# All paths in this configuration file are relative to Dynmap's data-folder: minecraft_server/dynmap/

# All map templates are defined in the templates directory
# To use the HDMap very-low-res (2 ppb) map templates as world defaults, set value to vlowres
#   The definitions of these templates are in normal-vlowres.txt, nether-vlowres.txt, and the_end-vlowres.txt
# To use the HDMap low-res (4 ppb) map templates as world defaults, set value to lowres
#   The definitions of these templates are in normal-lowres.txt, nether-lowres.txt, and the_end-lowres.txt
# To use the HDMap hi-res (16 ppb) map templates (these can take a VERY long time for initial fullrender), set value to hires
#   The definitions of these templates are in normal-hires.txt, nether-hires.txt, and the_end-hires.txt
# To use the HDMap low-res (4 ppb) map templates, with support for boosting resolution selectively to hi-res (16 ppb), set value to low_boost_hi
#   The definitions of these templates are in normal-low_boost_hi.txt, nether-low_boost_hi.txt, and the_end-low_boost_hi.txt
# To use the HDMap hi-res (16 ppb) map templates, with support for boosting resolution selectively to vhi-res (32 ppb), set value to hi_boost_vhi
#   The definitions of these templates are in normal-hi_boost_vhi.txt, nether-hi_boost_vhi.txt, and the_end-hi_boost_vhi.txt
# To use the HDMap hi-res (16 ppb) map templates, with support for boosting resolution selectively to xhi-res (64 ppb), set value to hi_boost_xhi
#   The definitions of these templates are in normal-hi_boost_xhi.txt, nether-hi_boost_xhi.txt, and the_end-hi_boost_xhi.txt
deftemplatesuffix: xlowres

# Set default tile scale (0 = 128px x 128x, 1 = 256px x 256px, 2 = 512px x 512px, 3 = 1024px x 1024px, 4 = 2048px x 2048px) - 0 is default
# Note: changing this value will result in all maps that use the default value being required to be fully rendered
#defaulttilescale: 0

# Map storage scheme: only uncommoent one 'type' value
#  filetree: classic and default scheme: tree of files, with all map data under the directory indicated by 'tilespath' setting
#  sqlite: single SQLite database file (this can get VERY BIG), located at 'dbfile' setting (default is file dynmap.db in data directory)
#  mysql: MySQL database, at hostname:port in database, accessed via userid with password
#  mariadb: MariaDB database, at hostname:port in database, accessed via userid with password
#  postgres: PostgreSQL database, at hostname:port in database, accessed via userid with password
storage:
  # Filetree storage (standard tree of image files for maps)
  type: filetree
  # SQLite db for map storage (uses dbfile as storage location)
  #type: sqlite
  #dbfile: dynmap.db
  # MySQL DB for map storage (at 'hostname':'port' in database 'database' using user 'userid' password 'password' and table prefix 'prefix'
  #type: mysql
  #hostname: localhost
  #port: 3306
  #database: dynmap
  #userid: dynmap
  #password: dynmap
  #prefix: ""
  #
  # AWS S3 backet web site
  #type: aws_s3
  #bucketname: "dynmap-bucket-name"
  #region: us-east-1
  #aws_access_key_id: "<aws-access-key-id>"
  #aws_secret_access_key: "<aws-secret-access-key>"
  #prefix: ""

components:
  - class: org.dynmap.ClientConfigurationComponent

  # Remember to change the following class to org.dynmap.JsonFileClientUpdateComponent when using an external web server.
  - class: org.dynmap.InternalClientUpdateComponent
    sendhealth: true
    sendposition: true
    allowwebchat: true
    webchat-interval: 5
    hidewebchatip: false
    trustclientname: false
    includehiddenplayers: false
    # (optional) if true, color codes in player display names are used
    use-name-colors: false
    # (optional) if true, player login IDs will be used for web chat when their IPs match
    use-player-login-ip: true
    # (optional) if use-player-login-ip is true, setting this to true will cause chat messages not matching a known player IP to be ignored
    require-player-login-ip: false
    # (optional) block player login IDs that are banned from chatting
    block-banned-player-chat: true
    # Require login for web-to-server chat (requires login-enabled: true)
    webchat-requires-login: false
    # If set to true, users must have dynmap.webchat permission in order to chat
    webchat-permissions: false
    # Limit length of single chat messages
    chatlengthlimit: 256
  #  # Optional - make players hidden when they are inside/underground/in shadows (#=light level: 0=full shadow,15=sky)
  #  hideifshadow: 4
  #  # Optional - make player hidden when they are under cover (#=sky light level,0=underground,15=open to sky)
  #  hideifundercover: 14
  #  # (Optional) if true, players that are crouching/sneaking will be hidden
    hideifsneaking: false
    # If true, player positions/status is protected (login with ID with dynmap.playermarkers.seeall permission required for info other than self)
    protected-player-info: false
    # If true, hide players with invisibility potion effects active
    hide-if-invisiblity-potion: true
    # If true, player names are not shown on map, chat, list
    hidenames: false
  #- class: org.dynmap.JsonFileClientUpdateComponent
  #  writeinterval: 1
  #  sendhealth: true
  #  sendposition: true
  #  allowwebchat: true
  #  webchat-interval: 5
  #  hidewebchatip: false
  #  includehiddenplayers: false
  #  use-name-colors: false
  #  use-player-login-ip: false
  #  require-player-login-ip: false
  #  block-banned-player-chat: true
  #  hideifshadow: 0
  #  hideifundercover: 0
  #  hideifsneaking: false
  #  # Require login for web-to-server chat (requires login-enabled: true)
  #  webchat-requires-login: false
  #  # If set to true, users must have dynmap.webchat permission in order to chat
  #  webchat-permissions: false
  #  # Limit length of single chat messages
  #  chatlengthlimit: 256
  #  hide-if-invisiblity-potion: true
  #  hidenames: false

  - class: org.dynmap.SimpleWebChatComponent
    allowchat: true
    # If true, web UI users can supply name for chat using 'playername' URL parameter.  'trustclientname' must also be set true.
    allowurlname: false

  # Note: this component is needed for the dmarker commands, and for the Marker API to be available to other plugins
  - class: org.dynmap.MarkersComponent
    type: markers
    showlabel: false
    enablesigns: false
    # Default marker set for sign markers
    default-sign-set: markers
    # (optional) add spawn point markers to standard marker layer
    showspawn: true
    spawnicon: world
    spawnlabel: "Spawn"
    # (optional) layer for showing offline player's positions (for 'maxofflinetime' minutes after logoff)
    showofflineplayers: false
    offlinelabel: "Offline"
    offlineicon: offlineuser
    offlinehidebydefault: true
    offlineminzoom: 0
    maxofflinetime: 30
    # (optional) layer for showing player's spawn beds
    showspawnbeds: false
    spawnbedlabel: "Spawn Beds"
    spawnbedicon: bed
    spawnbedhidebydefault: true
    spawnbedminzoom: 0
    spawnbedformat: "%name%'s bed"
    # (optional) Show world border (vanilla 1.8+)
    showworldborder: true
    worldborderlabel: "Border"

  - class: org.dynmap.ClientComponent
    type: chat
    allowurlname: false
  - class: org.dynmap.ClientComponent
    type: chatballoon
    focuschatballoons: false
  - class: org.dynmap.ClientComponent
    type: chatbox
    showplayerfaces: true
    messagettl: 5
    # Optional: set number of lines in scrollable message history: if set, messagettl is not used to age out messages
    #scrollback: 100
    # Optional: set maximum number of lines visible for chatbox
    #visiblelines: 10
    # Optional: send push button
    sendbutton: false
  - class: org.dynmap.ClientComponent
    type: playermarkers
    showplayerfaces: true
    showplayerhealth: true
    # If true, show player body too (only valid if showplayerfaces=true)
    showplayerbody: false
    # Option to make player faces small - don't use with showplayerhealth or largeplayerfaces
    smallplayerfaces: false
    # Option to make player faces larger - don't use with showplayerhealth or smallplayerfaces
    largeplayerfaces: false
    # Optional - make player faces layer hidden by default
    hidebydefault: false
    # Optional - ordering priority in layer menu (low goes before high - default is 0)
    layerprio: 0
    # Optional - label for player marker layer (default is 'Players')
    label: "Players"

  #- class: org.dynmap.ClientComponent
  #  type: digitalclock
  - class: org.dynmap.ClientComponent
    type: link

  - class: org.dynmap.ClientComponent
    type: timeofdayclock
    showdigitalclock: true
    #showweather: true
  # Mouse pointer world coordinate display
  - class: org.dynmap.ClientComponent
    type: coord
    label: "Location"
    hidey: false
    show-mcr: false
    show-chunk: false

  # Note: more than one logo component can be defined
  #- class: org.dynmap.ClientComponent
  #  type: logo
  #  text: "Dynmap"
  #  #logourl: "images/block_surface.png"
  #  linkurl: "http://forums.bukkit.org/threads/dynmap.489/"
  #  # Valid positions: top-left, top-right, bottom-left, bottom-right
  #  position: bottom-right

  #- class: org.dynmap.ClientComponent
  #  type: inactive
  #  timeout: 1800 # in seconds (1800 seconds = 30 minutes)
  #  redirecturl: inactive.html
  #  #showmessage: 'You were inactive for too long.'

  #- class: org.dynmap.TestComponent
  #  stuff: "This is some configuration-value"

# Treat hiddenplayers.txt as a whitelist for players to be shown on the map? (Default false)
display-whitelist: false

# How often a tile gets rendered (in seconds).
renderinterval: 1

# How many tiles on update queue before accelerate render interval
renderacceleratethreshold: 60

# How often to render tiles when backlog is above renderacceleratethreshold
renderaccelerateinterval: 0.2

# How many update tiles to work on at once (if not defined, default is 1/2 the number of cores)
tiles-rendered-at-once: 2

# If true, use normal priority threads for rendering (versus low priority) - this can keep rendering
# from starving on busy Windows boxes (Linux JVMs pretty much ignore thread priority), but may result
# in more competition for CPU resources with other processes
usenormalthreadpriority: true

# Save and restore pending tile renders - prevents their loss on server shutdown or /reload
saverestorepending: true

# Save period for pending jobs (in seconds): periodic saving for crash recovery of jobs
save-pending-period: 900

# Zoom-out tile update period - how often to scan for and process tile updates into zoom-out tiles (in seconds)
zoomoutperiod: 30

# Control whether zoom out tiles are validated on startup (can be needed if zoomout processing is interrupted, but can be expensive on large maps)
initial-zoomout-validate: true

# Default delay on processing of updated tiles, in seconds.  This can reduce potentially expensive re-rendering
# of frequently updated tiles (such as due to machines, pistons, quarries or other automation).  Values can
# also be set on individual worlds and individual maps.
tileupdatedelay: 30

# Tile hashing is used to minimize tile file updates when no changes have occurred - set to false to disable
enabletilehash: true

# Optional - hide ores: render as normal stone (so that they aren't revealed by maps)
#hideores: true

# Optional - enabled BetterGrass style rendering of grass and snow block sides
#better-grass: true

# Optional - enable smooth lighting by default on all maps supporting it (can be set per map as lighting option)
smooth-lighting: true

# Optional - use world provider lighting table (good for custom worlds with custom lighting curves, like nether)
#   false=classic Dynmap lighting curve
use-brightness-table: true

# Optional - render specific block names using the textures and models of another block name: can be used to hide/disguise specific
#  blocks (e.g. make ores look like stone, hide chests) or to provide simple support for rendering unsupported custom blocks
block-alias:
#    "minecraft:quartz_ore": "stone"
#    "diamond_ore": "coal_ore"

# Default image format for HDMaps (png, jpg, jpg-q75, jpg-q80, jpg-q85, jpg-q90, jpg-q95, jpg-q100, webp, webp-q75, webp-q80, webp-q85, webp-q90, webp-q95, webp-q100, webp-l),
# Note: any webp format requires the presence of the 'webp command line tools' (cwebp, dwebp) (https://developers.google.com/speed/webp/download)
#
# Has no effect on maps with explicit format settings
image-format: jpg-q90

# If cwebp or dwebp are not on the PATH, use these settings to provide their full path.  Do not use these settings if the tools are on the PATH
# For Windows, include .exe
#
#cwebpPath: /usr/bin/cwebp
#dwebpPath: /usr/bin/dwebp

#  use-generated-textures: if true, use generated textures (same as client); false is static water/lava textures
#  correct-water-lighting: if true, use corrected water lighting (same as client); false is legacy water (darker)
#  transparent-leaves: if true, leaves are transparent (lighting-wise): false is needed for some Spout versions that break lighting on leaf blocks
use-generated-textures: true
correct-water-lighting: true
transparent-leaves: true

# ctm-support: if true, Connected Texture Mod (CTM) in texture packs is enabled (default)
ctm-support: true
# custom-colors-support: if true, Custom Colors in texture packs is enabled (default)
custom-colors-support: true

# Control loading of player faces (if set to false, skins are never fetched)
#fetchskins: false

# Control updating of player faces, once loaded (if faces are being managed by other apps or manually)
#refreshskins: false

# Customize URL used for fetching player skins (%player% is macro for name, %uuid% for UUID)
skin-url: "http://skins.minecraft.net/MinecraftSkins/%player%.png"

# Control behavior for new (1.0+) compass orientation (sunrise moved 90 degrees: east is now what used to be south)
#   default is 'newrose' (preserve pre-1.0 maps, rotate rose)
#   'newnorth' is used to rotate maps and rose (requires fullrender of any HDMap map - same as 'newrose' for FlatMap or KzedMap)
compass-mode: newnorth

# Triggers for automatic updates : blockupdate-with-id is debug for breaking down updates by ID:meta
# To disable, set just 'none' and comment/delete the rest
render-triggers:
  - blockupdate
  #- blockupdate-with-id
  - chunkgenerate
  #- none

# Title for the web page - if not specified, defaults to the server's name (unless it is the default of 'Unknown Server')
#webpage-title: "My Awesome Server Map"

# The path where the tile-files are placed.
tilespath: web/tiles

# The path where the web-files are located.
webpath: web

# If set to false, disable extraction of webpath content (good if using custom web UI or 3rd party web UI)
# Note: web interface is unsupported in this configuration - you're on your own
update-webpath-files: true

# The path were the /dynmapexp command exports OBJ ZIP files
exportpath: export

# The network-interface the webserver will bind to (0.0.0.0 for all interfaces, 127.0.0.1 for only local access).
# If not set, uses same setting as server in server.properties (or 0.0.0.0 if not specified)
#webserver-bindaddress: 0.0.0.0

# The TCP-port the webserver will listen on.
webserver-port: 8123

# Maximum concurrent session on internal web server - limits resources used in Bukkit server
max-sessions: 30

# Disables Webserver portion of Dynmap (Advanced users only)
disable-webserver: false

# Enable/disable having the web server allow symbolic links (true=compatible with existing code, false=more secure (default))
allow-symlinks: true

# Enable login support
login-enabled: false
# Require login to access website (requires login-enabled: true)
login-required: false

# Period between tile renders for fullrender, in seconds (non-zero to pace fullrenders, lessen CPU load)
timesliceinterval: 0.0

# Maximum chunk loads per server tick (1/20th of a second) - reducing this below 90 will impact render performance, but also will reduce server thread load
maxchunkspertick: 200

# Progress report interval for fullrender/radiusrender, in tiles.  Must be 100 or greater
progressloginterval: 100

# Parallel fullrender: if defined, number of concurrent threads used for fullrender or radiusrender
#   Note: setting this will result in much more intensive CPU use, some additional memory use.  Caution should be used when
#  setting this to equal or exceed the number of physical cores on the system.
#parallelrendercnt: 4

# Interval the browser should poll for updates.
updaterate: 2000

# If nonzero, server will pause fullrender/radiusrender processing when 'fullrenderplayerlimit' or more users are logged in
fullrenderplayerlimit: 1
# If nonzero, server will pause update render processing when 'updateplayerlimit' or more users are logged in
updateplayerlimit: 1
# Target limit on server thread use - msec per tick
per-tick-time-limit: 50
# If TPS of server is below this setting, update renders processing is paused
update-min-tps: 18.0
# If TPS of server is below this setting, full/radius renders processing is paused
fullrender-min-tps: 18.0
# If TPS of server is below this setting, zoom out processing is paused
zoomout-min-tps: 18.0

showplayerfacesinmenu: true

# Control whether players that are hidden or not on current map are grayed out (true=yes)
grayplayerswhenhidden: true

# Set sidebaropened: 'true' to pin menu sidebar opened permanently, 'pinned' to default the sidebar to pinned, but allow it to unpin
#sidebaropened: true

# Customized HTTP response headers - add 'id: value' pairs to all HTTP response headers (internal web server only)
#http-response-headers:
#    Access-Control-Allow-Origin: "my-domain.com"
#    X-Custom-Header-Of-Mine: "MyHeaderValue"

# Trusted proxies for web server - which proxy addresses are trusted to supply valid X-Forwarded-For fields
#   This now supports both IP address, and subnet ranges (e.g. 192.168.1.0/24 or 202.24.0.0/14 )
trusted-proxies:
  - "127.0.0.1"
  - "0:0:0:0:0:0:0:1"

joinmessage: "%playername% joined"
quitmessage: "%playername% quit"
spammessage: "You may only chat once every %interval% seconds."
# format for messages from web: %playername% substitutes sender ID (typically IP), %message% includes text
webmsgformat: "&color;2[WEB] %playername%: &color;f%message%"

# Control whether layer control is presented on the UI (default is true)
showlayercontrol: true

# Enable checking for banned IPs via banned-ips.txt (internal web server only)
check-banned-ips: true

# Default selection when map page is loaded
defaultzoom: 0
defaultworld: world
defaultmap: flat
# (optional) Zoom level and map to switch to when following a player, if possible
#followzoom: 3
#followmap: surface

# If true, make persistent record of IP addresses used by player logins, to support web IP to player matching
persist-ids-by-ip: true

# If true, map text to cyrillic
cyrillic-support: false

# Messages to customize
msg:
    maptypes: "Map Types"
    players: "Players"
    chatrequireslogin: "Chat Requires Login"
    chatnotallowed: "You are not permitted to send chat messages"
    hiddennamejoin: "Player joined"
    hiddennamequit: "Player quit"

# URL for client configuration (only need to be tailored for proxies or other non-standard configurations)
url:
    # configuration URL
    #configuration: "up/configuration"
    # update URL
    #update: "up/world/{world}/{timestamp}"
    # sendmessage URL
    #sendmessage: "up/sendmessage"
    # login URL
    #login: "up/login"
    # register URL
    #register: "up/register"
    # tiles base URL
    #tiles: "tiles/"
    # markers base URL
    #markers: "tiles/"
    # Snapshot cache size, in chunks
snapshotcachesize: 500
# Snapshot cache uses soft references (true), else weak references (false)
soft-ref-cache: true

# Player enter/exit title messages for map markers
#
# Processing period - how often to check player positions vs markers - default is 1000ms (1 second)
#enterexitperiod: 1000
# Title message fade in time, in ticks (0.05 second intervals) - default is 10 (1/2 second)
#titleFadeIn: 10
# Title message stay time, in ticks (0.05 second intervals) - default is 70 (3.5 seconds)
#titleStay: 70
# Title message fade out time, in ticks (0.05 seocnd intervals) - default is 20 (1 second)
#titleFadeOut: 20
# Enter/exit messages use on screen titles (true - default), if false chat messages are sent instead
#enterexitUseTitle: true
# Set true if new enter messages should supercede pending exit messages (vs being queued in order), default false
#enterReplacesExits: true

# Published public URL for Dynmap server (allows users to use 'dynmap url' command to get public URL usable to access server
# If not set, 'dynmap url' will not return anything.  URL should be fully qualified (e.g. https://mc.westeroscraft.com/)
#publicURL: http://my.greatserver.com/dynmap

# Set to true to enable verbose startup messages - can help with debugging map configuration problems
# Set to false for a much quieter startup log
verbose: false

# Enables debugging.
#debuggers:
#  - class: org.dynmap.debug.LogDebugger
# Debug: dump blocks missing render data
dump-missing-blocks: false

# Log4J defense: string substituted for attempts to use macros in web chat
hackAttemptBlurb: "(IaM5uchA1337Haxr-Ban Me!)"