Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- #Uncommenting these urls would only enable
- #the power up auto injection and force injection(test case).
- #XTRA_SERVER_1=http://xtrapath1.izatcloud.net/xtra2.bin
- #XTRA_SERVER_2=http://xtrapath2.izatcloud.net/xtra2.bin
- #XTRA_SERVER_3=http://xtrapath3.izatcloud.net/xtra2.bin
- #Version check for XTRA
- #DISABLE = 0
- #AUTO = 1
- #XTRA2 = 2
- #XTRA3 = 3
- XTRA_VERSION_CHECK=0
- # Error Estimate
- # _SET = 1
- # _CLEAR = 0
- ERR_ESTIMATE=0
- #Test
- #NTP_SERVER=time.gpsonextra.net
- #Asia
- # NTP_SERVER=asia.pool.ntp.org
- #Europe
- # NTP_SERVER=europe.pool.ntp.org
- #North America
- # NTP_SERVER=north-america.pool.ntp.org
- # DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info
- # 4 - Debug, 5 - Verbose
- # If DEBUG_LEVEL is commented, Android's logging levels will be used
- DEBUG_LEVEL = 3
- # Intermediate position report, 1=enable, 0=disable
- INTERMEDIATE_POS=0
- # Below bit mask configures how GPS functionalities
- # should be locked when user turns off GPS on Settings
- # Set bit 0x1 if MO GPS functionalities are to be locked
- # Set bit 0x2 if NI GPS functionalities are to be locked
- # default - non is locked for backward compatibility
- #GPS_LOCK = 0
- # supl version 1.0
- SUPL_VER=0x10000
- # Emergency SUPL, 1=enable, 0=disable
- SUPL_ES=0
- #Choose PDN for Emergency SUPL
- #1 - Use emergency PDN
- #0 - Use regular SUPL PDN for Emergency SUPL
- USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL=1
- #SUPL_MODE is a bit mask set in config.xml per carrier by default.
- #If it is uncommented here, this value will overwrite the value from
- #config.xml.
- #MSA=0X2
- #MSB=0X1
- #SUPL_MODE=
- # GPS Capabilities bit mask
- # SCHEDULING = 0x01
- # MSB = 0x02
- # MSA = 0x04
- # ON_DEMAND_TIME = 0x10
- # GEOFENCE = 0x20
- # default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING | GEOFENCE
- CAPABILITIES=0x37
- # Accuracy threshold for intermediate positions
- # less accurate positions are ignored, 0 for passing all positions
- # ACCURACY_THRES=5000
- ################################
- ##### AGPS server settings #####
- ################################
- # FOR SUPL SUPPORT, set the following
- SUPL_HOST=supl.google.com
- SUPL_PORT=7276
- # FOR C2K PDE SUPPORT, set the following
- # C2K_HOST=c2k.pde.com or IP
- # C2K_PORT=1234
- # Bitmask of slots that are available
- # for write/install to, where 1s indicate writable,
- # and the default value is 0 where no slots
- # are writable. For example, AGPS_CERT_WRITABLE_MASK
- # of b1000001010 makes 3 slots available
- # and the remaining 7 slots unwritable.
- #AGPS_CERT_WRITABLE_MASK=0
- ####################################
- # LTE Positioning Profile Settings
- ####################################
- # 0: Enable RRLP on LTE(Default)
- # 1: Enable LPP_User_Plane on LTE
- # 2: Enable LPP_Control_Plane
- # 3: Enable both LPP_User_Plane and LPP_Control_Plane
- LPP_PROFILE = 2
- ################################
- # EXTRA SETTINGS
- ################################
- # NMEA provider (1=Modem Processor, 0=Application Processor)
- NMEA_PROVIDER=0
- # Mark if it is a SGLTE target (1=SGLTE, 0=nonSGLTE)
- SGLTE_TARGET=0
- ##################################################
- # Select Positioning Protocol on A-GLONASS system
- ##################################################
- # 0x1: RRC CPlane
- # 0x2: RRLP UPlane
- # 0x4: LLP Uplane
- A_GLONASS_POS_PROTOCOL_SELECT = 0
- # Europe NTP servers
- NTP_SERVER=0.europe.pool.ntp.org
- NTP_SERVER=1.europe.pool.ntp.org
- NTP_SERVER=2.europe.pool.ntp.org
- NTP_SERVER=3.europe.pool.ntp.org
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement