Setting up EdgeRouter X for Telia TV

Setting up EdgeRouter X for Telia TV

Do the following through GUI:
1. Run the Basic setup wizard (set eth0 as WAN)

2. Create three VLANs on switch0: 1 (Internet), 2 (Local) and 4 (IPTV)

3. Delete the IP-address from eth0

4. Change eth0 to switch0.1 under the "Firewall/NAT" menu -> "Firewall Policies”

5. Change eth0 to switch0.1 under the "Firewall/NAT" menu -> "NAT"

Do the following through Config Tree:
6. Change switch0 to switch0.2 under the “service -> dns -> forwarding -> listen-on”

Do the following through CLI:
7. Turn on VLAN-aware for switch0:
set interfaces switch switch0 switch-port vlan-aware enable

8. Put PVID 1 and VID 4 on eth0:
set interfaces switch switch0 switch-port interface eth0 vlan pvid 1
set interfaces switch switch0 switch-port interface eth0 vlan vid 4

9. Put PVID 2 on to eth1, eth2 and eth4:
set interfaces switch switch0 switch-port interface eth1 vlan pvid 2
set interfaces switch switch0 switch-port interface eth2 vlan pvid 2
set interfaces switch switch0 switch-port interface eth4 vlan pvid 2

10. Put PVID 4 on to eth3:
set interfaces switch switch0 switch-port interface eth3 vlan pvid 4

11. Delete the IP number from switch0:
delete interfaces switch switch0 address

12. Put the IP number that you removed from switch0 on to switch0.2:
set interfaces switch switch0 vif 2 address 192.168.1.1/24

13. Save the configuration:
commit; save;

Do the following through GUI:
14. Set switch0.1 interface IP-address to DHCP