PrusaSlicer Artillery Sidewinder X1 Printer Profiles

[printer:*SWX1 Baseline (20210408)*]
thumbnails = 16x16,220x124
bed_custom_model = ./Support/Artillery Sidewinder X1/Artillery_Sidewinder_X1_Bed.stl
bed_custom_texture = ./Support/Artillery Sidewinder X1/Artillery Sidewinder X1 Bed Image v6.png
bed_shape = 0x0,300x0,300x300,0x300
before_layer_gcode =
between_objects_gcode =
cooling_tube_length = 5
cooling_tube_retraction = 91.5
default_filament_profile = "Generic PLA - Detached"
default_print_profile = "SWX1 SPEED 0.20mm layers for 0.25mm+ nozzle"
deretract_speed = 25
end_gcode = ; PrusaSlicer end gcode for Artillery Sidewinder X1\n; Last updated 20210408\n; Print complete\nM300 S60 P10 ; chirp\nM117 Printing complete\nG4 ; wait\nG92 E0 ; prepare to retract\nG1 E-1.8 F3000; retract to avoid stringing\n; Anti-stringing end wiggle\nG91 ; use relative coordinates\nG1 X-0.5 Y-0.5 F1200\nG1 X1 Y1 F1200\n; Raise nozzle and present bed\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+120, max_print_height)}{endif} ; Move print head up\nG90 ; use absolute coordinates\n; Reset print setting overrides\nM200 D0 ; disable volumetric e\nM220 S100 ; reset speed factor to 100%\nM221 S100 ; reset extrusion rate to 100%\nM900 K0 ; reset linear acceleration\n; Present bed for final cleaning\nG0 X155 Y310 F12000 ; Present print\n; Shut down printer\nM106 S0 ; turn-off fan\nM104 S0 ; turn-off hotend\nM140 S0 ; turn-off bed\nM150 P0 ; turn off led\nM85 S0; deactivate idle timeout\nM84\n
extra_loading_move = -2
extruder_colour = #108080
extruder_offset = 0x0
gcode_flavor = marlin
high_current_on_filament_swap = 0
host_type = octoprint
inherits =
layer_gcode =
machine_max_acceleration_e = 5000,5000
machine_max_acceleration_extruding = 1000,1250
machine_max_acceleration_retracting = 1000,1250
machine_max_acceleration_x = 800,1000
machine_max_acceleration_y = 800,1000
machine_max_acceleration_z = 500,200
machine_max_feedrate_e = 40,120
machine_max_feedrate_x = 200,200
machine_max_feedrate_y = 200,200
machine_max_feedrate_z = 15,12
machine_max_jerk_e = 6,2.5
machine_max_jerk_x = 10,10
machine_max_jerk_y = 10,10
machine_max_jerk_z = 0.25,0.4
machine_min_extruding_rate = 0,0
machine_min_travel_rate = 0,0
max_layer_height = 0.32
max_print_height = 400
min_layer_height = 0.15
nozzle_diameter = 0.4
parking_pos_retraction = 92
printer_model = SWX1
printer_notes =
printer_settings_id = *SWX1 Baseline*
printer_technology = FFF
printer_variant = 0.4
printer_vendor = Artillery
remaining_times = 1
retract_before_travel = 2
retract_before_wipe = 20%
retract_layer_change = 1
retract_length = 1.7
retract_length_toolchange = 10
retract_lift = 0.4
retract_lift_above = 0
retract_lift_below = 399
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 40
serial_port =
serial_speed = 250000
silent_mode = 0
single_extruder_multi_material = 0
start_gcode = ; PrusaSlicer start gcode for Artillery Sidewinder x1\n; Last updated 20210304\nM300 S60 P10 ; chirp\nM117 Initializing\n; Set coordinate modes\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\n; Reset speed and extrusion rates\nM200 D0 ; disable volumetric e\nM220 S100 ; reset speed\n; Set print temps\nM117 Heating nozzle & bed\nM104 S160 ; set no-ooze nozzle temp while bed heats\nM140 S[first_layer_bed_temperature] ; set heatbed temperature\nM109 S160 ; wait until nozzle is warm to avoid bed damage\n; Home\nM300 S60 P10 ; chirp\nG1 Z3 F3000 ; move z up little to prevent scratching of surface\nM117 Homing\nG28 ; home all axes\n; Present bed for final cleaning\nM300 S60 P10 ; chirp\nG1 Z3 F3000 ; move z up little to prevent scratching of surface\nG0 X155 Y310 F7200 ; Present bed for cleaning\n; Wait for final bed heating\nM190 S[first_layer_bed_temperature] ; wait for the bed to heat up\n; Return to prime position and wait for nozzle to heat up\nM300 S60 P10 ; chirp\nG1 Z3 F3000 ; move z up little to prevent scratching of surface\nG1 X0 Y-2 F7200.0 ; go outside print area\nM104 S[first_layer_temperature] ; set final nozzle print temp \nM109 S[first_layer_temperature] ; wait for the nozzle to heat up\n; Prime line routine\nM300 S60 P10 ; chirp\nM117 Printing prime line\nM900 K0; Disable Linear Advance for prime line\nG92 E0.0 ; reset extrusion distance\nG1 Z0.2 F3000 ; lower nozzle to printing height\nG1 E5 F1000 ; de-retract and push filament to trap ooze\nG1 X0 Y-3 F7200 ; move to prime line position\nG1 X20.0 E10 F7200.0 ; fat 20mm intro line @ 0.5\nG1 X60.0 E3.2  F3600.0 ; thin +40mm intro line @ 0.08\nG1 X100.0 E6  F3600.0 ; fat +40mm intro line @ 0.15\nG1 E-0.8 F3000; retract to avoid stringing\nG1 X99.5 E0 F3600.0 ; -0.5mm wipe action to avoid string\nG1 X110.0 E0 F3600.0 ; +10mm intro line @ 0.00\nG1 E0.7 F1500; de-retract\nG92 E0.0 ; reset extrusion distance\n; Final print adjustments\nM300 S60 P10 ; chirp\nM117 Preparing to print\n; Adjust extrusion rate if desired\n;M221 S{if layer_height >= 0.1}90{else}100{endif} ; compensate for thick layer heights\nM92 E441.664 ; compensate for extrusion error\n;M85 S300 ; activate 300-second idle timeout\n; Adjust PID values\n;M301 P14.93 I1.27 D43.27\n;M304 P88.75 I11.17 D176.30\nM420 S1 Z3 ; reload and fade mesh bed leveling at 3mm\nM117 Print in progress
toolchange_gcode =
use_firmware_retraction = 0
use_relative_e_distances = 1
use_volumetric_e = 0
variable_layer_height = 1
wipe = 0
z_offset = 0

[printer:SWX1 1.20mm nozzle (20210408)]
inherits = *SWX1 Baseline (20210408)*
max_layer_height = 0.96
min_layer_height = 0.30
nozzle_diameter = 1.2
printer_settings_id = SWX1 1.20mm nozzle
printer_variant = 1.2

[printer:SWX1 1.00mm nozzle (20210408)]
inherits = *SWX1 Baseline (20210408)*
max_layer_height = 0.80
min_layer_height = 0.25
nozzle_diameter = 1
printer_settings_id = SWX1 1.00mm nozzle
printer_variant = 1.0

[printer:SWX1 0.80mm nozzle (20210408)]
inherits = *SWX1 Baseline (20210408)*
max_layer_height = 0.64
min_layer_height = 0.2
nozzle_diameter = 0.8
printer_settings_id = SWX1 0.80mm nozzle
printer_variant = 0.8

[printer:SWX1 0.60mm nozzle (20210408)]
inherits = *SWX1 Baseline (20210408)*
max_layer_height = 0.48
min_layer_height = 0.15
nozzle_diameter = 0.6
printer_settings_id = SWX1 0.60mm nozzle
printer_variant = 0.6

[printer:SWX1 0.40mm nozzle (20210408)]
inherits = *SWX1 Baseline (20210408)*
max_layer_height = 0.32
min_layer_height = 0.1
nozzle_diameter = 0.4
printer_settings_id = SWX1 0.40mm nozzle
printer_variant = 0.4

[printer:SWX1 0.30mm nozzle (20210408)]
inherits = *SWX1 Baseline (20210408)*
max_layer_height = 0.24
min_layer_height = 0.075
nozzle_diameter = 0.3
printer_settings_id = SWX1 0.30mm nozzle
printer_variant = 0.3

[printer:SWX1 0.25mm nozzle (20210408)]
inherits = *SWX1 Baseline (20210408)*
max_layer_height = 0.20
min_layer_height = 0.062
nozzle_diameter = 0.25
printer_settings_id = SWX1 0.25mm nozzle
printer_variant = 0.25

[physical_printer:Artillery Sidewinder X1]
host_type = octoprint
preset_name = SWX1 0.25mm nozzle (20210408);SWX1 0.30mm nozzle (20210408);SWX1 0.40mm nozzle (20210408);SWX1 0.60mm nozzle (20210408);SWX1 0.80mm nozzle (20210408);SWX1 1.00mm nozzle (20210408);SWX1 1.20mm nozzle (20210408)
print_host = swx1.ttlexceeded.com
printer_technology = FFF
printhost_apikey = [redacted]
printhost_authorization_type = key
printhost_cafile =
printhost_password =
printhost_port =
printhost_user =

[presets]
printer = SWX1 0.60mm nozzle (20210408)