Guest User

dmesg-4.4.154-1128-rockchip-ayufan-g61b4b1151f9a-sata-errors

a guest
Jan 12th, 2019
457
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [ 0.000000] Booting Linux on physical CPU 0x0
  2. [ 0.000000] Initializing cgroup subsys cpuset
  3. [ 0.000000] Initializing cgroup subsys cpu
  4. [ 0.000000] Initializing cgroup subsys cpuacct
  5. [ 0.000000] Linux version 4.4.154-1128-rockchip-ayufan-g61b4b1151f9a (root@runner-f725ff63-project-5943294-concurrent-0) (gcc version 7.3.0 (Ubuntu/Linaro 7.3.0-16ubuntu3) ) #1 SMP Tue Dec 25 14:31:31 UTC 2018
  6. [ 0.000000] Boot CPU: AArch64 Processor [410fd034]
  7. [ 0.000000] earlycon: Early serial console at MMIO32 0xff1a0000 (options '')
  8. [ 0.000000] bootconsole [uart0] enabled
  9. [ 0.000000] Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x0000000000000000, size 0 MiB
  10. [ 0.000000] On node 0 totalpages: 1015296
  11. [ 0.000000] DMA zone: 15864 pages used for memmap
  12. [ 0.000000] DMA zone: 0 pages reserved
  13. [ 0.000000] DMA zone: 1015296 pages, LIFO batch:31
  14. [ 0.000000] psci: probing for conduit method from DT.
  15. [ 0.000000] psci: PSCIv1.0 detected in firmware.
  16. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  17. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  18. [ 0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc0f7edd000 s46248 r8192 d31576 u86016
  19. [ 0.000000] pcpu-alloc: s46248 r8192 d31576 u86016 alloc=21*4096
  20. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
  21. [ 0.000000] Detected VIPT I-cache on CPU0
  22. [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
  23. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 999432
  24. [ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 swiotlb=1 rw panic=10 init=/sbin/init coherent_pool=1M ethaddr=9e:da:8f:ae:43:c3 eth1addr= serial=96ed659a4f7abc3 cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 root=LABEL=linux-root rootwait rootfstype=ext4
  25. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  26. [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
  27. [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
  28. [ 0.000000] software IO TLB [mem 0xf7e95000-0xf7ed5000] (0MB) mapped at [ffffffc0f7e95000-ffffffc0f7ed4fff]
  29. [ 0.000000] Memory: 3961232K/4061184K available (12158K kernel code, 1726K rwdata, 4388K rodata, 1216K init, 768K bss, 99952K reserved, 0K cma-reserved)
  30. [ 0.000000] Virtual kernel memory layout:
  31. modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
  32. vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000 ( 246 GB)
  33. .init : 0xffffff80090b0000 - 0xffffff80091e0000 ( 1216 KB)
  34. .text : 0xffffff8008080000 - 0xffffff8008c60000 ( 12160 KB)
  35. .rodata : 0xffffff8008c60000 - 0xffffff80090b0000 ( 4416 KB)
  36. .data : 0xffffff80091e0000 - 0xffffff800938f808 ( 1727 KB)
  37. vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
  38. 0xffffffbdc0008000 - 0xffffffbdc3e00000 ( 61 MB actual)
  39. fixed : 0xffffffbffe7fb000 - 0xffffffbffec00000 ( 4116 KB)
  40. PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000 ( 16 MB)
  41. memory : 0xffffffc000200000 - 0xffffffc0f8000000 ( 3966 MB)
  42. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
  43. [ 0.000000] Hierarchical RCU implementation.
  44. [ 0.000000] Build-time adjustment of leaf fanout to 64.
  45. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
  46. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
  47. [ 0.000000] NR_IRQS:64 nr_irqs:64 0
  48. [ 0.000000] GIC: Using split EOI/Deactivate mode
  49. [ 0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000
  50. [ 0.000000] ITS: allocated 65536 Devices @f2900000 (psz 64K, shr 0)
  51. [ 0.000000] ITS: using cache flushing for cmd queue
  52. [ 0.000000] GIC: using LPI property table @0x00000000f2890000
  53. [ 0.000000] ITS: Allocated 1792 chunks for LPIs
  54. [ 0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000
  55. [ 0.000000] CPU0: using LPI pending table @0x00000000f28a0000
  56. [ 0.000000] GIC: using cache flushing for LPI property table
  57. [ 0.000000] GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
  58. [ 0.000000] GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
  59. [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
  60. [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
  61. [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
  62. [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
  63. [ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work
  64. [ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work
  65. [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
  66. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  67. [ 0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  68. [ 0.001992] Console: colour dummy device 80x25
  69. [ 0.002447] console [tty0] enabled
  70. [ 0.002772] bootconsole [uart0] disabled
  71. [ 0.003154] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  72. [ 0.003182] pid_max: default: 32768 minimum: 301
  73. [ 0.003300] Security Framework initialized
  74. [ 0.003315] Yama: becoming mindful.
  75. [ 0.003345] AppArmor: AppArmor disabled by boot time parameter
  76. [ 0.003410] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
  77. [ 0.003430] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
  78. [ 0.004167] Initializing cgroup subsys io
  79. [ 0.004192] Initializing cgroup subsys memory
  80. [ 0.004228] Initializing cgroup subsys devices
  81. [ 0.004248] Initializing cgroup subsys freezer
  82. [ 0.004267] Initializing cgroup subsys net_cls
  83. [ 0.004285] Initializing cgroup subsys perf_event
  84. [ 0.004306] Initializing cgroup subsys net_prio
  85. [ 0.004328] Initializing cgroup subsys hugetlb
  86. [ 0.004345] Initializing cgroup subsys pids
  87. [ 0.004391] ftrace: allocating 45079 entries in 177 pages
  88. [ 0.110373] sched-energy: Sched-energy-costs installed from DT
  89. [ 0.110401] CPU0: update cpu_capacity 401
  90. [ 0.110461] ASID allocator initialised with 32768 entries
  91. [ 0.113451] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
  92. [ 0.113928] Platform MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
  93. [ 0.115201] Detected VIPT I-cache on CPU1
  94. [ 0.115231] CPU1: found redistributor 1 region 0:0x00000000fef20000
  95. [ 0.115256] CPU1: using LPI pending table @0x00000000f2b40000
  96. [ 0.115299] CPU1: update cpu_capacity 401
  97. [ 0.115302] CPU1: Booted secondary processor [410fd034]
  98. [ 0.115831] Detected VIPT I-cache on CPU2
  99. [ 0.115851] CPU2: found redistributor 2 region 0:0x00000000fef40000
  100. [ 0.115873] CPU2: using LPI pending table @0x00000000f2b70000
  101. [ 0.115901] CPU2: update cpu_capacity 401
  102. [ 0.115904] CPU2: Booted secondary processor [410fd034]
  103. [ 0.116420] Detected VIPT I-cache on CPU3
  104. [ 0.116440] CPU3: found redistributor 3 region 0:0x00000000fef60000
  105. [ 0.116463] CPU3: using LPI pending table @0x00000000f2bc0000
  106. [ 0.116489] CPU3: update cpu_capacity 401
  107. [ 0.116493] CPU3: Booted secondary processor [410fd034]
  108. [ 0.117008] Detected PIPT I-cache on CPU4
  109. [ 0.117031] CPU4: found redistributor 100 region 0:0x00000000fef80000
  110. [ 0.117065] CPU4: using LPI pending table @0x00000000f2bf0000
  111. [ 0.117101] CPU4: update cpu_capacity 1024
  112. [ 0.117104] CPU4: Booted secondary processor [410fd082]
  113. [ 0.117676] Detected PIPT I-cache on CPU5
  114. [ 0.117694] CPU5: found redistributor 101 region 0:0x00000000fefa0000
  115. [ 0.117727] CPU5: using LPI pending table @0x00000000f2030000
  116. [ 0.117754] CPU5: update cpu_capacity 1024
  117. [ 0.117757] CPU5: Booted secondary processor [410fd082]
  118. [ 0.117839] Brought up 6 CPUs
  119. [ 0.118516] SMP: Total of 6 processors activated.
  120. [ 0.118547] CPU features: detected feature: GIC system register CPU interface
  121. [ 0.118585] CPU: All CPU(s) started at EL2
  122. [ 0.118649] alternatives: patching kernel code
  123. [ 0.120023] devtmpfs: initialized
  124. [ 0.135686] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  125. [ 0.135740] futex hash table entries: 2048 (order: 5, 131072 bytes)
  126. [ 0.136206] xor: measuring software checksum speed
  127. [ 0.173473] 8regs : 2874.000 MB/sec
  128. [ 0.213534] 8regs_prefetch: 2571.000 MB/sec
  129. [ 0.253596] 32regs : 3243.000 MB/sec
  130. [ 0.293657] 32regs_prefetch: 2865.000 MB/sec
  131. [ 0.293677] xor: using function: 32regs (3243.000 MB/sec)
  132. [ 0.293709] pinctrl core: initialized pinctrl subsystem
  133. [ 0.293955] regulator-dummy: no parameters
  134. [ 0.295279] Failed to find legacy iommu devices
  135. [ 0.295663] NET: Registered protocol family 16
  136. [ 0.305995] cpuidle: using governor ladder
  137. [ 0.318019] cpuidle: using governor menu
  138. [ 0.318347] vdso: 2 pages (1 code @ ffffff8008c66000, 1 data @ ffffff80091e4000)
  139. [ 0.318401] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  140. [ 0.318834] DMA: preallocated 1024 KiB pool for atomic allocations
  141. [ 0.333292] gpiochip_add_data: registered GPIOs 0 to 31 on device: gpio0
  142. [ 0.333368] gpiochip_add_data: registered GPIOs 32 to 63 on device: gpio1
  143. [ 0.333443] gpiochip_add_data: registered GPIOs 64 to 95 on device: gpio2
  144. [ 0.333514] gpiochip_add_data: registered GPIOs 96 to 127 on device: gpio3
  145. [ 0.333592] gpiochip_add_data: registered GPIOs 128 to 159 on device: gpio4
  146. [ 0.425941] raid6: int64x1 gen() 474 MB/s
  147. [ 0.494022] raid6: int64x1 xor() 409 MB/s
  148. [ 0.562077] raid6: int64x2 gen() 655 MB/s
  149. [ 0.630182] raid6: int64x2 xor() 599 MB/s
  150. [ 0.698312] raid6: int64x4 gen() 1017 MB/s
  151. [ 0.766399] raid6: int64x4 xor() 676 MB/s
  152. [ 0.834511] raid6: int64x8 gen() 770 MB/s
  153. [ 0.902612] raid6: int64x8 xor() 632 MB/s
  154. [ 0.970749] raid6: neonx1 gen() 995 MB/s
  155. [ 1.038842] raid6: neonx1 xor() 678 MB/s
  156. [ 1.106961] raid6: neonx2 gen() 1332 MB/s
  157. [ 1.175039] raid6: neonx2 xor() 996 MB/s
  158. [ 1.243149] raid6: neonx4 gen() 1799 MB/s
  159. [ 1.311223] raid6: neonx4 xor() 1198 MB/s
  160. [ 1.379346] raid6: neonx8 gen() 1695 MB/s
  161. [ 1.447448] raid6: neonx8 xor() 1265 MB/s
  162. [ 1.447467] raid6: using algorithm neonx4 gen() 1799 MB/s
  163. [ 1.447486] raid6: .... xor() 1198 MB/s, rmw enabled
  164. [ 1.447504] raid6: using intx1 recovery algorithm
  165. [ 1.448355] of_get_named_gpiod_flags: parsed 'rockchip,power-ctrl' property of node '/rockchip-suspend[0]' - status (0)
  166. [ 1.448395] of_get_named_gpiod_flags: parsed 'rockchip,power-ctrl' property of node '/rockchip-suspend[1]' - status (0)
  167. [ 1.448634] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/dc-12v[0]'
  168. [ 1.448656] dc_12v: 12000 mV
  169. [ 1.448827] reg-fixed-voltage dc-12v: dc_12v supplying 12000000uV
  170. [ 1.448986] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc3v3-pcie-regulator[0]' - status (0)
  171. [ 1.449030] reg-fixed-voltage vcc3v3-pcie-regulator: Looking up vin-supply from device tree
  172. [ 1.449067] vcc3v3_pcie: supplied by dc_12v
  173. [ 1.449091] dc_12v: could not add device link regulator.2 err -2
  174. [ 1.449131] vcc3v3_pcie: 3300 mV
  175. [ 1.449284] reg-fixed-voltage vcc3v3-pcie-regulator: vcc3v3_pcie supplying 3300000uV
  176. [ 1.449338] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc1v8-s0[0]'
  177. [ 1.449354] vcc1v8_s0: 1800 mV
  178. [ 1.449513] reg-fixed-voltage vcc1v8-s0: vcc1v8_s0 supplying 1800000uV
  179. [ 1.449566] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc-sys[0]'
  180. [ 1.449583] reg-fixed-voltage vcc-sys: Looking up vin-supply from device tree
  181. [ 1.449620] vcc_sys: supplied by dc_12v
  182. [ 1.449641] dc_12v: could not add device link regulator.4 err -2
  183. [ 1.449669] vcc_sys: 5000 mV
  184. [ 1.449810] reg-fixed-voltage vcc-sys: vcc_sys supplying 5000000uV
  185. [ 1.449859] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc-phy-regulator[0]'
  186. [ 1.449875] vcc_phy: no parameters
  187. [ 1.450034] reg-fixed-voltage vcc-phy-regulator: vcc_phy supplying 0uV
  188. [ 1.450085] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc3v3-sys[0]'
  189. [ 1.450109] reg-fixed-voltage vcc3v3-sys: Looking up vin-supply from device tree
  190. [ 1.450145] vcc3v3_sys: supplied by vcc_sys
  191. [ 1.450166] vcc_sys: could not add device link regulator.6 err -2
  192. [ 1.450194] vcc3v3_sys: 3300 mV
  193. [ 1.450342] reg-fixed-voltage vcc3v3-sys: vcc3v3_sys supplying 3300000uV
  194. [ 1.450481] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc5v0-host-regulator[0]' - status (0)
  195. [ 1.450526] vcc5v0_host: no parameters
  196. [ 1.450689] reg-fixed-voltage vcc5v0-host-regulator: vcc5v0_host supplying 0uV
  197. [ 1.451259] iommu: Adding device ff8f0000.vop to group 0
  198. [ 1.451357] platform ff8f0000.vop: iommu /iommu@ff8f3f00 not found
  199. [ 1.451378] iommu: Removing device ff8f0000.vop from group 0
  200. [ 1.451450] iommu: Adding device ff900000.vop to group 0
  201. [ 1.452664] SCSI subsystem initialized
  202. [ 1.452851] libata version 3.00 loaded.
  203. [ 1.453023] usbcore: registered new interface driver usbfs
  204. [ 1.453081] usbcore: registered new interface driver hub
  205. [ 1.453174] usbcore: registered new device driver usb
  206. [ 1.453281] media: Linux media interface: v0.10
  207. [ 1.453330] Linux video capture interface: v2.00
  208. [ 1.453404] pps_core: LinuxPPS API ver. 1 registered
  209. [ 1.453424] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  210. [ 1.453466] PTP clock support registered
  211. [ 1.454513] Advanced Linux Sound Architecture Driver Initialized.
  212. [ 1.455035] Bluetooth: Core ver 2.21
  213. [ 1.455074] NET: Registered protocol family 31
  214. [ 1.455094] Bluetooth: HCI device and connection manager initialized
  215. [ 1.455118] Bluetooth: HCI socket layer initialized
  216. [ 1.455140] Bluetooth: L2CAP socket layer initialized
  217. [ 1.455176] Bluetooth: SCO socket layer initialized
  218. [ 1.455585] NetLabel: Initializing
  219. [ 1.455605] NetLabel: domain hash size = 128
  220. [ 1.455623] NetLabel: protocols = UNLABELED CIPSOv4
  221. [ 1.455672] NetLabel: unlabeled traffic allowed by default
  222. [ 1.456455] clocksource: Switched to clocksource arch_sys_counter
  223. [ 1.520686] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
  224. [ 1.520929] NET: Registered protocol family 2
  225. [ 1.521371] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
  226. [ 1.521618] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes)
  227. [ 1.522426] TCP: Hash tables configured (established 32768 bind 32768)
  228. [ 1.522553] UDP hash table entries: 2048 (order: 5, 196608 bytes)
  229. [ 1.522770] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes)
  230. [ 1.523171] NET: Registered protocol family 1
  231. [ 1.523473] RPC: Registered named UNIX socket transport module.
  232. [ 1.523494] RPC: Registered udp transport module.
  233. [ 1.523513] RPC: Registered tcp transport module.
  234. [ 1.523531] RPC: Registered tcp NFSv4.1 backchannel transport module.
  235. [ 1.523701] PCI: CLS 0 bytes, default 64
  236. [ 1.524206] Trying to unpack rootfs image as initramfs...
  237. [ 1.838339] Freeing initrd memory: 6372K
  238. [ 1.838897] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
  239. [ 1.839012] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
  240. [ 1.840112] kvm [1]: 8-bit VMID
  241. [ 1.840132] kvm [1]: Hyp mode initialized successfully
  242. [ 1.840267] kvm [1]: interrupt-controller@fff20000 IRQ10
  243. [ 1.840505] kvm [1]: timer IRQ12
  244. [ 1.843562] audit: initializing netlink subsys (disabled)
  245. [ 1.843627] audit: type=2000 audit(1.776:1): initialized
  246. [ 1.844356] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  247. [ 1.851770] VFS: Disk quotas dquot_6.6.0
  248. [ 1.851968] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  249. [ 1.853595] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  250. [ 1.854858] NFS: Registering the id_resolver key type
  251. [ 1.854902] Key type id_resolver registered
  252. [ 1.854920] Key type id_legacy registered
  253. [ 1.854951] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  254. [ 1.855615] fuse init (API version 7.23)
  255. [ 1.856330] JFS: nTxBlock = 8192, nTxLock = 65536
  256. [ 1.861586] SGI XFS with ACLs, security attributes, realtime, no debug enabled
  257. [ 1.863705] Key type big_key registered
  258. [ 1.863782]
  259. TEE Core Framework initialization (ver 1:0.1)
  260. [ 1.863838] TEE armv7 Driver initialization
  261. [ 1.864234] tz_tee_probe: name="armv7sec", id=0, pdev_name="armv7sec.0"
  262. [ 1.864258] TEE core: Alloc the misc device "opteearmtz00" (id=0)
  263. [ 1.864495] TEE Core: Register the misc device "opteearmtz00" (id=0,minor=62)
  264. [ 1.868491] NET: Registered protocol family 38
  265. [ 1.868537] Key type asymmetric registered
  266. [ 1.868561] Asymmetric key parser 'x509' registered
  267. [ 1.868752] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
  268. [ 1.868922] io scheduler noop registered
  269. [ 1.868948] io scheduler deadline registered (default)
  270. [ 1.868997] io scheduler cfq registered
  271. [ 1.869855] phy phy-ff770000.syscon:usb2-phy@e460.0: Looking up phy-supply from device tree
  272. [ 1.869942] vcc5v0_host: could not add device link phy-ff770000.syscon:usb2-phy@e460.0 err -2
  273. [ 1.870241] phy phy-ff770000.syscon:usb2-phy@e460.1: Looking up phy-supply from device tree
  274. [ 1.870252] phy phy-ff770000.syscon:usb2-phy@e460.1: Looking up phy-supply property in node /syscon@ff770000/usb2-phy@e460/otg-port failed
  275. [ 1.870476] phy phy-ff770000.syscon:usb2-phy@e460.1: Looking up vbus-supply from device tree
  276. [ 1.870487] phy phy-ff770000.syscon:usb2-phy@e460.1: Looking up vbus-supply property in node /syscon@ff770000/usb2-phy@e460/otg-port failed
  277. [ 1.870499] phy phy-ff770000.syscon:usb2-phy@e460.1: Failed to get VBUS supply regulator
  278. [ 1.871675] phy phy-ff770000.syscon:phy@f780.2: Looking up phy-supply from device tree
  279. [ 1.871686] phy phy-ff770000.syscon:phy@f780.2: Looking up phy-supply property in node /syscon@ff770000/phy@f780 failed
  280. [ 1.872718] phy phy-ff800000.phy.3: Looking up phy-supply from device tree
  281. [ 1.872730] phy phy-ff800000.phy.3: Looking up phy-supply property in node /phy@ff800000/dp-port failed
  282. [ 1.872833] phy phy-ff800000.phy.4: Looking up phy-supply from device tree
  283. [ 1.872843] phy phy-ff800000.phy.4: Looking up phy-supply property in node /phy@ff800000/usb3-port failed
  284. [ 1.876046] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
  285. [ 1.876088] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
  286. [ 1.877607] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
  287. [ 1.877644] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
  288. [ 1.878688] pwm-regulator vdd-log: GPIO lookup for consumer enable
  289. [ 1.878697] pwm-regulator vdd-log: using device tree for GPIO lookup
  290. [ 1.878708] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/vdd-log[0]'
  291. [ 1.878717] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/vdd-log[0]'
  292. [ 1.878724] pwm-regulator vdd-log: using lookup tables for GPIO lookup
  293. [ 1.878732] pwm-regulator vdd-log: lookup for GPIO enable failed
  294. [ 1.878755] pwm-regulator vdd-log: Looking up pwm-supply from device tree
  295. [ 1.878814] pwm-regulator: supplied by vcc_sys
  296. [ 1.878837] vcc_sys: could not add device link regulator.8 err -2
  297. [ 1.878907] vdd_log: 800 <--> 1400 mV at 896 mV
  298. [ 1.879463] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
  299. [ 1.881024] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 35, base_baud = 1500000) is a 16550A
  300. [ 1.997260] console [ttyS2] enabled
  301. [ 1.998585] [drm] Initialized drm 1.1.0 20060810
  302. [ 2.002610] [drm] Rockchip DRM driver version: v1.0.1
  303. [ 2.003553] usbcore: registered new interface driver udl
  304. [ 2.005336] Unable to detect cache hierarchy for CPU 0
  305. [ 2.006568] brd: module loaded
  306. [ 2.012111] loop: module loaded
  307. [ 2.012478] lkdtm: No crash points registered, enable through debugfs
  308. [ 2.014455] rockchip-spi ff1d0000.spi: Failed to request TX DMA channel
  309. [ 2.015059] rockchip-spi ff1d0000.spi: Failed to request RX DMA channel
  310. [ 2.015657] rockchip-spi ff1d0000.spi: no high_speed pinctrl state
  311. [ 2.016801] m25p80 spi32766.0: gd25q128 (16384 Kbytes)
  312. [ 2.017291] 3 ofpart partitions found on MTD device spi32766.0
  313. [ 2.017821] Creating 3 MTD partitions on "spi32766.0":
  314. [ 2.018290] 0x000000000000-0x0000003f8000 : "loader"
  315. [ 2.019596] 0x0000003f8000-0x000000400000 : "env"
  316. [ 2.020823] 0x0000007c0000-0x000000800000 : "vendor"
  317. [ 2.023509] force_sf_dma_mode is ignored if force_thresh_dma_mode is set.
  318. [ 2.024110] rk_gmac-dwmac fe300000.ethernet: Looking up phy-supply from device tree
  319. [ 2.024220] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
  320. [ 2.024878] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
  321. [ 2.025396] rk_gmac-dwmac fe300000.ethernet: RX delay(0x20).
  322. [ 2.025926] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
  323. [ 2.026662] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
  324. [ 2.027291] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
  325. [ 2.032849] rk_gmac-dwmac fe300000.ethernet: init for RGMII
  326. [ 2.033472] stmmac - user ID: 0x10, Synopsys ID: 0x35
  327. [ 2.033931] Ring mode enabled
  328. [ 2.034215] DMA HW capability register supported
  329. [ 2.034617] Normal descriptors
  330. [ 2.034938] RX Checksum Offload Engine supported (type 2)
  331. [ 2.035433] Wake-Up On Lan supported
  332. [ 2.035801] Enable RX Mitigation via HW Watchdog Timer
  333. [ 2.036372] of_get_named_gpiod_flags: parsed 'snps,reset-gpio' property of node '/ethernet@fe300000[0]' - status (0)
  334. [ 2.111429] libphy: stmmac: probed
  335. [ 2.111774] eth%d: PHY ID 001cc916 at 0 IRQ POLL (stmmac-0:00) active
  336. [ 2.112369] eth%d: PHY ID 001cc916 at 1 IRQ POLL (stmmac-0:01)
  337. [ 2.114894] Rockchip WiFi SYS interface (V1.00) ...
  338. [ 2.115471] usbcore: registered new interface driver cdc_ether
  339. [ 2.116058] usbcore: registered new interface driver rndis_host
  340. [ 2.118432] rockchip-dwc3 usb0: failed to get drvdata dwc3
  341. [ 2.123658] rockchip-dwc3 usb1: fail to get drvdata hcd
  342. [ 2.125697] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  343. [ 2.126318] ehci-pci: EHCI PCI platform driver
  344. [ 2.126807] ehci-platform: EHCI generic platform driver
  345. [ 2.131346] ehci-platform fe3c0000.usb: EHCI Host Controller
  346. [ 2.132069] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 1
  347. [ 2.132951] ehci-platform fe3c0000.usb: irq 29, io mem 0xfe3c0000
  348. [ 2.144487] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
  349. [ 2.145276] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  350. [ 2.145905] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  351. [ 2.146588] usb usb1: Product: EHCI Host Controller
  352. [ 2.147047] usb usb1: Manufacturer: Linux 4.4.154-1128-rockchip-ayufan-g61b4b1151f9a ehci_hcd
  353. [ 2.147843] usb usb1: SerialNumber: fe3c0000.usb
  354. [ 2.148876] hub 1-0:1.0: USB hub found
  355. [ 2.149254] hub 1-0:1.0: 1 port detected
  356. [ 2.150188] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  357. [ 2.150763] ohci-platform: OHCI generic platform driver
  358. [ 2.151763] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
  359. [ 2.152561] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 2
  360. [ 2.153356] ohci-platform fe3e0000.usb: irq 30, io mem 0xfe3e0000
  361. [ 2.212690] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  362. [ 2.213323] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  363. [ 2.214005] usb usb2: Product: Generic Platform OHCI controller
  364. [ 2.214556] usb usb2: Manufacturer: Linux 4.4.154-1128-rockchip-ayufan-g61b4b1151f9a ohci_hcd
  365. [ 2.215352] usb usb2: SerialNumber: fe3e0000.usb
  366. [ 2.216413] hub 2-0:1.0: USB hub found
  367. [ 2.216821] hub 2-0:1.0: 1 port detected
  368. [ 2.219487] usbcore: registered new interface driver iforce
  369. [ 2.220050] usbcore: registered new interface driver xpad
  370. [ 2.220847] usbcore: registered new interface driver usbtouchscreen
  371. [ 2.221639] .. rk pwm remotectl v1.1 init
  372. [ 2.222239] input: ff420030.pwm as /devices/platform/ff420030.pwm/input/input0
  373. [ 2.223634] i2c /dev entries driver
  374. [ 2.224712] fan53555-regulator 0-0040: GPIO lookup for consumer vsel
  375. [ 2.224721] fan53555-regulator 0-0040: using device tree for GPIO lookup
  376. [ 2.224750] of_get_named_gpiod_flags: parsed 'vsel-gpios' property of node '/i2c@ff3c0000/syr827@40[0]' - status (0)
  377. [ 2.225117] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
  378. [ 2.225751] fan53555-regulator 0-0040: Looking up vin-supply from device tree
  379. [ 2.225797] fan53555-reg: supplied by vcc_sys
  380. [ 2.226201] vcc_sys: could not add device link regulator.9 err -2
  381. [ 2.227541] vdd_cpu_b: 712 <--> 1500 mV at 1000 mV
  382. [ 2.228121] fan53555-regulator 0-0041: GPIO lookup for consumer vsel
  383. [ 2.228130] fan53555-regulator 0-0041: using device tree for GPIO lookup
  384. [ 2.228159] of_get_named_gpiod_flags: parsed 'vsel-gpios' property of node '/i2c@ff3c0000/syr828@41[0]' - status (0)
  385. [ 2.228510] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
  386. [ 2.229141] fan53555-regulator 0-0041: Looking up vin-supply from device tree
  387. [ 2.229179] fan53555-reg: supplied by vcc_sys
  388. [ 2.229581] vcc_sys: could not add device link regulator.10 err -2
  389. [ 2.231157] vdd_gpu: 712 <--> 1500 mV at 1000 mV
  390. [ 2.232048] rk808 0-001b: Pmic Chip id: 0x0
  391. [ 2.235415] rk808 0-001b: GPIO lookup for consumer dvs
  392. [ 2.235424] rk808 0-001b: using device tree for GPIO lookup
  393. [ 2.235434] of_get_named_gpiod_flags: can't parse 'dvs-gpios' property of node '/i2c@ff3c0000/pmic@1b[0]'
  394. [ 2.235443] of_get_named_gpiod_flags: can't parse 'dvs-gpio' property of node '/i2c@ff3c0000/pmic@1b[0]'
  395. [ 2.235451] rk808 0-001b: using lookup tables for GPIO lookup
  396. [ 2.235459] rk808 0-001b: lookup for GPIO dvs failed
  397. [ 2.235467] rk808-regulator rk808-regulator: there is no dvs0 gpio
  398. [ 2.236029] rk808 0-001b: GPIO lookup for consumer dvs
  399. [ 2.236036] rk808 0-001b: using device tree for GPIO lookup
  400. [ 2.236045] of_get_named_gpiod_flags: can't parse 'dvs-gpios' property of node '/i2c@ff3c0000/pmic@1b[1]'
  401. [ 2.236053] of_get_named_gpiod_flags: can't parse 'dvs-gpio' property of node '/i2c@ff3c0000/pmic@1b[1]'
  402. [ 2.236060] rk808 0-001b: using lookup tables for GPIO lookup
  403. [ 2.236067] rk808 0-001b: lookup for GPIO dvs failed
  404. [ 2.236075] rk808-regulator rk808-regulator: there is no dvs1 gpio
  405. [ 2.236688] rk808 0-001b: Looking up vcc1-supply from device tree
  406. [ 2.236734] DCDC_REG1: supplied by vcc_sys
  407. [ 2.237117] vcc_sys: could not add device link regulator.11 err -2
  408. [ 2.237568] vdd_center: 900 mV
  409. [ 2.237814] rk808 0-001b: Looking up vcc2-supply from device tree
  410. [ 2.237851] DCDC_REG2: supplied by vcc_sys
  411. [ 2.238232] vcc_sys: could not add device link regulator.12 err -2
  412. [ 2.238524] vdd_cpu_l: 750 <--> 1350 mV at 900 mV
  413. [ 2.238767] rk808 0-001b: Looking up vcc3-supply from device tree
  414. [ 2.238804] DCDC_REG3: supplied by vcc_sys
  415. [ 2.239185] vcc_sys: could not add device link regulator.13 err -2
  416. [ 2.239216] vcc_ddr: at 5000 mV
  417. [ 2.239434] rk808 0-001b: Looking up vcc4-supply from device tree
  418. [ 2.239469] DCDC_REG4: supplied by vcc_sys
  419. [ 2.239849] vcc_sys: could not add device link regulator.14 err -2
  420. [ 2.240024] vcc_1v8: 1800 mV
  421. [ 2.240267] rk808 0-001b: Looking up vcc6-supply from device tree
  422. [ 2.240302] LDO_REG1: supplied by vcc_sys
  423. [ 2.240693] vcc_sys: could not add device link regulator.15 err -2
  424. [ 2.241527] vcc1v8_dvp: 1800 mV
  425. [ 2.241773] rk808 0-001b: Looking up vcc6-supply from device tree
  426. [ 2.241808] LDO_REG2: supplied by vcc_sys
  427. [ 2.242180] vcc_sys: could not add device link regulator.16 err -2
  428. [ 2.242874] vcc3v0_touch: 3000 mV
  429. [ 2.243110] rk808 0-001b: Looking up vcc7-supply from device tree
  430. [ 2.243145] LDO_REG3: supplied by vcc_sys
  431. [ 2.243517] vcc_sys: could not add device link regulator.17 err -2
  432. [ 2.244223] vcc1v8_pmu: 1800 mV
  433. [ 2.244475] rk808 0-001b: Looking up vcc9-supply from device tree
  434. [ 2.244510] LDO_REG4: supplied by vcc_sys
  435. [ 2.244882] vcc_sys: could not add device link regulator.18 err -2
  436. [ 2.245588] vcc_sd: 1800 <--> 3300 mV at 3300 mV
  437. [ 2.245826] rk808 0-001b: Looking up vcc9-supply from device tree
  438. [ 2.245862] LDO_REG5: supplied by vcc_sys
  439. [ 2.246235] vcc_sys: could not add device link regulator.19 err -2
  440. [ 2.246922] vcca3v0_codec: 3000 mV
  441. [ 2.247174] rk808 0-001b: Looking up vcc10-supply from device tree
  442. [ 2.247209] LDO_REG6: supplied by vcc_sys
  443. [ 2.247582] vcc_sys: could not add device link regulator.20 err -2
  444. [ 2.248268] vcc_1v5: 1500 mV
  445. [ 2.248633] rk808 0-001b: Looking up vcc7-supply from device tree
  446. [ 2.248672] LDO_REG7: supplied by vcc_sys
  447. [ 2.249045] vcc_sys: could not add device link regulator.21 err -2
  448. [ 2.249740] vcca1v8_codec: 1800 mV
  449. [ 2.250006] rk808 0-001b: Looking up vcc11-supply from device tree
  450. [ 2.250042] LDO_REG8: supplied by vcc_sys
  451. [ 2.250415] vcc_sys: could not add device link regulator.22 err -2
  452. [ 2.251106] vcc_3v0: 3000 mV
  453. [ 2.251359] rk808 0-001b: Looking up vcc8-supply from device tree
  454. [ 2.251395] SWITCH_REG1: supplied by vcc3v3_sys
  455. [ 2.251813] vcc3v3_sys: could not add device link regulator.23 err -2
  456. [ 2.251844] vcc3v3_s3: at 3300 mV
  457. [ 2.252076] rk808 0-001b: Looking up vcc12-supply from device tree
  458. [ 2.252111] SWITCH_REG2: supplied by vcc3v3_sys
  459. [ 2.252547] vcc3v3_sys: could not add device link regulator.24 err -2
  460. [ 2.252697] vcc3v3_s0: at 3300 mV
  461. [ 2.255970] rk808-rtc rk808-rtc: rtc core: registered rk808-rtc as rtc0
  462. [ 2.257010] rk3x-i2c ff3c0000.i2c: Initialized RK3xxx I2C bus at ffffff80094da000
  463. [ 2.258280] rk3x-i2c ff110000.i2c: Initialized RK3xxx I2C bus at ffffff80094dc000
  464. [ 2.259678] fusb302 4-0022: GPIO lookup for consumer int-n
  465. [ 2.259688] fusb302 4-0022: using device tree for GPIO lookup
  466. [ 2.259717] of_get_named_gpiod_flags: parsed 'int-n-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]' - status (0)
  467. [ 2.259743] fusb302 4-0022: GPIO lookup for consumer vbus-5v
  468. [ 2.259750] fusb302 4-0022: using device tree for GPIO lookup
  469. [ 2.259775] of_get_named_gpiod_flags: parsed 'vbus-5v-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]' - status (0)
  470. [ 2.259799] fusb302 4-0022: GPIO lookup for consumer vbus-other
  471. [ 2.259806] fusb302 4-0022: using device tree for GPIO lookup
  472. [ 2.259815] of_get_named_gpiod_flags: can't parse 'vbus-other-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]'
  473. [ 2.259824] of_get_named_gpiod_flags: can't parse 'vbus-other-gpio' property of node '/i2c@ff3d0000/fusb30x@22[0]'
  474. [ 2.259831] fusb302 4-0022: using lookup tables for GPIO lookup
  475. [ 2.259838] fusb302 4-0022: lookup for GPIO vbus-other failed
  476. [ 2.259846] fusb302 4-0022: GPIO lookup for consumer discharge
  477. [ 2.259853] fusb302 4-0022: using device tree for GPIO lookup
  478. [ 2.259860] of_get_named_gpiod_flags: can't parse 'discharge-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]'
  479. [ 2.259868] of_get_named_gpiod_flags: can't parse 'discharge-gpio' property of node '/i2c@ff3d0000/fusb30x@22[0]'
  480. [ 2.259875] fusb302 4-0022: using lookup tables for GPIO lookup
  481. [ 2.259882] fusb302 4-0022: lookup for GPIO discharge failed
  482. [ 2.260045] fusb302 4-0022: Can't get property of role, set role to default DRP
  483. [ 2.268975] fusb302 4-0022: port 0 probe success with role ROLE_MODE_DRP, try_role ROLE_MODE_NONE
  484. [ 2.269801] rk3x-i2c ff3d0000.i2c: Initialized RK3xxx I2C bus at ffffff80094de000
  485. [ 2.271519] IR NEC protocol handler initialized
  486. [ 2.271941] IR RC5(x/sz) protocol handler initialized
  487. [ 2.272406] IR RC6 protocol handler initialized
  488. [ 2.272883] IR JVC protocol handler initialized
  489. [ 2.273305] IR Sony protocol handler initialized
  490. [ 2.273733] IR SANYO protocol handler initialized
  491. [ 2.274168] IR Sharp protocol handler initialized
  492. [ 2.274602] IR MCE Keyboard/mouse protocol handler initialized
  493. [ 2.275136] IR XMP protocol handler initialized
  494. [ 2.276151] usbcore: registered new interface driver uvcvideo
  495. [ 2.276684] USB Video Class driver (1.1.1)
  496. [ 2.277548] rockchip-iodomain ff320000.syscon:io-domains: Looking up pmu1830-supply from device tree
  497. [ 2.277734] rockchip-iodomain ff770000.syscon:io-domains: Looking up bt656-supply from device tree
  498. [ 2.277830] rockchip-iodomain ff770000.syscon:io-domains: Looking up audio-supply from device tree
  499. [ 2.277899] rockchip-iodomain ff770000.syscon:io-domains: Looking up sdmmc-supply from device tree
  500. [ 2.277962] rockchip-iodomain ff770000.syscon:io-domains: Looking up gpio1830-supply from device tree
  501. [ 2.280002] rk_tsadcv2_temp_to_code: Invalid conversion table: code=1023, temperature=2147483647
  502. [ 2.280985] rockchip-thermal ff260000.tsadc: tsadc is probed successfully!
  503. [ 2.282573] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
  504. [ 2.283348] Bluetooth: Virtual HCI driver ver 1.5
  505. [ 2.283876] Bluetooth: HCI UART driver ver 2.3
  506. [ 2.284284] Bluetooth: HCI UART protocol H4 registered
  507. [ 2.284784] Bluetooth: HCI UART protocol LL registered
  508. [ 2.285252] Bluetooth: HCI UART protocol ATH3K registered
  509. [ 2.285810] usbcore: registered new interface driver bfusb
  510. [ 2.286359] usbcore: registered new interface driver btusb
  511. [ 2.287246] cpu cpu0: Failed to get leakage
  512. [ 2.287651] cpu cpu0: Looking up cpu-supply from device tree
  513. [ 2.287709] cpu cpu0: Failed to get pvtm
  514. [ 2.288318] cpu cpu4: Failed to get leakage
  515. [ 2.288763] cpu cpu4: Looking up cpu-supply from device tree
  516. [ 2.288814] cpu cpu4: Failed to get pvtm
  517. [ 2.289390] cpu cpu0: Looking up cpu-supply from device tree
  518. [ 2.289660] cpu cpu0: Looking up cpu-supply from device tree
  519. [ 2.290816] cpu cpu4: Looking up cpu-supply from device tree
  520. [ 2.293387] sdhci: Secure Digital Host Controller Interface driver
  521. [ 2.293952] sdhci: Copyright(c) Pierre Ossman
  522. [ 2.294354] Synopsys Designware Multimedia Card Interface Driver
  523. [ 2.295749] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
  524. [ 2.296433] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
  525. [ 2.297096] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
  526. [ 2.297678] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
  527. [ 2.298579] dwmmc_rockchip fe320000.dwmmc: 'clock-freq-min-max' property was deprecated.
  528. [ 2.299319] dwmmc_rockchip fe320000.dwmmc: Looking up vmmc-supply from device tree
  529. [ 2.299329] dwmmc_rockchip fe320000.dwmmc: Looking up vmmc-supply property in node /dwmmc@fe320000 failed
  530. [ 2.299356] dwmmc_rockchip fe320000.dwmmc: Looking up vqmmc-supply from device tree
  531. [ 2.299421] dwmmc_rockchip fe320000.dwmmc: No vmmc regulator found
  532. [ 2.299995] dwmmc_rockchip fe320000.dwmmc: GPIO lookup for consumer cd
  533. [ 2.300002] dwmmc_rockchip fe320000.dwmmc: using device tree for GPIO lookup
  534. [ 2.300013] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/dwmmc@fe320000[0]'
  535. [ 2.300022] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/dwmmc@fe320000[0]'
  536. [ 2.300030] dwmmc_rockchip fe320000.dwmmc: using lookup tables for GPIO lookup
  537. [ 2.300038] dwmmc_rockchip fe320000.dwmmc: lookup for GPIO cd failed
  538. [ 2.300047] dwmmc_rockchip fe320000.dwmmc: GPIO lookup for consumer wp
  539. [ 2.300054] dwmmc_rockchip fe320000.dwmmc: using device tree for GPIO lookup
  540. [ 2.300062] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@fe320000[0]'
  541. [ 2.300070] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@fe320000[0]'
  542. [ 2.300077] dwmmc_rockchip fe320000.dwmmc: using lookup tables for GPIO lookup
  543. [ 2.300084] dwmmc_rockchip fe320000.dwmmc: lookup for GPIO wp failed
  544. [ 2.300232] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done
  545. [ 2.300975] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done
  546. [ 2.316624] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  547. [ 2.333524] dwmmc_rockchip fe320000.dwmmc: 1 slots initialized
  548. [ 2.336358] sdhci-pltfm: SDHCI platform and OF driver helper
  549. [ 2.337363] sdhci-arasan fe330000.sdhci: GPIO lookup for consumer wp
  550. [ 2.337371] sdhci-arasan fe330000.sdhci: using device tree for GPIO lookup
  551. [ 2.337381] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/sdhci@fe330000[0]'
  552. [ 2.337389] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/sdhci@fe330000[0]'
  553. [ 2.337397] sdhci-arasan fe330000.sdhci: using lookup tables for GPIO lookup
  554. [ 2.337404] sdhci-arasan fe330000.sdhci: lookup for GPIO wp failed
  555. [ 2.339504] sdhci-arasan fe330000.sdhci: Looking up vmmc-supply from device tree
  556. [ 2.339515] sdhci-arasan fe330000.sdhci: Looking up vmmc-supply property in node /sdhci@fe330000 failed
  557. [ 2.339541] sdhci-arasan fe330000.sdhci: Looking up vqmmc-supply from device tree
  558. [ 2.339550] sdhci-arasan fe330000.sdhci: Looking up vqmmc-supply property in node /sdhci@fe330000 failed
  559. [ 2.339568] sdhci-arasan fe330000.sdhci: No vmmc regulator found
  560. [ 2.340120] sdhci-arasan fe330000.sdhci: No vqmmc regulator found
  561. [ 2.362943] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done
  562. [ 2.363918] vcc_sd: ramp_delay not set
  563. [ 2.363932] rockchip-iodomain ff770000.syscon:io-domains: Setting to 1800000 done
  564. [ 2.376607] mmc1: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
  565. [ 2.378282] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/work-led[0]' - status (0)
  566. [ 2.378480] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/diy-led[0]' - status (0)
  567. [ 2.380622] hidraw: raw HID events driver (C) Jiri Kosina
  568. [ 2.384432] usbcore: registered new interface driver usbhid
  569. [ 2.384965] usbhid: USB HID core driver
  570. [ 2.389094] usbcore: registered new interface driver snd-usb-audio
  571. [ 2.391091] of_get_named_gpiod_flags: can't parse 'spk-con-gpio' property of node '/i2c@ff110000/es8316@10[0]'
  572. [ 2.391112] es8316 1-0010: Can not read property spk_ctl_gpio
  573. [ 2.391718] of_get_named_gpiod_flags: parsed 'hp-det-gpio' property of node '/i2c@ff110000/es8316@10[0]' - status (0)
  574. [ 2.398462] mmc_host mmc0: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
  575. [ 2.404024] u32 classifier
  576. [ 2.404330] Netfilter messages via NETLINK v0.30.
  577. [ 2.404906] ip_set: protocol 6
  578. [ 2.405462] Initializing XFRM netlink socket
  579. [ 2.406610] NET: Registered protocol family 10
  580. [ 2.408232] NET: Registered protocol family 17
  581. [ 2.408717] NET: Registered protocol family 15
  582. [ 2.409187] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
  583. [ 2.410374] Bridge firewalling registered
  584. [ 2.411184] Bluetooth: RFCOMM socket layer initialized
  585. [ 2.411710] Bluetooth: RFCOMM ver 1.11
  586. [ 2.412110] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  587. [ 2.412711] Bluetooth: HIDP socket layer initialized
  588. [ 2.413248] 8021q: 802.1Q VLAN Support v1.8
  589. [ 2.413689] [WLAN_RFKILL]: Enter rfkill_wlan_init
  590. [ 2.414444] [WLAN_RFKILL]: Enter rfkill_wlan_probe
  591. [ 2.414951] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6354
  592. [ 2.415577] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
  593. [ 2.416219] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
  594. [ 2.416911] of_get_named_gpiod_flags: can't parse 'WIFI,poweren_gpio' property of node '/wireless-wlan[0]'
  595. [ 2.416919] of_get_named_gpiod_flags: can't parse 'WIFI,vbat_gpio' property of node '/wireless-wlan[0]'
  596. [ 2.416926] of_get_named_gpiod_flags: can't parse 'WIFI,reset_gpio' property of node '/wireless-wlan[0]'
  597. [ 2.416962] of_get_named_gpiod_flags: parsed 'WIFI,host_wake_irq' property of node '/wireless-wlan[0]' - status (0)
  598. [ 2.416969] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 3, flags = 0.
  599. [ 2.417817] [WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not found !
  600. [ 2.418512] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
  601. [ 2.418994] [WLAN_RFKILL]: Exit rfkill_wlan_probe
  602. [ 2.419503] [BT_RFKILL]: Enter rfkill_rk_init
  603. [ 2.420314] of_get_named_gpiod_flags: parsed 'uart_rts_gpios' property of node '/wireless-bluetooth[0]' - status (0)
  604. [ 2.420323] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 83.
  605. [ 2.421121] of_get_named_gpiod_flags: can't parse 'BT,power_gpio' property of node '/wireless-bluetooth[0]'
  606. [ 2.421147] of_get_named_gpiod_flags: parsed 'BT,reset_gpio' property of node '/wireless-bluetooth[0]' - status (0)
  607. [ 2.421154] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 9.
  608. [ 2.421897] of_get_named_gpiod_flags: parsed 'BT,wake_gpio' property of node '/wireless-bluetooth[0]' - status (0)
  609. [ 2.421904] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 91.
  610. [ 2.422641] of_get_named_gpiod_flags: parsed 'BT,wake_host_irq' property of node '/wireless-bluetooth[0]' - status (0)
  611. [ 2.422647] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 4.
  612. [ 2.424211] [BT_RFKILL]: Request irq for bt wakeup host
  613. [ 2.424786] [BT_RFKILL]: ** disable irq
  614. [ 2.425314] [BT_RFKILL]: bt_default device registered.
  615. [ 2.425882] Key type dns_resolver registered
  616. [ 2.426699] Registered cp15_barrier emulation handler
  617. [ 2.427235] Registered setend emulation handler
  618. [ 2.428610] registered taskstats version 1
  619. [ 2.431419] Btrfs loaded, integrity-checker=on
  620. [ 2.431948] BTRFS: selftest: Running btrfs free space cache tests
  621. [ 2.432565] BTRFS: selftest: Running extent only tests
  622. [ 2.433061] BTRFS: selftest: Running bitmap only tests
  623. [ 2.433560] BTRFS: selftest: Running bitmap and extent tests
  624. [ 2.434112] BTRFS: selftest: Running space stealing from bitmap to extent
  625. [ 2.436012] BTRFS: selftest: Free space cache tests finished
  626. [ 2.436552] BTRFS: selftest: Running extent buffer operation tests
  627. [ 2.437088] BTRFS: selftest: Running btrfs_split_item tests
  628. [ 2.437686] BTRFS: selftest: Running find delalloc tests
  629. [ 2.694989] BTRFS: selftest: Running btrfs_get_extent tests
  630. [ 2.695646] BTRFS: selftest: Running hole first btrfs_get_extent test
  631. [ 2.696236] BTRFS: selftest: Running outstanding_extents tests
  632. [ 2.696802] BTRFS: selftest: Running qgroup tests
  633. [ 2.697225] BTRFS: selftest: Qgroup basic add
  634. [ 2.697652] BTRFS: selftest: Qgroup multiple refs test
  635. [ 2.704696] usb 2-1: new low-speed USB device number 2 using ohci-platform
  636. [ 2.705532] dwmmc_rockchip fe320000.dwmmc: Successfully tuned phase to 223
  637. [ 2.706166] mmc0: new ultra high speed SDR104 SDHC card at address 59b4
  638. [ 2.707526] mmcblk0: mmc0:59b4 SD 7.23 GiB
  639. [ 2.714971] mmcblk0: p1 p2 p3 p4 p5 p6 p7
  640. [ 2.740671] Key type encrypted registered
  641. [ 2.743111] phy phy-ff770000.syscon:usb2-phy@e450.5: Looking up phy-supply from device tree
  642. [ 2.743245] vcc5v0_host: could not add device link phy-ff770000.syscon:usb2-phy@e450.5 err -2
  643. [ 2.743980] phy phy-ff770000.syscon:usb2-phy@e450.6: Looking up phy-supply from device tree
  644. [ 2.744005] phy phy-ff770000.syscon:usb2-phy@e450.6: Looking up phy-supply property in node /syscon@ff770000/usb2-phy@e450/otg-port failed
  645. [ 2.744548] phy phy-ff770000.syscon:usb2-phy@e450.6: Looking up vbus-supply from device tree
  646. [ 2.744572] phy phy-ff770000.syscon:usb2-phy@e450.6: Looking up vbus-supply property in node /syscon@ff770000/usb2-phy@e450/otg-port failed
  647. [ 2.744612] phy phy-ff770000.syscon:usb2-phy@e450.6: Failed to get VBUS supply regulator
  648. [ 2.747071] phy phy-ff7c0000.phy.7: Looking up phy-supply from device tree
  649. [ 2.747097] phy phy-ff7c0000.phy.7: Looking up phy-supply property in node /phy@ff7c0000/dp-port failed
  650. [ 2.747330] phy phy-ff7c0000.phy.8: Looking up phy-supply from device tree
  651. [ 2.747352] phy phy-ff7c0000.phy.8: Looking up phy-supply property in node /phy@ff7c0000/usb3-port failed
  652. [ 2.749349] rockchip-drm display-subsystem: devfreq is not set
  653. [ 2.750456] rockchip-vop ff900000.vop: missing rockchip,grf property
  654. [ 2.751565] rockchip-drm display-subsystem: bound ff900000.vop (ops 0xffffff8008d31f38)
  655. [ 2.752396] rockchip-vop ff8f0000.vop: missing rockchip,grf property
  656. [ 2.753519] rockchip-drm display-subsystem: bound ff8f0000.vop (ops 0xffffff8008d31f38)
  657. [ 2.754960] i2c i2c-9: of_i2c: modalias failure on /hdmi@ff940000/ports
  658. [ 2.755579] dwhdmi-rockchip ff940000.hdmi: registered DesignWare HDMI I2C bus driver
  659. [ 2.756400] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
  660. [ 2.758544] rockchip-drm display-subsystem: bound ff940000.hdmi (ops 0xffffff8008d27f40)
  661. [ 2.759835] i2c i2c-10: of_i2c: modalias failure on /dp@fec00000/ports
  662. [ 2.760797] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2
  663. [ 2.761611] rockchip-drm display-subsystem: bound fec00000.dp (ops 0xffffff8008d28f18)
  664. [ 2.762334] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  665. [ 2.762930] [drm] No driver support for vblank timestamp query.
  666. [ 2.763636] rockchip-drm display-subsystem: failed to parse loader memory
  667. [ 2.920629] usb 2-1: New USB device found, idVendor=2516, idProduct=0042
  668. [ 2.921258] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  669. [ 2.921917] usb 2-1: Product: MasterKeys Lite L Combo Keyboard(KB)
  670. [ 2.922485] usb 2-1: Manufacturer: Cooler Master Technology Inc.
  671. [ 2.931347] input: Cooler Master Technology Inc. MasterKeys Lite L Combo Keyboard(KB) as /devices/platform/fe3e0000.usb/usb2/2-1/2-1:1.0/0003:2516:0042.0001/input/input1
  672. [ 2.931525] rockchip-vop ff900000.vop: [drm:vop_crtc_enable] Update mode to 1920x1080p60, type: 11
  673. [ 2.985974] hid-generic 0003:2516:0042.0001: input,hidraw0: USB HID v1.10 Keyboard [Cooler Master Technology Inc. MasterKeys Lite L Combo Keyboard(KB)] on usb-fe3e0000.usb-1/input0
  674. [ 2.996041] input: Cooler Master Technology Inc. MasterKeys Lite L Combo Keyboard(KB) as /devices/platform/fe3e0000.usb/usb2/2-1/2-1:1.1/0003:2516:0042.0002/input/input2
  675. [ 3.045439] Console: switching to colour frame buffer device 240x67
  676. [ 3.049836] hid-generic 0003:2516:0042.0002: input,hiddev0,hidraw1: USB HID v1.10 Keyboard [Cooler Master Technology Inc. MasterKeys Lite L Combo Keyboard(KB)] on usb-fe3e0000.usb-1/input1
  677. [ 3.107266] rockchip-drm display-subsystem: fb0: frame buffer device
  678. [ 3.122491] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
  679. [ 3.123505] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 3
  680. [ 3.124428] xhci-hcd xhci-hcd.5.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x02030010
  681. [ 3.125409] xhci-hcd xhci-hcd.5.auto: irq 223, io mem 0xfe800000
  682. [ 3.126170] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
  683. [ 3.126878] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  684. [ 3.127632] usb usb3: Product: xHCI Host Controller
  685. [ 3.128143] usb usb3: Manufacturer: Linux 4.4.154-1128-rockchip-ayufan-g61b4b1151f9a xhci-hcd
  686. [ 3.129074] usb usb3: SerialNumber: xhci-hcd.5.auto
  687. [ 3.130199] hub 3-0:1.0: USB hub found
  688. [ 3.130617] hub 3-0:1.0: 1 port detected
  689. [ 3.131270] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
  690. [ 3.132148] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 4
  691. [ 3.133007] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
  692. [ 3.133925] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
  693. [ 3.134634] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  694. [ 3.135385] usb usb4: Product: xHCI Host Controller
  695. [ 3.135895] usb usb4: Manufacturer: Linux 4.4.154-1128-rockchip-ayufan-g61b4b1151f9a xhci-hcd
  696. [ 3.136821] usb usb4: SerialNumber: xhci-hcd.5.auto
  697. [ 3.137941] hub 4-0:1.0: USB hub found
  698. [ 3.138356] hub 4-0:1.0: 1 port detected
  699. [ 3.139926] xhci-hcd xhci-hcd.5.auto: remove, state 1
  700. [ 3.140500] usb usb4: USB disconnect, device number 1
  701. [ 3.160337] xhci-hcd xhci-hcd.5.auto: Host not halted after 16000 microseconds.
  702. [ 3.161101] xhci-hcd xhci-hcd.5.auto: Host controller not halted, aborting reset.
  703. [ 3.161906] xhci-hcd xhci-hcd.5.auto: USB bus 4 deregistered
  704. [ 3.162924] xhci-hcd xhci-hcd.5.auto: remove, state 1
  705. [ 3.163464] usb usb3: USB disconnect, device number 1
  706. [ 3.164616] xhci-hcd xhci-hcd.5.auto: USB bus 3 deregistered
  707. [ 3.169720] xhci-hcd xhci-hcd.6.auto: xHCI Host Controller
  708. [ 3.170695] xhci-hcd xhci-hcd.6.auto: new USB bus registered, assigned bus number 3
  709. [ 3.171613] xhci-hcd xhci-hcd.6.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x02030010
  710. [ 3.172586] xhci-hcd xhci-hcd.6.auto: irq 224, io mem 0xfe900000
  711. [ 3.173344] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
  712. [ 3.174053] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  713. [ 3.174804] usb usb3: Product: xHCI Host Controller
  714. [ 3.181773] usb usb3: Manufacturer: Linux 4.4.154-1128-rockchip-ayufan-g61b4b1151f9a xhci-hcd
  715. [ 3.189094] usb usb3: SerialNumber: xhci-hcd.6.auto
  716. [ 3.197407] hub 3-0:1.0: USB hub found
  717. [ 3.208593] hub 3-0:1.0: 1 port detected
  718. [ 3.219532] xhci-hcd xhci-hcd.6.auto: xHCI Host Controller
  719. [ 3.225449] xhci-hcd xhci-hcd.6.auto: new USB bus registered, assigned bus number 4
  720. [ 3.232726] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
  721. [ 3.238563] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
  722. [ 3.244136] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  723. [ 3.249710] usb usb4: Product: xHCI Host Controller
  724. [ 3.255036] usb usb4: Manufacturer: Linux 4.4.154-1128-rockchip-ayufan-g61b4b1151f9a xhci-hcd
  725. [ 3.260736] usb usb4: SerialNumber: xhci-hcd.6.auto
  726. [ 3.265875] hub 4-0:1.0: USB hub found
  727. [ 3.270176] hub 4-0:1.0: 1 port detected
  728. [ 3.278598] ehci-platform fe380000.usb: EHCI Host Controller
  729. [ 3.283297] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 5
  730. [ 3.287970] ehci-platform fe380000.usb: irq 27, io mem 0xfe380000
  731. [ 3.300590] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
  732. [ 3.305146] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
  733. [ 3.309584] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  734. [ 3.314041] usb usb5: Product: EHCI Host Controller
  735. [ 3.318305] usb usb5: Manufacturer: Linux 4.4.154-1128-rockchip-ayufan-g61b4b1151f9a ehci_hcd
  736. [ 3.322916] usb usb5: SerialNumber: fe380000.usb
  737. [ 3.327211] hub 5-0:1.0: USB hub found
  738. [ 3.330706] hub 5-0:1.0: 1 port detected
  739. [ 3.334678] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
  740. [ 3.338507] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 6
  741. [ 3.342235] ohci-platform fe3a0000.usb: irq 28, io mem 0xfe3a0000
  742. [ 3.404929] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
  743. [ 3.417805] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  744. [ 3.430314] usb usb6: Product: Generic Platform OHCI controller
  745. [ 3.442632] usb usb6: Manufacturer: Linux 4.4.154-1128-rockchip-ayufan-g61b4b1151f9a ohci_hcd
  746. [ 3.455376] usb usb6: SerialNumber: fe3a0000.usb
  747. [ 3.469440] hub 6-0:1.0: USB hub found
  748. [ 3.476938] hub 6-0:1.0: 1 port detected
  749. [ 3.485373] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/es8316-sound[0]'
  750. [ 3.485384] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/es8316-sound[0]'
  751. [ 3.576788] usb 3-1: new high-speed USB device number 2 using xhci-hcd
  752. [ 3.592053] asoc-simple-card es8316-sound: ES8316 HiFi <-> ff890000.i2s mapping ok
  753. [ 3.592093] asoc-simple-card es8316-sound: ASoC: no source widget found for MICBIAS1
  754. [ 3.592107] asoc-simple-card es8316-sound: ASoC: Failed to add route MICBIAS1 -> direct -> Mic Jack
  755. [ 3.592123] asoc-simple-card es8316-sound: ASoC: no sink widget found for IN1P
  756. [ 3.592136] asoc-simple-card es8316-sound: ASoC: Failed to add route Mic Jack -> direct -> IN1P
  757. [ 3.592897] es8316 1-0010: ASoC: Failed to create Left Hp mixer debugfs file
  758. [ 3.592916] es8316 1-0010: ASoC: Failed to create Right Hp mixer debugfs file
  759. [ 3.592992] es8316 1-0010: ASoC: Failed to create HPCP L debugfs file
  760. [ 3.593046] es8316 1-0010: ASoC: Failed to create HPCP R debugfs file
  761. [ 3.593121] es8316 1-0010: ASoC: Failed to create HPVOL L debugfs file
  762. [ 3.593173] es8316 1-0010: ASoC: Failed to create HPVOL R debugfs file
  763. [ 3.764806] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2
  764. [ 3.812834] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/spdif-sound[0]'
  765. [ 3.812849] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/spdif-sound[0]'
  766. [ 3.813162] rockchip-spdif ff870000.spdif: Missing dma channel for stream: 0
  767. [ 3.820648] rockchip-spdif ff870000.spdif: ASoC: pcm constructor failed: -22
  768. [ 3.828042] asoc-simple-card spdif-sound: ASoC: can't create pcm ff870000.spdif-dit-hifi :-22
  769. [ 3.835721] asoc-simple-card spdif-sound: ASoC: failed to instantiate card -22
  770. [ 3.843504] asoc-simple-card: probe of spdif-sound failed with error -22
  771. [ 3.853638] rk808-rtc rk808-rtc: setting system clock to 2019-01-12 18:26:37 UTC (1547317597)
  772. [ 3.860359] of_cfs_init
  773. [ 3.866432] of_cfs_init: OK
  774. [ 3.891261] vcc3v3_pcie: disabling
  775. [ 3.897135] rk-keypad rockchip-key: no io-channels defined
  776. [ 3.902695] of_get_named_gpiod_flags: parsed 'gpios' property of node '/rockchip-key/power-key[0]' - status (0)
  777. [ 3.902716] of_get_named_gpiod_flags: parsed 'gpios' property of node '/rockchip-key/power-key[0]' - status (0)
  778. [ 3.902872] input: rk29-keypad as /devices/platform/rockchip-key/input/input3
  779. [ 3.910830] ALSA device list:
  780. [ 3.916195] #0: rockchip,es8316-codec
  781. [ 3.921771] ttyS2 - failed to request DMA, use interrupt mode
  782. [ 3.927675] Freeing unused kernel memory: 1216K
  783. [ 3.939552] usb 3-1: New USB device found, idVendor=2109, idProduct=2813
  784. [ 3.945168] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  785. [ 3.950834] usb 3-1: Product: USB2.0 Hub
  786. [ 3.956244] usb 3-1: Manufacturer: VIA Labs, Inc.
  787. [ 3.969129] hub 3-1:1.0: USB hub found
  788. [ 3.974578] hub 3-1:1.0: 4 ports detected
  789. [ 4.094040] usb 4-1: new SuperSpeed USB device number 2 using xhci-hcd
  790. [ 4.209543] usb 4-1: New USB device found, idVendor=2109, idProduct=0813
  791. [ 4.217200] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  792. [ 4.224914] usb 4-1: Product: USB3.0 Hub
  793. [ 4.232203] usb 4-1: Manufacturer: VIA Labs, Inc.
  794. [ 4.240321] mali ff9a0000.gpu: Looking up mali-supply from device tree
  795. [ 4.240472] mali ff9a0000.gpu: Failed to get leakage
  796. [ 4.240879] rk-hdmi-dp-sound hdmi-dp-sound: control 3:0:0:ELD:0 is already present
  797. [ 4.240887] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: Failed to add ELD: -16
  798. [ 4.241437] rk-hdmi-dp-sound hdmi-dp-sound: multicodec <-> ff8a0000.i2s mapping ok
  799. [ 4.241499] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: Failed to create Playback debugfs file
  800. [ 4.252904] mali ff9a0000.gpu: Looking up mali-supply from device tree
  801. [ 4.252932] vdd_gpu: could not add device link ff9a0000.gpu err -17
  802. [ 4.252940] vdd_gpu: Failed to create debugfs directory
  803. [ 4.252949] mali ff9a0000.gpu: Failed to get pvtm
  804. [ 4.256802] mali ff9a0000.gpu: GPU identified as 0x0860 r2p0 status 0
  805. [ 4.257877] hub 4-1:1.0: USB hub found
  806. [ 4.258366] hub 4-1:1.0: 4 ports detected
  807. [ 4.264098] mali ff9a0000.gpu: Protected mode not available
  808. [ 4.268339] mali ff9a0000.gpu: Using configured power model mali-simple-power-model, and fallback mali-simple-power-model
  809. [ 4.271384] I : [File] : drivers/gpu/arm/midgard/backend/gpu/mali_kbase_devfreq.c; [Line] : 414; [Func] : kbase_devfreq_init(); success initing power_model_simple.
  810. [ 4.275320] mali ff9a0000.gpu: Probed as mali0
  811. [ 4.277929] phy phy-pcie-phy.9: Looking up phy-supply from device tree
  812. [ 4.277936] phy phy-pcie-phy.9: Looking up phy-supply property in node /pcie-phy failed
  813. [ 4.278679] rockchip-pcie f8000000.pcie: GPIO lookup for consumer ep
  814. [ 4.278693] rockchip-pcie f8000000.pcie: using device tree for GPIO lookup
  815. [ 4.278742] of_get_named_gpiod_flags: parsed 'ep-gpios' property of node '/pcie@f8000000[0]' - status (0)
  816. [ 4.279013] rockchip-pcie f8000000.pcie: Looking up vpcie3v3-supply from device tree
  817. [ 4.279158] rockchip-pcie f8000000.pcie: Looking up vpcie1v8-supply from device tree
  818. [ 4.279169] rockchip-pcie f8000000.pcie: Looking up vpcie1v8-supply property in node /pcie@f8000000 failed
  819. [ 4.279200] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found
  820. [ 4.286139] rockchip-pcie f8000000.pcie: Looking up vpcie0v9-supply from device tree
  821. [ 4.286162] rockchip-pcie f8000000.pcie: Looking up vpcie0v9-supply property in node /pcie@f8000000 failed
  822. [ 4.286198] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found
  823. [ 4.293079] rockchip-pcie f8000000.pcie: invalid power supply
  824. [ 4.296499] usb 3-1.1: new high-speed USB device number 3 using xhci-hcd
  825. [ 4.353500] PCI host bridge /pcie@f8000000 ranges:
  826. [ 4.363011] MEM 0xfa000000..0xfbdfffff -> 0xfa000000
  827. [ 4.372488] IO 0xfbe00000..0xfbefffff -> 0xfbe00000
  828. [ 4.380634] rockchip-pcie f8000000.pcie: PCI host bridge to bus 0000:00
  829. [ 4.388527] pci_bus 0000:00: root bus resource [bus 00-1f]
  830. [ 4.396279] pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfbdfffff]
  831. [ 4.399563] usb 3-1.1: New USB device found, idVendor=2109, idProduct=2813
  832. [ 4.399569] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  833. [ 4.399573] usb 3-1.1: Product: USB2.0 Hub
  834. [ 4.399577] usb 3-1.1: Manufacturer: VIA Labs, Inc.
  835. [ 4.429078] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfbe00000-0xfbefffff])
  836. [ 4.436131] pci 0000:00:00.0: [1d87:0100] type 01 class 0x060400
  837. [ 4.436233] pci 0000:00:00.0: supports D1
  838. [ 4.436241] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
  839. [ 4.436609] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  840. [ 4.442759] pci_bus 0000:01: busn_res: can not insert [bus 01-ff] under [bus 00-1f] (conflicts with (null) [bus 00-1f])
  841. [ 4.442793] pci 0000:01:00.0: [1b21:0612] type 00 class 0x010601
  842. [ 4.442835] pci 0000:01:00.0: reg 0x10: initial BAR value 0x00000000 invalid
  843. [ 4.448746] pci 0000:01:00.0: reg 0x10: [io size 0x0008]
  844. [ 4.448764] pci 0000:01:00.0: reg 0x14: initial BAR value 0x00000000 invalid
  845. [ 4.449434] hub 3-1.1:1.0: USB hub found
  846. [ 4.450123] hub 3-1.1:1.0: 4 ports detected
  847. [ 4.465586] pci 0000:01:00.0: reg 0x14: [io size 0x0004]
  848. [ 4.465603] pci 0000:01:00.0: reg 0x18: initial BAR value 0x00000000 invalid
  849. [ 4.471411] pci 0000:01:00.0: reg 0x18: [io size 0x0008]
  850. [ 4.471432] pci 0000:01:00.0: reg 0x1c: initial BAR value 0x00000000 invalid
  851. [ 4.477332] pci 0000:01:00.0: reg 0x1c: [io size 0x0004]
  852. [ 4.477358] pci 0000:01:00.0: reg 0x20: initial BAR value 0x00000000 invalid
  853. [ 4.483156] pci 0000:01:00.0: reg 0x20: [io size 0x0020]
  854. [ 4.483175] pci 0000:01:00.0: reg 0x24: [mem 0x00000000-0x000001ff]
  855. [ 4.483189] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
  856. [ 4.488683] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
  857. [ 4.488753] pci 0000:00:00.0: BAR 8: assigned [mem 0xfa000000-0xfa0fffff]
  858. [ 4.498743] pci 0000:01:00.0: BAR 6: assigned [mem 0xfa000000-0xfa00ffff pref]
  859. [ 4.507458] pci 0000:01:00.0: BAR 5: assigned [mem 0xfa010000-0xfa0101ff]
  860. [ 4.516137] pci 0000:01:00.0: BAR 4: no space for [io size 0x0020]
  861. [ 4.524677] pci 0000:01:00.0: BAR 4: failed to assign [io size 0x0020]
  862. [ 4.529440] pci 0000:01:00.0: BAR 0: no space for [io size 0x0008]
  863. [ 4.533924] pci 0000:01:00.0: BAR 0: failed to assign [io size 0x0008]
  864. [ 4.538398] pci 0000:01:00.0: BAR 2: no space for [io size 0x0008]
  865. [ 4.542833] pci 0000:01:00.0: BAR 2: failed to assign [io size 0x0008]
  866. [ 4.547305] pci 0000:01:00.0: BAR 1: no space for [io size 0x0004]
  867. [ 4.551025] pci 0000:01:00.0: BAR 1: failed to assign [io size 0x0004]
  868. [ 4.554669] pci 0000:01:00.0: BAR 3: no space for [io size 0x0004]
  869. [ 4.558295] pci 0000:01:00.0: BAR 3: failed to assign [io size 0x0004]
  870. [ 4.561986] pci 0000:00:00.0: PCI bridge to [bus 01]
  871. [ 4.565507] pci 0000:00:00.0: bridge window [mem 0xfa000000-0xfa0fffff]
  872. [ 4.582022] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
  873. [ 4.585993] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt
  874. [ 4.589514] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
  875. [ 4.592710] pcie_pme 0000:00:00.0:pcie01: service driver pcie_pme loaded
  876. [ 4.593385] aer 0000:00:00.0:pcie02: service driver aer loaded
  877. [ 4.593495] ahci 0000:01:00.0: version 3.0
  878. [ 4.593510] ahci 0000:01:00.0: enabling device (0000 -> 0002)
  879. [ 4.596867] ahci 0000:01:00.0: SSS flag set, parallel bus scan disabled
  880. [ 4.600188] ahci 0000:01:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
  881. [ 4.603622] ahci 0000:01:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
  882. [ 4.608627] scsi host0: ahci
  883. [ 4.613929] scsi host1: ahci
  884. [ 4.617023] ata1: SATA max UDMA/133 abar m512@0xfa010000 port 0xfa010100 irq 239
  885. [ 4.619953] ata2: SATA max UDMA/133 abar m512@0xfa010000 port 0xfa010180 irq 239
  886. [ 4.656502] EXT4-fs (mmcblk0p7): mounted filesystem with writeback data mode. Opts: (null)
  887. [ 4.678017] usb 4-1.1: new SuperSpeed USB device number 3 using xhci-hcd
  888. [ 4.786582] usb 4-1.1: New USB device found, idVendor=2109, idProduct=0813
  889. [ 4.795076] usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  890. [ 4.795088] usb 4-1.1: Product: USB3.0 Hub
  891. [ 4.795097] usb 4-1.1: Manufacturer: VIA Labs, Inc.
  892. [ 4.801868] hub 4-1.1:1.0: USB hub found
  893. [ 4.802494] hub 4-1.1:1.0: 4 ports detected
  894. [ 4.868509] usb 3-1.1.1: new full-speed USB device number 4 using xhci-hcd
  895. [ 4.976425] usb 3-1.1.1: New USB device found, idVendor=046d, idProduct=c21d
  896. [ 4.993720] usb 3-1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  897. [ 5.008475] dwmmc_rockchip fe320000.dwmmc: Unexpected interrupt latency
  898. [ 5.028050] usb 3-1.1.1: Product: Gamepad F310
  899. [ 5.044474] dwmmc_rockchip fe320000.dwmmc: Unexpected interrupt latency
  900. [ 5.062403] usb 3-1.1.1: Manufacturer: Logitech
  901. [ 5.079338] usb 3-1.1.1: SerialNumber: FBBABEF2
  902. [ 5.092472] dwmmc_rockchip fe320000.dwmmc: Unexpected interrupt latency
  903. [ 5.112781] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  904. [ 5.120920] ata1.00: supports DRM functions and may not be fully accessible
  905. [ 5.121711] input: Logitech Gamepad F310 as /devices/platform/usb1/fe900000.dwc3/xhci-hcd.6.auto/usb3/3-1/3-1.1/3-1.1.1/3-1.1.1:1.0/input/input4
  906. [ 5.135324] ata1.00: ATA-11: Samsung SSD 860 EVO 500GB, RVT02B6Q, max UDMA/133
  907. [ 5.141712] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
  908. [ 5.149025] ata1.00: supports DRM functions and may not be fully accessible
  909. [ 5.157212] ata1.00: configured for UDMA/133
  910. [ 5.164768] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 860 2B6Q PQ: 0 ANSI: 5
  911. [ 5.174461] ata1.00: Enabling discard_zeroes_data
  912. [ 5.179910] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
  913. [ 5.185943] sd 0:0:0:0: [sda] Write Protect is off
  914. [ 5.191385] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  915. [ 5.191477] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  916. [ 5.197944] ata1.00: Enabling discard_zeroes_data
  917. [ 5.204046] sda: sda1
  918. [ 5.210142] ata1.00: Enabling discard_zeroes_data
  919. [ 5.215958] sd 0:0:0:0: [sda] Attached SCSI disk
  920. [ 5.319128] ip_tables: (C) 2000-2006 Netfilter Core Team
  921. [ 5.326974] cgroup: cgroup2: unknown option "nsdelegate"
  922. [ 5.346857] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
  923. [ 5.361923] systemd[1]: Detected architecture arm64.
  924. [ 5.385725] systemd[1]: Set hostname to <rockpro64>.
  925. [ 5.504521] ata2: SATA link down (SStatus 0 SControl 300)
  926. [ 5.622886] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
  927. [ 5.631398] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
  928. [ 5.785273] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work] Not connected. Disabling cdn
  929. [ 5.894829] random: systemd: uninitialized urandom read (16 bytes read, 113 bits of entropy available)
  930. [ 5.917710] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  931. [ 5.940770] random: systemd: uninitialized urandom read (16 bytes read, 114 bits of entropy available)
  932. [ 5.956725] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  933. [ 5.980763] random: systemd: uninitialized urandom read (16 bytes read, 115 bits of entropy available)
  934. [ 5.997766] systemd[1]: Created slice User and Session Slice.
  935. [ 6.014392] random: systemd: uninitialized urandom read (16 bytes read, 115 bits of entropy available)
  936. [ 6.030871] systemd[1]: Started ntp-systemd-netif.path.
  937. [ 6.048717] random: systemd: uninitialized urandom read (16 bytes read, 115 bits of entropy available)
  938. [ 6.061353] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  939. [ 6.080680] random: systemd: uninitialized urandom read (16 bytes read, 115 bits of entropy available)
  940. [ 6.091116] systemd[1]: Reached target System Time Synchronized.
  941. [ 6.108683] random: systemd: uninitialized urandom read (16 bytes read, 115 bits of entropy available)
  942. [ 6.119238] systemd[1]: Reached target Remote File Systems.
  943. [ 6.136970] random: systemd: uninitialized urandom read (16 bytes read, 115 bits of entropy available)
  944. [ 6.147716] systemd[1]: Reached target Local Encrypted Volumes.
  945. [ 6.164667] random: systemd: uninitialized urandom read (16 bytes read, 115 bits of entropy available)
  946. [ 6.176162] systemd[1]: Created slice System Slice.
  947. [ 6.187418] random: systemd: uninitialized urandom read (16 bytes read, 115 bits of entropy available)
  948. [ 6.198358] systemd[1]: Reached target Slices.
  949. [ 6.217161] systemd[1]: Listening on Journal Socket.
  950. [ 6.229624] systemd[1]: Mounting Huge Pages File System...
  951. [ 6.247452] systemd[1]: Mounting Kernel Debug File System...
  952. [ 6.266969] systemd[1]: Starting Nameserver information manager...
  953. [ 6.294651] systemd[1]: Starting Load Kernel Modules...
  954. [ 6.316199] systemd[1]: Starting Create list of required static device nodes for the current kernel...
  955. [ 6.335717] systemd[1]: Starting Remount Root and Kernel File Systems...
  956. [ 6.353256] systemd[1]: Listening on Syslog Socket.
  957. [ 6.369464] systemd[1]: Created slice system-serial\x2dgetty.slice.
  958. [ 6.393137] systemd[1]: Starting Restore / save the current clock...
  959. [ 6.416235] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  960. [ 6.443689] systemd[1]: Listening on udev Kernel Socket.
  961. [ 6.476827] systemd[1]: Reached target Swap.
  962. [ 6.493035] systemd[1]: Listening on udev Control Socket.
  963. [ 6.511387] systemd[1]: Starting udev Coldplug all Devices...
  964. [ 6.533285] systemd[1]: Listening on Journal Audit Socket.
  965. [ 6.551627] systemd[1]: Starting Set the console keyboard layout...
  966. [ 6.571809] systemd[1]: Mounting POSIX Message Queue File System...
  967. [ 6.589132] systemd[1]: Listening on Journal Socket (/dev/log).
  968. [ 6.607914] systemd[1]: Starting Journal Service...
  969. [ 6.631687] systemd[1]: Mounted Huge Pages File System.
  970. [ 6.653282] systemd[1]: Mounted Kernel Debug File System.
  971. [ 6.675905] systemd[1]: Started Load Kernel Modules.
  972. [ 6.690175] systemd[1]: Started Create list of required static device nodes for the current kernel.
  973. [ 6.706029] systemd[1]: Started Remount Root and Kernel File Systems.
  974. [ 6.715573] systemd[1]: Started Restore / save the current clock.
  975. [ 6.730833] systemd[1]: Mounted POSIX Message Queue File System.
  976. [ 6.746568] systemd[1]: Started Nameserver information manager.
  977. [ 6.763304] systemd[1]: Reached target Network (Pre).
  978. [ 6.779193] systemd[1]: Starting Load/Save Random Seed...
  979. [ 6.787086] random: nonblocking pool is initialized
  980. [ 6.800936] systemd[1]: Starting Create Static Device Nodes in /dev...
  981. [ 6.819350] systemd[1]: Mounting FUSE Control File System...
  982. [ 6.834349] systemd[1]: Mounting Kernel Configuration File System...
  983. [ 6.841362] systemd[1]: Starting Apply Kernel Variables...
  984. [ 6.858860] systemd[1]: Started Journal Service.
  985. [ 7.012609] systemd-journald[300]: Received request to flush runtime journal from PID 1
  986. [ 12.486925] rockchip-saradc ff100000.saradc: Looking up vref-supply from device tree
  987. [ 12.486939] rockchip-saradc ff100000.saradc: Looking up vref-supply property in node /saradc@ff100000 failed
  988. [ 12.486969] ff100000.saradc supply vref not found, using dummy regulator
  989. [ 14.440852] rk_gmac-dwmac fe300000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
  990. [ 14.929102] [BT_RFKILL]: bt shut off power
  991. [ 15.206337] FAT-fs (mmcblk0p6): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
  992. [ 15.222221] FAT-fs (mmcblk0p6): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  993. [ 16.079620] zram: Added device: zram0
  994. [ 16.080443] zram: Added device: zram1
  995. [ 16.081614] zram: Added device: zram2
  996. [ 16.082374] zram: Added device: zram3
  997. [ 16.083969] zram: Added device: zram4
  998. [ 16.085578] zram: Added device: zram5
  999. [ 16.142151] zram0: detected capacity change from 0 to 338673664
  1000. [ 16.198518] Adding 330732k swap on /dev/zram0. Priority:5 extents:1 across:330732k SS
  1001. [ 16.201084] zram1: detected capacity change from 0 to 338673664
  1002. [ 16.223884] Adding 330732k swap on /dev/zram1. Priority:5 extents:1 across:330732k SS
  1003. [ 16.226874] zram2: detected capacity change from 0 to 338673664
  1004. [ 16.242679] Adding 330732k swap on /dev/zram2. Priority:5 extents:1 across:330732k SS
  1005. [ 16.244158] zram3: detected capacity change from 0 to 338673664
  1006. [ 16.257285] Adding 330732k swap on /dev/zram3. Priority:5 extents:1 across:330732k SS
  1007. [ 16.258768] zram4: detected capacity change from 0 to 338673664
  1008. [ 16.271637] Adding 330732k swap on /dev/zram4. Priority:5 extents:1 across:330732k SS
  1009. [ 16.273224] zram5: detected capacity change from 0 to 338673664
  1010. [ 16.285373] Adding 330732k swap on /dev/zram5. Priority:5 extents:1 across:330732k SS
  1011. [ 204.898806] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
  1012. [ 243.998384] ata1.00: exception Emask 0x0 SAct 0x7000 SErr 0x0 action 0x6 frozen
  1013. [ 243.999485] ata1.00: failed command: SEND FPDMA QUEUED
  1014. [ 244.000269] ata1.00: cmd 64/01:60:00:00:00/00:00:00:00:00/a0 tag 12 ncq 512 out
  1015. res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
  1016. [ 244.002612] ata1.00: status: { DRDY }
  1017. [ 244.003168] ata1.00: failed command: WRITE FPDMA QUEUED
  1018. [ 244.003966] ata1.00: cmd 61/08:68:00:08:04/00:00:1d:00:00/40 tag 13 ncq 4096 out
  1019. res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
  1020. [ 244.006271] ata1.00: status: { DRDY }
  1021. [ 244.006835] ata1.00: failed command: READ FPDMA QUEUED
  1022. [ 244.007618] ata1.00: cmd 60/08:70:e0:2a:01/00:00:00:00:00/40 tag 14 ncq 4096 in
  1023. res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
  1024. [ 244.009713] ata1.00: status: { DRDY }
  1025. [ 244.010461] ata1: hard resetting link
  1026. [ 244.502404] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  1027. [ 244.503608] ata1.00: supports DRM functions and may not be fully accessible
  1028. [ 244.507156] ata1.00: supports DRM functions and may not be fully accessible
  1029. [ 244.508559] ata1.00: configured for UDMA/133
  1030. [ 244.508594] ata1.00: device reported invalid CHS sector 0
  1031. [ 244.508616] ata1.00: device reported invalid CHS sector 0
  1032. [ 244.508636] ata1.00: device reported invalid CHS sector 0
  1033. [ 244.508696] ata1: EH complete
  1034. [ 244.509075] ata1.00: Enabling discard_zeroes_data
  1035. [ 275.007021] ata1.00: exception Emask 0x0 SAct 0x50000 SErr 0x0 action 0x6 frozen
  1036. [ 275.008145] ata1.00: failed command: READ FPDMA QUEUED
  1037. [ 275.008934] ata1.00: cmd 60/08:80:e0:2a:01/00:00:00:00:00/40 tag 16 ncq 4096 in
  1038. res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
  1039. [ 275.011274] ata1.00: status: { DRDY }
  1040. [ 275.011831] ata1.00: failed command: SEND FPDMA QUEUED
  1041. [ 275.012614] ata1.00: cmd 64/01:90:00:00:00/00:00:00:00:00/a0 tag 18 ncq 512 out
  1042. res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
  1043. [ 275.014898] ata1.00: status: { DRDY }
  1044. [ 275.015499] ata1: hard resetting link
  1045. [ 275.506737] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  1046. [ 275.507660] ata1.00: supports DRM functions and may not be fully accessible
  1047. [ 275.509322] ata1.00: supports DRM functions and may not be fully accessible
  1048. [ 275.510265] ata1.00: configured for UDMA/133
  1049. [ 275.510300] ata1.00: device reported invalid CHS sector 0
  1050. [ 275.510321] ata1.00: device reported invalid CHS sector 0
  1051. [ 275.510603] ata1: EH complete
  1052. [ 275.510847] ata1.00: Enabling discard_zeroes_data
RAW Paste Data