Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- interface SM1/0
- ip address 192.168.201.1 255.255.255.0
- service-module ip address 192.168.201.2 255.255.255.0
- service-module ip default-gateway 192.168.201.1
- interface SM1/1
- description Internal switch interface connected to Service Module
- switchport mode trunk
- no ip address
- Router#service-module sm1/0 install url http://172.21.49.155:8000/sre-v-k9-r.SPA.smv.2.0.1.pkg
- Proceed with installation? [no]: yes
- Loading http://172.21.49.155:8000/sre-v-k9-r.SPA.smv.2.0.1.pkg.install.sre !
- Service module installation
- ios_version 15.2(4)M2,
- ios_image c2900-universalk9-mz
- pkg_name sre-v-k9-r.SPA.smv.2.0.1.pkg
- key_file sre-v-k9-r.SPA.smv.2.0.1.key
- helper_file sre-v-installer.SPA.smv.2.0.1
- pid SM-SRE-900-K9
- Check target platform capabilities
- cpu 1865
- Please select disk configuration (-1 = nonraid, 0 = raid0, 1 = raid1 ) [-1]: 1
- Resource check completed successfully. Proceeding to Install ...
- Router#
- Initializing memory #1. Please wait...
- Initializing memory #2. Please wait...
- This may take a minute....
- Serial ATA Port 0 : Hitachi HTE545050B9A300
- Serial ATA Port 1 : Hitachi HTE545050B9A300
- DDR Memory 8192 MB detected
- Intel(R) Core(TM)2 Duo CPU L9400 @ 1.86GHz
- BIOS SM 3.52.8, BIOS Build date: 02/08/2011
- Intel(R) Core(TM)2 Duo CPU L9400 @ 1.86GHz
- BIOS SM 3.52.8, BIOS Build date: 02/08/2011
- System now booting...
- Please wait...
- Please press P to select Primary Boot Loader ...
- or S to select Secondary Boot Loader ...
- or wait to boot from default configuration ...
- .......................................................................................................
- Now booting from primary boot loader (Default)....
- Authenticating boot loader....
- Primary Boot Loader Authenticated - booting....
- boot params not set.
- Updating flash with bootloader configuration.
- Please wait ................... done.
- Please enter '***' to change boot configuration:
- Detect and Initialize network device
- Backup current platform configurations....
- Updating flash with bootloader configuration.
- Please wait ................... done.
- SRE step 1 - SM registration...
- Finding (hd1,3)/296e03bc-3236-4a68-a178-688e56400a1e, failed
- Local install not supported
- SRE step 2 - SM requests key file info...
- SRE step 3 - SM stores registration info...
- Updating flash with bootloader configuration.
- Please wait ................... done.
- SRE step 4 - SM downloads key-file...
- Writing keyfile to flash Size 916
- writing complete.
- Updating flash with bootloader configuration.
- Please wait ................... done.
- Erasing Post config Flash
- SRE step 5 - SM requests installer info...
- SRE step 6 - SM stores installer info...
- Updating flash with bootloader configuration.
- Please wait ................... done.
- SRE step 7 - SM now downloads installer
- | done.
- SRE step 8 - SM requests tcl header file info...
- SRE step 9 - SM now downloads the tcl header file
- TCL header file downloaded completely size: 698
- SRE step 10 - SM requests tcl file info...
- SRE step 11 - SM now downloads the tcl file
- TCL file downloaded completely size: 6520
- SRE step 12 - SM now boots Installer
- Verifying ... done.
- Starting Kernel.
- Platform: sm
- INIT: version 2.86 booting
- mounting proc fs ...
- mounting sys fs ...
- mounting /dev/shm tmpfs ...
- kernel.sem = 1900 4000 32 100
- vm.overcommit_memory = 1
- Welcome to Cisco Service Engine
- Setting the system time from hardware clock
- ********** rc.aesop ****************
- Populating resource values from /etc/sm_rsrc_file
- Populating resource values from /etc/default_rsrc_file
- Populating resource values from /usr/etc/products/galactica/default_rsrc_file
- Populating resource values from /usr/etc/products/galactica/sm_rsrc_file
- ==> Management interface is eth0
- ==> Management interface is eth0
- IOS IP Address Registration complete.
- Kernel IP routing table
- Destination Gateway Genmask Flags MSS Window irtt Iface
- 192.168.201.0 * 255.255.255.0 U 0 0 0 eth0
- default 192.168.201.1 0.0.0.0 UG 0 0 0 eth0
- SM-SRE-900-K9 is in IDE mode
- INIT: Entering runlevel: 2
- ********** rc.post_install ****************
- Changing owners and file permissions.
- Change owners and permissions complete.
- INIT: Switching to runlevel: 4
- INIT: Sending processes the TERM signal
- STARTED: dwnldr_startup.sh
- sre_type= 1
- Welcome to Cisco Systems Service Engine Helper Software
- userinput= disk-cfg-mode=raid1
- Downloading http sre-v-k9-r.SPA.smv.2.0.1.pkg
- SM1/0 is reset due to
- Can not download sre-v-k9-r.SPA.smv.2.0.1.pkg
- error code 0 : error type 'couldn't connect to host'.
- Error: Download error
- Can not download sre-v-k9-r.SPA.smv.2.0.1.pkg
- error code 0 : error type 'couldn't connect to host'
- Unable to install. Please try again.
- Router#service-module sm1/0 install url http://172.21.49.155:8000/AS_SMWLC_7_4_110_0.aes
- Proceed with installation? [no]: yes
- Loading http://172.21.49.155:8000/AS_SMWLC_7_4_110_0.aes.install.sre Welcome to WLC installation checking resource requirements now
- Resource check complete proceeding with installation
- Router#
- [Resuming connection 1 to 192.168.201.1 ... ]
- Detect and Initialize network device
- Initializing memory #1. Please wait...
- Initializing memory #2. Please wait...
- This may take a minute....
- Serial ATA Port 0 : Hitachi HTE545050B9A300
- Serial ATA Port 1 : Hitachi HTE545050B9A300
- DDR Memory 8192 MB detected
- Intel(R) Core(TM)2 Duo CPU L9400 @ 1.86GHz
- BIOS SM 3.52.8, BIOS Build date: 02/08/2011
- Intel(R) Core(TM)2 Duo CPU L9400 @ 1.86GHz
- BIOS SM 3.52.8, BIOS Build date: 02/08/2011
- System now booting...
- Please wait...
- Please press P to select Primary Boot Loader ...
- or S to select Secondary Boot Loader ...
- or wait to boot from default configuration ...
- .......................................................................................................
- Now booting from primary boot loader....
- Authenticating boot loader....
- Primary Boot Loader Authenticated - booting....
- Please enter '***' to change boot configuration:
- Detect and Initialize network device
- Backup current platform configurations....
- SRE step 1 - SM registration...
- Finding (hd1,3)/296e03bc-3236-4a68-a178-688e56400a1e, failed
- Local install not supported
- SRE step 2 - SM requests key file info...
- SRE step 3 - SM stores registration info...
- SRE configuration keeps the same. No flash update needed!
- SRE step 4 - SM downloads key-file...
- Writing keyfile to flash Size 914
- writing complete.
- Updating flash with bootloader configuration.
- Please wait .................... done.
- Erasing Post config Flash
- SRE step 5 - SM requests installer info...
- SRE step 6 - SM stores installer info...
- Updating flash with bootloader configuration.
- Please wait .................... done.
- SRE step 7 - SM now downloads installer
- done.
- SRE step 8 - SM requests tcl header file info...
- SRE step 9 - SM now downloads the tcl header file
- TCL header file downloaded completely size: 690
- SRE step 10 - SM requests tcl file info...
- SRE step 11 - SM now downloads the tcl file
- TCL file downloaded completely size: 2819
- SRE step 12 - SM now boots Installer
- Verifying ... done.
- Starting Kernel.
- Platform: sm
- INIT: version 2.86 booting
- mounting proc fs ...
- mounting sys fs ...
- mounting /dev/shm tmpfs ...
- kernel.sem = 1900 4000 32 100
- vm.overcommit_memory = 1
- Welcome to Cisco Service Engine
- Setting the system time from hardware clock
- ********** rc.aesop ****************
- Populating resource values from /etc/sm_rsrc_file
- Populating resource values from /etc/default_rsrc_file
- ==> Management interface is eth0
- ==> Management interface is eth0
- IOS IP Address Registration complete.
- Kernel IP routing table
- Destination Gateway Genmask Flags MSS Window irtt Iface
- 192.168.201.0 * 255.255.255.0 U 0 0 0 eth0
- default 192.168.201.1 0.0.0.0 UG 0 0 0 eth0
- Size of buff is: 65536
- 65536 bytes written
- Valid License file not found: Using default values
- INIT: Entering runlevel: 2
- ********** rc.post_install ****************
- Changing owners and file permissions.
- Change owners and permissions complete.
- INIT: Switching to runlevel: 4
- INIT: Sending processes the TERM signal
- STARTED: dwnldr_startup.sh
- You are about to repartition your compact flash, which will destroy all
- existing data on it.
- Do you want to Continue? [yn]:
- Validating Flash Disk Geometry...
- Disk has a Valid partition table!
- TotalCylinders = 1960
- BytesPerCylinder = 1048576
- SafetyZoneBytes = 123312537
- SafetyZoneCylinders = 118
- TotalCylinders (after safety zone reduction) = 1842
- WARNING: About to repartition disk /dev/sdc as shown:
- /dev/sdc1 33 cylinders (33 Mb)
- /dev/sdc2* 9 cylinders (9 Mb)
- /dev/sdc3 1795 cylinders (1795 Mb)
- /dev/sdc4 5 cylinders (5 Mb)
- Partitioning the flash disk...
- Disk /dev/sdc: 1960 cylinders, 64 heads, 32 sectors/track
- Old situation:
- Units = cylinders of 1048576 bytes, blocks of 1024 bytes, counting from 0
- Device Boot Start End #cyls #blocks Id System
- /dev/sdc1 4 899 896 917504 5 Extended
- /dev/sdc2 0 - 0 0 0 Empty
- /dev/sdc3 0 - 0 0 0 Empty
- /dev/sdc4 * 0+ 3 4- 4080 ef EFI (FAT-12/16/32)
- /dev/sdc5 4+ 253 250- 255984 6 FAT16
- /dev/sdc6 254+ 503 250- 255984 6 FAT16
- /dev/sdc7 504+ 613 110- 112624 fc Unknown
- /dev/sdc8 614+ 899 286- 292848 6 FAT16
- New situation:
- Units = cylinders of 1048576 bytes, blocks of 1024 bytes, counting from 0
- Device Boot Start End #cyls #blocks Id System
- /dev/sdc1 0+ 32 33- 33791+ c W95 FAT32 (LBA)
- /dev/sdc2 * 33 41 9 9216 83 Linux
- /dev/sdc3 42 1836 1795 1838080 83 Linux
- /dev/sdc4 1837 1841 5 5120 83 Linux
- Successfully wrote the new partition table
- Re-reading the partition table ...
- Creating the filesystems...
- % Total % Received % Xferd Average Speed Time Time Time Current
- Dload Upload Total Spent Left Speed
- 100 299k 100 299k 0 0 1524k 0 --:--:-- --:--:-- --:--:-- 5542k
- Read 306504 bytes from sm_bl
- % Total % Received % Xferd Average Speed Time Time Time Current
- Dload Upload Total Spent Left Speed
- 2 112M 2 3088k 0 0 3505k 0 0:00:32 --:--:-- 0:00:32 3869k
- 100 112M 100 112M 0 0 8510k 0 0:00:13 0:00:13 --:--:-- 9247k.
- Executing Product Check TLV.
- Executing Version Built TLV.
- Warning: Unknown TLV ignored.
- Warning: Unknown TLV code 8 - ignored.
- Executing init script.
- Executing backup script.
- Executing install_bootloader script.
- Writing new RTOS to flash disk.
- Executing install_rtos script.
- Writing new Code to flash disk.
- Executing install_code script.
- Writing new Emergency Bootloader to flash disk.
- Writing new Emergency Bootloader RTOS to flash disk.
- Writing new Emergency Version to flash disk.
- Writing new AP Image Bundle to flash disk.
- Executing fini script.
- Install successful on SM1/0. Please wait for module to reset before next operation.
- STARTED: dwnldr_startup.sh
- sre_type= 1
- Welcome to Cisco Systems Service Engine Helper Software
- userinput= disk-cfg-mode=raid1
- Downloading http sre-v-k9-r.SPA.smv.2.0.1.pkg
- Bytes downloaded : 14001
- Validating package signature ... done
- - Parsing package manifest files... complete.
- No installed manifests found.
- - Checking Package dependencies... complete.
- - Checking Manifest dependencies for subsystems in the install candidate list...
- EXITED: dwnldr_startup.sh exit status 137
- Process shutdown complete.
- starting_phase:
- install_files.sh /mnt/dwnld/.work_order
- Remove: /mivmdk//dwnld/scripts
- . rbcp_install_status_msg_for
- Install successful on SM1/0. Please wait for module to reset before next operation.
Add Comment
Please, Sign In to add comment