Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- DDR Version 1.07 20161103
- In
- soft reset
- SRX
- Channel 0: DDR3, 666MHz
- Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
- Channel 1: DDR3, 666MHz
- Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
- 256B stride
- ch 0 ddrconfig = 0x101, ddrsize = 0x20
- ch 1 ddrconfig = 0x101, ddrsize = 0x20
- pmugrf_os_reg[2] = 0x32817281, stride = 0x9
- OUT
- Boot1: 2016-07-29, version: 1.05
- CPUId = 0x0
- ChipType = 10 1907
- SdmmcInit=2 0
- BootCapSize=100000
- UserCapSize=14910MB
- FwPartOffset=2000 , 100000
- SdmmcInit=0 0
- BootCapSize=0
- UserCapSize=15193MB
- FwPartOffset=2000 , 0
- run on sd0
- StorageInit ok = 82686
- LoadTrustBL
- No find bl30.bin
- No find bl32.bin
- theLoader 200000 155118
- LoaderFlag2: 0xc3524200
- WARNING: plat_rockchip_comm_sram_init:code:ff8d9000, 67000, ef0
- NOTICE: BL31: v1.2(debug):b995f80
- NOTICE: BL31: Built : 16:53:56, Nov 7 2016
- INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
- INFO: boot cpu mask: 0
- INFO: Vesion: 2016.0.01
- INFO: plat_rockchip_pmu_init(1211): pd status 3e
- INFO: BL31: Initializing runtime services
- INFO: BL31: Preparing for EL3 exit to normal world
- INFO: Entry point address = 0x200000
- INFO: SPSR = 0x3c9
- U-Boot 2017.02-RK3399-06-ga7c7ca8 (Apr 25 2017 - 15:10:21)
- CPU: rk3399
- cpu version = 0
- CPU's clock information:
- aplll = 816000000HZ
- apllb = 24000000HZ
- gpll = 594000000HZ
- aclk_periph_h = 148500000HZ, hclk_periph_h = 74250000HZ, pclk_periph_h = 37125000HZ
- aclk_periph_l0 = 99000000HZ, hclk_periph_l0 = 99000000HZ, pclk_periph_l0 = 49500000HZ
- hclk_periph_l1 = 99000000HZ, pclk_periph_l1 = 49500000HZ
- cpll = 800000000HZ
- dpll = 660000000HZ
- vpll = 24000000HZ
- npll = 24000000HZ
- ppll = 676000000HZ
- Board: Rockchip platform Board
- Uboot as second level loader
- DRAM: Found dram banks: 1
- Adding bank:0000000000200000(000000007fe00000)
- 128 MiB
- SdmmcInit = 0 0
- SDCard Boot.
- storage init OK!
- Using default environment
- GetParam
- Load FDT from resource image.
- no key node
- usb bc: can find node by path: /dwc-control-usb/usb_bc
- pmic:rk808
- can't find dts node for pwm1
- Cannot find regulator pwm id
- CPU's clock information:
- aplll = 816000000HZ
- apllb = 24000000HZ
- gpll = 594000000HZ
- aclk_periph_h = 148500000HZ, hclk_periph_h = 74250000HZ, pclk_periph_h = 37125000HZ
- aclk_periph_l0 = 99000000HZ, hclk_periph_l0 = 99000000HZ, pclk_periph_l0 = 49500000HZ
- hclk_periph_l1 = 99000000HZ, pclk_periph_l1 = 49500000HZ
- cpll = 800000000HZ
- dpll = 660000000HZ
- vpll = 24000000HZ
- npll = 24000000HZ
- ppll = 676000000HZ
- Can't find dts node for fuel guage cw201x
- can't find dts node for ec-battery
- Can't find dts node for charger bq25700
- SecureBootEn = 0, SecureBootLock = 0
- #Boot ver: 0000-00-00#0.00
- empty serial no.
- normal boot.
- checkKey
- vbus = 1
- no fuel gauge found
- no fuel gauge found
- Can't find display display route node
- read logo on state from dts [0]
- no fuel gauge found
- misc partition not found!
- Hit any key to stop autoboot: 0
- load fdt from resouce.
- Secure Boot state: 0
- kernel @ 0x00280000 (0x014e0a00)
- ramdisk @ 0x05bf0000 (0x00000000)
- bootrk: do_bootm_linux...
- Loading Device Tree to 0000000005600000, end 000000000560f8e6 ... OK
- Add bank:0000000000200000, 000000007fe00000
- Starting kernel ...
- [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
- [ 0.000000] Linux version 4.16.0-kamikaze (msaun@geminid) (gcc version 8.1.0 (GCC)) #1 SMP PREEMPT Tue May 29 12:41:33 ACST 2018
- [ 0.000000] Machine model: Firefly-RK3399 Board
- [ 0.000000] earlycon: uart8250 at MMIO32 0x00000000ff1a0000 (options '')
- [ 0.000000] bootconsole [uart8250] enabled
- [ 0.000000] efi: Getting EFI parameters from FDT:
- [ 0.000000] efi: UEFI not found.
- [ 0.000000] cma: Reserved 16 MiB at 0x000000007f000000
- [ 0.000000] NUMA: No NUMA configuration found
- [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000007fffffff]
- [ 0.000000] NUMA: NODE_DATA [mem 0x7efb0d80-0x7efb287f]
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA32 [mem 0x0000000000200000-0x000000007fffffff]
- [ 0.000000] Normal empty
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000200000-0x000000007fffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x000000007fffffff]
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: PSCIv1.0 detected in firmware.
- [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
- [ 0.000000] psci: SMC Calling Convention v1.0
- [ 0.000000] random: fast init done
- [ 0.000000] percpu: Embedded 24 pages/cpu @ (ptrval) s57880 r8192 d32232 u98304
- [ 0.000000] Detected VIPT I-cache on CPU0
- [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 515592
- [ 0.000000] Policy zone: DMA32
- [ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 console=uart8250,mmio32,0xff1a0000 earlyprintk root=PARTUUID=893b6035-aa1c-4f971
- [ 0.000000] Memory: 2023164K/2095104K available (11644K kernel code, 1282K rwdata, 7280K rodata, 1152K init, 414K bss, 55556K reserved, 16384K cma-r)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6.
- [ 0.000000] Tasks RCU enabled.
- [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
- [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
- [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
- [ 0.000000] GICv3: Distributor has no Range Selector support
- [ 0.000000] GICv3: no VLPI support, no direct LPI support
- [ 0.000000] ITS [mem 0xfee20000-0xfee3ffff]
- [ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @7c880000 (flat, esz 8, psz 64K, shr 0)
- [ 0.000000] ITS: using cache flushing for cmd queue
- [ 0.000000] GIC: using LPI property table @0x000000007c840000
- [ 0.000000] ITS: Allocated 1792 chunks for LPIs
- [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
- [ 0.000000] CPU0: using LPI pending table @0x000000007c850000
- [ 0.000000] GIC: using cache flushing for LPI property table
- [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
- [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
- [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
- [ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
- [ 0.001973] Console: colour dummy device 80x25
- [ 0.002496] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
- [ 0.003443] pid_max: default: 32768 minimum: 301
- [ 0.003942] Security Framework initialized
- [ 0.005358] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.006553] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.007239] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.007871] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.022521] ASID allocator initialised with 32768 entries
- [ 0.030512] Hierarchical SRCU implementation.
- [ 0.038612] Platform MSI: interrupt-controller@fee20000 domain created
- [ 0.039517] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
- [ 0.043502] EFI services will not be available.
- [ 0.050695] smp: Bringing up secondary CPUs ...
- [ 0.078866] Detected VIPT I-cache on CPU1
- [ 0.078899] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
- [ 0.078945] CPU1: using LPI pending table @0x000000007c120000
- [ 0.078987] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
- [ 0.106916] Detected VIPT I-cache on CPU2
- [ 0.106939] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
- [ 0.106983] CPU2: using LPI pending table @0x000000007c150000
- [ 0.107010] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
- [ 0.134984] Detected VIPT I-cache on CPU3
- [ 0.135005] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
- [ 0.135046] CPU3: using LPI pending table @0x000000007c170000
- [ 0.135072] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
- [ 0.165698] Detected PIPT I-cache on CPU4
- [ 0.166996] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
- [ 0.169521] CPU4: using LPI pending table @0x000000007c1b0000
- [ 0.170730] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
- [ 0.205248] Detected PIPT I-cache on CPU5
- [ 0.206423] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
- [ 0.208864] CPU5: using LPI pending table @0x000000007c1e0000
- [ 0.209945] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
- [ 0.213676] smp: Brought up 1 node, 6 CPUs
- [ 0.224923] SMP: Total of 6 processors activated.
- [ 0.225365] CPU features: detected feature: GIC system register CPU interface
- [ 0.226031] CPU features: detected feature: 32-bit EL0 Support
- [ 0.226567] CPU features: detected feature: Kernel page table isolation (KPTI)
- [ 0.303834] CPU: All CPU(s) started at EL2
- [ 0.304765] alternatives: patching kernel code
- [ 0.308307] devtmpfs: initialized
- [ 0.320228] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
- [ 0.321411] futex hash table entries: 2048 (order: 6, 262144 bytes)
- [ 0.323377] xor: measuring software checksum speed
- [ 0.360702] 8regs : 1618.000 MB/sec
- [ 0.400857] 8regs_prefetch: 1400.000 MB/sec
- [ 0.441082] 32regs : 1860.000 MB/sec
- [ 0.481271] 32regs_prefetch: 1574.000 MB/sec
- [ 0.481699] xor: using function: 32regs (1860.000 MB/sec)
- [ 0.482233] pinctrl core: initialized pinctrl subsystem
- [ 0.485430] DMI not present or invalid.
- [ 0.486897] NET: Registered protocol family 16
- [ 0.491146] audit: initializing netlink subsys (disabled)
- [ 0.492263] audit: type=2000 audit(0.484:1): state=initialized audit_enabled=0 res=1
- [ 0.498539] cpuidle: using governor menu
- [ 0.499767] vdso: 2 pages (1 code @ 000000002902f2e8, 1 data @ 00000000282e272a)
- [ 0.500637] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
- [ 0.517969] DMA: preallocated 256 KiB pool for atomic allocations
- [ 0.521520] Serial: AMBA PL011 UART driver
- [ 0.596563] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
- [ 0.600213] cryptd: max_cpu_qlen set to 1000
- [ 0.672885] raid6: int64x1 gen() 290 MB/s
- [ 0.740891] raid6: int64x1 xor() 296 MB/s
- [ 0.809331] raid6: int64x2 gen() 453 MB/s
- [ 0.877633] raid6: int64x2 xor() 399 MB/s
- [ 0.945923] raid6: int64x4 gen() 662 MB/s
- [ 1.014210] raid6: int64x4 xor() 494 MB/s
- [ 1.082578] raid6: int64x8 gen() 789 MB/s
- [ 1.150893] raid6: int64x8 xor() 513 MB/s
- [ 1.219204] raid6: neonx1 gen() 505 MB/s
- [ 1.287542] raid6: neonx1 xor() 585 MB/s
- [ 1.355929] raid6: neonx2 gen() 763 MB/s
- [ 1.424245] raid6: neonx2 xor() 782 MB/s
- [ 1.492550] raid6: neonx4 gen() 1002 MB/s
- [ 1.560877] raid6: neonx4 xor() 953 MB/s
- [ 1.629213] raid6: neonx8 gen() 1050 MB/s
- [ 1.697538] raid6: neonx8 xor() 988 MB/s
- [ 1.697931] raid6: using algorithm neonx8 gen() 1050 MB/s
- [ 1.698449] raid6: .... xor() 988 MB/s, rmw enabled
- [ 1.698902] raid6: using neon recovery algorithm
- [ 1.700771] ACPI: Interpreter disabled.
- [ 1.705029] vcc3v3_pcie: supplied by dc_12v
- [ 1.707082] vcc_sys: supplied by dc_12v
- [ 1.709015] iommu: Adding device ff8f0000.vop to group 0
- [ 1.709675] iommu: Adding device ff900000.vop to group 1
- [ 1.713221] vgaarb: loaded
- [ 1.714035] SCSI subsystem initialized
- [ 1.715992] usbcore: registered new interface driver usbfs
- [ 1.716639] usbcore: registered new interface driver hub
- [ 1.717400] usbcore: registered new device driver usb
- [ 1.720051] pps_core: LinuxPPS API ver. 1 registered
- [ 1.720574] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 1.721470] PTP clock support registered
- [ 1.722262] EDAC MC: Ver: 3.0.0
- [ 1.724994] Advanced Linux Sound Architecture Driver Initialized.
- [ 1.729947] clocksource: Switched to clocksource arch_sys_counter
- [ 1.732209] VFS: Disk quotas dquot_6.6.0
- [ 1.732668] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 1.733531] pnp: PnP ACPI: disabled
- [ 1.748609] NET: Registered protocol family 2
- [ 1.751045] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes)
- [ 1.751871] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
- [ 1.752792] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
- [ 1.753680] TCP: Hash tables configured (established 16384 bind 16384)
- [ 1.754701] UDP hash table entries: 1024 (order: 3, 32768 bytes)
- [ 1.755329] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
- [ 1.756180] NET: Registered protocol family 1
- [ 1.760554] RPC: Registered named UNIX socket transport module.
- [ 1.761105] RPC: Registered udp transport module.
- [ 1.761538] RPC: Registered tcp transport module.
- [ 1.761995] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 1.770002] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
- [ 1.773271] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
- [ 1.775286] kvm [1]: 8-bit VMID
- [ 1.777691] kvm [1]: vgic-v2@fff20000
- [ 1.778653] kvm [1]: GIC system register CPU interface enabled
- [ 1.782992] kvm [1]: vgic interrupt IRQ10
- [ 1.785565] kvm [1]: Hyp mode initialized successfully
- [ 1.799101] Initialise system trusted keyrings
- [ 1.800163] workingset: timestamp_bits=44 max_order=19 bucket_order=0
- [ 1.812178] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 1.815111] NFS: Registering the id_resolver key type
- [ 1.815711] Key type id_resolver registered
- [ 1.816098] Key type id_legacy registered
- [ 1.816476] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
- [ 1.817453] SGI XFS with security attributes, no debug enabled
- [ 1.821408] 9p: Installing v9fs 9p2000 file system support
- [ 1.843221] Key type asymmetric registered
- [ 1.843706] Asymmetric key parser 'x509' registered
- [ 1.844488] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
- [ 1.845654] io scheduler noop registered
- [ 1.846724] io scheduler cfq registered (default)
- [ 1.847167] io scheduler mq-deadline registered
- [ 1.847592] io scheduler kyber registered
- [ 1.856141] vcc5v0_host: supplied by vcc_sys
- [ 1.888846] EINJ: ACPI disabled.
- [ 1.910159] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
- [ 1.910992] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
- [ 1.919841] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
- [ 1.920623] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
- [ 1.930401] pwm-regulator: supplied by regulator-dummy
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement