Guest User

Untitled

a guest
Mar 10th, 2016
57
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [user@localhost ~]$ sudo smartctl -d ata -a -i /dev/sda
  2. smartctl 6.4 2015-06-04 r4109 [x86_64-linux-4.4.3-300.fc23.x86_64] (local build)
  3. Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org
  4.  
  5. === START OF INFORMATION SECTION ===
  6. Device Model: MAXTOR STM3160815AS
  7. Serial Number: 6RA2SDYT
  8. Firmware Version: 3.AAD
  9. User Capacity: 160.040.803.840 bytes [160 GB]
  10. Sector Size: 512 bytes logical/physical
  11. Device is: Not in smartctl database [for details use: -P showall]
  12. ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
  13. Local Time is: Thu Mar 10 19:43:07 2016 EET
  14. SMART support is: Available - device has SMART capability.
  15. SMART support is: Enabled
  16.  
  17. === START OF READ SMART DATA SECTION ===
  18. SMART overall-health self-assessment test result: PASSED
  19.  
  20. General SMART Values:
  21. Offline data collection status: (0x82) Offline data collection activity
  22. was completed without error.
  23. Auto Offline Data Collection: Enabled.
  24. Self-test execution status: ( 0) The previous self-test routine completed
  25. without error or no self-test has ever
  26. been run.
  27. Total time to complete Offline
  28. data collection: ( 430) seconds.
  29. Offline data collection
  30. capabilities: (0x5b) SMART execute Offline immediate.
  31. Auto Offline data collection on/off support.
  32. Suspend Offline collection upon new
  33. command.
  34. Offline surface scan supported.
  35. Self-test supported.
  36. No Conveyance Self-test supported.
  37. Selective Self-test supported.
  38. SMART capabilities: (0x0003) Saves SMART data before entering
  39. power-saving mode.
  40. Supports SMART auto save timer.
  41. Error logging capability: (0x01) Error logging supported.
  42. General Purpose Logging supported.
  43. Short self-test routine
  44. recommended polling time: ( 1) minutes.
  45. Extended self-test routine
  46. recommended polling time: ( 54) minutes.
  47.  
  48. SMART Attributes Data Structure revision number: 10
  49. Vendor Specific SMART Attributes with Thresholds:
  50. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  51. 1 Raw_Read_Error_Rate 0x000f 106 099 006 Pre-fail Always - 11420540
  52. 3 Spin_Up_Time 0x0003 097 097 000 Pre-fail Always - 0
  53. 4 Start_Stop_Count 0x0032 095 095 020 Old_age Always - 5847
  54. 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
  55. 7 Seek_Error_Rate 0x000f 089 060 030 Pre-fail Always - 835579276
  56. 9 Power_On_Hours 0x0032 085 085 000 Old_age Always - 13676
  57. 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
  58. 12 Power_Cycle_Count 0x0032 095 095 020 Old_age Always - 5812
  59. 187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 65535
  60. 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
  61. 190 Airflow_Temperature_Cel 0x0022 067 047 045 Old_age Always - 33 (Min/Max 23/34)
  62. 194 Temperature_Celsius 0x0022 033 053 000 Old_age Always - 33 (0 9 0 0 0)
  63. 195 Hardware_ECC_Recovered 0x001a 080 061 000 Old_age Always - 116043665
  64. 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
  65. 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
  66. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  67. 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
  68. 202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0
  69.  
  70. SMART Error Log Version: 1
  71. ATA Error Count: 65535 (device log contains only the most recent five errors)
  72. CR = Command Register [HEX]
  73. FR = Features Register [HEX]
  74. SC = Sector Count Register [HEX]
  75. SN = Sector Number Register [HEX]
  76. CL = Cylinder Low Register [HEX]
  77. CH = Cylinder High Register [HEX]
  78. DH = Device/Head Register [HEX]
  79. DC = Device Command Register [HEX]
  80. ER = Error register [HEX]
  81. ST = Status register [HEX]
  82. Powered_Up_Time is measured from power on, and printed as
  83. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  84. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  85.  
  86. Error 65535 occurred at disk power-on lifetime: 13665 hours (569 days + 9 hours)
  87. When the command that caused the error occurred, the device was active or idle.
  88.  
  89. After command completion occurred, registers were:
  90. ER ST SC SN CL CH DH
  91. -- -- -- -- -- -- --
  92. 10 51 01 6e 96 a1 e2
  93.  
  94. Commands leading to the command that caused the error were:
  95. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  96. -- -- -- -- -- -- -- -- ---------------- --------------------
  97. 37 00 01 6e 96 a1 e2 00 05:38:38.420 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  98. 27 00 00 6e 96 a1 e0 00 05:38:33.164 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  99. 37 00 00 6e 96 a1 e2 00 05:38:32.960 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  100. 27 00 01 6e 96 a1 e0 00 05:38:32.920 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  101. 37 00 01 6e 96 a1 e2 00 05:38:32.920 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  102.  
  103. Error 65534 occurred at disk power-on lifetime: 13665 hours (569 days + 9 hours)
  104. When the command that caused the error occurred, the device was active or idle.
  105.  
  106. After command completion occurred, registers were:
  107. ER ST SC SN CL CH DH
  108. -- -- -- -- -- -- --
  109. 10 51 01 6e 96 a1 e2
  110.  
  111. Commands leading to the command that caused the error were:
  112. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  113. -- -- -- -- -- -- -- -- ---------------- --------------------
  114. 37 00 01 6e 96 a1 e2 00 05:38:38.420 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  115. 27 00 00 6e 96 a1 e0 00 05:38:33.164 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  116. 37 00 00 6e 96 a1 e2 00 05:38:32.960 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  117. 27 00 01 af 9e a1 e0 00 05:38:32.920 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  118. 29 00 01 af 9e a1 e0 00 05:38:32.920 READ MULTIPLE EXT
  119.  
  120. Error 65533 occurred at disk power-on lifetime: 13650 hours (568 days + 18 hours)
  121. When the command that caused the error occurred, the device was active or idle.
  122.  
  123. After command completion occurred, registers were:
  124. ER ST SC SN CL CH DH
  125. -- -- -- -- -- -- --
  126. 10 51 01 6e 96 a1 e2
  127.  
  128. Commands leading to the command that caused the error were:
  129. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  130. -- -- -- -- -- -- -- -- ---------------- --------------------
  131. 37 00 01 6e 96 a1 e2 00 03:07:01.165 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  132. 27 00 00 6e 96 a1 e0 00 03:07:01.103 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  133. 37 00 00 6e 96 a1 e2 00 03:06:59.021 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  134. 27 00 01 6e 96 a1 e0 00 03:06:58.963 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  135. 37 00 01 6e 96 a1 e2 00 03:06:58.746 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  136.  
  137. Error 65532 occurred at disk power-on lifetime: 13650 hours (568 days + 18 hours)
  138. When the command that caused the error occurred, the device was active or idle.
  139.  
  140. After command completion occurred, registers were:
  141. ER ST SC SN CL CH DH
  142. -- -- -- -- -- -- --
  143. 10 51 01 6e 96 a1 e2
  144.  
  145. Commands leading to the command that caused the error were:
  146. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  147. -- -- -- -- -- -- -- -- ---------------- --------------------
  148. 37 00 01 6e 96 a1 e2 00 03:06:51.643 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  149. 27 00 00 6e 96 a1 e0 00 03:06:51.643 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  150. 37 00 00 6e 96 a1 e2 00 03:06:59.021 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  151. 27 00 01 af 9e a1 e0 00 03:06:58.963 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  152. 29 00 01 af 9e a1 e0 00 03:06:58.746 READ MULTIPLE EXT
  153.  
  154. Error 65531 occurred at disk power-on lifetime: 13638 hours (568 days + 6 hours)
  155. When the command that caused the error occurred, the device was active or idle.
  156.  
  157. After command completion occurred, registers were:
  158. ER ST SC SN CL CH DH
  159. -- -- -- -- -- -- --
  160. 10 51 01 6e 96 a1 e2
  161.  
  162. Commands leading to the command that caused the error were:
  163. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  164. -- -- -- -- -- -- -- -- ---------------- --------------------
  165. 37 00 01 6e 96 a1 e2 00 01:28:34.534 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  166. 27 00 00 6e 96 a1 e0 00 01:28:34.495 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  167. 37 00 00 6e 96 a1 e2 00 01:28:34.495 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  168. 27 00 01 6e 96 a1 e0 00 01:28:39.541 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  169. 37 00 01 6e 96 a1 e2 00 01:28:39.482 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  170.  
  171. SMART Self-test log structure revision number 1
  172.  
  173. SMART Selective self-test log data structure revision number 1
  174. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  175. 1 0 0 Not_testing
  176. 2 0 0 Not_testing
  177. 3 0 0 Not_testing
  178. 4 0 0 Not_testing
  179. 5 0 0 Not_testing
  180. Selective self-test flags (0x0):
  181. After scanning selected spans, do NOT read-scan remainder of disk.
  182. If Selective self-test is pending on power-up, resume after 0 minute delay.
  183. [user@localhost ~]$ sudo hdparm -I /dev/sda
  184.  
  185. /dev/sda:
  186.  
  187. ATA device, with non-removable media
  188. Model Number: MAXTOR STM3160815AS
  189. Serial Number: 6RA2SDYT
  190. Firmware Revision: 3.AAD
  191. Standards:
  192. Supported: 7 6 5 4
  193. Likely used: 7
  194. Configuration:
  195. Logical max current
  196. cylinders 16383 16383
  197. heads 16 16
  198. sectors/track 63 63
  199. --
  200. CHS current addressable sectors: 16514064
  201. LBA user addressable sectors: 268435455
  202. LBA48 user addressable sectors: 312579695
  203. Logical Sector size: 512 bytes
  204. Physical Sector size: 512 bytes
  205. device size with M = 1024*1024: 152626 MBytes
  206. device size with M = 1000*1000: 160040 MBytes (160 GB)
  207. cache/buffer size = 8192 KBytes
  208. Capabilities:
  209. LBA, IORDY(can be disabled)
  210. Queue depth: 32
  211. Standby timer values: spec'd by Standard, no device specific minimum
  212. R/W multiple sector transfer: Max = 16 Current = 16
  213. Recommended acoustic management value: 208, current value: 0
  214. DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
  215. Cycle time: min=120ns recommended=120ns
  216. PIO: pio0 pio1 pio2 pio3 pio4
  217. Cycle time: no flow control=120ns IORDY flow control=120ns
  218. Commands/features:
  219. Enabled Supported:
  220. * SMART feature set
  221. Security Mode feature set
  222. * Power Management feature set
  223. * Write cache
  224. * Look-ahead
  225. * Host Protected Area feature set
  226. * WRITE_BUFFER command
  227. * READ_BUFFER command
  228. * DOWNLOAD_MICROCODE
  229. SET_MAX security extension
  230. * 48-bit Address feature set
  231. * Device Configuration Overlay feature set
  232. * Mandatory FLUSH_CACHE
  233. * FLUSH_CACHE_EXT
  234. * SMART error logging
  235. * SMART self-test
  236. * General Purpose Logging feature set
  237. * Gen1 signaling speed (1.5Gb/s)
  238. * Gen2 signaling speed (3.0Gb/s)
  239. * Native Command Queueing (NCQ)
  240. * Phy event counters
  241. Device-initiated interface power management
  242. * Software settings preservation
  243. Security:
  244. Master password revision code = 65534
  245. supported
  246. not enabled
  247. not locked
  248. not frozen
  249. not expired: security count
  250. not supported: enhanced erase
  251. Checksum: correct
  252.  
  253. lshw о диске говорит:
  254. *-disk
  255. description: ATA Disk
  256. product: MAXTOR STM316081
  257. vendor: Maxtor
  258. physical id: 0.0.0
  259. bus info: scsi@0:0.0.0
  260. logical name: /dev/sda
  261. version: D
  262. serial: 6RA2SDYT
  263. size: 149GiB (160GB)
  264. capabilities: partitioned partitioned:dos
  265. configuration: ansiversion=5 logicalsectorsize=512 sectorsize=512 signature=ebab43fb
RAW Paste Data