>
  388. ether 00:de:ad:20:75:00
  389. media: Ethernet autoselect (100baseTX <full-duplex>)
  390. status: active
  391. Starting Network: octe2.
  392. octe2: flags=8a02<BROADCAST,ALLMULTI,SIMPLEX,MULTICAST> metric 0 mtu 1500
  393. options=b<RXCSUM,TXCSUM,VLAN_MTU>
  394. ether 00:de:ad:20:75:00
  395. media: Ethernet autoselect (none)
  396. Starting Network: usbus0.
  397. devd: cannot open pid file: Operation not supported
  398. add net ::ffff:0.0.0.0: gateway ::1
  399. add net ::0.0.0.0: gateway ::1
  400. add net fe80::: gateway ::1
  401. add net ff02::: gateway ::1
  402. Creating and/or trimming log files.
  403. Starting syslogd.
  404. syslogd: cannot open pid file: Operation not supported
  405. /etc/rc: WARNING: Dump device does not exist. Savecore not run.
  406. ELF ldconfig path: /lib /usr/lib /usr/lib/compat
  407. Clearing /tmp (X related).
  408. Updating motd:.
  409. Starting cron.
  410. cron: can't open or create /var/run/cron.pid: Operation not supported
  411. /etc/rc: WARNING: failed to start cron
  412. Starting background file system checks in 60 seconds.
  413.  
  414. Wed Jun 8 17:34:54 UTC 2011
  415.  
  416. FreeBSD/mips (DSR-1000N) (ttyu0)
  417.  
  418. login:
  419.  
  420.  
  421.  
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!