redfive

seabios-good

Feb 8th, 2018
10
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. SeaBIOS (version rel-1.11.0-11-g4a6dbce-MrChromebox-2018.02.08)
  2. BUILD: gcc: (Ubuntu 5.4.0-6ubuntu1~16.04.6) 5.4.0 20160609 binutils: (GNU Binutils for Ubuntu) 2.26.1
  3. Found coreboot cbmem console @ 7acde000
  4. Found mainboard Google Cave
  5. malloc preinit
  6. Relocating init from 0x000ed200 to 0x7aa03780 (size 30688)
  7. malloc init
  8. Found CBFS header at 0xffbfffdc
  9. Add romfile: payload (size=81944)
  10. Add romfile: pci8086,0406.rom (size=65536)
  11. Add romfile: bootorder (size=32)
  12. Add romfile: links (size=144)
  13. Add romfile: etc/boot-menu-wait (size=8)
  14. Add romfile: (size=1948952)
  15. Copying data 144@0xffa24178 to 144@0x7aa03170
  16. Add romfile: pci8086,1906.rom (size=65536)
  17. Add romfile: pci8086,1916.rom (size=65536)
  18. Add romfile: pci8086,191e.rom (size=65536)
  19. init ivt
  20. init bda
  21. Copying data 32@0xffa240f8 to 32@0x7aa031e0
  22. boot order:
  23. 1: /pci@i0cf8/*@1f,2/drive@0/disk@0
  24. init bios32
  25. init PMM
  26. init PNPBIOS table
  27. init keyboard
  28. init pic
  29. math cp init
  30. PCI probe
  31. Found 19 PCI devices (max PCI bus is 01)
  32. Relocating coreboot bios tables
  33. Copying SMBIOS entry point from 0x7aa4b000 to 0x000f49c0
  34. Copying ACPI RSDP from 0x7ab5c000 to 0x000f4990
  35. CPU Mhz=912
  36. init timer
  37. Scan for VGA option rom
  38. Copying data 65536@0xffa14088 to 65536@0x000c0000
  39. Running option rom at c000:0003
  40. Turning on vga text mode console
  41. SeaBIOS (version rel-1.11.0-11-g4a6dbce-MrChromebox-2018.02.08)
  42. init usb
  43. XHCI init on dev 00:14.0: regs @ 0xd1100000, 18 ports, 64 slots, 32 byte contexts
  44. XHCI protocol USB 2.00, 12 ports (offset 1), def 3011
  45. XHCI protocol USB 3.00, 6 ports (offset 13), def 3000
  46. XHCI extcap 0xc0 @ 0xd1108070
  47. XHCI extcap 0x1 @ 0xd110846c
  48. XHCI extcap 0xc6 @ 0xd11084f4
  49. XHCI extcap 0xc7 @ 0xd1108500
  50. XHCI extcap 0xc2 @ 0xd1108600
  51. XHCI extcap 0xa @ 0xd1108700
  52. XHCI extcap 0xc3 @ 0xd1108740
  53. XHCI extcap 0xc4 @ 0xd1108800
  54. XHCI extcap 0xc5 @ 0xd1108900
  55. /7aa01000\ Start thread
  56. |7aa01000| configure_xhci: resetting
  57. init ps2port
  58. /7aa00000\ Start thread
  59. |7aa01000| configure_xhci: setup 34 scratch pad buffers
  60. init ahci
  61. /7a9ff000\ Start thread
  62. |7a9ff000| Searching bootorder for: /pci@i0cf8/*@1e,4
  63. |7a9ff000| sdhci@0xd1137000 ver=1002 cap=546ec881 80000807
  64. /7a9fe000\ Start thread
  65. |7a9fe000| Searching bootorder for: /pci@i0cf8/*@1e,6
  66. |7a9fe000| sdhci@0xd1138000 ver=1002 cap=7568c881 807
  67. |7a9ff000| sdcard_set_frequency 200 400 fa00
  68. |7a9fe000| sdcard_set_frequency 200 400 fa00
  69. |7a9ff000| sdcard_pio command stop (code=1)
  70. |7a9ff000| sdcard_pio command stop (code=1)
  71. |7aa00000| PS2 keyboard initialized
  72. \7aa00000/ End thread
  73. /7aa00000\ Start thread
  74. /7a9fd000\ Start thread
  75. /7a9fc000\ Start thread
  76. /7a9fb000\ Start thread
  77. /7a9fa000\ Start thread
  78. /7a9f9000\ Start thread
  79. /7a9f8000\ Start thread
  80. /7a9f7000\ Start thread
  81. /7a9f6000\ Start thread
  82. /7a9f5000\ Start thread
  83. /7a9f4000\ Start thread
  84. /7a9f3000\ Start thread
  85. /7a9f2000\ Start thread
  86. /7a9f0000\ Start thread
  87. /7a9ef000\ Start thread
  88. /7a9ee000\ Start thread
  89. /7a9ed000\ Start thread
  90. /7a9ec000\ Start thread
  91. |7a9ff000| sdcard_set_frequency 200 25000 400
  92. |7a9ff000| Found sdcard at 0xd1137000: MMC drive DF4064 59640MiB
  93. |7a9ff000| Registering bootable: MMC drive DF4064 59640MiB (type:2 prio:103 data:f4960)
  94. \7a9ff000/ End thread
  95. |7a9f2000| XHCI port #13: 0x00201203, powered, enabled, pls 0, speed 4 [Super]
  96. |7a9f2000| set_address 0x7aa4afb0
  97. |7a9f2000| xhci_alloc_pipe: usbdev 0x7aa02050, ring 0x7aa4a700, slotid 0, epid 1
  98. |7a9f2000| xhci_cmd_enable_slot:
  99. |7a9f2000| xhci_process_events port #1: 0x000206e1, powered, pls 7, speed 1 [Full]
  100. |7a9f2000| xhci_process_events port #3: 0x000206e1, powered, pls 7, speed 1 [Full]
  101. |7a9f2000| xhci_process_events port #7: 0x000206e1, powered, pls 7, speed 1 [Full]
  102. |7a9f2000| xhci_process_events port #13: 0x00201203, powered, enabled, pls 0, speed 4 [Super]
  103. |7a9f2000| xhci_alloc_pipe: enable slot: got slotid 1
  104. |7a9f2000| xhci_cmd_address_device: slotid 1
  105. \7a9fd000/ End thread
  106. \7a9fb000/ End thread
  107. \7a9fa000/ End thread
  108. \7a9f9000/ End thread
  109. \7a9f7000/ End thread
  110. \7a9f6000/ End thread
  111. \7a9f5000/ End thread
  112. \7a9f4000/ End thread
  113. \7a9f3000/ End thread
  114. \7a9f0000/ End thread
  115. \7a9ef000/ End thread
  116. \7a9ee000/ End thread
  117. \7a9ed000/ End thread
  118. \7a9ec000/ End thread
  119. |7a9f2000| xhci_realloc_pipe: usbdev 0x7aa02050, ring 0x7aa4a700, slotid 1, epid 1
  120. |7a9f2000| config_usb: 0x7aa4a820
  121. |7a9f8000| xhci_hub_reset port #7: 0x000006e1, powered, pls 7, speed 1 [Full]
  122. |7a9fe000| sdcard_set_frequency 200 25000 400
  123. |7a9fe000| Found sdcard at 0xd1138000: SD card SD1GB 972MiB
  124. |7a9fe000| Registering bootable: SD card SD1GB 972MiB (type:2 prio:103 data:f4930)
  125. \7a9fe000/ End thread
  126. |7a9f2000| device rev=0300 cls=09 sub=00 proto=03 size=512
  127. |7a9f2000| xhci_realloc_pipe: usbdev 0x7aa02050, ring 0x7aa4a700, slotid 1, epid 1
  128. |7a9f8000| XHCI port #7: 0x00200e03, powered, enabled, pls 0, speed 3 [High]
  129. |7a9f8000| set_address 0x7aa4afb0
  130. |7a9f8000| xhci_alloc_pipe: usbdev 0x7aa02350, ring 0x7aa4a500, slotid 0, epid 1
  131. |7a9f8000| xhci_cmd_enable_slot:
  132. |7a9f8000| xhci_process_events port #7: 0x00200e03, powered, enabled, pls 0, speed 3 [High]
  133. |7a9f8000| xhci_alloc_pipe: enable slot: got slotid 2
  134. |7a9f8000| xhci_cmd_address_device: slotid 2
  135. |7a9f8000| xhci_realloc_pipe: usbdev 0x7aa02350, ring 0x7aa4a500, slotid 2, epid 1
  136. |7a9f8000| config_usb: 0x7aa4a620
  137. |7a9fc000| xhci_hub_reset port #3: 0x000006e1, powered, pls 7, speed 1 [Full]
  138. |7a9f8000| device rev=0200 cls=ef sub=02 proto=01 size=64
  139. |7a9f8000| xhci_realloc_pipe: usbdev 0x7aa02350, ring 0x7aa4a500, slotid 2, epid 1
  140. |7a9f8000| usb_hid_setup 0x7aa4a620
  141. \7a9f8000/ End thread
  142. |7a9fc000| XHCI port #3: 0x00200603, powered, enabled, pls 0, speed 1 [Full]
  143. |7a9fc000| set_address 0x7aa4afb0
  144. |7a9fc000| xhci_alloc_pipe: usbdev 0x7aa02550, ring 0x7aa27a00, slotid 0, epid 1
  145. |7a9fc000| xhci_cmd_enable_slot:
  146. |7a9fc000| xhci_process_events port #3: 0x00200603, powered, enabled, pls 0, speed 1 [Full]
  147. |7a9fc000| xhci_alloc_pipe: enable slot: got slotid 3
  148. |7a9fc000| xhci_cmd_address_device: slotid 3
  149. |7a9fc000| xhci_realloc_pipe: usbdev 0x7aa02550, ring 0x7aa27a00, slotid 3, epid 1
  150. |7a9fc000| config_usb: 0x7aa27b20
  151. |7aa00000| xhci_hub_reset port #1: 0x000006e1, powered, pls 7, speed 1 [Full]
  152. |7a9fc000| device rev=0200 cls=e0 sub=01 proto=01 size=64
  153. |7a9fc000| xhci_realloc_pipe: usbdev 0x7aa02550, ring 0x7aa27a00, slotid 3, epid 1
  154. |7a9fc000| xhci_realloc_pipe: reconf ctl endpoint pkt size: 8 -> 64
  155. |7a9fc000| xhci_cmd_evaluate_context: slotid 3, add 0x2, del 0x0
  156. \7a9fc000/ End thread
  157. |7aa00000| XHCI port #1: 0x00200e03, powered, enabled, pls 0, speed 3 [High]
  158. |7aa00000| set_address 0x7aa4afb0
  159. |7aa00000| xhci_alloc_pipe: usbdev 0x7aa02780, ring 0x7aa27800, slotid 0, epid 1
  160. |7aa00000| xhci_cmd_enable_slot:
  161. |7aa00000| xhci_process_events port #1: 0x00200e03, powered, enabled, pls 0, speed 3 [High]
  162. |7aa00000| xhci_alloc_pipe: enable slot: got slotid 4
  163. |7aa00000| xhci_cmd_address_device: slotid 4
  164. |7aa00000| xhci_realloc_pipe: usbdev 0x7aa02780, ring 0x7aa27800, slotid 4, epid 1
  165. |7aa00000| config_usb: 0x7aa27920
  166. |7aa00000| device rev=0210 cls=09 sub=00 proto=01 size=64
  167. |7aa00000| xhci_realloc_pipe: usbdev 0x7aa02780, ring 0x7aa27800, slotid 4, epid 1
  168. /7a9fe000\ Start thread
  169. /7a9fd000\ Start thread
  170. /7a9fc000\ Start thread
  171. /7a9fb000\ Start thread
  172. |7a9fe000| set_address 0x7aa4afb0
  173. |7a9fe000| xhci_alloc_pipe: usbdev 0x7aa02360, ring 0x7aa26e00, slotid 0, epid 1
  174. |7a9fe000| xhci_cmd_configure_endpoint: slotid 1, add 0x1, del 0x0
  175. |7a9fe000| xhci_cmd_enable_slot:
  176. |7a9fe000| xhci_alloc_pipe: enable slot: got slotid 5
  177. |7a9fe000| xhci_cmd_address_device: slotid 5
  178. |7a9fe000| xhci_realloc_pipe: usbdev 0x7aa02360, ring 0x7aa26e00, slotid 5, epid 1
  179. |7a9fe000| config_usb: 0x7aa26f20
  180. |7a9fe000| device rev=0300 cls=00 sub=00 proto=00 size=512
  181. |7a9fe000| xhci_realloc_pipe: usbdev 0x7aa02360, ring 0x7aa26e00, slotid 5, epid 1
  182. |7a9fd000| set_address 0x7aa4afb0
  183. |7a9fe000| xhci_send_pipe: xfer failed (cc 6)
  184. |7a9fe000| Failure on hub port 0 disconnect
  185. \7a9fe000/ End thread
  186. |7a9fd000| xhci_alloc_pipe: usbdev 0x7aa022e0, ring 0x7aa26c00, slotid 0, epid 1
  187. |7a9fd000| xhci_cmd_configure_endpoint: slotid 1, add 0x1, del 0x0
  188. |7a9fd000| xhci_cmd_enable_slot:
  189. |7a9fd000| xhci_alloc_pipe: enable slot: got slotid 6
  190. |7a9fd000| xhci_cmd_address_device: slotid 6
  191. |7a9fd000| xhci_realloc_pipe: usbdev 0x7aa022e0, ring 0x7aa26c00, slotid 6, epid 1
  192. |7a9fd000| config_usb: 0x7aa26d20
  193. |7a9fd000| device rev=0300 cls=00 sub=00 proto=00 size=512
  194. |7a9fd000| xhci_realloc_pipe: usbdev 0x7aa022e0, ring 0x7aa26c00, slotid 6, epid 1
  195. |7a9fd000| xhci_alloc_pipe: usbdev 0x7aa022e0, ring 0x000ef600, slotid 0, epid 5
  196. |7a9fd000| xhci_cmd_configure_endpoint: slotid 6, add 0x21, del 0x0
  197. |7a9fd000| xhci_alloc_pipe: usbdev 0x7aa022e0, ring 0x000ef400, slotid 0, epid 2
  198. |7a9fd000| xhci_cmd_configure_endpoint: slotid 6, add 0x5, del 0x0
  199. |7a9fd000| Searching bootorder for: /pci@i0cf8/usb@14/hub@1/storage@2/*@0/*@0,0
  200. |7a9fd000| Searching bootorder for: /pci@i0cf8/usb@14/hub@1/usb-*@2
  201. |7a9fd000| USB MSC vendor='Generic-' product='SD/MMC' rev='1.00' type=0 removable=1
  202. |7a9fd000| Device reports MEDIUM NOT PRESENT
  203. |7a9fd000| scsi_is_ready returned -1
  204. |7a9fd000| Unable to configure USB MSC drive.
  205. |7a9fd000| Searching bootorder for: /pci@i0cf8/usb@14/hub@1/storage@2/*@0/*@0,1
  206. |7a9fd000| Searching bootorder for: /pci@i0cf8/usb@14/hub@1/usb-*@2
  207. |7a9fd000| USB MSC vendor='Generic-' product='Micro SD/M2' rev='1.08' type=0 removable=1
  208. /7a9fe000\ Start thread
  209. /7a9fa000\ Start thread
  210. /7a9f9000\ Start thread
  211. /7a9f8000\ Start thread
  212. |7a9f8000| set_address 0x7aa4afb0
  213. |7a9f8000| xhci_alloc_pipe: usbdev 0x7a9ffe30, ring 0x7aa26200, slotid 0, epid 1
  214. |7a9f8000| xhci_cmd_configure_endpoint: slotid 4, add 0x1, del 0x0
  215. |7a9f8000| xhci_cmd_enable_slot:
  216. |7a9f8000| xhci_alloc_pipe: enable slot: got slotid 7
  217. |7a9f8000| xhci_cmd_address_device: slotid 7
  218. |7a9f8000| xhci_realloc_pipe: usbdev 0x7a9ffe30, ring 0x7aa26200, slotid 7, epid 1
  219. |7a9f8000| config_usb: 0x7aa26320
  220. |7a9f8000| device rev=0200 cls=09 sub=00 proto=01 size=64
  221. |7a9f8000| xhci_realloc_pipe: usbdev 0x7a9ffe30, ring 0x7aa26200, slotid 7, epid 1
  222. \7a9f9000/ End thread
  223. \7a9fa000/ End thread
  224. \7a9fe000/ End thread
  225. /7a9fe000\ Start thread
  226. /7a9fa000\ Start thread
  227. /7a9f9000\ Start thread
  228. /7a9f7000\ Start thread
  229. |7a9fa000| set_address 0x7aa4afb0
  230. |7a9fa000| xhci_alloc_pipe: usbdev 0x7aa02070, ring 0x7aa26000, slotid 0, epid 1
  231. |7a9fa000| xhci_cmd_configure_endpoint: slotid 7, add 0x1, del 0x0
  232. |7a9fa000| xhci_cmd_enable_slot:
  233. |7a9fa000| xhci_alloc_pipe: enable slot: got slotid 8
  234. |7a9fa000| xhci_cmd_address_device: slotid 8
  235. |7a9fa000| xhci_realloc_pipe: usbdev 0x7aa02070, ring 0x7aa26000, slotid 8, epid 1
  236. |7a9fa000| config_usb: 0x7aa26120
  237. |7a9fa000| device rev=0201 cls=11 sub=00 proto=00 size=64
  238. |7a9fa000| xhci_realloc_pipe: usbdev 0x7aa02070, ring 0x7aa26000, slotid 8, epid 1
  239. \7a9fa000/ End thread
  240. \7a9fe000/ End thread
  241. \7a9f9000/ End thread
  242. \7a9f7000/ End thread
  243. |7a9f8000| Initialized USB HUB (0 ports used)
  244. \7a9f8000/ End thread
  245. |7aa00000| Initialized USB HUB (0 ports used)
  246. \7aa00000/ End thread
  247. |7a9fd000| USB MSC blksize=512 sectors=124735488
  248. |7a9fd000| Registering bootable: USB MSC Drive Generic- Micro SD/M2 1.08 (type:2 prio:103 data:f4900)
  249. \7a9fd000/ End thread
  250. |7a9fb000| WARNING - Timeout at xhci_event_wait:740!
  251. |7a9fb000| xhci_send_pipe: xfer failed (cc -1)
  252. |7a9fb000| Failure on hub port 3 detect
  253. \7a9fb000/ End thread
  254. |7a9fc000| WARNING - Timeout at xhci_event_wait:740!
  255. |7a9fc000| xhci_send_pipe: xfer failed (cc -1)
  256. |7a9fc000| Failure on hub port 2 detect
  257. \7a9fc000/ End thread
  258. |7a9f2000| Initialized USB HUB (1 ports used)
  259. \7a9f2000/ End thread
  260. \7aa01000/ End thread
  261. All threads complete.
  262. Scan for option roms
  263.  
  264. Press ESC for boot menu.
  265.  
  266. Copying data 8@0xffa24278 to 8@0x00006f1c
  267. Select boot device:
  268.  
  269. 1. USB MSC Drive Generic- Micro SD/M2 1.08
  270. 2. MMC drive DF4064 59640MiB
  271. 3. SD card SD1GB 972MiB
  272.  
  273. Searching bootorder for: HALT
  274. Mapping hd drive 0x000f4900 to 0
  275. drive 0x000f4900: PCHS=0/0/0 translation=lba LCHS=1024/255/63 s=124735488
  276. Mapping hd drive 0x000f4960 to 1
  277. drive 0x000f4960: PCHS=0/0/0 translation=lba LCHS=1024/255/63 s=122142720
  278. Mapping hd drive 0x000f4930 to 2
  279. drive 0x000f4930: PCHS=0/0/0 translation=lba LCHS=987/32/63 s=1990656
  280. finalize PMM
  281. malloc finalize
  282. Space available for UMB: d0000-ef000, f0000-f4900
  283. Returned 106496 bytes of ZoneHigh
  284. e820 map has 8 items:
  285. 0: 0000000000000000 - 000000000009fc00 = 1 RAM
  286. 1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED
  287. 2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
  288. 3: 0000000000100000 - 000000007aa25000 = 1 RAM
  289. 4: 000000007aa25000 - 0000000080000000 = 2 RESERVED
  290. 5: 00000000e0000000 - 00000000f0000000 = 2 RESERVED
  291. 6: 00000000fd000000 - 0000000100000000 = 2 RESERVED
  292. 7: 0000000100000000 - 000000017f000000 = 1 RAM
  293. Jump to int19
  294. enter handle_19:
  295. NULL
  296. Booting from Hard Disk...
  297. Booting from 0000:7c00
RAW Paste Data