Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Linux version 5.16.0-rc3-00291-g6fc4b6533e6c (somlo@glsvmlin.ini.cmu.edu) (riscv64-unknown-linux-gnu-gcc (GCC) 11.1.0, GNU ld (GNU Binutils) 2.37) #796 SMP Mon Dec 6 09:31:35 EST 2021
- [ 0.000000] OF: fdt: Ignoring memory range 0x80000000 - 0x80200000
- [ 0.000000] Machine model: freechips,rocketchip-unknown
- [ 0.000000] earlycon: sbi0 at I/O port 0x0 (options '')
- [ 0.000000] printk: bootconsole [sbi0] enabled
- [ 0.000000] efi: UEFI not found.
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA32 [mem 0x0000000080200000-0x00000000bfffffff]
- [ 0.000000] Normal empty
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000080200000-0x00000000bfffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000080200000-0x00000000bfffffff]
- [ 0.000000] SBI specification v0.1 detected
- [ 0.000000] riscv: ISA extensions acdfim
- [ 0.000000] riscv: ELF capabilities acdfim
- [ 0.000000] percpu: Embedded 13 pages/cpu s23896 r0 d29352 u53248
- [ 0.000000] pcpu-alloc: s23896 r0 d29352 u53248 alloc=13*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 257544
- [ 0.000000] Kernel command line: earlycon=sbi console=liteuart swiotlb=noforce
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
- [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
- [ 0.000000] Memory: 1012088K/1046528K available (4327K kernel code, 3966K rwdata, 2048K rodata, 2903K init, 280K bss, 34440K reserved, 0K cma-reserved)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
- [ 0.000000] rcu: Hierarchical RCU implementation.
- [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
- [ 0.000000] Tracing variant of Tasks RCU enabled.
- [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
- [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
- [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
- [ 0.000000] riscv-intc: 64 local interrupts mapped
- [ 0.000000] plic: interrupt-controller@c000000: mapped 4 interrupts with 2 handlers for 4 contexts.
- [ 0.000000] random: get_random_bytes called from start_kernel+0x4c6/0x6b8 with crng_init=0
- [ 0.000000] riscv_timer_init_dt: Registering clocksource cpuid [0] hartid [1]
- [ 0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 7052723233920 ns
- [ 0.000060] sched_clock: 64 bits at 500kHz, resolution 2000ns, wraps every 4398046511000ns
- [ 0.013572] Console: colour dummy device 128x32
- [ 0.019226] Calibrating delay loop (skipped), value calculated using timer frequency.. 1.00 BogoMIPS (lpj=5000)
- [ 0.030152] pid_max: default: 32768 minimum: 301
- [ 0.041976] LSM: Security Framework initializing
- [ 0.051828] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
- [ 0.059640] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
- [ 0.166968] ASID allocator disabled (0 bits)
- [ 0.178734] rcu: Hierarchical SRCU implementation.
- [ 0.197156] EFI services will not be available.
- [ 0.213116] smp: Bringing up secondary CPUs ...
- [ 0.257292] smp: Brought up 1 node, 2 CPUs
- [ 0.285956] devtmpfs: initialized
- [ 0.381774] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
- [ 0.392256] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
- [ 0.421112] NET: Registered PF_NETLINK/PF_ROUTE protocol family
- [ 0.889080] pps_core: LinuxPPS API ver. 1 registered
- [ 0.893378] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.904152] PTP clock support registered
- [ 0.947940] clocksource: Switched to clocksource riscv_clocksource
- [ 1.451472] NET: Registered PF_INET protocol family
- [ 1.465052] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
- [ 1.524038] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
- [ 1.534434] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
- [ 1.548218] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear)
- [ 1.563294] TCP: Hash tables configured (established 8192 bind 8192)
- [ 1.576598] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
- [ 1.585268] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
- [ 1.602914] NET: Registered PF_UNIX/PF_LOCAL protocol family
- [ 1.670418] workingset: timestamp_bits=46 max_order=18 bucket_order=0
- [ 2.616046] LiteX SoC Controller driver initialized
- [ 5.724896] 12006800.serial: ttyLXU0 at MMIO 0x0 (irq = 0, base_baud = 0) is a liteuart
- [ 5.738916] printk: console [liteuart0] enabled
- [ 5.738916] printk: console [liteuart0] enabled
- [ 5.748072] printk: bootconsole [sbi0] disabled
- [ 5.748072] printk: bootconsole [sbi0] disabled
- [ 6.083388] loop: module loaded
- [ 6.813886] liteeth 12001000.mac eth0: irq 2 slots: tx 2 rx 2 size 2048
- [ 6.858454] litex-mmc 12005000.mmc: sdclk_freq=12500000: set to 12500000 via div=4
- [ 6.940270] NET: Registered PF_INET6 protocol family
- [ 6.953358] litex-mmc 12005000.mmc: sdclk_freq=0: set to 195312 via div=256
- [ 7.015446] Segment Routing with IPv6
- [ 7.020506] In-situ OAM (IOAM) with IPv6
- [ 7.026994] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
- [ 7.068504] NET: Registered PF_PACKET protocol family
- [ 7.151726] Warning: unable to open an initial console.
- [ 7.316814] Freeing unused kernel image (initmem) memory: 2900K
- [ 7.359414] Run /init as init process
- [ 7.362418] with arguments:
- [ 7.365368] /init
- [ 7.368522] with environment:
- [ 7.370966] HOME=/
- [ 7.373310] TERM=linux
- #
- # cat /proc/cpuinfo
- processor : 0
- hart : 1
- isa : rv64imafdc
- mmu : sv39
- uarch : sifive,rocket0
- processor : 1
- hart : 0
- isa : rv64imafdc
- mmu : sv39
- uarch : sifive,rocket0
- #
Add Comment
Please, Sign In to add comment