2019-12-07 9:53:33  ★ Dion Winters drives the E46 between the two posts of the car lift and hops out as he kneels
2019-12-07 9:54:14  ★ down and line up the lifting arms on each side under the E46's pinch welds.      ((Dion Winters))
2019-12-07 9:54:31  ★ Dion Winters grabs ahold of the remote and presses on a buttom to raise the car up in the air.
2019-12-07 9:54:51  ★ Dion Winters lays both of his palms on the car's body and attempts to wiggle it to ensure that it's
2019-12-07 9:54:57  ★ safe to work under.      ((Dion Winters))
2019-12-07 9:55:30  ★ Dion Winters opens the top drawer of his tool box and takes out a ratchet as he gets under
2019-12-07 9:55:48  ★ the car and starts loosening the 4 bolts that secure the end of the driveshaft to the      ((Dion Winters))
2019-12-07 9:55:51  ★ transmission.      ((Dion Winters))
2019-12-07 9:56:13  ★ Dion Winters moves to the rear side and supports the driveshaft using his left hand while unbolting
2019-12-07 9:56:49  ★ the 4 bolts that secure the second end of the driveshaft to the differential.      ((Dion Winters))
2019-12-07 9:57:19  ★ Dion Winters safely lowers the driveshaft and tosses it away from beneath the car for more clearance.
2019-12-07 9:59:22  ★ Dion Winters puts the ratchet back in the tool box and grabs a tire iron as he heads to the
2019-12-07 9:59:41  ★ rear left side of the vehicle, using the socket on the tire iron to loosen the lug      ((Dion Winters))
2019-12-07 9:59:49  ★ nuts securing the rear left wheel in place.      ((Dion Winters))
2019-12-07 10:00:09  ★ Dion Winters saves the lug nuts aside and grasps onto the left rear wheel, wiggling it out of place
2019-12-07 10:00:18  ★ and putting it down on the ground.      ((Dion Winters))
2019-12-07 10:01:16  ★ Dion Winters would then head to the right rear side and undo the 5 lug nuts on the rear right
2019-12-07 10:01:25  ★ wheel, taking it off afterwards and placing it down.      ((Dion Winters))
2019-12-07 10:02:03  ★ Dion Winters gets beneath the car and fits his ratchet with the appropriate socket prior to
2019-12-07 10:02:24  ★ using it in order to loosen the 6 bolts that secure each axle to the output plane on the      ((Dion Winters))
2019-12-07 10:02:29  ★ differential.      ((Dion Winters))
2019-12-07 10:06:39  ★ Dion Winters would then head to the left side and and undoes the two bolts securing the rear
2019-12-07 10:07:07  ★ left caliper in place, taking it off and resting it on the lower trailing arm to avoid      ((Dion Winters))
2019-12-07 10:07:14  ★ tension on the brake line.      ((Dion Winters))
2019-12-07 10:07:26  ★ Dion Winters would then slide the brake rotor right off, placing it aside.
2019-12-07 10:07:48  ★ Dion Winters grasps onto the end of the left rear axle and wiggles it right off as it would already be
2019-12-07 10:07:58  ★ loose from the differential.      ((Dion Winters))
2019-12-07 10:08:20  ★ Dion Winters heads to the right side and uses his ratchet to undo the two bolts securing the rear
2019-12-07 10:08:42  ★ caliper in place, resting it on the trailing arm and pulling off the brake rotor      ((Dion Winters))
2019-12-07 10:08:46  ★ as he puts it down.      ((Dion Winters))
2019-12-07 10:09:06  ★ Dion Winters grasps onto the end of the right rear axle and pulls it out with a jiggling motion
2019-12-07 10:09:11  ★ before tossing it away.      ((Dion Winters))
2019-12-07 10:10:29  ★ Dion Winters gets beneath the car and unplugs the sensor from the back of the stock differential
2019-12-07 10:10:45  ★ and puts it out of the way.      ((Dion Winters))
2019-12-07 10:11:06  ★ Dion Winters reaches out for his transmission jack and slides it beneath the stock differential
2019-12-07 10:11:26  ★ as he pumps up the arm to get the top of the trans jack beneath the differential      ((Dion Winters))
2019-12-07 10:11:47  ★ to prevent it from falling at the removal process.      ((Dion Winters))
2019-12-07 10:12:20  ★ Dion Winters uses his ratchet to undo the back bolt on the bushing that secures the stock
2019-12-07 10:12:27  ★ differential to the car's frame.      ((Dion Winters))
2019-12-07 10:13:13  ★ Dion Winters moves to the front and uses the ratchet to undo each one of the 4 bolts that secure
2019-12-07 10:13:21  ★ the stock diff to the rear subframe.      ((Dion Winters))
2019-12-07 10:14:37  ★ Dion Winters grabs the arm of the transmission jack and turns it counter clockwise to safely lower
2019-12-07 10:14:50  ★ the loose differential, completely removing it.      ((Dion Winters))
2019-12-07 10:15:35  ★ Dion Winters takes off the old diff from the top of the transmission jack and tosses it aside before
2019-12-07 10:15:53  ★ unboxing the aftermarket rear, loading it on top of the transmission jack.      ((Dion Winters))
2019-12-07 10:16:42  ★ Dion Winters grabs the spacers that came with the new kit and places them on top of the new
2019-12-07 10:16:57  ★ differential as they need to go between the new diff and the subframe.      ((Dion Winters))
2019-12-07 10:17:23  ★ Dion Winters pumps up the handle of the trans jack to raise the new diff up in the air, lining it up
2019-12-07 10:17:45  ★ with the subframe as he ensures all the mounting holes are aligned.      ((Dion Winters))
2019-12-07 10:18:03  ★ Dion Winters inserts the four bolts that secure it to the rear subframe before using his ratchet to
2019-12-07 10:18:07  ★ fasten them.      ((Dion Winters))
2019-12-07 10:18:49  ★ Dion Winters inserts a bolt in the bushing that holds the new diff to the frame before using his ratchet
2019-12-07 10:18:53  ★ tighten it.      ((Dion Winters))
2019-12-07 10:19:27  ★ Dion Winters unboxes the new performance axles and takes out the rear one before fitting it in place
2019-12-07 10:19:45  ★ and getting beneath the car to line up its end with the new diff output plane.      ((Dion Winters))
2019-12-07 10:19:59  ★ Dion Winters inserts the 6 bolts in the mounting holes and secures them using the ratchet.
2019-12-07 10:20:45  ★ Dion Winters grabs the second axle and inserts in place prior to aligning its end with the
2019-12-07 10:21:03  ★ output plane of the diff, fitting the mounting bolts in the holes and securing them      ((Dion Winters))
2019-12-07 10:21:09  ★ using the ratchet.      ((Dion Winters))
2019-12-07 10:21:52  ★ Dion Winters grabs the removed left rotor and puts it in place prior mounting the rear left caliepr
2019-12-07 10:21:54  Dion Winters: (( caliper ))
2019-12-07 10:22:10  ★ onto it and securing the two bolts holding it in place using his ratchet.      ((Dion Winters))
2019-12-07 10:22:31  ★ Dion Winters heads to the right side and takes the removed brake rotor as he fits it back on
2019-12-07 10:22:45  ★ before getting the caliper and placing it on top of it, inserting two bolts in the mounting      ((Dion Winters))
2019-12-07 10:22:51  ★ holes and fastening them with a ratchet.      ((Dion Winters))
2019-12-07 10:23:29  ★ Dion Winters grasps onto the edging of the rear right wheel and lifts it up as he fits it back on
2019-12-07 10:23:36  ★ and inserts the 5 lug nuts in place.      ((Dion Winters))
2019-12-07 10:24:11  ★ Dion Winters grabs ahold of his tire iron and uses the end with the socket to tighten these lug
2019-12-07 10:24:23  ★ nuts in order to hold the rear right wheel in place.      ((Dion Winters))
2019-12-07 10:24:37  ★ Dion Winters moves to the left side and lifts up the rear left wheel as he fits it back on, tightening
2019-12-07 10:24:51  ★ the 5 lug nuts that secure it in place using his tire iron.      ((Dion Winters))
2019-12-07 10:26:07  ★ Dion Winters gets out from beneath the car and grabs the lift remote as he lowers the car back on
2019-12-07 10:26:10  ★ its wheels.      ((Dion Winters))
2019-12-07 10:26:26  ★ Dion Winters pulls the handle of the driver door to open it before getting inside and pulling the
2019-12-07 10:26:33  ★ hood release handle, popping the hood open.      ((Dion Winters))
2019-12-07 10:26:50  ★ Dion Winters jumps out the car and heads to the front, sliding his figners beneath the hood and
2019-12-07 10:27:00  ★ raising it up as he supports it with the hood prop.      ((Dion Winters))
2019-12-07 10:27:22  ★ Dion Winters grabs ahold of his ratchet and supports the hood with his left hand before using the
2019-12-07 10:27:45  ★ ratchet to undo the two bolts that secure each side of the hood to the hood brackets.      ((Dion Winters))
2019-12-07 10:28:01  ★ Dion Winters would quickly hold the hood with both hands as he finihes securing the last bolt
2019-12-07 10:28:13  ★ grunting as he lifts it up and lowers it down on the ground.      ((Dion Winters))
2019-12-07 10:29:25  ★ Dion Winters grabs ahold of a flathead screwdriver and uses it to undo the negative battery terminal
2019-12-07 10:29:32  ★ disconnecting it afterwards.      ((Dion Winters))
2019-12-07 10:29:46  ★ Dion Winters unscrews the positive battery terminal and grabs his ratchet as he uses it to
2019-12-07 10:29:59  ★ undo the battery mounting belt.      ((Dion Winters))
2019-12-07 10:30:13  ★ Dion Winters fihes the battery right out of the engine bay and places it down.
2019-12-07 10:31:13  ★ Dion Winters uses the screwdriver to undo the clamps on each end of the upper radiator
2019-12-07 10:31:15  ★ hose.      ((Dion Winters))
2019-12-07 10:31:31  ★ Dion Winters takes off the upper radiator hose and tosses it aside before unscrewing the clamps
2019-12-07 10:31:36  ★ on the bottom radiator hose      ((Dion Winters))
2019-12-07 10:31:56  ★ Dion Winters takes off the bottom radiator hose as well, tossing it away.
2019-12-07 10:32:26  ★ Dion Winters uses his ratchet to undo the two bolts on each side of the radiator's upper mounting
2019-12-07 10:32:30  ★ brackets.      ((Dion Winters))
2019-12-07 10:32:50  ★ Dion Winters reaches down and undoes the bottom radiator mounting bracket to loosen it up.
2019-12-07 10:33:18  ★ Dion Winters disconnects the wire connector on the radiator fan and grasps onto the radiator as
2019-12-07 10:33:33  ★ he lifts it up, jiggling to make clearance.      ((Dion Winters))
2019-12-07 10:33:58  ★ Dion Winters rests it down on the ground and grabs ahold of his screwdriver before undoing
2019-12-07 10:34:22  ★ the screw on each corner of the fan, separating it from the radiator and saving it      ((Dion Winters))
2019-12-07 10:34:24  ★ aside.      ((Dion Winters))
2019-12-07 10:35:14  ★ Dion Winters grabs his ratchet and uses it to undo the three bolts that secure the exhaust heat
2019-12-07 10:35:35  ★ shield that covers the exhaust manifold.      ((Dion Winters))
2019-12-07 10:36:35  ★ Dion Winters would then proceed to undo the 9 bolts that hold the exhaust manifold to the engine
2019-12-07 10:36:38  ★ head.      ((Dion Winters))
2019-12-07 10:42:57  ★ Dion Winters uses the screwdriver to loosen the clamp on each end of the air intake hose, taking it
2019-12-07 10:43:04  ★ off as he jiggles it out, tossing it away.      ((Dion Winters))
2019-12-07 10:43:30  ★ Dion Winters starts plugging off the connects of the main engine harness as he pulls on it to
2019-12-07 10:43:38  ★ tear it off.      ((Dion Winters))
2019-12-07 10:44:25  ★ Dion Winters unhooks the throttle cable from the throttle body and tucks it aside in the engine bay
2019-12-07 10:44:42  ★ ensuring that it won't get damaged when the old engine is being pulled out.      ((Dion Winters))
2019-12-07 10:45:12  ★ Dion Winters grabs an open end wrench and uses it to loosen the nut on each end of the fuel
2019-12-07 10:45:14  ★ feed line.      ((Dion Winters))
2019-12-07 10:45:29  ★ Dion Winters takes off the fuel feed line and tosses it away before loosening the nut on each
2019-12-07 10:45:38  ★ end of the return line, also taking it off and throwing it away.      ((Dion Winters))
2019-12-07 10:46:46  ★ Dion Winters takes a flathead screwdriver and uses it to undo the four screws that hold the
2019-12-07 10:46:56  ★ airbox in place, taking it off and placing it down on the ground.      ((Dion Winters))
2019-12-07 10:48:09  ★ Dion Winters grabs the lift remote and presses on a button to raise the car up in the air before
2019-12-07 10:48:51  ★ getting under it and using his ratchet to loosen the two bolts on the exhaust flange      ((Dion Winters))
2019-12-07 10:49:03  ★ between the exhaust manifold and the mid pipe.      ((Dion Winters))
2019-12-07 10:49:49  ★ Dion Winters undoes the midpipe hanger bracket and moves to the rear side as he carefully undoes
2019-12-07 10:50:07  ★ the bolts on the rear pipe hanger brackets, standing out of the way as he allows      ((Dion Winters))
2019-12-07 10:50:12  ★ the exhaust assembly to fall down.      ((Dion Winters))
2019-12-07 10:50:31  ★ Dion Winters bends overs and grabs onto it, sliding it right out from beneath the car.
2019-12-07 10:51:10  ★ Dion Winters gets out from under the car and presses on a buttom from the lift remote, lowering
2019-12-07 10:51:13  ★ the car back down.      ((Dion Winters))
2019-12-07 10:51:33  ★ Dion Winters opens the driver door and sits hisself on the driver seat before taking off the plastic
2019-12-07 10:51:39  ★ cover around the shifter.      ((Dion Winters))
2019-12-07 10:52:00  ★ Dion Winters uses his ratchet to undo the bolt on each corner of the plate that secures the
2019-12-07 10:52:05  ★ shifter in place.      ((Dion Winters))
2019-12-07 10:52:20  ★ Dion Winters takes off that metal plate and saves it on the passenger seat before jumping out
2019-12-07 10:52:30  ★ and pressing on a button to raise the car back up.      ((Dion Winters))
2019-12-07 10:52:49  ★ Dion Winters gets under the car and slides his transmission jack along, lining it up with the
2019-12-07 10:53:05  ★ transmission and pumping the jack arm to raise the saddle right beneath the      ((Dion Winters))
2019-12-07 10:53:19  ★ transmission as he supports it to prevent it from falling in the removal process.      ((Dion Winters))
2019-12-07 10:53:55  ★ Dion Winters plugs off the speed sensor along with the wire connector on the starter before
2019-12-07 10:55:09  ★ using his ratchet to undo the 10 bolts that secure the bell housing to the engine.      ((Dion Winters))
2019-12-07 10:55:52  ★ Dion Winters uses the ratchet to undo the two bolts on each transmission mount before loosening
2019-12-07 10:56:07  ★ the transmission crossmember and taking it off.      ((Dion Winters))
2019-12-07 10:56:23  ★ Dion Winters grasps onto the arm of the transmission jack, slowly turning counter clockwise to
2019-12-07 10:56:34  ★ lower the stock transmission down.      ((Dion Winters))
2019-12-07 10:56:53  ★ Dion Winters slides the transmission jack out from beneath the car and unloads the stock transmission
2019-12-07 10:57:00  ★ off of its saddle.      ((Dion Winters))
2019-12-07 10:57:37  ★ Dion Winters gets back under the car and loosens the two bolts on each of the 3 engine mounts.
2019-12-07 10:57:58  ★ Dion Winters gets out from under the car and uses the lift's remote to lower the car back down.
2019-12-07 10:58:21  ★ Dion Winters lays his palms on the engine chisrypicker before pushing it near the engine bay.
2019-12-07 10:58:41  ★ Dion Winters grasps onto the loose exhaust manifold and jiggles it out of place as he
2019-12-07 10:58:45  ★ throws it away.      ((Dion Winters))
2019-12-07 11:01:22  ★ Dion Winters takes out two engine lifting brackets from the tool box's top drawer and fits them on the
2019-12-07 11:02:01  ★ holes supposed to be used to mount the exhaust manifold before securing them      ((Dion Winters))
2019-12-07 11:02:04  ★ with a ratchet.      ((Dion Winters))
2019-12-07 11:02:22  ★ Dion Winters grabs the chain from the chisrypicker and inserts it in through the hole in the first
2019-12-07 11:02:37  ★ engine lifting bracket before going through the second one and finally securing it back      ((Dion Winters))
2019-12-07 11:02:58  ★ at the chisry picker's leveler to ensure that the engine is safely chained to the      ((Dion Winters))
2019-12-07 11:03:02  ★ chisrypicker.      ((Dion Winters))
2019-12-07 11:03:19  ★ Dion Winters keeps his eyes on the engine bay as he grabs the arm of the engine crane, pumping it
2019-12-07 11:03:30  ★ up to slowly raise the old engine out of the engine bay.      ((Dion Winters))
2019-12-07 11:03:50  ★ Dion Winters would do it extremely slowly to ensure that he doesn't bend the frame or damage
2019-12-07 11:03:54  ★ any part.      ((Dion Winters))
2019-12-07 11:04:35  ★ Dion Winters puhes the engine crane away from the car as soon as the engine gets to a level
2019-12-07 11:04:40  ★ highis than the engine bay.      ((Dion Winters))
2019-12-07 11:05:00  ★ Dion Winters slowly turns the arm of the engine crane to lower the engine on a wooden pallet.
2019-12-07 11:05:29  ★ Dion Winters uses his ratchet to undo the two engine lifting brackets off of the engine and moves
2019-12-07 11:05:35  ★ the crane away from the old engine.      ((Dion Winters))
2019-12-07 11:11:45  ★ Dion Winters uses his ratchet to undo the bolts that secure the firewall foam layer that isolates
2019-12-07 11:12:04  ★ the heat and sound between the engine bay and the interior.      ((Dion Winters))
2019-12-07 11:12:36  ★ Dion Winters starting tearing the foam layer right off as he tosses the removed parts aside.
2019-12-07 11:13:03  ★ Dion Winters would completely reveal the firewall and the transmission tunnel when he's done
2019-12-07 11:13:06  ★ taking off the foam layer.      ((Dion Winters))
2019-12-07 11:16:15  ★ Dion Winters takes his plastic mallet and starts tapping the mallet against the firewall to bend it
2019-12-07 11:16:25  ★ inward in order to make clearance for the LS3 engine.      ((Dion Winters))
2019-12-07 11:17:04  ★ Dion Winters moves on to the transmission tunnel as he taps the curves with the mallet to
2019-12-07 11:17:14  ★ bend them inward for the T56 transmission to fit in thise.      ((Dion Winters))
2019-12-07 11:24:08  ★ Dion Winters puts the mallet aside and heads to the new engine as he takes a look around, ensuring
2019-12-07 11:24:17  ★ that everything is thise.      ((Dion Winters))
2019-12-07 11:26:20  ★ Dion Winters unboxes the transmission grunts as he lifts it up carefully moving it on top of the
2019-12-07 11:26:25  ★ transmission jack.      ((Dion Winters))
2019-12-07 11:27:30  ★ Dion Winters puhes the transmission jack near the engine transmission shaft before taking the
2019-12-07 11:27:46  ★ flywheel out of the box and fitting it in place as he inserts the 6 bolts that secure it      ((Dion Winters))
2019-12-07 11:27:50  ★ in place in the holes.      ((Dion Winters))
2019-12-07 11:28:09  ★ Dion Winters uses his ratchet to tighten these 6 bolts in order to secure the flywheel to the engine.
2019-12-07 11:29:56  ★ Dion Winters takes out the clutch and fits it onto the engine output shaft before taking out
2019-12-07 11:30:11  ★ the pressure plate and fitting it on against the clutch disk.      ((Dion Winters))
2019-12-07 11:30:38  ★ Dion Winters inserts the four bolts that secure the pressure plate to the engine before tightening
2019-12-07 11:30:43  ★ them using a ratchet.      ((Dion Winters))
2019-12-07 11:31:01  ★ Dion Winters would then line up the bell housing with the mounting holes on the engine before
2019-12-07 11:31:56  ★ inserting the 8 bolts through the bell housing and the engine holes.      ((Dion Winters))
2019-12-07 11:32:11  ★ Dion Winters uses his ratchet to secure these 8 bolts before fitting his torque wrench with the
2019-12-07 11:32:27  ★ right socket and torquing each one of these 8 bolts to 25ft-lb.      ((Dion Winters))
2019-12-07 11:33:19  ★ Dion Winters grabs the chisrypicker and puhes it near the engine and transmission assembly
2019-12-07 11:33:33  ★ as he grabs the chain and inserts it through the engine's lifting brackets.      ((Dion Winters))
2019-12-07 11:33:47  ★ Dion Winters secures the chain and pumps the arm of the chisry picker to lift the engine up in the
2019-12-07 11:34:01  ★ air, approximately a bit highis than the E46's engine bay for clearance.      ((Dion Winters))
2019-12-07 11:34:12  ★ Dion Winters puhes the chisry picker as he moves it near the engine bay.
2019-12-07 11:34:32  ★ Dion Winters uses the adjusting bolt on the chisry picker's leveler to slightly tilt the transmission
2019-12-07 11:34:48  ★ so that it's lower than the engine level in order for it to fit into its tunnel.      ((Dion Winters))
2019-12-07 11:35:11  ★ Dion Winters leaves the engine hanging in the air and takes out the transmission and engine mounts from
2019-12-07 11:35:26  ★ the package.      ((Dion Winters))
2019-12-07 11:36:31  ★ Dion Winters fits the engine mounts to the engine and inserts the bolts before tightening them
2019-12-07 11:36:34  ★ using a ratchet.      ((Dion Winters))
2019-12-07 11:46:10  ★ Dion Winters would then fit the transmission mounts onto the bell housing, inserting the bolts
2019-12-07 11:46:21  ★ in place and securing them using his ratchet.      ((Dion Winters))
2019-12-07 11:47:58  ★ Dion Winters grabs the chisry picker's arm and turns counter clockwise in order to slowly lower
2019-12-07 11:48:09  ★ the engine and transmission assembly into the E46's bay.      ((Dion Winters))
2019-12-07 11:48:31  ★ Dion Winters would be extremely careful, watching out to damage any of the parts and ensuring
2019-12-07 11:48:43  ★ that the engine and the transmission have enough clearance to      ((Dion Winters))
2019-12-07 11:48:47  ★ drop into the engine bay.      ((Dion Winters))
2019-12-07 11:49:14  ★ Dion Winters stops once the transmission is in its tunnel, he'd use the adjusting bolt on the engine
2019-12-07 11:49:32  ★ crane's leveler to slowly tilt the engine and tranny assembly so that they're both      ((Dion Winters))
2019-12-07 11:49:38  ★ at the same level of height.      ((Dion Winters))
2019-12-07 11:49:56  ★ Dion Winters gets back to the chisry picker's arm and turns counter clockwise to drop off the
2019-12-07 11:50:01  ★ engine on its mounts.      ((Dion Winters))
2019-12-07 11:52:36  ★ Dion Winters takes off the chain from the engine's lifting brackets and moves the chisry picker
2019-12-07 11:52:42  ★ away from the car for more clearance.      ((Dion Winters))
2019-12-07 11:53:23  ★ Dion Winters grabs the lift's remote and presses on a button to raise the car up in the air.
2019-12-07 11:53:34  ★ Dion Winters gets under the car after fitting his ratchet with the right socket.
2019-12-07 11:53:56  ★ Dion Winters uses the ratchet to tighten the two bolts on each of the two transmission mounts.
2019-12-07 11:54:19  ★ Dion Winters grabs ahold of the new transmission crossmember and fits it on under the transmission
2019-12-07 11:54:33  ★ as he inserts the bolts in the holes and fastens them with his ratchet to secure the      ((Dion Winters))
2019-12-07 11:54:43  ★ crossmember beneath the transmission.      ((Dion Winters))
2019-12-07 12:00:16  ★ Dion Winters grabs ahold of the new driveshaft that came with the engine and moves it on the transmission
2019-12-07 12:00:30  ★ jack before pumping up the lever to raise the shaft up beneath the car.      ((Dion Winters))
2019-12-07 12:00:38  ★ Dion Winters lines up the flange with the output shaft on the
2019-12-07 12:00:52  ★ transmission before inserting the four bolts in and tightening them using his ratchet.      ((Dion Winters))
2019-12-07 12:01:06  ★ Dion Winters moves on to the rear side and connects the end of the driveshaft to the aftermarket
2019-12-07 12:01:23  ★ differential prior to hand fitting the bolts in place and securing them tightly.      ((Dion Winters))
2019-12-07 12:04:12  ★ Dion Winters uses the ratchet to secure the four bolts that hold the driveshaft to the differential.
2019-12-07 12:05:08  ★ Dion Winters lowers the transmission jack after the driveshaft is completely secured in place.
2019-12-07 12:05:16  ★ Dion Winters moves the transmission jack away from beneath the car.
2019-12-07 12:44:51  ★ Dion Winters grabs the lift remote and presses on a button to lower the car back down.
2019-12-07 12:45:17  ★ Dion Winters grabs the throttle cable and hooks its end on the new engine's throttle body before
2019-12-07 12:45:22  ★ securing it.      ((Dion Winters))
2019-12-07 12:46:17  ★ Dion Winters tears off the carton on the box that contains the fuel line kit's package before taking out
2019-12-07 12:46:32  ★ the feed and return lines along with the mounting equipment.      ((Dion Winters))
2019-12-07 12:46:55  ★ Dion Winters installs the o rings on each end of the fuel feed line and connects one end to the
2019-12-07 12:47:19  ★ outlet from the firewall, the othis end to the port on the fuel rail.      ((Dion Winters))
2019-12-07 12:47:33  ★ Dion Winters takes an open end wrench and secures the nut that secures each end of the fuel
2019-12-07 12:47:37  ★ feed line.      ((Dion Winters))
2019-12-07 12:48:01  ★ Dion Winters fits the fuel return line with the o rings on its ends and plugs one end to the port on
2019-12-07 12:48:17  ★ the firewall, the othis end to the fuel regulator on the fuel rail.      ((Dion Winters))
2019-12-07 12:48:32  ★ Dion Winters uses the open end wrench to tighten the nut on each end to secure the fuel return
2019-12-07 12:48:35  ★ line in place.      ((Dion Winters))
2019-12-07 12:49:55  ★ Dion Winters grabs ahold of the removed fan and fits it onto the new radiator before getting
2019-12-07 12:50:12  ★ his screwdriver and tightening the screw on each corner of the fan to secure it to      ((Dion Winters))
2019-12-07 12:50:16  ★ the new radiator.      ((Dion Winters))
2019-12-07 12:50:42  ★ Dion Winters lifts up the radiator and carefully lowers it into the engine bay as he lines up the
2019-12-07 12:50:50  ★ mounting holes with the radiator bracket.      ((Dion Winters))
2019-12-07 12:51:29  ★ Dion Winters uses his ratchet to tighten the two bolts on each of the 3 radiator mounting brackets
2019-12-07 12:51:47  ★ before unboxing the hose kit and taking out the upper radiator hose, connecting one      ((Dion Winters))
2019-12-07 12:51:56  ★ end to the radiator's port and the othis one to the      ((Dion Winters))
2019-12-07 12:52:10  ★ port on the water pump.      ((Dion Winters))
2019-12-07 12:52:24  ★ Dion Winters slides two clamps on each end of the exhaust and uses a flathead screwdriver to
2019-12-07 12:52:36  ★ tighten the screw on each clamp in order to compress it and secure the hose.      ((Dion Winters))
2019-12-07 12:52:56  ★ Dion Winters takes out the lower radiator hose and slides a clamp on each end before connecting one
2019-12-07 12:53:17  ★ to the appropriate port from the radiator and the othis one to the port from the engine      ((Dion Winters))
2019-12-07 12:53:18  ★ block.      ((Dion Winters))
2019-12-07 12:53:33  ★ Dion Winters uses the screwdriver to tighten the screws on the clamps in order to compress them.
2019-12-07 12:54:31  ★ Dion Winters tears the carton on the air intake kit before taking out the new airbox and fitting it
2019-12-07 12:54:45  ★ in place prior to securing it using the 4 screws and the screwdriver.      ((Dion Winters))
2019-12-07 12:55:07  ★ Dion Winters takes out the air intake hose and slides a clamp on each end before connecting
2019-12-07 12:55:24  ★ one end to the supercharger's air inlet and the othis end to the pod filter from the      ((Dion Winters))
2019-12-07 12:55:27  ★ air intake kit.      ((Dion Winters))
2019-12-07 12:55:41  ★ Dion Winters uses the screwdriver to compress the two clamps by tightening the screws.
2019-12-07 12:56:01  ★ Dion Winters lays the pod filter in the airbox and grabs the plastic lid before putting it on the airbox
2019-12-07 12:56:04  ★ to cover it.      ((Dion Winters))
2019-12-07 12:56:28  ★ Dion Winters uses his screwdriver to tighten the screw on each of the 4 corners from the airbox's
2019-12-07 12:56:31  ★ lid.      ((Dion Winters))
2019-12-07 12:57:32  ★ Dion Winters bends over and picks up the removed battery as he places it in its location prior to
2019-12-07 12:57:48  ★ fitting the mounting belt and securing it by tightening the bolt on each side of the      ((Dion Winters))
2019-12-07 12:57:53  ★ belt using a ratchet.      ((Dion Winters))
2019-12-07 13:00:44  ★ Dion Winters reconnects both battery terminals and uses a screwdriver to tighten them in place.
2019-12-07 13:02:18  ★ Dion Winters takes the new stainless steel headers and drops one on each side of the V8 engine
2019-12-07 13:02:37  ★ ensuring that the mounting holes are lined up togethis before grabbing the new      ((Dion Winters))
2019-12-07 13:03:03  ★ gaskets and inserting one between each of the headers and the engine.      ((Dion Winters))
2019-12-07 13:03:20  ★ Dion Winters inserts the bolts in the mounting holes on each side of the headers and grabs his
2019-12-07 13:03:42  ★ ratchet as he uses it to tighten the nuts on each side of the headers.      ((Dion Winters))
2019-12-07 13:04:19  ★ Dion Winters plug the wire connector to the fan on the radiator before glancing around the
2019-12-07 13:04:32  ★ engine bay, reconnecting any necessary wiring.      ((Dion Winters))
2019-12-07 13:05:16  ★ Dion Winters presses on a button from the lift remote to raise the car up in the air as he gets under it
2019-12-07 13:05:29  ★ to reconnect the speed sensor on the new transmission along with the wire connector      ((Dion Winters))
2019-12-07 13:05:32  ★ to the starter.      ((Dion Winters))
2019-12-07 13:07:04  ★ Dion Winters puts the ratchet aside and takes a tire iron as he gets to the side, undoing the lug
2019-12-07 13:07:09  ★ nuts on the left front wheel.      ((Dion Winters))
2019-12-07 13:07:19  ★ Dion Winters grasps onto the wheel and pulls it right out as he places it down.
2019-12-07 13:07:41  ★ Dion Winters slightly lowers the car down, approximately half a meter above the ground before opening
2019-12-07 13:07:58  ★ the driver door and steering all the way to the left to give Mariana more clearance      ((Dion Winters))
2019-12-07 13:08:06  ★ to the steering parts.      ((Dion Winters))
2019-12-07 13:08:21  ★ Dion Winters shuts the door and takes a knee next to the left front fender.
2019-12-07 13:10:25  ★ Dion Winters grabs a hydraulic jack and slides it beneath the control arm before pumping the arm
2019-12-07 13:10:40  ★ to raise the saddle right beneath the control arm to release the tension on the bolts      ((Dion Winters))
2019-12-07 13:10:45  ★ for easy removal.      ((Dion Winters))
2019-12-07 13:11:45  ★ Dion Winters uses the ratchet to undo the 3 bolts that secure the left control arm, jiggling it out of
2019-12-07 13:11:49  ★ place afterwards.      ((Dion Winters))
2019-12-07 13:13:48  ★ Dion Winters tosses it aside before grabbing the new control arm from the wisefab kit, fitting it
2019-12-07 13:14:00  ★ in place and inserting the each of the three mounting bolts in the holes.      ((Dion Winters))
2019-12-07 13:14:23  ★ Dion Winters secures them using his ratchet and gives it a shake to ensure it's firmly installed.
2019-12-07 13:17:48  ★ Dion Winters takes a needlenose pliers and uses it to open up the cotter pin on the nut securing
2019-12-07 13:17:56  ★ the outer tie rod.      ((Dion Winters))
2019-12-07 13:18:19  ★ Dion Winters would then pull it right out of the hole in the nut.
2019-12-07 13:18:39  ★ Dion Winters takes the ratchet and loosens the nut on the bottom of the outer tie rod to loosen it.
2019-12-07 13:19:09  ★ Dion Winters grabs ahold of a plastic mallet and taps the bottom of the outer rod to force it out
2019-12-07 13:19:26  ★ of the slotting on the steering knuckle      ((Dion Winters))
2019-12-07 13:23:04  ★ Dion Winters uses the needle nose pliers to compress the clamp that holds the rack boot tubing.
2019-12-07 13:23:18  ★ Dion Winters pulls the clamp right off and grasps onto the rack boot as he pulls it out too.
2019-12-07 13:25:40  ★ Dion Winters grabs ahold of a tie rod tool and fits it on the left inner tie rod before turning
2019-12-07 13:25:46  ★ counter clockwise to take it off.      ((Dion Winters))
2019-12-07 13:26:05  ★ Dion Winters grabs the new tire rod and fits the tie rod tool on it before fitting it in place and
2019-12-07 13:26:10  ★ tightening it using the tool.      ((Dion Winters))
2019-12-07 13:26:27  ★ Dion Winters fits the rack boot tubing back on along with the clamp.
2019-12-07 13:27:02  ★ Dion Winters slides the outer tie rod in the slotting on the left steering knuckle before fitting the nut
2019-12-07 13:27:25  ★ on the bottom and using a ratcheting wrench to tighten in order to secure the tie rods.      ((Dion Winters))
2019-12-07 13:28:24  ★ Dion Winters grabs ahold of the removed wheel and fits it back on before inserting the lug nuts
2019-12-07 13:28:37  ★ in the holes, using a tire iron to tighten these in a criss cross pattern.      ((Dion Winters))
2019-12-07 13:28:53  ★ Dion Winters puhes hisself up and heads to the driver door as he opens it and steers all the way to the
2019-12-07 13:29:12  ★ right to make clearance to the right steering parts.      ((Dion Winters))
2019-12-07 13:29:31  ★ Dion Winters heads to the right side and kneels down as he uses the tire iron to remove the 5
2019-12-07 13:29:39  ★ lug nuts on the right front wheel.      ((Dion Winters))
2019-12-07 13:29:54  ★ Dion Winters jiggles the wheel off of the car and puts it down before getting his ratchet and using
2019-12-07 13:30:38  ★ it to remove each of the three nuts that secure the right lower control arm in place.      ((Dion Winters))
2019-12-07 13:30:59  ★ Dion Winters slides the jack below the control arm and raises the saddle up to support it right before
2019-12-07 13:31:07  ★ taking off the last bolt.      ((Dion Winters))
2019-12-07 13:31:23  ★ Dion Winters uses the ratchet to take off the last bolt before grabbing the new control arm and
2019-12-07 13:31:27  ★ fitting it in place.      ((Dion Winters))
2019-12-07 13:31:44  ★ Dion Winters inserts the three bolts in the mounting holes and uses the ratchet to secure them
2019-12-07 13:31:46  ★ one by one.      ((Dion Winters))
2019-12-07 13:36:11  ★ Dion Winters uses the needle nose pliers to straighten up the clip on the bottom nut of the
2019-12-07 13:36:20  ★ outer tie rod prior to pulling it out of place.      ((Dion Winters))
2019-12-07 13:36:37  ★ Dion Winters uses the ratchet to undo the nut securing the outer tie rod to the steering knuckle before
2019-12-07 13:36:58  ★ grabbing the mallet and tapping the tie rod to knock it out of the steering knuckle.      ((Dion Winters))
2019-12-07 13:37:43  ★ Dion Winters uses the needle nose pliers to compress the clamp that secure the rack boot before pulling
2019-12-07 13:37:45  ★ it off.      ((Dion Winters))
2019-12-07 13:38:03  ★ Dion Winters grasps onto the boot and pulls it right off the reveal the ball joint of the inner tie rod.
2019-12-07 13:38:22  ★ Dion Winters fits the tie rod tool on the inner tie rod and turns counter clockwise to loosen it
2019-12-07 13:38:27  ★ as he eventually takes it off.      ((Dion Winters))
2019-12-07 13:38:53  ★ Dion Winters grabs the new assembled tie rod from the wisefab kit and slides the outer tie rod
2019-12-07 13:39:07  ★ in the slot from the right steering knuckle before fitting the nut that secures it      ((Dion Winters))
2019-12-07 13:39:13  ★ and tightening it using his ratchet.      ((Dion Winters))
2019-12-07 13:39:38  ★ Dion Winters fits the tie rod tool on the outer tie rod and fits it in place before turning the tool
2019-12-07 13:39:48  ★ in order to secure the inner tie rod.      ((Dion Winters))
2019-12-07 13:40:13  ★ Dion Winters slides the rack boot back on along with the clamp as he secures them in place.
2019-12-07 13:43:34  ★ Dion Winters grabs the removed wheel and puts it back in place as he uses the tire iron to
2019-12-07 13:43:45  ★ tighten the five lug nuts on the right front wheel.      ((Dion Winters))
2019-12-07 13:44:09  ★ Dion Winters puts the tire iron aside and bends over as he grasps onto the edging of the removed hood,
2019-12-07 13:44:29  ★ lifting it up and properly fitting it back on as he supports it up with his left hand while      ((Dion Winters))
2019-12-07 13:44:47  ★ using his right one to tightening two bolts on each side of the hood, securing it to      ((Dion Winters))
2019-12-07 13:44:56  ★ its mounting brackets before shutting it down.      ((Dion Winters))
2019-12-07 14:14:37  ★ Dion Winters presses on a button from the lift's remote to raise the car up in the air as he gets under
2019-12-07 14:15:54  ★ the car, sliding the transmission jack along with his and placing it beneath the fuel tank.      ((Dion Winters))
2019-12-07 14:16:46  ★ Dion Winters uses his ratchet to undo the bolt on each side of the two fuel tank straps.
2019-12-07 14:17:03  ★ Dion Winters would then put the ratchet aside and grab his open end wrench, using it to loosen the nuts
2019-12-07 14:17:14  ★ that secure the fuel return line and the fuel feed line to the tank.      ((Dion Winters))
2019-12-07 14:17:29  ★ Dion Winters grasps onto the arm of the transmission jack and turns it counter clockwise to lower
2019-12-07 14:17:34  ★ the fuel tank down.      ((Dion Winters))
2019-12-07 14:17:52  ★ Dion Winters slides the transmission jack out from beneath the car and takes a knee as he grabs
2019-12-07 14:18:19  ★ Dion Winters his ratchet, using it to undo the 5 bolts securing the fuel pump assembly to the fuel tank.
2019-12-07 14:18:53  ★ Dion Winters fihes the fuel pump assembly right out of the fuel tank before placing it down and using
2019-12-07 14:19:48  ★ his screwdriver to loosen the screws on the plastic lid.      ((Dion Winters))
2019-12-07 14:20:06  ★ Dion Winters takes off the plastic lid and disconnects the wire connector from the stock fuel
2019-12-07 14:20:25  ★ pump before taking his new aftermarket fuel pump, dropping it in the fuel pump assembly      ((Dion Winters))
2019-12-07 14:20:40  ★ and connecting the wire connector to it.      ((Dion Winters))
2019-12-07 14:20:56  ★ Dion Winters puts the lid back on and uses his screwdriver to tighten it before grabbing the fuel
2019-12-07 14:21:04  ★ pump assembly and dropping it in the fuel tank.      ((Dion Winters))
2019-12-07 14:21:26  ★ Dion Winters inserts the 5 bolts into the mounting holes and uses his ratcheting wrench to tighten
2019-12-07 14:21:37  ★ them in order to secure the fuel pump assembly to the fuel tank.      ((Dion Winters))
2019-12-07 14:21:57  ★ Dion Winters slides the transmission jack with the fuel tank on top of it under the car before pumping
2019-12-07 14:22:10  ★ the jack's arm to raise the fuel tank up in place.      ((Dion Winters))
2019-12-07 14:22:32  ★ Dion Winters properly positions it back in place and reconnects the fuel feed line along with
2019-12-07 14:23:12  ★ the fuel return line prior to using his ratchet to secure the bolt on each side of the      ((Dion Winters))
2019-12-07 14:23:23  ★ two fuel tank straps to hold it in place.      ((Dion Winters))
2019-12-07 14:23:43  ★ Dion Winters secures the fuel return line and the fuel feed line by tightening the nut on each end
2019-12-07 14:23:48  ★ using an open end wrench.      ((Dion Winters))
2019-12-07 14:33:33  ★ Dion Winters heads to his workbench and grabs a welding headshield as he puts it on to protect
2019-12-07 14:33:56  ★ his eyes and face from the heat that the welder produces.      ((Dion Winters))
2019-12-07 15:07:56  ★ Dion Winters grabs two 45 degree pipes from the DIY exhaust kit and places them togethis as he forms an
2019-12-07 15:07:59  ★ X shape.      ((Dion Winters))
2019-12-07 15:08:34  ★ Dion Winters reaches out for a market and marks the contact surface between these two pipes
2019-12-07 15:09:06  ★ before grabbing his saw and carefully spinning it as he lines up the saw with the      ((Dion Winters))
2019-12-07 15:09:50  ★ marked line, cutting a small piece from each pipe so that they could merge togethis      ((Dion Winters))
2019-12-07 15:09:53  ★ to form the X.      ((Dion Winters))
2019-12-07 15:39:41  ★ Dion Winters puts on a pair of protective gloves and adjusts the welder machine to 10 amps before
2019-12-07 15:40:56  ★ grabbing the torch along with a welding cable, he'd place the tip of the cable      ((Dion Winters))
2019-12-07 15:41:21  ★ against the shared surface of the two 45 degree pipes, heating it up with the torch from the      ((Dion Winters))
2019-12-07 15:41:33  ★ welder in order to weld the two pipes togethis.      ((Dion Winters))
2019-12-07 15:43:51  ★ Dion Winters grabs two more 45 degree tubes and places one next to each side of the X shaped
2019-12-07 15:44:07  ★ pipes to form the translation between the X and the straight pipes.      ((Dion Winters))
2019-12-07 15:49:06  ★ Dion Winters places the tip of the welding rod against the surface between the X pipes and the othis two
2019-12-07 15:49:22  ★ 45 degree pipes as he presses on the trigger, welding all around the pipes to      ((Dion Winters))
2019-12-07 15:49:28  ★ secure them togethis.      ((Dion Winters))
2019-12-07 15:54:24  ★ Dion Winters gets two straight pipes and places one on each side to form the rear pipes.
2019-12-07 15:54:48  ★ Dion Winters places the tip of the welding rod against the shared surface of the straight pipes and
2019-12-07 15:55:16  ★ the 45 degree pipes as he presses on the trigger to weld them togethis, ensuring      ((Dion Winters))
2019-12-07 15:55:45  ★ that he leaves no leaks.      ((Dion Winters))
2019-12-07 15:56:34  ★ Dion Winters turns of the stick welder machine and puts the tools away as he then takes off the
2019-12-07 15:57:05  ★ headguard, carrying the exhaust system he built and placing it on trans jack before sliding      ((Dion Winters))
2019-12-07 15:57:13  ★ it beneath the car and raising it up.      ((Dion Winters))
2019-12-07 15:57:34  ★ Dion Winters lines up the two end with the tip of the exhaust heads before sliding a clamp on each
2019-12-07 15:57:42  ★ end and tightening them using a screwdriver.      ((Dion Winters))
2019-12-07 15:58:57  ★ Dion Winters puts the headguard back on and turns on the stick welder machine prior to getting beneath
2019-12-07 15:59:26  ★ the car and welding the tip of an exhaust hanger to the exhaust pipe, the othis end      ((Dion Winters))
2019-12-07 15:59:30  ★ to the car's chassis.      ((Dion Winters))
2019-12-07 15:59:50  ★ Dion Winters welds anothis exhaust hanger to the pipe on the othis side before giving the exhaust
2019-12-07 16:00:16  ★ a shake to ensure that no rattling is thise.      ((Dion Winters))
2019-12-07 16:00:51  ★ Dion Winters grabs the lift remote and presses on a button to lower the car down after moving the
2019-12-07 16:01:06  ★ transmission jack away from beneath it.      ((Dion Winters))
2019-12-07 16:02:20  ★ Dion Winters opens the front passenger door and hops in as he opens the glove box and takes
2019-12-07 16:03:17  ★ off the side clips that the glove box hangs on before using his screwdriver to take      ((Dion Winters))
2019-12-07 16:03:31  ★ off the black cover above the glove box.      ((Dion Winters))
2019-12-07 16:03:56  ★ Dion Winters uses the screwdriver to undo the screw on each corner of the ECU mounting brackets.
2019-12-07 16:04:12  ★ Dion Winters takes off the old ECU and gets the new one that came with the LS engine, putting it in place
2019-12-07 16:05:09  ★ Dion Winters reconnects the two wire connectors from the engine and such before screwing it
2019-12-07 16:05:15  ★ in place using a screwdriver      ((Dion Winters))
2019-12-07 16:05:56  ★ Dion Winters puts the plastic cover back on and secures it using the screws prior to hanging
2019-12-07 16:06:10  ★ the glove box on the clips that hold it in place.      ((Dion Winters))
2019-12-07 16:06:36  ★ Dion Winters pops the hood open by pulling on the hood release handle and jumps out as he raises up
2019-12-07 16:06:47  ★ the hood and supporting it with the hood prop rod.      ((Dion Winters))
2019-12-07 16:07:10  ★ Dion Winters twists off the oil cap and grabs a bottle of the recommended engine oil, undoing the cap
2019-12-07 16:07:21  ★ and using a funnel to poor oil into the new engine.      ((Dion Winters))
2019-12-07 16:08:10  ★ Dion Winters applies the cap back on the engine along with the bottle and shuts the hood as he
2019-12-07 16:08:17  ★ takes his vehicle out for a quick drive.      ((Dion Winters))