DEBUG | ??:??:?? 3 [GPS] Trying $PCAS06,1*1A (ATGM332D) ...
DEBUG | ??:??:?? 3 [GPS] Trying $PAIR021*39 (AG3335) ...
DEBUG | ??:??:?? 4 [GPS] Trying $PAIR021*39 (AG3352) ...
DEBUG | ??:??:?? 4 [GPS] Trying $PQTMVERNO*58 (LC86) ...
DEBUG | ??:??:?? 5 [GPS] Trying $PCAS06,0*1B (L76K) ...
INFO  | ??:??:?? 5 [GPS] L76K detected, using GNSS_MODEL_MTK Module
INFO  | ??:??:?? 6 [RangeTestModule] Range Test Module - Disabled
INFO  | ??:??:?? 6 [PowerFSM] Loss of power in Powered
DEBUG | ??:??:?? 6 [Screen] haveGlyphs=1
INFO  | ??:??:?? 6 [PowerFSM] Loss of power in Powered
INFO  | ??:??:?? 6 [PowerFSM] Initialise the NimBLE bluetooth module
DEBUG | ??:??:??�ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xf (BROWNOUT_RST),boot:0x9 (SPI_FAST_FLASH_BOOT)
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce3808,len:0x4bc
load:0x403c9700,len:0xbd8
load:0x403cc700,len:0x2a0c
entry 0x403c98d0
E (343) esp_core_dump_flash: No core dump partition found!
E (343) esp_core_dump_flash: No core dump partition found!
��@INFO  | ??:??:?? 0

//\ E S H T /\ S T / C

INFO  | ??:??:?? 0 Booted, wake cause 0 (boot count 1), reset_reason=brownout
DEBUG | ??:??:?? 0 Filesystem files (495616/1048576 Bytes):
DEBUG | ??:??:?? 0  /prefs/channels.proto (82 Bytes)
DEBUG | ??:??:?? 0  /prefs/config.proto (196 Bytes)
DEBUG | ??:??:?? 0  /prefs/db.proto (407 Bytes)
DEBUG | ??:??:?? 0  /prefs/module.proto (101 Bytes)
DEBUG | ??:??:?? 0  /static/.gitkeep (0 Bytes)
DEBUG | ??:??:?? 0  /static/Logo_Black.svg.gz (602 Bytes)
DEBUG | ??:??:?? 0  /static/Logo_White.svg.gz (610 Bytes)
DEBUG | ??:??:?? 0  /static/apple-touch-icon.png.gz (3164 Bytes)
DEBUG | ??:??:?? 0  /static/favicon.ico.gz (2270 Bytes)
DEBUG | ??:??:?? 0  /static/icon.svg.gz (852 Bytes)
DEBUG | ??:??:?? 0  /static/index-B272zAn3.css.gz (16427 Bytes)
DEBUG | ??:??:?? 0  /static/index-CGqDWSD_.js.gz (348 Bytes)
DEBUG | ??:??:?? 0  /static/index-CgmZQ_N-.js.gz (204401 Bytes)
DEBUG | ??:??:?? 0  /static/index.html.gz (549 Bytes)
DEBUG | ??:??:?? 0  /static/maplibre-gl-69L4OEQ1.js.gz (210430 Bytes)
DEBUG | ??:??:?? 0  /static/robots.txt.gz (42 Bytes)
DEBUG | ??:??:?? 0  /static/site.webmanifest.gz (197 Bytes)
[   739][I][esp32-hal-i2c.c:75] i2cInit(): Initialising I2C Master: sda=41 scl=42 freq=100000
[   753][I][esp32-hal-i2c.c:75] i2cInit(): Initialising I2C Master: sda=17 scl=18 freq=100000
DEBUG | ??:??:?? 0 Power::lipoInit lipo sensor is not ready yet
DEBUG | ??:??:?? 0 Using analog input 1 for battery level
INFO  | ??:??:?? 0 ADCmod: ADC Characterization based on Two Point values and fitting curve coefficients stored in eFuse
INFO  | ??:??:?? 0 Scanning for i2c devices...
[   787][W][Wire.cpp:301] begin(): Bus already started in Master Mode.
DEBUG | ??:??:?? 0 Scanning for I2C devices on port 2
[   818][W][Wire.cpp:301] begin(): Bus already started in Master Mode.
DEBUG | ??:??:?? 0 Scanning for I2C devices on port 1
DEBUG | ??:??:?? 0 I2C device found at address 0x3c
INFO  | ??:??:?? 0 ssd1306 display found
INFO  | ??:??:?? 0 ssd1306 display found
DEBUG | ??:??:?? 0 0x3 subtype probed in 2 tries
INFO  | ??:??:?? 0 1 I2C devices found
DEBUG | ??:??:?? 0 acc_info = 0
INFO  | ??:??:?? 0 S:B:43,2.5.4.8d288d5
INFO  | ??:??:?? 0 Build timestamp: 1727744800
DEBUG | ??:??:?? 0 Total heap: 291328
DEBUG | ??:??:?? 0 Free heap: 253908
DEBUG | ??:??:?? 0 Total PSRAM: 0
DEBUG | ??:??:?? 0 Free PSRAM: 0
DEBUG | ??:??:?? 0 NVS: UsedEntries 220, FreeEntries 410, AllEntries 630, NameSpaces 8
DEBUG | ??:??:?? 0 Setup Preferences in Flash Storage
DEBUG | ??:??:?? 0 Number of Device Reboots: 955
INFO  | ??:??:?? 0 OTA firmware version 0.2.1.ceca52c
INFO  | ??:??:?? 0 Initializing NodeDB
INFO  | ??:??:?? 0 Loading /prefs/db.proto
INFO  | ??:??:?? 0 Loaded /prefs/db.proto successfully
INFO  | ??:??:?? 0 Loaded saved devicestate version 22, with nodecount: 1
INFO  | ??:??:?? 0 Loading /prefs/config.proto
INFO  | ??:??:?? 0 Loaded /prefs/config.proto successfully
INFO  | ??:??:?? 0 Loaded saved config version 22
INFO  | ??:??:?? 1 Loading /prefs/module.proto
INFO  | ??:??:?? 1 Loaded /prefs/module.proto successfully
INFO  | ??:??:?? 1 Loaded saved moduleConfig version 23
INFO  | ??:??:?? 1 Loading /prefs/channels.proto
INFO  | ??:??:?? 1 Loaded /prefs/channels.proto successfully
INFO  | ??:??:?? 1 Loaded saved channelFile version 22
[  1087][E][vfs_api.cpp:105] open(): /littlefs/oem/oem.proto does not exist, no permits for creation
ERROR | ??:??:?? 1 Could not open / read /oem/oem.proto
DEBUG | ??:??:?? 1 cleanupMeshDB purged 0 entries
DEBUG | ??:??:?? 1 Using nodenum 0x4358e3e0
DEBUG | ??:??:?? 1 Number of Device Reboots: 955
DEBUG | ??:??:?? 1 Expanding short PSK #1
DEBUG | ??:??:?? 1 Unset PSK for secondary channel Stratford. using primary key
DEBUG | ??:??:?? 1 Expanding short PSK #1
INFO  | ??:??:?? 1 Wanted region 1, using US
INFO  | ??:??:?? 1 Saving /prefs/db.proto
DEBUG | ??:??:?? 1 Using GPIO00 for button
DEBUG | ??:??:?? 1 SPI.begin(SCK=9, MISO=11, MOSI=10, NSS=8)
DEBUG | ??:??:?? 1 Set Timezone to GMT0
DEBUG | ??:??:?? 1 Read RTC time as 1
INFO  | ??:??:?? 1 GPS power state moving from OFF to ACTIVE
DEBUG | ??:??:?? 1 Using GPIO48 for GPS RX
DEBUG | ??:??:?? 1 Using GPIO47 for GPS TX
DEBUG | ??:??:?? 1 NeighborInfoModule is disabled
DEBUG | ??:??:?? 1 Rescanning for I2C keyboard
DEBUG | ??:??:?? 1 Scanning for I2C devices on port 2
DEBUG | ??:??:?? 1 Scanning address 0x1f
DEBUG | ??:??:?? 1 Scanning address 0x55
DEBUG | ??:??:?? 1 Scanning address 0x5f
DEBUG | ??:??:?? 1 Scanning for I2C devices on port 1
DEBUG | ??:??:?? 1 Scanning address 0x1f
DEBUG | ??:??:?? 1 Scanning address 0x55
DEBUG | ??:??:?? 1 Scanning address 0x5f
INFO  | ??:??:?? 1 External Notification Module Disabled
INFO  | ??:??:?? 1 Turning on screen
DEBUG | ??:??:?? 1 haveGlyphs=1
DEBUG | ??:??:?? 1 Module wants a UI Frame
DEBUG | ??:??:?? 1 Module wants a UI Frame
DEBUG | ??:??:?? 1 SX126xInterface(cs=8, irq=14, rst=12, busy=13)
DEBUG | ??:??:?? 1 SX126X_DIO3_TCXO_VOLTAGE defined, using DIO3 as TCXO reference voltage at 1.800000 V
INFO  | ??:??:?? 1 Starting meshradio init...
DEBUG | ??:??:?? 1 (bw=250, sf=11, cr=4/5) packet symLen=8 ms, payloadSize=0, time 231 ms
DEBUG | ??:??:?? 1 (bw=250, sf=11, cr=4/5) packet symLen=8 ms, payloadSize=253, time 2115 ms
INFO  | ??:??:?? 1 Radio freq=906.875, config.lora.frequency_offset=0.000
INFO  | ??:??:?? 1 Set radio: region=US, name=LongFast, config=0, ch=19, power=30
INFO  | ??:??:?? 1 Radio myRegion->freqStart -> myRegion->freqEnd: 902.000000 -> 928.000000 (26.000000 MHz)
INFO  | ??:??:?? 1 Radio myRegion->numChannels: 104 x 250.000kHz
INFO  | ??:??:?? 1 Radio channel_num: 20
INFO  | ??:??:?? 1 Radio frequency: 906.875000
INFO  | ??:??:?? 1 Slot time: 77 msec
INFO  | ??:??:?? 1 Set radio: final power level=22
INFO  | ??:??:?? 1 SX126x init result 0
INFO  | ??:??:?? 1 Frequency set to 906.875000
INFO  | ??:??:?? 1 Bandwidth set to 250.000000
INFO  | ??:??:?? 1 Power output set to 22
DEBUG | ??:??:?? 1 Current limit set to 140.000000
DEBUG | ??:??:?? 1 Current limit set result 0
DEBUG | ??:??:?? 1 Set DIO2 as RF switch, result: 0
DEBUG | ??:??:?? 1 SX126X_RXEN not defined, defaulting to RADIOLIB_NC
DEBUG | ??:??:?? 1 SX126X_TXEN not defined, defaulting to RADIOLIB_NC
DEBUG | ??:??:?? 1 Using MCU pin -1 as RXEN and pin -1 as TXEN to control RF switching
INFO  | ??:??:?? 1 Set RX gain to boosted mode; result: 0
INFO  | ??:??:?? 1 SX1262 Radio init succeeded, using SX1262 radio
DEBUG | ??:??:?? 1 Initializing MQTT
INFO  | ??:??:?? 1 Not using WIFI
DEBUG | ??:??:?? 1 (bw=250, sf=11, cr=4/5) packet symLen=8 ms, payloadSize=237, time 2000 ms
DEBUG | ??:??:?? 1 LoRA bitrate = 118.500000 bytes / sec
INFO  | ??:??:?? 1 PowerFSM init, USB power=1
DEBUG | ??:??:?? 1 Enter state: BOOT
[  1779][D][esp32-hal-cpu.c:244] setCpuFrequencyMhz(): PLL: 480 / 6 = 80 Mhz, APB: 80000000 Hz
DEBUG | ??:??:?? 1 [Power] Battery: usbPower=0, isCharging=0, batMv=3100, batPct=0
DEBUG | ??:??:?? 1 [Screen] Screen: Started...
DEBUG | ??:??:?? 1 [Screen] haveGlyphs=1
DEBUG | ??:??:?? 1 [GPS] Probing for GPS at 9600
DEBUG | ??:??:?? 1 [GPS] Trying $PDTINFO (UC6580) ...
DEBUG | ??:??:?? 2 [GPS] Trying $PDTINFO (UM600) ...
DEBUG | ??:??:?? 2 [GPS] Trying $PCAS06,1*1A (ATGM336H) ...
DEBUG | ??:??:?? 3 [GPS] Trying $PCAS06,1*1A (ATGM332D) ...
DEBUG | ??:??:?? 3 [GPS] Trying $PAIR021*39 (AG3335) ...
DEBUG | ??:??:?? 4 [GPS] Trying $PAIR021*39 (AG3352) ...
DEBUG | ??:??:?? 4 [GPS] Trying $PQTMVERNO*58 (LC86) ...
DEBUG | ??:??:?? 5 [GPS] Trying $PCAS06,0*1B (L76K) ...
INFO  | ??:??:?? 5 [GPS] L76K detected, using GNSS_MODEL_MTK Module
DEBUG | ??:??:?? 6 [GPS] publishing pos@0:2, hasVal=0, Sats=0, GPSlock=0
DEBUG | ??:??:?? 6 [GPS] No GPS lock
DEBUG | ??:??:?? 6 [GPS] onGPSChanged() pos@0 time=0 lat=0 lon=0 alt=0
INFO  | ??:??:?? 6 [GPS] updatePosition LOCAL pos@0 time=0 lat=0 lon=0 alt=0
DEBUG | ??:??:?? 6 [GPS] Setting local position: lat=0 lon=0 time=0 timestamp=0
DEBUG | ??:??:?? 6 [GPS] Node status update: 1 online, 1 total
INFO  | ??:??:?? 6 [RangeTestModule] Range Test Module - Disabled
INFO  | ??:??:?? 6 [PowerFSM] Loss of power in Powered
DEBUG | ??:??:?? 6 [Screen] haveGlyphs=1
INFO  | ??:??:?? 6 [PowerFSM] Loss of power in Powered
INFO  | ??:??:?? 6 [PowerFSM] Initialise the NimBLE bluetooth module
DEBUG | �ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xf (BROWNOUT_RST),boot:0x9 (SPI_FAST_FLASH_BOOT)
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce3808,len:0x4bc
load:0x403c9700,len:0xbd8
load:0x403cc700,len:0x2a0c
entry 0x403c98d0
E (343) esp_core_dump_flash: No core dump partition found!
E (343) esp_core_dump_flash: No core dump partition found!
��@INFO  | ??:??:?? 0

//\ E S H T /\ S T / C

INFO  | ??:??:?? 0 Booted, wake cause 0 (boot count 1), reset_reason=brownout
DEBUG | ??:??:?? 0 Filesystem files (495616/1048576 Bytes):