New brlcad build after changing cmake instructions

abhinav@samsung-galaxy:~/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad$ mkdir build
abhinav@samsung-galaxy:~/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad$ cd build
abhinav@samsung-galaxy:~/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build$ cmake .. -DBRLCAD_ENABLE_STRICT=NO -DBRLCAD_BUNDLED_LIBS=ON -DCMAKE_BUILD_TYPE=Release -DBRLCAD_ENABLE_STRICT=OFF
-- The C compiler identification is GNU 14.2.1
-- The CXX compiler identification is GNU 14.2.1
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/lib64/ccache/cc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Check for working CXX compiler: /usr/lib64/ccache/c++ - skipped
-- Detecting CXX compile features
-- Detecting CXX compile features - done
CMAKE_SOURCE_DIR: /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad
CMAKE_BINARY_DIR: /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build
-- CMake version: 3.30.8
-- Looking for sys/types.h
-- Looking for sys/types.h - found
-- Looking for stdint.h
-- Looking for stdint.h - found
-- Looking for stddef.h
-- Looking for stddef.h - found
-- Check size of void *
-- Check size of void * - done
CMake Warning at misc/CMake/BRLCAD_EXT_Setup.cmake:79 (message):
  External dependencies will be downloaded, configured, and built
  automatically as-needed.  Set BRLCAD_EXT_DIR to specify instead.
Call Stack (most recent call first):
  CMakeLists.txt:213 (brlcad_bext_init)


-- BRLCAD_EXT_DIR specifies prebuilt external dependencies directory
containing 'install' and 'noinstall' folders, outputs from installing
https://github.com/BRL-CAD/bext.

**********************************************************
*** Configuring BRL-CAD Release 7.40.3, Build 20250330 ***
**********************************************************
-- Performing Test WORKING__D_POSIX_C_SOURCE_200809L
-- Performing Test WORKING__D_POSIX_C_SOURCE_200809L - Success
-- Performing Test WORKING__D_XOPEN_SOURCE_700
-- Performing Test WORKING__D_XOPEN_SOURCE_700 - Success
***********************************************************
*        Stage 1 of 9 - Top Level Configure Options       *
***********************************************************
-- Found X11: /usr/include
-- Looking for XOpenDisplay in /usr/lib64/libX11.so;/usr/lib64/libXext.so
-- Looking for XOpenDisplay in /usr/lib64/libX11.so;/usr/lib64/libXext.so - found
-- Looking for gethostbyname
-- Looking for gethostbyname - found
-- Looking for connect
-- Looking for connect - found
-- Looking for remove
-- Looking for remove - found
-- Looking for shmat
-- Looking for shmat - found
-- Looking for IceConnectionNumber in ICE
-- Looking for IceConnectionNumber in ICE - found
-- Found OpenGL: /usr/lib64/libOpenGL.so
***********************************************************
*             Stage 2 of 9 - Check for Programs           *
***********************************************************
-- Found SHELL_SUPPORTED: /usr/bin/sh
-- Found SWIG: /usr/bin/swig (found version "4.2.1")
-- Found Doxygen: /usr/bin/doxygen (found version "1.10.0") found components: doxygen dot
***********************************************************
*     Stage 3 of 9 - Check for Compiler Characteristics   *
***********************************************************
-- Performing Test PIPE_C_FLAG_FOUND
-- Performing Test PIPE_C_FLAG_FOUND - Success
-- Performing Test PIPE_CXX_FLAG_FOUND
-- Performing Test PIPE_CXX_FLAG_FOUND - Success
-- Performing Test FVISIBILITY_HIDDEN_C_FLAG_FOUND
-- Performing Test FVISIBILITY_HIDDEN_C_FLAG_FOUND - Success
-- Performing Test FVISIBILITY_HIDDEN_CXX_FLAG_FOUND
-- Performing Test FVISIBILITY_HIDDEN_CXX_FLAG_FOUND - Success
-- Performing Test FNO_STRICT_ALIASING_C_FLAG_FOUND
-- Performing Test FNO_STRICT_ALIASING_C_FLAG_FOUND - Success
-- Performing Test FNO_STRICT_ALIASING_CXX_FLAG_FOUND
-- Performing Test FNO_STRICT_ALIASING_CXX_FLAG_FOUND - Success
-- Performing Test FNO_COMMON_C_FLAG_FOUND
-- Performing Test FNO_COMMON_C_FLAG_FOUND - Success
-- Performing Test FNO_COMMON_CXX_FLAG_FOUND
-- Performing Test FNO_COMMON_CXX_FLAG_FOUND - Success
-- Performing Test FEXCEPTIONS_C_FLAG_FOUND
-- Performing Test FEXCEPTIONS_C_FLAG_FOUND - Success
-- Performing Test FEXCEPTIONS_CXX_FLAG_FOUND
-- Performing Test FEXCEPTIONS_CXX_FLAG_FOUND - Success
-- Performing Test FTEMPLATE_DEPTH_128_CXX_FLAG_FOUND
-- Performing Test FTEMPLATE_DEPTH_128_CXX_FLAG_FOUND - Success
-- Performing Test M64_C_FLAG_FOUND
-- Performing Test M64_C_FLAG_FOUND - Success
-- Performing Test G_C_FLAG_FOUND
-- Performing Test G_C_FLAG_FOUND - Success
-- Performing Test G_CXX_FLAG_FOUND
-- Performing Test G_CXX_FLAG_FOUND - Success
-- Performing Test GGDB3_C_FLAG_FOUND
-- Performing Test GGDB3_C_FLAG_FOUND - Success
-- Performing Test GGDB3_CXX_FLAG_FOUND
-- Performing Test GGDB3_CXX_FLAG_FOUND - Success
-- Performing Test HAVE_INLINE_KEYWORD
-- Performing Test HAVE_INLINE_KEYWORD - Success
-- Performing Test WERROR_C_FLAG_FOUND
-- Performing Test WERROR_C_FLAG_FOUND - Success
-- Performing Test HAVE_PRINTF12_ATTRIBUTE
-- Performing Test HAVE_PRINTF12_ATTRIBUTE - Success
-- Performing Test HAVE_PRINTF23_ATTRIBUTE
-- Performing Test HAVE_PRINTF23_ATTRIBUTE - Success
-- Performing Test HAVE_SCANF23_ATTRIBUTE
-- Performing Test HAVE_SCANF23_ATTRIBUTE - Success
-- Performing Test HAVE_DEPRECATED_ATTRIBUTE
-- Performing Test HAVE_DEPRECATED_ATTRIBUTE - Success
-- Performing Test HAVE_DEPRECATED_DECLSPEC
-- Performing Test HAVE_DEPRECATED_DECLSPEC - Failed
-- Performing Test HAVE_NORETURN_ATTRIBUTE
-- Performing Test HAVE_NORETURN_ATTRIBUTE - Success
-- Performing Test HAVE_NORETURN_DECLSPEC
-- Performing Test HAVE_NORETURN_DECLSPEC - Failed
-- Performing Test HAVE_ANALYZER_NORETURN_ATTRIBUTE
-- Performing Test HAVE_ANALYZER_NORETURN_ATTRIBUTE - Failed
-- Performing Test HAVE_ALWAYS_INLINE_ATTRIBUTE
-- Performing Test HAVE_ALWAYS_INLINE_ATTRIBUTE - Success
-- Performing Test HAVE_FORCEINLINE
-- Performing Test HAVE_FORCEINLINE - Failed
-- Performing Test HAVE_CONST_ATTRIBUTE
-- Performing Test HAVE_CONST_ATTRIBUTE - Failed
-- Performing Test HAVE_PURE_ATTRIBUTE
-- Performing Test HAVE_PURE_ATTRIBUTE - Failed
-- Performing Test HAVE_COLD_ATTRIBUTE
-- Performing Test HAVE_COLD_ATTRIBUTE - Success
-- Performing Test HAVE_HOT_ATTRIBUTE
-- Performing Test HAVE_HOT_ATTRIBUTE - Success
-- Performing Test HAVE_NONNULL_ATTRIBUTE
-- Performing Test HAVE_NONNULL_ATTRIBUTE - Success
-- Performing Test HAVE_WARN_UNUSED_RESULT_ATTRIBUTE
-- Performing Test HAVE_WARN_UNUSED_RESULT_ATTRIBUTE - Success
-- Performing Test HAVE_FLATTEN_ATTRIBUTE
-- Performing Test HAVE_FLATTEN_ATTRIBUTE - Success
-- Performing Test QUNUSED_ARGUMENTS_C_FLAG_FOUND
-- Performing Test QUNUSED_ARGUMENTS_C_FLAG_FOUND - Failed
-- Performing Test QUNUSED_ARGUMENTS_CXX_FLAG_FOUND
-- Performing Test QUNUSED_ARGUMENTS_CXX_FLAG_FOUND - Failed
-- Looking for include file pthread.h
-- Looking for include file pthread.h - found
-- Performing Test O3_C_FLAG_FOUND
-- Performing Test O3_C_FLAG_FOUND - Success
-- Performing Test O3_CXX_FLAG_FOUND
-- Performing Test O3_CXX_FLAG_FOUND - Success
-- Performing Test FIPA_PTA_C_FLAG_FOUND
-- Performing Test FIPA_PTA_C_FLAG_FOUND - Success
-- Performing Test FIPA_PTA_CXX_FLAG_FOUND
-- Performing Test FIPA_PTA_CXX_FLAG_FOUND - Success
-- Performing Test FSTRENGTH_REDUCE_C_FLAG_FOUND
-- Performing Test FSTRENGTH_REDUCE_C_FLAG_FOUND - Success
-- Performing Test FSTRENGTH_REDUCE_CXX_FLAG_FOUND
-- Performing Test FSTRENGTH_REDUCE_CXX_FLAG_FOUND - Success
-- Performing Test FEXPENSIVE_OPTIMIZATIONS_C_FLAG_FOUND
-- Performing Test FEXPENSIVE_OPTIMIZATIONS_C_FLAG_FOUND - Success
-- Performing Test FEXPENSIVE_OPTIMIZATIONS_CXX_FLAG_FOUND
-- Performing Test FEXPENSIVE_OPTIMIZATIONS_CXX_FLAG_FOUND - Success
-- Performing Test FINLINE_FUNCTIONS_C_FLAG_FOUND
-- Performing Test FINLINE_FUNCTIONS_C_FLAG_FOUND - Success
-- Performing Test FINLINE_FUNCTIONS_CXX_FLAG_FOUND
-- Performing Test FINLINE_FUNCTIONS_CXX_FLAG_FOUND - Success
-- Performing Test FLTO_AUTO_C_FLAG_FOUND
-- Performing Test FLTO_AUTO_C_FLAG_FOUND - Success
-- Performing Test FLTO_AUTO_CXX_FLAG_FOUND
-- Performing Test FLTO_AUTO_CXX_FLAG_FOUND - Success
-- Performing Test FNO_OMIT_FRAME_POINTER_C_FLAG_FOUND
-- Performing Test FNO_OMIT_FRAME_POINTER_C_FLAG_FOUND - Success
-- Performing Test FNO_OMIT_FRAME_POINTER_CXX_FLAG_FOUND
-- Performing Test FNO_OMIT_FRAME_POINTER_CXX_FLAG_FOUND - Success
-- Performing Test PEDANTIC_C_FLAG_FOUND
-- Performing Test PEDANTIC_C_FLAG_FOUND - Success
-- Performing Test PEDANTIC_CXX_FLAG_FOUND
-- Performing Test PEDANTIC_CXX_FLAG_FOUND - Success
-- Performing Test WALL_C_FLAG_FOUND
-- Performing Test WALL_C_FLAG_FOUND - Success
-- Performing Test WALL_CXX_FLAG_FOUND
-- Performing Test WALL_CXX_FLAG_FOUND - Success
-- Performing Test WEXTRA_C_FLAG_FOUND
-- Performing Test WEXTRA_C_FLAG_FOUND - Success
-- Performing Test WEXTRA_CXX_FLAG_FOUND
-- Performing Test WEXTRA_CXX_FLAG_FOUND - Success
-- Performing Test WUNDEF_C_FLAG_FOUND
-- Performing Test WUNDEF_C_FLAG_FOUND - Success
-- Performing Test WUNDEF_CXX_FLAG_FOUND
-- Performing Test WUNDEF_CXX_FLAG_FOUND - Success
-- Performing Test WFLOAT_EQUAL_C_FLAG_FOUND
-- Performing Test WFLOAT_EQUAL_C_FLAG_FOUND - Success
-- Performing Test WFLOAT_EQUAL_CXX_FLAG_FOUND
-- Performing Test WFLOAT_EQUAL_CXX_FLAG_FOUND - Success
-- Performing Test WSHADOW_C_FLAG_FOUND
-- Performing Test WSHADOW_C_FLAG_FOUND - Success
-- Performing Test WSHADOW_CXX_FLAG_FOUND
-- Performing Test WSHADOW_CXX_FLAG_FOUND - Success
-- Performing Test WBAD_FUNCTION_CAST_C_FLAG_FOUND
-- Performing Test WBAD_FUNCTION_CAST_C_FLAG_FOUND - Success
-- Performing Test WBAD_FUNCTION_CAST_CXX_FLAG_FOUND
-- Performing Test WBAD_FUNCTION_CAST_CXX_FLAG_FOUND - Failed
-- Performing Test WC___COMPAT_C_FLAG_FOUND
-- Performing Test WC___COMPAT_C_FLAG_FOUND - Success
-- Performing Test WINLINE_C_FLAG_FOUND
-- Performing Test WINLINE_C_FLAG_FOUND - Success
-- Performing Test WNO_INLINE_CXX_FLAG_FOUND
-- Performing Test WNO_INLINE_CXX_FLAG_FOUND - Success
-- Performing Test WNO_ERROR_LONG_LONG_C_FLAG_FOUND
-- Performing Test WNO_ERROR_LONG_LONG_C_FLAG_FOUND - Success
-- Performing Test WNO_LONG_LONG_C_FLAG_FOUND
-- Performing Test WNO_LONG_LONG_C_FLAG_FOUND - Success
-- Performing Test WNO_LONG_LONG_CXX_FLAG_FOUND
-- Performing Test WNO_LONG_LONG_CXX_FLAG_FOUND - Success
-- Performing Test WNO_ERROR_VARIADIC_MACROS_C_FLAG_FOUND
-- Performing Test WNO_ERROR_VARIADIC_MACROS_C_FLAG_FOUND - Success
-- Performing Test WNO_VARIADIC_MACROS_C_FLAG_FOUND
-- Performing Test WNO_VARIADIC_MACROS_C_FLAG_FOUND - Success
-- Performing Test WNO_VARIADIC_MACROS_CXX_FLAG_FOUND
-- Performing Test WNO_VARIADIC_MACROS_CXX_FLAG_FOUND - Success
-- Performing Test WDOCUMENTATION_C_FLAG_FOUND
-- Performing Test WDOCUMENTATION_C_FLAG_FOUND - Failed
-- Performing Test WDOCUMENTATION_CXX_FLAG_FOUND
-- Performing Test WDOCUMENTATION_CXX_FLAG_FOUND - Failed
-- Performing Test HAVE_C_WUNUSED_CONST_VARIABLE
-- Performing Test HAVE_C_WUNUSED_CONST_VARIABLE - Success
***********************************************************
*             Stage 4 of 9 - Check for Libraries          *
***********************************************************
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD - Success
-- Found Threads: TRUE
-- Performing Test STL_LIB_TEST
-- Performing Test STL_LIB_TEST - Success
-- Checking for module 'mpi-c'
--   Package 'mpi-c', required by 'virtual:world', not found
-- Could NOT find MPI_C (missing: MPI_C_LIB_NAMES MPI_C_HEADER_DIR MPI_C_WORKS)
-- Could NOT find MPI (missing: MPI_C_FOUND C)
-- Performing Test HAVE_NO_BUILTIN
-- Performing Test HAVE_NO_BUILTIN - Success
-- Looking for daemon in bsd
-- Looking for daemon in bsd - not found
-- Looking for daemon in c
-- Looking for daemon in c - found
X11 detected and enabled
-- Looking for cos in m
-- Looking for cos in m - found
-- Found UUID: /usr/lib64/libuuid.so
-- Looking for uuid_generate
-- Looking for uuid_generate - found
-- Looking for socket in socket
-- Looking for socket in socket - not found
-- Looking for gethostbyaddr in nsl
-- Looking for gethostbyaddr in nsl - not found
-- Looking for socket in network
-- Looking for socket in network - not found
-- Looking for mallopt in c
-- Looking for mallopt in c - found
-- Looking for mallopt
-- Looking for mallopt - found
-- Looking for dlopen in dl
-- Looking for dlopen in dl - found
-- Looking for yyless in l
-- Looking for yyless in l - not found
***********************************************************
*               Stage 5 of 9 - Check for Headers          *
***********************************************************
-- Performing Test WORKING_SYS_WAIT
-- Performing Test WORKING_SYS_WAIT - Success
-- Looking for include file dirent.h
-- Looking for include file dirent.h - found
-- Looking for include file conio.h
-- Looking for include file conio.h - not found
-- Looking for include file direct.h
-- Looking for include file direct.h - not found
-- Looking for include file dlfcn.h
-- Looking for include file dlfcn.h - found
-- Looking for include file dslib.h
-- Looking for include file dslib.h - not found
-- Looking for include file emmintrin.h
-- Looking for include file emmintrin.h - found
-- Looking for include file getopt.h
-- Looking for include file getopt.h - found
-- Looking for include file GL/gl.h
-- Looking for include file GL/gl.h - found
-- Looking for include file gl/device.h
-- Looking for include file gl/device.h - not found
-- Looking for include file gl/glext.h
-- Looking for include file gl/glext.h - not found
-- Looking for include file gl/wglext.h
-- Looking for include file gl/wglext.h - not found
-- Looking for include file glob.h
-- Looking for include file glob.h - found
-- Looking for include file grp.h
-- Looking for include file grp.h - found
-- Looking for include file inttypes.h
-- Looking for include file inttypes.h - found
-- Looking for include file io.h
-- Looking for include file io.h - not found
-- Looking for include file libgen.h
-- Looking for include file libgen.h - found
-- Looking for include file mach/host_info.h
-- Looking for include file mach/host_info.h - not found
-- Looking for include file mach/mach_host.h
-- Looking for include file mach/mach_host.h - not found
-- Looking for include file mach/thread_policy.h
-- Looking for include file mach/thread_policy.h - not found
-- Looking for include file memory.h
-- Looking for include file memory.h - found
-- Looking for include file netdb.h
-- Looking for include file netdb.h - found
-- Looking for include file netinet/in.h
-- Looking for include file netinet/in.h - found
-- Looking for include file poll.h
-- Looking for include file poll.h - found
-- Looking for include file process.h
-- Looking for include file process.h - not found
-- Looking for include file pthread.h
-- Looking for include file pthread.h - found
-- Looking for include file pthread_np.h
-- Looking for include file pthread_np.h - not found
-- Looking for include file pwd.h
-- Looking for include file pwd.h - found
-- Looking for include file sched.h
-- Looking for include file sched.h - found
-- Looking for include file sgtty.h
-- Looking for include file sgtty.h - found
-- Looking for include file signal.h
-- Looking for include file signal.h - found
-- Looking for include file stdlib.h
-- Looking for include file stdlib.h - found
-- Looking for include file string.h
-- Looking for include file string.h - found
-- Looking for include file strings.h
-- Looking for include file strings.h - found
-- Looking for include file strsafe.h
-- Looking for include file strsafe.h - not found
-- Looking for include file sys/cpuset.h
-- Looking for include file sys/cpuset.h - not found
-- Looking for include file sys/file.h
-- Looking for include file sys/file.h - found
-- Looking for include file sys/ioctl.h
-- Looking for include file sys/ioctl.h - found
-- Looking for include file sys/ioctl_compat.h
-- Looking for include file sys/ioctl_compat.h - not found
-- Looking for include file sys/ipc.h
-- Looking for include file sys/ipc.h - found
-- Looking for include file sys/machd.h
-- Looking for include file sys/machd.h - not found
-- Looking for include file sys/mman.h
-- Looking for include file sys/mman.h - found
-- Looking for include file sys/mount.h
-- Looking for include file sys/mount.h - found
-- Looking for include file sys/param.h
-- Looking for include file sys/param.h - found
-- Looking for include file sys/prctl.h
-- Looking for include file sys/prctl.h - found
-- Looking for include file sys/resource.h
-- Looking for include file sys/resource.h - found
-- Looking for include file sys/sched.h
-- Looking for include file sys/sched.h - not found
-- Looking for include file sys/select.h
-- Looking for include file sys/select.h - found
-- Looking for include file sys/shm.h
-- Looking for include file sys/shm.h - found
-- Looking for include file sys/socket.h
-- Looking for include file sys/socket.h - found
-- Looking for include file sys/stat.h
-- Looking for include file sys/stat.h - found
-- Looking for include file sys/syscall.h
-- Looking for include file sys/syscall.h - found
-- Looking for include file sys/sysctl.h
-- Looking for include file sys/sysctl.h - not found
-- Looking for include file sys/sysinfo.h
-- Looking for include file sys/sysinfo.h - found
-- Looking for include file sys/sysmp.h
-- Looking for include file sys/sysmp.h - not found
-- Looking for include file sys/time.h
-- Looking for include file sys/time.h - found
-- Looking for include file sys/times.h
-- Looking for include file sys/times.h - found
-- Looking for include file sys/uio.h
-- Looking for include file sys/uio.h - found
-- Looking for include file sys/un.h
-- Looking for include file sys/un.h - found
-- Looking for include file sys/utsname.h
-- Looking for include file sys/utsname.h - found
-- Looking for include file sys/wait.h
-- Looking for include file sys/wait.h - found
-- Looking for include file syslog.h
-- Looking for include file syslog.h - found
-- Looking for include file ulocks.h
-- Looking for include file ulocks.h - not found
-- Looking for include file uuid.h
-- Looking for include file uuid.h - not found
-- Looking for include file unistd.h
-- Looking for include file unistd.h - found
-- Looking for include file uuid/uuid.h
-- Looking for include file uuid/uuid.h - found
-- Performing Test HAVE_LIBPROC_H
-- Performing Test HAVE_LIBPROC_H - Failed
-- Looking for include file termios.h
-- Looking for include file termios.h - found
-- Looking for include file termio.h
-- Looking for include file termio.h - found
-- Looking for C++ include istream
-- Looking for C++ include istream - found
-- Looking for C++ include limits
-- Looking for C++ include limits - found
-- Performing Test HAVE_BASENAME
-- Performing Test HAVE_BASENAME - Success
-- Performing Test HAVE_DIRNAME
-- Performing Test HAVE_DIRNAME - Success
-- Performing Test HAVE_EMMINTRIN
-- Performing Test HAVE_EMMINTRIN - Success
***********************************************************
*          Stage 6 of 9 - Check for Types/Structures      *
***********************************************************
-- Performing Test HAVE_STRUCT_STAT_ST_BLKSIZE
-- Performing Test HAVE_STRUCT_STAT_ST_BLKSIZE - Success
-- Performing Test HAVE_STRUCT_STAT_ST_BLOCKS
-- Performing Test HAVE_STRUCT_STAT_ST_BLOCKS - Success
-- Performing Test HAVE_STRUCT_STAT_ST_RDEV
-- Performing Test HAVE_STRUCT_STAT_ST_RDEV - Success
-- Performing Test HAVE_STRUCT_TIMESPEC
-- Performing Test HAVE_STRUCT_TIMESPEC - Success
-- Check size of socklen_t
-- Check size of socklen_t - failed
-- Check size of socklen_t
-- Check size of socklen_t - failed
-- Check size of socklen_t
-- Check size of socklen_t - done
-- Check size of cpu_set_t
-- Check size of cpu_set_t - done
-- Check size of int
-- Check size of int - done
-- Check size of long
-- Check size of long - done
-- Check size of long long
-- Check size of long long - done
-- Check size of off_t
-- Check size of off_t - done
-- Check size of ptrdiff_t
-- Check size of ptrdiff_t - done
-- Check size of size_t
-- Check size of size_t - done
-- Check size of ssize_t
-- Check size of ssize_t - done
-- Check size of uint64_t
-- Check size of uint64_t - done
-- Check size of uintptr_t
-- Check size of uintptr_t - done
-- Check size of sig_t
-- Check size of sig_t - failed
-- Check size of u_char
-- Check size of u_char - failed
-- Check size of u_int
-- Check size of u_int - failed
-- Check size of u_long
-- Check size of u_long - failed
-- Check size of u_short
-- Check size of u_short - failed
-- Performing Test HAVE_THREAD_LOCAL
-- Performing Test HAVE_THREAD_LOCAL - Success
-- Performing Test HAVE_PERCENT_Z
-- Performing Test HAVE_PERCENT_Z - Success
-- Performing Test HAVE_STATIC_ARRAYS
-- Performing Test HAVE_STATIC_ARRAYS - Success
***********************************************************
*              Stage 7 of 9 - Check for Functions         *
***********************************************************
-- Looking for XQueryExtension
-- Looking for XQueryExtension - not found
-- Looking for _putenv_s
-- Looking for _putenv_s - not found
-- Looking for _splitpath
-- Looking for _splitpath - not found
-- Looking for _strtoi64
-- Looking for _strtoi64 - not found
-- Looking for alarm
-- Looking for alarm - found
-- Performing Test HAVE_DECL_ALARM
-- Performing Test HAVE_DECL_ALARM - Success
-- Looking for asinh
-- Looking for asinh - found
-- Performing Test HAVE_DECL_ASINH
-- Performing Test HAVE_DECL_ASINH - Success
-- Looking for confstr
-- Looking for confstr - found
-- Performing Test HAVE_DECL_CONFSTR
-- Performing Test HAVE_DECL_CONFSTR - Success
-- Looking for dlopen
-- Looking for dlopen - found
-- Performing Test HAVE_DECL_DLOPEN
-- Performing Test HAVE_DECL_DLOPEN - Failed
-- Looking for dladdr
-- Looking for dladdr - found
-- Performing Test HAVE_DECL_DLADDR
-- Performing Test HAVE_DECL_DLADDR - Failed
-- Looking for drand48
-- Looking for drand48 - found
-- Performing Test HAVE_DECL_DRAND48
-- Performing Test HAVE_DECL_DRAND48 - Success
-- Looking for fchmod
-- Looking for fchmod - found
-- Performing Test HAVE_DECL_FCHMOD
-- Performing Test HAVE_DECL_FCHMOD - Success
-- Looking for fdopen
-- Looking for fdopen - found
-- Performing Test HAVE_DECL_FDOPEN
-- Performing Test HAVE_DECL_FDOPEN - Success
-- Looking for fmemopen
-- Looking for fmemopen - found
-- Performing Test HAVE_DECL_FMEMOPEN
-- Performing Test HAVE_DECL_FMEMOPEN - Success
-- Looking for fseeko
-- Looking for fseeko - found
-- Performing Test HAVE_DECL_FSEEKO
-- Performing Test HAVE_DECL_FSEEKO - Success
-- Looking for fsync
-- Looking for fsync - found
-- Performing Test HAVE_DECL_FSYNC
-- Performing Test HAVE_DECL_FSYNC - Success
-- Looking for funopen
-- Looking for funopen - not found
-- Looking for getcwd
-- Looking for getcwd - found
-- Performing Test HAVE_DECL_GETCWD
-- Performing Test HAVE_DECL_GETCWD - Success
-- Looking for getegid
-- Looking for getegid - found
-- Performing Test HAVE_DECL_GETEGID
-- Performing Test HAVE_DECL_GETEGID - Success
-- Looking for getenv_s
-- Looking for getenv_s - not found
-- Looking for geteuid
-- Looking for geteuid - found
-- Performing Test HAVE_DECL_GETEUID
-- Performing Test HAVE_DECL_GETEUID - Success
-- Looking for gethostname
-- Looking for gethostname - found
-- Performing Test HAVE_DECL_GETHOSTNAME
-- Performing Test HAVE_DECL_GETHOSTNAME - Success
-- Looking for getloadavg
-- Looking for getloadavg - found
-- Performing Test HAVE_DECL_GETLOADAVG
-- Performing Test HAVE_DECL_GETLOADAVG - Failed
-- Looking for getopt_long
-- Looking for getopt_long - found
-- Performing Test HAVE_DECL_GETOPT_LONG
-- Performing Test HAVE_DECL_GETOPT_LONG - Success
-- Looking for getpid
-- Looking for getpid - found
-- Performing Test HAVE_DECL_GETPID
-- Performing Test HAVE_DECL_GETPID - Success
-- Looking for getprogname
-- Looking for getprogname - not found
-- Looking for gettimeofday
-- Looking for gettimeofday - found
-- Performing Test HAVE_DECL_GETTIMEOFDAY
-- Performing Test HAVE_DECL_GETTIMEOFDAY - Success
-- Looking for htonl
-- Looking for htonl - found
-- Performing Test HAVE_DECL_HTONL
-- Performing Test HAVE_DECL_HTONL - Success
-- Looking for htonll
-- Looking for htonll - not found
-- Looking for hypot
-- Looking for hypot - found
-- Performing Test HAVE_DECL_HYPOT
-- Performing Test HAVE_DECL_HYPOT - Success
-- Looking for isascii
-- Looking for isascii - found
-- Performing Test HAVE_DECL_ISASCII
-- Performing Test HAVE_DECL_ISASCII - Success
-- Looking for isinf
-- Looking for isinf - found
-- Performing Test HAVE_DECL_ISINF
-- Performing Test HAVE_DECL_ISINF - Failed
-- Looking for isnan
-- Looking for isnan - found
-- Performing Test HAVE_DECL_ISNAN
-- Performing Test HAVE_DECL_ISNAN - Failed
-- Looking for logb
-- Looking for logb - found
-- Performing Test HAVE_DECL_LOGB
-- Performing Test HAVE_DECL_LOGB - Success
-- Looking for lrand48
-- Looking for lrand48 - found
-- Performing Test HAVE_DECL_LRAND48
-- Performing Test HAVE_DECL_LRAND48 - Success
-- Looking for lseek
-- Looking for lseek - found
-- Performing Test HAVE_DECL_LSEEK
-- Performing Test HAVE_DECL_LSEEK - Success
-- Looking for mkstemp
-- Looking for mkstemp - found
-- Performing Test HAVE_DECL_MKSTEMP
-- Performing Test HAVE_DECL_MKSTEMP - Success
-- Looking for modff
-- Looking for modff - found
-- Performing Test HAVE_DECL_MODFF
-- Performing Test HAVE_DECL_MODFF - Success
-- Looking for nextafter
-- Looking for nextafter - found
-- Performing Test HAVE_DECL_NEXTAFTER
-- Performing Test HAVE_DECL_NEXTAFTER - Success
-- Looking for nextafterf
-- Looking for nextafterf - found
-- Performing Test HAVE_DECL_NEXTAFTERF
-- Performing Test HAVE_DECL_NEXTAFTERF - Success
-- Looking for ntohll
-- Looking for ntohll - not found
-- Looking for pipe
-- Looking for pipe - found
-- Performing Test HAVE_DECL_PIPE
-- Performing Test HAVE_DECL_PIPE - Success
-- Looking for popen
-- Looking for popen - found
-- Performing Test HAVE_DECL_POPEN
-- Performing Test HAVE_DECL_POPEN - Success
-- Looking for posix_memalign
-- Looking for posix_memalign - found
-- Performing Test HAVE_DECL_POSIX_MEMALIGN
-- Performing Test HAVE_DECL_POSIX_MEMALIGN - Success
-- Looking for proc_pidpath
-- Looking for proc_pidpath - not found
-- Looking for program_invocation_name
-- Looking for program_invocation_name - found
-- Performing Test HAVE_DECL_PROGRAM_INVOCATION_NAME
-- Performing Test HAVE_DECL_PROGRAM_INVOCATION_NAME - Failed
-- Looking for random
-- Looking for random - found
-- Performing Test HAVE_DECL_RANDOM
-- Performing Test HAVE_DECL_RANDOM - Success
-- Looking for realpath
-- Looking for realpath - found
-- Performing Test HAVE_DECL_REALPATH
-- Performing Test HAVE_DECL_REALPATH - Success
-- Looking for rint
-- Looking for rint - found
-- Performing Test HAVE_DECL_RINT
-- Performing Test HAVE_DECL_RINT - Success
-- Looking for setenv
-- Looking for setenv - found
-- Performing Test HAVE_DECL_SETENV
-- Performing Test HAVE_DECL_SETENV - Success
-- Looking for setpgid
-- Looking for setpgid - found
-- Performing Test HAVE_DECL_SETPGID
-- Performing Test HAVE_DECL_SETPGID - Success
-- Looking for setpriority
-- Looking for setpriority - found
-- Performing Test HAVE_DECL_SETPRIORITY
-- Performing Test HAVE_DECL_SETPRIORITY - Success
-- Looking for setsid
-- Looking for setsid - found
-- Performing Test HAVE_DECL_SETSID
-- Performing Test HAVE_DECL_SETSID - Success
-- Looking for shmat
-- Looking for shmat - found
-- Performing Test HAVE_DECL_SHMAT
-- Performing Test HAVE_DECL_SHMAT - Success
-- Looking for shmctl
-- Looking for shmctl - found
-- Performing Test HAVE_DECL_SHMCTL
-- Performing Test HAVE_DECL_SHMCTL - Success
-- Looking for shmdt
-- Looking for shmdt - found
-- Performing Test HAVE_DECL_SHMDT
-- Performing Test HAVE_DECL_SHMDT - Success
-- Looking for shmget
-- Looking for shmget - found
-- Performing Test HAVE_DECL_SHMGET
-- Performing Test HAVE_DECL_SHMGET - Success
-- Looking for snprintf
-- Looking for snprintf - found
-- Performing Test HAVE_DECL_SNPRINTF
-- Performing Test HAVE_DECL_SNPRINTF - Success
-- Looking for srand48
-- Looking for srand48 - found
-- Performing Test HAVE_DECL_SRAND48
-- Performing Test HAVE_DECL_SRAND48 - Success
-- Looking for strcasecmp
-- Looking for strcasecmp - found
-- Performing Test HAVE_DECL_STRCASECMP
-- Performing Test HAVE_DECL_STRCASECMP - Failed
-- Looking for strdup
-- Looking for strdup - found
-- Performing Test HAVE_DECL_STRDUP
-- Performing Test HAVE_DECL_STRDUP - Success
-- Looking for strlcat
-- Looking for strlcat - found
-- Performing Test HAVE_DECL_STRLCAT
-- Performing Test HAVE_DECL_STRLCAT - Failed
-- Looking for strlcpy
-- Looking for strlcpy - found
-- Performing Test HAVE_DECL_STRLCPY
-- Performing Test HAVE_DECL_STRLCPY - Failed
-- Looking for strncasecmp
-- Looking for strncasecmp - found
-- Performing Test HAVE_DECL_STRNCASECMP
-- Performing Test HAVE_DECL_STRNCASECMP - Failed
-- Looking for strtoll
-- Looking for strtoll - found
-- Performing Test HAVE_DECL_STRTOLL
-- Performing Test HAVE_DECL_STRTOLL - Success
-- Looking for sync
-- Looking for sync - found
-- Performing Test HAVE_DECL_SYNC
-- Performing Test HAVE_DECL_SYNC - Success
-- Looking for syscall
-- Looking for syscall - found
-- Performing Test HAVE_DECL_SYSCALL
-- Performing Test HAVE_DECL_SYSCALL - Failed
-- Looking for sysctl
-- Looking for sysctl - not found
-- Looking for sysmp
-- Looking for sysmp - not found
-- Looking for time
-- Looking for time - found
-- Performing Test HAVE_DECL_TIME
-- Performing Test HAVE_DECL_TIME - Failed
-- Looking for toascii
-- Looking for toascii - found
-- Performing Test HAVE_DECL_TOASCII
-- Performing Test HAVE_DECL_TOASCII - Success
-- Looking for tzset
-- Looking for tzset - found
-- Performing Test HAVE_DECL_TZSET
-- Performing Test HAVE_DECL_TZSET - Failed
-- Looking for uname
-- Looking for uname - found
-- Performing Test HAVE_DECL_UNAME
-- Performing Test HAVE_DECL_UNAME - Failed
-- Looking for vfork
-- Looking for vfork - found
-- Performing Test HAVE_DECL_VFORK
-- Performing Test HAVE_DECL_VFORK - Failed
-- Looking for vsnprintf
-- Looking for vsnprintf - found
-- Performing Test HAVE_DECL_VSNPRINTF
-- Performing Test HAVE_DECL_VSNPRINTF - Success
-- Looking for vsscanf
-- Looking for vsscanf - found
-- Performing Test HAVE_DECL_VSSCANF
-- Performing Test HAVE_DECL_VSSCANF - Success
-- Looking for wait
-- Looking for wait - found
-- Performing Test HAVE_DECL_WAIT
-- Performing Test HAVE_DECL_WAIT - Success
-- Looking for writev
-- Looking for writev - found
-- Performing Test HAVE_DECL_WRITEV
-- Performing Test HAVE_DECL_WRITEV - Success
-- Performing Test WORKING_ALLOCA
-- Performing Test WORKING_ALLOCA - Success
-- Looking for kill
-- Looking for kill - found
-- Performing Test HAVE_DECL_KILL
-- Performing Test HAVE_DECL_KILL - Success
-- Looking for fileno
-- Looking for fileno - found
-- Performing Test HAVE_DECL_FILENO
-- Performing Test HAVE_DECL_FILENO - Success
-- Looking for daemon
-- Looking for daemon - found
-- Performing Test HAVE_DECL_DAEMON
-- Performing Test HAVE_DECL_DAEMON - Failed
-- Performing Test HAVE_WORKING_DAEMON_FUNCTION
-- Performing Test HAVE_WORKING_DAEMON_FUNCTION - Failed
-- Looking for sysconf
-- Looking for sysconf - found
-- Performing Test HAVE_DECL_SYSCONF
-- Performing Test HAVE_DECL_SYSCONF - Success
-- Performing Test HAVE_SYSCONF_AVPHYS
-- Performing Test HAVE_SYSCONF_AVPHYS - Success
-- Looking for ntohll
-- Looking for ntohll - not found
-- Looking for htonll
-- Looking for htonll - not found
-- Performing Test HAVE_WORKING_REALPATH
-- Performing Test HAVE_WORKING_REALPATH - Success
-- Performing Test HAVE_GETFULLPATHNAME
-- Performing Test HAVE_GETFULLPATHNAME - Failed
-- Performing Test HAVE_GETPROCESSTIMES
-- Performing Test HAVE_GETPROCESSTIMES - Failed
-- Performing Test HAVE_GETCURRENTPROCESSID
-- Performing Test HAVE_GETCURRENTPROCESSID - Failed
-- Looking for lrint
-- Looking for lrint - found
-- Performing Test HAVE_DECL_LRINT
-- Performing Test HAVE_DECL_LRINT - Success
-- Looking for tgamma
-- Looking for tgamma - found
-- Performing Test HAVE_DECL_TGAMMA
-- Performing Test HAVE_DECL_TGAMMA - Success
-- Looking for gethostbyaddr
-- Looking for gethostbyaddr - found
-- Performing Test HAVE_DECL_GETHOSTBYADDR
-- Performing Test HAVE_DECL_GETHOSTBYADDR - Success
-- Looking for gethostbyname
-- Looking for gethostbyname - found
-- Performing Test HAVE_DECL_GETHOSTBYNAME
-- Performing Test HAVE_DECL_GETHOSTBYNAME - Success
-- Performing Test HAVE_CXX_LOGB
-- Performing Test HAVE_CXX_LOGB - Success
***********************************************************
*          Stage 8 of 9 - Check for System Services       *
***********************************************************
Attempting to prepare our own version of the bext dependencies

BRL-CAD bext clone command: /usr/bin/git clone https://github.com/BRL-CAD/bext.git
Cloning into 'bext'...
BRL-CAD bext checkout command: /usr/bin/git -c advice.detachedHead=false checkout 90ea63597e529a03e05158ffcfbf0803591c87fa
HEAD is now at 90ea635 apply same fix as tcl for mac.
/usr/bin/cmake -S;/home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext;-B;/home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build;-DGIT_SHALLOW_CLONE=ON;-DENABLE_ALL=ON;-DUSE_GDAL=ON;-DUSE_QT=OFF;-DUSE_TCL=ON;-DUSE_APPLESEED=OFF;-DCMAKE_BUILD_TYPE=Release;-DCMAKE_INSTALL_PREFIX=/home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_output
-- The C compiler identification is GNU 14.2.1
-- The CXX compiler identification is GNU 14.2.1
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/lib64/ccache/cc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Check for working CXX compiler: /usr/lib64/ccache/c++ - skipped
-- Detecting CXX compile features
-- Detecting CXX compile features - done
prefix is /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_output
Submodule 'patch/patch' (https://github.com/BRL-CAD/patch) registered for path 'patch'
Cloning into '/home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext/patch/patch'...
Submodule path 'patch': checked out '47e172997e413a3b53fef9ededfe1a507f24644f'
Submodule 'astyle/astyle' (https://github.com/BRL-CAD/astyle) registered for path 'astyle'
Cloning into '/home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext/astyle/astyle'...
Submodule path 'astyle': checked out '35f559a2f62bba26ad49b064762458cdc74e4ccd'
Submodule 'lemon/lemon' (https://github.com/BRL-CAD/lemon) registered for path 'lemon'
Cloning into '/home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext/lemon/lemon'...
Submodule path 'lemon': checked out '6cf51b074feab9fcc5f5d5e21aab065ea26a7d8f'
Submodule 're2c/re2c' (https://github.com/BRL-CAD/re2c) registered for path 're2c'
Cloning into '/home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext/re2c/re2c'...
Submodule path 're2c': checked out 'ece4bb76e39db7071d5dd374d166008d5f982c3f'
Submodule 'benchmarks/submatch_java/REgen' (https://github.com/skvadrik/REgen.git) registered for path 're2c/benchmarks/submatch_java/REgen'
Cloning into '/home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext/re2c/re2c/benchmarks/submatch_java/REgen'...
Submodule path 're2c/benchmarks/submatch_java/REgen': checked out 'b5dd94d15d07b626169b75ccd34bc4558f525874'
Submodule 'perplex/perplex' (https://github.com/BRL-CAD/perplex) registered for path 'perplex'
Cloning into '/home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext/perplex/perplex'...
Submodule path 'perplex': checked out '9c2cba2719a6010ed0b940f5cf99612c207df3c6'
Submodule 'strclear/strclear' (https://github.com/BRL-CAD/strclear) registered for path 'strclear'
Cloning into '/home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext/strclear/strclear'...
Submodule path 'strclear': checked out 'dc764c329801257b7078b8164245baf8295a47f0'
Submodule 'xmltools/xmltools' (https://github.com/BRL-CAD/xmltools) registered for path 'xmltools'
Cloning into '/home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext/xmltools/xmltools'...
Submodule path 'xmltools': checked out '35d025f7e25ad97dc6bf5b3f446e40887399dbec'
Submodule 'lief/LIEF' (https://github.com/BRL-CAD/LIEF) registered for path 'LIEF'
Cloning into '/home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext/lief/LIEF'...
Submodule path 'LIEF': checked out 'c82f9c64f286ef4b3bca64f8a1c8dbd1cc260cf9'
Submodule 'plief/plief' (https://github.com/BRL-CAD/plief) registered for path 'plief'
Cloning into '/home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext/plief/plief'...
Submodule path 'plief': checked out 'ff7abbe55676fb89baec666db9a401caf027a1d4'
Submodule 'zlib/zlib' (https://github.com/BRL-CAD/zlib) registered for path 'zlib'
Cloning into '/home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext/zlib/zlib'...
Submodule path 'zlib': checked out '0a8a84b7ac754950bd3fef27673fe81b38c59975'
Submodule 'regex/regex' (https://github.com/BRL-CAD/regex) registered for path 'regex'
Cloning into '/home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext/regex/regex'...
Submodule path 'regex': checked out 'd26a6f727005adf483c84e95b838ac1c7980fea8'
Submodule 'netpbm/netpbm' (https://github.com/BRL-CAD/netpbm) registered for path 'netpbm'
Cloning into '/home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext/netpbm/netpbm'...
Submodule path 'netpbm': checked out '99ce8abc6f9acb8bbad7124c4e72142149482b93'
Submodule 'jpeg/libjpeg-turbo' (https://github.com/BRL-CAD/libjpeg-turbo) registered for path 'libjpeg-turbo'
Cloning into '/home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext/jpeg/libjpeg-turbo'...
Submodule path 'libjpeg-turbo': checked out '7fa4b5b762c9a99b46b0b7838f5fd55071b92ea5'
Submodule 'png/libpng' (https://github.com/BRL-CAD/libpng) registered for path 'libpng'
Cloning into '/home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext/png/libpng'...
Submodule path 'libpng': checked out 'f5e92d76973a7a53f517579bc95d61483bf108c0'
Submodule 'tiff/libtiff' (https://github.com/BRL-CAD/libtiff) registered for path 'libtiff'
Cloning into '/home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext/tiff/libtiff'...
Submodule path 'libtiff': checked out '9dff73bebc5661f2dace6f16e14cf9e857172f4e'
Submodule 'utahrle/utahrle' (https://github.com/BRL-CAD/utahrle) registered for path 'utahrle'
Cloning into '/home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext/utahrle/utahrle'...
Submodule path 'utahrle': checked out 'af1fe23824e2ea1865bfa4b35be0cbc9d4c7177d'
Submodule 'lmdb/lmdb' (https://github.com/BRL-CAD/lmdb) registered for path 'lmdb'
Cloning into '/home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext/lmdb/lmdb'...
Submodule path 'lmdb': checked out '9c9d34558cc438f99aebd1ab58f83fd7faeabc0a'
Submodule 'eigen/eigen' (https://github.com/BRL-CAD/eigen) registered for path 'eigen'
Cloning into '/home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext/eigen/eigen'...
Submodule path 'eigen': checked out '3147391d946bb4b6c68edd901f2add6ac1f31f8c'
Submodule 'stepcode/stepcode' (https://github.com/BRL-CAD/stepcode) registered for path 'stepcode'
Cloning into '/home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext/stepcode/stepcode'...
Submodule path 'stepcode': checked out '5cf8fc1a8907983365b233280f128566956713fa'
Submodule 'sqlite3/sqlite3' (https://github.com/BRL-CAD/sqlite3.git) registered for path 'sqlite3'
Cloning into '/home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext/sqlite3/sqlite3'...
Submodule path 'sqlite3': checked out '963d09e27d2577ae731c8abe413388583b9af29b'
Submodule 'proj/PROJ' (https://github.com/BRL-CAD/PROJ) registered for path 'PROJ'
Cloning into '/home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext/proj/PROJ'...
Submodule path 'PROJ': checked out '2b3b06d8d1208b3db62a5cca7c4429e3d36e65d7'
Submodule 'gdal/gdal' (https://github.com/BRL-CAD/gdal) registered for path 'gdal'
Cloning into '/home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext/gdal/gdal'...
Submodule path 'gdal': checked out '2ca3becf707e896ca37fd3ae0295269ecb5ef5c2'
Submodule 'tinygltf/tinygltf' (https://github.com/BRL-CAD/tinygltf.git) registered for path 'tinygltf'
Cloning into '/home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext/tinygltf/tinygltf'...
Submodule path 'tinygltf': checked out '116d0030f9a55151eb1890b7b7131e4c0602de96'
Submodule 'pugixml/pugixml' (https://github.com/BRL-CAD/pugixml) registered for path 'pugixml'
Cloning into '/home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext/pugixml/pugixml'...
Submodule path 'pugixml': checked out 'db78afc2b7d8f043b4bc6b185635d949ea2ed2a8'
Submodule 'assetimport/assimp' (https://github.com/BRL-CAD/assimp) registered for path 'assimp'
Cloning into '/home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext/assetimport/assimp'...
Submodule path 'assimp': checked out '61aeb7a67bd6da324a911cd6b6454980832aeb81'
Submodule 'opencv/opencv' (https://github.com/BRL-CAD/opencv) registered for path 'opencv'
Cloning into '/home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext/opencv/opencv'...
Submodule path 'opencv': checked out 'cc77d31ca7d3f22d3adbdf79baba0275dae0a3f8'
Submodule 'clipper2/Clipper2' (https://github.com/BRL-CAD/Clipper2.git) registered for path 'Clipper2'
Cloning into '/home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext/clipper2/Clipper2'...
Submodule path 'Clipper2': checked out '736ddb0b53d97fd5f65dd3d9bbf8a0993eaf387c'
Submodule 'gte/GeometricTools' (https://github.com/BRL-CAD/GeometricTools) registered for path 'GeometricTools'
Cloning into '/home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext/gte/GeometricTools'...
Submodule path 'GeometricTools': checked out '7adae93f85c2c2d0e949d4b717f4f408954d1a86'
Submodule 'mmesh/mmesh' (https://github.com/BRL-CAD/mmesh.git) registered for path 'mmesh'
Cloning into '/home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext/mmesh/mmesh'...
Submodule path 'mmesh': checked out '1955dabe104c42f8964609a228b6b77963b5a069'
Submodule 'openmesh/OpenMesh' (https://github.com/BRL-CAD/OpenMesh) registered for path 'OpenMesh'
Cloning into '/home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext/openmesh/OpenMesh'...
Submodule path 'OpenMesh': checked out 'aa95c746143663effdfbfba08edc8020769be0a0'
Submodule 'manifold/manifold' (https://github.com/BRL-CAD/manifold.git) registered for path 'manifold'
Cloning into '/home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext/manifold/manifold'...
Submodule path 'manifold': checked out 'edb4b25f647e23312d823c8bd6eb662ce9b1c9a8'
Submodule 'opennurbs/opennurbs' (https://github.com/BRL-CAD/opennurbs) registered for path 'opennurbs'
Cloning into '/home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext/opennurbs/opennurbs'...
Submodule path 'opennurbs': checked out '285c43ce2bd6c917bdc3e3f1eca0da466c1b07d1'
Submodule 'osmesa/osmesa' (https://github.com/BRL-CAD/osmesa) registered for path 'osmesa'
Cloning into '/home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext/osmesa/osmesa'...
Submodule path 'osmesa': checked out '3c0574b0e8555fe725c50c30939a84e6ab94b99a'
Submodule 'geogram/geogram' (https://github.com/BRL-CAD/geogram.git) registered for path 'geogram'
Cloning into '/home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext/geogram/geogram'...
Submodule path 'geogram': checked out '888172e37ea4729469fa2c5dbbc15ba68b8c234e'
Submodule 'tcl/tcl' (https://github.com/BRL-CAD/tcl.git) registered for path 'tcl'
Cloning into '/home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext/tcl/tcl'...
Submodule path 'tcl': checked out '794c4efb40b5ac2527cea809e884a0822026c4f4'
Submodule 'tk/tk' (https://github.com/BRL-CAD/tk) registered for path 'tk'
Cloning into '/home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext/tk/tk'...
Submodule path 'tk': checked out 'f195332797683d3a7c048a0d1282b9ef1781435f'
Submodule 'itcl3/itcl' (https://github.com/BRL-CAD/itcl) registered for path 'itcl'
Cloning into '/home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext/itcl/itcl'...
Submodule path 'itcl': checked out '33cea588fa63d9c4ef33e5f4f7d7fae08163a220'
Submodule 'itk3/itk' (https://github.com/BRL-CAD/itk) registered for path 'itk'
Cloning into '/home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext/itk/itk'...
Submodule path 'itk': checked out '0d1dc9780c59c2b81e78a1351652fd4488fe67c0'
Submodule 'iwidgets/iwidgets' (https://github.com/BRL-CAD/iwidgets) registered for path 'iwidgets'
Cloning into '/home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext/iwidgets/iwidgets'...
Submodule path 'iwidgets': checked out 'ce8f624329a32c042c7da110166d03a6f5ad03c3'
Submodule 'tkhtml/tkhtml' (https://github.com/BRL-CAD/tkhtml) registered for path 'tkhtml'
Cloning into '/home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext/tkhtml/tkhtml'...
Submodule path 'tkhtml': checked out '194cd5a3121936a00f0d8393df324b86c4b7627d'
Submodule 'tktable/tktable' (https://github.com/BRL-CAD/tktable) registered for path 'tktable'
Cloning into '/home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext/tktable/tktable'...
Submodule path 'tktable': checked out '05e3a95b79c140a5001ba99774209b1ff78026f4'
Output directory: /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_output
-- Configuring done (1923.2s)
-- Generating done (0.2s)
-- Build files have been written to: /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build
/usr/bin/cmake --build /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build --parallel 8 --config Release
[  0%] Creating directories for 'PATCH_BLD'
[  0%] Built target BuildStamp
[  0%] No download step for 'PATCH_BLD'
[  1%] No update step for 'PATCH_BLD'
[  1%] No patch step for 'PATCH_BLD'
[  1%] Performing configure step for 'PATCH_BLD'
-- PATCH_BLD configure command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/patch/PATCH_BLD-prefix/src/PATCH_BLD-stamp/PATCH_BLD-configure-*.log
[  2%] Performing build step for 'PATCH_BLD'
-- PATCH_BLD build command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/patch/PATCH_BLD-prefix/src/PATCH_BLD-stamp/PATCH_BLD-build-*.log
[  2%] Performing install step for 'PATCH_BLD'
-- PATCH_BLD install command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/patch/PATCH_BLD-prefix/src/PATCH_BLD-stamp/PATCH_BLD-install-*.log
[  2%] Built target PATCH_BLD-install
[  3%] Creating directories for 'RE2C_BLD'
[  4%] Creating directories for 'LEMON_BLD'
[  4%] Completed 'PATCH_BLD'
[  5%] Creating directories for 'ZLIB_BLD'
[  5%] Creating directories for 'LIEF_BLD'
[  5%] Creating directories for 'XMLTOOLS_BLD'
[  5%] Creating directories for 'ASTYLE_BLD'
[  6%] Creating directories for 'STRCLEAR_BLD'
[  6%] Performing download step (DIR copy) for 'ZLIB_BLD'
[  6%] Performing download step (DIR copy) for 'RE2C_BLD'
[  6%] Performing download step (DIR copy) for 'ASTYLE_BLD'
[  6%] Performing download step (DIR copy) for 'LEMON_BLD'
[  7%] No download step for 'XMLTOOLS_BLD'
[  7%] Performing download step (DIR copy) for 'LIEF_BLD'
[  7%] Performing download step (DIR copy) for 'STRCLEAR_BLD'
[  7%] Built target PATCH_BLD
[  7%] No update step for 'XMLTOOLS_BLD'
[  7%] Creating directories for 'REGEX_BLD'
[  7%] No update step for 'LEMON_BLD'
[  7%] No update step for 'STRCLEAR_BLD'
[  7%] No download step for 'REGEX_BLD'
[  7%] No patch step for 'XMLTOOLS_BLD'
[  7%] No update step for 'ZLIB_BLD'
[  7%] Performing patch step for 'LEMON_BLD'
patching file CMakeLists.txt
[  8%] No update step for 'ASTYLE_BLD'
[  9%] No patch step for 'STRCLEAR_BLD'
[ 10%] No update step for 'REGEX_BLD'
patching file lemon.c
patching file lempar.c
[ 10%] Performing configure step for 'XMLTOOLS_BLD'
[ 11%] Performing patch step for 'ZLIB_BLD'
[ 11%] Performing patch step for 'ASTYLE_BLD'
[ 11%] Performing configure step for 'STRCLEAR_BLD'
[ 12%] Performing configure step for 'LEMON_BLD'
[ 12%] No patch step for 'REGEX_BLD'
patching file CMakeLists.txt
patching file deflate.c
patching file gzguts.h
patching file gzread.c
patching file inftrees.c
patching file win32/zlib1.rc
patching file zconf.h
patching file zconf.h.in
patching file zlib.h
patching file zlib.h.in
patching file build/cmake/InstallOptions.cmake
patching file CMakeLists.txt
[ 12%] Performing configure step for 'ZLIB_BLD'
[ 12%] Performing configure step for 'REGEX_BLD'
[ 12%] Performing configure step for 'ASTYLE_BLD'
[ 13%] No update step for 'LIEF_BLD'
[ 13%] Performing patch step for 'LIEF_BLD'
patching file CMakeLists.txt
patching file include/LIEF/Abstract/Header.hpp
Hunk #1 succeeded at 16 with fuzz 1.
[ 13%] Performing configure step for 'LIEF_BLD'
[ 13%] No update step for 'RE2C_BLD'
[ 13%] Performing patch step for 'RE2C_BLD'
-- ASTYLE_BLD configure command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/astyle/ASTYLE_BLD-prefix/src/ASTYLE_BLD-stamp/ASTYLE_BLD-configure-*.log
patching file CMakeLists.txt
[ 13%] Performing build step for 'ASTYLE_BLD'
[ 14%] Performing configure step for 'RE2C_BLD'
-- LEMON_BLD configure command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/lemon/LEMON_BLD-prefix/src/LEMON_BLD-stamp/LEMON_BLD-configure-*.log
[ 14%] Performing build step for 'LEMON_BLD'
-- REGEX_BLD configure command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/regex/REGEX_BLD-prefix/src/REGEX_BLD-stamp/REGEX_BLD-configure-*.log
[ 15%] Performing build step for 'REGEX_BLD'
-- ASTYLE_BLD build command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/astyle/ASTYLE_BLD-prefix/src/ASTYLE_BLD-stamp/ASTYLE_BLD-build-*.log
[ 16%] Performing install step for 'ASTYLE_BLD'
-- LEMON_BLD build command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/lemon/LEMON_BLD-prefix/src/LEMON_BLD-stamp/LEMON_BLD-build-*.log
[ 16%] Performing install step for 'LEMON_BLD'
-- ASTYLE_BLD install command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/astyle/ASTYLE_BLD-prefix/src/ASTYLE_BLD-stamp/ASTYLE_BLD-install-*.log
[ 16%] Built target ASTYLE_BLD-install
-- LEMON_BLD install command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/lemon/LEMON_BLD-prefix/src/LEMON_BLD-stamp/LEMON_BLD-install-*.log
[ 16%] Built target LEMON_BLD-install
-- REGEX_BLD build command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/regex/REGEX_BLD-prefix/src/REGEX_BLD-stamp/REGEX_BLD-build-*.log
[ 16%] Creating directories for 'NETPBM_BLD'
[ 16%] Performing install step for 'REGEX_BLD'
[ 16%] Creating directories for 'JPEG_BLD'
[ 17%] No download step for 'NETPBM_BLD'
[ 17%] Performing download step (DIR copy) for 'JPEG_BLD'
[ 17%] No update step for 'NETPBM_BLD'
[ 17%] No patch step for 'NETPBM_BLD'
-- REGEX_BLD install command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/regex/REGEX_BLD-prefix/src/REGEX_BLD-stamp/REGEX_BLD-install-*.log
[ 18%] Performing configure step for 'NETPBM_BLD'
[ 18%] Built target REGEX_BLD-install
[ 19%] Creating directories for 'UTAHRLE_BLD'
[ 20%] No update step for 'JPEG_BLD'
[ 20%] No download step for 'UTAHRLE_BLD'
[ 20%] No patch step for 'JPEG_BLD'
[ 20%] No update step for 'UTAHRLE_BLD'
[ 20%] Performing configure step for 'JPEG_BLD'
[ 21%] No patch step for 'UTAHRLE_BLD'
-- ZLIB_BLD configure command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/zlib/ZLIB_BLD-prefix/src/ZLIB_BLD-stamp/ZLIB_BLD-configure-*.log
-- LIEF_BLD configure command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/lief/LIEF_BLD-prefix/src/LIEF_BLD-stamp/LIEF_BLD-configure-*.log
[ 21%] Performing build step for 'ZLIB_BLD'
[ 21%] Performing configure step for 'UTAHRLE_BLD'
[ 22%] Performing build step for 'LIEF_BLD'
-- STRCLEAR_BLD configure command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/strclear/STRCLEAR_BLD-prefix/src/STRCLEAR_BLD-stamp/STRCLEAR_BLD-configure-*.log
[ 22%] Performing build step for 'STRCLEAR_BLD'
-- STRCLEAR_BLD build command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/strclear/STRCLEAR_BLD-prefix/src/STRCLEAR_BLD-stamp/STRCLEAR_BLD-build-*.log
[ 23%] Performing install step for 'STRCLEAR_BLD'
-- STRCLEAR_BLD install command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/strclear/STRCLEAR_BLD-prefix/src/STRCLEAR_BLD-stamp/STRCLEAR_BLD-install-*.log
[ 23%] Built target STRCLEAR_BLD-install
[ 24%] Creating directories for 'LMDB_BLD'
[ 24%] Performing download step (DIR copy) for 'LMDB_BLD'
[ 24%] No update step for 'LMDB_BLD'
[ 25%] Performing patch step for 'LMDB_BLD'
patching file CMakeLists.txt
patching file libraries/liblmdb/lmdb.h
patching file libraries/liblmdb/mdb.c
Hunk #1 succeeded at 7992 (offset 57 lines).
[ 25%] Performing configure step for 'LMDB_BLD'
-- ZLIB_BLD build command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/zlib/ZLIB_BLD-prefix/src/ZLIB_BLD-stamp/ZLIB_BLD-build-*.log
[ 26%] Performing install step for 'ZLIB_BLD'
-- ZLIB_BLD install command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/zlib/ZLIB_BLD-prefix/src/ZLIB_BLD-stamp/ZLIB_BLD-install-*.log
[ 26%] Built target ZLIB_BLD-install
[ 26%] Creating directories for 'EIGEN_BLD'
[ 26%] Performing download step (DIR copy) for 'EIGEN_BLD'
-- UTAHRLE_BLD configure command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/utahrle/UTAHRLE_BLD-prefix/src/UTAHRLE_BLD-stamp/UTAHRLE_BLD-configure-*.log
[ 26%] Performing build step for 'UTAHRLE_BLD'
[ 27%] No update step for 'EIGEN_BLD'
[ 27%] Performing patch step for 'EIGEN_BLD'
patching file CMakeLists.txt
patching file Eigen/src/Core/util/Memory.h
[ 27%] Performing configure step for 'EIGEN_BLD'
-- LMDB_BLD configure command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/lmdb/LMDB_BLD-prefix/src/LMDB_BLD-stamp/LMDB_BLD-configure-*.log
[ 27%] Performing build step for 'LMDB_BLD'
-- UTAHRLE_BLD build command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/utahrle/UTAHRLE_BLD-prefix/src/UTAHRLE_BLD-stamp/UTAHRLE_BLD-build-*.log
[ 28%] Performing install step for 'UTAHRLE_BLD'
-- LMDB_BLD build command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/lmdb/LMDB_BLD-prefix/src/LMDB_BLD-stamp/LMDB_BLD-build-*.log
[ 28%] Performing install step for 'LMDB_BLD'
-- UTAHRLE_BLD install command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/utahrle/UTAHRLE_BLD-prefix/src/UTAHRLE_BLD-stamp/UTAHRLE_BLD-install-*.log
-- LMDB_BLD install command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/lmdb/LMDB_BLD-prefix/src/LMDB_BLD-stamp/LMDB_BLD-install-*.log
[ 28%] Built target UTAHRLE_BLD-install
[ 28%] Built target LMDB_BLD-install
[ 29%] Creating directories for 'SQLITE3_BLD'
[ 29%] Creating directories for 'TINYGLTF_BLD'
[ 29%] Performing download step (DIR copy) for 'SQLITE3_BLD'
[ 30%] Performing download step (DIR copy) for 'TINYGLTF_BLD'
[ 30%] No update step for 'SQLITE3_BLD'
[ 31%] Performing patch step for 'SQLITE3_BLD'
patching file CMakeLists.txt
[ 31%] Performing configure step for 'SQLITE3_BLD'
-- JPEG_BLD configure command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/jpeg/JPEG_BLD-prefix/src/JPEG_BLD-stamp/JPEG_BLD-configure-*.log
[ 31%] Performing build step for 'JPEG_BLD'
[ 31%] No update step for 'TINYGLTF_BLD'
[ 31%] No patch step for 'TINYGLTF_BLD'
-- NETPBM_BLD configure command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/netpbm/NETPBM_BLD-prefix/src/NETPBM_BLD-stamp/NETPBM_BLD-configure-*.log
[ 31%] Performing build step for 'NETPBM_BLD'
[ 32%] Performing configure step for 'TINYGLTF_BLD'
-- TINYGLTF_BLD configure command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/tinygltf/TINYGLTF_BLD-prefix/src/TINYGLTF_BLD-stamp/TINYGLTF_BLD-configure-*.log
[ 32%] Performing build step for 'TINYGLTF_BLD'
-- SQLITE3_BLD configure command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/sqlite3/SQLITE3_BLD-prefix/src/SQLITE3_BLD-stamp/SQLITE3_BLD-configure-*.log
[ 32%] Performing build step for 'SQLITE3_BLD'
-- TINYGLTF_BLD build command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/tinygltf/TINYGLTF_BLD-prefix/src/TINYGLTF_BLD-stamp/TINYGLTF_BLD-build-*.log
[ 32%] Performing install step for 'TINYGLTF_BLD'
-- RE2C_BLD configure command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/re2c/RE2C_BLD-prefix/src/RE2C_BLD-stamp/RE2C_BLD-configure-*.log
-- NETPBM_BLD build command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/netpbm/NETPBM_BLD-prefix/src/NETPBM_BLD-stamp/NETPBM_BLD-build-*.log
[ 32%] Performing build step for 'RE2C_BLD'
[ 32%] Performing install step for 'NETPBM_BLD'
-- TINYGLTF_BLD install command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/tinygltf/TINYGLTF_BLD-prefix/src/TINYGLTF_BLD-stamp/TINYGLTF_BLD-install-*.log
[ 32%] Built target TINYGLTF_BLD-install
-- NETPBM_BLD install command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/netpbm/NETPBM_BLD-prefix/src/NETPBM_BLD-stamp/NETPBM_BLD-install-*.log
[ 32%] Creating directories for 'PUGIXML_BLD'
[ 32%] Built target NETPBM_BLD-install
[ 32%] Creating directories for 'CLIPPER2_BLD'
[ 32%] Performing download step (DIR copy) for 'PUGIXML_BLD'
[ 33%] Performing download step (DIR copy) for 'CLIPPER2_BLD'
[ 34%] No update step for 'PUGIXML_BLD'
[ 34%] No update step for 'CLIPPER2_BLD'
[ 34%] No patch step for 'PUGIXML_BLD'
[ 34%] No patch step for 'CLIPPER2_BLD'
-- SQLITE3_BLD build command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/sqlite3/SQLITE3_BLD-prefix/src/SQLITE3_BLD-stamp/SQLITE3_BLD-build-*.log
[ 34%] Performing configure step for 'PUGIXML_BLD'
[ 34%] Performing install step for 'SQLITE3_BLD'
[ 35%] Performing configure step for 'CLIPPER2_BLD'
-- SQLITE3_BLD install command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/sqlite3/SQLITE3_BLD-prefix/src/SQLITE3_BLD-stamp/SQLITE3_BLD-install-*.log
[ 35%] Built target SQLITE3_BLD-install
[ 36%] Creating directories for 'GTE_BLD'
[ 36%] Performing download step (DIR copy) for 'GTE_BLD'
-- PUGIXML_BLD configure command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/pugixml/PUGIXML_BLD-prefix/src/PUGIXML_BLD-stamp/PUGIXML_BLD-configure-*.log
[ 36%] Performing build step for 'PUGIXML_BLD'
-- CLIPPER2_BLD configure command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/clipper2/CLIPPER2_BLD-prefix/src/CLIPPER2_BLD-stamp/CLIPPER2_BLD-configure-*.log
[ 36%] Performing build step for 'CLIPPER2_BLD'
-- PUGIXML_BLD build command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/pugixml/PUGIXML_BLD-prefix/src/PUGIXML_BLD-stamp/PUGIXML_BLD-build-*.log
[ 37%] Performing install step for 'PUGIXML_BLD'
-- PUGIXML_BLD install command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/pugixml/PUGIXML_BLD-prefix/src/PUGIXML_BLD-stamp/PUGIXML_BLD-install-*.log
[ 37%] Built target PUGIXML_BLD-install
[ 38%] Creating directories for 'MMESH_BLD'
[ 38%] Performing download step (DIR copy) for 'MMESH_BLD'
-- CLIPPER2_BLD build command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/clipper2/CLIPPER2_BLD-prefix/src/CLIPPER2_BLD-stamp/CLIPPER2_BLD-build-*.log
[ 38%] Performing install step for 'CLIPPER2_BLD'
[ 38%] No update step for 'MMESH_BLD'
[ 39%] No patch step for 'MMESH_BLD'
[ 39%] Performing configure step for 'MMESH_BLD'
-- CLIPPER2_BLD install command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/clipper2/CLIPPER2_BLD-prefix/src/CLIPPER2_BLD-stamp/CLIPPER2_BLD-install-*.log
[ 39%] No update step for 'GTE_BLD'
[ 39%] Built target CLIPPER2_BLD-install
[ 39%] Creating directories for 'OPENMESH_BLD'
[ 40%] Performing patch step for 'GTE_BLD'
patching file CMakeLists.txt
[ 40%] Performing configure step for 'GTE_BLD'
[ 41%] Performing download step (DIR copy) for 'OPENMESH_BLD'
[ 41%] No update step for 'OPENMESH_BLD'
[ 41%] Performing patch step for 'OPENMESH_BLD'
patching file cmake-library/VCI/VCICommon.cmake
patching file CMakeLists.txt
patching file src/OpenMesh/Core/CMakeLists.txt
[ 42%] Performing configure step for 'OPENMESH_BLD'
-- GTE_BLD configure command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/gte/GTE_BLD-prefix/src/GTE_BLD-stamp/GTE_BLD-configure-*.log
[ 42%] Performing build step for 'GTE_BLD'
-- GTE_BLD build command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/gte/GTE_BLD-prefix/src/GTE_BLD-stamp/GTE_BLD-build-*.log
[ 43%] Performing install step for 'GTE_BLD'
-- MMESH_BLD configure command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/mmesh/MMESH_BLD-prefix/src/MMESH_BLD-stamp/MMESH_BLD-configure-*.log
[ 43%] Performing build step for 'MMESH_BLD'
-- GTE_BLD install command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/gte/GTE_BLD-prefix/src/GTE_BLD-stamp/GTE_BLD-install-*.log
[ 43%] Built target GTE_BLD-install
[ 43%] Creating directories for 'OPENNURBS_BLD'
[ 43%] Performing download step (DIR copy) for 'OPENNURBS_BLD'
-- OPENMESH_BLD configure command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/openmesh/OPENMESH_BLD-prefix/src/OPENMESH_BLD-stamp/OPENMESH_BLD-configure-*.log
[ 43%] Performing build step for 'OPENMESH_BLD'
[ 44%] No update step for 'OPENNURBS_BLD'
-- MMESH_BLD build command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/mmesh/MMESH_BLD-prefix/src/MMESH_BLD-stamp/MMESH_BLD-build-*.log
[ 45%] Performing install step for 'MMESH_BLD'
[ 45%] Performing patch step for 'OPENNURBS_BLD'
patching file android_uuid/COPYING
patching file opennurbs_brep.cpp
patching file opennurbs_brep.h
patching file CMake/FindZLIB.cmake
patching file CMakeLists.txt
patching file opennurbs_compress.cpp
patching file opennurbs_defines.h
patching file opennurbs_defines.cpp
patching file example_brep/example_brep.cpp
patching file example_gl/example_gl.cpp
patching file opennurbs_file_utilities.cpp
-- MMESH_BLD install command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/mmesh/MMESH_BLD-prefix/src/MMESH_BLD-stamp/MMESH_BLD-install-*.log
patching file opennurbs_font.cpp
[ 45%] Built target MMESH_BLD-install
patching file opennurbs_locale.cpp
patching file opennurbs_locale.h
patching file opennurbs_object_history.cpp
patching file opennurbs_optimize.h
patching file opennurbs_polyline.cpp
patching file opennurbs_precompiledheader.cpp
patching file opennurbs_string_format.cpp
patching file opennurbs_system.h
patching file opennurbs_system_runtime.h
patching file opennurbs_uuid.cpp
patching file opennurbs_version_number.cpp
patching file opennurbs_x.cpp
patching file opennurbs_x.h
patching file opennurbs.h
patching file opennurbs_zlib.cpp
patching file opennurbs_zlib.h
patching file CMakeLists.txt
Hunk #2 succeeded at 344 (offset 1 line).
patching file opennurbs_3dm_settings.cpp
Hunk #1 succeeded at 992 (offset 16 lines).
patching file opennurbs_3dm_settings.h
Hunk #1 succeeded at 836 (offset 3 lines).
patching file opennurbs_extensions.cpp
Hunk #2 succeeded at 4970 (offset -5 line).
patching file opennurbs.h
patching file opennurbs_internal_defines.h
Hunk #1 succeeded at 49 (offset -1 line).
patching file opennurbs_3dm_attributes.cpp
[ 46%] Creating directories for 'OSMESA_BLD'
[ 46%] Performing configure step for 'OPENNURBS_BLD'
[ 46%] Performing download step (DIR copy) for 'OSMESA_BLD'
[ 46%] No update step for 'OSMESA_BLD'
[ 46%] No patch step for 'OSMESA_BLD'
[ 47%] Performing configure step for 'OSMESA_BLD'
-- LIEF_BLD build command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/lief/LIEF_BLD-prefix/src/LIEF_BLD-stamp/LIEF_BLD-build-*.log
[ 47%] Performing install step for 'LIEF_BLD'
-- LIEF_BLD install command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/lief/LIEF_BLD-prefix/src/LIEF_BLD-stamp/LIEF_BLD-install-*.log
[ 47%] Built target LIEF_BLD-install
[ 47%] Creating directories for 'GEOGRAM_BLD'
-- OSMESA_BLD configure command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/osmesa/OSMESA_BLD-prefix/src/OSMESA_BLD-stamp/OSMESA_BLD-configure-*.log
[ 47%] Performing download step (DIR copy) for 'GEOGRAM_BLD'
[ 47%] Performing build step for 'OSMESA_BLD'
-- OPENNURBS_BLD configure command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/opennurbs/OPENNURBS_BLD-prefix/src/OPENNURBS_BLD-stamp/OPENNURBS_BLD-configure-*.log
[ 48%] Performing build step for 'OPENNURBS_BLD'
[ 49%] No update step for 'GEOGRAM_BLD'
[ 49%] Performing patch step for 'GEOGRAM_BLD'
patching file CMakeLists.txt
Hunk #1 succeeded at 89 (offset 1 line).
patching file src/lib/geogram/CMakeLists.txt
patching file cmake/platforms/Linux-clang.cmake
patching file cmake/FindGeogram.cmake
patching file cmake/platforms/Windows-vs.cmake
patching file src/tutorial/01_basics/hello_geogram/FindGeogram.cmake
patching file src/tutorial/01_basics/hello_GLUP_app/FindGeogram.cmake
patching file cmake/platforms/FreeBSD/config.cmake
patching file cmake/platforms/FreeBSD/setvars.sh
patching file cmake/platforms/FreeBSD-clang.cmake
patching file cmake/platforms/FreeBSD.cmake
patching file CMakeLists.txt
patching file src/lib/geogram/basic/algorithm.h
patching file src/lib/geogram/basic/command_line.cpp
patching file src/lib/geogram/basic/common.h
patching file src/lib/geogram/lua/lua_io.cpp
patching file src/lib/geogram/NL/nl_private.h
[ 49%] Performing configure step for 'GEOGRAM_BLD'
-- OPENMESH_BLD build command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/openmesh/OPENMESH_BLD-prefix/src/OPENMESH_BLD-stamp/OPENMESH_BLD-build-*.log
[ 49%] Performing install step for 'OPENMESH_BLD'
-- OPENMESH_BLD install command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/openmesh/OPENMESH_BLD-prefix/src/OPENMESH_BLD-stamp/OPENMESH_BLD-install-*.log
[ 49%] Built target OPENMESH_BLD-install
-- GEOGRAM_BLD configure command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/geogram/GEOGRAM_BLD-prefix/src/GEOGRAM_BLD-stamp/GEOGRAM_BLD-configure-*.log
[ 50%] Performing build step for 'GEOGRAM_BLD'
-- EIGEN_BLD configure command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/eigen/EIGEN_BLD-prefix/src/EIGEN_BLD-stamp/EIGEN_BLD-configure-*.log
[ 51%] Performing build step for 'EIGEN_BLD'
-- XMLTOOLS_BLD configure command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/xmltools/XMLTOOLS_BLD-prefix/src/XMLTOOLS_BLD-stamp/XMLTOOLS_BLD-configure-*.log
[ 52%] Performing build step for 'XMLTOOLS_BLD'
-- EIGEN_BLD build command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/eigen/EIGEN_BLD-prefix/src/EIGEN_BLD-stamp/EIGEN_BLD-build-*.log
[ 52%] Performing install step for 'EIGEN_BLD'
-- EIGEN_BLD install command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/eigen/EIGEN_BLD-prefix/src/EIGEN_BLD-stamp/EIGEN_BLD-install-*.log
[ 52%] Built target EIGEN_BLD-install
[ 52%] Creating directories for 'TCL_BLD'
[ 53%] Performing download step (DIR copy) for 'TCL_BLD'
[ 53%] No update step for 'TCL_BLD'
[ 53%] Performing patch step for 'TCL_BLD'
patching file generic/tclConfig.c
patching file macosx/configure
patching file macosx/Tcl-Common.xcconfig
patching file macosx/Tcl.xcode/project.pbxproj
patching file macosx/Tcl.xcodeproj/project.pbxproj
patching file unix/configure
patching file unix/configure.in
patching file unix/Makefile.in
patching file win/configure
patching file win/configure.in
patching file win/Makefile.in
patching file win/makefile.vc
patching file macosx/GNUmakefile
patching file pkgs/itcl4.2.3/Makefile.in
patching file pkgs/sqlite3.40.0/Makefile.in
patching file pkgs/sqlite3.40.0/win/makefile.vc
patching file pkgs/tdbc1.1.5/Makefile.in
patching file pkgs/tdbc1.1.5/win/makefile.vc
patching file pkgs/tdbcmysql1.1.5/Makefile.in
patching file pkgs/tdbcmysql1.1.5/win/makefile.vc
patching file pkgs/tdbcodbc1.1.5/Makefile.in
patching file pkgs/tdbcodbc1.1.5/win/makefile.vc
patching file pkgs/tdbcpostgres1.1.5/Makefile.in
patching file pkgs/tdbcpostgres1.1.5/win/makefile.vc
patching file pkgs/tdbcsqlite3-1.1.5/Makefile.in
patching file pkgs/tdbcsqlite3-1.1.5/win/makefile.vc
patching file pkgs/thread2.8.8/Makefile.in
patching file pkgs/thread2.8.8/win/makefile.vc
patching file unix/Makefile.in
patching file win/makefile.vc
Hunk #1 succeeded at 444 with fuzz 1 (offset -4 line).
patching file macosx/configure
patching file pkgs/itcl4.2.3/tclconfig/tcl.m4
patching file pkgs/sqlite3.40.0/tclconfig/tcl.m4
patching file pkgs/tdbc1.1.5/tclconfig/tcl.m4
patching file pkgs/tdbcmysql1.1.5/tclconfig/tcl.m4
patching file pkgs/tdbcodbc1.1.5/tclconfig/tcl.m4
patching file pkgs/tdbcpostgres1.1.5/tclconfig/tcl.m4
patching file pkgs/tdbcsqlite3-1.1.5/tclconfig/tcl.m4
patching file pkgs/thread2.8.8/tclconfig/tcl.m4
patching file unix/configure
patching file unix/configure.in
[ 54%] Performing configure step for 'TCL_BLD'
-- OSMESA_BLD build command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/osmesa/OSMESA_BLD-prefix/src/OSMESA_BLD-stamp/OSMESA_BLD-build-*.log
[ 54%] Performing install step for 'OSMESA_BLD'
-- OSMESA_BLD install command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/osmesa/OSMESA_BLD-prefix/src/OSMESA_BLD-stamp/OSMESA_BLD-install-*.log
[ 54%] Built target OSMESA_BLD-install
-- XMLTOOLS_BLD build command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/xmltools/XMLTOOLS_BLD-prefix/src/XMLTOOLS_BLD-stamp/XMLTOOLS_BLD-build-*.log
[ 54%] Performing install step for 'XMLTOOLS_BLD'
-- JPEG_BLD build command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/jpeg/JPEG_BLD-prefix/src/JPEG_BLD-stamp/JPEG_BLD-build-*.log
[ 55%] Performing install step for 'JPEG_BLD'
-- XMLTOOLS_BLD install command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/xmltools/XMLTOOLS_BLD-prefix/src/XMLTOOLS_BLD-stamp/XMLTOOLS_BLD-install-*.log
[ 55%] Built target XMLTOOLS_BLD-install
[ 55%] Completed 'ASTYLE_BLD'
[ 55%] Built target ASTYLE_BLD
[ 56%] Completed 'LEMON_BLD'
[ 56%] Built target LEMON_BLD
[ 56%] Completed 'STRCLEAR_BLD'
[ 56%] Built target STRCLEAR_BLD
[ 56%] Completed 'XMLTOOLS_BLD'
[ 56%] Built target XMLTOOLS_BLD
[ 56%] Completed 'LIEF_BLD'
[ 56%] Built target LIEF_BLD
[ 56%] Creating directories for 'PLIEF_BLD'
[ 57%] Performing download step (DIR copy) for 'PLIEF_BLD'
[ 57%] No update step for 'PLIEF_BLD'
[ 57%] No patch step for 'PLIEF_BLD'
[ 57%] Performing configure step for 'PLIEF_BLD'
-- JPEG_BLD install command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/jpeg/JPEG_BLD-prefix/src/JPEG_BLD-stamp/JPEG_BLD-install-*.log
[ 57%] Built target JPEG_BLD-install
[ 57%] Completed 'ZLIB_BLD'
[ 57%] Built target ZLIB_BLD
[ 57%] Completed 'REGEX_BLD'
[ 57%] Built target REGEX_BLD
[ 57%] Completed 'NETPBM_BLD'
[ 57%] Built target NETPBM_BLD
[ 57%] Completed 'JPEG_BLD'
-- PLIEF_BLD configure command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/plief/PLIEF_BLD-prefix/src/PLIEF_BLD-stamp/PLIEF_BLD-configure-*.log
[ 57%] Built target JPEG_BLD
[ 58%] Performing build step for 'PLIEF_BLD'
[ 58%] Creating directories for 'PNG_BLD'
[ 58%] Performing download step (DIR copy) for 'PNG_BLD'
[ 58%] No update step for 'PNG_BLD'
[ 59%] Performing patch step for 'PNG_BLD'
patching file CMake/FindZLIB.cmake
patching file CMakeLists.txt
Hunk #2 succeeded at 50 (offset -1 line).
Hunk #3 succeeded at 117 (offset 14 lines).
Hunk #4 succeeded at 494 (offset -2 line).
Hunk #6 succeeded at 1077 (offset 4 lines).
[ 59%] Performing configure step for 'PNG_BLD'
-- PLIEF_BLD build command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/plief/PLIEF_BLD-prefix/src/PLIEF_BLD-stamp/PLIEF_BLD-build-*.log
-- PNG_BLD configure command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/png/PNG_BLD-prefix/src/PNG_BLD-stamp/PNG_BLD-configure-*.log
[ 59%] Performing install step for 'PLIEF_BLD'
[ 59%] Performing build step for 'PNG_BLD'
-- PLIEF_BLD install command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/plief/PLIEF_BLD-prefix/src/PLIEF_BLD-stamp/PLIEF_BLD-install-*.log
[ 59%] Built target PLIEF_BLD-install
-- PNG_BLD build command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/png/PNG_BLD-prefix/src/PNG_BLD-stamp/PNG_BLD-build-*.log
[ 60%] Performing install step for 'PNG_BLD'
-- PNG_BLD install command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/png/PNG_BLD-prefix/src/PNG_BLD-stamp/PNG_BLD-install-*.log
[ 60%] Built target PNG_BLD-install
[ 60%] Creating directories for 'TIFF_BLD'
[ 60%] Performing download step (DIR copy) for 'TIFF_BLD'
[ 60%] No update step for 'TIFF_BLD'
[ 61%] Performing patch step for 'TIFF_BLD'
patching file cmake/FindJPEG.cmake
patching file cmake/FindZLIB.cmake
patching file CMakeLists.txt
[ 61%] Performing configure step for 'TIFF_BLD'
-- TCL_BLD configure command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/tcl/TCL_BLD-prefix/src/TCL_BLD-stamp/TCL_BLD-configure-*.log
[ 61%] Performing build step for 'TCL_BLD'
-- RE2C_BLD build command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/re2c/RE2C_BLD-prefix/src/RE2C_BLD-stamp/RE2C_BLD-build-*.log
[ 61%] Performing install step for 'RE2C_BLD'
-- RE2C_BLD install command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/re2c/RE2C_BLD-prefix/src/RE2C_BLD-stamp/RE2C_BLD-install-*.log
[ 61%] Built target RE2C_BLD-install
[ 61%] Completed 'UTAHRLE_BLD'
[ 61%] Built target UTAHRLE_BLD
[ 62%] Completed 'LMDB_BLD'
[ 62%] Built target LMDB_BLD
[ 62%] Completed 'EIGEN_BLD'
[ 62%] Built target EIGEN_BLD
[ 63%] Completed 'SQLITE3_BLD'
[ 63%] Built target SQLITE3_BLD
[ 63%] Creating directories for 'PROJ_BLD'
[ 64%] Performing download step (DIR copy) for 'PROJ_BLD'
[ 64%] No update step for 'PROJ_BLD'
[ 64%] Performing patch step for 'PROJ_BLD'
patching file cmake/FindSQLite3.cmake
patching file CMakeLists.txt
Hunk #1 succeeded at 199 (offset 2 lines).
[ 65%] Performing configure step for 'PROJ_BLD'
CMake Error at /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/geogram/GEOGRAM_BLD-prefix/src/GEOGRAM_BLD-stamp/GEOGRAM_BLD-build-Release.cmake:37 (message):
  Command failed: 2

   '/usr/bin/gmake''slacon2_':
/home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/geogram/GEOGRAM_BLD-prefix/src/GEOGRAM_BLD/src/lib/third_party/numerics/SUPERLU/slacon2.c:163:27: error: passing argument 2 of 'idamax_' from incompatible pointer type [-Wincompatible-pointer-types]
  163 |     isave[1] = idamax_(n, &x[0], &c__1);  /* j */
      |                           ^~~~~
      |                           |
      |                           float *
/home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/geogram/GEOGRAM_BLD-prefix/src/GEOGRAM_BLD/src/lib/third_party/numerics/SUPERLU/slacon2.c:25:27: note: expected 'double *' but argument is of type 'float *'
   25 | extern int idamax_(int *, double *, int *);
      |                           ^~~~~~~~
gmake[5]: *** [src/lib/third_party/numerics/CMakeFiles/geogram_num_3rdparty.dir/build.make:7930: src/lib/third_party/numerics/CMakeFiles/geogram_num_3rdparty.dir/SUPERLU/slacon2.c.o] Error 1
gmake[4]: *** [CMakeFiles/Makefile2:227: src/lib/third_party/numerics/CMakeFiles/geogram_num_3rdparty.dir/all] Error 2
gmake[4]: *** Waiting for unfinished jobs....
In file included from /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/geogram/GEOGRAM_BLD-prefix/src/GEOGRAM_BLD/src/lib/geogram/image/image_serializer_stb.cpp:85:
/home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/geogram/GEOGRAM_BLD-prefix/src/GEOGRAM_BLD/src/lib/geogram/third_party/stb_image/stb_image.h: In function 'int stbi__parse_png_file(stbi__png*, int, int)':
/home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/geogram/GEOGRAM_BLD-prefix/src/GEOGRAM_BLD/src/lib/geogram/third_party/stb_image/stb_image.h:5166:56: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
 5166 |                   for (k = 0; k < s->img_n; ++k) tc[k] = (stbi_uc)(stbi__get16be(s) & 255) * stbi__depth_scale_table[z->depth]; // non 8-bit images will be larger
      |                                                  ~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/geogram/GEOGRAM_BLD-prefix/src/GEOGRAM_BLD/src/lib/geogram/third_party/stb_image/stb_image.h:5082:25: note: at offset 3 into destination object 'tc' of size 3
 5082 |    stbi_uc has_trans=0, tc[3]={0};
      |                         ^~
gmake[3]: *** [Makefile:156: all] Error 2

CMake Error at /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/geogram/GEOGRAM_BLD-prefix/src/GEOGRAM_BLD-stamp/GEOGRAM_BLD-build-Release.cmake:47 (message):
  Stopping after outputting logs.


gmake[2]: *** [geogram/CMakeFiles/GEOGRAM_BLD-install.dir/build.make:83: geogram/GEOGRAM_BLD-prefix/src/GEOGRAM_BLD-stamp/GEOGRAM_BLD-build] Error 1
gmake[1]: *** [CMakeFiles/Makefile2:2737: geogram/CMakeFiles/GEOGRAM_BLD-install.dir/all] Error 2
gmake[1]: *** Waiting for unfinished jobs....
-- PROJ_BLD configure command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/proj/PROJ_BLD-prefix/src/PROJ_BLD-stamp/PROJ_BLD-configure-*.log
[ 65%] Performing build step for 'PROJ_BLD'
-- TIFF_BLD configure command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/tiff/TIFF_BLD-prefix/src/TIFF_BLD-stamp/TIFF_BLD-configure-*.log
[ 65%] Performing build step for 'TIFF_BLD'
-- TIFF_BLD build command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/tiff/TIFF_BLD-prefix/src/TIFF_BLD-stamp/TIFF_BLD-build-*.log
[ 66%] Performing install step for 'TIFF_BLD'
-- TIFF_BLD install command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/tiff/TIFF_BLD-prefix/src/TIFF_BLD-stamp/TIFF_BLD-install-*.log
[ 66%] Built target TIFF_BLD-install
-- TCL_BLD build command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/tcl/TCL_BLD-prefix/src/TCL_BLD-stamp/TCL_BLD-build-*.log
[ 66%] Performing install step for 'TCL_BLD'
-- TCL_BLD install command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/tcl/TCL_BLD-prefix/src/TCL_BLD-stamp/TCL_BLD-install-*.log
[ 66%] Built target TCL_BLD-install
-- PROJ_BLD build command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/proj/PROJ_BLD-prefix/src/PROJ_BLD-stamp/PROJ_BLD-build-*.log
[ 66%] Performing install step for 'PROJ_BLD'
-- PROJ_BLD install command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/proj/PROJ_BLD-prefix/src/PROJ_BLD-stamp/PROJ_BLD-install-*.log
[ 66%] Built target PROJ_BLD-install
-- OPENNURBS_BLD build command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/opennurbs/OPENNURBS_BLD-prefix/src/OPENNURBS_BLD-stamp/OPENNURBS_BLD-build-*.log
[ 66%] Performing install step for 'OPENNURBS_BLD'
-- OPENNURBS_BLD install command succeeded.  See also /home/abhinav/aaabnv/FreeBRLCAD/DEV_BRLCAD/brlcad/build/bext_build/opennurbs/OPENNURBS_BLD-prefix/src/OPENNURBS_BLD-stamp/OPENNURBS_BLD-install-*.log
[ 66%] Built target OPENNURBS_BLD-install
gmake: *** [Makefile:91: all] Error 2
CMake Error at misc/CMake/BRLCAD_Util.cmake:102 (_message):
  Unable to successfully build bext dependency repository
Call Stack (most recent call first):
  misc/CMake/BRLCAD_EXT_Setup.cmake:443 (message)
  misc/CMake/BRLCAD_ExternalDeps.cmake:529 (brlcad_ext_setup)
  CMakeLists.txt:2091 (brlcad_bext_process)


-- Configuring incomplete, errors occurred!